diff --git a/doc/source/index.rst b/doc/source/index.rst
index be77dc12a5..855a2d6b2b 100644
--- a/doc/source/index.rst
+++ b/doc/source/index.rst
@@ -163,7 +163,6 @@ Scripts
 * `lib/ldap <lib/ldap.html>`__
 * `lib/neutron <lib/neutron.html>`__
 * `lib/nova <lib/nova.html>`__
-* `lib/opendaylight <lib/opendaylight.html>`__
 * `lib/oslo <lib/oslo.html>`__
 * `lib/rpc\_backend <lib/rpc_backend.html>`__
 * `lib/sahara <lib/sahara.html>`__
@@ -183,7 +182,6 @@ Scripts
 * `extras.d/70-trove.sh <extras.d/70-trove.sh.html>`__
 * `extras.d/70-tuskar.sh <extras.d/70-tuskar.sh.html>`__
 * `extras.d/70-zaqar.sh <extras.d/70-zaqar.sh.html>`__
-* `extras.d/80-opendaylight.sh <extras.d/80-opendaylight.sh.html>`__
 * `extras.d/80-tempest.sh <extras.d/80-tempest.sh.html>`__
 
 Configuration
diff --git a/extras.d/80-opendaylight.sh b/extras.d/80-opendaylight.sh
deleted file mode 100644
index b673777e3a..0000000000
--- a/extras.d/80-opendaylight.sh
+++ /dev/null
@@ -1,76 +0,0 @@
-# opendaylight.sh - DevStack extras script
-
-if is_service_enabled odl-server odl-compute; then
-    # Initial source
-    [[ "$1" == "source" ]] && source $TOP_DIR/lib/opendaylight
-fi
-
-if is_service_enabled odl-server; then
-    if [[ "$1" == "source" ]]; then
-        # no-op
-        :
-    elif [[ "$1" == "stack" && "$2" == "install" ]]; then
-        install_opendaylight
-        configure_opendaylight
-        init_opendaylight
-    elif [[ "$1" == "stack" && "$2" == "post-config" ]]; then
-        configure_ml2_odl
-        # This has to start before Neutron
-        start_opendaylight
-    elif [[ "$1" == "stack" && "$2" == "post-extra" ]]; then
-        # no-op
-        :
-    fi
-
-    if [[ "$1" == "unstack" ]]; then
-        stop_opendaylight
-        cleanup_opendaylight
-    fi
-
-    if [[ "$1" == "clean" ]]; then
-        # no-op
-        :
-    fi
-fi
-
-if is_service_enabled odl-compute; then
-    if [[ "$1" == "source" ]]; then
-        # no-op
-        :
-    elif [[ "$1" == "stack" && "$2" == "install" ]]; then
-        install_opendaylight-compute
-    elif [[ "$1" == "stack" && "$2" == "post-config" ]]; then
-        if is_service_enabled nova; then
-            create_nova_conf_neutron
-        fi
-    elif [[ "$1" == "stack" && "$2" == "extra" ]]; then
-        echo_summary "Initializing OpenDaylight"
-        ODL_LOCAL_IP=${ODL_LOCAL_IP:-$HOST_IP}
-        ODL_MGR_PORT=${ODL_MGR_PORT:-6640}
-        read ovstbl <<< $(sudo ovs-vsctl get Open_vSwitch . _uuid)
-        sudo ovs-vsctl set-manager tcp:$ODL_MGR_IP:$ODL_MGR_PORT
-        if [[ -n "$ODL_PROVIDER_MAPPINGS" ]] && [[ "$ENABLE_TENANT_VLANS" == "True" ]]; then
-            sudo ovs-vsctl set Open_vSwitch $ovstbl \
-                other_config:provider_mappings=$ODL_PROVIDER_MAPPINGS
-        fi
-        sudo ovs-vsctl set Open_vSwitch $ovstbl other_config:local_ip=$ODL_LOCAL_IP
-    elif [[ "$1" == "stack" && "$2" == "post-extra" ]]; then
-        # no-op
-        :
-    fi
-
-    if [[ "$1" == "unstack" ]]; then
-        sudo ovs-vsctl del-manager
-        BRIDGES=$(sudo ovs-vsctl list-br)
-        for bridge in $BRIDGES ; do
-            sudo ovs-vsctl del-controller $bridge
-        done
-
-        stop_opendaylight-compute
-    fi
-
-    if [[ "$1" == "clean" ]]; then
-        # no-op
-        :
-    fi
-fi
diff --git a/lib/opendaylight b/lib/opendaylight
deleted file mode 100644
index 6518673524..0000000000
--- a/lib/opendaylight
+++ /dev/null
@@ -1,215 +0,0 @@
-#!/bin/bash
-#
-# lib/opendaylight
-# Functions to control the configuration and operation of the opendaylight service
-
-# Dependencies:
-#
-# ``functions`` file
-# ``DEST`` must be defined
-# ``STACK_USER`` must be defined
-
-# ``stack.sh`` calls the entry points in this order:
-#
-# - is_opendaylight_enabled
-# - is_opendaylight-compute_enabled
-# - install_opendaylight
-# - install_opendaylight-compute
-# - configure_opendaylight
-# - init_opendaylight
-# - start_opendaylight
-# - stop_opendaylight-compute
-# - stop_opendaylight
-# - cleanup_opendaylight
-
-# Save trace setting
-XTRACE=$(set +o | grep xtrace)
-set +o xtrace
-
-
-# For OVS_BRIDGE and PUBLIC_BRIDGE
-source $TOP_DIR/lib/neutron_plugins/ovs_base
-
-# Defaults
-# --------
-
-# The IP address of ODL. Set this in local.conf.
-# ODL_MGR_IP=
-ODL_MGR_IP=${ODL_MGR_IP:-$SERVICE_HOST}
-
-# The ODL endpoint URL
-ODL_ENDPOINT=${ODL_ENDPOINT:-http://${ODL_MGR_IP}:8080/controller/nb/v2/neutron}
-
-# The ODL username
-ODL_USERNAME=${ODL_USERNAME:-admin}
-
-# The ODL password
-ODL_PASSWORD=${ODL_PASSWORD:-admin}
-
-# Short name of ODL package
-ODL_NAME=${ODL_NAME:-distribution-karaf-0.2.1-Helium-SR1.1}
-
-# <define global variables here that belong to this project>
-ODL_DIR=$DEST/opendaylight
-
-# The OpenDaylight Package, currently using 'Hydrogen' release
-ODL_PKG=${ODL_PKG:-distribution-karaf-0.2.1-Helium-SR1.1.zip}
-
-# The OpenDaylight URL
-ODL_URL=${ODL_URL:-https://nexus.opendaylight.org/content/repositories/public/org/opendaylight/integration/distribution-karaf/0.2.1-Helium-SR1.1/}
-
-# Default arguments for OpenDaylight. This is typically used to set
-# Java memory options.
-# ``ODL_ARGS=Xmx1024m -XX:MaxPermSize=512m``
-ODL_ARGS=${ODL_ARGS:-"-XX:MaxPermSize=384m"}
-
-# How long to pause after ODL starts to let it complete booting
-ODL_BOOT_WAIT=${ODL_BOOT_WAIT:-20}
-
-# The physical provider network to device mapping
-ODL_PROVIDER_MAPPINGS=${ODL_PROVIDER_MAPPINGS:-physnet1:eth1}
-
-# Enable OpenDaylight l3 forwarding
-ODL_L3=${ODL_L3:-False}
-
-# Enable debug logs for odl ovsdb
-ODL_NETVIRT_DEBUG_LOGS=${ODL_NETVIRT_DEBUG_LOGS:-False}
-
-# The logging config file in ODL
-ODL_LOGGING_CONFIG=${ODL_LOGGING_CONFIG:-${ODL_DIR}/${ODL_NAME}/etc/org.ops4j.pax.logging.cfg}
-
-# Entry Points
-# ------------
-
-# Test if OpenDaylight is enabled
-# is_opendaylight_enabled
-function is_opendaylight_enabled {
-    [[ ,${ENABLED_SERVICES} =~ ,"odl-" ]] && return 0
-    return 1
-}
-
-# cleanup_opendaylight() - Remove residual data files, anything left over from previous
-# runs that a clean run would need to clean up
-function cleanup_opendaylight {
-    :
-}
-
-# configure_opendaylight() - Set config files, create data dirs, etc
-function configure_opendaylight {
-    # Add odl-ovsdb-openstack if it's not already there
-    local ODLOVSDB=$(cat $ODL_DIR/$ODL_NAME/etc/org.apache.karaf.features.cfg | grep featuresBoot= | grep odl)
-    if [ "$ODLOVSDB" == "" ]; then
-        sed -i '/^featuresBoot=/ s/$/,odl-ovsdb-openstack/' $ODL_DIR/$ODL_NAME/etc/org.apache.karaf.features.cfg
-    fi
-
-    # Configure OpenFlow 1.3 if it's not there
-    local OFLOW13=$(cat $ODL_DIR/$ODL_NAME/etc/custom.properties | grep ^of.version)
-    if [ "$OFLOW13" == "" ]; then
-        echo "ovsdb.of.version=1.3" >> $ODL_DIR/$ODL_NAME/etc/custom.properties
-    fi
-
-    # Configure L3 if the user wants it
-    if [ "${ODL_L3}" == "True" ]; then
-        # Configure L3 FWD if it's not there
-        local L3FWD=$(cat $ODL_DIR/$ODL_NAME/etc/custom.properties | grep ^ovsdb.l3.fwd.enabled)
-        if [ "$L3FWD" == "" ]; then
-            echo "ovsdb.l3.fwd.enabled=yes" >> $ODL_DIR/$ODL_NAME/etc/custom.properties
-        fi
-    fi
-
-    # Configure DEBUG logs for network virtualization in odl, if the user wants it
-    if [ "${ODL_NETVIRT_DEBUG_LOGS}" == "True" ]; then
-        local OVSDB_DEBUG_LOGS=$(cat $ODL_LOGGING_CONFIG | grep ^log4j.logger.org.opendaylight.ovsdb)
-        if [ "${OVSDB_DEBUG_LOGS}" == "" ]; then
-            echo 'log4j.logger.org.opendaylight.ovsdb = TRACE' >> $ODL_LOGGING_CONFIG
-            echo 'log4j.logger.org.opendaylight.ovsdb.lib = INFO' >> $ODL_LOGGING_CONFIG
-            echo 'log4j.logger.org.opendaylight.ovsdb.openstack.netvirt.impl.NeutronL3Adapter = DEBUG' >> $ODL_LOGGING_CONFIG
-            echo 'log4j.logger.org.opendaylight.ovsdb.openstack.netvirt.impl.TenantNetworkManagerImpl = DEBUG' >> $ODL_LOGGING_CONFIG
-            echo 'log4j.logger.org.opendaylight.ovsdb.plugin.md.OvsdbInventoryManager = INFO' >> $ODL_LOGGING_CONFIG
-        fi
-        local ODL_NEUTRON_DEBUG_LOGS=$(cat $ODL_LOGGING_CONFIG | grep ^log4j.logger.org.opendaylight.controller.networkconfig.neutron)
-        if [ "${ODL_NEUTRON_DEBUG_LOGS}" == "" ]; then
-            echo 'log4j.logger.org.opendaylight.controller.networkconfig.neutron = TRACE' >> $ODL_LOGGING_CONFIG
-        fi
-    fi
-}
-
-function configure_ml2_odl {
-    populate_ml2_config /$Q_PLUGIN_CONF_FILE ml2_odl url=$ODL_ENDPOINT
-    populate_ml2_config /$Q_PLUGIN_CONF_FILE ml2_odl username=$ODL_USERNAME
-    populate_ml2_config /$Q_PLUGIN_CONF_FILE ml2_odl password=$ODL_PASSWORD
-}
-
-# init_opendaylight() - Initialize databases, etc.
-function init_opendaylight {
-    # clean up from previous (possibly aborted) runs
-    # create required data files
-    :
-}
-
-# install_opendaylight() - Collect source and prepare
-function install_opendaylight {
-    local _pwd=$(pwd)
-
-    if is_ubuntu; then
-        install_package maven openjdk-7-jre openjdk-7-jdk
-    else
-        yum_install maven java-1.7.0-openjdk
-    fi
-
-    # Download OpenDaylight
-    mkdir -p $ODL_DIR
-    cd $ODL_DIR
-    wget -N $ODL_URL/$ODL_PKG
-    unzip -u $ODL_PKG
-}
-
-# install_opendaylight-compute - Make sure OVS is installed
-function install_opendaylight-compute {
-    # packages are the same as for Neutron OVS agent
-    _neutron_ovs_base_install_agent_packages
-}
-
-# start_opendaylight() - Start running processes, including screen
-function start_opendaylight {
-    if is_ubuntu; then
-        JHOME=/usr/lib/jvm/java-1.7.0-openjdk-amd64
-    else
-        JHOME=/usr/lib/jvm/java-1.7.0-openjdk
-    fi
-
-    # The flags to ODL have the following meaning:
-    #   -of13: runs ODL using OpenFlow 1.3 protocol support.
-    #   -virt ovsdb: Runs ODL in "virtualization" mode with OVSDB support
-
-    run_process odl-server "cd $ODL_DIR/$ODL_NAME && JAVA_HOME=$JHOME bin/karaf"
-
-    # Sleep a bit to let OpenDaylight finish starting up
-    sleep $ODL_BOOT_WAIT
-}
-
-# stop_opendaylight() - Stop running processes (non-screen)
-function stop_opendaylight {
-    stop_process odl-server
-}
-
-# stop_opendaylight-compute() - Remove OVS bridges
-function stop_opendaylight-compute {
-    # remove all OVS ports that look like Neutron created ports
-    for port in $(sudo ovs-vsctl list port | grep -o -e tap[0-9a-f\-]* -e q[rg]-[0-9a-f\-]*); do
-        sudo ovs-vsctl del-port ${port}
-    done
-
-    # remove all OVS bridges created by Neutron
-    for bridge in $(sudo ovs-vsctl list-br | grep -o -e ${OVS_BRIDGE} -e ${PUBLIC_BRIDGE}); do
-        sudo ovs-vsctl del-br ${bridge}
-    done
-}
-
-# Restore xtrace
-$XTRACE
-
-# Tell emacs to use shell-script-mode
-## Local variables:
-## mode: shell-script
-## End: