openstack/ironic
Code Issues Proposed changes

Merge "Follow-up to fix for power action failure"

Browse Source
This commit is contained in:
Jenkins 2017-07-15 18:04:06 +00:00 committed by Gerrit Code Review
commit a1cbfa5be0
7 changed files with 61 additions and 39 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
doc/source/install/configure-ipmi.rst
View File

@ -48,8 +48,8 @@ IPMI configuration
~~~~~~~~~~~~~~~~~~
If there are slow or unresponsive BMCs in the environment, the
``retry_timeout`` configuration option in the ``[ipmi]`` section may need
to be lowered. The default is fairly conservative, as setting this timeout
``command_retry_timeout`` configuration option in the ``[ipmi]`` section may
need to be lowered. The default is fairly conservative, as setting this timeout
too low can cause older BMCs to crash and require a hard-reset.
Collecting sensor data

31
etc/ironic/ironic.conf.sample
View File

@ -1140,9 +1140,10 @@
# Minimum value: 1
#soft_power_off_timeout = 600
# Number of seconds to wait for power operations to complete
# on the baremetal node before declaring the power operation
# has failed (integer value)
# Number of seconds to wait for power operations to complete,
# i.e., so that a baremetal node is in the desired power
# state. If timed out, the power operation is considered a
# failure. (integer value)
# Minimum value: 2
#power_state_change_timeout = 30
@ -1900,13 +1901,14 @@
# From ironic
#
# Maximum time in seconds to retry, retryable IPMI operations.
# For example if the requested action fails because the BMC is
# busy. There is a tradeoff when setting this value. Setting
# this too low may cause older BMCs to crash and require a
# hard reset. However, setting too high can cause the sync
# power state periodic task to hang when there are slow or
# unresponsive BMCs. (integer value)
# Maximum time in seconds to retry retryable IPMI operations.
# (An operation is retryable, for example, if the requested
# operation fails because the BMC is busy.) There is a
# tradeoff when setting this value. Setting this too low may
# cause older BMCs to crash and require a hard reset. However,
# setting too high can cause the sync power state periodic
# task to hang when there are slow or unresponsive BMCs.
# (integer value)
#command_retry_timeout = 60
# DEPRECATED: Maximum time in seconds to retry IPMI
@ -1917,10 +1919,11 @@
# slow or unresponsive BMCs. (integer value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Option ipmi.command_retry_timeout should be used to
# define IPMI command retries and option
# conductor.power_state_change_timeout should be use to define
# timeout value for waiting for power operations to complete
# Reason: Use option [ipmi]/command_retry_timeout to specify
# the timeout value for IPMI command retries, and use option
# [conductor]/power_state_change_timeout to specify the
# timeout value for waiting for a power operation to complete
# so that a baremetal node reaches the desired power state.
#retry_timeout = <None>
# Minimum time, in seconds, between IPMI operations sent to a

9
ironic/conductor/utils.py
View File

@ -70,6 +70,15 @@ def node_set_boot_device(task, device, persistent=False):
def node_wait_for_power_state(task, new_state, timeout=None):
"""Wait for node to be in new power state.
:param task: a TaskManager instance.
:param new_state: the desired new power state, one of the power states
in :mod:`ironic.common.states`.
:param timeout: number of seconds to wait before giving up. If not
specified, uses the conductor.power_state_change_timeout config value.
:raises: PowerStateFailure if timed out
"""
retry_timeout = (timeout or CONF.conductor.power_state_change_timeout)
def _wait():

5
ironic/conf/conductor.py
View File

@ -148,8 +148,9 @@ opts = [
cfg.IntOpt('power_state_change_timeout',
min=2, default=30,
help=_('Number of seconds to wait for power operations to '
'complete on the baremetal node before declaring the '
'power operation has failed')),
'complete, i.e., so that a baremetal node is in the '
'desired power state. If timed out, the power operation '
'is considered a failure.')),
]

22
ironic/conf/ipmi.py
View File

@ -22,9 +22,10 @@ from ironic.common.i18n import _
opts = [
cfg.IntOpt('command_retry_timeout',
default=60,
help=_('Maximum time in seconds to retry, retryable IPMI '
'operations. For example if the requested action fails '
'because the BMC is busy. There is a tradeoff when '
help=_('Maximum time in seconds to retry retryable IPMI '
'operations. (An operation is retryable, for '
'example, if the requested operation fails '
'because the BMC is busy.) There is a tradeoff when '
'setting this value. Setting this too low may cause '
'older BMCs to crash and require a hard reset. However, '
'setting too high can cause the sync power state '
@ -38,13 +39,14 @@ opts = [
'sync power state periodic task to hang when there are '
'slow or unresponsive BMCs.'),
deprecated_for_removal=True,
deprecated_reason=_('Option ipmi.command_retry_timeout should '
'be used to define IPMI command retries '
'and option '
'conductor.power_state_change_timeout '
'should be use to define timeout value for '
'waiting for power operations to '
'complete')),
deprecated_reason=_('Use option [ipmi]/command_retry_timeout '
'to specify the timeout value for '
'IPMI command retries, and use option '
'[conductor]/power_state_change_timeout to '
'specify the timeout value for waiting for '
'a power operation to complete so that a '
'baremetal node reaches the desired '
'power state.')),
cfg.IntOpt('min_command_interval',
default=5,
help=_('Minimum time, in seconds, between IPMI operations '

4
ironic/drivers/modules/ipmitool.py
View File

@ -396,7 +396,7 @@ def _exec_ipmitool(driver_info, command, check_exit_code=None):
args.append(option)
args.append(driver_info[name])
# TODO(sambetts) Remove useage of ipmi.retry_timeout in Queens
# TODO(sambetts) Remove usage of ipmi.retry_timeout in Queens
timeout = CONF.ipmi.retry_timeout or CONF.ipmi.command_retry_timeout
# specify retry timing more precisely, if supported
@ -473,7 +473,7 @@ def _set_and_wait(task, power_action, driver_info, timeout=None):
:returns: one of ironic.common.states
"""
# TODO(sambetts) Remove useage of ipmi.retry_timeout in Queens
# TODO(sambetts) Remove usage of ipmi.retry_timeout in Queens
default_timeout = CONF.ipmi.retry_timeout
if power_action == states.POWER_ON:

25
releasenotes/notes/fix-bug-1675529-479357c217819420.yaml
View File

@ -1,14 +1,21 @@
---
deprecations:
- |
Configuration option IPMI.retry_timeout is deprecated in favor of new
options IPMI.command_retry_timeout, and
CONDUCTOR.power_state_change_timeout
Configuration option ``[ipmi]/retry_timeout`` is deprecated in favor of
these new options:
* ``[ipmi]/command_retry_timeout``: timeout value to wait for an IPMI
command to complete (be acknowledged by the baremetal node)
* ``[conductor]/power_state_change_timeout``: timeout value to wait for
a power operation to complete, so that the baremetal node is in the
desired new power state
fixes:
- |
Prevents the IPMI driver from needlessly checking status if the power
change action fails. Additionally stop retrying power actions and power
status polls if we receive a non-retryable error from ipmitool.
https//bugs.launchpad.net/ironic/+bug/1675529. New configuration option
`power_state_change_timeout` added to define how many seconds to wait for a
server to change power state when a power action is requested.
Prevents the IPMI driver from needlessly checking status of the baremetal
node if a power change action fails. Additionally, stops retrying power
actions and power status polls on receipt of a non-retryable error from
ipmitool. For more information, see
https//bugs.launchpad.net/ironic/+bug/1675529. A new configuration option
``[conductor]/power_state_change_timeout`` can be used to specify how many
seconds to wait for a baremetal node to change power state when a power
action is requested.