==================================== Development Environment with Vagrant ==================================== This guide describes how to use `Vagrant `__ to assist in developing for Kolla. Vagrant is a tool for building and managing virtual machine environments in a single workflow. Vagrant takes care of setting up CentOS-based VMs for Kolla development, each with proper hardware like memory amount and number of network interfaces. Getting Started =============== The Vagrant script implements **all-in-one** or **multi-node** deployments. **all-in-one** is the default. In the case of **multi-node** deployment, the Vagrant setup builds a cluster with the following nodes by default: * 3 control nodes * 1 compute node * 1 storage node (Note: ceph requires at least 3 storage nodes) * 1 network node * 1 operator node The cluster node count can be changed by editing the Vagrantfile. Kolla runs from the operator node to deploy OpenStack. All nodes are connected with each other on the secondary NIC. The primary NIC is behind a NAT interface for connecting with the Internet. The third NIC is connected without IP configuration to a public bridge interface. This may be used for Neutron/Nova to connect to instances. Start by downloading and installing the Vagrant package for the distro of choice. Various downloads can be found at the `Vagrant downloads `__. Install required dependencies as follows: For CentOS 7 or later: .. code-block:: console sudo yum install ruby-devel libvirt-devel zlib-devel libpng-devel gcc \ qemu-kvm qemu-img libvirt libvirt-python libvirt-client virt-install \ bridge-utils git For Ubuntu 16.04 or later: .. code-block:: console sudo apt-get install vagrant ruby-dev ruby-libvirt python-libvirt \ qemu-utils qemu-kvm libvirt-dev nfs-kernel-server zlib1g-dev libpng12-dev \ gcc git .. note:: Many distros ship outdated versions of Vagrant by default. When in doubt, always install the latest from the downloads page above. Next install the hostmanager plugin so all hosts are recorded in ``/etc/hosts`` (inside each vm): .. code-block:: console vagrant plugin install vagrant-hostmanager If you are going to use VirtualBox, then install vagrant-vbguest: .. code-block:: console vagrant plugin install vagrant-vbguest Vagrant supports a wide range of virtualization technologies. If VirtualBox is used, the vbguest plugin will be required to install the VirtualBox Guest Additions in the virtual machine: .. code-block:: console vagrant plugin install vagrant-vbguest This documentation focuses on libvirt specifics. To install vagrant-libvirt plugin: .. code-block:: console vagrant plugin install --plugin-version ">= 0.0.31" vagrant-libvirt Some Linux distributions offer vagrant-libvirt packages, but the version they provide tends to be too old to run Kolla. A version of >= 0.0.31 is required. To use libvirt from Vagrant with a low privileges user without being asked for a password, add the user to the libvirt group: .. code-block:: console sudo gpasswd -a ${USER} libvirt newgrp libvirt .. note:: In Ubuntu 16.04 and later, libvirtd group is used. Setup NFS to permit file sharing between host and VMs. Contrary to the rsync method, NFS allows both way synchronization and offers much better performance than VirtualBox shared folders. For CentOS: #. Add the virtual interfaces to the internal zone: .. code-block:: console sudo firewall-cmd --zone=internal --add-interface=virbr0 sudo firewall-cmd --zone=internal --add-interface=virbr1 #. Enable nfs, rpc-bind and mountd services for firewalld: .. code-block:: console sudo firewall-cmd --permanent --zone=internal --add-service=nfs sudo firewall-cmd --permanent --zone=internal --add-service=rpc-bind sudo firewall-cmd --permanent --zone=internal --add-service=mountd sudo firewall-cmd --permanent --zone=internal --add-port=2049/udp sudo firewall-cmd --permanent --add-port=2049/tcp sudo firewall-cmd --permanent --add-port=111/udp sudo firewall-cmd --permanent --add-port=111/tcp sudo firewall-cmd --reload .. note:: You may not have to do this because Ubuntu uses Uncomplicated Firewall (ufw) and ufw is disabled by default. #. Start required services for NFS: .. code-block:: console sudo systemctl restart firewalld sudo systemctl start nfs-server sudo systemctl start rpcbind.service Ensure your system has libvirt and associated software installed and setup correctly. For CentOS: .. code-block:: console sudo systemctl start libvirtd sudo systemctl enable libvirtd Find a location in the system's home directory and checkout Kolla repos: .. code-block:: console git clone https://opendev.org/openstack/kolla-cli git clone https://opendev.org/openstack/kolla-ansible git clone https://opendev.org/openstack/kolla All repos must share the same parent directory so the bootstrap code can locate them. Developers can now tweak the Vagrantfile or bring up the default **all-in-one** CentOS 7-based environment: .. code-block:: console cd kolla-ansible/contrib/dev/vagrant && vagrant up The command ``vagrant status`` provides a quick overview of the VMs composing the environment. Vagrant Up ========== Once Vagrant has completed deploying all nodes, the next step is to launch Kolla. First, connect with the **operator** node: .. code-block:: console vagrant ssh operator To speed things up, there is a local registry running on the operator. All nodes are configured so they can use this insecure repo to pull from, and use it as a mirror. Ansible may use this registry to pull images from. All nodes have a local folder shared between the group and the hypervisor, and a folder shared between **all** nodes and the hypervisor. This mapping is lost after reboots, so make sure to use the command ``vagrant reload `` when reboots are required. Having this shared folder provides a method to supply a different Docker binary to the cluster. The shared folder is also used to store the docker-registry files, so they are save from destructive operations like ``vagrant destroy``. Building images --------------- Once logged on the **operator** VM call the ``kolla-build`` utility: .. code-block:: console kolla-build ``kolla-build`` accept arguments as documented in :kolla-doc:`Building Container Images `. It builds Docker images and pushes them to the local registry if the **push** option is enabled (in Vagrant this is the default behaviour). Generating passwords -------------------- Before proceeding with the deployment you must generate the service passwords: .. code-block:: console kolla-genpwd Deploying OpenStack with Kolla ------------------------------ To deploy **all-in-one**: .. code-block:: console sudo kolla-ansible deploy To deploy **multinode**: Ensure that the nodes deployed by Vagrant match those specified in the inventory file: ``/usr/share/kolla-ansible/ansible/inventory/multinode``. For Centos 7: .. code-block:: console sudo kolla-ansible deploy -i /usr/share/kolla-ansible/ansible/inventory/multinode For Ubuntu 16.04 or later: .. code-block:: console sudo kolla-ansible deploy -i /usr/local/share/kolla-ansible/ansible/inventory/multinode Validate OpenStack is operational: .. code-block:: console kolla-ansible post-deploy . /etc/kolla/admin-openrc.sh openstack user list Or navigate to ``http://172.28.128.254/`` with a web browser. Further Reading =============== All Vagrant documentation can be found at `Vagrant documentation `_.