fb1a67fe6b
As sync_local_state periodic task can be disabled, which will lose out on hash ring refresh, so the refresh logic should be independent of it. this patch adds a updated_at to HashRingManager to track of when the ring was last refreshed, and when checks the ring is set, also check the age and rebuild if older than the new config option hash_ring_reset_interval which is default to 180s. Change-Id: Ie46dbf93b920543f99e11774a29878aaf27c3400 Closes-Bug: #1506657
1912 lines
54 KiB
Plaintext
1912 lines
54 KiB
Plaintext
[DEFAULT]
|
|
|
|
#
|
|
# Options defined in ironic.api.app
|
|
#
|
|
|
|
# Authentication strategy used by ironic-api: one of
|
|
# "keystone" or "noauth". "noauth" should not be used in a
|
|
# production environment because all authentication will be
|
|
# disabled. (string value)
|
|
#auth_strategy=keystone
|
|
|
|
# Enable pecan debug mode. WARNING: this is insecure and
|
|
# should not be used in a production environment. (boolean
|
|
# value)
|
|
#pecan_debug=false
|
|
|
|
|
|
#
|
|
# Options defined in ironic.common.driver_factory
|
|
#
|
|
|
|
# Specify the list of drivers to load during service
|
|
# initialization. Missing drivers, or drivers which fail to
|
|
# initialize, will prevent the conductor service from
|
|
# starting. The option default is a recommended set of
|
|
# production-oriented drivers. A complete list of drivers
|
|
# present on your system may be found by enumerating the
|
|
# "ironic.drivers" entrypoint. An example may be found in the
|
|
# developer documentation online. (list value)
|
|
#enabled_drivers=pxe_ipmitool
|
|
|
|
|
|
#
|
|
# Options defined in ironic.common.exception
|
|
#
|
|
|
|
# Used if there is a formatting error when generating an
|
|
# exception message (a programming error). If True, raise an
|
|
# exception; if False, use the unformatted message. (boolean
|
|
# value)
|
|
#fatal_exception_format_errors=false
|
|
|
|
|
|
#
|
|
# Options defined in ironic.common.hash_ring
|
|
#
|
|
|
|
# Exponent to determine number of hash partitions to use when
|
|
# distributing load across conductors. Larger values will
|
|
# result in more even distribution of load and less load when
|
|
# rebalancing the ring, but more memory usage. Number of
|
|
# partitions per conductor is (2^hash_partition_exponent).
|
|
# This determines the granularity of rebalancing: given 10
|
|
# hosts, and an exponent of the 2, there are 40 partitions in
|
|
# the ring.A few thousand partitions should make rebalancing
|
|
# smooth in most cases. The default is suitable for up to a
|
|
# few hundred conductors. Too many partitions has a CPU
|
|
# impact. (integer value)
|
|
#hash_partition_exponent=5
|
|
|
|
# [Experimental Feature] Number of hosts to map onto each hash
|
|
# partition. Setting this to more than one will cause
|
|
# additional conductor services to prepare deployment
|
|
# environments and potentially allow the Ironic cluster to
|
|
# recover more quickly if a conductor instance is terminated.
|
|
# (integer value)
|
|
#hash_distribution_replicas=1
|
|
|
|
# Interval (in seconds) between hash ring resets. (integer
|
|
# value)
|
|
#hash_ring_reset_interval=180
|
|
|
|
|
|
#
|
|
# Options defined in ironic.common.images
|
|
#
|
|
|
|
# If True, convert backing images to "raw" disk image format.
|
|
# (boolean value)
|
|
#force_raw_images=true
|
|
|
|
# Path to isolinux binary file. (string value)
|
|
#isolinux_bin=/usr/lib/syslinux/isolinux.bin
|
|
|
|
# Template file for isolinux configuration file. (string
|
|
# value)
|
|
#isolinux_config_template=$pybasedir/common/isolinux_config.template
|
|
|
|
# Template file for grub configuration file. (string value)
|
|
#grub_config_template=$pybasedir/common/grub_conf.template
|
|
|
|
|
|
#
|
|
# Options defined in ironic.common.paths
|
|
#
|
|
|
|
# Directory where the ironic python module is installed.
|
|
# (string value)
|
|
#pybasedir=/usr/lib/python/site-packages/ironic/ironic
|
|
|
|
# Directory where ironic binaries are installed. (string
|
|
# value)
|
|
#bindir=$pybasedir/bin
|
|
|
|
# Top-level directory for maintaining ironic's state. (string
|
|
# value)
|
|
#state_path=$pybasedir
|
|
|
|
|
|
#
|
|
# Options defined in ironic.common.service
|
|
#
|
|
|
|
# Seconds between running periodic tasks. (integer value)
|
|
#periodic_interval=60
|
|
|
|
# Name of this node. This can be an opaque identifier. It is
|
|
# not necessarily a hostname, FQDN, or IP address. However,
|
|
# the node name must be valid within an AMQP key, and if using
|
|
# ZeroMQ, a valid hostname, FQDN, or IP address. (string
|
|
# value)
|
|
#host=ironic
|
|
|
|
|
|
#
|
|
# Options defined in ironic.common.utils
|
|
#
|
|
|
|
# Path to the rootwrap configuration file to use for running
|
|
# commands as root. (string value)
|
|
#rootwrap_config=/etc/ironic/rootwrap.conf
|
|
|
|
# Temporary working directory, default is Python temp dir.
|
|
# (string value)
|
|
#tempdir=/tmp
|
|
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.image_cache
|
|
#
|
|
|
|
# Run image downloads and raw format conversions in parallel.
|
|
# (boolean value)
|
|
#parallel_image_downloads=false
|
|
|
|
|
|
#
|
|
# Options defined in ironic.netconf
|
|
#
|
|
|
|
# IP address of this host. If unset, will determine the IP
|
|
# programmatically. If unable to do so, will use "127.0.0.1".
|
|
# (string value)
|
|
#my_ip=10.0.0.1
|
|
|
|
|
|
#
|
|
# Options defined in oslo.log
|
|
#
|
|
|
|
# Print debugging output (set logging level to DEBUG instead
|
|
# of default INFO level). (boolean value)
|
|
#debug=false
|
|
|
|
# If set to false, will disable INFO logging level, making
|
|
# WARNING the default. (boolean value)
|
|
#verbose=true
|
|
|
|
# The name of a logging configuration file. This file is
|
|
# appended to any existing logging configuration files. For
|
|
# details about logging configuration files, see the Python
|
|
# logging module documentation. Note that when logging
|
|
# configuration files are used then all logging configuration
|
|
# is set in the configuration file and other logging
|
|
# configuration options are ignored (for example, log_format).
|
|
# (string value)
|
|
# Deprecated group/name - [DEFAULT]/log_config
|
|
#log_config_append=<None>
|
|
|
|
# DEPRECATED. A logging.Formatter log message format string
|
|
# which may use any of the available logging.LogRecord
|
|
# attributes. This option is deprecated. Please use
|
|
# logging_context_format_string and
|
|
# logging_default_format_string instead. This option is
|
|
# ignored if log_config_append is set. (string value)
|
|
#log_format=<None>
|
|
|
|
# Format string for %%(asctime)s in log records. Default:
|
|
# %(default)s . This option is ignored if log_config_append is
|
|
# set. (string value)
|
|
#log_date_format=%Y-%m-%d %H:%M:%S
|
|
|
|
# (Optional) Name of log file to output to. If no default is
|
|
# set, logging will go to stdout. This option is ignored if
|
|
# log_config_append is set. (string value)
|
|
# Deprecated group/name - [DEFAULT]/logfile
|
|
#log_file=<None>
|
|
|
|
# (Optional) The base directory used for relative --log-file
|
|
# paths. This option is ignored if log_config_append is set.
|
|
# (string value)
|
|
# Deprecated group/name - [DEFAULT]/logdir
|
|
#log_dir=<None>
|
|
|
|
# (Optional) Uses logging handler designed to watch file
|
|
# system. When log file is moved or removed this handler will
|
|
# open a new log file with specified path instantaneously. It
|
|
# makes sense only if log-file option is specified and Linux
|
|
# platform is used. This option is ignored if
|
|
# log_config_append is set. (boolean value)
|
|
#watch_log_file=false
|
|
|
|
# Use syslog for logging. Existing syslog format is DEPRECATED
|
|
# and will be changed later to honor RFC5424. This option is
|
|
# ignored if log_config_append is set. (boolean value)
|
|
#use_syslog=false
|
|
|
|
# (Optional) Enables or disables syslog rfc5424 format for
|
|
# logging. If enabled, prefixes the MSG part of the syslog
|
|
# message with APP-NAME (RFC5424). The format without the APP-
|
|
# NAME is deprecated in Kilo, and will be removed in Mitaka,
|
|
# along with this option. This option is ignored if
|
|
# log_config_append is set. (boolean value)
|
|
#use_syslog_rfc_format=true
|
|
|
|
# Syslog facility to receive log lines. This option is ignored
|
|
# if log_config_append is set. (string value)
|
|
#syslog_log_facility=LOG_USER
|
|
|
|
# Log output to standard error. This option is ignored if
|
|
# log_config_append is set. (boolean value)
|
|
#use_stderr=true
|
|
|
|
# Format string to use for log messages with context. (string
|
|
# value)
|
|
#logging_context_format_string=%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
|
|
|
|
# Format string to use for log messages without context.
|
|
# (string value)
|
|
#logging_default_format_string=%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
|
|
|
|
# Data to append to log format when level is DEBUG. (string
|
|
# value)
|
|
#logging_debug_format_suffix=%(funcName)s %(pathname)s:%(lineno)d
|
|
|
|
# Prefix each line of exception output with this format.
|
|
# (string value)
|
|
#logging_exception_prefix=%(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
|
|
|
|
# List of logger=LEVEL pairs. This option is ignored if
|
|
# log_config_append is set. (list value)
|
|
#default_log_levels=amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN
|
|
|
|
# Enables or disables publication of error events. (boolean
|
|
# value)
|
|
#publish_errors=false
|
|
|
|
# The format for an instance that is passed with the log
|
|
# message. (string value)
|
|
#instance_format="[instance: %(uuid)s] "
|
|
|
|
# The format for an instance UUID that is passed with the log
|
|
# message. (string value)
|
|
#instance_uuid_format="[instance: %(uuid)s] "
|
|
|
|
# Enables or disables fatal status of deprecations. (boolean
|
|
# value)
|
|
#fatal_deprecations=false
|
|
|
|
|
|
#
|
|
# Options defined in oslo.messaging
|
|
#
|
|
|
|
# Size of RPC connection pool. (integer value)
|
|
#rpc_conn_pool_size=30
|
|
|
|
# ZeroMQ bind address. Should be a wildcard (*), an ethernet
|
|
# interface, or IP. The "host" option should point or resolve
|
|
# to this address. (string value)
|
|
#rpc_zmq_bind_address=*
|
|
|
|
# MatchMaker driver. (string value)
|
|
#rpc_zmq_matchmaker=redis
|
|
|
|
# Use REQ/REP pattern for all methods CALL/CAST/FANOUT.
|
|
# (boolean value)
|
|
#rpc_zmq_all_req_rep=true
|
|
|
|
# Type of concurrency used. Either "native" or "eventlet"
|
|
# (string value)
|
|
#rpc_zmq_concurrency=eventlet
|
|
|
|
# Number of ZeroMQ contexts, defaults to 1. (integer value)
|
|
#rpc_zmq_contexts=1
|
|
|
|
# Maximum number of ingress messages to locally buffer per
|
|
# topic. Default is unlimited. (integer value)
|
|
#rpc_zmq_topic_backlog=<None>
|
|
|
|
# Directory for holding IPC sockets. (string value)
|
|
#rpc_zmq_ipc_dir=/var/run/openstack
|
|
|
|
# Name of this node. Must be a valid hostname, FQDN, or IP
|
|
# address. Must match "host" option, if running Nova. (string
|
|
# value)
|
|
#rpc_zmq_host=ironic
|
|
|
|
# Seconds to wait before a cast expires (TTL). Only supported
|
|
# by impl_zmq. (integer value)
|
|
#rpc_cast_timeout=30
|
|
|
|
# The default number of seconds that poll should wait. Poll
|
|
# raises timeout exception when timeout expired. (integer
|
|
# value)
|
|
#rpc_poll_timeout=1
|
|
|
|
# Shows whether zmq-messaging uses broker or not. (boolean
|
|
# value)
|
|
#zmq_use_broker=true
|
|
|
|
# Host to locate redis. (string value)
|
|
#host=127.0.0.1
|
|
|
|
# Use this port to connect to redis host. (integer value)
|
|
#port=6379
|
|
|
|
# Password for Redis server (optional). (string value)
|
|
#password=
|
|
|
|
# Size of executor thread pool. (integer value)
|
|
# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
|
|
#executor_thread_pool_size=64
|
|
|
|
# The Drivers(s) to handle sending notifications. Possible
|
|
# values are messaging, messagingv2, routing, log, test, noop
|
|
# (multi valued)
|
|
#notification_driver=
|
|
|
|
# AMQP topic used for OpenStack notifications. (list value)
|
|
# Deprecated group/name - [rpc_notifier2]/topics
|
|
#notification_topics=notifications
|
|
|
|
# Seconds to wait for a response from a call. (integer value)
|
|
#rpc_response_timeout=60
|
|
|
|
# A URL representing the messaging driver to use and its full
|
|
# configuration. If not set, we fall back to the rpc_backend
|
|
# option and driver specific configuration. (string value)
|
|
#transport_url=<None>
|
|
|
|
# The messaging driver to use, defaults to rabbit. Other
|
|
# drivers include qpid and zmq. (string value)
|
|
#rpc_backend=rabbit
|
|
|
|
# The default exchange under which topics are scoped. May be
|
|
# overridden by an exchange name specified in the
|
|
# transport_url option. (string value)
|
|
#control_exchange=openstack
|
|
|
|
|
|
#
|
|
# Options defined in oslo.service.periodic_task
|
|
#
|
|
|
|
# Some periodic tasks can be run in a separate process. Should
|
|
# we run them here? (boolean value)
|
|
#run_external_periodic_tasks=true
|
|
|
|
|
|
#
|
|
# Options defined in oslo.service.service
|
|
#
|
|
|
|
# Enable eventlet backdoor. Acceptable values are 0, <port>,
|
|
# and <start>:<end>, where 0 results in listening on a random
|
|
# tcp port number; <port> results in listening on the
|
|
# specified port number (and not enabling backdoor if that
|
|
# port is in use); and <start>:<end> results in listening on
|
|
# the smallest unused port number within the specified range
|
|
# of port numbers. The chosen port is displayed in the
|
|
# service's log file. (string value)
|
|
#backdoor_port=<None>
|
|
|
|
# Enables or disables logging values of all registered options
|
|
# when starting a service (at DEBUG level). (boolean value)
|
|
#log_options=true
|
|
|
|
|
|
[agent]
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.agent
|
|
#
|
|
|
|
# DEPRECATED. Additional append parameters for baremetal PXE
|
|
# boot. This option is deprecated and will be removed in
|
|
# Mitaka release. Please use [pxe]pxe_append_params instead.
|
|
# (string value)
|
|
#agent_pxe_append_params=nofb nomodeset vga=normal
|
|
|
|
# DEPRECATED. Template file for PXE configuration. This option
|
|
# is deprecated and will be removed in Mitaka release. Please
|
|
# use [pxe]pxe_config_template instead. (string value)
|
|
#agent_pxe_config_template=$pybasedir/drivers/modules/agent_config.template
|
|
|
|
# Whether Ironic will manage booting of the agent ramdisk. If
|
|
# set to False, you will need to configure your mechanism to
|
|
# allow booting the agent ramdisk. (boolean value)
|
|
# Deprecated group/name - [agent]/manage_tftp
|
|
#manage_agent_boot=true
|
|
|
|
# The memory size in MiB consumed by agent when it is booted
|
|
# on a bare metal node. This is used for checking if the image
|
|
# can be downloaded and deployed on the bare metal node after
|
|
# booting agent ramdisk. This may be set according to the
|
|
# memory consumed by the agent ramdisk image. (integer value)
|
|
#memory_consumed_by_agent=0
|
|
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.agent_base_vendor
|
|
#
|
|
|
|
# Maximum interval (in seconds) for agent heartbeats. (integer
|
|
# value)
|
|
#heartbeat_timeout=300
|
|
|
|
# Number of times to retry getting power state to check if
|
|
# bare metal node has been powered off after a soft power off.
|
|
# (integer value)
|
|
#post_deploy_get_power_state_retries=6
|
|
|
|
# Amount of time (in seconds) to wait between polling power
|
|
# state after trigger soft poweroff. (integer value)
|
|
#post_deploy_get_power_state_retry_interval=5
|
|
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.agent_client
|
|
#
|
|
|
|
# API version to use for communicating with the ramdisk agent.
|
|
# (string value)
|
|
#agent_api_version=v1
|
|
|
|
|
|
[amt]
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.amt.common
|
|
#
|
|
|
|
# Protocol used for AMT endpoint, support http/https (string
|
|
# value)
|
|
#protocol=http
|
|
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.amt.power
|
|
#
|
|
|
|
# Maximum number of times to attempt an AMT operation, before
|
|
# failing (integer value)
|
|
#max_attempts=3
|
|
|
|
# Amount of time (in seconds) to wait, before retrying an AMT
|
|
# operation (integer value)
|
|
#action_wait=10
|
|
|
|
|
|
[api]
|
|
|
|
#
|
|
# Options defined in ironic.api
|
|
#
|
|
|
|
# The IP address on which ironic-api listens. (string value)
|
|
#host_ip=0.0.0.0
|
|
|
|
# The TCP port on which ironic-api listens. (integer value)
|
|
#port=6385
|
|
|
|
# The maximum number of items returned in a single response
|
|
# from a collection resource. (integer value)
|
|
#max_limit=1000
|
|
|
|
# Public URL to use when building the links to the API
|
|
# resources (for example, "https://ironic.rocks:6384"). If
|
|
# None the links will be built using the request's host URL.
|
|
# If the API is operating behind a proxy, you will want to
|
|
# change this to represent the proxy's URL. Defaults to None.
|
|
# (string value)
|
|
#public_endpoint=<None>
|
|
|
|
|
|
[cimc]
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.cimc.power
|
|
#
|
|
|
|
# Number of times a power operation needs to be retried
|
|
# (integer value)
|
|
#max_retry=6
|
|
|
|
# Amount of time in seconds to wait in between power
|
|
# operations (integer value)
|
|
#action_interval=10
|
|
|
|
|
|
[cisco_ucs]
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.ucs.power
|
|
#
|
|
|
|
# Number of times a power operation needs to be retried
|
|
# (integer value)
|
|
#max_retry=6
|
|
|
|
# Amount of time in seconds to wait in between power
|
|
# operations (integer value)
|
|
#action_interval=5
|
|
|
|
|
|
[conductor]
|
|
|
|
#
|
|
# Options defined in ironic.conductor.manager
|
|
#
|
|
|
|
# URL of Ironic API service. If not set ironic can get the
|
|
# current value from the keystone service catalog. (string
|
|
# value)
|
|
#api_url=<None>
|
|
|
|
# Seconds between conductor heart beats. (integer value)
|
|
#heartbeat_interval=10
|
|
|
|
# Maximum time (in seconds) since the last check-in of a
|
|
# conductor. A conductor is considered inactive when this time
|
|
# has been exceeded. (integer value)
|
|
#heartbeat_timeout=60
|
|
|
|
# Interval between syncing the node power state to the
|
|
# database, in seconds. (integer value)
|
|
#sync_power_state_interval=60
|
|
|
|
# Interval between checks of provision timeouts, in seconds.
|
|
# (integer value)
|
|
#check_provision_state_interval=60
|
|
|
|
# Timeout (seconds) to wait for a callback from a deploy
|
|
# ramdisk. Set to 0 to disable timeout. (integer value)
|
|
#deploy_callback_timeout=1800
|
|
|
|
# During sync_power_state, should the hardware power state be
|
|
# set to the state recorded in the database (True) or should
|
|
# the database be updated based on the hardware state (False).
|
|
# (boolean value)
|
|
#force_power_state_during_sync=true
|
|
|
|
# During sync_power_state failures, limit the number of times
|
|
# Ironic should try syncing the hardware node power state with
|
|
# the node power state in DB (integer value)
|
|
#power_state_sync_max_retries=3
|
|
|
|
# Maximum number of worker threads that can be started
|
|
# simultaneously by a periodic task. Should be less than RPC
|
|
# thread pool size. (integer value)
|
|
#periodic_max_workers=8
|
|
|
|
# The size of the workers greenthread pool. (integer value)
|
|
#workers_pool_size=100
|
|
|
|
# Number of attempts to grab a node lock. (integer value)
|
|
#node_locked_retry_attempts=3
|
|
|
|
# Seconds to sleep between node lock attempts. (integer value)
|
|
#node_locked_retry_interval=1
|
|
|
|
# Enable sending sensor data message via the notification bus
|
|
# (boolean value)
|
|
#send_sensor_data=false
|
|
|
|
# Seconds between conductor sending sensor data message to
|
|
# ceilometer via the notification bus. (integer value)
|
|
#send_sensor_data_interval=600
|
|
|
|
# List of comma separated meter types which need to be sent to
|
|
# Ceilometer. The default value, "ALL", is a special value
|
|
# meaning send all the sensor data. (list value)
|
|
#send_sensor_data_types=ALL
|
|
|
|
# When conductors join or leave the cluster, existing
|
|
# conductors may need to update any persistent local state as
|
|
# nodes are moved around the cluster. This option controls how
|
|
# often, in seconds, each conductor will check for nodes that
|
|
# it should "take over". Set it to a negative value to disable
|
|
# the check entirely. (integer value)
|
|
#sync_local_state_interval=180
|
|
|
|
# Whether to upload the config drive to Swift. (boolean value)
|
|
#configdrive_use_swift=false
|
|
|
|
# Name of the Swift container to store config drive data. Used
|
|
# when configdrive_use_swift is True. (string value)
|
|
#configdrive_swift_container=ironic_configdrive_container
|
|
|
|
# Timeout (seconds) for waiting for node inspection. 0 -
|
|
# unlimited. (integer value)
|
|
#inspect_timeout=1800
|
|
|
|
# Cleaning is a configurable set of steps, such as erasing
|
|
# disk drives, that are performed on the node to ensure it is
|
|
# in a baseline state and ready to be deployed to. This is
|
|
# done after instance deletion, and during the transition from
|
|
# a "managed" to "available" state. When enabled, the
|
|
# particular steps performed to clean a node depend on which
|
|
# driver that node is managed by; see the individual driver's
|
|
# documentation for details. NOTE: The introduction of the
|
|
# cleaning operation causes instance deletion to take
|
|
# significantly longer. In an environment where all tenants
|
|
# are trusted (eg, because there is only one tenant), this
|
|
# option could be safely disabled. (boolean value)
|
|
#clean_nodes=true
|
|
|
|
# Timeout (seconds) to wait for a callback from the ramdisk
|
|
# doing the cleaning. If the timeout is reached the node will
|
|
# be put in the "clean failed" provision state. Set to 0 to
|
|
# disable timeout. (integer value)
|
|
#clean_callback_timeout=1800
|
|
|
|
|
|
[console]
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.console_utils
|
|
#
|
|
|
|
# Path to serial console terminal program (string value)
|
|
#terminal=shellinaboxd
|
|
|
|
# Directory containing the terminal SSL cert(PEM) for serial
|
|
# console access (string value)
|
|
#terminal_cert_dir=<None>
|
|
|
|
# Directory for holding terminal pid files. If not specified,
|
|
# the temporary directory will be used. (string value)
|
|
#terminal_pid_dir=<None>
|
|
|
|
# Time interval (in seconds) for checking the status of
|
|
# console subprocess. (integer value)
|
|
#subprocess_checking_interval=1
|
|
|
|
# Time (in seconds) to wait for the console subprocess to
|
|
# start. (integer value)
|
|
#subprocess_timeout=10
|
|
|
|
|
|
[cors]
|
|
|
|
#
|
|
# Options defined in oslo.middleware.cors
|
|
#
|
|
|
|
# Indicate whether this resource may be shared with the domain
|
|
# received in the requests "origin" header. (string value)
|
|
#allowed_origin=<None>
|
|
|
|
# Indicate that the actual request can include user
|
|
# credentials (boolean value)
|
|
#allow_credentials=true
|
|
|
|
# Indicate which headers are safe to expose to the API.
|
|
# Defaults to HTTP Simple Headers. (list value)
|
|
#expose_headers=Content-Type,Cache-Control,Content-Language,Expires,Last-Modified,Pragma
|
|
|
|
# Maximum cache age of CORS preflight requests. (integer
|
|
# value)
|
|
#max_age=3600
|
|
|
|
# Indicate which methods can be used during the actual
|
|
# request. (list value)
|
|
#allow_methods=GET,POST,PUT,DELETE,OPTIONS
|
|
|
|
# Indicate which header field names may be used during the
|
|
# actual request. (list value)
|
|
#allow_headers=Content-Type,Cache-Control,Content-Language,Expires,Last-Modified,Pragma
|
|
|
|
|
|
[cors.subdomain]
|
|
|
|
#
|
|
# Options defined in oslo.middleware.cors
|
|
#
|
|
|
|
# Indicate whether this resource may be shared with the domain
|
|
# received in the requests "origin" header. (string value)
|
|
#allowed_origin=<None>
|
|
|
|
# Indicate that the actual request can include user
|
|
# credentials (boolean value)
|
|
#allow_credentials=true
|
|
|
|
# Indicate which headers are safe to expose to the API.
|
|
# Defaults to HTTP Simple Headers. (list value)
|
|
#expose_headers=Content-Type,Cache-Control,Content-Language,Expires,Last-Modified,Pragma
|
|
|
|
# Maximum cache age of CORS preflight requests. (integer
|
|
# value)
|
|
#max_age=3600
|
|
|
|
# Indicate which methods can be used during the actual
|
|
# request. (list value)
|
|
#allow_methods=GET,POST,PUT,DELETE,OPTIONS
|
|
|
|
# Indicate which header field names may be used during the
|
|
# actual request. (list value)
|
|
#allow_headers=Content-Type,Cache-Control,Content-Language,Expires,Last-Modified,Pragma
|
|
|
|
|
|
[database]
|
|
|
|
#
|
|
# Options defined in ironic.db.sqlalchemy.models
|
|
#
|
|
|
|
# MySQL engine to use. (string value)
|
|
#mysql_engine=InnoDB
|
|
|
|
|
|
#
|
|
# Options defined in oslo.db
|
|
#
|
|
|
|
# The file name to use with SQLite. (string value)
|
|
#sqlite_db=oslo.sqlite
|
|
|
|
# If True, SQLite uses synchronous mode. (boolean value)
|
|
#sqlite_synchronous=true
|
|
|
|
# The back end to use for the database. (string value)
|
|
# Deprecated group/name - [DEFAULT]/db_backend
|
|
#backend=sqlalchemy
|
|
|
|
# The SQLAlchemy connection string to use to connect to the
|
|
# database. (string value)
|
|
# Deprecated group/name - [DEFAULT]/sql_connection
|
|
# Deprecated group/name - [DATABASE]/sql_connection
|
|
# Deprecated group/name - [sql]/connection
|
|
#connection=<None>
|
|
|
|
# The SQLAlchemy connection string to use to connect to the
|
|
# slave database. (string value)
|
|
#slave_connection=<None>
|
|
|
|
# The SQL mode to be used for MySQL sessions. This option,
|
|
# including the default, overrides any server-set SQL mode. To
|
|
# use whatever SQL mode is set by the server configuration,
|
|
# set this to no value. Example: mysql_sql_mode= (string
|
|
# value)
|
|
#mysql_sql_mode=TRADITIONAL
|
|
|
|
# Timeout before idle SQL connections are reaped. (integer
|
|
# value)
|
|
# Deprecated group/name - [DEFAULT]/sql_idle_timeout
|
|
# Deprecated group/name - [DATABASE]/sql_idle_timeout
|
|
# Deprecated group/name - [sql]/idle_timeout
|
|
#idle_timeout=3600
|
|
|
|
# Minimum number of SQL connections to keep open in a pool.
|
|
# (integer value)
|
|
# Deprecated group/name - [DEFAULT]/sql_min_pool_size
|
|
# Deprecated group/name - [DATABASE]/sql_min_pool_size
|
|
#min_pool_size=1
|
|
|
|
# Maximum number of SQL connections to keep open in a pool.
|
|
# (integer value)
|
|
# Deprecated group/name - [DEFAULT]/sql_max_pool_size
|
|
# Deprecated group/name - [DATABASE]/sql_max_pool_size
|
|
#max_pool_size=<None>
|
|
|
|
# Maximum number of database connection retries during
|
|
# startup. Set to -1 to specify an infinite retry count.
|
|
# (integer value)
|
|
# Deprecated group/name - [DEFAULT]/sql_max_retries
|
|
# Deprecated group/name - [DATABASE]/sql_max_retries
|
|
#max_retries=10
|
|
|
|
# Interval between retries of opening a SQL connection.
|
|
# (integer value)
|
|
# Deprecated group/name - [DEFAULT]/sql_retry_interval
|
|
# Deprecated group/name - [DATABASE]/reconnect_interval
|
|
#retry_interval=10
|
|
|
|
# If set, use this value for max_overflow with SQLAlchemy.
|
|
# (integer value)
|
|
# Deprecated group/name - [DEFAULT]/sql_max_overflow
|
|
# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
|
|
#max_overflow=<None>
|
|
|
|
# Verbosity of SQL debugging information: 0=None,
|
|
# 100=Everything. (integer value)
|
|
# Deprecated group/name - [DEFAULT]/sql_connection_debug
|
|
#connection_debug=0
|
|
|
|
# Add Python stack traces to SQL as comment strings. (boolean
|
|
# value)
|
|
# Deprecated group/name - [DEFAULT]/sql_connection_trace
|
|
#connection_trace=false
|
|
|
|
# If set, use this value for pool_timeout with SQLAlchemy.
|
|
# (integer value)
|
|
# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
|
|
#pool_timeout=<None>
|
|
|
|
# Enable the experimental use of database reconnect on
|
|
# connection lost. (boolean value)
|
|
#use_db_reconnect=false
|
|
|
|
# Seconds between retries of a database transaction. (integer
|
|
# value)
|
|
#db_retry_interval=1
|
|
|
|
# If True, increases the interval between retries of a
|
|
# database operation up to db_max_retry_interval. (boolean
|
|
# value)
|
|
#db_inc_retry_interval=true
|
|
|
|
# If db_inc_retry_interval is set, the maximum seconds between
|
|
# retries of a database operation. (integer value)
|
|
#db_max_retry_interval=10
|
|
|
|
# Maximum retries in case of connection error or deadlock
|
|
# error before error is raised. Set to -1 to specify an
|
|
# infinite retry count. (integer value)
|
|
#db_max_retries=20
|
|
|
|
|
|
[deploy]
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.deploy_utils
|
|
#
|
|
|
|
# Size of EFI system partition in MiB when configuring UEFI
|
|
# systems for local boot. (integer value)
|
|
#efi_system_partition_size=200
|
|
|
|
# Block size to use when writing to the nodes disk. (string
|
|
# value)
|
|
#dd_block_size=1M
|
|
|
|
# Maximum attempts to verify an iSCSI connection is active,
|
|
# sleeping 1 second between attempts. (integer value)
|
|
#iscsi_verify_attempts=3
|
|
|
|
# ironic-conductor node's HTTP server URL. Example:
|
|
# http://192.1.2.3:8080 (string value)
|
|
#http_url=<None>
|
|
|
|
# ironic-conductor node's HTTP root path. (string value)
|
|
#http_root=/httpboot
|
|
|
|
# Priority to run in-band erase devices via the Ironic Python
|
|
# Agent ramdisk. If unset, will use the priority set in the
|
|
# ramdisk (defaults to 10 for the GenericHardwareManager). If
|
|
# set to 0, will not run during cleaning. (integer value)
|
|
# Deprecated group/name - [agent]/agent_erase_devices_priority
|
|
#erase_devices_priority=<None>
|
|
|
|
# Number of iterations to be run for erasing devices. (integer
|
|
# value)
|
|
# Deprecated group/name - [agent]/agent_erase_devices_iterations
|
|
#erase_devices_iterations=1
|
|
|
|
|
|
[dhcp]
|
|
|
|
#
|
|
# Options defined in ironic.common.dhcp_factory
|
|
#
|
|
|
|
# DHCP provider to use. "neutron" uses Neutron, and "none"
|
|
# uses a no-op provider. (string value)
|
|
#dhcp_provider=neutron
|
|
|
|
|
|
[disk_partitioner]
|
|
|
|
#
|
|
# Options defined in ironic.common.disk_partitioner
|
|
#
|
|
|
|
# After Ironic has completed creating the partition table, it
|
|
# continues to check for activity on the attached iSCSI device
|
|
# status at this interval prior to copying the image to the
|
|
# node, in seconds (integer value)
|
|
#check_device_interval=1
|
|
|
|
# The maximum number of times to check that the device is not
|
|
# accessed by another process. If the device is still busy
|
|
# after that, the disk partitioning will be treated as having
|
|
# failed. (integer value)
|
|
#check_device_max_retries=20
|
|
|
|
|
|
[drac]
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.drac.client
|
|
#
|
|
|
|
# In case there is a communication failure, the DRAC client
|
|
# resends the request as many times as defined in this
|
|
# setting. (integer value)
|
|
#client_retry_count=5
|
|
|
|
# In case there is a communication failure, the DRAC client
|
|
# waits for as many seconds as defined in this setting before
|
|
# resending the request. (integer value)
|
|
#client_retry_delay=5
|
|
|
|
|
|
[glance]
|
|
|
|
#
|
|
# Options defined in ironic.common.glance_service.v2.image_service
|
|
#
|
|
|
|
# A list of URL schemes that can be downloaded directly via
|
|
# the direct_url. Currently supported schemes: [file]. (list
|
|
# value)
|
|
#allowed_direct_url_schemes=
|
|
|
|
# The secret token given to Swift to allow temporary URL
|
|
# downloads. Required for temporary URLs. (string value)
|
|
#swift_temp_url_key=<None>
|
|
|
|
# The length of time in seconds that the temporary URL will be
|
|
# valid for. Defaults to 20 minutes. If some deploys get a 401
|
|
# response code when trying to download from the temporary
|
|
# URL, try raising this duration. (integer value)
|
|
#swift_temp_url_duration=1200
|
|
|
|
# The "endpoint" (scheme, hostname, optional port) for the
|
|
# Swift URL of the form
|
|
# "endpoint_url/api_version/[account/]container/object_id". Do
|
|
# not include trailing "/". For example, use
|
|
# "https://swift.example.com". In case of using RADOS Gateway,
|
|
# endpoint may also contain /swift path, if it does not, it
|
|
# will be appended. Required for temporary URLs. (string
|
|
# value)
|
|
#swift_endpoint_url=<None>
|
|
|
|
# The Swift API version to create a temporary URL for.
|
|
# Defaults to "v1". Swift temporary URL format:
|
|
# "endpoint_url/api_version/[account/]container/object_id"
|
|
# (string value)
|
|
#swift_api_version=v1
|
|
|
|
# The account that Glance uses to communicate with Swift. The
|
|
# format is "AUTH_uuid". "uuid" is the UUID for the account
|
|
# configured in the glance-api.conf. Required for temporary
|
|
# URLs when Glance backend is Swift. For example:
|
|
# "AUTH_a422b2-91f3-2f46-74b7-d7c9e8958f5d30". Swift temporary
|
|
# URL format:
|
|
# "endpoint_url/api_version/[account/]container/object_id"
|
|
# (string value)
|
|
#swift_account=<None>
|
|
|
|
# The Swift container Glance is configured to store its images
|
|
# in. Defaults to "glance", which is the default in glance-
|
|
# api.conf. Swift temporary URL format:
|
|
# "endpoint_url/api_version/[account/]container/object_id"
|
|
# (string value)
|
|
#swift_container=glance
|
|
|
|
# This should match a config by the same name in the Glance
|
|
# configuration file. When set to 0, a single-tenant store
|
|
# will only use one container to store all images. When set to
|
|
# an integer value between 1 and 32, a single-tenant store
|
|
# will use multiple containers to store images, and this value
|
|
# will determine how many containers are created. (integer
|
|
# value)
|
|
#swift_store_multiple_containers_seed=0
|
|
|
|
# Type of the endpoint to use for temporary URLs. It depends
|
|
# on an actual Glance backend used. Possible values are
|
|
# "swift" and "radosgw". (string value)
|
|
#temp_url_endpoint_type=swift
|
|
|
|
|
|
#
|
|
# Options defined in ironic.common.image_service
|
|
#
|
|
|
|
# Default glance hostname or IP address. (string value)
|
|
#glance_host=$my_ip
|
|
|
|
# Default glance port. (integer value)
|
|
#glance_port=9292
|
|
|
|
# Default protocol to use when connecting to glance. Set to
|
|
# https for SSL. (string value)
|
|
#glance_protocol=http
|
|
|
|
# A list of the glance api servers available to ironic. Prefix
|
|
# with https:// for SSL-based glance API servers. Format is
|
|
# [hostname|IP]:port. (list value)
|
|
#glance_api_servers=<None>
|
|
|
|
# Allow to perform insecure SSL (https) requests to glance.
|
|
# (boolean value)
|
|
#glance_api_insecure=false
|
|
|
|
# Number of retries when downloading an image from glance.
|
|
# (integer value)
|
|
#glance_num_retries=0
|
|
|
|
# Authentication strategy to use when connecting to glance.
|
|
# Only "keystone" and "noauth" are currently supported by
|
|
# ironic. (string value)
|
|
#auth_strategy=keystone
|
|
|
|
|
|
[iboot]
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.iboot
|
|
#
|
|
|
|
# Maximum retries for iBoot operations (integer value)
|
|
#max_retry=3
|
|
|
|
# Time (in seconds) between retry attempts for iBoot
|
|
# operations (integer value)
|
|
#retry_interval=1
|
|
|
|
# Time (in seconds) to sleep between when rebooting (powering
|
|
# off and on again). (integer value)
|
|
#reboot_delay=5
|
|
|
|
|
|
[ilo]
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.ilo.common
|
|
#
|
|
|
|
# Timeout (in seconds) for iLO operations (integer value)
|
|
#client_timeout=60
|
|
|
|
# Port to be used for iLO operations (integer value)
|
|
#client_port=443
|
|
|
|
# The Swift iLO container to store data. (string value)
|
|
#swift_ilo_container=ironic_ilo_container
|
|
|
|
# Amount of time in seconds for Swift objects to auto-expire.
|
|
# (integer value)
|
|
#swift_object_expiry_timeout=900
|
|
|
|
# Set this to True to use http web server to host floppy
|
|
# images and generated boot ISO. This requires http_root and
|
|
# http_url to be configured in the [deploy] section of the
|
|
# config file. If this is set to False, then Ironic will use
|
|
# Swift to host the floppy images and generated boot_iso.
|
|
# (boolean value)
|
|
#use_web_server_for_images=false
|
|
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.ilo.deploy
|
|
#
|
|
|
|
# Priority for erase devices clean step. If unset, it defaults
|
|
# to 10. If set to 0, the step will be disabled and will not
|
|
# run during cleaning. (integer value)
|
|
#clean_priority_erase_devices=<None>
|
|
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.ilo.management
|
|
#
|
|
|
|
# Priority for reset_ilo clean step. (integer value)
|
|
#clean_priority_reset_ilo=1
|
|
|
|
# Priority for reset_bios_to_default clean step. (integer
|
|
# value)
|
|
#clean_priority_reset_bios_to_default=10
|
|
|
|
# Priority for reset_secure_boot_keys clean step. This step
|
|
# will reset the secure boot keys to manufacturing defaults.
|
|
# (integer value)
|
|
#clean_priority_reset_secure_boot_keys_to_default=20
|
|
|
|
# Priority for clear_secure_boot_keys clean step. This step is
|
|
# not enabled by default. It can be enabled to to clear all
|
|
# secure boot keys enrolled with iLO. (integer value)
|
|
#clean_priority_clear_secure_boot_keys=0
|
|
|
|
# Priority for reset_ilo_credential clean step. This step
|
|
# requires "ilo_change_password" parameter to be updated in
|
|
# nodes's driver_info with the new password. (integer value)
|
|
#clean_priority_reset_ilo_credential=30
|
|
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.ilo.power
|
|
#
|
|
|
|
# Number of times a power operation needs to be retried
|
|
# (integer value)
|
|
#power_retry=6
|
|
|
|
# Amount of time in seconds to wait in between power
|
|
# operations (integer value)
|
|
#power_wait=2
|
|
|
|
|
|
[inspector]
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.inspector
|
|
#
|
|
|
|
# whether to enable inspection using ironic-inspector (boolean
|
|
# value)
|
|
#enabled=false
|
|
|
|
# ironic-inspector HTTP endpoint. If this is not set, the
|
|
# ironic-inspector client default (http://127.0.0.1:5050) will
|
|
# be used. (string value)
|
|
#service_url=<None>
|
|
|
|
# period (in seconds) to check status of nodes on inspection
|
|
# (integer value)
|
|
#status_check_period=60
|
|
|
|
|
|
[ipmi]
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.ipminative
|
|
#
|
|
|
|
# Maximum time in seconds to retry IPMI operations. There is a
|
|
# tradeoff when setting this value. Setting this too low may
|
|
# cause older BMCs to crash and require a hard reset. However,
|
|
# setting too high can cause the sync power state periodic
|
|
# task to hang when there are slow or unresponsive BMCs.
|
|
# (integer value)
|
|
#retry_timeout=60
|
|
|
|
# Minimum time, in seconds, between IPMI operations sent to a
|
|
# server. There is a risk with some hardware that setting this
|
|
# too low may cause the BMC to crash. Recommended setting is 5
|
|
# seconds. (integer value)
|
|
#min_command_interval=5
|
|
|
|
|
|
[irmc]
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.irmc.common
|
|
#
|
|
|
|
# Port to be used for iRMC operations, either 80 or 443
|
|
# (integer value)
|
|
#port=443
|
|
|
|
# Authentication method to be used for iRMC operations, either
|
|
# "basic" or "digest" (string value)
|
|
#auth_method=basic
|
|
|
|
# Timeout (in seconds) for iRMC operations (integer value)
|
|
#client_timeout=60
|
|
|
|
# Sensor data retrieval method, either "ipmitool" or "scci"
|
|
# (string value)
|
|
#sensor_method=ipmitool
|
|
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.irmc.deploy
|
|
#
|
|
|
|
# Ironic conductor node's "NFS" or "CIFS" root path (string
|
|
# value)
|
|
#remote_image_share_root=/remote_image_share_root
|
|
|
|
# IP of remote image server (string value)
|
|
#remote_image_server=<None>
|
|
|
|
# Share type of virtual media, either "NFS" or "CIFS" (string
|
|
# value)
|
|
#remote_image_share_type=CIFS
|
|
|
|
# share name of remote_image_server (string value)
|
|
#remote_image_share_name=share
|
|
|
|
# User name of remote_image_server (string value)
|
|
#remote_image_user_name=<None>
|
|
|
|
# Password of remote_image_user_name (string value)
|
|
#remote_image_user_password=<None>
|
|
|
|
# Domain name of remote_image_user_name (string value)
|
|
#remote_image_user_domain=
|
|
|
|
|
|
[keystone]
|
|
|
|
#
|
|
# Options defined in ironic.common.keystone
|
|
#
|
|
|
|
# The region used for getting endpoints of OpenStack services.
|
|
# (string value)
|
|
#region_name=<None>
|
|
|
|
|
|
[keystone_authtoken]
|
|
|
|
#
|
|
# Options defined in keystonemiddleware.auth_token
|
|
#
|
|
|
|
# Complete public Identity API endpoint. (string value)
|
|
#auth_uri=<None>
|
|
|
|
# API version of the admin Identity API endpoint. (string
|
|
# value)
|
|
#auth_version=<None>
|
|
|
|
# Do not handle authorization requests within the middleware,
|
|
# but delegate the authorization decision to downstream WSGI
|
|
# components. (boolean value)
|
|
#delay_auth_decision=false
|
|
|
|
# Request timeout value for communicating with Identity API
|
|
# server. (integer value)
|
|
#http_connect_timeout=<None>
|
|
|
|
# How many times are we trying to reconnect when communicating
|
|
# with Identity API Server. (integer value)
|
|
#http_request_max_retries=3
|
|
|
|
# Env key for the swift cache. (string value)
|
|
#cache=<None>
|
|
|
|
# Required if identity server requires client certificate
|
|
# (string value)
|
|
#certfile=<None>
|
|
|
|
# Required if identity server requires client certificate
|
|
# (string value)
|
|
#keyfile=<None>
|
|
|
|
# A PEM encoded Certificate Authority to use when verifying
|
|
# HTTPs connections. Defaults to system CAs. (string value)
|
|
#cafile=<None>
|
|
|
|
# Verify HTTPS connections. (boolean value)
|
|
#insecure=false
|
|
|
|
# The region in which the identity server can be found.
|
|
# (string value)
|
|
#region_name=<None>
|
|
|
|
# Directory used to cache files related to PKI tokens. (string
|
|
# value)
|
|
#signing_dir=<None>
|
|
|
|
# Optionally specify a list of memcached server(s) to use for
|
|
# caching. If left undefined, tokens will instead be cached
|
|
# in-process. (list value)
|
|
# Deprecated group/name - [DEFAULT]/memcache_servers
|
|
#memcached_servers=<None>
|
|
|
|
# In order to prevent excessive effort spent validating
|
|
# tokens, the middleware caches previously-seen tokens for a
|
|
# configurable duration (in seconds). Set to -1 to disable
|
|
# caching completely. (integer value)
|
|
#token_cache_time=300
|
|
|
|
# Determines the frequency at which the list of revoked tokens
|
|
# is retrieved from the Identity service (in seconds). A high
|
|
# number of revocation events combined with a low cache
|
|
# duration may significantly reduce performance. (integer
|
|
# value)
|
|
#revocation_cache_time=10
|
|
|
|
# (Optional) If defined, indicate whether token data should be
|
|
# authenticated or authenticated and encrypted. Acceptable
|
|
# values are MAC or ENCRYPT. If MAC, token data is
|
|
# authenticated (with HMAC) in the cache. If ENCRYPT, token
|
|
# data is encrypted and authenticated in the cache. If the
|
|
# value is not one of these options or empty, auth_token will
|
|
# raise an exception on initialization. (string value)
|
|
#memcache_security_strategy=<None>
|
|
|
|
# (Optional, mandatory if memcache_security_strategy is
|
|
# defined) This string is used for key derivation. (string
|
|
# value)
|
|
#memcache_secret_key=<None>
|
|
|
|
# (Optional) Number of seconds memcached server is considered
|
|
# dead before it is tried again. (integer value)
|
|
#memcache_pool_dead_retry=300
|
|
|
|
# (Optional) Maximum total number of open connections to every
|
|
# memcached server. (integer value)
|
|
#memcache_pool_maxsize=10
|
|
|
|
# (Optional) Socket timeout in seconds for communicating with
|
|
# a memcached server. (integer value)
|
|
#memcache_pool_socket_timeout=3
|
|
|
|
# (Optional) Number of seconds a connection to memcached is
|
|
# held unused in the pool before it is closed. (integer value)
|
|
#memcache_pool_unused_timeout=60
|
|
|
|
# (Optional) Number of seconds that an operation will wait to
|
|
# get a memcached client connection from the pool. (integer
|
|
# value)
|
|
#memcache_pool_conn_get_timeout=10
|
|
|
|
# (Optional) Use the advanced (eventlet safe) memcached client
|
|
# pool. The advanced pool will only work under python 2.x.
|
|
# (boolean value)
|
|
#memcache_use_advanced_pool=false
|
|
|
|
# (Optional) Indicate whether to set the X-Service-Catalog
|
|
# header. If False, middleware will not ask for service
|
|
# catalog on token validation and will not set the X-Service-
|
|
# Catalog header. (boolean value)
|
|
#include_service_catalog=true
|
|
|
|
# Used to control the use and type of token binding. Can be
|
|
# set to: "disabled" to not check token binding. "permissive"
|
|
# (default) to validate binding information if the bind type
|
|
# is of a form known to the server and ignore it if not.
|
|
# "strict" like "permissive" but if the bind type is unknown
|
|
# the token will be rejected. "required" any form of token
|
|
# binding is needed to be allowed. Finally the name of a
|
|
# binding method that must be present in tokens. (string
|
|
# value)
|
|
#enforce_token_bind=permissive
|
|
|
|
# If true, the revocation list will be checked for cached
|
|
# tokens. This requires that PKI tokens are configured on the
|
|
# identity server. (boolean value)
|
|
#check_revocations_for_cached=false
|
|
|
|
# Hash algorithms to use for hashing PKI tokens. This may be a
|
|
# single algorithm or multiple. The algorithms are those
|
|
# supported by Python standard hashlib.new(). The hashes will
|
|
# be tried in the order given, so put the preferred one first
|
|
# for performance. The result of the first hash will be stored
|
|
# in the cache. This will typically be set to multiple values
|
|
# only while migrating from a less secure algorithm to a more
|
|
# secure one. Once all the old tokens are expired this option
|
|
# should be set to a single value for better performance.
|
|
# (list value)
|
|
#hash_algorithms=md5
|
|
|
|
# Prefix to prepend at the beginning of the path. Deprecated,
|
|
# use identity_uri. (string value)
|
|
#auth_admin_prefix=
|
|
|
|
# Host providing the admin Identity API endpoint. Deprecated,
|
|
# use identity_uri. (string value)
|
|
#auth_host=127.0.0.1
|
|
|
|
# Port of the admin Identity API endpoint. Deprecated, use
|
|
# identity_uri. (integer value)
|
|
#auth_port=35357
|
|
|
|
# Protocol of the admin Identity API endpoint (http or https).
|
|
# Deprecated, use identity_uri. (string value)
|
|
#auth_protocol=https
|
|
|
|
# Complete admin Identity API endpoint. This should specify
|
|
# the unversioned root endpoint e.g. https://localhost:35357/
|
|
# (string value)
|
|
#identity_uri=<None>
|
|
|
|
# This option is deprecated and may be removed in a future
|
|
# release. Single shared secret with the Keystone
|
|
# configuration used for bootstrapping a Keystone
|
|
# installation, or otherwise bypassing the normal
|
|
# authentication process. This option should not be used, use
|
|
# `admin_user` and `admin_password` instead. (string value)
|
|
#admin_token=<None>
|
|
|
|
# Service username. (string value)
|
|
#admin_user=<None>
|
|
|
|
# Service user password. (string value)
|
|
#admin_password=<None>
|
|
|
|
# Service tenant name. (string value)
|
|
#admin_tenant_name=admin
|
|
|
|
|
|
[matchmaker_redis]
|
|
|
|
#
|
|
# Options defined in oslo.messaging
|
|
#
|
|
|
|
# Host to locate redis. (string value)
|
|
#host=127.0.0.1
|
|
|
|
# Use this port to connect to redis host. (integer value)
|
|
#port=6379
|
|
|
|
# Password for Redis server (optional). (string value)
|
|
#password=
|
|
|
|
|
|
[neutron]
|
|
|
|
#
|
|
# Options defined in ironic.dhcp.neutron
|
|
#
|
|
|
|
# URL for connecting to neutron. (string value)
|
|
#url=http://$my_ip:9696
|
|
|
|
# Timeout value for connecting to neutron in seconds. (integer
|
|
# value)
|
|
#url_timeout=30
|
|
|
|
# Client retries in the case of a failed request. (integer
|
|
# value)
|
|
#retries=3
|
|
|
|
# Default authentication strategy to use when connecting to
|
|
# neutron. Can be either "keystone" or "noauth". Running
|
|
# neutron in noauth mode (related to but not affected by this
|
|
# setting) is insecure and should only be used for testing.
|
|
# (string value)
|
|
#auth_strategy=keystone
|
|
|
|
# UUID of the network to create Neutron ports on when booting
|
|
# to a ramdisk for cleaning/zapping using Neutron DHCP (string
|
|
# value)
|
|
#cleaning_network_uuid=<None>
|
|
|
|
|
|
[oneview]
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.oneview.common
|
|
#
|
|
|
|
# URL where OneView is available (string value)
|
|
#manager_url=<None>
|
|
|
|
# OneView username to be used (string value)
|
|
#username=<None>
|
|
|
|
# OneView password to be used (string value)
|
|
#password=<None>
|
|
|
|
# Option to allow insecure connection with OneView (boolean
|
|
# value)
|
|
#allow_insecure_connections=false
|
|
|
|
# Path to CA certificate (string value)
|
|
#tls_cacert_file=<None>
|
|
|
|
# Max connection retries to check changes on OneView (integer
|
|
# value)
|
|
#max_polling_attempts=12
|
|
|
|
|
|
[oslo_concurrency]
|
|
|
|
#
|
|
# Options defined in oslo.concurrency
|
|
#
|
|
|
|
# Enables or disables inter-process locks. (boolean value)
|
|
#disable_process_locking=false
|
|
|
|
# Directory to use for lock files. For security, the
|
|
# specified directory should only be writable by the user
|
|
# running the processes that need locking. Defaults to
|
|
# environment variable OSLO_LOCK_PATH. If external locks are
|
|
# used, a lock path must be set. (string value)
|
|
#lock_path=<None>
|
|
|
|
|
|
[oslo_messaging_amqp]
|
|
|
|
#
|
|
# Options defined in oslo.messaging
|
|
#
|
|
|
|
# address prefix used when sending to a specific server
|
|
# (string value)
|
|
#server_request_prefix=exclusive
|
|
|
|
# address prefix used when broadcasting to all servers (string
|
|
# value)
|
|
#broadcast_prefix=broadcast
|
|
|
|
# address prefix when sending to any server in group (string
|
|
# value)
|
|
#group_request_prefix=unicast
|
|
|
|
# Name for the AMQP container (string value)
|
|
#container_name=<None>
|
|
|
|
# Timeout for inactive connections (in seconds) (integer
|
|
# value)
|
|
#idle_timeout=0
|
|
|
|
# Debug: dump AMQP frames to stdout (boolean value)
|
|
#trace=false
|
|
|
|
# CA certificate PEM file to verify server certificate (string
|
|
# value)
|
|
#ssl_ca_file=
|
|
|
|
# Identifying certificate PEM file to present to clients
|
|
# (string value)
|
|
#ssl_cert_file=
|
|
|
|
# Private key PEM file used to sign cert_file certificate
|
|
# (string value)
|
|
#ssl_key_file=
|
|
|
|
# Password for decrypting ssl_key_file (if encrypted) (string
|
|
# value)
|
|
#ssl_key_password=<None>
|
|
|
|
# Accept clients using either SSL or plain TCP (boolean value)
|
|
#allow_insecure_clients=false
|
|
|
|
# Space separated list of acceptable SASL mechanisms (string
|
|
# value)
|
|
#sasl_mechanisms=
|
|
|
|
# Path to directory that contains the SASL configuration
|
|
# (string value)
|
|
#sasl_config_dir=
|
|
|
|
# Name of configuration file (without .conf suffix) (string
|
|
# value)
|
|
#sasl_config_name=
|
|
|
|
# User name for message broker authentication (string value)
|
|
#username=
|
|
|
|
# Password for message broker authentication (string value)
|
|
#password=
|
|
|
|
|
|
[oslo_messaging_qpid]
|
|
|
|
#
|
|
# Options defined in oslo.messaging
|
|
#
|
|
|
|
# Use durable queues in AMQP. (boolean value)
|
|
# Deprecated group/name - [DEFAULT]/amqp_durable_queues
|
|
# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
|
|
#amqp_durable_queues=false
|
|
|
|
# Auto-delete queues in AMQP. (boolean value)
|
|
#amqp_auto_delete=false
|
|
|
|
# Send a single AMQP reply to call message. The current
|
|
# behaviour since oslo-incubator is to send two AMQP replies -
|
|
# first one with the payload, a second one to ensure the other
|
|
# have finish to send the payload. We are going to remove it
|
|
# in the N release, but we must keep backward compatible at
|
|
# the same time. This option provides such compatibility - it
|
|
# defaults to False in Liberty and can be turned on for early
|
|
# adopters with a new installations or for testing. Please
|
|
# note, that this option will be removed in the Mitaka
|
|
# release. (boolean value)
|
|
#send_single_reply=false
|
|
|
|
# Qpid broker hostname. (string value)
|
|
#qpid_hostname=localhost
|
|
|
|
# Qpid broker port. (integer value)
|
|
#qpid_port=5672
|
|
|
|
# Qpid HA cluster host:port pairs. (list value)
|
|
#qpid_hosts=$qpid_hostname:$qpid_port
|
|
|
|
# Username for Qpid connection. (string value)
|
|
#qpid_username=
|
|
|
|
# Password for Qpid connection. (string value)
|
|
#qpid_password=
|
|
|
|
# Space separated list of SASL mechanisms to use for auth.
|
|
# (string value)
|
|
#qpid_sasl_mechanisms=
|
|
|
|
# Seconds between connection keepalive heartbeats. (integer
|
|
# value)
|
|
#qpid_heartbeat=60
|
|
|
|
# Transport to use, either 'tcp' or 'ssl'. (string value)
|
|
#qpid_protocol=tcp
|
|
|
|
# Whether to disable the Nagle algorithm. (boolean value)
|
|
#qpid_tcp_nodelay=true
|
|
|
|
# The number of prefetched messages held by receiver. (integer
|
|
# value)
|
|
#qpid_receiver_capacity=1
|
|
|
|
# The qpid topology version to use. Version 1 is what was
|
|
# originally used by impl_qpid. Version 2 includes some
|
|
# backwards-incompatible changes that allow broker federation
|
|
# to work. Users should update to version 2 when they are
|
|
# able to take everything down, as it requires a clean break.
|
|
# (integer value)
|
|
#qpid_topology_version=1
|
|
|
|
|
|
[oslo_messaging_rabbit]
|
|
|
|
#
|
|
# Options defined in oslo.messaging
|
|
#
|
|
|
|
# Use durable queues in AMQP. (boolean value)
|
|
# Deprecated group/name - [DEFAULT]/amqp_durable_queues
|
|
# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
|
|
#amqp_durable_queues=false
|
|
|
|
# Auto-delete queues in AMQP. (boolean value)
|
|
#amqp_auto_delete=false
|
|
|
|
# Send a single AMQP reply to call message. The current
|
|
# behaviour since oslo-incubator is to send two AMQP replies -
|
|
# first one with the payload, a second one to ensure the other
|
|
# have finish to send the payload. We are going to remove it
|
|
# in the N release, but we must keep backward compatible at
|
|
# the same time. This option provides such compatibility - it
|
|
# defaults to False in Liberty and can be turned on for early
|
|
# adopters with a new installations or for testing. Please
|
|
# note, that this option will be removed in the Mitaka
|
|
# release. (boolean value)
|
|
#send_single_reply=false
|
|
|
|
# SSL version to use (valid only if SSL enabled). Valid values
|
|
# are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may
|
|
# be available on some distributions. (string value)
|
|
#kombu_ssl_version=
|
|
|
|
# SSL key file (valid only if SSL enabled). (string value)
|
|
#kombu_ssl_keyfile=
|
|
|
|
# SSL cert file (valid only if SSL enabled). (string value)
|
|
#kombu_ssl_certfile=
|
|
|
|
# SSL certification authority file (valid only if SSL
|
|
# enabled). (string value)
|
|
#kombu_ssl_ca_certs=
|
|
|
|
# How long to wait before reconnecting in response to an AMQP
|
|
# consumer cancel notification. (floating point value)
|
|
#kombu_reconnect_delay=1.0
|
|
|
|
# How long to wait before considering a reconnect attempt to
|
|
# have failed. This value should not be longer than
|
|
# rpc_response_timeout. (integer value)
|
|
#kombu_reconnect_timeout=60
|
|
|
|
# The RabbitMQ broker address where a single node is used.
|
|
# (string value)
|
|
#rabbit_host=localhost
|
|
|
|
# The RabbitMQ broker port where a single node is used.
|
|
# (integer value)
|
|
#rabbit_port=5672
|
|
|
|
# RabbitMQ HA cluster host:port pairs. (list value)
|
|
#rabbit_hosts=$rabbit_host:$rabbit_port
|
|
|
|
# Connect over SSL for RabbitMQ. (boolean value)
|
|
#rabbit_use_ssl=false
|
|
|
|
# The RabbitMQ userid. (string value)
|
|
#rabbit_userid=guest
|
|
|
|
# The RabbitMQ password. (string value)
|
|
#rabbit_password=guest
|
|
|
|
# The RabbitMQ login method. (string value)
|
|
#rabbit_login_method=AMQPLAIN
|
|
|
|
# The RabbitMQ virtual host. (string value)
|
|
#rabbit_virtual_host=/
|
|
|
|
# How frequently to retry connecting with RabbitMQ. (integer
|
|
# value)
|
|
#rabbit_retry_interval=1
|
|
|
|
# How long to backoff for between retries when connecting to
|
|
# RabbitMQ. (integer value)
|
|
#rabbit_retry_backoff=2
|
|
|
|
# Maximum number of RabbitMQ connection retries. Default is 0
|
|
# (infinite retry count). (integer value)
|
|
#rabbit_max_retries=0
|
|
|
|
# Use HA queues in RabbitMQ (x-ha-policy: all). If you change
|
|
# this option, you must wipe the RabbitMQ database. (boolean
|
|
# value)
|
|
#rabbit_ha_queues=false
|
|
|
|
# Number of seconds after which the Rabbit broker is
|
|
# considered down if heartbeat's keep-alive fails (0 disable
|
|
# the heartbeat). EXPERIMENTAL (integer value)
|
|
#heartbeat_timeout_threshold=60
|
|
|
|
# How often times during the heartbeat_timeout_threshold we
|
|
# check the heartbeat. (integer value)
|
|
#heartbeat_rate=2
|
|
|
|
# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
|
|
# (boolean value)
|
|
#fake_rabbit=false
|
|
|
|
|
|
[oslo_policy]
|
|
|
|
#
|
|
# Options defined in oslo.policy
|
|
#
|
|
|
|
# The JSON file that defines policies. (string value)
|
|
#policy_file=policy.json
|
|
|
|
# Default rule. Enforced when a requested rule is not found.
|
|
# (string value)
|
|
#policy_default_rule=default
|
|
|
|
# Directories where policy configuration files are stored.
|
|
# They can be relative to any directory in the search path
|
|
# defined by the config_dir option, or absolute paths. The
|
|
# file defined by policy_file must exist for these directories
|
|
# to be searched. Missing or empty directories are ignored.
|
|
# (multi valued)
|
|
#policy_dirs=policy.d
|
|
|
|
|
|
[pxe]
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.iscsi_deploy
|
|
#
|
|
|
|
# Additional append parameters for baremetal PXE boot. (string
|
|
# value)
|
|
#pxe_append_params=nofb nomodeset vga=normal
|
|
|
|
# Default file system format for ephemeral partition, if one
|
|
# is created. (string value)
|
|
#default_ephemeral_format=ext4
|
|
|
|
# On the ironic-conductor node, directory where images are
|
|
# stored on disk. (string value)
|
|
#images_path=/var/lib/ironic/images/
|
|
|
|
# On the ironic-conductor node, directory where master
|
|
# instance images are stored on disk. (string value)
|
|
#instance_master_path=/var/lib/ironic/master_images
|
|
|
|
# Maximum size (in MiB) of cache for master images, including
|
|
# those in use. (integer value)
|
|
#image_cache_size=20480
|
|
|
|
# Maximum TTL (in minutes) for old master images in cache.
|
|
# (integer value)
|
|
#image_cache_ttl=10080
|
|
|
|
# The disk devices to scan while doing the deploy. (string
|
|
# value)
|
|
#disk_devices=cciss/c0d0,sda,hda,vda
|
|
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.pxe
|
|
#
|
|
|
|
# On ironic-conductor node, template file for PXE
|
|
# configuration. (string value)
|
|
#pxe_config_template=$pybasedir/drivers/modules/pxe_config.template
|
|
|
|
# On ironic-conductor node, template file for PXE
|
|
# configuration for UEFI boot loader. (string value)
|
|
#uefi_pxe_config_template=$pybasedir/drivers/modules/elilo_efi_pxe_config.template
|
|
|
|
# IP address of ironic-conductor node's TFTP server. (string
|
|
# value)
|
|
#tftp_server=$my_ip
|
|
|
|
# ironic-conductor node's TFTP root path. The ironic-conductor
|
|
# must have read/write access to this path. (string value)
|
|
#tftp_root=/tftpboot
|
|
|
|
# On ironic-conductor node, directory where master TFTP images
|
|
# are stored on disk. (string value)
|
|
#tftp_master_path=/tftpboot/master_images
|
|
|
|
# Bootfile DHCP parameter. (string value)
|
|
#pxe_bootfile_name=pxelinux.0
|
|
|
|
# Bootfile DHCP parameter for UEFI boot mode. (string value)
|
|
#uefi_pxe_bootfile_name=elilo.efi
|
|
|
|
# Enable iPXE boot. (boolean value)
|
|
#ipxe_enabled=false
|
|
|
|
# On ironic-conductor node, the path to the main iPXE script
|
|
# file. (string value)
|
|
#ipxe_boot_script=$pybasedir/drivers/modules/boot.ipxe
|
|
|
|
# The IP version that will be used for PXE booting. Can be
|
|
# either 4 or 6. Defaults to 4. EXPERIMENTAL (string value)
|
|
#ip_version=4
|
|
|
|
|
|
[seamicro]
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.seamicro
|
|
#
|
|
|
|
# Maximum retries for SeaMicro operations (integer value)
|
|
#max_retry=3
|
|
|
|
# Seconds to wait for power action to be completed (integer
|
|
# value)
|
|
#action_timeout=10
|
|
|
|
|
|
[snmp]
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.snmp
|
|
#
|
|
|
|
# Seconds to wait for power action to be completed (integer
|
|
# value)
|
|
#power_timeout=10
|
|
|
|
# Time (in seconds) to sleep between when rebooting (powering
|
|
# off and on again) (integer value)
|
|
#reboot_delay=0
|
|
|
|
|
|
[ssh]
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.ssh
|
|
#
|
|
|
|
# libvirt URI. (string value)
|
|
#libvirt_uri=qemu:///system
|
|
|
|
# Number of attempts to try to get VM name used by the host
|
|
# that corresponds to a node's MAC address. (integer value)
|
|
#get_vm_name_attempts=3
|
|
|
|
# Number of seconds to wait between attempts to get VM name
|
|
# used by the host that corresponds to a node's MAC address.
|
|
# (integer value)
|
|
#get_vm_name_retry_interval=3
|
|
|
|
|
|
[swift]
|
|
|
|
#
|
|
# Options defined in ironic.common.swift
|
|
#
|
|
|
|
# Maximum number of times to retry a Swift request, before
|
|
# failing. (integer value)
|
|
#swift_max_retries=2
|
|
|
|
|
|
[virtualbox]
|
|
|
|
#
|
|
# Options defined in ironic.drivers.modules.virtualbox
|
|
#
|
|
|
|
# Port on which VirtualBox web service is listening. (integer
|
|
# value)
|
|
#port=18083
|
|
|
|
|