From 547bd9df28b49a2deb1afa6a3348f507ba0163ac Mon Sep 17 00:00:00 2001 From: Caio Oliveira Date: Thu, 3 Mar 2016 11:04:12 -0300 Subject: [PATCH] Updating docs with support for DL class servers This patch updates the documentation with new supported Server Hardware class (DL360 Gen9) and recommendations about installing python-oneviewclient to enable the support. This patch also corrects a misleading minimum version of python-oneviewclient on L57. Change-Id: I97460bfbd5467496ba3b21fbca55249b31d88d5c --- doc/source/drivers/oneview.rst | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/doc/source/drivers/oneview.rst b/doc/source/drivers/oneview.rst index bb2715d5b3..bae5bf5c02 100644 --- a/doc/source/drivers/oneview.rst +++ b/doc/source/drivers/oneview.rst @@ -54,9 +54,10 @@ The following requirements apply for both ``iscsi_pxe_oneview`` and the communication between Ironic and OneView. Install the ``python-oneviewclient`` module to enable the communication. - Minimum version required is 2.0.1.:: + Minimum version required is 2.0.2 but it is recommended to install the most + up-to-date version.:: - $ pip install "python-oneviewclient>=2.0.1" + $ pip install "python-oneviewclient<3.0.0,>=2.0.2" Tested platforms ================ @@ -65,11 +66,12 @@ Tested platforms * The Enclosure used for testing was the ``BladeSystem c7000 Enclosure G2``. -* The drivers should work on HP Proliant Gen8 Servers supported by +* The drivers should work on HP Proliant Gen8 and Gen9 Servers supported by OneView 2.0 and above. It has been tested with the following servers: - Proliant BL460c Gen8 - Proliant BL465c Gen8 + - Proliant DL360 Gen9 (starting with python-oneviewclient 2.1.0) Drivers =======