# ViNO Cluster Operator

[![Docker Repository on Quay](https://quay.io/repository/airshipit/vino/status "Docker Repository on Quay")](https://quay.io/repository/airshipit/vino)

## Overview

The lifecycle of the Virtual Machines and their relationship to the Kubernetes cluster will be
managed using two operators: vNode-Operator(ViNO), and the Support Infra Provider Operator (SIP).


## Description

ViNO is responsible for setting up VM infrastructure, such as:

- per-node vino pod:
    * libvirt init, e.g.
        * setup vm-infra bridge
        * provisioning tftp/dhcp definition
    * libvirt launch
    * sushi pod
- libvirt domains
- networking
- bmh objects, with labels:
    * location - i.e. `rack: 8` and `node: rdm8r008c002` - should follow k8s semi-standard
    * vm role - i.e. `node-type: worker`
    * vm flavor - i.e `node-flavor: foobar`
    * networks - i.e. `networks: [foo, bar]`
      and the details for ViNO can be found [here](https://hackmd.io/KSu8p4QeTc2kXIjlrso2eA)

The Cluster Support Infrastructure Provider, or SIP, is responsible for the lifecycle of:
- identifying the correct `BareMetalHost` resources to label (or unlabel) based on scheduling
  constraints.
- extract IP address information from `BareMetalHost` objects to use in the creation of supporting
  infrastructure.
- creating support infra for the tenant k8s cluster:
    * load balancers (for tenant Kubernetes API)
    * jump pod to access the cluster and nodes via ssh
    * an OIDC provider for the tenant cluster, i.e. Dex
    * potentially more in the future

## Development Environment

### Pre-requisites

#### Install Golang 1.15+

ViNO is a project written in Go, and the make targets used to deploy ViNO leverage both Go and
Kustomize commands which require Golang be installed.

For detailed installation instructions, please see the [Golang installation guide](https://golang.org/doc/install).

#### Install Kustomize v3.2.3+

In order to apply manifests to your cluster via Make targets we suggest the use of Kustomize.

For detailed installation instructions, please see the [Kustomize installation guide](https://kubectl.docs.kubernetes.io/installation/kustomize/).

#### Proxy Setup

If your organization requires development behind a proxy server, you will need to define the
following environment variables with your organization's information:

```
HTTP_PROXY=http://username:password@host:port
HTTPS_PROXY=http://username:password@host:port
NO_PROXY="localhost,127.0.0.1,10.96.0.0/12"
PROXY=http://username:password@host:port
USE_PROXY=true
```

10.96.0.0/12 is the Kubernetes service CIDR.

#### Configure hugepages support

The default vino-builder VM flavors use 1G hugepages. To ensure hugepages support is configured
correctly at the host level, do the following:

For Ubuntu 18.04 and earlier, install the 'hugepages' package:

```
# sudo apt install hugepages
```

For later ubuntu versions, install the 'libhugetlbfs-bin' package:

```
# sudo apt install libhugetlbfs-bin
```

Then run:

```
# hugeadm --explain
```

This will display a block like the following describing the current hugepages configuration:

```
Total System Memory: 96676 MB

Mount Point          Options
/dev/hugepages       rw,relatime,pagesize=1024M

Huge page pools:
      Size Minimum Current Maximum Default
1073741824      64      64      64       *
```

In the example above, pagesize=1024M indicates a default 1GB page size for the /dev/hugepages
mount, and 64 pages are preallocated for 64GB available memory. If the default pagesize is other
than 1024M or the number of preallocated pages is insufficient for the subcluster VMs to be
created, add the parameters default_hugepagesz, hugepagesz and hugepages to the end of
GRUB_CMDLINE_LINUX_DEFAULT in your host's grub config file. For example,

```
# Set the default commandline
GRUB_CMDLINE_LINUX_DEFAULT="console=tty1 console=ttyS0 default_hugepagesz=1G hugepagesz=1G hugepages=64"
```

(In a typical Ubuntu installation, the grub configuration can usually be found at /etc/default/grub or
somewhere under /etc/grub.d. If the host is a VM built from a cloud image, the grub config may be found
at /etc/default/grub.d/50-cloudimg-settings.cfg.)

After making changes, run the following to make them take effect:

```
sudo update-grub
sudo reboot now
```

### Deploy ViNO

Airship projects often have to deploy Kubernetes, with common requirements such as supporting
network policies or working behind corporate proxies. To that end the community maintains a
Kubernetes deployment script and is the suggested way of deploying your Kubernetes cluster for
development purposes.

#### Deploy Kubernetes

```
# curl -Lo deploy-k8s.sh https://opendev.org/airship/charts/raw/branch/master/tools/gate/deploy-k8s.sh
# chmod +x deploy-k8s.sh
# sudo ./deploy-k8s.sh
```

#### (Optional) Configure Docker to run as non-root

When Kubernetes is deployed from the script above it installs Docker but does not configure it
to run as a non-root user. The shell commands below are optional to configure Docker to run as
a non-root user. They include creating the docker group, adding the current user to that group
updating the group without having to log out and testing functionality with the hello-world
container.

If you choose to skip these steps, please continue with the developer environment steps as a
root user.

```
# sudo groupadd docker
# sudo usermod -aG docker $USER
```

Log out and log back in again for the changes to take effect, then test functionality with a
hello world container.

```
# docker run hello-world
```

#### Deploy ViNO

Once your cluster is up and running, you'll need to build the ViNO image to use, and to deploy the
operator on your cluster:

```
# make docker-build-controller
# make deploy
```

Once these steps are completed, you should have a working cluster with ViNO deployed on top of it:

```
# kubectl get pods --all-namespaces
NAMESPACE     NAME                                        READY   STATUS    RESTARTS   AGE
kube-system   calico-kube-controllers-7985fc4dd6-6q5l4    1/1     Running   0          3h7m
kube-system   calico-node-lqzxp                           1/1     Running   0          3h7m
kube-system   coredns-f9fd979d6-gbdzl                     1/1     Running   0          3h7m
kube-system   etcd-ubuntu-virtualbox                      1/1     Running   0          3h8m
kube-system   kube-apiserver-ubuntu-virtualbox            1/1     Running   0          3h8m
kube-system   kube-controller-manager-ubuntu-virtualbox   1/1     Running   0          3h8m
kube-system   kube-proxy-ml4gd                            1/1     Running   0          3h7m
kube-system   kube-scheduler-ubuntu-virtualbox            1/1     Running   0          3h8m
kube-system   storage-provisioner                         1/1     Running   0          3h8m
vino-system   vino-controller-manager-788b994c74-sbf26    2/2     Running   0          25m
```
#### Configure the VM Bridge Interface
To configure the bare metal networking interface that should be used for the VM Bridge,
please specify it in your vino CR at field spec.vmBridge.

#### Test basic functionality

```
# kubectl apply -f config/samples/vino_cr.yaml
# kubectl -n vino-system get pods
# kubectl -n vino-system get ds
```

delete vino CR and make sure DaemonSet is deleted as well

```
# kubectl delete vino vino-test-cr
# kubectl -n vino-system get ds
# kubectl -n vino-system get cm
```

## Get in Touch

For any questions on the ViNo, or other Airship projects, we encourage you to join the community on
Slack/IRC or by participating in the mailing list. Please see this [Wiki](https://wiki.openstack.org/wiki/Airship#Get_in_Touch) for
contact information, and the community meeting schedules.