options:
  share-backend-name:
    type: string
    default: netapp-ontap
    description: |
      The name given to the backend. This is used to generate the backend
      configuration section. If two different configurations of the same
      backend type are needed, then this config option can be used to separate
      them in the backend configuration.
  driver-handles-share-servers:
    type: boolean
    description: |
      Whether the Manila driver should manage the Vservers within the
      NetApp ONTAP cluster.
    default: False
  root-volume-aggregate-name:
    type: string
    description: |
      Name of aggregate to create Vserver root volumes on. This option only
      applies when the option 'driver-handles-share-servers' is set to True.
  enabled-share-protocols:
    type: string
    description: |
      Comma-separated list of NFS protocol versions that will be enabled on
      the Vservers from the NetApp ONTAP cluster.
      The supported versions are:
        * nfs3
        * nfs4.0
        * nfs4.1
      This option only applies when the option 'driver-handles-share-servers'
      is set to True.
    default: nfs3,nfs4.0,nfs4.1
  vserver-name:
    type: string
    description: |
      The name of the Vserver already configured within the NetApp ONTAP
      cluster. This option is used only when 'driver-handles-share-servers' is
      set to False.
  management-address:
    type: string
    description: |
      The management address (IP or hostname) for the NetApp ONTAP cluster.
  admin-name:
    type: string
    default: admin
    description: |
      Administrative user account name used to access the storage system.
  admin-password:
    type: string
    description: |
      Password for the administrative user account specified in the
      'admin-name' option.
  transport-type:
    type: string
    description: |
      Transport protocol for communicating with the storage system or proxy
      server. Valid options include http and https.
    default: http
  netapp-server-port:
    type: string
    description: |
      The TCP port to use for communication with the storage system or proxy
      server. If not specified, ONTAP drivers will use 80 for HTTP and 443 for HTTPS.
    default: ''
  backend-availability-zone:
    type: string
    description: |
      Zone where backend shared server would be created.
    default: 'nova'
  root-volume-name:
    type: string
    description: |
      This option specifies name of the root volume that will be created when
      a new SVM is created to correspond to a Manila share server.
    default: 'root'
  aggregate-name-search-pattern:
    type: string
    description: |
      This option specifies a regular expression that is applied against all
      available aggregates related to the SVM specified in the netapp_vserver
      option. This filtered list will be reported to the Manila scheduler as
      valid pools for provisioning new shares.
    default: '(.*)'
  standalone-network:
    type: boolean
    description: |
      Standalone Network Plugin Use this plugin in stand-alone deployments of
      OpenStack Manila
    default: False
  standalone-network-network-type:
    type: string
    description: |
      Specify the network type as one of flat or vlan. If unspecified, the
      driver assumes the network is non-segmented. If using vlan, specify
      the standalone_network_plugin_segmentation_id option as well.
    default: flat
  standalone-network-segmentation-id:
    type: string
    description: |
      Specify the segmentation ID that should be assigned to data LIFs through
      which shares can be exported. This option is not necessary if the
      standalone_network_plugin_network_type is set to flat
    default: ''
  standalone-network-mtu:
    type: string
    description: |
      Maximum Transmission unit (MTU) value of the network.
    default: '1500'
  standalone-network-allowed-ip-ranges:
    type: string
    description: |
      Specify the range of IP addresses that can be used on data LIFs through
      which shares can be exported. An example of a valid range would be
      10.0.0.10-10.0.0.254. If this value is not specified, the entire range
      of IP addresses within the network computed by applying the value of
      standalone_network_plugin_mask to the value of
      standalone_network_plugin_gateway. In this case, the broadcast,
      network, and gateway addresses are automatically excluded.
    default: ''
  standalone-network-mask:
    type: string
    description: |
      Specify the subnet mask that should be configured on the data LIF through
      which the share is exported. You can specify the CIDR suffix (without the
      slash, e.g. 24) or the full netmask (e.g. 255.255.255.0).
    default: "24"
  standalone-network-gateway:
    type: string
    description: |
      Specify the gateway IP address that should be configured on the data
      LIF through which the share is exported. A Vserver static route is
      configured using this gateway.
    default: "172.16.31.1"
  goodness-function:
    type: string
    description: |
      Specify an optional goodness function (as a string) that will be
      run against the backend to determine its goodness score for scheduling.
      Please refer to the Manila documentation for the function structure,
      valid operands and operators.
    default: ""