============= Configuration ============= .. contents:: :local: :depth: 1 local.conf ========== DevStack configuration is modified via the file ``local.conf``. It is a modified INI format file that introduces a meta-section header to carry additional information regarding the configuration files to be changed. A sample is provided in ``devstack/samples`` The new header is similar to a normal INI section header but with double brackets (``[[ ... ]]``) and two internal fields separated by a pipe (``|``). Note that there are no spaces between the double brackets and the internal fields. Likewise, there are no spaces between the pipe and the internal fields: :: '[[' '|' ']]' where ```` is one of a set of phase names defined by ``stack.sh`` and ```` is the configuration filename. The filename is eval'ed in the ``stack.sh`` context so all environment variables are available and may be used. Using the project config file variables in the header is strongly suggested (see the ``NOVA_CONF`` example below). If the path of the config file does not exist it is skipped. The defined phases are: - **local** - extracts ``localrc`` from ``local.conf`` before ``stackrc`` is sourced - **post-config** - runs after the layer 2 services are configured and before they are started - **extra** - runs after services are started and before any files in ``extra.d`` are executed - **post-extra** - runs after files in ``extra.d`` are executed - **test-config** - runs after tempest (and plugins) are configured The file is processed strictly in sequence; meta-sections may be specified more than once but if any settings are duplicated the last to appear in the file will be used. :: [[post-config|$NOVA_CONF]] [DEFAULT] use_syslog = True [osapi_v3] enabled = False A specific meta-section ``local|localrc`` is used to provide a default ``localrc`` file (actually ``.localrc.auto``). This allows all custom settings for DevStack to be contained in a single file. If ``localrc`` exists it will be used instead to preserve backward-compatibility. :: [[local|localrc]] IPV4_ADDRS_SAFE_TO_USE=10.254.1.0/24 ADMIN_PASSWORD=speciale LOGFILE=$DEST/logs/stack.sh.log Note that ``Q_PLUGIN_CONF_FILE`` is unique in that it is assumed to *NOT* start with a ``/`` (slash) character. A slash will need to be added: :: [[post-config|/$Q_PLUGIN_CONF_FILE]] Also note that the ``localrc`` section is sourced as a shell script fragment and MUST conform to the shell requirements, specifically no whitespace around ``=`` (equals). openrc ====== ``openrc`` configures login credentials suitable for use with the OpenStack command-line tools. ``openrc`` sources ``stackrc`` at the beginning (which in turn sources the ``localrc`` section of ``local.conf``) in order to pick up ``HOST_IP`` and/or ``SERVICE_HOST`` to use in the endpoints. The values shown below are the default values. OS\_PROJECT\_NAME (OS\_TENANT\_NAME) Keystone has standardized the term *project* as the entity that owns resources. In some places references still exist to the previous term *tenant* for this use. Also, *project\_name* is preferred to *project\_id*. OS\_TENANT\_NAME remains supported for compatibility with older tools. :: OS_PROJECT_NAME=demo OS\_USERNAME In addition to the owning entity (project), OpenStack calls the entity performing the action *user*. :: OS_USERNAME=demo OS\_PASSWORD Keystone's default authentication requires a password be provided. The usual cautions about putting passwords in environment variables apply, for most DevStack uses this may be an acceptable tradeoff. :: OS_PASSWORD=secret HOST\_IP, SERVICE\_HOST Set API endpoint host using ``HOST_IP``. ``SERVICE_HOST`` may also be used to specify the endpoint, which is convenient for some ``local.conf`` configurations. Typically, ``HOST_IP`` is set in the ``localrc`` section. :: HOST_IP=127.0.0.1 SERVICE_HOST=$HOST_IP OS\_AUTH\_URL Authenticating against an OpenStack cloud using Keystone returns a *Token* and *Service Catalog*. The catalog contains the endpoints for all services the user/tenant has access to - including Nova, Glance, Keystone and Swift. :: OS_AUTH_URL=http://$SERVICE_HOST:5000/v3.0 KEYSTONECLIENT\_DEBUG, NOVACLIENT\_DEBUG Set command-line client log level to ``DEBUG``. These are commented out by default. :: # export KEYSTONECLIENT_DEBUG=1 # export NOVACLIENT_DEBUG=1 .. _minimal-configuration: Minimal Configuration ===================== While ``stack.sh`` is happy to run without a ``localrc`` section in ``local.conf``, devlife is better when there are a few minimal variables set. This is an example of a minimal configuration that touches the values that most often need to be set. - no logging - pre-set the passwords to prevent interactive prompts - move network ranges away from the local network (``IPV4_ADDRS_SAFE_TO_USE`` and ``FLOATING_RANGE``, commented out below) - set the host IP if detection is unreliable (``HOST_IP``, commented out below) :: [[local|localrc]] ADMIN_PASSWORD=secret DATABASE_PASSWORD=$ADMIN_PASSWORD RABBIT_PASSWORD=$ADMIN_PASSWORD SERVICE_PASSWORD=$ADMIN_PASSWORD #IPV4_ADDRS_SAFE_TO_USE=172.31.1.0/24 #FLOATING_RANGE=192.168.20.0/25 #HOST_IP=10.3.4.5 If the ``*_PASSWORD`` variables are not set here you will be prompted to enter values for them by ``stack.sh``. The network ranges must not overlap with any networks in use on the host. Overlap is not uncommon as RFC-1918 'private' ranges are commonly used for both the local networking and Nova's fixed and floating ranges. ``HOST_IP`` is normally detected on the first run of ``stack.sh`` but often is indeterminate on later runs due to the IP being moved from an Ethernet interface to a bridge on the host. Setting it here also makes it available for ``openrc`` to set ``OS_AUTH_URL``. ``HOST_IP`` is not set by default. ``HOST_IPV6`` is normally detected on the first run of ``stack.sh`` but will not be set if there is no IPv6 address on the default Ethernet interface. Setting it here also makes it available for ``openrc`` to set ``OS_AUTH_URL``. ``HOST_IPV6`` is not set by default. For architecture specific configurations which differ from the x86 default here, see `arch-configuration`_. Historical Notes ================ Historically DevStack obtained all local configuration and customizations from a ``localrc`` file. In Oct 2013 the ``local.conf`` configuration method was introduced (in `review 46768 `__) to simplify this process. Configuration Notes =================== .. contents:: :local: Service Repos ------------- The Git repositories used to check out the source for each service are controlled by a pair of variables set for each service. ``*_REPO`` points to the repository and ``*_BRANCH`` selects which branch to check out. These may be overridden in ``local.conf`` to pull source from a different repo for testing, such as a Gerrit branch proposal. ``GIT_BASE`` points to the primary repository server. :: NOVA_REPO=$GIT_BASE/openstack/nova.git NOVA_BRANCH=master To pull a branch directly from Gerrit, get the repo and branch from the Gerrit review page: :: git fetch https://review.openstack.org/p/openstack/nova refs/changes/50/5050/1 && git checkout FETCH_HEAD The repo is the stanza following ``fetch`` and the branch is the stanza following that: :: NOVA_REPO=https://review.openstack.org/p/openstack/nova NOVA_BRANCH=refs/changes/50/5050/1 Installation Directory ---------------------- The DevStack install directory is set by the ``DEST`` variable. By default it is ``/opt/stack``. By setting it early in the ``localrc`` section you can reference it in later variables. It can be useful to set it even though it is not changed from the default value. :: DEST=/opt/stack Logging ------- Enable Logging ~~~~~~~~~~~~~~ By default ``stack.sh`` output is only written to the console where it runs. It can be sent to a file in addition to the console by setting ``LOGFILE`` to the fully-qualified name of the destination log file. A timestamp will be appended to the given filename for each run of ``stack.sh``. :: LOGFILE=$DEST/logs/stack.sh.log Old log files are cleaned automatically if ``LOGDAYS`` is set to the number of days of old log files to keep. :: LOGDAYS=1 Some coloring is used during the DevStack runs to make it easier to see what is going on. This can be disabled with:: LOG_COLOR=False When using the logfile, by default logs are sent to the console and the file. You can set ``VERBOSE`` to ``false`` if you only wish the logs to be sent to the file (this may avoid having double-logging in some cases where you are capturing the script output and the log files). If ``VERBOSE`` is ``true`` you can additionally set ``VERBOSE_NO_TIMESTAMP`` to avoid timestamps being added to each output line sent to the console. This can be useful in some situations where the console output is being captured by a runner or framework (e.g. Ansible) that adds its own timestamps. Note that the log lines sent to the ``LOGFILE`` will still be prefixed with a timestamp. Logging the Service Output ~~~~~~~~~~~~~~~~~~~~~~~~~~ By default, services run under ``systemd`` and are natively logging to the systemd journal. To query the logs use the ``journalctl`` command, such as:: sudo journalctl --unit devstack@* More examples can be found in :ref:`journalctl-examples`. Example Logging Configuration ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ For example, non-interactive installs probably wish to save output to a file, keep service logs and disable color in the stored files. :: [[local|localrc]] DEST=/opt/stack/ LOGFILE=$LOGDIR/stack.sh.log LOG_COLOR=False Database Backend ---------------- Multiple database backends are available. The available databases are defined in the lib/databases directory. ``mysql`` is the default database, choose a different one by putting the following in the ``localrc`` section: :: disable_service mysql enable_service postgresql ``mysql`` is the default database. RPC Backend ----------- Support for a RabbitMQ RPC backend is included. Additional RPC backends may be available via external plugins. Enabling or disabling RabbitMQ is handled via the usual service functions and ``ENABLED_SERVICES``. Example disabling RabbitMQ in ``local.conf``: :: disable_service rabbit Apache Frontend --------------- The Apache web server can be enabled for wsgi services that support being deployed under HTTPD + mod_wsgi. By default, services that recommend running under HTTPD + mod_wsgi are deployed under Apache. To use an alternative deployment strategy (e.g. eventlet) for services that support an alternative to HTTPD + mod_wsgi set ``ENABLE_HTTPD_MOD_WSGI_SERVICES`` to ``False`` in your ``local.conf``. Each service that can be run under HTTPD + mod_wsgi also has an override toggle available that can be set in your ``local.conf``. Keystone is run under Apache with ``mod_wsgi`` by default. Example (Keystone) :: KEYSTONE_USE_MOD_WSGI="True" Example (Nova): :: NOVA_USE_MOD_WSGI="True" Example (Swift): :: SWIFT_USE_MOD_WSGI="True" Example (Heat): :: HEAT_USE_MOD_WSGI="True" Example (Cinder): :: CINDER_USE_MOD_WSGI="True" Libraries from Git ------------------ By default devstack installs OpenStack server components from git, however it installs client libraries from released versions on pypi. This is appropriate if you are working on server development, but if you want to see how an unreleased version of the client affects the system you can have devstack install it from upstream, or from local git trees by specifying it in ``LIBS_FROM_GIT``. Multiple libraries can be specified as a comma separated list. :: LIBS_FROM_GIT=python-keystoneclient,oslo.config Setting the variable to ``ALL`` will activate the download for all libraries. Virtual Environments -------------------- Enable the use of Python virtual environments by setting ``USE_VENV`` to ``True``. This will enable the creation of venvs for each project that is defined in the ``PROJECT_VENV`` array. Each entry in the ``PROJECT_VENV`` array contains the directory name of a venv to be used for the project. The array index is the project name. Multiple projects can use the same venv if desired. :: PROJECT_VENV["glance"]=${GLANCE_DIR}.venv ``ADDITIONAL_VENV_PACKAGES`` is a comma-separated list of additional packages to be installed into each venv. Often projects will not have certain packages listed in its ``requirements.txt`` file because they are 'optional' requirements, i.e. only needed for certain configurations. By default, the enabled databases will have their Python bindings added when they are enabled. :: ADDITIONAL_VENV_PACKAGES="python-foo, python-bar" Use python3 ------------ By default ``stack.sh`` uses python2 (the exact version set by the ``PYTHON2_VERSION``). This can be overriden so devstack will run python3 (the exact version set by ``PYTHON3_VERSION``). :: USE_PYTHON3=True A clean install every time -------------------------- By default ``stack.sh`` only clones the project repos if they do not exist in ``$DEST``. ``stack.sh`` will freshen each repo on each run if ``RECLONE`` is set to ``yes``. This avoids having to manually remove repos in order to get the current branch from ``$GIT_BASE``. :: RECLONE=yes Upgrade packages installed by pip --------------------------------- By default ``stack.sh`` only installs Python packages if no version is currently installed or the current version does not match a specified requirement. If ``PIP_UPGRADE`` is set to ``True`` then existing required Python packages will be upgraded to the most recent version that matches requirements. :: PIP_UPGRADE=True Guest Images ------------ Images provided in URLS via the comma-separated ``IMAGE_URLS`` variable will be downloaded and uploaded to glance by DevStack. Default guest-images are predefined for each type of hypervisor and their testing-requirements in ``stack.sh``. Setting ``DOWNLOAD_DEFAULT_IMAGES=False`` will prevent DevStack downloading these default images; in that case, you will want to populate ``IMAGE_URLS`` with sufficient images to satisfy testing-requirements. :: DOWNLOAD_DEFAULT_IMAGES=False IMAGE_URLS="http://foo.bar.com/image.qcow," IMAGE_URLS+="http://foo.bar.com/image2.qcow" Instance Type ------------- ``DEFAULT_INSTANCE_TYPE`` can be used to configure the default instance type. When this parameter is not specified, Devstack creates additional micro & nano flavors for really small instances to run Tempest tests. For guests with larger memory requirements, ``DEFAULT_INSTANCE_TYPE`` should be specified in the configuration file so Tempest selects the default flavors instead. KVM on Power with QEMU 2.4 requires 512 MB to load the firmware - `QEMU 2.4 - PowerPC `__ so users running instances on ppc64/ppc64le can choose one of the default created flavors as follows: :: DEFAULT_INSTANCE_TYPE=m1.tiny IP Version ---------- ``IP_VERSION`` can be used to configure Neutron to create either an IPv4, IPv6, or dual-stack self-service project data-network by with either ``IP_VERSION=4``, ``IP_VERSION=6``, or ``IP_VERSION=4+6`` respectively. :: IP_VERSION=4+6 The following optional variables can be used to alter the default IPv6 behavior: :: IPV6_RA_MODE=slaac IPV6_ADDRESS_MODE=slaac IPV6_ADDRS_SAFE_TO_USE=fd$IPV6_GLOBAL_ID::/56 IPV6_PRIVATE_NETWORK_GATEWAY=fd$IPV6_GLOBAL_ID::1 *Note*: ``IPV6_ADDRS_SAFE_TO_USE`` and ``IPV6_PRIVATE_NETWORK_GATEWAY`` can be configured with any valid IPv6 prefix. The default values make use of an auto-generated ``IPV6_GLOBAL_ID`` to comply with RFC4193. Service Version ~~~~~~~~~~~~~~~ DevStack can enable service operation over either IPv4 or IPv6 by setting ``SERVICE_IP_VERSION`` to either ``SERVICE_IP_VERSION=4`` or ``SERVICE_IP_VERSION=6`` respectively. When set to ``4`` devstack services will open listen sockets on ``0.0.0.0`` and service endpoints will be registered using ``HOST_IP`` as the address. When set to ``6`` devstack services will open listen sockets on ``::`` and service endpoints will be registered using ``HOST_IPV6`` as the address. The default value for this setting is ``4``. Dual-mode support, for example ``4+6`` is not currently supported. ``HOST_IPV6`` can optionally be used to alter the default IPv6 address :: HOST_IPV6=${some_local_ipv6_address} Multi-node setup ~~~~~~~~~~~~~~~~ See the :doc:`multi-node lab guide` Projects -------- Neutron ~~~~~~~ See the :doc:`neutron configuration guide` for details on configuration of Neutron Swift ~~~~~ Swift is disabled by default. When enabled, it is configured with only one replica to avoid being IO/memory intensive on a small VM. If you would like to enable Swift you can add this to your ``localrc`` section: :: enable_service s-proxy s-object s-container s-account If you want a minimal Swift install with only Swift and Keystone you can have this instead in your ``localrc`` section: :: disable_all_services enable_service key mysql s-proxy s-object s-container s-account If you only want to do some testing of a real normal swift cluster with multiple replicas you can do so by customizing the variable ``SWIFT_REPLICAS`` in your ``localrc`` section (usually to 3). You can manually override the ring building to use specific storage nodes, for example when you want to test a multinode environment. In this case you have to set a space-separated list of IPs in ``SWIFT_STORAGE_IPS`` in your ``localrc`` section that should be used as Swift storage nodes. Please note that this does not create a multinode setup, it is only used when adding nodes to the Swift rings. :: SWIFT_STORAGE_IPS="192.168.1.10 192.168.1.11 192.168.1.12" Swift S3 ++++++++ If you are enabling ``swift3`` in ``ENABLED_SERVICES`` DevStack will install the swift3 middleware emulation. Swift will be configured to act as a S3 endpoint for Keystone so effectively replacing the ``nova-objectstore``. Only Swift proxy server is launched in the systemd system all other services are started in background and managed by ``swift-init`` tool. Tempest ~~~~~~~ If tempest has been successfully configured, a basic set of smoke tests can be run as follows: :: $ cd /opt/stack/tempest $ tox -efull tempest.scenario.test_network_basic_ops By default tempest is downloaded and the config file is generated, but the tempest package is not installed in the system's global site-packages (the package install includes installing dependences). So tempest won't run outside of tox. If you would like to install it add the following to your ``localrc`` section: :: INSTALL_TEMPEST=True Xenserver ~~~~~~~~~ If you would like to use Xenserver as the hypervisor, please refer to the instructions in ``./tools/xen/README.md``. Cells ~~~~~ `Cells `__ is an alternative scaling option. To setup a cells environment add the following to your ``localrc`` section: :: enable_service n-cell Be aware that there are some features currently missing in cells, one notable one being security groups. Cinder ~~~~~~ The logical volume group used to hold the Cinder-managed volumes is set by ``VOLUME_GROUP_NAME``, the logical volume name prefix is set with ``VOLUME_NAME_PREFIX`` and the size of the volume backing file is set with ``VOLUME_BACKING_FILE_SIZE``. :: VOLUME_GROUP_NAME="stack-volumes" VOLUME_NAME_PREFIX="volume-" VOLUME_BACKING_FILE_SIZE=24G Keystone ~~~~~~~~ Multi-Region Setup ++++++++++++++++++ We want to setup two devstack (RegionOne and RegionTwo) with shared keystone (same users and services) and horizon. Keystone and Horizon will be located in RegionOne. Full spec is available at: ``__. In RegionOne: :: REGION_NAME=RegionOne In RegionTwo: :: disable_service horizon KEYSTONE_SERVICE_HOST= KEYSTONE_AUTH_HOST= REGION_NAME=RegionTwo KEYSTONE_REGION_NAME=RegionOne In the devstack for RegionOne, we set REGION_NAME as RegionOne, so region of the services started in this devstack are registered as RegionOne. In devstack for RegionTwo, similarly, we set REGION_NAME as RegionTwo since we want services started in this devstack to be registered in RegionTwo. But Keystone service is started and registered in RegionOne, not RegionTwo, so we use KEYSTONE_REGION_NAME to specify the region of Keystone service. KEYSTONE_REGION_NAME has a default value the same as REGION_NAME thus we omit it in the configuration of RegionOne. Disabling Identity API v2 +++++++++++++++++++++++++ The Identity API v2 is deprecated as of Mitaka and it is recommended to only use the v3 API. It is possible to setup keystone without v2 API, by doing: :: ENABLE_IDENTITY_V2=False .. _arch-configuration: Architectures ------------- The upstream CI runs exclusively on nodes with x86 architectures, but OpenStack supports even more architectures. Some of them need to configure Devstack in a certain way. KVM on s390x (IBM z Systems) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ KVM on s390x (IBM z Systems) is supported since the *Kilo* release. For an all-in-one setup, these minimal settings in the ``local.conf`` file are needed:: [[local|localrc]] ADMIN_PASSWORD=secret DATABASE_PASSWORD=$ADMIN_PASSWORD RABBIT_PASSWORD=$ADMIN_PASSWORD SERVICE_PASSWORD=$ADMIN_PASSWORD DOWNLOAD_DEFAULT_IMAGES=False IMAGE_URLS="https://cloud-images.ubuntu.com/xenial/current/xenial-server-cloudimg-s390x-disk1.img" # Provide a custom etcd3 binary download URL and ints sha256. # The binary must be located under '//etcd--linux-s390x.tar.gz' # on this URL. # Build instructions for etcd3: https://github.com/linux-on-ibm-z/docs/wiki/Building-etcd ETCD_DOWNLOAD_URL= ETCD_SHA256= enable_service n-sproxy disable_service n-novnc [[post-config|$NOVA_CONF]] [serial_console] base_url=ws://$HOST_IP:6083/ # optional Reasoning: * The default image of Devstack is x86 only, so we deactivate the download with ``DOWNLOAD_DEFAULT_IMAGES``. The referenced guest image in the code above (``IMAGE_URLS``) serves as an example. The list of possible s390x guest images is not limited to that. * This platform doesn't support a graphical console like VNC or SPICE. The technical reason is the missing framebuffer on the platform. This means we rely on the substitute feature *serial console* which needs the proxy service ``n-sproxy``. We also disable VNC's proxy ``n-novnc`` for that reason . The configuration in the ``post-config`` section is only needed if you want to use the *serial console* outside of the all-in-one setup. * A link to an etcd3 binary and its sha256 needs to be provided as the binary for s390x is not hosted on github like it is for other architectures. For more details see https://bugs.launchpad.net/devstack/+bug/1693192. Etcd3 can easily be built along https://github.com/linux-on-ibm-z/docs/wiki/Building-etcd. .. note:: To run *Tempest* against this *Devstack* all-in-one, you'll need to use a guest image which is smaller than 1GB when uncompressed. The example image from above is bigger than that!