#!/bin/bash # # lib/cinder # Install and start **Cinder** volume service # Dependencies: # # - functions # - DEST, DATA_DIR, STACK_USER must be defined # - SERVICE_{TENANT_NAME|PASSWORD} must be defined # - ``KEYSTONE_TOKEN_FORMAT`` must be defined # stack.sh # --------- # - install_cinder # - configure_cinder # - init_cinder # - start_cinder # - stop_cinder # - cleanup_cinder # Save trace setting _XTRACE_CINDER=$(set +o | grep xtrace) set +o xtrace # Defaults # -------- # set up default driver CINDER_DRIVER=${CINDER_DRIVER:-default} CINDER_PLUGINS=$TOP_DIR/lib/cinder_plugins CINDER_BACKENDS=$TOP_DIR/lib/cinder_backends # grab plugin config if specified via cinder_driver if [[ -r $CINDER_PLUGINS/$CINDER_DRIVER ]]; then source $CINDER_PLUGINS/$CINDER_DRIVER fi # set up default directories GITDIR["python-cinderclient"]=$DEST/python-cinderclient GITDIR["python-brick-cinderclient-ext"]=$DEST/python-brick-cinderclient-ext CINDER_DIR=$DEST/cinder # Cinder virtual environment if [[ ${USE_VENV} = True ]]; then PROJECT_VENV["cinder"]=${CINDER_DIR}.venv CINDER_BIN_DIR=${PROJECT_VENV["cinder"]}/bin else CINDER_BIN_DIR=$(get_python_exec_prefix) fi CINDER_STATE_PATH=${CINDER_STATE_PATH:=$DATA_DIR/cinder} CINDER_CONF_DIR=/etc/cinder CINDER_CONF=$CINDER_CONF_DIR/cinder.conf CINDER_UWSGI=$CINDER_BIN_DIR/cinder-wsgi CINDER_UWSGI_CONF=$CINDER_CONF_DIR/cinder-api-uwsgi.ini CINDER_API_PASTE_INI=$CINDER_CONF_DIR/api-paste.ini # Public facing bits if is_service_enabled tls-proxy; then CINDER_SERVICE_PROTOCOL="https" fi CINDER_SERVICE_HOST=${CINDER_SERVICE_HOST:-$SERVICE_HOST} CINDER_SERVICE_PORT=${CINDER_SERVICE_PORT:-8776} CINDER_SERVICE_PORT_INT=${CINDER_SERVICE_PORT_INT:-18776} CINDER_SERVICE_PROTOCOL=${CINDER_SERVICE_PROTOCOL:-$SERVICE_PROTOCOL} CINDER_SERVICE_LISTEN_ADDRESS=${CINDER_SERVICE_LISTEN_ADDRESS:-$(ipv6_unquote $SERVICE_LISTEN_ADDRESS)} # What type of LVM device should Cinder use for LVM backend # Defaults to auto, which will do thin provisioning if it's a fresh # volume group, otherwise it will do thick. The other valid choices are # default, which is thick, or thin, which as the name implies utilizes lvm # thin provisioning. CINDER_LVM_TYPE=${CINDER_LVM_TYPE:-auto} # Default backends # The backend format is type:name where type is one of the supported backend # types (lvm, nfs, etc) and name is the identifier used in the Cinder # configuration and for the volume type name. Multiple backends are # comma-separated. # The old ``CINDER_MULTI_LVM_BACKEND=True`` setting had a default of: # CINDER_ENABLED_BACKENDS=${CINDER_ENABLED_BACKENDS:-lvm:lvmdriver-1,lvm:lvmdriver-2} CINDER_ENABLED_BACKENDS=${CINDER_ENABLED_BACKENDS:-lvm:lvmdriver-1} CINDER_VOLUME_CLEAR=${CINDER_VOLUME_CLEAR:-${CINDER_VOLUME_CLEAR_DEFAULT:-zero}} CINDER_VOLUME_CLEAR=$(echo ${CINDER_VOLUME_CLEAR} | tr '[:upper:]' '[:lower:]') # Centos7 and OpenSUSE switched to using LIO and that's all that's supported, # although the tgt bits are in EPEL and OpenSUSE we don't want that for CI if is_fedora || is_suse; then CINDER_ISCSI_HELPER=${CINDER_ISCSI_HELPER:-lioadm} if [[ ${CINDER_ISCSI_HELPER} != "lioadm" ]]; then die "lioadm is the only valid Cinder target_helper config on this platform" fi else CINDER_ISCSI_HELPER=${CINDER_ISCSI_HELPER:-tgtadm} fi # Toggle for deploying Cinder under a wsgi server. Legacy mod_wsgi # reference should be cleaned up to more accurately refer to uwsgi. CINDER_USE_MOD_WSGI=${CINDER_USE_MOD_WSGI:-True} # Source the enabled backends if is_service_enabled c-vol && [[ -n "$CINDER_ENABLED_BACKENDS" ]]; then for be in ${CINDER_ENABLED_BACKENDS//,/ }; do be_type=${be%%:*} be_name=${be##*:} if [[ -r $CINDER_BACKENDS/${be_type} ]]; then source $CINDER_BACKENDS/${be_type} fi done fi # Environment variables to configure the image-volume cache CINDER_IMG_CACHE_ENABLED=${CINDER_IMG_CACHE_ENABLED:-True} # For limits, if left unset, it will use cinder defaults of 0 for unlimited CINDER_IMG_CACHE_SIZE_GB=${CINDER_IMG_CACHE_SIZE_GB:-} CINDER_IMG_CACHE_SIZE_COUNT=${CINDER_IMG_CACHE_SIZE_COUNT:-} # Configure which cinder backends will have the image-volume cache, this takes the same # form as the CINDER_ENABLED_BACKENDS config option. By default it will # enable the cache for all cinder backends. CINDER_CACHE_ENABLED_FOR_BACKENDS=${CINDER_CACHE_ENABLED_FOR_BACKENDS:-$CINDER_ENABLED_BACKENDS} # Functions # --------- # Test if any Cinder services are enabled # is_cinder_enabled function is_cinder_enabled { [[ ,${DISABLED_SERVICES} =~ ,"cinder" ]] && return 1 [[ ,${ENABLED_SERVICES} =~ ,"c-" ]] && return 0 return 1 } # _cinder_cleanup_apache_wsgi() - Remove wsgi files, disable and remove apache vhost file function _cinder_cleanup_apache_wsgi { sudo rm -f $(apache_site_config_for osapi-volume) } # cleanup_cinder() - Remove residual data files, anything left over from previous # runs that a clean run would need to clean up function cleanup_cinder { # ensure the volume group is cleared up because fails might # leave dead volumes in the group if [ "$CINDER_ISCSI_HELPER" = "tgtadm" ]; then local targets targets=$(sudo tgtadm --op show --mode target) if [ $? -ne 0 ]; then # If tgt driver isn't running this won't work obviously # So check the response and restart if need be echo "tgtd seems to be in a bad state, restarting..." if is_ubuntu; then restart_service tgt else restart_service tgtd fi targets=$(sudo tgtadm --op show --mode target) fi if [[ -n "$targets" ]]; then local iqn_list=( $(grep --no-filename -r iqn $SCSI_PERSIST_DIR | sed 's///') ) for i in "${iqn_list[@]}"; do echo removing iSCSI target: $i sudo tgt-admin --delete $i done fi if is_ubuntu; then stop_service tgt else stop_service tgtd fi else sudo cinder-rtstool get-targets | sudo xargs -rn 1 cinder-rtstool delete fi if is_service_enabled c-vol && [[ -n "$CINDER_ENABLED_BACKENDS" ]]; then local be be_name be_type for be in ${CINDER_ENABLED_BACKENDS//,/ }; do be_type=${be%%:*} be_name=${be##*:} if type cleanup_cinder_backend_${be_type} >/dev/null 2>&1; then cleanup_cinder_backend_${be_type} ${be_name} fi done fi stop_process "c-api" remove_uwsgi_config "$CINDER_UWSGI_CONF" "$CINDER_UWSGI" } # configure_cinder() - Set config files, create data dirs, etc function configure_cinder { sudo install -d -o $STACK_USER -m 755 $CINDER_CONF_DIR rm -f $CINDER_CONF configure_rootwrap cinder if [[ -f "$CINDER_DIR/etc/cinder/resource_filters.json" ]]; then cp -p "$CINDER_DIR/etc/cinder/resource_filters.json" "$CINDER_CONF_DIR/resource_filters.json" fi cp $CINDER_DIR/etc/cinder/api-paste.ini $CINDER_API_PASTE_INI inicomment $CINDER_API_PASTE_INI filter:authtoken auth_host inicomment $CINDER_API_PASTE_INI filter:authtoken auth_port inicomment $CINDER_API_PASTE_INI filter:authtoken auth_protocol inicomment $CINDER_API_PASTE_INI filter:authtoken cafile inicomment $CINDER_API_PASTE_INI filter:authtoken admin_tenant_name inicomment $CINDER_API_PASTE_INI filter:authtoken admin_user inicomment $CINDER_API_PASTE_INI filter:authtoken admin_password inicomment $CINDER_API_PASTE_INI filter:authtoken signing_dir configure_keystone_authtoken_middleware $CINDER_CONF cinder iniset $CINDER_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL iniset $CINDER_CONF DEFAULT target_helper "$CINDER_ISCSI_HELPER" iniset $CINDER_CONF database connection `database_connection_url cinder` iniset $CINDER_CONF DEFAULT api_paste_config $CINDER_API_PASTE_INI iniset $CINDER_CONF DEFAULT rootwrap_config "$CINDER_CONF_DIR/rootwrap.conf" iniset $CINDER_CONF DEFAULT osapi_volume_extension cinder.api.contrib.standard_extensions iniset $CINDER_CONF DEFAULT osapi_volume_listen $CINDER_SERVICE_LISTEN_ADDRESS iniset $CINDER_CONF DEFAULT state_path $CINDER_STATE_PATH iniset $CINDER_CONF oslo_concurrency lock_path $CINDER_STATE_PATH if [[ $SERVICE_IP_VERSION == 6 ]]; then iniset $CINDER_CONF DEFAULT my_ip "$HOST_IPV6" else iniset $CINDER_CONF DEFAULT my_ip "$HOST_IP" fi iniset $CINDER_CONF key_manager backend cinder.keymgr.conf_key_mgr.ConfKeyManager iniset $CINDER_CONF key_manager fixed_key $(openssl rand -hex 16) if is_service_enabled c-vol && [[ -n "$CINDER_ENABLED_BACKENDS" ]]; then local enabled_backends="" local default_name="" local be be_name be_type for be in ${CINDER_ENABLED_BACKENDS//,/ }; do be_type=${be%%:*} be_name=${be##*:} if type configure_cinder_backend_${be_type} >/dev/null 2>&1; then configure_cinder_backend_${be_type} ${be_name} fi if [[ -z "$default_name" ]]; then default_name=$be_name fi enabled_backends+=$be_name, iniset $CINDER_CONF $be_name volume_clear $CINDER_VOLUME_CLEAR done iniset $CINDER_CONF DEFAULT enabled_backends ${enabled_backends%,*} if [[ -n "$default_name" ]]; then iniset $CINDER_CONF DEFAULT default_volume_type ${default_name} fi configure_cinder_image_volume_cache fi if is_service_enabled c-bak; then # NOTE(mriedem): The default backup driver uses swift and if we're # on a subnode we might not know if swift is enabled, but chances are # good that it is on the controller so configure the backup service # to use it. If we want to configure the backup service to use # a non-swift driver, we'll likely need environment variables. iniset $CINDER_CONF DEFAULT backup_swift_url "$SWIFT_SERVICE_PROTOCOL://$SERVICE_HOST:$SWIFT_DEFAULT_BIND_PORT/v1/AUTH_" fi if is_service_enabled ceilometer; then iniset $CINDER_CONF oslo_messaging_notifications driver "messagingv2" fi if is_service_enabled tls-proxy; then if [[ "$ENABLED_SERVICES" =~ "c-api" ]]; then # Set the service port for a proxy to take the original if [ "$CINDER_USE_MOD_WSGI" == "True" ]; then iniset $CINDER_CONF DEFAULT osapi_volume_listen_port $CINDER_SERVICE_PORT_INT iniset $CINDER_CONF oslo_middleware enable_proxy_headers_parsing True else iniset $CINDER_CONF DEFAULT osapi_volume_listen_port $CINDER_SERVICE_PORT_INT iniset $CINDER_CONF DEFAULT public_endpoint $CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT iniset $CINDER_CONF DEFAULT osapi_volume_base_URL $CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT fi fi fi if [ "$SYSLOG" != "False" ]; then iniset $CINDER_CONF DEFAULT use_syslog True fi iniset_rpc_backend cinder $CINDER_CONF # Format logging setup_logging $CINDER_CONF $CINDER_USE_MOD_WSGI write_uwsgi_config "$CINDER_UWSGI_CONF" "$CINDER_UWSGI" "/volume" if [[ -r $CINDER_PLUGINS/$CINDER_DRIVER ]]; then configure_cinder_driver fi iniset $CINDER_CONF DEFAULT osapi_volume_workers "$API_WORKERS" iniset $CINDER_CONF DEFAULT glance_api_servers "$GLANCE_URL" if is_service_enabled tls-proxy; then iniset $CINDER_CONF DEFAULT glance_protocol https iniset $CINDER_CONF DEFAULT glance_ca_certificates_file $SSL_BUNDLE_FILE fi if [ "$GLANCE_V1_ENABLED" != "True" ]; then iniset $CINDER_CONF DEFAULT glance_api_version 2 fi # Set nova credentials (used for os-assisted-snapshots) configure_keystone_authtoken_middleware $CINDER_CONF nova nova iniset $CINDER_CONF nova region_name "$REGION_NAME" iniset $CINDER_CONF DEFAULT graceful_shutdown_timeout "$SERVICE_GRACEFUL_SHUTDOWN_TIMEOUT" if [[ ! -z "$CINDER_COORDINATION_URL" ]]; then iniset $CINDER_CONF coordination backend_url "$CINDER_COORDINATION_URL" elif is_service_enabled etcd3; then iniset $CINDER_CONF coordination backend_url "etcd3+http://${SERVICE_HOST}:$ETCD_PORT" fi } # create_cinder_accounts() - Set up common required cinder accounts # Tenant User Roles # ------------------------------------------------------------------ # service cinder admin # if enabled # Migrated from keystone_data.sh function create_cinder_accounts { # Cinder if [[ "$ENABLED_SERVICES" =~ "c-api" ]]; then create_service_user "cinder" # block-storage is the official service type get_or_create_service "cinder" "block-storage" "Cinder Volume Service" if [ "$CINDER_USE_MOD_WSGI" == "False" ]; then get_or_create_endpoint \ "block-storage" \ "$REGION_NAME" \ "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v3/\$(project_id)s" get_or_create_service "cinderv2" "volumev2" "Cinder Volume Service V2" get_or_create_endpoint \ "volumev2" \ "$REGION_NAME" \ "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v2/\$(project_id)s" get_or_create_service "cinderv3" "volumev3" "Cinder Volume Service V3" get_or_create_endpoint \ "volumev3" \ "$REGION_NAME" \ "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v3/\$(project_id)s" else get_or_create_endpoint \ "block-storage" \ "$REGION_NAME" \ "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST/volume/v3/\$(project_id)s" get_or_create_service "cinderv2" "volumev2" "Cinder Volume Service V2" get_or_create_endpoint \ "volumev2" \ "$REGION_NAME" \ "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST/volume/v2/\$(project_id)s" get_or_create_service "cinderv3" "volumev3" "Cinder Volume Service V3" get_or_create_endpoint \ "volumev3" \ "$REGION_NAME" \ "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST/volume/v3/\$(project_id)s" fi configure_cinder_internal_tenant fi } # init_cinder() - Initialize database and volume group function init_cinder { if is_service_enabled $DATABASE_BACKENDS; then # (Re)create cinder database recreate_database cinder time_start "dbsync" # Migrate cinder database $CINDER_BIN_DIR/cinder-manage --config-file $CINDER_CONF db sync time_stop "dbsync" fi if is_service_enabled c-vol && [[ -n "$CINDER_ENABLED_BACKENDS" ]]; then local be be_name be_type for be in ${CINDER_ENABLED_BACKENDS//,/ }; do be_type=${be%%:*} be_name=${be##*:} if type init_cinder_backend_${be_type} >/dev/null 2>&1; then # Always init the default volume group for lvm. if [[ "$be_type" == "lvm" ]]; then init_default_lvm_volume_group fi init_cinder_backend_${be_type} ${be_name} fi done fi mkdir -p $CINDER_STATE_PATH/volumes } # install_cinder() - Collect source and prepare function install_cinder { git_clone $CINDER_REPO $CINDER_DIR $CINDER_BRANCH setup_develop $CINDER_DIR if [[ "$CINDER_ISCSI_HELPER" == "tgtadm" ]]; then install_package tgt elif [[ "$CINDER_ISCSI_HELPER" == "lioadm" ]]; then if is_ubuntu; then # TODO(frickler): Workaround for https://launchpad.net/bugs/1819819 sudo mkdir -p /etc/target install_package targetcli-fb else install_package targetcli fi fi } # install_cinderclient() - Collect source and prepare function install_cinderclient { if use_library_from_git "python-brick-cinderclient-ext"; then git_clone_by_name "python-brick-cinderclient-ext" setup_dev_lib "python-brick-cinderclient-ext" fi if use_library_from_git "python-cinderclient"; then git_clone_by_name "python-cinderclient" setup_dev_lib "python-cinderclient" sudo install -D -m 0644 -o $STACK_USER {${GITDIR["python-cinderclient"]}/tools/,/etc/bash_completion.d/}cinder.bash_completion fi } # apply config.d approach for cinder volumes directory function _configure_tgt_for_config_d { if [[ ! -d /etc/tgt/stack.d/ ]]; then sudo ln -sf $CINDER_STATE_PATH/volumes /etc/tgt/stack.d fi if ! grep -q "include /etc/tgt/stack.d/*" /etc/tgt/targets.conf; then echo "include /etc/tgt/stack.d/*" | sudo tee -a /etc/tgt/targets.conf fi } # start_cinder() - Start running processes function start_cinder { local service_port=$CINDER_SERVICE_PORT local service_protocol=$CINDER_SERVICE_PROTOCOL local cinder_url if is_service_enabled tls-proxy && [ "$CINDER_USE_MOD_WSGI" == "False" ]; then service_port=$CINDER_SERVICE_PORT_INT service_protocol="http" fi if [ "$CINDER_ISCSI_HELPER" = "tgtadm" ]; then if is_service_enabled c-vol; then # Delete any old stack.conf sudo rm -f /etc/tgt/conf.d/stack.conf _configure_tgt_for_config_d if is_ubuntu; then sudo service tgt restart elif is_suse; then # NOTE(dmllr): workaround restart bug # https://bugzilla.suse.com/show_bug.cgi?id=934642 stop_service tgtd start_service tgtd else restart_service tgtd fi # NOTE(gfidente): ensure tgtd is running in debug mode sudo tgtadm --mode system --op update --name debug --value on fi fi if [[ "$ENABLED_SERVICES" =~ "c-api" ]]; then if [ "$CINDER_USE_MOD_WSGI" == "False" ]; then run_process c-api "$CINDER_BIN_DIR/cinder-api --config-file $CINDER_CONF" cinder_url=$service_protocol://$SERVICE_HOST:$service_port # Start proxy if tls enabled if is_service_enabled tls-proxy; then start_tls_proxy cinder '*' $CINDER_SERVICE_PORT $CINDER_SERVICE_HOST $CINDER_SERVICE_PORT_INT fi else run_process "c-api" "$(which uwsgi) --procname-prefix cinder-api --ini $CINDER_UWSGI_CONF" cinder_url=$service_protocol://$SERVICE_HOST/volume/v3 fi fi echo "Waiting for Cinder API to start..." if ! wait_for_service $SERVICE_TIMEOUT $cinder_url; then die $LINENO "c-api did not start" fi run_process c-sch "$CINDER_BIN_DIR/cinder-scheduler --config-file $CINDER_CONF" run_process c-bak "$CINDER_BIN_DIR/cinder-backup --config-file $CINDER_CONF" run_process c-vol "$CINDER_BIN_DIR/cinder-volume --config-file $CINDER_CONF" # NOTE(jdg): For cinder, startup order matters. To ensure that repor_capabilities is received # by the scheduler start the cinder-volume service last (or restart it) after the scheduler # has started. This is a quick fix for lp bug/1189595 } # stop_cinder() - Stop running processes function stop_cinder { stop_process c-api stop_process c-bak stop_process c-sch stop_process c-vol } # create_volume_types() - Create Cinder's configured volume types function create_volume_types { # Create volume types if is_service_enabled c-api && [[ -n "$CINDER_ENABLED_BACKENDS" ]]; then local be be_name for be in ${CINDER_ENABLED_BACKENDS//,/ }; do be_name=${be##*:} # NOTE (e0ne): openstack client doesn't work with cinder in noauth mode if is_service_enabled keystone; then openstack --os-region-name="$REGION_NAME" volume type create --property volume_backend_name="${be_name}" ${be_name} else # TODO (e0ne): use openstack client once it will support cinder in noauth mode: # https://bugs.launchpad.net/python-cinderclient/+bug/1755279 local cinder_url cinder_url=$CINDER_SERVICE_PROTOCOL://$SERVICE_HOST:$CINDER_SERVICE_PORT/v3 OS_USER_ID=$OS_USERNAME OS_PROJECT_ID=$OS_PROJECT_NAME cinder --os-auth-type noauth --os-endpoint=$cinder_url type-create ${be_name} OS_USER_ID=$OS_USERNAME OS_PROJECT_ID=$OS_PROJECT_NAME cinder --os-auth-type noauth --os-endpoint=$cinder_url type-key ${be_name} set volume_backend_name=${be_name} fi done fi } # Compatibility for Grenade function create_cinder_volume_group { # During a transition period Grenade needs to have this function defined # It is effectively a no-op in the Grenade 'target' use case : } function configure_cinder_internal_tenant { # Re-use the Cinder service account for simplicity. iniset $CINDER_CONF DEFAULT cinder_internal_tenant_project_id $(get_or_create_project $SERVICE_PROJECT_NAME) iniset $CINDER_CONF DEFAULT cinder_internal_tenant_user_id $(get_or_create_user "cinder") } function configure_cinder_image_volume_cache { # Expect CINDER_CACHE_ENABLED_FOR_BACKENDS to be a list of backends # similar to CINDER_ENABLED_BACKENDS with NAME:TYPE where NAME will # be the backend specific configuration stanza in cinder.conf. for be in ${CINDER_CACHE_ENABLED_FOR_BACKENDS//,/ }; do local be_name=${be##*:} iniset $CINDER_CONF $be_name image_volume_cache_enabled $CINDER_IMG_CACHE_ENABLED if [[ -n $CINDER_IMG_CACHE_SIZE_GB ]]; then iniset $CINDER_CONF $be_name image_volume_cache_max_size_gb $CINDER_IMG_CACHE_SIZE_GB fi if [[ -n $CINDER_IMG_CACHE_SIZE_COUNT ]]; then iniset $CINDER_CONF $be_name image_volume_cache_max_count $CINDER_IMG_CACHE_SIZE_COUNT fi done } # Restore xtrace $_XTRACE_CINDER # Tell emacs to use shell-script-mode ## Local variables: ## mode: shell-script ## End: