.. _manila-guide: =============== Manila in Kolla =============== Overview ~~~~~~~~ Currently, Kolla can deploy following manila services: * manila-api * manila-data * manila-scheduler * manila-share The OpenStack Shared File Systems service (Manila) provides file storage to a virtual machine. The Shared File Systems service provides an infrastructure for managing and provisioning of file shares. The service also enables management of share types as well as share snapshots if a driver supports them. Important ~~~~~~~~~ For simplicity, this guide describes configuring the Shared File Systems service to use the ``generic`` back end with the driver handles share server mode (DHSS) enabled that uses Compute (nova), Networking (neutron) and Block storage (cinder) services. Networking service configuration requires the capability of networks being attached to a public router in order to create shared networks. Before you proceed, ensure that Compute, Networking and Block storage services are properly working. Preparation and Deployment ~~~~~~~~~~~~~~~~~~~~~~~~~~ Cinder and Ceph are required, enable it in ``/etc/kolla/globals.yml``: .. code-block:: console enable_cinder: "yes" enable_ceph: "yes" .. end Enable Manila and generic back end in ``/etc/kolla/globals.yml``: .. code-block:: console enable_manila: "yes" enable_manila_backend_generic: "yes" .. end By default Manila uses instance flavor id 100 for its file systems. For Manila to work, either create a new nova flavor with id 100 (use *nova flavor-create*) or change *service_instance_flavor_id* to use one of the default nova flavor ids. Ex: *service_instance_flavor_id = 2* to use nova default flavor ``m1.small``. Create or modify the file ``/etc/kolla/config/manila-share.conf`` and add the contents: .. code-block:: console [generic] service_instance_flavor_id = 2 .. end Verify Operation ~~~~~~~~~~~~~~~~ Verify operation of the Shared File Systems service. List service components to verify successful launch of each process: .. code-block:: console # manila service-list +------------------+----------------+------+---------+-------+----------------------------+-----------------+ | Binary | Host | Zone | Status | State | Updated_at | Disabled Reason | +------------------+----------------+------+---------+-------+----------------------------+-----------------+ | manila-scheduler | controller | nova | enabled | up | 2014-10-18T01:30:54.000000 | None | | manila-share | share1@generic | nova | enabled | up | 2014-10-18T01:30:57.000000 | None | +------------------+----------------+------+---------+-------+----------------------------+-----------------+ .. end Launch an Instance ~~~~~~~~~~~~~~~~~~ Before being able to create a share, the manila with the generic driver and the DHSS mode enabled requires the definition of at least an image, a network and a share-network for being used to create a share server. For that back end configuration, the share server is an instance where NFS/CIFS shares are served. Determine the configuration of the share server ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Create a default share type before running manila-share service: .. code-block:: console # manila type-create default_share_type True +--------------------------------------+--------------------+------------+------------+-------------------------------------+-------------------------+ | ID | Name | Visibility | is_default | required_extra_specs | optional_extra_specs | +--------------------------------------+--------------------+------------+------------+-------------------------------------+-------------------------+ | 8a35da28-0f74-490d-afff-23664ecd4f01 | default_share_type | public | - | driver_handles_share_servers : True | snapshot_support : True | +--------------------------------------+--------------------+------------+------------+-------------------------------------+-------------------------+ .. end Create a manila share server image to the Image service: .. code-block:: console # wget http://tarballs.openstack.org/manila-image-elements/images/manila-service-image-master.qcow2 # glance image-create --name "manila-service-image" \ --file manila-service-image-master.qcow2 \ --disk-format qcow2 --container-format bare \ --visibility public --progress [=============================>] 100% +------------------+--------------------------------------+ | Property | Value | +------------------+--------------------------------------+ | checksum | 48a08e746cf0986e2bc32040a9183445 | | container_format | bare | | created_at | 2016-01-26T19:52:24Z | | disk_format | qcow2 | | id | 1fc7f29e-8fe6-44ef-9c3c-15217e83997c | | min_disk | 0 | | min_ram | 0 | | name | manila-service-image | | owner | e2c965830ecc4162a002bf16ddc91ab7 | | protected | False | | size | 306577408 | | status | active | | tags | [] | | updated_at | 2016-01-26T19:52:28Z | | virtual_size | None | | visibility | public | +------------------+--------------------------------------+ .. end List available networks to get id and subnets of the private network: .. code-block:: console +--------------------------------------+---------+----------------------------------------------------+ | id | name | subnets | +--------------------------------------+---------+----------------------------------------------------+ | 0e62efcd-8cee-46c7-b163-d8df05c3c5ad | public | 5cc70da8-4ee7-4565-be53-b9c011fca011 10.3.31.0/24 | | 7c6f9b37-76b4-463e-98d8-27e5686ed083 | private | 3482f524-8bff-4871-80d4-5774c2730728 172.16.1.0/24 | +--------------------------------------+---------+----------------------------------------------------+ .. end Create a shared network .. code-block:: console # manila share-network-create --name demo-share-network1 \ --neutron-net-id PRIVATE_NETWORK_ID \ --neutron-subnet-id PRIVATE_NETWORK_SUBNET_ID +-------------------+--------------------------------------+ | Property | Value | +-------------------+--------------------------------------+ | name | demo-share-network1 | | segmentation_id | None | | created_at | 2016-01-26T20:03:41.877838 | | neutron_subnet_id | 3482f524-8bff-4871-80d4-5774c2730728 | | updated_at | None | | network_type | None | | neutron_net_id | 7c6f9b37-76b4-463e-98d8-27e5686ed083 | | ip_version | None | | nova_net_id | None | | cidr | None | | project_id | e2c965830ecc4162a002bf16ddc91ab7 | | id | 58b2f0e6-5509-4830-af9c-97f525a31b14 | | description | None | +-------------------+--------------------------------------+ .. end Create a flavor (**Required** if you not defined *manila_instance_flavor_id* in ``/etc/kolla/config/manila-share.conf`` file) .. code-block:: console # nova flavor-create manila-service-flavor 100 128 0 1 .. end Create a share ~~~~~~~~~~~~~~ Create a NFS share using the share network: .. code-block:: console # manila create NFS 1 --name demo-share1 --share-network demo-share-network1 +-----------------------------+--------------------------------------+ | Property | Value | +-----------------------------+--------------------------------------+ | status | None | | share_type_name | None | | description | None | | availability_zone | None | | share_network_id | None | | export_locations | [] | | host | None | | snapshot_id | None | | is_public | False | | task_state | None | | snapshot_support | True | | id | 016ca18f-bdd5-48e1-88c0-782e4c1aa28c | | size | 1 | | name | demo-share1 | | share_type | None | | created_at | 2016-01-26T20:08:50.502877 | | export_location | None | | share_proto | NFS | | consistency_group_id | None | | source_cgsnapshot_member_id | None | | project_id | 48e8c35b2ac6495d86d4be61658975e7 | | metadata | {} | +-----------------------------+--------------------------------------+ .. end After some time, the share status should change from ``creating`` to ``available``: .. code-block:: console # manila list +--------------------------------------+-------------+------+-------------+-----------+-----------+--------------------------------------+-----------------------------+-------------------+ | ID | Name | Size | Share Proto | Status | Is Public | Share Type Name | Host | Availability Zone | +--------------------------------------+-------------+------+-------------+-----------+-----------+--------------------------------------+-----------------------------+-------------------+ | e1e06b14-ba17-48d4-9e0b-ca4d59823166 | demo-share1 | 1 | NFS | available | False | default_share_type | share1@generic#GENERIC | nova | +--------------------------------------+-------------+------+-------------+-----------+-----------+--------------------------------------+-----------------------------+-------------------+ .. end Configure user access to the new share before attempting to mount it via the network: .. code-block:: console # manila access-allow demo-share1 ip INSTANCE_PRIVATE_NETWORK_IP .. end Mount the share from an instance ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Get export location from share .. code-block:: console # manila show demo-share1 +-----------------------------+----------------------------------------------------------------------+ | Property | Value | +-----------------------------+----------------------------------------------------------------------+ | status | available | | share_type_name | default_share_type | | description | None | | availability_zone | nova | | share_network_id | fa07a8c3-598d-47b5-8ae2-120248ec837f | | export_locations | | | | path = 10.254.0.3:/shares/share-422dc546-8f37-472b-ac3c-d23fe410d1b6 | | | preferred = False | | | is_admin_only = False | | | id = 5894734d-8d9a-49e4-b53e-7154c9ce0882 | | | share_instance_id = 422dc546-8f37-472b-ac3c-d23fe410d1b6 | | share_server_id | 4782feef-61c8-4ffb-8d95-69fbcc380a52 | | host | share1@generic#GENERIC | | access_rules_status | active | | snapshot_id | None | | is_public | False | | task_state | None | | snapshot_support | True | | id | e1e06b14-ba17-48d4-9e0b-ca4d59823166 | | size | 1 | | name | demo-share1 | | share_type | 6e1e803f-1c37-4660-a65a-c1f2b54b6e17 | | has_replicas | False | | replication_type | None | | created_at | 2016-03-15T18:59:12.000000 | | share_proto | NFS | | consistency_group_id | None | | source_cgsnapshot_member_id | None | | project_id | 9dc02df0f2494286ba0252b3c81c01d0 | | metadata | {} | +-----------------------------+----------------------------------------------------------------------+ .. end Create a folder where the mount will be placed: .. code-block:: console # mkdir ~/test_folder .. end Mount the NFS share in the instance using the export location of the share: .. code-block:: console # mount -v 10.254.0.3:/shares/share-422dc546-8f37-472b-ac3c-d23fe410d1b6 ~/test_folder .. end Share Migration ~~~~~~~~~~~~~~~ As administrator, you can migrate a share with its data from one location to another in a manner that is transparent to users and workloads. You can use manila client commands to complete a share migration. For share migration, is needed modify ``manila.conf`` and set a ip in the same provider network for ``data_node_access_ip``. Modify the file ``/etc/kolla/config/manila.conf`` and add the contents: .. path /etc/kolla/config/manila.conf .. code-block:: ini [DEFAULT] data_node_access_ip = 10.10.10.199 .. end .. note:: Share migration requires have more than one back end configured. For details, see :ref:`hnas_configure_multiple_back_ends`. Use the manila migration command, as shown in the following example: .. code-block:: console # manila migration-start --preserve-metadata True|False \ --writable True|False --force_host_assisted_migration True|False \ --new_share_type share_type --new_share_network share_network \ shareID destinationHost .. end - ``--force-host-copy``: Forces the generic host-based migration mechanism and bypasses any driver optimizations. - ``destinationHost``: Is in this format ``host#pool`` which includes destination host and pool. - ``--writable`` and ``--preserve-metadata``: Are only for driver assisted. - ``--new_share_network``: Only if driver supports shared network. - ``--new_share_type``: Choose share type compatible with destinationHost. Checking share migration progress --------------------------------- Use the :command:`manila migration-get-progress shareID` command to check progress. .. code-block:: console # manila migration-get-progress demo-share1 +----------------+-----------------------+ | Property | Value | +----------------+-----------------------+ | task_state | data_copying_starting | | total_progress | 0 | +----------------+-----------------------+ # manila migration-get-progress demo-share1 +----------------+-------------------------+ | Property | Value | +----------------+-------------------------+ | task_state | data_copying_completing | | total_progress | 100 | +----------------+-------------------------+ .. end Use the :command:`manila migration-complete shareID` command to complete share migration process. For more information about how to manage shares, see the `Manage shares `__.