ansible-hardening/templates/chrony.conf.j2
Jesse Pretorius 58ac7a8a7a Enable role testing and make structure ansible-galaxy compatible
This patch adds the bits needed to implement automated syntax/lint
role testing. It also moves the role into the base repository so
that the role becomes fully compatible with ansible-galaxy to
improve the role's consumability.

Change-Id: Ia79cd5dedbbe50dfdf46688830a989ff0897832a
2015-10-09 11:47:23 +00:00

94 lines
3.3 KiB
Django/Jinja

# This the default chrony.conf file for the Debian chrony package. After
# editing this file use the command 'invoke-rc.d chrony restart' to make
# your changes take effect. John Hasler <jhasler@debian.org> 1998-2008
# See www.pool.ntp.org for an explanation of these servers. Please
# consider joining the project if possible. If you can't or don't want to
# use these servers I suggest that you try your ISP's nameservers. We mark
# the servers 'offline' so that chronyd won't try to connect when the link
# is down. Scripts in /etc/ppp/ip-up.d and /etc/ppp/ip-down.d use chronyc
# commands to switch it on when a dialup link comes up and off when it goes
# down. Code in /etc/init.d/chrony attempts to determine whether or not
# the link is up at boot time and set the online status accordingly. If
# you have an always-on connection such as cable omit the 'offline'
# directive and chronyd will default to online.
#
# Note that if Chrony tries to go "online" and dns lookup of the servers
# fails they will be discarded. Thus under some circumstances it is
# better to use IP numbers than host names.
{% for ntp_server in ntp_servers %}
server {{ ntp_server }} offline minpoll 8
{% endfor %}
# Look here for the admin password needed for chronyc. The initial
# password is generated by a random process at install time. You may
# change it if you wish.
keyfile /etc/chrony/chrony.keys
# Set runtime command key. Note that if you change the key (not the
# password) to anything other than 1 you will need to edit
# /etc/ppp/ip-up.d/chrony, /etc/ppp/ip-down.d/chrony, /etc/init.d/chrony
# and /etc/cron.weekly/chrony as these scripts use it to get the password.
commandkey 1
# I moved the driftfile to /var/lib/chrony to comply with the Debian
# filesystem standard.
driftfile /var/lib/chrony/chrony.drift
# Comment this line out to turn off logging.
log tracking measurements statistics
logdir /var/log/chrony
# Stop bad estimates upsetting machine clock.
maxupdateskew 100.0
# Dump measurements when daemon exits.
dumponexit
# Specify directory for dumping measurements.
dumpdir /var/lib/chrony
# Let computer be a server when it is unsynchronised.
local stratum 10
# Allow computers on the unrouted nets to use the server.
{% for subnet in allowed_ntp_subnets %}
allow {{ subnet }}
{% endfor %}
# This directive forces `chronyd' to send a message to syslog if it
# makes a system clock adjustment larger than a threshold value in seconds.
logchange 0.5
# This directive defines an email address to which mail should be sent
# if chronyd applies a correction exceeding a particular threshold to the
# system clock.
# mailonchange root@localhost 0.5
# This directive tells chrony to regulate the real-time clock and tells it
# Where to store related data. It may not work on some newer motherboards
# that use the HPET real-time clock. It requires enhanced real-time
# support in the kernel. I've commented it out because with certain
# combinations of motherboard and kernel it is reported to cause lockups.
# rtcfile /var/lib/chrony/chrony.rtc
# If the last line of this file reads 'rtconutc' chrony will assume that
# the CMOS clock is on UTC (GMT). If it reads '# rtconutc' or is absent
# chrony will assume local time. The line (if any) was written by the
# chrony postinst based on what it found in /etc/default/rcS. You may
# change it if necessary.
rtconutc