bifrost/playbooks/roles/bifrost-ironic-install/defaults/main.yml

---
# Cleaning turns on ironic conductor clean_nodes flag
# which causes the nodes to be wiped after deletion.
cleaning: true
# Wipe all data from the disks rather than only the metadata.
cleaning_disk_erase: false

# Enable fast_track mode for ironic which allows skipping a power
# cycle
fast_track: true

tftp_boot_folder: /tftpboot
http_boot_folder: /httpboot
ironic_tftp_master_path: /var/lib/ironic/master_images
staging_drivers_include: false
file_url_port: "8080"
file_url_port_tls: "8083"
ironicclient_source_install: false
openstacksdk_source_install: false
ironicinspector_source_install: true
ironicinspectorclient_source_install: false
sushy_source_install: false
staging_drivers_source_install: true
prometheus_exporter_source_install: true
# Setting to utilize diskimage-builder to create a bootable image.
create_image_via_dib: "{{ not use_cirros | default(false) | bool }}"
create_ipa_image: false
dib_image_type: vm
dib_os_element: "debian"
# Setting to install diskimage-builder
install_dib: "{{ create_image_via_dib | bool or create_ipa_image | bool }}"
ironic_debug: true
# If testing is true, then the environment is setup for using libvirt
# virtual machines for the hardware instead of real hardware.
testing: false

# set to true to skip installation completely
skip_install: False
# set to true to skip installing ironic dependencies
skip_package_install: False
# set to true to skip generation of configs and database configuration
skip_bootstrap: False
# set to true to skip starting ironic services and dependencies
skip_start: False
# set to true to skip performing online data migrations
skip_migrations: "{{ skip_bootstrap }}"
# set to true to skip validating the services
skip_validation: "{{ skip_start }}"

# Default network interface that bifrost will be attached to.
# This is used in ipa_* so it must be before
network_interface: "virbr0"
ans_network_interface: "{{ network_interface | replace('-', '_') }}"
internal_interface: "{{ hostvars[inventory_hostname]['ansible_' + ans_network_interface]['ipv4'] }}"
internal_ip: "{{ internal_interface['address'] }}"

# Fedora 30 did not use firewalld, 32 started relying on it.
use_firewalld: >-
  {{ ansible_distribution in ['RedHat', 'CentOS']
     or (ansible_distribution == 'Fedora'
         and ansible_distribution_major_version|int >= 32) }}
# Our own firewalld zone, only applies when testing is false.
firewalld_internal_zone: bifrost

# Normally this would setting would be http in a bifrost installation
# without TLS. This setting allows a user to override the setting in case
# the local webserver has been updated to support HTTPS.
# Note: Users wishing to leverage HTTPS should reference the iPXE
# documentation at https://ipxe.org/crypto
ipa_file_protocol: "http"

ipa_upstream_release: "master"
use_tinyipa: true

enable_uefi_ipxe: true
ipxe_efi_binary: ipxe.efi

ipa_download_headers: {}
ipa_kernel: "{{http_boot_folder}}/ipa.kernel"
ipa_ramdisk: "{{http_boot_folder}}/ipa.initramfs"
ipa_kernel_url: "{{ ipa_file_protocol }}://{{ internal_ip }}:{{ file_url_port }}/ipa.kernel"
ipa_kernel_upstream_url: >-
  {%- if use_tinyipa | bool -%}
  https://tarballs.openstack.org/ironic-python-agent/tinyipa/files/tinyipa-{{ ipa_upstream_release }}.vmlinuz
  {%- elif ipa_upstream_release == "stable-train" -%}
  https://tarballs.openstack.org/ironic-python-agent/dib/files/ipa-centos7-{{ ipa_upstream_release }}.kernel
  {%- else -%}
  https://tarballs.openstack.org/ironic-python-agent/dib/files/ipa-centos8-{{ ipa_upstream_release }}.kernel
  {%- endif -%}
ipa_kernel_upstream_checksum_algo: "sha256"
ipa_kernel_upstream_checksum_url: "{{ ipa_kernel_upstream_url }}.{{ ipa_kernel_upstream_checksum_algo }}"
ipa_ramdisk_url: "{{ ipa_file_protocol }}://{{ internal_ip }}:{{ file_url_port }}/ipa.initramfs"
ipa_ramdisk_upstream_url: >-
  {%- if use_tinyipa | bool -%}
  https://tarballs.openstack.org/ironic-python-agent/tinyipa/files/tinyipa-{{ ipa_upstream_release }}.gz
  {%- elif ipa_upstream_release == "stable-train" -%}
  https://tarballs.openstack.org/ironic-python-agent/dib/files/ipa-centos7-{{ ipa_upstream_release }}.initramfs
  {%- else -%}
  https://tarballs.openstack.org/ironic-python-agent/dib/files/ipa-centos8-{{ ipa_upstream_release }}.initramfs
  {%- endif -%}
ipa_ramdisk_upstream_checksum_algo: "sha256"
ipa_ramdisk_upstream_checksum_url: "{{ ipa_ramdisk_upstream_url }}.{{ ipa_ramdisk_upstream_checksum_algo }}"
deploy_image_filename: "deployment_image.qcow2"
deploy_image: "{{http_boot_folder}}/{{deploy_image_filename}}"
esp_image: "{{ http_boot_folder }}/esp.img"
esp_image_url: "{{ ipa_file_protocol }}://{{ internal_ip }}:{{ file_url_port }}/esp.img"
# Use cirros instead of building an image via diskimage-builder
use_cirros: false
# Download IPA by default
download_ipa: true
update_repos: true
update_ipa: "{{ update_repos }}"
# Use the DIB dynamic-login element to insert the SSH key
ipa_add_ssh_key: false
cirros_deploy_image_upstream_url: https://download.cirros-cloud.net/0.5.1/cirros-0.5.1-x86_64-disk.img
# By default bifrost will deploy dnsmasq to utilize as an integrated DHCP
# server.  If you already have a DHCP server, you can pass --disable-dhcp
# to the bifrost-cli install command to disable it.
include_dhcp_server: true
# *_git_url can be overridden by local clones for offline installs
dib_git_url: https://opendev.org/openstack/diskimage-builder
ironicclient_git_url: https://opendev.org/openstack/python-ironicclient
openstacksdk_git_url: https://opendev.org/openstack/openstacksdk
ironic_git_url: https://opendev.org/openstack/ironic
staging_drivers_git_url: https://opendev.org/x/ironic-staging-drivers
ironicinspector_git_url: https://opendev.org/openstack/ironic-inspector
ironicinspectorclient_git_url: https://opendev.org/openstack/python-ironic-inspector-client
ipa_git_url: https://opendev.org/openstack/ironic-python-agent
ipa_builder_git_url: https://opendev.org/openstack/ironic-python-agent-builder
prometheus_exporter_git_url: https://opendev.org/openstack/ironic-prometheus-exporter
mysql_username: "root"
mysql_password: ""
ironic_git_folder: /opt/stack/ironic
ironicclient_git_folder: /opt/stack/python-ironicclient
openstacksdk_git_folder: /opt/stack/openstacksdk
dib_git_folder: /opt/stack/diskimage-builder
reqs_git_folder: /opt/stack/requirements
staging_drivers_git_folder: /opt/stack/ironic-staging-drivers
ironicinspector_git_folder: /opt/stack/ironic-inspector
ironicinspectorclient_git_folder: /opt/stack/python-ironic-inspector-client
sushy_git_folder: /opt/stack/sushy
ipa_git_folder: /opt/stack/ironic-python-agent
ipa_builder_git_folder: /opt/stack/ironic-python-agent-builder
prometheus_exporter_git_folder: /opt/stack/ironic-prometheus-exporter

enabled_hardware_types: "ipmi,redfish,manual-management,ilo"
default_deploy_interface: "direct"
enabled_deploy_interfaces: "direct,ramdisk"
# These are calculated based on enabled_hardware_types if empty
enabled_bios_interfaces: ""
enabled_boot_interfaces: ""
enabled_management_interfaces: ""
enabled_power_interfaces: ""
enabled_raid_interfaces: ""
enabled_vendor_interfaces: ""

default_resource_class: baremetal

default_boot_mode: ""

enable_credential_less_deploy: false

# Extra pip packages to install with ironic
# This should be a list of pip-installable references.
# default: empty list
ironic_extra_packages: []

# DHCP pool for requests -- ignored if inventory_dhcp is set to True
# since IP allocation will be static.
dhcp_pool_start: 192.168.1.200
dhcp_pool_end: 192.168.1.250
dhcp_lease_time: 12h
dhcp_static_mask: 255.255.255.0

# Whether to enable DNS in dnsmasq. Will conflict with any other DNS server,
# hence disabled by default.
dnsmasq_enable_dns: "{{ not (dnsmasq_disable_dns | default(True) | bool) }}"
# Directory with static DHCP hosts configuration.
dnsmasq_dhcp_hostsdir: "/etc/dnsmasq.d/bifrost.dhcp-hosts.d"
# Uncomment to set up directory with additional hosts for DNS. Useless without
# dnsmasq_enable_dns set to True.
#dnsmasq_additional_hostsdir: "/etc/dnsmasq.d/bifrost.hosts.d"

# Dnsmasq default route for clients. If not defined, dnsmasq will push to clients
# as default route the same IP of the dnsmasq server.
# If set to false, it will disable default route creation in clients.
# Default: undefined
# dnsmasq_router:

# Dnsmasq default dns servers for clients. If defined, dnsmasq will use the specified
# DNS servers for name resolving.
# dnsmasq_dns_servers: 8.8.8.8,8.8.4.4

# Support for CORS configuration
# By default CORS support is disabled.
enable_cors: false
# Origin to accept for CORS requests
cors_allowed_origin: "http://localhost:8000"
# bifrost utilizes noauth mode by default and as such
# the setting should be set to false. This setting should
# not need to be modified by the user.
enable_cors_credential_support: false

ironic_store_ramdisk_logs: true
# The path to the directory where the deployment logs should be stored when using
# local storage.
ironic_agent_deploy_logs_local_path: /var/log/ironic/deploy

# Set this to true to configure dnsmasq to respond to requests from the
# hosts in your dynamic inventory.
inventory_dhcp: False

# Set this to true to configure dnsmasq to resolv to ipv4_address from the
# hosts in your dynamic inventory.
inventory_dns: False

# Set this to true to configure dnsmasq to populate the NTP servers
# setting of dnsmasq.
# Several NTP servers can be specified, seperated by commas.
# dnsmasq_ntp_servers:

# Settings to enable the use of inspector
enable_inspector: true
inspector_debug: true
inspector_manage_firewall: false

# Set ironic_log_dir to use a non-default log directory for ironic.
#ironic_log_dir: /var/log/ironic

# Set inspector_log_dir to use a non-default log directory for inspector.
#inspector_log_dir:
inspector_ramdisk_logs_local_path: /var/log/ironic-inspector/ramdisk

inspector_store_ramdisk_logs: true
# Note: inspector_port_addition has three valid values: all, active, pxe
inspector_port_addition: "pxe"

# Note: inspector_keep_ports has three valid values: all, present, added
inspector_keep_ports: "present"

# String value containing extra kernel parameters for the inspector default
# PXE configuration.
inspector_extra_kernel_options: "ipa-inspection-collectors=default,logs"

# Set inspector_processing_hooks to specify a non-default comma-separated
# list of processing hooks for inspector.
#inspector_processing_hooks:

enable_inspector_discovery: false

inspector_default_node_driver: "{{ 'manual-management' if enable_credential_less_deploy|bool else 'ipmi' }}"

# Inspector defaults (deprecated in Victoria)
inspector:
  discovery:
    enabled: "{{ enable_inspector_discovery }}"
    default_node_driver: "{{ inspector_default_node_driver }}"

# If baremetal nodes should be turned off after inspection.
# The inspector default is to turn off the baremetal node
# power, this setting to false enables use of fast track mode.
power_off_after_inspection: "{{ not fast_track|bool }}"

# We may not have packaged iPXE files on some distros, or may want to
# download them on their own.
download_ipxe: false

# Settings related to installing bifrost in a virtual environment
bifrost_venv_dir: "{{ lookup('env', 'VENV') or '/opt/stack/bifrost' }}"
bifrost_venv_env:
  VIRTUAL_ENV: "{{ bifrost_venv_dir }}"
  PATH: "{{ bifrost_venv_dir }}/bin:{{ ansible_env.PATH }}" # include regular path via lookup env
  pydoc: "python -m pydoc"
ansible_python_interpreter: "{{ bifrost_venv_dir + '/bin/python3' }}"

# Authentication support
# By default, bifrost was developed around being a toolkit
# for noauth mode. Since we are introducing the concept of
# authentication, we need to record the default for
# conditional statements in the playbooks.
noauth_mode: false

# A work around for installing older releases, remove when no longer supporting
# Ussuri.
git_branch: master
supports_http_auth: >-
  {{ git_branch == "master"
     or git_branch[7:] not in ["queens", "rocky", "stein", "train", "ussuri"] }}

# Keystone Support
# Default parameter if keystone is enabled, or disabled.
enable_keystone: false

# Service URLs used for communication with them.
api_protocol: "{{ 'https' if enable_tls | bool else 'http' }}"
ironic_api_url: "{{ api_protocol }}://{{ internal_ip }}:6385"
ironic_inspector_api_url: "{{ api_protocol }}://{{ internal_ip }}:5050"
keystone_api_url: "{{ api_protocol }}://{{ internal_ip }}:5000/v3"

# Directory (on the controller) to keep the passwords
password_dir: "{{ lookup('env', 'HOME') }}/.config/bifrost"

# Various credentials
default_username: bifrost_user
default_password: "{{ lookup('password', password_dir + '/default_password') }}"

admin_username: admin
admin_password: "{{ lookup('password', password_dir + '/admin_password') }}"

# NOTE(dtantsur): various URLs in configuration files don't like special
# symbols in passwords.
service_password: "{{ lookup('password', password_dir + '/service_password chars=ascii_letters,digits') }}"

# TODO(dtantsur): deprecate in favor of service_password
ironic_db_password: "{{ service_password }}"

ironic:
  service_catalog:
    username: "ironic"
    password: "{{ service_password }}"
    auth_url: "{{ keystone_api_url }}"
    project_name: "service"
  keystone:
    default_username: "{{ default_username }}"
    default_password: "{{ default_password }}"
  database:
    name: "ironic"
    username: "ironic"
    password: "{{ ironic_db_password }}"
    host: "localhost"

ironic_inspector:
  service_catalog:
    username: "ironic_inspector"
    password: "{{ service_password }}"
    auth_url: "{{ keystone_api_url }}"
    project_name: "service"
  keystone:
    default_username: "{{ default_username }}"
    default_password: "{{ default_password }}"
  database:
    name: "inspector"
    username: "inspector"
    password: "{{ ironic_db_password }}"
    host: "localhost"

# NOTE(dtantsur): keep in sync with bifrost-keystone-install
keystone:
  debug: true
  bootstrap:
    enabled: true
    username: "{{ admin_username }}"
    password: "{{ admin_password }}"
    project_name: admin
    admin_url: "{{ keystone_api_url }}"
    public_url: "{{ keystone_api_url }}"
    internal_url: "{{ api_protocol }}://127.0.0.1:5000/v3/"
    region_name: "RegionOne"
  message_queue:
    username: keystone
    password: "{{ service_password }}"
    host: localhost
    port: 5672
  database:
    name: keystone
    username: keystone
    password: "{{ service_password }}"
    host: localhost

# Timeout for gathering facts.
fact_gather_timeout: "{{ lookup('config', 'DEFAULT_GATHER_TIMEOUT', on_missing='skip') | default(omit, true) }}"

# Enable TLS support.
enable_tls: false
vmedia_enable_tls: "{{ enable_tls }}"
tls_root: /etc/bifrost
tls_certificate_path: "{{ tls_root }}/bifrost.crt"
ironic_private_key_path: /etc/ironic/ironic.pem
ironic_inspector_private_key_path: /etc/ironic-inspector/inspector.pem
httpboot_private_key_path: /etc/nginx/httpboot.pem

# Enable Ironic Prometheus Exporter
enable_prometheus_exporter: false
prometheus_exporter_host: "{{ internal_ip }}"
prometheus_exporter_port: 9608
# directory to save the node metrics
prometheus_exporter_data_dir: /var/lib/ironic-prometheus-exporter/data
# interval to collect sensor data
sensor_data_interval: 90
# sensor data should be collected from undeployed nodes
sensor_data_undeployed_nodes: false

# Internal variables
pxe_kernel_params: >-
  nofb nomodeset systemd.journald.forward_to_console=yes
  {% if testing | bool %}console=ttyS0{% endif %}
  ipa-insecure=1
  {% if ipa_add_ssh_key | bool and ssh_public_key is defined %}
  sshkey="{{ ssh_public_key }}"
  {% endif %}
  {{ extra_kernel_options | default('') }}
redfish_kernel_params: "{{ pxe_kernel_params }}"
ilo_kernel_params: "{{ pxe_kernel_params }}"