diff --git a/doc/advanced-configuration.rst b/doc/advanced-configuration.rst index fda524ce85..12465f1f23 100644 --- a/doc/advanced-configuration.rst +++ b/doc/advanced-configuration.rst @@ -1,6 +1,131 @@ Advanced Configuration ====================== +Endpoint Network Configuration +------------------------------ +When an OpenStack cloud is deployed, each services' REST API is presented +as a series of endpoints. These endpoints are the admin URL, the internal +URL, and the external URL. + +Kolla offers two options for assigning these endpoints to network addresses. +These are combined and separate. For the combined option, all three +endpoints share the same IP address. For the separate option, the external +URL is assigned to an IP address that is different that the IP address +shared by the internal and admin URLs. + +The configuration parameters related to these options are: +- kolla_internal_vip_address +- network_interface +- kolla_external_vip_address +- kolla_external_vip_interface + +For the combined option, set the two variables below, while allowing the +other two to accept their default values. In this configuration all REST +API requests, internal and external, will flow over the same network. +:: + + kolla_internal_vip_address: "10.10.10.254" + network_interface: "eth0" + +For the separate option, set these four variables. In this configuration +the internal and external REST API requests can flow over separate +networks. +:: + + kolla_internal_vip_address: "10.10.10.254" + network_interface: "eth0" + kolla_external_vip_address: "10.10.20.254" + kolla_external_vip_interface: "eth1" + + +Fully Qualified Domain Name Configuration +----------------------------------------- +When addressing a server on the internet, it is more common to use +a name, like www.example.net, instead of an address like 10.10.10.254. +If you prefer to use names to address the endpoints in your kolla +deployment use the variables: +- kolla_internal_fqdn +- kolla_external_fqdn +:: + kolla_internal_fqdn: inside.mykolla.example.net + kolla_external_fqdn: mykolla.example.net + +Provisions must be taken outside of kolla for these names to map to the +configured IP addresses. Using a DNS server or the /etc/hosts file are +two ways to create this mapping. + +TLS Configuration +----------------- +An additional endpoint configuration option is to enable or disable +TLS protection for the external VIP. TLS allows a client to authenticate +the OpenStack service endpoint and allows for encryption of the requests +and responses. + +.. NOTE:: The kolla_internal_vip_address and kolla_external_vip_address must + be different to enable TLS on the external network. + +The configuration variables that control TLS networking are: +- kolla_enable_tls_external +- kolla_external_fqdn_cert + +The default for TLS is disabled; to enable TLS networking: +:: + + kolla_enable_tls_external: "yes" + kolla_external_fqdn_cert: "{{ node_config_directory }}/certificates/mycert.pem" + + +.. NOTE:: TLS authentication is based on certificates that have been + signed by trusted Certificate Authorities. Examples of commercial + CAs are Comodo, Symantec, GoDaddy, and GlobalSign. Letsencrypt.org + is a CA that will provided trusted certificates at no charge. Many + company's IT departments will provide certificates within that + company's domain. If using a trusted CA is not possible for your + situation, you can use OpenSSL to create your own or see the section + below about kolla generated self-signed certificates. + +Two certificate files are required to use TLS securely with authentication. +These two files will be provided by your Certificate Authority. These +two files are the server certificate with private key and the CA certificate +with any intermediate certificates. The server certificate needs to be +installed with the kolla deployment and is configured with the +kolla_external_fqdn_cert parameter. If the server certificate provided +is not already trusted by the client, then the CA certificate file will +need to be distributed to the client. + +When using TLS to connect to a public endpoint, an OpenStack client will +have settings similar to this: +:: + + export OS_PROJECT_DOMAIN_ID=default + export OS_USER_DOMAIN_ID=default + export OS_PROJECT_NAME=demo + export OS_USERNAME=demo + export OS_PASSWORD=demo-password + export OS_AUTH_URL=https://mykolla.example.net:5000 + # os_cacert is optional for trusted certificates + export OS_CACERT=/etc/pki/mykolla-cacert.crt + export OS_IDENTITY_API_VERSION=3 + +Self-Signed Certificates +------------------------ +.. NOTE:: Self-signed certificates should never be used in production. + +It is not always practical to get a certificate signed by a well-known +trust CA, for example a development or internal test kolla deployment. In +these cases it can be useful to have a self-signed certificate to use. + +For convenience, the kolla-ansible command will generate the necessary +certificate files based on the information in the globals.yml configuration +file. +:: + + kolla-ansible certificates + +The files haproxy.pem and haproxy-ca.pem will be generated and stored +in the /etc/kolla/certificates/ directory. + + Deployment Configuration ------------------------ TODO(all) fill this section out diff --git a/tools/openrc-example b/tools/openrc-example index fec34259a9..72e87fdf4a 100644 --- a/tools/openrc-example +++ b/tools/openrc-example @@ -44,6 +44,6 @@ export OS_USER_DOMAIN_ID=default export OS_PROJECT_NAME=admin export OS_USERNAME=admin export OS_PASSWORD= -export OS_AUTH_URL=http://: +export OS_AUTH_URL=https://: export OS_CACERT= export OS_IDENTITY_API_VERSION=3