diff --git a/doc/source/usage.rst b/doc/source/usage.rst index 9b4f58e49..4dfad47db 100644 --- a/doc/source/usage.rst +++ b/doc/source/usage.rst @@ -12,13 +12,64 @@ the bare metal nodes that will form the workload node pool. Configuration ============= +As an Ansible-based project, Kayobe is for the most part configured using YAML +files. + +Configuration Location +---------------------- + Kayobe configuration is by default located in ``/etc/kayobe`` on the Ansible -control host. This can be overridden to a different location to avoid touching -the system configuration directory by setting the environment variable +control host. This location can be overridden to a different location to avoid +touching the system configuration directory by setting the environment variable ``KAYOBE_CONFIG_PATH``. Similarly, kolla configuration on the Ansible control host will by default be located in ``/etc/kolla`` and can be overridden via ``KOLLA_CONFIG_PATH``. +Configuration Directory Layout +------------------------------ + +The Kayobe configuration directory contains Ansible ``extra-vars`` files and +the Ansible inventory. An example of the directory structure is as follows:: + + extra-vars1.yml + extra-vars2.yml + inventory/ + group_vars/ + group1-vars + group2-vars + groups + host_vars/ + host1-vars + host2-vars + hosts + +Configuration Patterns +---------------------- + +Ansible's variable precedence rules are `fairly well documented +`_ +and provide a mechanism we can use for providing site localisation and +customisation of OpenStack in combination with some reasonable default values. +For global configuration options, Kayobe typically uses the following patterns: + +- Playbook group variables for the *all* group in + ``/ansible/group_vars/all/*`` set **global defaults**. These + files should not be modified. +- Playbook group variables for other groups in + ``/ansible/group_vars//*`` set **defaults for some subsets + of hosts**. These files should not be modified. +- Extra-vars files in ``${KAYOBE_CONFIG_PATH}/*.yml`` set **custom values + for global variables** and should be used to apply global site localisation + and customisation. By default these variables are commented out. + +Additionally, variables can be set on a per-host basis using inventory host +variables files in ``${KAYOBE_CONFIG_PATH}/inventory/host_vars/*``. It should +be noted that variables set in extra-vars files take precedence over per-host +variables. + +Configuring Kayobe +------------------ + From a checkout of the Kayobe repository, the baseline Kayobe configuration should be copied to the Kayobe configuration path:: @@ -27,6 +78,30 @@ should be copied to the Kayobe configuration path:: Once in place, each of the YAML and inventory files should be manually inspected and configured as required. +Inventory +^^^^^^^^^ + +The inventory should contain the following hosts: + +Control host + This should be localhost and should be a member of the ``config-mgmt`` + group. +Seed hypervisor + If provisioning a seed VM, a host should exist for the hypervisor that + will run the VM, and should be a member of the ``seed-hypervisor`` group. +Seed + The seed host, whether provisioned as a VM by Kayobe or externally managed, + should exist in the ``seed`` group. + +Cloud hosts and bare metal compute hosts are not required to exist in the +inventory. + +Site Localisation and Customisation +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Site localisation and customisation is applied using Ansible extra-vars files +in ``${KAYOBE_CONFIG_PATH}/*.yml``. + Command Line Interface ====================== @@ -68,9 +143,31 @@ To bootstrap the Ansible control host:: (kayobe-venv) $ kayobe control host bootstrap +Physical Network +================ + +The physical network can be managed by Kayobe, which uses Ansible's network +modules. Currently Dell Network OS 6 and Dell Network OS 9 switches are +supported but this could easily be extended. To provision the physical +network:: + + (kayobe-venv) $ kayobe physical network configure --group + +The ``--group`` argument is used to specify an Ansible group containing +the switches to be configured. + Seed ==== +VM Provisioning +--------------- + +.. note:: + + It is not necesary to run the seed services in a VM. To use an existing + bare metal host or a VM provisioned outside of Kayobe, this step may be + skipped. Ensure that the Ansible inventory contains a host for the seed. + The seed hypervisor should have CentOS and ``libvirt`` installed. It should have ``libvirt`` networks configured for all networks that the seed VM needs access to and a ``libvirt`` storage pool available for the seed VM's volumes. @@ -81,10 +178,8 @@ To provision the seed VM:: When this command has completed the seed VM should be active and accessible via SSH. Kayobe will update the Ansible inventory with the IP address of the VM. -At this point the seed services need to be deployed on the seed VM. These -services include Docker and the kolla ``bifrost-deploy`` container. This -command will also build the Operating System image that will be used to deploy -the overcloud nodes using Disk Image Builder (DIB). +Host Configuration +------------------ To configure the seed host OS:: @@ -98,6 +193,14 @@ To configure the seed host OS:: (kayobe-venv) $ kayobe seed host configure --wipe-disks +Building Container Images +------------------------- + +.. note:: + + It is possible to use prebuilt container images from an image registry such + as Dockerhub. In this case, this step can be skipped. + It is possible to use prebuilt container images from an image registry such as Dockerhub. In some cases it may be necessary to build images locally either to apply local image customisation or to use a downstream version of kolla. To @@ -105,16 +208,24 @@ build images locally:: (kayobe-venv) $ kayobe seed container image build +Deploying Containerised Services +-------------------------------- + +At this point the seed services need to be deployed on the seed VM. These +services are deployed in the ``bifrost_deploy`` container. This command will +also build the Operating System image that will be used to deploy the overcloud +nodes using Disk Image Builder (DIB). + To deploy the seed services in containers:: (kayobe-venv) $ kayobe seed service deploy After this command has completed the seed services will be active. -Accessing the Seed via SSH --------------------------- +Accessing the Seed via SSH (Optional) +------------------------------------- -For SSH access to the seed VM, first determine the seed VM's IP address. We can +For SSH access to the seed, first determine the seed's IP address. We can use the ``kayobe configuration dump`` command to inspect the seed's IP address:: @@ -137,18 +248,55 @@ Leave the seed VM and return to the shell on the control host:: Overcloud ========= +Discovery +--------- + .. note:: - Automated discovery of the overcloud nodes is not currently documented. + If discovery of the overcloud is not possible, a static inventory of servers + using the bifrost ``servers.yml`` file format may be configured using the + ``kolla_bifrost_servers`` variable in ``${KAYOBE_CONFIG_PATH}/bifrost.yml``. -Provisioning of the overcloud is performed by bifrost running in a container on -the seed. A static inventory of servers may be configured using the -``kolla_bifrost_servers`` variable. To provision the overcloud nodes:: +Discovery of the overcloud is supported by the ironic inspector service running +in the ``bifrost_deploy`` container on the seed. The service is configured to +PXE boot unrecognised MAC addresses with an IPA ramdisk for introspection. If +an introspected node does not exist in the ironic inventory, ironic inspector +will create a new entry for it. + +Discovery of the overcloud is triggered by causing the nodes to PXE boot using +a NIC attached to the overcloud provisioning network. For many servers this +will be the factory default and can be performed by powering them on. + +On completion of the discovery process, the overcloud nodes should be +registered with the ironic service running in the seed host's +``bifrost_deploy`` container. The node inventory can be viewed by executing +the following on the seed:: + + $ docker exec -it bifrost_deploy bash + (bifrost_deploy) $ source env-vars + (bifrost_deploy) $ ironic node-list + +In order to interact with these nodes using Kayobe, run the following command +to add them to the Kayobe and bifrost Ansible inventories:: + + (kayobe-venv) $ kayobe overcloud inventory discover + +Provisioning +------------ + +Provisioning of the overcloud is performed by the ironic service running in the +bifrost container on the seed. To provision the overcloud nodes:: (kayobe-venv) $ kayobe overcloud provision After this command has completed the overcloud nodes should have been -provisioned with an OS image. To configure the overcloud hosts' OS:: +provisioned with an OS image. The command will wait for the nodes to become +``active`` in ironic and accessible via SSH. + +Host Configuration +------------------ + +To configure the overcloud hosts' OS:: (kayobe-venv) $ kayobe overcloud host configure @@ -160,34 +308,69 @@ provisioned with an OS image. To configure the overcloud hosts' OS:: (kayobe-venv) $ kayobe overcloud host configure --wipe-disks -It is possible to use prebuilt container images from an image registry such as -Dockerhub. In some cases it may be necessary to build images locally either to -apply local image customisation or to use a downstream version of kolla. To -build images locally:: +Building Container Images +------------------------- + +.. note:: + + It is possible to use prebuilt container images from an image registry such + as Dockerhub. In this case, this step can be skipped. + +In some cases it may be necessary to build images locally either to apply local +image customisation or to use a downstream version of kolla. To build images +locally:: (kayobe-venv) $ kayobe overcloud container image build +Deploying Containerised Services +-------------------------------- + To deploy the overcloud services in containers:: (kayobe-venv) $ kayobe overcloud service deploy Once this command has completed the overcloud nodes should have OpenStack -services running in Docker containers. Kolla-ansible writes out an environment -file that can be used to access the OpenStack services:: +services running in Docker containers. + +Interacting with the Control Plane +---------------------------------- + +Kolla-ansible writes out an environment file that can be used to access the +OpenStack services:: $ source ${KOLLA_CONFIG_PATH:-/etc/kolla}/admin-openrc.sh Other Useful Commands ===================== -To run an arbitrary Kayobe playbook:: +Running Kayobe Playbooks on Demand +---------------------------------- + +In some situations it may be necessary to run an individual Kayobe playbook. +Playbooks are stored in ``/ansible/*.yml``. To run an arbitrary +Kayobe playbook:: (kayobe-venv) $ kayobe playbook run [] +Running Kolla-ansible Commands +------------------------------ + To execute a kolla-ansible command:: (kayobe-venv) $ kayobe kolla ansible run -To dump Kayobe configuration for one or more hosts:: +Dumping Kayobe Configuration +---------------------------- + +The Ansible configuration space is quite large, and it can be hard to determine +the final values of Ansible variables. We can use Kayobe's +``configuration dump`` command to view individual variables or the variables +for one or more hosts. To dump Kayobe configuration for one or more hosts:: (kayobe-venv) $ kayobe configuration dump + +The output is a JSON-formatted object mapping hosts to their hostvars. + +We can use the ``--var-name`` argument to inspect a particular variable or the +``--host`` or ``--hosts`` arguments to view a variable or variables for a +specific host or set of hosts.