devstack/.zuul.yaml

998 lines
31 KiB
YAML

- nodeset:
name: openstack-single-node-jammy
nodes:
- name: controller
label: ubuntu-jammy
groups:
- name: tempest
nodes:
- controller
- nodeset:
name: openstack-single-node-noble
nodes:
- name: controller
label: ubuntu-noble
groups:
- name: tempest
nodes:
- controller
- nodeset:
name: openstack-single-node-focal
nodes:
- name: controller
label: ubuntu-focal
groups:
- name: tempest
nodes:
- controller
- nodeset:
name: openstack-single-node-bionic
nodes:
- name: controller
label: ubuntu-bionic
groups:
- name: tempest
nodes:
- controller
- nodeset:
name: devstack-single-node-centos-9-stream
nodes:
- name: controller
label: centos-9-stream
groups:
- name: tempest
nodes:
- controller
- nodeset:
name: devstack-single-node-opensuse-15
nodes:
- name: controller
label: opensuse-15
groups:
- name: tempest
nodes:
- controller
- nodeset:
name: devstack-single-node-debian-bookworm
nodes:
- name: controller
label: debian-bookworm
groups:
- name: tempest
nodes:
- controller
# Note(sean-k-mooney): this is still used by horizon for
# horizon-integration-tests, horizon-integration-pytest and
# horizon-ui-pytest, remove when horizon is updated.
- nodeset:
name: devstack-single-node-debian-bullseye
nodes:
- name: controller
label: debian-bullseye
groups:
- name: tempest
nodes:
- controller
- nodeset:
name: devstack-single-node-rockylinux-9
nodes:
- name: controller
label: rockylinux-9
groups:
- name: tempest
nodes:
- controller
- nodeset:
name: openstack-two-node-centos-9-stream
nodes:
- name: controller
label: centos-9-stream
- name: compute1
label: centos-9-stream
groups:
# Node where tests are executed and test results collected
- name: tempest
nodes:
- controller
# Nodes running the compute service
- name: compute
nodes:
- controller
- compute1
# Nodes that are not the controller
- name: subnode
nodes:
- compute1
# Switch node for multinode networking setup
- name: switch
nodes:
- controller
# Peer nodes for multinode networking setup
- name: peers
nodes:
- compute1
- nodeset:
name: openstack-two-node-jammy
nodes:
- name: controller
label: ubuntu-jammy
- name: compute1
label: ubuntu-jammy
groups:
# Node where tests are executed and test results collected
- name: tempest
nodes:
- controller
# Nodes running the compute service
- name: compute
nodes:
- controller
- compute1
# Nodes that are not the controller
- name: subnode
nodes:
- compute1
# Switch node for multinode networking setup
- name: switch
nodes:
- controller
# Peer nodes for multinode networking setup
- name: peers
nodes:
- compute1
- nodeset:
name: openstack-two-node-noble
nodes:
- name: controller
label: ubuntu-noble
- name: compute1
label: ubuntu-noble
groups:
# Node where tests are executed and test results collected
- name: tempest
nodes:
- controller
# Nodes running the compute service
- name: compute
nodes:
- controller
- compute1
# Nodes that are not the controller
- name: subnode
nodes:
- compute1
# Switch node for multinode networking setup
- name: switch
nodes:
- controller
# Peer nodes for multinode networking setup
- name: peers
nodes:
- compute1
- nodeset:
name: openstack-two-node-focal
nodes:
- name: controller
label: ubuntu-focal
- name: compute1
label: ubuntu-focal
groups:
# Node where tests are executed and test results collected
- name: tempest
nodes:
- controller
# Nodes running the compute service
- name: compute
nodes:
- controller
- compute1
# Nodes that are not the controller
- name: subnode
nodes:
- compute1
# Switch node for multinode networking setup
- name: switch
nodes:
- controller
# Peer nodes for multinode networking setup
- name: peers
nodes:
- compute1
- nodeset:
name: openstack-two-node-bionic
nodes:
- name: controller
label: ubuntu-bionic
- name: compute1
label: ubuntu-bionic
groups:
# Node where tests are executed and test results collected
- name: tempest
nodes:
- controller
# Nodes running the compute service
- name: compute
nodes:
- controller
- compute1
# Nodes that are not the controller
- name: subnode
nodes:
- compute1
# Switch node for multinode networking setup
- name: switch
nodes:
- controller
# Peer nodes for multinode networking setup
- name: peers
nodes:
- compute1
- nodeset:
name: openstack-three-node-focal
nodes:
- name: controller
label: ubuntu-focal
- name: compute1
label: ubuntu-focal
- name: compute2
label: ubuntu-focal
groups:
# Node where tests are executed and test results collected
- name: tempest
nodes:
- controller
# Nodes running the compute service
- name: compute
nodes:
- controller
- compute1
- compute2
# Nodes that are not the controller
- name: subnode
nodes:
- compute1
- compute2
# Switch node for multinode networking setup
- name: switch
nodes:
- controller
# Peer nodes for multinode networking setup
- name: peers
nodes:
- compute1
- compute2
- nodeset:
name: openstack-three-node-bionic
nodes:
- name: controller
label: ubuntu-bionic
- name: compute1
label: ubuntu-bionic
- name: compute2
label: ubuntu-bionic
groups:
# Node where tests are executed and test results collected
- name: tempest
nodes:
- controller
# Nodes running the compute service
- name: compute
nodes:
- controller
- compute1
- compute2
# Nodes that are not the controller
- name: subnode
nodes:
- compute1
- compute2
# Switch node for multinode networking setup
- name: switch
nodes:
- controller
# Peer nodes for multinode networking setup
- name: peers
nodes:
- compute1
- compute2
- job:
name: devstack-base
parent: openstack-multinode-fips
abstract: true
description: |
Base abstract Devstack job.
Defines plays and base variables, but it does not include any project
and it does not run any service by default. This is a common base for
all single Devstack jobs, single or multinode.
Variables are defined in job.vars, which is what is then used by single
node jobs and by multi node jobs for the controller, as well as in
job.group-vars.peers, which is what is used by multi node jobs for subnode
nodes (everything but the controller).
required-projects:
- opendev.org/openstack/devstack
roles:
- zuul: opendev.org/openstack/openstack-zuul-jobs
vars:
devstack_localrc:
DATABASE_PASSWORD: secretdatabase
RABBIT_PASSWORD: secretrabbit
ADMIN_PASSWORD: secretadmin
SERVICE_PASSWORD: secretservice
NETWORK_GATEWAY: 10.1.0.1
FIXED_RANGE: 10.1.0.0/20
IPV4_ADDRS_SAFE_TO_USE: 10.1.0.0/20
FLOATING_RANGE: 172.24.5.0/24
PUBLIC_NETWORK_GATEWAY: 172.24.5.1
LOGFILE: /opt/stack/logs/devstacklog.txt
LOG_COLOR: false
VERBOSE: true
VERBOSE_NO_TIMESTAMP: true
NOVNC_FROM_PACKAGE: true
ERROR_ON_CLONE: true
# Gate jobs can't deal with nested virt. Disable it by default.
LIBVIRT_TYPE: '{{ devstack_libvirt_type | default("qemu") }}'
devstack_services:
# Ignore any default set by devstack. Emit a "disable_all_services".
base: false
zuul_copy_output:
'{{ devstack_conf_dir }}/local.conf': logs
'{{ devstack_conf_dir }}/localrc': logs
'{{ devstack_conf_dir }}/.localrc.auto': logs
'{{ devstack_conf_dir }}/.stackenv': logs
'{{ devstack_log_dir }}/dstat-csv.log': logs
'{{ devstack_log_dir }}/devstacklog.txt': logs
'{{ devstack_log_dir }}/devstacklog.txt.summary': logs
'{{ devstack_log_dir }}/tcpdump.pcap': logs
'{{ devstack_log_dir }}/worlddump-latest.txt': logs
'{{ devstack_log_dir }}/qemu.coredump': logs
'{{ devstack_full_log}}': logs
'{{ stage_dir }}/verify_tempest_conf.log': logs
'{{ stage_dir }}/performance.json': logs
'{{ stage_dir }}/apache': logs
'{{ stage_dir }}/apache_config': logs
'{{ stage_dir }}/etc': logs
/var/log/rabbitmq: logs
/var/log/postgresql: logs
/var/log/mysql: logs
/var/log/libvirt: logs
/etc/libvirt: logs
/etc/lvm: logs
/etc/sudoers: logs
/etc/sudoers.d: logs
'{{ stage_dir }}/iptables.txt': logs
'{{ stage_dir }}/df.txt': logs
'{{ stage_dir }}/pip2-freeze.txt': logs
'{{ stage_dir }}/pip3-freeze.txt': logs
'{{ stage_dir }}/dpkg-l.txt': logs
'{{ stage_dir }}/rpm-qa.txt': logs
'{{ stage_dir }}/core': logs
'{{ stage_dir }}/listen53.txt': logs
'{{ stage_dir }}/services.txt': logs
'{{ stage_dir }}/deprecations.log': logs
'{{ stage_dir }}/audit.log': logs
/etc/ceph: logs
/var/log/ceph: logs
/var/log/openvswitch: logs
/var/log/glusterfs: logs
/etc/glusterfs/glusterd.vol: logs
/etc/resolv.conf: logs
/var/log/unbound.log: logs
extensions_to_txt:
conf: true
log: true
localrc: true
stackenv: true
auto: true
group-vars:
subnode:
devstack_localrc:
DATABASE_PASSWORD: secretdatabase
RABBIT_PASSWORD: secretrabbit
ADMIN_PASSWORD: secretadmin
SERVICE_PASSWORD: secretservice
NETWORK_GATEWAY: 10.1.0.1
FIXED_RANGE: 10.1.0.0/20
IPV4_ADDRS_SAFE_TO_USE: 10.1.0.0/20
FLOATING_RANGE: 172.24.5.0/24
PUBLIC_NETWORK_GATEWAY: 172.24.5.1
LOGFILE: /opt/stack/logs/devstacklog.txt
LOG_COLOR: false
VERBOSE: true
VERBOSE_NO_TIMESTAMP: true
NOVNC_FROM_PACKAGE: true
ERROR_ON_CLONE: true
LIBVIRT_TYPE: qemu
devstack_services:
base: false
pre-run: playbooks/pre.yaml
run: playbooks/devstack.yaml
post-run: playbooks/post.yaml
irrelevant-files:
# Documentation related
- ^.*\.rst$
- ^api-ref/.*$
- ^doc/.*$
- ^releasenotes/.*$
# Translations
- ^.*/locale/.*po$
# pre-commit config
- ^.pre-commit-config.yaml$
- job:
name: devstack-minimal
parent: devstack-base
description: |
Minimal devstack base job, intended for use by jobs that need
less than the normal minimum set of required-projects.
nodeset: openstack-single-node-noble
required-projects:
- opendev.org/openstack/requirements
vars:
devstack_localrc:
# Multinode specific settings
SERVICE_HOST: "{{ hostvars['controller']['nodepool']['private_ipv4'] }}"
HOST_IP: "{{ hostvars['controller']['nodepool']['private_ipv4'] }}"
PUBLIC_BRIDGE_MTU: '{{ external_bridge_mtu }}'
devstack_services:
# Shared services
dstat: false
etcd3: true
memory_tracker: true
file_tracker: true
mysql: true
rabbit: true
openstack-cli-server: true
group-vars:
subnode:
devstack_services:
# Shared services
dstat: false
memory_tracker: true
file_tracker: true
openstack-cli-server: true
devstack_localrc:
# Multinode specific settings
HOST_IP: "{{ hostvars[inventory_hostname]['nodepool']['private_ipv4'] }}"
SERVICE_HOST: "{{ hostvars['controller']['nodepool']['private_ipv4'] }}"
PUBLIC_BRIDGE_MTU: '{{ external_bridge_mtu }}'
# Subnode specific settings
DATABASE_TYPE: mysql
RABBIT_HOST: "{{ hostvars['controller']['nodepool']['private_ipv4'] }}"
DATABASE_HOST: "{{ hostvars['controller']['nodepool']['private_ipv4'] }}"
- job:
name: devstack
parent: devstack-minimal
description: |
Base devstack job for integration gate.
This base job can be used for single node and multinode devstack jobs.
With a single node nodeset, this job sets up an "all-in-one" (aio)
devstack with the seven OpenStack services included in the devstack tree:
keystone, glance, cinder, neutron, nova, placement, and swift.
With a two node nodeset, this job sets up an aio + compute node.
The controller can be customised using host-vars.controller, the
sub-nodes can be customised using group-vars.subnode.
Descendent jobs can enable / disable services, add devstack configuration
options, enable devstack plugins, configure log files or directories to be
transferred to the log server.
The job assumes that there is only one controller node. The number of
subnodes can be scaled up seamlessly by setting a custom nodeset in
job.nodeset.
The run playbook consists of a single role, so it can be easily rewritten
and extended.
required-projects:
- opendev.org/openstack/cinder
- opendev.org/openstack/glance
- opendev.org/openstack/keystone
- opendev.org/openstack/neutron
- opendev.org/openstack/nova
- opendev.org/openstack/placement
- opendev.org/openstack/swift
- opendev.org/openstack/os-test-images
timeout: 7200
vars:
# based on observation of the integrated gate
# tempest-integrated-compute was only using ~1.7GB of swap
# when zswap and the host turning are enabled that increase
# slightly to ~2GB. we are setting the swap size to 8GB to
# be safe and account for more complex scenarios.
# we should revisit this value after some time to see if we
# can reduce it.
configure_swap_size: 8192
devstack_localrc:
# Common OpenStack services settings
SWIFT_REPLICAS: 1
SWIFT_START_ALL_SERVICES: false
SWIFT_HASH: 1234123412341234
DEBUG_LIBVIRT_COREDUMPS: true
NOVA_VNC_ENABLED: true
OVN_DBS_LOG_LEVEL: dbg
# tune the host to optimize memory usage and hide io latency
# these setting will configure the kernel to treat the host page
# cache and swap with equal priority, and prefer deferring writes
# changing the default swappiness, dirty_ratio and
# the vfs_cache_pressure
ENABLE_SYSCTL_MEM_TUNING: true
# the net tuning optimizes ipv4 tcp fast open and config the default
# qdisk policy to pfifo_fast which effectively disable all qos.
# this minimizes the cpu load of the host network stack
ENABLE_SYSCTL_NET_TUNING: true
# zswap allows the kernel to compress pages in memory before swapping
# them to disk. this can reduce the amount of swap used and improve
# performance. effectively this trades a small amount of cpu for an
# increase in swap performance by reducing the amount of data
# written to disk. the overall speedup is proportional to the
# compression ratio and the speed of the swap device.
# NOTE: this option is ignored when not using nova with the libvirt
# virt driver.
NOVA_LIBVIRT_TB_CACHE_SIZE: 128
ENABLE_ZSWAP: true
devstack_local_conf:
post-config:
$NEUTRON_CONF:
DEFAULT:
global_physnet_mtu: '{{ external_bridge_mtu }}'
devstack_services:
# Core services enabled for this branch.
# This list replaces the test-matrix.
# Shared services
dstat: false
etcd3: true
memory_tracker: true
file_tracker: true
mysql: true
rabbit: true
tls-proxy: true
# Keystone services
key: true
# Glance services
g-api: true
# Nova services
n-api: true
n-api-meta: true
n-cond: true
n-cpu: true
n-novnc: true
n-sch: true
# Placement service
placement-api: true
# OVN services
ovn-controller: true
ovn-northd: true
ovs-vswitchd: true
ovsdb-server: true
# Neutron services
q-svc: true
q-ovn-metadata-agent: true
# Swift services
s-account: true
s-container: true
s-object: true
s-proxy: true
# Cinder services
c-api: true
c-bak: true
c-sch: true
c-vol: true
# Services we don't need.
# This section is not really needed, it's for readability.
horizon: false
tempest: false
# Test matrix emits ceilometer but ceilomenter is not installed in the
# integrated gate, so specifying the services has not effect.
# ceilometer-*: false
group-vars:
subnode:
devstack_services:
# Core services enabled for this branch.
# This list replaces the test-matrix.
# Shared services
dstat: false
memory_tracker: true
file_tracker: true
tls-proxy: true
# Nova services
n-cpu: true
# Placement services
placement-client: true
# OVN services
ovn-controller: true
ovs-vswitchd: true
ovsdb-server: true
# Neutron services
q-ovn-metadata-agent: true
# Cinder services
c-bak: true
c-vol: true
# Services we don't run at all on subnode.
# This section is not really needed, it's for readability.
# keystone: false
# s-*: false
horizon: false
tempest: false
# Test matrix emits ceilometer but ceilometer is not installed in the
# integrated gate, so specifying the services has not effect.
# ceilometer-*: false
devstack_localrc:
# Subnode specific settings
GLANCE_HOSTPORT: "{{ hostvars['controller']['nodepool']['private_ipv4'] }}:9292"
Q_HOST: "{{ hostvars['controller']['nodepool']['private_ipv4'] }}"
NOVA_VNC_ENABLED: true
ENABLE_CHASSIS_AS_GW: false
# tune the host to optimize memory usage and hide io latency
# these setting will configure the kernel to treat the host page
# cache and swap with equal priority, and prefer deferring writes
# changing the default swappiness, dirty_ratio and
# the vfs_cache_pressure
ENABLE_SYSCTL_MEM_TUNING: true
# the net tuning optimizes ipv4 tcp fast open and config the default
# qdisk policy to pfifo_fast which effectively disable all qos.
# this minimizes the cpu load of the host network stack
ENABLE_SYSCTL_NET_TUNING: true
# zswap allows the kernel to compress pages in memory before swapping
# them to disk. this can reduce the amount of swap used and improve
# performance. effectivly this trades a small amount of cpu for an
# increase in swap performance by reducing the amount of data
# written to disk. the overall speedup is porportional to the
# compression ratio and the speed of the swap device.
ENABLE_ZSWAP: true
# NOTE: this option is ignored when not using nova with the libvirt
# virt driver.
NOVA_LIBVIRT_TB_CACHE_SIZE: 128
- job:
name: devstack-ipv6
parent: devstack
description: |
Devstack single node job for integration gate with IPv6,
all services and tunnels using IPv6 addresses.
vars:
devstack_localrc:
SERVICE_IP_VERSION: 6
SERVICE_HOST: ""
TUNNEL_IP_VERSION: 6
- job:
name: devstack-enforce-scope
parent: devstack
description: |
This job runs the devstack with scope checks enabled.
vars:
devstack_localrc:
ENFORCE_SCOPE: true
- job:
name: devstack-multinode
parent: devstack
nodeset: openstack-two-node-noble
description: |
Simple multinode test to verify multinode functionality on devstack side.
This is not meant to be used as a parent job.
# NOTE(ianw) Platform tests have traditionally been non-voting because
# we often have to rush things through devstack to stabilise the gate,
# and these platforms don't have the round-the-clock support to avoid
# becoming blockers in that situation.
- job:
name: devstack-platform-centos-9-stream
parent: tempest-full-py3
description: CentOS 9 Stream platform test
nodeset: devstack-single-node-centos-9-stream
timeout: 9000
voting: false
- job:
name: devstack-platform-debian-bookworm
parent: tempest-full-py3
description: Debian Bookworm platform test
nodeset: devstack-single-node-debian-bookworm
timeout: 9000
vars:
configure_swap_size: 4096
- job:
name: devstack-platform-rocky-blue-onyx
parent: tempest-full-py3
description: Rocky Linux 9 Blue Onyx platform test
nodeset: devstack-single-node-rockylinux-9
timeout: 9000
# NOTE(danms): This has been failing lately with some repository metadata
# errors. We're marking this as non-voting until it appears to have
# stabilized:
# https://zuul.openstack.org/builds?job_name=devstack-platform-rocky-blue-onyx&skip=0
voting: false
vars:
configure_swap_size: 4096
- job:
name: devstack-platform-ubuntu-jammy
parent: tempest-full-py3
description: Ubuntu 22.04 LTS (Jammy) platform test
nodeset: openstack-single-node-jammy
timeout: 9000
vars:
configure_swap_size: 8192
- job:
name: devstack-platform-ubuntu-noble-ovn-source
parent: devstack-platform-ubuntu-noble
description: Ubuntu 24.04 LTS (noble) platform test (OVN from source)
voting: false
vars:
devstack_localrc:
OVN_BUILD_FROM_SOURCE: True
OVN_BRANCH: "v21.06.0"
OVS_BRANCH: "a4b04276ab5934d087669ff2d191a23931335c87"
OVS_SYSCONFDIR: "/usr/local/etc/openvswitch"
- job:
name: devstack-platform-ubuntu-noble-ovs
parent: tempest-full-py3
description: Ubuntu 24.04 LTS (noble) platform test (OVS)
nodeset: openstack-single-node-noble
voting: false
timeout: 9000
vars:
configure_swap_size: 8192
devstack_localrc:
Q_AGENT: openvswitch
Q_ML2_PLUGIN_MECHANISM_DRIVERS: openvswitch
Q_ML2_TENANT_NETWORK_TYPE: vxlan
devstack_services:
# Disable OVN services
ovn-northd: false
ovn-controller: false
ovs-vswitchd: false
ovsdb-server: false
# Disable Neutron ML2/OVN services
q-ovn-metadata-agent: false
# Enable Neutron ML2/OVS services
q-agt: true
q-dhcp: true
q-l3: true
q-meta: true
q-metering: true
group-vars:
subnode:
devstack_services:
# Disable OVN services
ovn-controller: false
ovs-vswitchd: false
ovsdb-server: false
# Disable Neutron ML2/OVN services
q-ovn-metadata-agent: false
# Enable Neutron ML2/OVS services
q-agt: true
- job:
name: devstack-no-tls-proxy
parent: tempest-full-py3
description: |
Tempest job with tls-proxy off.
Some gates run devstack like this and it follows different code paths.
vars:
devstack_services:
tls-proxy: false
- job:
name: devstack-tox-base
parent: devstack
description: |
Base job for devstack-based functional tests that use tox.
This job is not intended to be run directly. It's just here
for organizational purposes for devstack-tox-functional and
devstack-tox-functional-consumer.
post-run: playbooks/tox/post.yaml
vars:
tox_envlist: functional
tox_install_siblings: false
- job:
name: devstack-tox-functional
parent: devstack-tox-base
description: |
Base job for devstack-based functional tests that use tox.
Runs devstack, then runs the tox ``functional`` environment,
then collects tox/testr build output like normal tox jobs.
Turns off tox sibling installation. Projects may be involved
in the devstack deployment and so may be in the required-projects
list, but may not want to test against master of the other
projects in their tox env. Child jobs can set tox_install_siblings
to True to re-enable sibling processing.
run: playbooks/tox/run-both.yaml
- job:
name: devstack-tox-functional-consumer
parent: devstack
description: |
Base job for devstack-based functional tests for projects that
consume the devstack cloud.
This base job should only be used by projects that are not involved
in the devstack deployment step, but are instead projects that are using
devstack to get a cloud against which they can test things.
Runs devstack in pre-run, then runs the tox ``functional`` environment,
then collects tox/testr build output like normal tox jobs.
Turns off tox sibling installation. Projects may be involved
in the devstack deployment and so may be in the required-projects
list, but may not want to test against master of the other
projects in their tox env. Child jobs can set tox_install_siblings
to True to re-enable sibling processing.
pre-run:
- playbooks/devstack.yaml
- playbooks/tox/pre.yaml
run: playbooks/tox/run.yaml
- job:
name: devstack-unit-tests
nodeset: ubuntu-noble
description: |
Runs unit tests on devstack project.
It runs ``run_tests.sh``.
pre-run: playbooks/unit-tests/pre.yaml
run: playbooks/unit-tests/run.yaml
- project:
templates:
- integrated-gate-py3
- publish-openstack-docs-pti
check:
jobs:
- devstack
- devstack-ipv6
- devstack-enforce-scope
- devstack-platform-centos-9-stream
- devstack-platform-debian-bookworm
- devstack-platform-rocky-blue-onyx
- devstack-platform-ubuntu-noble-ovn-source
- devstack-platform-ubuntu-noble-ovs
- devstack-platform-ubuntu-jammy
- devstack-multinode
- devstack-unit-tests
- openstack-tox-bashate
- ironic-tempest-bios-ipmi-direct-tinyipa
- swift-dsvm-functional
- grenade:
irrelevant-files:
- ^.*\.rst$
- ^doc/.*$
- neutron-ovs-grenade-multinode:
irrelevant-files:
- ^.*\.rst$
- ^doc/.*$
- neutron-ovn-tempest-ovs-release:
voting: false
irrelevant-files:
- ^.*\.rst$
- ^doc/.*$
- tempest-multinode-full-py3:
voting: false
irrelevant-files:
- ^.*\.rst$
- ^doc/.*$
- openstacksdk-functional-devstack:
irrelevant-files:
- ^.*\.rst$
- ^doc/.*$
- tempest-ipv6-only:
irrelevant-files:
- ^.*\.rst$
- ^doc/.*$
- nova-ceph-multistore:
irrelevant-files:
- ^.*\.rst$
- ^doc/.*$
gate:
jobs:
- devstack
- devstack-ipv6
- devstack-platform-debian-bookworm
- devstack-platform-ubuntu-noble
# NOTE(danms): Disabled due to instability, see comment in the job
# definition above.
# - devstack-platform-rocky-blue-onyx
- devstack-enforce-scope
- devstack-multinode
- devstack-unit-tests
- openstack-tox-bashate
- neutron-ovs-grenade-multinode:
irrelevant-files:
- ^.*\.rst$
- ^doc/.*$
- ironic-tempest-bios-ipmi-direct-tinyipa
- swift-dsvm-functional
- grenade:
irrelevant-files:
- ^.*\.rst$
- ^doc/.*$
- openstacksdk-functional-devstack:
irrelevant-files:
- ^.*\.rst$
- ^doc/.*$
- tempest-ipv6-only:
irrelevant-files:
- ^.*\.rst$
- ^doc/.*$
- nova-ceph-multistore:
irrelevant-files:
- ^.*\.rst$
- ^doc/.*$
# Please add a note on each job and conditions for the job not
# being experimental any more, so we can keep this list somewhat
# pruned.
#
# * nova-next: maintained by nova for unreleased/undefaulted
# things, this job is not experimental but often is used to test
# things that are not yet production ready or to test what will be
# the new default after a deprecation period has ended.
# * nova-multi-cell: maintained by nova and now is voting in the
# check queue for nova changes but relies on devstack configuration
experimental:
jobs:
- nova-multi-cell
- nova-next
- devstack-plugin-ceph-tempest-py3:
irrelevant-files:
- ^.*\.rst$
- ^doc/.*$
- neutron-ovs-tempest-dvr:
irrelevant-files:
- ^.*\.rst$
- ^doc/.*$
- neutron-ovs-tempest-dvr-ha-multinode-full:
irrelevant-files:
- ^.*\.rst$
- ^doc/.*$
- cinder-tempest-lvm-multibackend:
irrelevant-files:
- ^.*\.rst$
- ^doc/.*$
- tempest-pg-full:
irrelevant-files:
- ^.*\.rst$
- ^doc/.*$
- devstack-no-tls-proxy
periodic:
jobs:
- devstack-no-tls-proxy
periodic-weekly:
jobs:
- devstack-platform-centos-9-stream
- devstack-platform-debian-bookworm
- devstack-platform-rocky-blue-onyx
- devstack-platform-ubuntu-noble-ovn-source
- devstack-platform-ubuntu-noble-ovs
- devstack-platform-ubuntu-jammy