Synchronise configuration file defaults with kayobe

etc/kayobe/bifrost.yml

@@ -59,6 +59,10 @@
 # Ironic inspector IPMI password to set.
 #kolla_bifrost_inspector_ipmi_password:
 
+# Ironic inspector network interface name on which to check for an LLDP switch
+# port description to use as the node's name.
+#kolla_bifrost_inspector_lldp_switch_port_interface:
+
 # Ironic inspector deployment kernel location.
 #kolla_bifrost_inspector_deploy_kernel:
 

etc/kayobe/bmc.yml

@@ -0,0 +1,19 @@
+---
+###############################################################################
+# Configuration of Baseboard Management Controllers (BMCs).
+
+# Type of host's BMC. Currently only idrac is supported.
+#bmc_type:
+
+# Address to use to access a host's BMC via IPMI.
+#ipmi_address:
+
+# Username to use to access a host's BMC via IPMI.
+#ipmi_username:
+
+# Password to use to access a host's BMC via IPMI.
+#ipmi_password:
+
+###############################################################################
+# Dummy variable to allow Ansible to accept this file.
+workaround_ansible_issue_8743: yes

etc/kayobe/controllers.yml

@@ -15,6 +15,36 @@
 # List of extra networks to which controller nodes are attached.
 #controller_extra_network_interfaces:
 
+###############################################################################
+# Controller node BIOS configuration.
+
+# Dict of controller BIOS options. Format is same as that used by stackhpc.drac
+# role.
+#controller_bios_config:
+
+# Dict of default controller BIOS options. Format is same as that used by
+# stackhpc.drac role.
+#controller_bios_config_default:
+
+# Dict of additional controller BIOS options. Format is same as that used by
+# stackhpc.drac role.
+#controller_bios_config_extra:
+
+###############################################################################
+# Controller node RAID configuration.
+
+# List of controller RAID volumes. Format is same as that used by stackhpc.drac
+# role.
+#controller_raid_config:
+
+# List of default controller RAID volumes. Format is same as that used by
+# stackhpc.drac role.
+#controller_raid_config_default:
+
+# List of additional controller RAID volumes. Format is same as that used by
+# stackhpc.drac role.
+#controller_raid_config_extra:
+
 ###############################################################################
 # Controller node LVM configuration.
 

etc/kayobe/dell-switch-bmp.yml

@@ -0,0 +1,16 @@
+---
+# Dell Switch Bare Metal Provisioning (BMP) configuration.
+
+# List of images to provide a BMP configuration for.
+# Each item should be a dict with the following keys:
+# url: URL of the image to download.
+# dest: Name of the file to download the image to.
+# match: dnsmasq match rule to match hosts against.
+# tag: dnsmasq tag to apply to matching hosts.
+# checksum: optional checksum of image, in format required for Ansible's
+#           get_url module.
+#dell_switch_bmp_images:
+
+###############################################################################
+# Dummy variable to allow Ansible to accept this file.
+workaround_ansible_issue_8743: yes

etc/kayobe/idrac.yml

@@ -0,0 +1,46 @@
+---
+###############################################################################
+# iDRAC configuration.
+
+# Default username for iDRACs.
+#idrac_default_username:
+
+# Default password for iDRACs.
+#idrac_default_password:
+
+# Default IP address for iDRACs.
+#idrac_default_ip:
+
+# Dict mapping host description (as found in switch interface configuration) to
+# IP address of the iDRAC for that host.
+#idrac_network_ips:
+
+# Gateway IP address for iDRAC network.
+#idrac_network_gateway:
+
+# IP netmask for iDRAC network.
+#idrac_network_netmask:
+
+# VLAN for iDRAC network.
+#idrac_network_vlan:
+
+# ID of VLAN to use for bootstrapping iDRACs.
+#idrac_bootstrap_vlan:
+
+# Name of network namespace on controller to use for bootstrapping iDRACs.
+#idrac_bootstrap_net_namespace:
+
+# Controller group to use for bootstrapping iDRACs.
+#idrac_bootstrap_controller_group:
+
+# Base network interface on controller to use for bootstrapping iDRACs.
+#idrac_bootstrap_controller_interface:
+
+# VLAN network interface on controller to create for bootstrapping iDRACs.
+#idrac_bootstrap_controller_vlan_interface:
+
+# IP address of controller to use for bootstrapping iDRACs.
+#idrac_bootstrap_controller_ip:
+
+# Name of an Ansible group containing switches forming the iDRAC network.
+#idrac_bootstrap_switch_group:

etc/kayobe/inspector.yml

@@ -17,7 +17,13 @@
 # Whether inspector should manage the firewall.
 #inspector_manage_firewall:
 
-# List of of inspector processing plugins.
+# List of of default inspector processing plugins.
+#inspector_processing_hooks_default:
+
+# List of of additional inspector processing plugins.
+#inspector_processing_hooks_extra:
+
+# List of of additional inspector processing plugins.
 #inspector_processing_hooks:
 
 # Which MAC addresses to add as ports during introspection. One of 'all',
@@ -67,19 +73,38 @@
 # Ironic inspector rule to set the interface on which the node PXE booted.
 #inspector_rule_set_pxe_interface_mac:
 
-# Ironic inspector rule to set the node's name from eno3's LLDP switch port
+# Ironic inspector rule to set the node's name from an interface's LLDP switch
-# description.
+# port description.
-#inspector_rule_eno3_lldp_switch_port_desc_to_name:
+#inspector_rule_lldp_switch_port_desc_to_name:
 
 # Ironic inspector rule to save introspection data to the node.
 #inspector_rule_save_data:
 
+# List of default ironic insepctor rules.
+#inspector_rules_default:
+
 # List of additional ironic inspector rules.
 #inspector_rules_extra:
 
 # List of all ironic inspector rules.
 #inspector_rules:
 
+###############################################################################
+# Dell switch LLDP workaround configuration.
+
+# Some Dell switch OSs (including Dell Network OS 9.10(0.1)) do not support
+# sending interface port description TLVs correctly. Instead of sending the
+# interface description, they send the interface name (e.g. TenGigabitEthernet
+# 1/1/1). This breaks the discovery process which relies on Ironic node
+# introspection data containing the node's name in the interface port
+# description. We work around this here by creating an introspection rule for
+# each ironic node that matches against the switch system and the relevant
+# interface name, then sets the node's name appropriately.
+
+# Ansible group containing switch hosts to which the workaround should be
+# applied.
+#inspector_dell_switch_lldp_workaround_group:
+
 ###############################################################################
 # Dummy variable to allow Ansible to accept this file.
 workaround_ansible_issue_8743: yes

etc/kayobe/inventory/group_vars/switches/interfaces

@@ -5,16 +5,8 @@
 # Interface configuration.
 
 # Interface configuration. Dict mapping switch interface names to configuration
-# dicts. Each dict contains a description item and the name of a network which
+# dicts. Each dict contains a description item and a 'config' item which should
-# is used to lookup a variable containing interface config for ports on that
+# contain a list of per-interface configuration.
-# network (switch_interface_config_<network>). Each dict can also have a 
-# 'config' item which should contain a list of additional per-interface
-# configuration.
 # Generally this should be configured on a per-switch basis via a host_vars
 # file.
 switch_interface_config: {}
-
-# Example of an interface configuration variable for a network, referenced by
-# the 'network' item of an interface in 'switch_interface_config'.
-#switch_interface_config_example_net:
-#  - switchport access vlan 42

etc/kayobe/ipa.yml

@@ -0,0 +1,33 @@
+---
+# Ironic Python Agent (IPA) configuration.
+
+###############################################################################
+# Ironic Python Agent (IPA) images configuration.
+
+# Name of Ironic deployment kernel image to register in Glance.
+#ipa_images_kernel_name:
+
+# URL of Ironic deployment kernel image to download.
+#ipa_images_kernel_url:
+
+# Name of Ironic deployment ramdisk image to register in Glance.
+#ipa_images_ramdisk_name:
+
+# URL of Ironic deployment ramdisk image to download.
+#ipa_images_ramdisk_url:
+
+###############################################################################
+# Ironic Python Agent (IPA) deployment configuration.
+
+# List of extra kernel parameters to enable LLDP collection.
+#ipa_kernel_options_collect_lldp:
+
+# List of extra kernel parameters to enable all inspector collectors.
+#ipa_kernel_options_inspection_collectors_all:
+
+# List of extra kernel parameters to enable all inspector benchmarks.
+#ipa_kernel_options_inspection_benchmarks_all:
+
+###############################################################################
+# Dummy variable to allow Ansible to accept this file.
+workaround_ansible_issue_8743: yes

etc/kayobe/ironic.yml

@@ -0,0 +1,104 @@
+---
+###############################################################################
+# Ironic configuration.
+
+# List of enabled Ironic drivers.
+#kolla_ironic_drivers:
+
+# Specify the list of hardware types to load during service initialization.
+#kolla_ironic_enabled_hardware_types:
+
+# Specify the list of boot interfaces to load during service initialization.
+#kolla_ironic_enabled_boot_interfaces:
+
+# Default boot interface to be used for nodes that do not have boot_interface
+# field set.
+#kolla_ironic_default_boot_interface:
+
+# Specify the list of console interfaces to load during service initialization.
+#kolla_ironic_enabled_console_interfaces:
+
+# Default console interface to be used for nodes that do not have
+# console_interface field set.
+#kolla_ironic_default_console_interface:
+
+# Specify the list of deploy interfaces to load during service initialization.
+#kolla_ironic_enabled_deploy_interfaces:
+
+# Default deploy interface to be used for nodes that do not have
+# deploy_interface field set.
+#kolla_ironic_default_deploy_interface:
+
+# Specify the list of inspect interfaces to load during service initialization.
+#kolla_ironic_enabled_inspect_interfaces:
+
+# Default inspect interface to be used for nodes that do not have
+# inspect_interface field set.
+#kolla_ironic_default_inspect_interface:
+
+# Specify the list of management interfaces to load during service
+# initialization.
+#kolla_ironic_enabled_management_interfaces:
+
+# Default management interface to be used for nodes that do not have
+# management_interface field set.
+#kolla_ironic_default_management_interface:
+
+# Specify the list of network interfaces to load during service initialization.
+#kolla_ironic_enabled_network_interfaces:
+
+# Default network interface to be used for nodes that do not have
+# network_interface field set.
+#kolla_ironic_default_network_interface:
+
+# Specify the list of power interfaces to load during service initialization.
+#kolla_ironic_enabled_power_interfaces:
+
+# Default power interface to be used for nodes that do not have power_interface
+# field set.
+#kolla_ironic_default_power_interface:
+
+# Specify the list of raid interfaces to load during service initialization.
+#kolla_ironic_enabled_raid_interfaces:
+
+# Default raid interface to be used for nodes that do not have
+# raid_interface field set.
+#kolla_ironic_default_raid_interface:
+
+# Specify the list of storage interfaces to load during
+# service initialization.
+#kolla_ironic_enabled_storage_interfaces:
+
+# Default storage interface to be used for nodes that do not
+# have storage_interface field set.
+#kolla_ironic_default_storage_interface:
+
+# Specify the list of vendor interfaces to load during service initialization.
+#kolla_ironic_enabled_vendor_interfaces:
+
+# Default vendor interface to be used for nodes that do not have
+# vendor_interface field set.
+#kolla_ironic_default_vendor_interface:
+
+# Default boot option to use when no boot option is requested in node's
+# driver_info.
+#kolla_ironic_default_boot_option:
+
+# Name of the Neutron network to use for cleaning.
+#kolla_ironic_cleaning_network:
+
+# Name of the Neutron network to use for provisioning.
+#kolla_ironic_provisioning_network:
+
+# List of default kernel parameters to append for baremetal PXE boot.
+#kolla_ironic_pxe_append_params_default:
+
+# List of additional kernel parameters to append for baremetal PXE boot.
+#kolla_ironic_pxe_append_params_extra:
+
+# List of kernel parameters to append for baremetal PXE boot.
+#kolla_ironic_pxe_append_params:
+
+###############################################################################
+# Dummy variable to allow Ansible to accept this file.
+workaround_ansible_issue_8743: yes

etc/kayobe/kolla.yml

@@ -49,6 +49,12 @@
 #     reference: master
 #kolla_sources:
 
+###############################################################################
+# Kolla image build configuration.
+
+# Dict mapping Jinja2 block names in kolla's Docker images to their contents.
+#kolla_build_blocks:
+
 ###############################################################################
 # Kolla-ansible configuration.
 

etc/kayobe/networks.yml

@@ -36,15 +36,23 @@
 # provision_oc_net_cidr:
 # provision_oc_net_allocation_pool_start:
 # provision_oc_net_allocation_pool_end:
+# provision_oc_net_inspection_allocation_pool_start:
+# provision_oc_net_inspection_allocation_pool_end:
 # provision_oc_net_gateway:
 # provision_oc_net_vlan:
+# provision_oc_net_mtu:
 
 # Workload provisioning network IP information.
 # provision_wl_net_cidr:
 # provision_wl_net_allocation_pool_start:
 # provision_wl_net_allocation_pool_end:
+# provision_wl_net_inspection_allocation_pool_start:
+# provision_wl_net_inspection_allocation_pool_end:
+# provision_wl_net_neutron_allocation_pool_start:
+# provision_wl_net_neutron_allocation_pool_end:
 # provision_wl_net_gateway:
 # provision_wl_net_vlan:
+# provision_wl_net_mtu:
 
 # Internal network IP information.
 # internal_net_vip_address:
@@ -54,6 +62,7 @@
 # internal_net_allocation_pool_end:
 # internal_net_gateway:
 # internal_net_vlan:
+# internal_net_mtu:
 
 # External network IP information.
 # external_net_vip_address:
@@ -61,8 +70,11 @@
 # external_net_cidr:
 # external_net_allocation_pool_start:
 # external_net_allocation_pool_end:
+# external_net_neutron_allocation_pool_start:
+# external_net_neutron_allocation_pool_end:
 # external_net_gateway:
 # external_net_vlan:
+# external_net_mtu:
 
 # Storage network IP information.
 # storage_net_cidr:
@@ -70,6 +82,7 @@
 # storage_net_allocation_pool_end:
 # storage_net_gateway:
 # storage_net_vlan:
+# storage_net_mtu:
 
 # Storage management network IP information.
 # storage_mgmt_net_cidr:
@@ -77,6 +90,7 @@
 # storage_mgmt_net_allocation_pool_end:
 # storage_mgmt_net_gateway:
 # storage_mgmt_net_vlan:
+# storage_mgmt_net_mtu:
 
 ###############################################################################
 # Network virtual patch link configuration.

etc/kayobe/neutron.yml

@@ -0,0 +1,45 @@
+---
+###############################################################################
+# Neutron configuration.
+
+# List of Neutron ML2 mechanism drivers to use.
+#kolla_neutron_ml2_mechanism_drivers:
+
+# List of Neutron ML2 type drivers to use.
+#kolla_neutron_ml2_type_drivers:
+
+# List of Neutron ML2 tenant network types to use.
+#kolla_neutron_ml2_tenant_network_types:
+
+# List of Neutron ML2 network VLAN ranges to use. Each item should be a dict
+# containing the following items:
+# physical_network: The physical network
+# min: Minimum of allowed VLAN range (optional)
+# max: Maximum of allowed VLAN range (optional)
+#kolla_neutron_ml2_network_vlan_ranges:
+
+# List of switches to configure for use by genericswitch ML2 mechanism driver.
+# Each item should be a dict containing the following items:
+# name: Hostname of the switch
+# ip: IP address on which to reach the switch
+# username: SSH username
+# password: SSH password (optional)
+# key_file: SSH key file (optional)
+# secret: SSH secret (optional)
+#kolla_neutron_ml2_generic_switches:
+
+# List of Ansible hosts representing switches to configure for use by
+# genericswitch ML2 mechanism driver. These switches will be appended to
+# kolla_neutron_ml2_generic_switches and their configuration will be determined
+# by the following host variables:
+# name: inventory_hostname
+# ip: ansible_host
+# username: ansible_user
+# password: ansible_ssh_pass
+# key_file: not currently supported
+# secret: not currently supported
+#kolla_neutron_ml2_generic_switch_hosts:
+
+###############################################################################
+# Dummy variable to allow Ansible to accept this file.
+workaround_ansible_issue_8743: yes