openstack/cinder-specs
Code Issues Proposed changes

Remove unit testing

Browse Source 
Spec repos do not have code to unit test. The gate job definition for
the py27 and py35 jobs skip if there doc only changes, which is all we
will ever have in the specs repo. Therefore the one "test" we had will
never be run.

We were using this unit test as a check for formatting issues with the
rst files. This was done before doc8 was available. Now that we can use
doc8, we should just switch to running that as part of the pep8 jobs.

Also fixes all the errors caught by doc8 that were not caught by our
unit test check.

Change-Id: Ida20764edde3a07c89703d82b41958c96548b239
This commit is contained in:
Sean McGinnis 2017-11-16 16:38:38 -06:00 committed by Sean McGinnis
parent 2f5701b912
commit 5016627f04
55 changed files with 658 additions and 514 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
requirements.txt
View File

@ -5,3 +5,4 @@ testrepository>=0.0.18
testtools>=0.9.34
flake8
yasfb>=0.5.1
doc8>=0.6.0 # Apache-2.0

2
specs/api/v2/date_and_time_format.rst
View File

@ -17,7 +17,7 @@ May 19th, 2011 at 8:07:08 AM, GMT-5 has the following format:
2011-05-19T08:07:08-05:00
|
|
The following table describes the date time format codes:

75
specs/api/v2/faults.rst
View File

@ -9,29 +9,46 @@ body returns additional information about the fault.
The following table lists possible fault types with their associated
error codes and descriptions.
Fault type Associated error code Description
======================= ===================== ===============================
Fault type Associated error code Description
======================= ===================== ===============================
``badRequest`` 400 The user request contains one
or more errors.
``unauthorized`` 401 The supplied token is not
authorized to access the
resources, either it's expired
or invalid.
``forbidden`` 403 Access to the requested
resource was denied.
``itemNotFound`` 404 The back-end services did not
find anything matching the
Request-URI.
``badMethod`` 405 The request method is not
allowed for this resource.
``overLimit`` 413 Either the number of entities
in the request is larger than
allowed limits, or the user has
exceeded allowable request rate
limits. See the ``details``
element for more specifics.
Contact your cloud provider if
you think you need higher
request rate limits.
``badMediaType`` 415 The requested content type is
not supported by this service.
``unprocessableEntity`` 422 The requested resource could
not be processed on at the
moment.
``instanceFault`` 500 This is a generic server error
and the message contains the
reason for the error. This
error could wrap several error
messages and is a catch all.
``notImplemented`` 501 The requested method or
resource is not implemented.
``serviceUnavailable`` 503 Block Storage is not available.
======================= ===================== ===============================
``badRequest`` 400 The user request contains one or more errors.
``unauthorized`` 401 The supplied token is not authorized to access the resources, either it's expired or invalid.
``forbidden`` 403 Access to the requested resource was denied.
``itemNotFound`` 404 The back-end services did not find anything matching the Request-URI.
``badMethod`` 405 The request method is not allowed for this resource.
``overLimit`` 413 Either the number of entities in the request is larger than allowed limits, or the user has exceeded allowable request rate limits. See the ``details`` element for more specifics. Contact your cloud provider if you think you need higher request rate limits.
``badMediaType`` 415 The requested content type is not supported by this service.
``unprocessableEntity`` 422 The requested resource could not be processed on at the moment.
``instanceFault`` 500 This is a generic server error and the message contains the reason for the error. This error could wrap several error messages and is a catch all.
``notImplemented`` 501 The requested method or resource is not implemented.
``serviceUnavailable`` 503 Block Storage is not available.
The following two ``instanceFault`` examples show errors when the server
has erred or cannot perform the requested operation:
@ -54,7 +71,7 @@ has erred or cannot perform the requested operation:
performing the requested operation. </message>
</instanceFault>
|
|
**Example 2.5. Example fault response: JSON**
@ -74,7 +91,7 @@ has erred or cannot perform the requested operation:
}
}
|
|
The error code (``code``) is returned in the body of the response for
convenience. The ``message`` element returns a human-readable message
@ -83,7 +100,7 @@ is optional and may contain information that is useful for tracking down
an error, such as a stack trace. The ``details`` element may or may not
be appropriate for display to an end user, depending on the role and
experience of the end user.
`
The fault's root element (for example, ``instanceFault``) may change
depending on the type of error.
@ -108,7 +125,7 @@ size is invalid:
cannot be accepted. </message>
</badRequest>
|
|
**Example 2.7. Example badRequest fault on volume size errors: JSON**
@ -128,7 +145,7 @@ size is invalid:
}
}
|
|
The next two examples show ``itemNotFound`` errors:
@ -149,7 +166,7 @@ The next two examples show ``itemNotFound`` errors:
<message> The resource could not be found. </message>
</itemNotFound>
|
|
**Example 2.9. Example itemNotFound fault: JSON**
@ -169,5 +186,5 @@ The next two examples show ``itemNotFound`` errors:
}
}
|
|

4
specs/api/v2/limits.rst
View File

@ -72,7 +72,7 @@ Default
100/minute
|
|
Rate limits are applied in order relative to the verb, going from least
to most specific. For example, although the threshold for **POST** to
@ -102,5 +102,5 @@ Maximum amount of block storage
1 TB
|
|

4
specs/api/v2/request_and_response_types.rst
View File

@ -39,7 +39,7 @@ In the request example below, notice that *``Content-Type``* is set to
X-Auth-Token: eaaafd18-0fed-4b3a-81b4-663c99ec1cbb
Accept: application/xml
|
|
An XML response format is returned:
@ -63,5 +63,5 @@ An XML response format is returned:
</volume_type>
</volume_types>
|
|

4
specs/juno/support-GPFS-nas-ibmnas-driver.rst
View File

@ -4,9 +4,9 @@
http://creativecommons.org/licenses/by/3.0/legalcode
==========================================
=====================================================================
Extending IBMNAS driver to support NAS based GPFS storage deployments
==========================================
=====================================================================
https://blueprints.launchpad.net/cinder/+spec/add-gpfs-nas-to-ibmnas

118
specs/juno/volume-replication.rst
View File

@ -137,9 +137,9 @@ Create volume with replication enabled:
When a replicated volume is created it is expected that the volume dictionary
will be populated as follows:
** volume['replication_status'] = 'copying'
** volume['replication_extended_status'] = <driver specific value>
** volume['driver_data'] = <driver specific value>
- volume['replication_status'] = 'copying'
- volume['replication_extended_status'] = <driver specific value>
- volume['driver_data'] = <driver specific value>
The replica volume is hidden from the end user as the end user will
never need to directly interact with the replica volume. Any interaction
@ -208,21 +208,28 @@ Re-type volume:
The steps to implement this would look as follows:
* Do a diff['extra_specs'] and see if 'replication' is included.
* If replication was enabled for the original volume_type but is not
not enabled for the new volume_type, then replication should be disabled.
* The replica should be deleted.
* The volume dictionary should be updated as follows:
** volume['replication_status'] = 'disabled'
** volume['replication_extended_status'] = None
** volume['driver_data'] = None
- volume['replication_status'] = 'disabled'
- volume['replication_extended_status'] = None
- volume['driver_data'] = None
* If replication was not enabled for the original volume_type but is
enabled for the new volume_type, then replication should be enabled.
* A volume replica should be created and the replication should
be set up between the volume and the newly created replica.
* The volume dictionary should be updated as follows:
** volume['replication_status'] = 'copying'
** volume['replication_extended_status'] = <driver specific value>
** volume['driver_data'] = <driver specific value>
- volume['replication_status'] = 'copying'
- volume['replication_extended_status'] = <driver specific value>
- volume['driver_data'] = <driver specific value>
Get Replication Status:
@ -241,12 +248,14 @@ Get Replication Status:
happen:
* volume['replication_status'] = <error | copying | active | active-stopped |
inactive>
** 'error' if an error occurred with replication.
** 'copying' replication copying data to secondary (inconsistent)
** 'active' replication copying data to secondary (consistent)
** 'active-stopped' replication data copy on hold (consistent)
** 'inactive' if replication data copy is stopped (inconsistent)
inactive>
- 'error' if an error occurred with replication.
- 'copying' replication copying data to secondary (inconsistent)
- 'active' replication copying data to secondary (consistent)
- 'active-stopped' replication data copy on hold (consistent)
- 'inactive' if replication data copy is stopped (inconsistent)
* volume['replication_extended_status'] = <driver specific value>
* volume['driver_data'] = <driver specific value>
@ -266,9 +275,12 @@ Promote replica:
As with the functions above, the volume driver is expected to update the
volume dictionary as follows:
* volume['replication_status'] = <error | inactive>
** 'error' if an error occurred with replication.
** 'inactive' if replication data copy on hold (inconsistent)
- 'error' if an error occurred with replication.
- 'inactive' if replication data copy on hold (inconsistent)
* volume['replication_extended_status'] = <driver specific value>
* volume['driver_data'] = <driver specific value>
@ -283,13 +295,16 @@ Re-enable replication:
The backend driver is expected to update the following volume dictionary
entries:
* volume['replication_status'] = <error | copying | active | active-stopped |
inactive>
** 'error' if an error occurred with replication.
** 'copying' replication copying data to secondary (inconsistent)
** 'active' replication copying data to secondary (consistent)
** 'active-stopped' replication data copy on hold (consistent)
** 'inactive' if replication data copy is stopped (inconsistent)
inactive>
- 'error' if an error occurred with replication.
- 'copying' replication copying data to secondary (inconsistent)
- 'active' replication copying data to secondary (consistent)
- 'active-stopped' replication data copy on hold (consistent)
- 'inactive' if replication data copy is stopped (inconsistent)
* volume['replication_extended_status'] = <driver specific value>
* volume['driver_data'] = <driver specific value>
@ -331,23 +346,32 @@ admin.
Data model impact
-----------------
* The volumes table will be updated:
** Add replication_status column (string) for indicating the status of
replication for a give volume. Possible values are:
*** 'copying' - Data is being copied between volumes, the secondary is
inconsistent.
*** 'disabled' - Volume replication is disabled.
*** 'error' - Replication is in error state.
*** 'active' - Data is being copied to the secondary and the secondary is
consistent.
*** 'active-stopped' - Data is not being copied to the secondary (on hold),
the secondary volume is consistent.
*** 'inactive' - Data is not being copied to the secondary, the secondary
copy is inconsistent.
** Add replication_extended_status column to contain details with regards
to replication status of the primary and secondary volumes.
** Add replication_driver_data column to contain additional details that
may be needed by a vendor's driver to implement replication on a backend.
The volumes table will be updated:
* Add replication_status column (string) for indicating the status of
replication for a give volume. Possible values are:
- 'copying' - Data is being copied between volumes, the secondary is
inconsistent.
- 'disabled' - Volume replication is disabled.
- 'error' - Replication is in error state.
- 'active' - Data is being copied to the secondary and the secondary is
consistent.
- 'active-stopped' - Data is not being copied to the secondary (on hold),
the secondary volume is consistent.
- 'inactive' - Data is not being copied to the secondary, the secondary
copy is inconsistent.
- Add replication_extended_status column to contain details with regards
to replication status of the primary and secondary volumes.
- Add replication_driver_data column to contain additional details that
may be needed by a vendor's driver to implement replication on a backend.
State diagram for replication (status)
@ -386,12 +410,14 @@ REST API impact
Create volume API will have "source-replica" added:
{
"volume":
{
"source-replica": "Volume uuid of primary to clone",
}
}
.. code-block:: python
{
"volume":
{
"source-replica": "Volume uuid of primary to clone",
}
}
* Promote volume to be the primary volume

12
specs/kilo/abc-volume-drivers.rst
View File

@ -32,7 +32,9 @@ Proposed change
===============
Build a base VolumeDriver class and subclasses that describe feature sets,
like::
like:
.. code-block:: console
+-------------------------+
+----------------+ BaseVolumeDriver +---------------+
@ -40,10 +42,10 @@ like::
| +-----------^-------------+ |
| | |
| | |
+--------+-------------+ +-----------+-------------+ +------------+---------+
| VolumeDriverBackup | | VolumeDriverSnapshot | | VolumeDriverImport |
| {abstract} | | {abstract} | | {abstract} |
+----------------------+ +-------------------------+ +----------------------+
+-------+-------------+ +-----------+-------------+ +------------+---------+
| VolumeDriverBackup | | VolumeDriverSnapshot | | VolumeDriverImport |
| {abstract} | | {abstract} | | {abstract} |
+---------------------+ +-------------------------+ +----------------------+
If a driver implements the backup functionality and supports volume import it

2
specs/kilo/chiscsi-iscsi-helper.rst
View File

@ -88,7 +88,7 @@ Other deployer impact
---------------------
* No new config options are required besides an extra allowed value for
'iscsi_helper' that would need to be explicitly set to 'chiscsi'.
'iscsi_helper' that would need to be explicitly set to 'chiscsi'.
* chiscsi target needs to be installed before it can be used.
Developer impact

54
specs/kilo/consistency-groups-kilo-update.rst
View File

@ -17,13 +17,17 @@ Problem description
===================
* Create CG from CG snapshot
Currently a user can create a Consistency Group and create a snapshot of a
Consistency Group. To restore from a Cgsnapshot, however, the following
steps need to be performed:
1) Create a new Consistency Group.
2) Do the following for every volume in the Consistency group:
a) Call "create volume from snapshot" for snapshot associated with every
volume in the original Consistency Group.
There's no single API that allows a user to create a Consistency Group from
a Cgsnapshot.
@ -45,22 +49,30 @@ Proposed change
===============
* Create CG from CG snapshot
* Add an API that allows a user to create a Consistency Group from a
Cgsnapshot.
* Add a Volume Driver API accordingly.
* Modify Consistency Group
* Add an API that adds existing volumes to CG and removing volumes from CG
after it is created.
* Add a Volume Driver API accordingly.
* DB Schema Changes
The following changes are proposed:
* A new cg_volumetypes table will be created.
* This new table will contain 3 columns:
* uuid of a cg_volumetype entry
* uuid of a consistencygroup
* uuid of a volume type
* Upgrade and downgrade functions will be provided for db migrations.
Alternatives
@ -75,9 +87,10 @@ Data model impact
The following changes are proposed:
* A new cg_volumetypes table will be created.
* This new table will contain 3 columns:
* uuid of a cg_volumetype entry
* uuid of a consistencygroup
* uuid of a volume type
- uuid of a cg_volumetype entry
- uuid of a consistencygroup
- uuid of a volume type
REST API impact
---------------
@ -133,11 +146,16 @@ New Consistency Group APIs changes
* Cinder Volume Driver API
The following new volume driver APIs will be added:
* def create_consistencygroup_from_cgsnapshot(self, context,
consistencygroup, volumes, cgsnapshot, snapshots)
* def modify_consistencygroup(self, context, consistencygroup,
old_volumes, new_volumes)
.. code-block:: python
def create_consistencygroup_from_cgsnapshot(self, context,
consistencygroup, volumes, cgsnapshot, snapshots)
def modify_consistencygroup(self, context, consistencygroup,
old_volumes, new_volumes)
Security impact
---------------
@ -153,14 +171,20 @@ Other end user impact
python-cinderclient needs to be changed to support the new APIs.
* Create CG from CG snapshot
cinder consisgroup-create --name <name> --description <description>
--cgsnapshot <cgsnapshot uuid or name>
.. code-block:: bash
cinder consisgroup-create --name <name> --description <description>
--cgsnapshot <cgsnapshot uuid or name>
* Modify CG
cinder consisgroup-modify <cg uuid or name> --name <new name>
--description <new description> --addvolumes
<volume uuid> [<volume uuid> ...] --removevolumes
<volume uuid> [<volume uuid> ...]
.. code-block:: bash
cinder consisgroup-modify <cg uuid or name> --name <new name>
--description <new description> --addvolumes
<volume uuid> [<volume uuid> ...] --removevolumes
<volume uuid> [<volume uuid> ...]
Performance Impact
------------------
@ -192,11 +216,15 @@ Work Items
----------
1. API changes:
* Create CG from CG snapshot API
* Modify CG API
2. Volume Driver API changes:
* Create CG from CG snapshot
* Modify CG
3. DB schema changes
Dependencies

2
specs/kilo/iscsi-alternative-portal.rst
View File

@ -83,6 +83,8 @@ parameters 'target_alternative_portals' and 'target_alternative_iqns', which
contain a list of portal IP address:port pairs, a list of alternative iqn's and
lun's corresponding to each portal address. For example:
.. code-block:: python
{"connection_info": {"driver_volume_type": "iscsi", ...
"data": {"target_portal": "10.0.1.2:3260",
"target_alternative_portals": [

2
specs/kilo/iscsi-multipath-enhancement.rst
View File

@ -88,6 +88,8 @@ a list of secondary iqn's and lun's corresponding to each portal address.
For example:
.. code-block:: python
{"connection_info": {"driver_volume_type": "iscsi", ...
"data": {"target_portals": ["10.0.1.2:3260",
"10.0.2.2:3260"],

3
specs/kilo/limit-volume-copy-bps-per-backend.rst
View File

@ -139,7 +139,8 @@ None
Testing
=======
* With volume_copy_bps_limit = 100MB/s for a fake backend driver,
* With volume_copy_bps_limit = 100MB/s for a fake backend driver:
* start a volume copy, then the bps limit is set to 100MB/s
* start a second volume copy, then the limit is updated to 50MB/s for both
* finish one of the copies, then the limit is resumed to 100MB/s

9
specs/liberty/adopt-guru-meditation-report.rst
View File

@ -157,8 +157,7 @@ support for the reporting feature.
References
==========
* oslo-incubator module: http://git.openstack.org/cgit/openstack/oslo-incubator/tree/openstack/commo
n/report
* blog about nova guru reports: https://www.berrange.com/posts/2015/02/19/nova-and-its-use-of-olso-i
ncubator-guru-meditation-reports/
* oslo.reports repo: https://github.com/directxman12/oslo.reports
* oslo-incubator module: http://git.openstack.org/cgit/openstack/oslo-incubator/tree/openstack/common/report
* blog about nova guru reports: https://www.berrange.com/posts/2015/02/19/nova-and-its-use-of-olso-incubator-guru-meditation-reports/
* oslo.reports repo: https://github.com/directxman12/oslo.reports

5
specs/liberty/cinder-internal-tenant.rst
View File

@ -178,5 +178,8 @@ References
==========
* http://eavesdrop.openstack.org/meetings/cinder/2015
/cinder.2015-05-27-16.00.log.html
* https://blueprints.launchpad.net/cinder/+spec/image-volume-cache
* https://blueprints.launchpad.net/cinder/+spec/image-volume-cache

21
specs/liberty/cinder-nested-quota-driver.rst
View File

@ -124,20 +124,31 @@ Xing and Eric respectively.
+----------------+----------------+----------+--------------+
Consider following use-cases :-
a. Suppose, Mike(admin of root project or cloud admin) increases the
``hard_limit`` of volumes in CMS to 400
b. Suppose, Mike increases the ``hard_limit`` of volumes in CMS to 500
c. Suppose, Mike delete the quota of CMS
d. Suppose, Mike reduces the ``hard_limit`` of volumes in CMS to 350
e. Suppose, Mike reduces the ``hard_limit`` of volumes in CMS to 200
f. Suppose, Jay(Manager of CMS)increases the ``hard_limit`` of
volumes in CMS to 400
g. Suppose, Jay tries to view the quota of ATLAS
h. Suppose, Duncan tries to reduce the ``hard_limit`` of volumes in CMS to
400.
i. Suppose, Mike tries to increase the ``hard_limit`` of volumes in
ProductionIT to 2000.
j. Suppose, Mike deletes the quota of Visualisation.
k. Suppose, Mike deletes the project Visualisation.
9. Suppose the company doesn't want a nested structure and want to
@ -528,11 +539,9 @@ added since Kilo release.
References
==========
* `Hierarchical Projects Wiki
<https://wiki.openstack.org/wiki/HierarchicalMultitenancy>`_
* `Hierarchical Projects Wiki <https://wiki.openstack.org/wiki/HierarchicalMultitenancy>`_
* `Hierarchical Projects
<http://specs.openstack.org/openstack/keystone-specs/specs/juno/hierarchical_multitenancy.html>`_
* `Hierarchical Projects <http://specs.openstack.org/openstack/keystone-specs/specs/juno/hierarchical_multitenancy.html>`_
* `Hierarchical Projects Improvements <https://blueprints.launchpad.net/keystone/+spec/hierarchical-multitenancy-improvements>`_
* `Hierarchical Projects Improvements
<https://blueprints.launchpad.net/keystone/+spec/hierarchical-multitenancy-improvements>`_

14
specs/liberty/clone-cg.rst
View File

@ -43,6 +43,7 @@ Proposed change
* The existing Create CG from Source API takes an existing CG snapshot
as the source.
* This blueprint proposes to modify the existing API to accept an existing
CG as the source.
@ -51,9 +52,12 @@ Alternatives
Without the proposed changes, we can create a CG from an existing CG
with these steps:
* Create an empty CG.
* Create a cloned volume from an existing volume in an existing CG
and add to the new CG.
* Repeat the above step for all volumes in the CG.
Data model impact
@ -68,9 +72,12 @@ REST API impact
Consistency Group API change
* Create Consistency Group from Source
* V2/<tenant id>/consistencygroups/create_from_src
* V2/<tenant id>/consistencygroups/create_from_src
* Method: POST
* JSON schema definition for V2::
* JSON schema definition for V2:
.. code-block:: python
{
"consistencygroup-from-src":
@ -87,9 +94,12 @@ Consistency Group API change
of the new CG.
* Cinder Volume Driver API
Two new optional parameters will be added to the existing volume driver API:
* def create_consistencygroup_from_src(self, context, group, volumes,
cgsnapshot=None, snapshots=None, src_group=None, src_volumes=None)
* Note only "src_group" and "src_volumes" are new parameters.
Security impact

4
specs/liberty/db-archiving.rst
View File

@ -160,4 +160,6 @@ References
* Nova's spec for db archiving: https://review.openstack.org/#/c/18493/
* Discussion in openstack-dev mailing list:
http://lists.openstack.org/pipermail/openstack-dev/2014-March/029952.html
http://lists.openstack.org/pipermail/openstack-dev/2014-March/029952.html

82
specs/liberty/enhance-list-operations-pagination-keys.rst
View File

@ -112,24 +112,29 @@ The following existing v2 GET APIs will support the new sorting parameters:
{items} will be replaced by the appropriate entities as follows:
* For snapshots:
* /v2/{tenant_id}/snapshots
* /v2/{tenant_id}/snapshots/detail
- /v2/{tenant_id}/snapshots
- /v2/{tenant_id}/snapshots/detail
* For volume transfers:
* /v2/{tenant_id}/os-volume-transfer
* /v2/{tenant_id}/os-volume-transfer/detail
- /v2/{tenant_id}/os-volume-transfer
- /v2/{tenant_id}/os-volume-transfer/detail
* For consistency group:
* /v2/{tenant_id}/consistencygroups
* /v2/{tenant_id}/consistencygroups/detail
- /v2/{tenant_id}/consistencygroups
- /v2/{tenant_id}/consistencygroups/detail
* For consistency group snapshots:
* /v2/{tenant_id}/cgsnapshots
* /v2/{tenant_id}/cgsnapshots/detail
- /v2/{tenant_id}/cgsnapshots
- /v2/{tenant_id}/cgsnapshots/detail
* For backups:
* /v2/{tenant_id}/backups
* /v2/{tenant_id}/backups/detail
- /v2/{tenant_id}/backups
- /v2/{tenant_id}/backups/detail
The existing API needs to support the following new Request Parameters for
the above cinder concepts:
@ -165,34 +170,49 @@ The next link will be put in the response returned from cinder if it is
necessary.
* For snapshots, it replies:
{
"snapshots": [<List of snapshots>],
"snapshots_links": [{'href': '<next_link>', 'rel': 'next'}]
}
.. code-block:: python
{
"snapshots": [<List of snapshots>],
"snapshots_links": [{'href': '<next_link>', 'rel': 'next'}]
}
* For volume transfers, it replies:
{
"transfers": [<List of transfers>],
"transfers_links": [{'href': '<next_link>', 'rel': 'next'}]
}
.. code-block:: python
{
"transfers": [<List of transfers>],
"transfers_links": [{'href': '<next_link>', 'rel': 'next'}]
}
* For consistency group, it replies:
{
"consistencygroups": [<List of consistencygroups>],
"consistencygroups_links": [{'href': '<next_link>', 'rel': 'next'}]
}
.. code-block:: python
{
"consistencygroups": [<List of consistencygroups>],
"consistencygroups_links": [{'href': '<next_link>', 'rel': 'next'}]
}
* For consistency group snapshots, it replies:
{
"cgsnapshots": [<List of cgsnapshots>],
"cgsnapshots_links": [{'href': '<next_link>', 'rel': 'next'}]
}
* For backups, it replies::
{
"backups": [<List of backups>],
"backups_links": [{'href': '<next_link>', 'rel': 'next'}]
}
.. code-block:: python
{
"cgsnapshots": [<List of cgsnapshots>],
"cgsnapshots_links": [{'href': '<next_link>', 'rel': 'next'}]
}
* For backups, it replies:
.. code-block:: python
{
"backups": [<List of backups>],
"backups_links": [{'href': '<next_link>', 'rel': 'next'}]
}
Security impact

1
specs/liberty/get-vol-type-extra-specs.rst
View File

@ -206,6 +206,7 @@ The qos capability describes some corner cases for us:
The vendor:persona key is another good example of a ``vendor unique``
capability:
This is very much like QoS, and again, note that we're just providing what
the valid values are.

2
specs/liberty/image-volume-cache.rst
View File

@ -50,7 +50,7 @@ level steps to take:
this volume will henceforth be known as the 'image-volume'. This volume
would be owned by a special tenant that is controlled by Cinder.
* Update the cache to know about this new image-volume and its image
contents.
contents.
* Clone the image-volume.
This new behavior would be enabled via a new volume driver config option

34
specs/liberty/implement-force-detach-for-safe-cleanup.rst
View File

@ -22,8 +22,8 @@ connected/exported to the compute host and nova instance. If the volume state
is reset to 'available' and 'detached', it can be attached to a second
instance (note that this is not multi-attach) and lead to data corruption.
This spec proposes to plumb cinder APIs that allow an admin to set the state to
'available' and 'detached' in a safe way, meaning that the backend storage and
cinder db are synchronized.
'available' and 'detached' in a safe way, meaning that the backend storage and
cinder db are synchronized.
An attempt was made to merge a Nova spec to add a '--force' option, but it has
stalled and will likely be replaced with some Nova code changes. See:
https://review.openstack.org/#/c/84048/44
@ -78,9 +78,9 @@ Current Fix: Using python-cinderclient 'reset-state' to set the Cinder DB to
Proposed Fix: An attempt to detach from Nova will fail, since Nova does not
know about this volume.
Implementing Cinder force_detach and exposing to the cinderclient will allow
cinder to call the backend to cleanup (default implementation is
cinder to call the backend to cleanup (default implementation is
terminate_connection and detach, but can be overridden) and then set Cinder DB
state to 'available' and 'detached'.
state to 'available' and 'detached'.
UseCase2: Cinder DB 'attaching', storage back end 'attached', Nova DB
shows block device for this volume.
@ -90,11 +90,11 @@ Current Fix: Using python-cinderclient 'reset-state' to set the Cinder DB to
attached. Nova will not allow this volume to be re-attached.
Proposed Fix: An attempt to detach from Nova will cleanup on the Nova side
(after proposed Nova changes) but fail in Cinder since the state is
'attaching'.
'attaching'.
Implementing Cinder force_detach and exposing to the cinderclient will allow
cinder to call the backend to cleanup (default implementation is
cinder to call the backend to cleanup (default implementation is
terminate_connection and detach, but can be overridden) and then set Cinder DB
state to 'available' and 'detached'.
state to 'available' and 'detached'.
UseCase3: Cinder DB 'detaching', storage back end 'available', Nova DB
does not show block device for this volume.
@ -106,9 +106,9 @@ Current Fix: Using python-cinderclient 'reset-state' to set the Cinder DB to
Proposed Fix: An attempt to detach from Nova will fail, since Nova does not
know about this volume.
Implementing Cinder force_detach and exposing to the cinderclient will allow
cinder to call the backend to cleanup (default implementation is
cinder to call the backend to cleanup (default implementation is
terminate_connection and detach, but can be overridden) and then set Cinder DB
state to 'available' and 'detached'.
state to 'available' and 'detached'.
UseCase4: Cinder DB 'detaching', storage back end 'attached', Nova DB
has a block device for this volume.
@ -120,11 +120,11 @@ Current Fix: Using python-cinderclient 'reset-state' to set the Cinder DB to
attached. Nova will not allow this volume to be re-attached.
Proposed Fix: An attempt to detach from Nova will cleanup on the Nova side
(after proposed Nova changes) but fail in Cinder since the state is
'attaching'.
'attaching'.
Implementing Cinder force_detach and exposing to the cinderclient will allow
cinder to call the backend to cleanup (default implementation is
cinder to call the backend to cleanup (default implementation is
terminate_connection and detach, but can be overridden) and then set Cinder DB
state to 'available' and 'detached'.
state to 'available' and 'detached'.
UseCase5: During an attach, initialize_connection() times out. Cinder DB is
'available', volume is attached, Nova DB does not show the block device.
@ -150,12 +150,19 @@ accomplished via manual intervention (i.e. 'cinder force-detach....'
(Links to proposed Nova changes will be provided ASAP)
Cinder force-detach API currently calls:
.. code-block:: python
volume_api.terminate_connection(...)
self.volume_api.detach(...)
This will be modified to call into the VolumeManager with a new
force_detach(...)
api/contrib/volume_actions.py: force_detach(...)
.. code-block:: python
try:
volume_rpcapi.force_detach(...)
except: #catch and add debug message
@ -164,6 +171,9 @@ api/contrib/volume_actions.py: force_detach(...)
self._reset_status(..) #fix DB if backend cleanup is successful
volume/manager.py: force_detach(...)
.. code-block:: python
self.driver.force_detach(..)
Individual drivers will implement force_detach as needed by the driver, most

32
specs/liberty/non-disruptive-backup.rst
View File

@ -98,7 +98,9 @@ Alternatives
------------
There are a couple of alternatives:
* Detach the volume and back it up.
* Take a snapshot of the attached volume, create a volume from the
snapshot and then back it up.
@ -146,7 +148,9 @@ By default it is False. The force flag is not needed for
* Create backup
* V2/<tenant id>/backups
* Method: POST
* JSON schema definition for V2::
* JSON schema definition for V2:
.. code-block:: python
{
"backup":
@ -165,18 +169,24 @@ The following driver APIs will be added to support attach snapshot and
detach snapshot.
attach snapshot:
* def _attach_snapshot(self, context, snapshot, properties,
remote=False)
* def create_export_snapshot(self, conext, snapshot)
* def initialize_connection_snapshot(self, snapshot, properties,
** kwargs)
.. code-block:: python
def _attach_snapshot(self, context, snapshot, properties,
remote=False)
def create_export_snapshot(self, conext, snapshot)
def initialize_connection_snapshot(self, snapshot, properties,
** kwargs)
detach snapshot:
* def _detach_snapshot(self, context, attach_info, snapshot,
properties, force=False, remote=False)
* def terminate_connection_snapshot(self, snapshot, properties,
** kwargs)
* def remove_export_snapshot(self, context, snapshot)
.. code-block:: python
def _detach_snapshot(self, context, attach_info, snapshot,
properties, force=False, remote=False)
def terminate_connection_snapshot(self, snapshot, properties,
** kwargs)
def remove_export_snapshot(self, context, snapshot)
Alternatively we can use an is_snapshot flag for volume and snapshot
to share common code without adding new functions, but it will make

15
specs/liberty/optimze-rbd-copy-volume-to-image.rst
View File

@ -80,7 +80,7 @@ Using a volume created based on "cirros-0.3.0-x86_64-disk" to show
the time-consuming between solution A and solution B.
* [Common]Create a volume based on image "cirros-0.3.0-x86_64-disk".
::
.. code-block:: bash
root@devaio:/home# cinder list
+--------------------------------------+-----------+------+------+
@ -88,11 +88,12 @@ the time-consuming between solution A and solution B.
+--------------------------------------+-----------+------+------+
| 3d6e5781-e3ac-4106-bfed-0aa0dd3af1f8 | available | None | 1 |
+--------------------------------------+-----------+------+------+
* [Solution-A-step-1]Copy
volumes/volume-3d6e5781-e3ac-4106-bfed-0aa0dd3af1f8 from "volumes" pool to
"images" pool.
::
.. code-block:: bash
root@devaio:/home# time rbd cp
volumes/volume-3d6e5781-e3ac-4106-bfed-0aa0dd3af1f8 images/test
@ -106,7 +107,7 @@ the time-consuming between solution A and solution B.
* [Solution-B-step-1]Create a snapshot of volume
3d6e5781-e3ac-4106-bfed-0aa0dd3af1f8 and protect it.
::
.. code-block:: bash
root@devaio:/home# time rbd snap create --pool volumes --image
volume-3d6e5781-e3ac-4106-bfed-0aa0dd3af1f8 --snap image_test
@ -125,7 +126,7 @@ the time-consuming between solution A and solution B.
* [Solution-B-step-2]Do clone operation on
volumes/volume-3d6e5781-e3ac-4106-bfed-0aa0dd3af1f8@image_test.
::
.. code-block:: bash
root@devaio:/home# time rbd clone
volumes/volume-3d6e5781-e3ac-4106-bfed-0aa0dd3af1f8@image_test
@ -137,7 +138,7 @@ the time-consuming between solution A and solution B.
* [Solution-B-step-3]Flatten the clone image images/snapshot_clone_image_test.
::
.. code-block:: bash
root@devaio:/home# time rbd flatten images/snapshot_clone_image_test
@ -150,7 +151,7 @@ the time-consuming between solution A and solution B.
* [Solution-B-step-4]Unprotect the snap
volumes/volume-3d6e5781-e3ac-4106-bfed-0aa0dd3af1f8@image_test.
::
.. code-block:: bash
root@devaio:/home# time rbd snap unprotect
volumes/volume-3d6e5781-e3ac-4106-bfed-0aa0dd3af1f8@image_test
@ -162,7 +163,7 @@ the time-consuming between solution A and solution B.
* [Solution-B-step-5]Delete the no dependency snap
volumes/volume-3d6e5781-e3ac-4106-bfed-0aa0dd3af1f8@image_test.
::
.. code-block:: bash
root@devaio:/home# time rbd snap rm
volumes/volume-3d6e5781-e3ac-4106-bfed-0aa0dd3af1f8@image_test

40
specs/liberty/replication_v2.rst
View File

@ -59,6 +59,8 @@ could easily be extended to be included in future work. Backend devices
(drivers) would be listed in the cinder.conf file and we add entries
to indicate pairing. This could look something like this in the conf file:
.. code-block:: ini
[driver-foo]
volume_driver=xxxx
valid_replication_devices='backend=backend_name-a',
@ -67,12 +69,16 @@ to indicate pairing. This could look something like this in the conf file:
Alternatively the replication target can potentially be a device unknown
to Cinder
.. code-block:: ini
[driver-foo]
volume_driver=xxxx
valid_replication_devices='remote_device={'some unique access meta}',...
Or a combination of the two even
.. code-block:: ini
[driver-foo]
volume_driver=xxxx
valid_replication_devices='remote_device={'some unique access meta}',
@ -93,17 +99,19 @@ from the create call. The flow would be something like this:
scheduler.
* Add the following API calls
enable_replication(volume)
disable_replication(volume)
failover_replicated_volume(volume)
udpate_replication_targets()
[mechanism to add tgts external to the conf file * optional]
get_replication_targets()
[mechanism for an admin to query what a backend has configured]
- enable_replication(volume)
- disable_replication(volume)
- failover_replicated_volume(volume)
- update_replication_targets()
+ [mechanism to add tgts external to the conf file * optional]
- get_replication_targets()
+ [mechanism for an admin to query what a backend has configured]
Special considerations
-----------------
----------------------
* volume-types
There should not be a requirement of an exact match of volume-types between
the primary and secondary volumes in the replication set. If a backend "can"
@ -154,10 +162,12 @@ Special considerations
Workflow diagram
-----------------
Create call on the left:
No change to workflow
* No change to workflow
Replication calls on the right:
Direct to manager then driver via host entry
* Direct to manager then driver via host entry
.. code-block:: console
+-----------+
+--< +Volume API + >---------+ Enable routing directly to
@ -218,12 +228,12 @@ REST API impact
---------------
We would need to add the API calls mentioned above:
enable_replication(volume)
disable_replication(volume)
failover_replicated_volume(volume)
udpate_replication_targets()
* enable_replication(volume)
* disable_replication(volume)
* failover_replicated_volume(volume)
* udpate_replication_targets()
[mechanism to add tgts external to the conf file * optional]
get_replication_targets()
* get_replication_targets()
[mechanism for an admin to query what a backend has configured]
I think augmenting the existing calls is better than reusing them, but we can

3
specs/liberty/rootwrap-daemon-mode.rst
View File

@ -90,6 +90,7 @@ in Neutron shows over 10x speedup comparing to usual ``sudo rootwrap`` call.
Total speedup for Cinder shows impressive results too [#rw_perf]:
test scenario CinderVolumes.create_and_delete_volume
Current performance :
+----------------------+-----------+-----------+-----------+-------+
| action | min (sec) | avg (sec) | max (sec) | count |
+----------------------+-----------+-----------+-----------+-------+
@ -97,6 +98,7 @@ Current performance :
| cinder.delete_volume | 13.535 | 24.958 | 32.959 | 8 |
| total | 16.314 | 30.718 | 35.96 | 8 |
+----------------------+-----------+-----------+-----------+-------+
Load duration: 131.423681974
Full duration: 135.794852018
@ -109,6 +111,7 @@ With use_rootwrap_daemon enabled:
| cinder.delete_volume | 2.183 | 2.226 | 2.353 | 8 |
| total | 4.673 | 4.845 | 5.3 | 8 |
+----------------------+-----------+-----------+-----------+-------+
Load duration: 19.7548749447
Full duration: 22.2729279995

40
specs/liberty/rpc-object-compatibility.rst
View File

@ -115,23 +115,25 @@ Data model impact
A new table, called service_versions, would be created to track the RPC and
object versions. The schema would be as follows:
service_versions = Table(
'service_versions', meta,
Column('created_at', DateTime(timezone=False)),
Column('updated_at', DateTime(timezone=False)),
Column('deleted_at', DateTime(timezone=False)),
Column('deleted', Boolean(create_constraint=True, name=None)),
Column('id', Integer, primary_key=True, nullable=False),
Column('service_id', String(length=255)),
Column('rpc_current_version', String(length=36)),
Column('rpc_available_version', String(length=36)),
Column('object_current_version', String(length=36)),
Column('object_available_version', String(length=36)),
mysql_engine='InnoDB'
)
.. code-block:: python
The service_id is service name + host. The *_current_version is the version
a service is currently running and pinned at. The *_available_version is the
service_versions = Table(
'service_versions', meta,
Column('created_at', DateTime(timezone=False)),
Column('updated_at', DateTime(timezone=False)),
Column('deleted_at', DateTime(timezone=False)),
Column('deleted', Boolean(create_constraint=True, name=None)),
Column('id', Integer, primary_key=True, nullable=False),
Column('service_id', String(length=255)),
Column('rpc_current_version', String(length=36)),
Column('rpc_available_version', String(length=36)),
Column('object_current_version', String(length=36)),
Column('object_available_version', String(length=36)),
mysql_engine='InnoDB'
)
The service_id is service name + host. The \*_current_version is the version
a service is currently running and pinned at. The \*_available_version is the
version a service knows about and (if newer) could upgrade to.
REST API impact
@ -205,17 +207,17 @@ Work Items
* Register each cinder service's RPC and object versions on startup.
* Create RPC compatibility layer in each cinder component's rpcapi.py to
massage the object and RPC interface before it is sent over RPC.
massage the object and RPC interface before it is sent over RPC.
* Create a "cinder-manage version upgrade" CLI to switch each cinder service
to use the latest versions.
to use the latest versions.
Dependencies
============
* oslo_versionobjects for volumes, backups, service, consistency_group,
quota need to be merged so that objects can be made backwards compatible.
quota need to be merged so that objects can be made backwards compatible.
Testing

15
specs/liberty/support-force-delete-backup.rst
View File

@ -63,12 +63,17 @@ None
REST API impact
---------------
Add a new REST API to delete backup in v2::
*POST /v2/{tenant_id}/backups/{id}/action
Add a new REST API to delete backup in v2:
{
"os-force_delete": {}
}
.. code-block:: console
POST /v2/{tenant_id}/backups/{id}/action
.. code-block:: python
{
"os-force_delete": {}
}
Normal http response code:
202

33
specs/liberty/support-import-export-snapshots.rst
View File

@ -34,8 +34,7 @@ Benefits:
* Import snapshots function could provide an effective means to manage the
import volumes.
::
::
For those volume drivers which could not delete volume with snapshots,
we could not delete the import volume that has snapshots.
By using import snapshots function to import snapshots, we could first
@ -97,8 +96,13 @@ REST API impact
1. Add one API "manage_snapshot"
The rest API look like this in v2::
/v2/{project_id}/os-snapshot-manage
The rest API look like this in v2:
.. code-block: console
POST /v2/{project_id}/os-snapshot-manage
.. code-block:: python
{
'snapshot':{
@ -110,13 +114,17 @@ The rest API look like this in v2::
* The <string> 'host' means cinder volume host name.
No default value.
* The <string> 'volume_id' means the import snapshot's volume id.
No default value.
* The <string> 'ref' means the import snapshot name
exist in storage back-end.
No default value.
The response body of it is like::
The response body of it is like:
.. code-block:: python
{
"snapshot": {
@ -142,12 +150,17 @@ The response body of it is like::
2. Add one API "unmanage_snapshot".
The rest API look like this in v2::
/v2/{project_id}/os-snapshot-manage/{id}/action
The rest API look like this in v2:
{
'os-unmanage':{}
}
.. code-block:: console
POST /v2/{project_id}/os-snapshot-manage/{id}/action
.. code-block:: python
{
'os-unmanage':{}
}
The status code will be HTTP 202 when the request has succeeded.

107
specs/liberty/support-modify-volume-image-metadata.rst
View File

@ -129,27 +129,42 @@ the operations on image metadata of volume.
**Common http response code(s)**
* Modify Success: `200 OK`
* Failure: `400 Bad Request` with details.
* Forbidden: `403 Forbidden` e.g. no permission to update the
specific metadata
* Not found: `501 Not Implemented` e.g. The server doesn't recognize
the request method
* Not found: `405 Not allowed` e.g. HEAD is not allowed on the resource
* Forbidden: `403 Forbidden`
e.g. no permission to update the specific metadata
* Not found: `501 Not Implemented`
e.g. The server doesn't recognize the request method
* Not found: `405 Not allowed`
e.g. HEAD is not allowed on the resource
**Update volume image metadata**
* Method type
PUT
* API version
PUT /v2/{project_id}/volumes/{volume_id}/image_metadata
.. code-block:: console
PUT /v2/{project_id}/volumes/{volume_id}/image_metadata
* JSON schema definition
{
"image_metadata": {
"key": "v2"
}
}
.. code-block:: python
{
"image_metadata": {
"key": "v2"
}
}
To unset a image metadata key value, specify only the key name.
To set a image metadata key value, specify the key and value pair.
@ -174,8 +189,10 @@ Other end user impact
* Provide Cinder API to allow a user to update an image property.
CLI-python API that triggers the update.
# Sets or deletes volume image metadata
cinder image-metadata  <volume-id> set <property-name = value>
.. code-block:: console
# Sets or deletes volume image metadata
cinder image-metadata  <volume-id> set <property-name = value>
Performance Impact
------------------
@ -221,23 +238,30 @@ Changes to Cinder:
#. Define property protections config files in Cinder
(Deployer need to keep the files in sync with Glance's)
#. Sync the properties protection code from Glance into Cinder
(The common protection code will be shared in Cinder)
#. Extend existing volume_image_metadatas(VolumeImageMetadataController)
controller extension to add update capability.
#. Reuse update_volume_metadata method in volume API for updating image
metadata and differentiate user/image metadata by introducing a new
constant "meta_type"
#. Add update_volume_image_metadata method to volume API.
#. Check against property protections config files
(property-protections-policies.conf or property-protections-roles.conf)
if the property has update protection.
#. Update DB API and driver to allow image metadata updates.
Changes to Cinder python client:
#. Provide Cinder API to allow a user to update an image property.
CLI-python API that triggers the update.
# Sets or deletes volume image metadata
cinder image-metadata  <volume-id> set <property-name = value>
@ -269,39 +293,40 @@ We propose to define two samples config file in favor of Property Protections,
that is property-protections-roles.conf and property-protections-policies.conf.
* property-protections-policies.conf
This is a template file when using policy rule for property protections.
This is a template file when using policy rule for property protections.
Example: Limit all property interactions to admin only using policy
rule context_is_admin defined in policy.json.
Example: Limit all property interactions to admin only using policy
rule context_is_admin defined in policy.json.
+-------------------------------------------------------------------+
| [.*] |
+===================================================================+
| create = context_is_admin |
+-------------------------------------------------------------------+
| read = context_is_admin |
+-------------------------------------------------------------------+
| update = context_is_admin |
+-------------------------------------------------------------------+
| delete = context_is_admin |
+-------------------------------------------------------------------+
+-------------------------------------------------------------------+
| [.*] |
+===================================================================+
| create = context_is_admin |
+-------------------------------------------------------------------+
| read = context_is_admin |
+-------------------------------------------------------------------+
| update = context_is_admin |
+-------------------------------------------------------------------+
| delete = context_is_admin |
+-------------------------------------------------------------------+
* property-protections-roles.conf
This is a template file when property protections is based on user's role.
Example: Allow both admins and users with the billing role to read and modify
properties prefixed with x_billing_code_.
+-------------------------------------------------------------------+
| [^x_billing_code_.*] |
+===================================================================+
| create = admin,billing |
+-------------------------------------------------------------------+
| read = admin, billing |
+-------------------------------------------------------------------+
| update = admin,billing |
+-------------------------------------------------------------------+
| delete = admin,billing |
+-------------------------------------------------------------------+
This is a template file when property protections is based on user's role.
Example: Allow both admins and users with the billing role to read and modify
properties prefixed with ``x_billing_code_``.
+-------------------------------------------------------------------+
| [^x_billing_code_.*] |
+===================================================================+
| create = admin,billing |
+-------------------------------------------------------------------+
| read = admin, billing |
+-------------------------------------------------------------------+
| update = admin,billing |
+-------------------------------------------------------------------+
| delete = admin,billing |
+-------------------------------------------------------------------+
Please refer to here, http://docs.openstack.org/developer/glance/property-protections.html
for the details explanation of the format.

9
specs/liberty/volume-and-snap-delete.rst
View File

@ -52,7 +52,9 @@ it's reasonable to figure that a user shouldn't have to handle this).
There are two losses of performance in requiring back and forth between
cinder-volume and the backend to delete a volume and snapshots:
A. Extra time spent checking the status of X requests.
B. Time spent merging snapshot data into another snapshot or volume
which is going to immediately be deleted.
@ -95,20 +97,27 @@ This case is for volume drivers that wish to handle mass volume/snapshot
deletion in an optimized fashion.
When a volume delete request is received:
Starting in the volume manager...
1. Check for a driver capability of 'volume_with_snapshots_delete'.
(Name TBD.) This will be a new abc driver feature.
2. If the driver supports this, call driver.delete_volume_and_snapshots().
This will be passed the volume, and a list of all relevant
snapshots.
3. No exception thrown by the driver will indicate that everything
was successfully deleted. The driver may return information indicating
that the volume itself is intact, but snapshot operations failed.
4. Volume manager now moves all snapshots and the volume from 'deleting'
to deleted. (volume_destroy/snapshot_destroy)
5. If an exception occurred, set the volume and all snapshots to
'error_deleting'. We don't have enough information to do anything
else safely.
6. The driver returns a list of dicts indicating the new statuses of
the volume and each snapshot. This allows handling cases where
deletion of some things succeeded but the process did not complete.

2
specs/mitaka/cinder-volume-active-active-support.rst
View File

@ -36,7 +36,7 @@ On API nodes given current code we are open to races in the code that affect
resources on the database, and this will be exacerbated when working with
Active/Active configurations.
Manager Local Locks
Local Manager Locks
-------------------
We have multiple local locks in the manager code of the volume nodes to prevent

2
specs/mitaka/ha-aa-tooz-locks.rst
View File

@ -84,7 +84,7 @@ Cinder deployments use these drivers. Also some non-RemoteFS-based drivers are
using local locks too.
We could also replace current locks with some DB-based locking. This was
proposed by gegulieo in specs to remove local locks from the maanger_ and from
proposed by gegulieo in specs to remove local locks from the manager_ and from
drivers_, but increased the complexity of the solution and potentially required
more testing than relying on a broadly used DLM software.

13
specs/newton/async-volume-migration.rst
View File

@ -20,8 +20,10 @@ is totally complete.
Both the dd way or driver-specific way will fail if we attach a volume when
it is migrating:
* If we migrate the volume through dd way, the source or target volume is not
usable to server.
usable to server.
* If we migrate the volume through driver-specific way, the migration task is
issued to the source backend by scheduler and the volume is owned by the
source backend during the whole migration. If we attach this volume to a
@ -61,11 +63,12 @@ just add a new way for developers or users to choose.
These features are:
* One array can take over other array's LUN as a remote LUN if these two
arrays are connected with FC or iSCSI fabric.
arrays are connected with FC or iSCSI fabric.
* We can migrate a remote LUN to a local LUN and meanwhile the remote(source)
LUN is writable and readable with the migration task is undergoing, after the
migration is completed, the local(target) LUN is exactly the same as the
remote(source) LUN and no data will be lost.
LUN is writable and readable with the migration task is undergoing, after the
migration is completed, the local(target) LUN is exactly the same as the
remote(source) LUN and no data will be lost.
To enable one array to take over other array's volume, we should allow one
driver to call other drivers' interfaces directly or indirectly. These two

1
specs/newton/differentiate-thick-thin-in-scheduler.rst
View File

@ -146,6 +146,7 @@ References
A patch is proposed in Manila to solve a similar problem:
https://review.openstack.org/#/c/315266/
Note that capabilities reporting for thin and thick provisioning
in Manila is different from that in Cinder. In Manila, a driver reports
`thin_provisioning = [True, False]` if it supports both thin and thick;

6
specs/newton/generic-volume-group.rst
View File

@ -380,13 +380,17 @@ New Group APIs
* V3/<tenant id>/groups/<group uuid>/action
* Method: POST (We need to use "POST" not "DELETE" here because the request
body has a flag and therefore is not empty.)
* JSON schema definition for V3::
* JSON schema definition for V3:
.. code-block:: python
{
"delete":
{
"delete-volumes": False
}
}
* Set delete-volumes flag to True to delete a group with volumes in it.
This will delete the group and all the volumes. Deleting an empty
group does not need the flag to be True.

10
specs/newton/group-snapshots.rst
View File

@ -50,11 +50,17 @@ corresponding to some existing CG APIs.
The missing pieces to support the existing CG feature using the generic
volume contructs are as follows.
* A group_snapshots table (for cgsnapshots table)
* Create group snapshot API (for create cgsnapshot)
* Delete group snapshot API (for delete cgsnapshot)
* List group snapshots API (for list cgsnapshots)
* Show group snapshot API (for show cgsnapshot)
* Create group from source group or source group snapshot API (for
create CG from cgsnapshot or source CG)
@ -158,7 +164,11 @@ Proposed change
type spec, the manager will call create_group in the driver first and will
call create_consistencygroup in the driver if create_group is not
implemented.
.. code-block:: python
{'consistent_group_snapshot_enabled': <is> True}
Same applies to delete_group, update_group, create_group_snapshot,
delete_group_snapshot, and create_group_from_src. This way the new APIs
will work with existing driver implementation of CG functions.

5
specs/newton/ha-aa-manager_locks.rst
View File

@ -73,7 +73,7 @@ in Active-Active environments.
Proposed change
===============
This spec suggests modifying behavior introduced by `Tooz locks for A/A spec`_
This spec suggests modifying behavior introduced by `Tooz locks for A/A`_
for the case where the drivers don't need distributed locks. So we would use
local file locks in the drivers (if they use any) and for the locks in the
manager we would use a locking mechanism based on the ``workers`` table that
@ -137,13 +137,16 @@ On a closer look at these 4 locks mentioned before we can classify them in 2
categories:
- Locks for the resource of the operation.
- *${VOL_UUID}-detach_volume* - Used in ``detach_volume`` to prevent
multiple simultaneous detaches
- *${VOL_UUID}* - Used in ``attach_volume`` to prevent multiple
simultaneous attaches
- Locks that prevent deletion of the source of a volume creation (they are
created by ``create_volume`` method):
- *${VOL_UUID}-delete_volume* - Used in ``delete_volume``
- *${SNAPSHOT_UUID}-delete_snapshot* - Used in ``delete_snapshot``

35
specs/newton/improvement-to-query-consistency-group-detail.rst
View File

@ -59,22 +59,31 @@ REST API impact
---------------
* Add volume id list into response body of querying a CG detail if specifying
the argument 'list_volume=True', this will be dependent on the Generic Group
spec now, so just leave a example here::
the argument 'list_volume=True', this will be dependent on the Generic Group
spec now, so just leave a example here:
GET /v3/{project_id}/consistencygroups/{consistency_group_id}?list_volume=True
RESP BODY: {"consistencygroup": {"status": "XXX",
"description": "XXX",
...,
"volume_list":['volume_id1',
...,
'volume_idn']
}
}
.. code-block:: console
* Add a filter "group_id=xxx" in URL of querying volume list/detail::
GET /v3/{project_id}/consistencygroups/{consistency_group_id}?list_volume=True
GET /v3/{project_id}/volumes?group_id=XXX
RESP BODY:
.. code-block:: python
{"consistencygroup": {"status": "XXX",
"description": "XXX",
...,
"volume_list":['volume_id1',
...,
'volume_idn']
}
}
* Add a filter "group_id=xxx" in URL of querying volume list/detail:
.. code-block:: console
GET /v3/{project_id}/volumes?group_id=XXX
Security impact
---------------

2
specs/newton/linux-ficon-support.rst
View File

@ -188,8 +188,8 @@ In ``os-brick/initiator/linuxfc.py``:
* new class LinuxFibreChannelECKD
.. code-block:: python
::
def configure_eckd_device(self, device_number):
"""Add the eckd volume to the Linux configuration. """

13
specs/newton/specify-volume_type-and-availability_zone-for-backup-restore-API.rst
View File

@ -91,12 +91,13 @@ Modify REST API to restore backup:
* Add volume_type and availability_zone in request body
* JSON request schema definition:
'backup-restore': {
'volume_id': volume_id,
'volume_type': volume_type,
'availability_zone': availability_zone,
'name': name
}
.. code-block:: python
'backup-restore': {
'volume_id': volume_id,
'volume_type': volume_type,
'availability_zone': availability_zone,
'name': name}
Security impact
---------------

3
specs/ocata/support-reset-generic-group-and-group-snapshot-status.rst
View File

@ -181,4 +181,5 @@ New admin docs to explain how to use the API.
References
==========
None
None

3
specs/pike/add-like-filter.rst
View File

@ -168,4 +168,5 @@ References
_`[1]`: https://review.openstack.org/#/c/45026/
_`[2]`: https://review.openstack.org/#/c/266688/
_`[3]`: https://en.wikipedia.org/wiki/ReDoS
_`[4]`: https://review.openstack.org/#/c/441516/
_`[4]`: https://review.openstack.org/#/c/441516/

2
specs/pike/cinder-volume-revert-by-snapshot.rst
View File

@ -19,7 +19,7 @@ we are proposing in Ocata `[1]`_.
The revert process will overwrite the current state and data of the volume.
If the volume was extended after the snapshot, the request would be rejected
(reason is described in proposed change section). It's assumed that the user
(reason is described in proposed change section). It's assumed that the user
doing a revert is discarding the actual state and data of the volume.
The purpose of this feature is to give users the possibility of recover

63
specs/pike/dynamic_reconfiguration.rst
View File

@ -23,13 +23,15 @@ made provides a much more realistic view of how users interact with services.
Use Cases
=========
* Allows developers testing a new configuration option to change what the
option is set to and test without having to restart all the Cinder services.
option is set to and test without having to restart all the Cinder services.
* Allows developers to test new functionality implemented in a driver by
enabling and disabling configuration options in cinder.conf without
restarting Cinder services each time the option value is changed from
'disabled' to 'enabled'.
enabling and disabling configuration options in cinder.conf without
restarting Cinder services each time the option value is changed from
'disabled' to 'enabled'.
* Allows admins to manage ip addresses for various backends in cinder.conf
and have the connections dynamically update.
and have the connections dynamically update.
Proposed change
===============
@ -50,25 +52,27 @@ this is a sizable issue that needs to be investigated.
Alternatives
------------
* Manual Approach: Continue to manually restart Cinder services when changes
are made to settings in the cinder.conf file. This is the current approach and
is what we are trying to get around.
are made to settings in the cinder.conf file. This is the current approach
and is what we are trying to get around.
* Reload & Restart Approach: First each process would need to finish the
actions that were ongoing. Next the db and RPC connections would need to
be dropped and then all caches and all driver caches would need to be
flushed before reloading. This approach adds a lot of complexity and lots of
possibilities for failure since each cache has to be flushed- things could get
missed or not flushed properly.
actions that were ongoing. Next the db and RPC connections would need to
be dropped and then all caches and all driver caches would need to be
flushed before reloading. This approach adds a lot of complexity and lots of
possibilities for failure since each cache has to be flushed- things could
get missed or not flushed properly.
* File Watcher: Code will be added to the cinder processes to watch for
changes to the cinder.conf file. Once the processes see that changes have been
made, the process will drain and take the necessary actions to reconfigure
itself and then auto-restart. This capability could also be controlled by a
configuration option so that if the user didn't want dynamic reconfiguration
enabled, they could just disable it in the cinder.conf file. This approach is
dangerous because it wouldn't account for configuration options that are saved
into variables. To fix these cases, there would be a sizeable impact for
developers finding and replacing all instances of configuration variables and
in doing so a number of assumptions of deployment, configuration, tools, and
packaging would be broken.
changes to the cinder.conf file. Once the processes see that changes have
been made, the process will drain and take the necessary actions to
reconfigure itself and then auto-restart. This capability could also be
controlled by a configuration option so that if the user didn't want dynamic
reconfiguration enabled, they could just disable it in the cinder.conf file.
This approach is dangerous because it wouldn't account for configuration
options that are saved into variables. To fix these cases, there would be a
sizeable impact for developers finding and replacing all instances of
configuration variables and in doing so a number of assumptions of
deployment, configuration, tools, and packaging would be broken.
Data model impact
-----------------
@ -118,13 +122,14 @@ Secondary assignee:
Work Items
----------
*Implement handling of SIGHUP signal
**Ensure caches are cleared
**Dependent vars are updated
**Connections are cleanly dropped
*Write Unit tests
*Testing on a variety of drivers
*Update devref to describe SIGHUP/reload process
* Implement handling of SIGHUP signal
- Ensure caches are cleared
- Dependent vars are updated
- Connections are cleanly dropped
* Write Unit tests
* Testing on a variety of drivers
* Update devref to describe SIGHUP/reload process
Dependencies
============

3
specs/pike/explicit-user-messages.rst
View File

@ -122,9 +122,12 @@ The proposed changes are:
VOLUME_BACKUP_001_0002 : ({PROJECT}_{RESOURCE}_{ACTION_ID}_{MESSAGE_ID})
We could have these benefits:
1. We don't need to define that much events. (we only need to
define less messages).
2. It's also unique cross all of OpenStack.
3. It's reading friendly and easy to classify or analysis.
Alternatives

61
specs/pike/replication-group.rst
View File

@ -198,40 +198,44 @@ URL for the group action API from the Generic Volume Group design::
* Enable replication
** Method: POST
- Method: POST
** JSON schema definition for V3::
- JSON schema definition for V3:
.. code-block:: python
{
'enable_replication':
{
}
'enable_replication': {}
}
** Normal response codes: 202
- Normal response codes: 202
** Error response codes: 400, 403, 404
- Error response codes: 400, 403, 404
* Disable replication
** Method: POST
- Method: POST
- JSON schema definition for V3:
.. code-block:: python
** JSON schema definition for V3::
{
'disable_replication':
{
}
'disable_replication': {}
}
** Normal response codes: 202
- Normal response codes: 202
** Error response codes: 400, 403, 404
- Error response codes: 400, 403, 404
* Failover replication
** Method: POST
- Method: POST
- JSON schema definition for V3:
.. code-block:: python
** JSON schema definition for V3::
{
'failover_replication':
{
@ -240,22 +244,26 @@ URL for the group action API from the Generic Volume Group design::
}
}
** Normal response codes: 202
- Normal response codes: 202
** Error response codes: 400, 403, 404
- Error response codes: 400, 403, 404
* List replication targets
** Method: POST
- Method: POST
- JSON schema definition for V3:
.. code-block:: python
** JSON schema definition for V3::
{
'list_replication_targets':
{
}
'list_replication_targets': {}
}
** Response example::
- Response example:
.. code-block:: python
{
'replication_targets': [
{
@ -271,7 +279,10 @@ URL for the group action API from the Generic Volume Group design::
]
}
** Response example for non-admin::
- Response example for non-admin:
.. code-block:: python
{
'replication_targets': [
{

2
specs/pike/shared-backend-config.rst
View File

@ -208,7 +208,7 @@ Work Items
* Add a warning when initializing c-vol without "enabled_backends"
* Modify the driver config utility to look for this section first, and override
values with backend specific ones if they are defined.
values with backend specific ones if they are defined.
* Add some unit tests
* Incorporate into multi-backend tempest test configuration

18
specs/queens/cheesecake-promote-backend.rst
View File

@ -24,21 +24,21 @@ Current Workflow
2. Failure Occurs
3. Fail over
4. Promote Secondary Backend
a. Freeze backend to prevent manage operations
b. Stop cinder volume service
c. Update cinder.conf to have backend A replaced with B and B with C
d. *Hack db to set backend to no longer be in 'failed-over' state*
* This is the step this spec is concerned with
* Example:
::
a. Freeze backend to prevent manage operations
b. Stop cinder volume service
c. Update cinder.conf to have backend A replaced with B and B with C
d. *Hack db to set backend to no longer be in 'failed-over' state*
This is the step this spec is concerned with. Example:
::
update services set disabled=0,
disabled_reason=NULL,
replication_status='enabled',
active_backend_id=NULL
where id=3;
e. Start cinder volume service
f. Unfreeze backend
e. Start cinder volume service
f. Unfreeze backend
Use Cases
=========

26
specs/queens/report-backend-state-in-service-list.rst
View File

@ -65,17 +65,23 @@ REST API impact
Add backend_state: up/down into response body of service list and also need
a microversions for this feature:
* GET /v3/{project_id}/os-services
.. code-block:: console
RESP BODY: {"services": [{"host": "host@backend1",
...,
"backend_status": "up",
},
{"host": "host@backend2",
...,
"backend_status": "down",
}]
}
GET /v3/{project_id}/os-services
RESP BODY:
.. code-block:: python
{"services": [{"host": "host@backend1",
...,
"backend_status": "up",
},
{"host": "host@backend2",
...,
"backend_status": "down",
}]
}
Security impact
---------------

6
specs/queens/v3-api-validation.rst
View File

@ -301,10 +301,12 @@ remove the existing validation of parameters which is there inside of
controller methods which will again break the v2 apis.
Solution:
1] Do the schema validation for v3 apis using the @validation.schema decorator
1. Do the schema validation for v3 apis using the @validation.schema decorator
similar to Nova and also keep the validation code which is there inside of
method to keep v2 working.
2] Once the decision is made to remove the support to v2 we should remove the
2. Once the decision is made to remove the support to v2 we should remove the
validation code from inside of method.

2
specs/template.rst
View File

@ -44,7 +44,7 @@ Some notes about using this template:
as changing parameters which can be returned or accepted, or even
the semantics of what happens when a client calls into the API, then
you should add the APIImpact flag to the commit message. Specifications with
the APIImpact flag can be found with the following query::
the APIImpact flag can be found with the following query:
https://review.openstack.org/#/q/status:open+project:openstack/cinder-specs+message:apiimpact,n,z

0
tests/__init__.py
View File

129
tests/test_titles.py
View File

@ -1,129 +0,0 @@
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
import glob
import os
import re
import docutils.core
import testtools
class TestTitles(testtools.TestCase):
def _get_title(self, section_tree):
section = {
'subtitles': [],
}
for node in section_tree:
if node.tagname == 'title':
section['name'] = node.rawsource
elif node.tagname == 'section':
subsection = self._get_title(node)
section['subtitles'].append(subsection['name'])
return section
def _get_titles(self, spec):
titles = {}
for node in spec:
if node.tagname == 'section':
section = self._get_title(node)
titles[section['name']] = section['subtitles']
return titles
def _check_titles(self, spec, titles):
self.assertEqual(8, len(titles),
"Titles count in '%s' doesn't match expected" % spec)
problem = 'Problem description'
self.assertIn(problem, titles)
self.assertIn('Use Cases', titles)
proposed = 'Proposed change'
self.assertIn(proposed, titles)
self.assertIn('Alternatives', titles[proposed])
self.assertIn('Data model impact', titles[proposed])
self.assertIn('REST API impact', titles[proposed])
self.assertIn('Security impact', titles[proposed])
self.assertIn('Notifications impact', titles[proposed])
self.assertIn('Other end user impact', titles[proposed])
self.assertIn('Performance Impact', titles[proposed])
self.assertIn('Other deployer impact', titles[proposed])
self.assertIn('Developer impact', titles[proposed])
impl = 'Implementation'
self.assertIn(impl, titles)
self.assertIn('Assignee(s)', titles[impl])
self.assertIn('Work Items', titles[impl])
deps = 'Dependencies'
self.assertIn(deps, titles)
testing = 'Testing'
self.assertIn(testing, titles)
docs = 'Documentation Impact'
self.assertIn(docs, titles)
refs = 'References'
self.assertIn(refs, titles)
def _check_lines_wrapping(self, tpl, raw):
for i, line in enumerate(raw.split("\n")):
if "http://" in line or "https://" in line:
continue
self.assertTrue(
len(line) < 80,
msg="%s:%d: Line limited to a maximum of 79 characters." %
(tpl, i + 1))
def _check_no_cr(self, tpl, raw):
matches = re.findall('\r', raw)
self.assertEqual(
len(matches), 0,
"Found %s literal carriage returns in file %s" %
(len(matches), tpl))
def _check_trailing_spaces(self, tpl, raw):
for i, line in enumerate(raw.split("\n")):
trailing_spaces = re.findall(" +$", line)
msg = "Found trailing spaces on line %s of %s" % (i + 1, tpl)
self.assertEqual(len(trailing_spaces), 0, msg)
def test_template(self):
# NOTE (e0ne): adding 'template.rst' to ignore dirs to exclude it from
# os.listdir output
ignored_dirs = {'template.rst', 'api'}
files = ['specs/template.rst']
# NOTE (e0ne): We don't check specs in 'api' directory because
# they don't match template.rts. Uncomment code below it you want
# to test them.
# files.extend(glob.glob('specs/api/*/*'))
releases = set(os.listdir('specs')) - ignored_dirs
for release in releases:
specs = glob.glob('specs/%s/*' % release)
files.extend(specs)
for filename in files:
self.assertTrue(filename.endswith(".rst"),
"spec's file must use 'rst' extension.")
with open(filename) as f:
data = f.read()
spec = docutils.core.publish_doctree(data)
titles = self._get_titles(spec)
self._check_titles(filename, titles)
self._check_lines_wrapping(filename, data)
self._check_no_cr(filename, data)
self._check_trailing_spaces(filename, data)

16
tox.ini
View File

@ -1,6 +1,6 @@
[tox]
minversion = 1.6
envlist = docs,py27,py35,pep8
envlist = docs,pep8
skipsdist = True
[testenv]
@ -9,20 +9,22 @@ install_command = pip install -U {opts} {packages}
setenv =
VIRTUAL_ENV={envdir}
deps = -r{toxinidir}/requirements.txt
commands = python setup.py testr --slowest --testr-args='{posargs}'
[testenv:docs]
commands = python setup.py build_sphinx
whitelist_externals = rm
commands =
rm -fr doc/build
python setup.py build_sphinx
doc8 --ignore D001 doc/source
[testenv:pep8]
commands = flake8
commands =
flake8
doc8 --ignore D001 specs/
[testenv:venv]
commands = {posargs}
[testenv:cover]
commands = python setup.py testr --coverage --testr-args='{posargs}'
[flake8]
# E123, E125 skipped as they are invalid PEP-8.