#!/bin/bash # # lib/apache # Functions to control configuration and operation of apache web server # Dependencies: # # - ``functions`` file # - ``STACK_USER`` must be defined # # lib/apache exports the following functions: # # - install_apache_wsgi # - apache_site_config_for # - enable_apache_site # - disable_apache_site # - start_apache_server # - stop_apache_server # - restart_apache_server # Save trace setting _XTRACE_LIB_APACHE=$(set +o | grep xtrace) set +o xtrace # Allow overriding the default Apache user and group, default to # current user and his default group. APACHE_USER=${APACHE_USER:-$STACK_USER} APACHE_GROUP=${APACHE_GROUP:-$(id -gn $APACHE_USER)} APACHE_LOCAL_HOST=$SERVICE_LOCAL_HOST if [[ "$SERVICE_IP_VERSION" == 6 ]]; then APACHE_LOCAL_HOST=[$APACHE_LOCAL_HOST] fi # Set up apache name and configuration directory # Note that APACHE_CONF_DIR is really more accurately apache's vhost # configuration dir but we can't just change this because public interfaces. if is_ubuntu; then APACHE_NAME=apache2 APACHE_CONF_DIR=${APACHE_CONF_DIR:-/etc/$APACHE_NAME/sites-available} APACHE_SETTINGS_DIR=${APACHE_SETTINGS_DIR:-/etc/$APACHE_NAME/conf-enabled} elif is_fedora; then APACHE_NAME=httpd APACHE_CONF_DIR=${APACHE_CONF_DIR:-/etc/$APACHE_NAME/conf.d} APACHE_SETTINGS_DIR=${APACHE_SETTINGS_DIR:-/etc/$APACHE_NAME/conf.d} elif is_suse; then APACHE_NAME=apache2 APACHE_CONF_DIR=${APACHE_CONF_DIR:-/etc/$APACHE_NAME/vhosts.d} APACHE_SETTINGS_DIR=${APACHE_SETTINGS_DIR:-/etc/$APACHE_NAME/conf.d} fi APACHE_LOG_DIR="/var/log/${APACHE_NAME}" # Functions # --------- # Enable apache mod and restart apache if it isn't already enabled. function enable_apache_mod { local mod=$1 # Apache installation, because we mark it NOPRIME if is_ubuntu; then # Skip mod_version as it is not a valid mod to enable # on debuntu, instead it is built in. if [[ "$mod" != "version" ]] && ! a2query -m $mod ; then sudo a2enmod $mod restart_apache_server fi elif is_suse; then if ! a2enmod -q $mod ; then sudo a2enmod $mod restart_apache_server fi elif is_fedora; then # pass true else exit_distro_not_supported "apache enable mod" fi } # NOTE(sdague): Install uwsgi including apache module, we need to get # to 2.0.6+ to get a working mod_proxy_uwsgi. We can probably build a # check for that and do it differently for different platforms. function install_apache_uwsgi { local apxs="apxs2" if is_fedora; then apxs="apxs" fi if is_ubuntu; then local pkg_list="uwsgi uwsgi-plugin-python3 libapache2-mod-proxy-uwsgi" install_package ${pkg_list} # NOTE(ianw) 2022-02-03 : Fedora 35 needs to skip this and fall # into the install-from-source because the upstream packages # didn't fix Python 3.10 compatibility before release. Should be # fixed in uwsgi 4.9.0; can remove this when packages available # or we drop this release elif is_fedora && ! [[ $DISTRO =~ f36 ]]; then # Note httpd comes with mod_proxy_uwsgi and it is loaded by # default; the mod_proxy_uwsgi package actually conflicts now. # See: # https://bugzilla.redhat.com/show_bug.cgi?id=1574335 # # Thus there is nothing else to do after this install install_package uwsgi \ uwsgi-plugin-python3 elif [[ $os_VENDOR =~ openSUSE ]]; then install_package uwsgi \ uwsgi-python3 \ apache2-mod_uwsgi else # Compile uwsgi from source. local dir dir=$(mktemp -d) pushd $dir pip_install uwsgi pip download uwsgi -c $REQUIREMENTS_DIR/upper-constraints.txt local uwsgi uwsgi=$(ls uwsgi*) tar xvf $uwsgi cd uwsgi*/apache2 sudo $apxs -i -c mod_proxy_uwsgi.c popd # delete the temp directory sudo rm -rf $dir fi if is_ubuntu || is_suse ; then # we've got to enable proxy and proxy_uwsgi for this to work sudo a2enmod proxy sudo a2enmod proxy_uwsgi elif is_fedora; then # redhat is missing a nice way to turn on/off modules echo "LoadModule proxy_uwsgi_module modules/mod_proxy_uwsgi.so" \ | sudo tee /etc/httpd/conf.modules.d/02-proxy-uwsgi.conf fi restart_apache_server } # install_apache_wsgi() - Install Apache server and wsgi module function install_apache_wsgi { # Apache installation, because we mark it NOPRIME if is_ubuntu; then # Install apache2, which is NOPRIME'd install_package apache2 if is_package_installed libapache2-mod-wsgi; then uninstall_package libapache2-mod-wsgi fi install_package libapache2-mod-wsgi-py3 elif is_fedora; then sudo rm -f /etc/httpd/conf.d/000-* install_package httpd python3-mod_wsgi # For consistency with Ubuntu, switch to the worker mpm, as # the default is event sudo sed -i '/mod_mpm_prefork.so/s/^/#/g' /etc/httpd/conf.modules.d/00-mpm.conf sudo sed -i '/mod_mpm_event.so/s/^/#/g' /etc/httpd/conf.modules.d/00-mpm.conf sudo sed -i '/mod_mpm_worker.so/s/^#//g' /etc/httpd/conf.modules.d/00-mpm.conf elif is_suse; then install_package apache2 apache2-mod_wsgi else exit_distro_not_supported "apache wsgi installation" fi # WSGI isn't enabled by default, enable it enable_apache_mod wsgi } # apache_site_config_for() - The filename of the site's configuration file. # This function uses the global variables APACHE_NAME and APACHE_CONF_DIR. # # On Ubuntu 14.04+, the site configuration file must have a .conf suffix for a2ensite and a2dissite to # recognise it. a2ensite and a2dissite ignore the .conf suffix used as parameter. The default sites' # files are 000-default.conf and default-ssl.conf. # # On Fedora and openSUSE, any file in /etc/httpd/conf.d/ whose name ends with .conf is enabled. # # On RHEL and CentOS, things should hopefully work as in Fedora. # # The table below summarizes what should happen on each distribution: # +----------------------+--------------------+--------------------------+--------------------------+ # | Distribution | File name | Site enabling command | Site disabling command | # +----------------------+--------------------+--------------------------+--------------------------+ # | Ubuntu 14.04 | site.conf | a2ensite site | a2dissite site | # | Fedora, RHEL, CentOS | site.conf.disabled | mv site.conf{.disabled,} | mv site.conf{,.disabled} | # +----------------------+--------------------+--------------------------+--------------------------+ function apache_site_config_for { local site=$@ if is_ubuntu; then # Ubuntu 14.04 - Apache 2.4 echo $APACHE_CONF_DIR/${site}.conf elif is_fedora || is_suse; then # fedora conf.d is only imported if it ends with .conf so this is approx the same local enabled_site_file="$APACHE_CONF_DIR/${site}.conf" if [ -f $enabled_site_file ]; then echo ${enabled_site_file} else echo ${enabled_site_file}.disabled fi fi } # enable_apache_site() - Enable a particular apache site function enable_apache_site { local site=$@ # Many of our sites use mod version. Just enable it. enable_apache_mod version if is_ubuntu; then sudo a2ensite ${site} elif is_fedora || is_suse; then local enabled_site_file="$APACHE_CONF_DIR/${site}.conf" # Do nothing if site already enabled or no site config exists if [[ -f ${enabled_site_file}.disabled ]] && [[ ! -f ${enabled_site_file} ]]; then sudo mv ${enabled_site_file}.disabled ${enabled_site_file} fi fi } # disable_apache_site() - Disable a particular apache site function disable_apache_site { local site=$@ if is_ubuntu; then sudo a2dissite ${site} || true elif is_fedora || is_suse; then local enabled_site_file="$APACHE_CONF_DIR/${site}.conf" # Do nothing if no site config exists if [[ -f ${enabled_site_file} ]]; then sudo mv ${enabled_site_file} ${enabled_site_file}.disabled fi fi } # start_apache_server() - Start running apache server function start_apache_server { start_service $APACHE_NAME } # stop_apache_server() - Stop running apache server function stop_apache_server { if [ -n "$APACHE_NAME" ]; then stop_service $APACHE_NAME else exit_distro_not_supported "apache configuration" fi } # restart_apache_server function restart_apache_server { # Apache can be slow to stop, doing an explicit stop, sleep, start helps # to mitigate issues where apache will claim a port it's listening on is # still in use and fail to start. restart_service $APACHE_NAME } function write_uwsgi_config { local file=$1 local wsgi=$2 local url=$3 local http=$4 local name="" name=$(basename $wsgi) # create a home for the sockets; note don't use /tmp -- apache has # a private view of it on some platforms. local socket_dir='/var/run/uwsgi' # /var/run will be empty on ubuntu after reboot, so we can use systemd-temptiles # to automatically create $socket_dir. sudo mkdir -p /etc/tmpfiles.d/ echo "d $socket_dir 0755 $STACK_USER root" | sudo tee /etc/tmpfiles.d/uwsgi.conf sudo systemd-tmpfiles --create /etc/tmpfiles.d/uwsgi.conf local socket="$socket_dir/${name}.socket" # always cleanup given that we are using iniset here rm -rf $file iniset "$file" uwsgi wsgi-file "$wsgi" iniset "$file" uwsgi processes $API_WORKERS # This is running standalone iniset "$file" uwsgi master true # Set die-on-term & exit-on-reload so that uwsgi shuts down iniset "$file" uwsgi die-on-term true iniset "$file" uwsgi exit-on-reload false # Set worker-reload-mercy so that worker will not exit till the time # configured after graceful shutdown iniset "$file" uwsgi worker-reload-mercy $WORKER_TIMEOUT iniset "$file" uwsgi enable-threads true iniset "$file" uwsgi plugins http,python3 # uwsgi recommends this to prevent thundering herd on accept. iniset "$file" uwsgi thunder-lock true # Set hook to trigger graceful shutdown on SIGTERM iniset "$file" uwsgi hook-master-start "unix_signal:15 gracefully_kill_them_all" # Override the default size for headers from the 4k default. iniset "$file" uwsgi buffer-size 65535 # Make sure the client doesn't try to re-use the connection. iniset "$file" uwsgi add-header "Connection: close" # This ensures that file descriptors aren't shared between processes. iniset "$file" uwsgi lazy-apps true # If we said bind directly to http, then do that and don't start the apache proxy if [[ -n "$http" ]]; then iniset "$file" uwsgi http $http else local apache_conf="" apache_conf=$(apache_site_config_for $name) iniset "$file" uwsgi socket "$socket" iniset "$file" uwsgi chmod-socket 666 echo "ProxyPass \"${url}\" \"unix:${socket}|uwsgi://uwsgi-uds-${name}\" retry=0 " | sudo tee -a $apache_conf enable_apache_site $name restart_apache_server fi } # For services using chunked encoding, the only services known to use this # currently are Glance and Swift, we need to use an http proxy instead of # mod_proxy_uwsgi because the chunked encoding gets dropped. See: # https://github.com/unbit/uwsgi/issues/1540 You can workaround this on python2 # but that involves having apache buffer the request before sending it to # uwsgi. function write_local_uwsgi_http_config { local file=$1 local wsgi=$2 local url=$3 name=$(basename $wsgi) # create a home for the sockets; note don't use /tmp -- apache has # a private view of it on some platforms. # always cleanup given that we are using iniset here rm -rf $file iniset "$file" uwsgi wsgi-file "$wsgi" port=$(get_random_port) iniset "$file" uwsgi http-socket "$APACHE_LOCAL_HOST:$port" iniset "$file" uwsgi processes $API_WORKERS # This is running standalone iniset "$file" uwsgi master true # Set die-on-term & exit-on-reload so that uwsgi shuts down iniset "$file" uwsgi die-on-term true iniset "$file" uwsgi exit-on-reload false iniset "$file" uwsgi enable-threads true iniset "$file" uwsgi plugins http,python3 # uwsgi recommends this to prevent thundering herd on accept. iniset "$file" uwsgi thunder-lock true # Set hook to trigger graceful shutdown on SIGTERM iniset "$file" uwsgi hook-master-start "unix_signal:15 gracefully_kill_them_all" # Set worker-reload-mercy so that worker will not exit till the time # configured after graceful shutdown iniset "$file" uwsgi worker-reload-mercy $WORKER_TIMEOUT # Override the default size for headers from the 4k default. iniset "$file" uwsgi buffer-size 65535 # Make sure the client doesn't try to re-use the connection. iniset "$file" uwsgi add-header "Connection: close" # This ensures that file descriptors aren't shared between processes. iniset "$file" uwsgi lazy-apps true iniset "$file" uwsgi chmod-socket 666 iniset "$file" uwsgi http-raw-body true iniset "$file" uwsgi http-chunked-input true iniset "$file" uwsgi http-auto-chunked true iniset "$file" uwsgi http-keepalive false # Increase socket timeout for slow chunked uploads iniset "$file" uwsgi socket-timeout 30 enable_apache_mod proxy enable_apache_mod proxy_http local apache_conf="" apache_conf=$(apache_site_config_for $name) echo "KeepAlive Off" | sudo tee $apache_conf echo "SetEnv proxy-sendchunked 1" | sudo tee -a $apache_conf echo "ProxyPass \"${url}\" \"http://$APACHE_LOCAL_HOST:$port\" retry=0 " | sudo tee -a $apache_conf enable_apache_site $name restart_apache_server } # Write a straight-through proxy for a service that runs locally and just needs # to be reachable via the main http proxy at $loc function write_local_proxy_http_config { local name=$1 local url=$2 local loc=$3 local apache_conf apache_conf=$(apache_site_config_for $name) enable_apache_mod proxy enable_apache_mod proxy_http echo "KeepAlive Off" | sudo tee $apache_conf echo "SetEnv proxy-sendchunked 1" | sudo tee -a $apache_conf echo "ProxyPass \"${loc}\" \"$url\" retry=0 " | sudo tee -a $apache_conf enable_apache_site $name restart_apache_server } function remove_uwsgi_config { local file=$1 local wsgi=$2 local name="" name=$(basename $wsgi) rm -rf $file disable_apache_site $name } # Restore xtrace $_XTRACE_LIB_APACHE # Tell emacs to use shell-script-mode ## Local variables: ## mode: shell-script ## End: