diff --git a/etc/network/interfaces.d/aio_interfaces.cfg b/etc/network/interfaces.d/aio_interfaces.cfg new file mode 100644 index 0000000000..1895e76568 --- /dev/null +++ b/etc/network/interfaces.d/aio_interfaces.cfg @@ -0,0 +1,45 @@ +## Required network bridges; br-vlan, br-vxlan, br-mgmt. +auto br-mgmt +iface br-mgmt inet static + bridge_stp off + bridge_waitport 0 + bridge_fd 0 + # Notice the bridge port is the vlan tagged interface + bridge_ports none + address 172.29.236.100 + netmask 255.255.252.0 + +auto br-vxlan +iface br-vxlan inet static + bridge_stp off + bridge_waitport 0 + bridge_fd 0 + bridge_ports none + address 172.29.240.100 + netmask 255.255.252.0 + # To ensure ssh checksum is correct + up /sbin/iptables -A POSTROUTING -t mangle -p tcp --dport 22 -j CHECKSUM --checksum-fill + down /sbin/iptables -D POSTROUTING -t mangle -p tcp --dport 22 -j CHECKSUM --checksum-fill + # To ensure dhcp checksum is correct + up /sbin/iptables -A POSTROUTING -t mangle -p udp --dport 68 -j CHECKSUM --checksum-fill + down /sbin/iptables -D POSTROUTING -t mangle -p udp --dport 68 -j CHECKSUM --checksum-fill + # To provide internet connectivity to instances + up /sbin/iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE + down /sbin/iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE + +auto br-vlan +iface br-vlan inet manual + bridge_stp off + bridge_waitport 0 + bridge_fd 0 + # Notice this bridge port is an Untagged host interface + bridge_ports none + +auto br-storage +iface br-storage inet static + bridge_stp off + bridge_waitport 0 + bridge_fd 0 + bridge_ports none + address 172.29.244.100 + netmask 255.255.252.0 diff --git a/etc/rpc_deploy/conf.d/swift.yml b/etc/rpc_deploy/conf.d/swift.yml index 6148f7d436..123cfaeed5 100644 --- a/etc/rpc_deploy/conf.d/swift.yml +++ b/etc/rpc_deploy/conf.d/swift.yml @@ -1,294 +1,22 @@ --- -# Copyright 2015, Rackspace US, Inc. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -# Overview -# ======== -# -# This file contains the configuration for the Object Storage (swift) -# service. Only enable these options for environments that contain the -# Object Storage service. For more information on Object Storage options, -# see the documentation at -# -# http://docs.openstack.org/developer/swift/index.html -# -# The hierarchical structure of this file supports overrides for most -# options. However, for typical deployments, defining options closest -# to the top level provides a functional configuration. -# -# Configuration reference -# ======================= -# -# Level: swift (required) -# Contains global options. -# -# Option: storage_network (optional, string) -# Network to use for object storage operations. Defaults to the management -# network if omitted. -# If using a storage network, specify the network bridge containing it, -# typically 'br-storage'. -# -# Option: repl_network (optional, string) -# Network to use for object replication operations. Defaults to the -# 'storage_network' value if omitted. -# If using a replication network, specify the network bridge containing it, -# typically 'br-repl'. -# -# Option: part_power (required, integer) -# Partition power. Immutable without rebuilding the rings. -# Applies to all rings unless overridden at the 'account' or 'container' -# levels or within a policy under the 'storage_policies' level. -# -# Option: repl_number (optional, integer) -# Number of replicas for each partition. Defaults to 3. -# Applies to all rings unless overridden at the 'account' or 'container' -# levels or within a policy under the 'storage_policies' level. -# -# Option: min_part_hours (optional, integer) -# Minimum time in hours between multiple moves of the same partition. -# Defaults to 1. -# Applies to all rings unless overridden at the 'account' or 'container' -# levels or within a policy under the 'storage_policies' level. -# -# Option: region (optional, integer) -# Region of a disk. Defaults to 1. -# Applies to all disks in all hosts unless overridden deeper in the -# structure. -# -# Option: zone (optional, integer) -# Zone of a disk. Defaults to 0. -# Applies to all disks in all hosts unless overridden deeper in the -# structure. -# -# Option: weight (optional, integer) -# Weight of a disk. Defaults to 100. -# Applies to all disks in all hosts unless overridden deeper in the -# structure. -# -# Option: mount_point (required, string) -# Top-level directory for mount points of disks. Defaults to /mnt. -# Applies to all hosts unless overridden deeper in the structure. -# -# Level: drives (required) -# Contains the mount points of disks. -# Applies to all hosts unless overridden deeper in the structure. -# -# Option: name (required, string) -# Mount point of a disk. Use one entry for each disk. -# Applies to all hosts unless overridden deeper in the structure. -# -# The following example shows disks mounted at /mnt/sda and /mnt/sdb -# on all storage hosts: -# mount_point: /mnt -# drives: -# - name: sda -# - name: sdb -# -# Level: account (optional) -# Contains 'min_part_hours' and 'repl_number' options specific to the -# account ring. -# -# Level: container (optional) -# Contains 'min_part_hours' and 'repl_number' options specific to the -# container ring. -# -# Level: storage_policies (required) -# Contains storage policies. Minimum one policy. One policy must include -# the 'index: 0' and 'default: True' options. -# -# Level: policy (required) -# Contains a storage policy. -# -# Option: name (required, string) -# Policy name. -# -# Option: index (required, integer) -# Policy index. One policy must include this option with a '0' -# value. -# -# Option: default (optional, boolean) -# Defines the default policy. One policy must include this option -# with a 'True' value. -# -# Option: deprecated (optional, boolean) -# Defines a deprecated policy. -# -# Note: The following levels and options override any values higher -# in the structure and generally apply to advanced deployments. -# -# Option: repl_number (optional, integer) -# Number of replicas of each partition in this policy. -# -# Option: min_part_hours (optional, integer) -# Minimum time between multiple moves of the same partition in this -# policy. -# -# Level: swift_proxy-hosts (required) -# Contains definitions for proxy hosts. -# -# Level: (optional, string) -# Name of a proxy host. Typical deployments require at least three -# proxy hosts. -# -# Option: ip (required, string) -# IP address of the host. -# -# Level: swift_hosts (required) -# Contains definitions for storage hosts. -# -# Level: (required, string) -# Name of a storage host. Typical deployments require at least three -# storage hosts. -# -# Option: ip (required, string) -# IP address of the host. -# -# Note: The following levels and options override any values higher -# in the structure and generally apply to advanced deployments. -# -# Level: container_vars (optional) -# Contains options specific to this host. -# -# Level: swift_vars (optional) -# Contains swift options specific to this host. -# -# Option: region (optional, integer) -# Region of all disks in this host. -# -# Option: zone (optional, integer) -# Zone of all disks in this host. -# -# Option: weight (optional, integer) -# Weight of all disks in this host. -# -# Level: groups (optional) -# Contains groups specific to this host. -# The following example shows a storage host with the account ring, -# container ring, and 'silver' storage policy: -# groups: -# - account -# - container -# - silver -# -# Level: drives (optional) -# Contains the mount points of disks specific to this host. -# -# Level or option: name (optional, string) -# Mount point of a disk specific to this host. Use one entry for -# each disk. Functions as a level for disks that contain additional -# options. -# -# Option: region (optional, integer) -# Region of a disk in this host. -# -# Option: zone (optional, integer) -# Zone of a disk in this host. -# -# Option: weight (optional, integer) -# Weight of a disk in this host. -# -# Level: groups (optional) -# Contains groups for a disk in this host. -# The following example shows a disk with the account ring, -# container ring, and 'silver' storage policy: -# groups: -# - account -# - container -# - silver - -# Default (example) configuration -# =============================== - -# Global options - -# global_overrides: -# swift: -# storage_network: 'br-storage' -# replication_network: 'br-repl' -# part_power: 8 -# repl_number: 3 -# min_part_hours: 1 -# region: 1 -# zone: 0 -# weight: 100 -# mount_point: /mnt -# drives: -# - name: sdc -# - name: sdd -# - name: sde -# - name: sdf -# account: -# container: -# storage_policies: -# - policy: -# name: gold -# index: 0 -# default: True -# - policy: -# name: silver -# index: 1 -# repl_number: 3 -# deprecated: True - -# Proxy hosts - -# swift-proxy_hosts: -# infra-node1: -# ip: 192.0.2.1 -# infra-node2: -# ip: 192.0.2.2 -# infra-node3: -# ip: 192.0.2.3 - -# Storage hosts -# -# The first three hosts contain options for typical deployments. Hosts -# four and five show options for more advanced deployments. - -# swift_hosts: -# swift-node1: -# ip: 192.0.2.4 -# swift-node2: -# ip: 192.0.2.5 -# swift-node3: -# ip: 192.0.2.6 -# swift-node4: -# ip: 192.0.2.7 -# container_vars: -# swift_vars: -# zone: 3 -# swift-node5: -# ip: 192.0.2.8 -# container_vars: -# swift_vars: -# storage_ip: 198.51.100.8 -# repl_ip: 203.0.113.8 -# region: 3 -# zone: 4 -# weight: 200 -# groups: -# - account -# - container -# - silver -# drives: -# - name: sdb -# storage_ip: 198.51.100.9 -# repl_ip: 203.0.113.9 -# weight: 75 -# groups: -# - gold -# - name: sdc -# - name: sdd -# - name: sde -# - name: sdf +global_overrides: + swift: + part_power: 8 + storage_network: 'br-storage' + replication_network: 'br-storage' + drives: + - name: swift1.img + - name: swift2.img + - name: swift3.img + mount_point: /srv + storage_policies: + - policy: + name: default + index: 0 + default: True +swift-proxy_hosts: + aio1: + ip: 172.29.236.100 +swift_hosts: + aio1: + ip: 172.29.236.100 diff --git a/etc/rpc_deploy/conf.d/swift.yml.example b/etc/rpc_deploy/conf.d/swift.yml.example new file mode 100644 index 0000000000..6148f7d436 --- /dev/null +++ b/etc/rpc_deploy/conf.d/swift.yml.example @@ -0,0 +1,294 @@ +--- +# Copyright 2015, Rackspace US, Inc. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +# Overview +# ======== +# +# This file contains the configuration for the Object Storage (swift) +# service. Only enable these options for environments that contain the +# Object Storage service. For more information on Object Storage options, +# see the documentation at +# +# http://docs.openstack.org/developer/swift/index.html +# +# The hierarchical structure of this file supports overrides for most +# options. However, for typical deployments, defining options closest +# to the top level provides a functional configuration. +# +# Configuration reference +# ======================= +# +# Level: swift (required) +# Contains global options. +# +# Option: storage_network (optional, string) +# Network to use for object storage operations. Defaults to the management +# network if omitted. +# If using a storage network, specify the network bridge containing it, +# typically 'br-storage'. +# +# Option: repl_network (optional, string) +# Network to use for object replication operations. Defaults to the +# 'storage_network' value if omitted. +# If using a replication network, specify the network bridge containing it, +# typically 'br-repl'. +# +# Option: part_power (required, integer) +# Partition power. Immutable without rebuilding the rings. +# Applies to all rings unless overridden at the 'account' or 'container' +# levels or within a policy under the 'storage_policies' level. +# +# Option: repl_number (optional, integer) +# Number of replicas for each partition. Defaults to 3. +# Applies to all rings unless overridden at the 'account' or 'container' +# levels or within a policy under the 'storage_policies' level. +# +# Option: min_part_hours (optional, integer) +# Minimum time in hours between multiple moves of the same partition. +# Defaults to 1. +# Applies to all rings unless overridden at the 'account' or 'container' +# levels or within a policy under the 'storage_policies' level. +# +# Option: region (optional, integer) +# Region of a disk. Defaults to 1. +# Applies to all disks in all hosts unless overridden deeper in the +# structure. +# +# Option: zone (optional, integer) +# Zone of a disk. Defaults to 0. +# Applies to all disks in all hosts unless overridden deeper in the +# structure. +# +# Option: weight (optional, integer) +# Weight of a disk. Defaults to 100. +# Applies to all disks in all hosts unless overridden deeper in the +# structure. +# +# Option: mount_point (required, string) +# Top-level directory for mount points of disks. Defaults to /mnt. +# Applies to all hosts unless overridden deeper in the structure. +# +# Level: drives (required) +# Contains the mount points of disks. +# Applies to all hosts unless overridden deeper in the structure. +# +# Option: name (required, string) +# Mount point of a disk. Use one entry for each disk. +# Applies to all hosts unless overridden deeper in the structure. +# +# The following example shows disks mounted at /mnt/sda and /mnt/sdb +# on all storage hosts: +# mount_point: /mnt +# drives: +# - name: sda +# - name: sdb +# +# Level: account (optional) +# Contains 'min_part_hours' and 'repl_number' options specific to the +# account ring. +# +# Level: container (optional) +# Contains 'min_part_hours' and 'repl_number' options specific to the +# container ring. +# +# Level: storage_policies (required) +# Contains storage policies. Minimum one policy. One policy must include +# the 'index: 0' and 'default: True' options. +# +# Level: policy (required) +# Contains a storage policy. +# +# Option: name (required, string) +# Policy name. +# +# Option: index (required, integer) +# Policy index. One policy must include this option with a '0' +# value. +# +# Option: default (optional, boolean) +# Defines the default policy. One policy must include this option +# with a 'True' value. +# +# Option: deprecated (optional, boolean) +# Defines a deprecated policy. +# +# Note: The following levels and options override any values higher +# in the structure and generally apply to advanced deployments. +# +# Option: repl_number (optional, integer) +# Number of replicas of each partition in this policy. +# +# Option: min_part_hours (optional, integer) +# Minimum time between multiple moves of the same partition in this +# policy. +# +# Level: swift_proxy-hosts (required) +# Contains definitions for proxy hosts. +# +# Level: (optional, string) +# Name of a proxy host. Typical deployments require at least three +# proxy hosts. +# +# Option: ip (required, string) +# IP address of the host. +# +# Level: swift_hosts (required) +# Contains definitions for storage hosts. +# +# Level: (required, string) +# Name of a storage host. Typical deployments require at least three +# storage hosts. +# +# Option: ip (required, string) +# IP address of the host. +# +# Note: The following levels and options override any values higher +# in the structure and generally apply to advanced deployments. +# +# Level: container_vars (optional) +# Contains options specific to this host. +# +# Level: swift_vars (optional) +# Contains swift options specific to this host. +# +# Option: region (optional, integer) +# Region of all disks in this host. +# +# Option: zone (optional, integer) +# Zone of all disks in this host. +# +# Option: weight (optional, integer) +# Weight of all disks in this host. +# +# Level: groups (optional) +# Contains groups specific to this host. +# The following example shows a storage host with the account ring, +# container ring, and 'silver' storage policy: +# groups: +# - account +# - container +# - silver +# +# Level: drives (optional) +# Contains the mount points of disks specific to this host. +# +# Level or option: name (optional, string) +# Mount point of a disk specific to this host. Use one entry for +# each disk. Functions as a level for disks that contain additional +# options. +# +# Option: region (optional, integer) +# Region of a disk in this host. +# +# Option: zone (optional, integer) +# Zone of a disk in this host. +# +# Option: weight (optional, integer) +# Weight of a disk in this host. +# +# Level: groups (optional) +# Contains groups for a disk in this host. +# The following example shows a disk with the account ring, +# container ring, and 'silver' storage policy: +# groups: +# - account +# - container +# - silver + +# Default (example) configuration +# =============================== + +# Global options + +# global_overrides: +# swift: +# storage_network: 'br-storage' +# replication_network: 'br-repl' +# part_power: 8 +# repl_number: 3 +# min_part_hours: 1 +# region: 1 +# zone: 0 +# weight: 100 +# mount_point: /mnt +# drives: +# - name: sdc +# - name: sdd +# - name: sde +# - name: sdf +# account: +# container: +# storage_policies: +# - policy: +# name: gold +# index: 0 +# default: True +# - policy: +# name: silver +# index: 1 +# repl_number: 3 +# deprecated: True + +# Proxy hosts + +# swift-proxy_hosts: +# infra-node1: +# ip: 192.0.2.1 +# infra-node2: +# ip: 192.0.2.2 +# infra-node3: +# ip: 192.0.2.3 + +# Storage hosts +# +# The first three hosts contain options for typical deployments. Hosts +# four and five show options for more advanced deployments. + +# swift_hosts: +# swift-node1: +# ip: 192.0.2.4 +# swift-node2: +# ip: 192.0.2.5 +# swift-node3: +# ip: 192.0.2.6 +# swift-node4: +# ip: 192.0.2.7 +# container_vars: +# swift_vars: +# zone: 3 +# swift-node5: +# ip: 192.0.2.8 +# container_vars: +# swift_vars: +# storage_ip: 198.51.100.8 +# repl_ip: 203.0.113.8 +# region: 3 +# zone: 4 +# weight: 200 +# groups: +# - account +# - container +# - silver +# drives: +# - name: sdb +# storage_ip: 198.51.100.9 +# repl_ip: 203.0.113.9 +# weight: 75 +# groups: +# - gold +# - name: sdc +# - name: sdd +# - name: sde +# - name: sdf diff --git a/etc/rpc_deploy/rpc_user_config.yml b/etc/rpc_deploy/rpc_user_config.yml index 571fa9d436..c8198b5526 100644 --- a/etc/rpc_deploy/rpc_user_config.yml +++ b/etc/rpc_deploy/rpc_user_config.yml @@ -1,191 +1,91 @@ --- -# Copyright 2014, Rackspace US, Inc. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -# This is the md5 of the environment file -# this will ensure consistency when deploying. environment_version: 3511a43b8e4cc39af4beaaa852b5f917 - -# User defined container networks in CIDR notation. The inventory generator -# assigns IP addresses to network interfaces inside containers from these -# ranges. cidr_networks: - # Management (same range as br-mgmt on the target hosts) container: 172.29.236.0/22 - # Service (optional, same range as br-snet on the target hosts) - snet: 172.29.248.0/22 - # Tunnel endpoints for VXLAN tenant networks - # (same range as br-vxlan on the target hosts) tunnel: 172.29.240.0/22 - # Storage (same range as br-storage on the target hosts) storage: 172.29.244.0/22 -# User defined list of consumed IP addresses that may intersect -# with the provided CIDR. used_ips: - 172.29.236.1,172.29.236.50 - 172.29.244.1,172.29.244.50 -# As a user you can define anything that you may wish to "globally" -# override from within the rpc_deploy configuration file. Anything -# specified here will take precedence over anything else any where. global_overrides: - # Size of cinder volumes container. Default is 5GB. - # Space must be added for cinder to have enough space to convert images. - # For example, to be able to convert 100GB images, set this value to 105. - #cinder_volume_lv_size_gb: 105GB - # Internal Management vip address - internal_lb_vip_address: 172.29.236.1 - # External DMZ VIP address + internal_lb_vip_address: 172.29.236.100 external_lb_vip_address: 192.168.1.1 - # Name of load balancer - lb_name: lb_name_in_core - # Bridged interface to use with tunnel type networks tunnel_bridge: "br-vxlan" - # Bridged interface to build containers with management_bridge: "br-mgmt" - # Define your Add on container networks. - # group_binds: bind a provided network to a particular group - # container_bridge: instructs inventory where a bridge is plugged - # into on the host side of a veth pair - # container_interface: interface name within a container - # ip_from_q: name of a cidr to pull an IP address from - # type: Networks must have a type. types are: ["raw", "vxlan", "flat", "vlan"] - # range: Optional value used in "vxlan" and "vlan" type networks - # net_name: Optional value used in mapping network names used in neutron ml2 - # You must have a management network. provider_networks: - network: + container_bridge: "br-mgmt" + container_interface: "eth1" + type: "raw" + ip_from_q: "container" group_binds: - all_containers - hosts - type: "raw" - container_bridge: "br-mgmt" - container_interface: "eth1" - ip_from_q: "container" - network: - group_binds: - - glance_api - - cinder_api - - cinder_volume - - nova_compute - # If you are using the storage network for swift_proxy add it to the group_binds - # - swift_proxy - type: "raw" - container_bridge: "br-storage" - container_interface: "eth2" - ip_from_q: "storage" - - network: - group_binds: - - glance_api - - nova_compute - - neutron_linuxbridge_agent - type: "raw" - container_bridge: "br-snet" - container_interface: "eth3" - ip_from_q: "snet" - - network: - group_binds: - - neutron_linuxbridge_agent container_bridge: "br-vxlan" container_interface: "eth10" - ip_from_q: "tunnel" type: "vxlan" + ip_from_q: "tunnel" range: "1:1000" net_name: "vxlan" - - network: group_binds: - neutron_linuxbridge_agent + - network: container_bridge: "br-vlan" container_interface: "eth11" type: "flat" - net_name: "vlan" - - network: + net_name: "flat" group_binds: - neutron_linuxbridge_agent + - network: container_bridge: "br-vlan" container_interface: "eth11" type: "vlan" range: "1:1" net_name: "vlan" + group_binds: + - neutron_linuxbridge_agent + - network: + container_bridge: "br-storage" + container_interface: "eth2" + type: "raw" + ip_from_q: "storage" + group_binds: + - glance_api + - cinder_api + - cinder_volume + - nova_compute + # - swift_proxy -# User defined Infrastructure Hosts, this should be a required group infra_hosts: - infra1: + aio1: ip: 172.29.236.100 - ## You can override the maas_filesystem_monitors here - # container_vars: - # maas_filesystem_overrides: - # - filesystem: / - # threshold: 85.0 - # - filesystem: /boot - # threshold: 90.0 - infra2: - ip: 172.29.236.101 - infra3: - ip: 172.29.236.102 -# User defined Compute Hosts, this should be a required group compute_hosts: - compute1: - ip: 172.29.236.103 + aio1: + ip: 172.29.236.100 -# User defined Storage Hosts, this should be a required group storage_hosts: - cinder1: - ip: 172.29.236.104 - # "container_vars" can be set outside of all other options as - # host specific optional variables. + aio1: + ip: 172.29.236.100 container_vars: - # If you would like to define a cinder availablility zone this can - # be done with the namespaced variable. - cinder_storage_availability_zone: cinderAZ_1 - # When creating more than ONE availablity zone you should define a - # sane default for the system to use when schedulng volume creation. - cinder_default_availability_zone: cinderAZ_1 - # In this example we are defining what cinder volumes are - # on a given host. cinder_backends: - # if the "limit_container_types" argument is set, within - # the top level key of the provided option the inventory - # process will perform a string match on the container name with - # the value found within the "limit_container_types" argument. - # If any part of the string found within the container - # name the options are appended as host_vars inside of inventory. limit_container_types: cinder_volume lvm: volume_group: cinder-volumes volume_driver: cinder.volume.drivers.lvm.LVMISCSIDriver volume_backend_name: LVM_iSCSI - cinder2: - ip: 172.29.236.105 - container_vars: - cinder_storage_availability_zone: cinderAZ_2 - cinder_default_availability_zone: cinderAZ_1 - cinder_backends: - limit_container_types: cinder_volume - lvm_ssd: - volume_group: cinder-volumes - volume_driver: cinder.volume.drivers.lvm.LVMISCSIDriver - volume_backend_name: LVM_iSCSI_SSD -# User defined Logging Hosts, this should be a required group log_hosts: - logger1: - ip: 172.29.236.107 + aio1: + ip: 172.29.236.100 -# User defined Networking Hosts, this should be a required group network_hosts: - network1: - ip: 172.29.236.108 + aio1: + ip: 172.29.236.100 + +haproxy_hosts: + aio1: + ip: 172.29.236.100 diff --git a/rpc_deployment/roles/neutron_common/files/post-up-checksum-rules.sh b/rpc_deployment/roles/neutron_common/files/post-up-checksum-rules.sh new file mode 100644 index 0000000000..75154698ff --- /dev/null +++ b/rpc_deployment/roles/neutron_common/files/post-up-checksum-rules.sh @@ -0,0 +1,52 @@ +#!/usr/bin/env bash +# Copyright 2014, Rackspace US, Inc. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +# NOTICE: +# This script is purpose built to resolve an issue within neutron +# where packet checksums are being dropped. +# Launchpad issue: +# https://bugs.launchpad.net/bugs/1244589 +# +# Open review: +# https://review.openstack.org/#/c/148718/ +# +# TODO(cloudnull) remove this script once the bug is fixed. + + +# Iptables path, used for ipv4 firewall. +IPTABLES=$(which iptables) +if [ ! -z "${IPTABLES}" ];then + if [ ! "$(${IPTABLES} -t mangle -nL | awk '$4 == "0.0.0.0/0" && $5 == "0.0.0.0/0" && $9 == "fill"')" ];then + ${IPTABLES} -A POSTROUTING \ + -t mangle \ + -p udp \ + --dport 68 \ + -j CHECKSUM \ + --checksum-fill + fi +fi + +# Ip6tables path, used for ipv6 firewall. +IP6TABLES=$(which ip6tables) +if [ ! -z "${IP6TABLES}" ];then + if [ ! "$(${IP6TABLES} -t mangle -nL | awk '$3 == "::/0" && $4 == "::/0" && $8 == "fill"')" ];then + ${IP6TABLES} -A POSTROUTING \ + -t mangle \ + -p udp \ + --dport 68 \ + -j CHECKSUM \ + --checksum-fill + fi +fi diff --git a/rpc_deployment/roles/neutron_common/tasks/main.yml b/rpc_deployment/roles/neutron_common/tasks/main.yml index 31cd0bff16..23be80debd 100644 --- a/rpc_deployment/roles/neutron_common/tasks/main.yml +++ b/rpc_deployment/roles/neutron_common/tasks/main.yml @@ -84,3 +84,24 @@ notify: Restart os service tags: - neutron_config + +- name: Drop iptables checksum fix + copy: + src: "post-up-checksum-rules.sh" + dest: "/etc/network/if-up.d/post-up-checksum-rules.sh" + owner: "root" + group: "root" + mode: "0755" + when: > + inventory_hostname in groups['neutron_linuxbridge_agent'] + tags: + - neutron_config + - neutron_checksum_fix + +- name: Run iptables checksum fix + command: /etc/network/if-up.d/post-up-checksum-rules.sh + when: > + inventory_hostname in groups['neutron_linuxbridge_agent'] + tags: + - neutron_config + - neutron_checksum_fix diff --git a/scripts/bootstrap-aio.sh b/scripts/bootstrap-aio.sh new file mode 100755 index 0000000000..7943526381 --- /dev/null +++ b/scripts/bootstrap-aio.sh @@ -0,0 +1,148 @@ +#!/usr/bin/env bash +# Copyright 2014, Rackspace US, Inc. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + + +## Shell Opts ---------------------------------------------------------------- +set -e -u -v +x + +## Vars +DEPLOY_SWIFT=${DEPLOY_SWIFT:-"yes"} +FLUSH_IPTABLES=${FLUSH_IPTABLES:-"yes"} + +## Functions ----------------------------------------------------------------- + +info_block "Checking for required libraries." || source $(dirname ${0})/scripts-library.sh + +## Main ---------------------------------------------------------------------- + +# Enable logging of all commands executed +set -x + +# update the package cache and install required packages +apt-get update && apt-get install -y \ + python-dev \ + python2.7 \ + build-essential \ + curl \ + git-core \ + ipython \ + tmux \ + vim \ + vlan \ + bridge-utils \ + lvm2 \ + xfsprogs \ + linux-image-extra-$(uname -r) + +# output diagnostic information +get_instance_info && set -x + +if [ "${FLUSH_IPTABLES}" == "yes" ]; then + # Flush all the iptables rules set by openstack-infra + iptables -F + iptables -X + iptables -t nat -F + iptables -t nat -X + iptables -t mangle -F + iptables -t mangle -X + iptables -P INPUT ACCEPT + iptables -P FORWARD ACCEPT + iptables -P OUTPUT ACCEPT +fi + +# Ensure newline at end of file (missing on Rackspace public cloud Trusty image) +if ! cat -E /etc/ssh/sshd_config | tail -1 | grep -q "\$$"; then + echo >> /etc/ssh/sshd_config +fi + +# Ensure that sshd permits root login, or ansible won't be able to connect +if grep -q "^PermitRootLogin" /etc/ssh/sshd_config; then + sed -i 's/^PermitRootLogin.*/PermitRootLogin yes/' /etc/ssh/sshd_config +else + echo 'PermitRootLogin yes' >> /etc/ssh/sshd_config +fi + +# create /opt if it doesn't already exist +if [ ! -d "/opt" ];then + mkdir /opt +fi + +# create /etc/rc.local if it doesn't already exist +if [ ! -f "/etc/rc.local" ];then + touch /etc/rc.local + chmod +x /etc/rc.local +fi + +# ensure that the ssh key exists and is an authorized_key +ssh_key_create + +# prepare the storage appropriately +configure_diskspace + +# build the loopback drive for swap to use +loopback_create /opt/swap.img 1024M thick swap + +# Ensure swap will be used on the host +sysctl -w vm.swappiness=10 | tee -a /etc/sysctl.conf + +# build the loopback drive for cinder to use +# but only if the cinder-volumes vg doesn't already exist +if ! vgs cinder-volumes > /dev/null 2>&1; then + CINDER="cinder.img" + loopback_create /opt/${CINDER} 10G thin rc + CINDER_DEVICE=$(losetup -a | awk -F: "/${CINDER}/ {print \$1}") + pvcreate ${CINDER_DEVICE} + pvscan + vgcreate cinder-volumes ${CINDER_DEVICE} +fi + +# build the loopback drives for swift to use +if [ "${DEPLOY_SWIFT}" == "yes" ]; then + for SWIFT in swift1.img swift2.img swift3.img; do + loopback_create /opt/${SWIFT} 10G thin none + if ! grep -q "^/opt/${SWIFT}" /etc/fstab; then + echo "/opt/${SWIFT} /srv/${SWIFT} xfs loop,noatime,nodiratime,nobarrier,logbufs=8 0 0" >> /etc/fstab + fi + if ! mount | grep -q "^/opt/${SWIFT}"; then + mkfs.xfs -f /opt/${SWIFT} + mkdir -p /srv/${SWIFT} + mount /srv/${SWIFT} + fi + done +fi + +# copy the required interfaces configuration file into place +IFACE_CFG_SOURCE="etc/network/interfaces.d/aio_interfaces.cfg" +IFACE_CFG_TARGET="/${IFACE_CFG_SOURCE}" +cp ${IFACE_CFG_SOURCE} ${IFACE_CFG_TARGET} + +# Ensure the network source is in place +if ! grep -q "^source /etc/network/interfaces.d/\*.cfg$" /etc/network/interfaces; then + echo -e "\nsource /etc/network/interfaces.d/*.cfg" | tee -a /etc/network/interfaces +fi + +# Set base DNS to google, ensuring consistent DNS in different environments +echo -e 'nameserver 8.8.8.8\nnameserver 8.8.4.4' | tee /etc/resolv.conf + +# Bring up the new interfaces +for iface in $(awk '/^iface/ {print $2}' ${IFACE_CFG_TARGET}); do + /sbin/ifup $iface || true +done + +# output an updated set of diagnostic information +get_instance_info + +# Final message +info_block "The system has been prepared for an all-in-one build." diff --git a/scripts/bootstrap-ansible.sh b/scripts/bootstrap-ansible.sh new file mode 100755 index 0000000000..a3f5d38ffc --- /dev/null +++ b/scripts/bootstrap-ansible.sh @@ -0,0 +1,111 @@ +#!/usr/bin/env bash +# Copyright 2014, Rackspace US, Inc. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +# (c) 2014, Kevin Carter + +set -e -u -v +x + +## Variables ----------------------------------------------------------------- + +ANSIBLE_DEPLOY_METHOD="pip" +ANSIBLE_GIT_REPO="https://github.com/ansible/ansible" +ANSIBLE_GIT_RELEASE="${ANSIBLE_GIT_RELEASE:-1.6.10}" +ANSIBLE_WORKING_DIR="/opt/ansible_v${ANSIBLE_GIT_RELEASE}" +GET_PIP_URL="${GET_PIP_URL:-https://mirror.rackspace.com/rackspaceprivatecloud/downloads/get-pip.py}" + +## Functions ----------------------------------------------------------------- + +info_block "Checking for required libraries." || source $(dirname ${0})/scripts-library.sh + +## Main ---------------------------------------------------------------------- + +# Enable logging of all commands executed +set -x + +# Install the base packages +apt-get update && apt-get -y install git python-all python-dev curl + +# Install pip +if [ ! "$(which pip)" ];then + curl ${GET_PIP_URL} > /opt/get-pip.py + python2 /opt/get-pip.py || python /opt/get-pip.py +fi + +if [ "${ANSIBLE_DEPLOY_METHOD}" == "git" ]; then + # If the working directory exists remove it + if [ -d "${ANSIBLE_WORKING_DIR}" ];then + rm -rf "${ANSIBLE_WORKING_DIR}" + fi + # Clone down the base ansible source + git clone "${ANSIBLE_GIT_REPO}" "${ANSIBLE_WORKING_DIR}" + pushd "${ANSIBLE_WORKING_DIR}" + git checkout "v${ANSIBLE_GIT_RELEASE}" + git submodule update --init --recursive + popd + # Install requirements if there are any + if [ -f "${ANSIBLE_WORKING_DIR}/requirements.txt" ];then + pip2 install -r "${ANSIBLE_WORKING_DIR}/requirements.txt" || pip install -r "${ANSIBLE_WORKING_DIR}/requirements.txt" + fi + # Install ansible + pip2 install "${ANSIBLE_WORKING_DIR}" || pip install "${ANSIBLE_WORKING_DIR}" +else + # Use pip to install ansible + pip install ansible==${ANSIBLE_GIT_RELEASE} +fi + +set +x +info_block "Ansible is now bootstrapped and ready for use." + +# Create openstack ansible wrapper tool +cat > /usr/local/bin/openstack-ansible < + +# Openstack wrapper tool to ease the use of ansible with multiple variable files. + +export PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" + +# Discover the variable files. +VAR1="\$(for i in \$(ls /etc/*_deploy/*user_*.yml); do echo -ne "-e @\$i "; done)" + +# Provide information on the discovered variables. +echo -e "\n--- [ Variable files ] ---\n \"\${VAR1}\"" + +# Run the ansible playbook command. +\$(which ansible-playbook) \${VAR1} \$@ +EOF + +set -x +# Ensure wrapper tool is executable +chmod +x /usr/local/bin/openstack-ansible + +# Enable logging of all commands executed +set +x + +info_block "The openstack-ansible convenience script has been created." diff --git a/scripts/gate-check-commit.sh b/scripts/gate-check-commit.sh new file mode 100755 index 0000000000..14fcb06119 --- /dev/null +++ b/scripts/gate-check-commit.sh @@ -0,0 +1,116 @@ +#!/usr/bin/env bash +# Copyright 2014, Rackspace US, Inc. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +## Shell Opts ---------------------------------------------------------------- + +set -e -u -v +x + +## Variables ----------------------------------------------------------------- + +ADMIN_PASSWORD=${ADMIN_PASSWORD:-"secrete"} +BOOTSTRAP_ANSIBLE=${BOOTSTRAP_ANSIBLE:-"yes"} +BOOTSTRAP_AIO=${BOOTSTRAP_AIO:-"yes"} +DEPLOY_SWIFT=${DEPLOY_SWIFT:-"yes"} +DEPLOY_TEMPEST=${DEPLOY_TEMPEST:-"no"} +RUN_PLAYBOOKS=${RUN_PLAYBOOKS:-"yes"} +RUN_TEMPEST=${RUN_TEMPEST:-"no"} +CONFIG_PREFIX=${CONFIG_PREFIX:-"rpc"} +PLAYBOOK_DIRECTORY=${PLAYBOOK_DIRECTORY:-"${CONFIG_PREFIX}_deployment"} +ANSIBLE_PARAMETERS=${ANSIBLE_PARAMETERS:-"--forks 10 -vvvv"} + +## Functions ----------------------------------------------------------------- + +info_block "Checking for required libraries." || source $(dirname ${0})/scripts-library.sh + +## Main ---------------------------------------------------------------------- + +# ensure that the current kernel can support vxlan +if ! modprobe vxlan; then + MINIMUM_KERNEL_VERSION=$(awk '/required_kernel/ {print $2}' ${PLAYBOOK_DIRECTORY}/inventory/group_vars/all.yml) + info_block "A minimum kernel version of ${MINIMUM_KERNEL_VERSION} is required for vxlan support." + exit 1 +fi + +# Get initial host information and reset verbosity +set +x && get_instance_info && set -x + +# Bootstrap ansible if required +if [ "${BOOTSTRAP_ANSIBLE}" == "yes" ]; then + source $(dirname ${0})/bootstrap-ansible.sh +fi + +# Bootstrap an AIO setup if required +if [ "${BOOTSTRAP_AIO}" == "yes" ]; then + source $(dirname ${0})/bootstrap-aio.sh +fi + +# Get initial host information and reset verbosity +set +x && get_instance_info && set -x + +# Install requirements +pip2 install -r requirements.txt || pip install -r requirements.txt + +# Copy the base etc files +if [ ! -d "/etc/${CONFIG_PREFIX}_deploy" ];then + cp -R etc/${CONFIG_PREFIX}_deploy /etc/ + + # Generate the passwords + USER_VARS_PATH="/etc/${CONFIG_PREFIX}_deploy/user_variables.yml" + + # Adjust any defaults to suit the AIO + # commented lines are removed by pw-token gen, so this substitution must + # happen prior. + sed -i "s/# nova_virt_type:.*/nova_virt_type: qemu/" ${USER_VARS_PATH} + + ./scripts/pw-token-gen.py --file ${USER_VARS_PATH} + + + # change the generated passwords for the OpenStack (admin) and Kibana (kibana) accounts + sed -i "s/keystone_auth_admin_password:.*/keystone_auth_admin_password: ${ADMIN_PASSWORD}/" ${USER_VARS_PATH} + sed -i "s/kibana_password:.*/kibana_password: ${ADMIN_PASSWORD}/" ${USER_VARS_PATH} + + if [ "${DEPLOY_SWIFT}" == "yes" ]; then + # ensure that glance is configured to use swift + sed -i "s/glance_default_store:.*/glance_default_store: swift/" ${USER_VARS_PATH} + sed -i "s/glance_swift_store_auth_address:.*/glance_swift_store_auth_address: '{{ auth_identity_uri }}'/" ${USER_VARS_PATH} + sed -i "s/glance_swift_store_container:.*/glance_swift_store_container: glance_images/" ${USER_VARS_PATH} + sed -i "s/glance_swift_store_key:.*/glance_swift_store_key: '{{ glance_service_password }}'/" ${USER_VARS_PATH} + sed -i "s/glance_swift_store_region:.*/glance_swift_store_region: RegionOne/" ${USER_VARS_PATH} + sed -i "s/glance_swift_store_user:.*/glance_swift_store_user: 'service:glance'/" ${USER_VARS_PATH} + fi + + if [ "${BOOTSTRAP_AIO}" == "yes" ]; then + # adjust the default user configuration for the AIO + USER_CONFIG_PATH="/etc/${CONFIG_PREFIX}_deploy/${CONFIG_PREFIX}_user_config.yml" + ENV_CONFIG_PATH="/etc/${CONFIG_PREFIX}_deploy/${CONFIG_PREFIX}_environment.yml" + sed -i "s/environment_version: .*/environment_version: $(md5sum ${ENV_CONFIG_PATH} | awk '{print $1}')/" ${USER_CONFIG_PATH} + SERVER_IP_ADDRESS="$(ip -o -4 addr show dev eth0 | awk -F '[ /]+' '/global/ {print $4}')" + sed -i "s/external_lb_vip_address: .*/external_lb_vip_address: ${SERVER_IP_ADDRESS}/" ${USER_CONFIG_PATH} + if [ "${DEPLOY_SWIFT}" == "yes" ]; then + # add the swift proxy host network provider map + sed -i 's/# - swift_proxy/- swift_proxy/' ${USER_CONFIG_PATH} + fi + fi +fi + +# Run the ansible playbooks if required +if [ "${RUN_PLAYBOOKS}" == "yes" ]; then + source $(dirname ${0})/run-playbooks.sh +fi + +# Run the tempest tests if required +if [ "${RUN_TEMPEST}" == "yes" ]; then + source $(dirname ${0})/run-tempest.sh +fi diff --git a/scripts/gate-check-lint.sh b/scripts/gate-check-lint.sh new file mode 100755 index 0000000000..53b50ec4fa --- /dev/null +++ b/scripts/gate-check-lint.sh @@ -0,0 +1,73 @@ +#!/usr/bin/env bash +# Copyright 2014, Rackspace US, Inc. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +## Shell Opts ---------------------------------------------------------------- + +set -e -u -v +x + +## Variables ----------------------------------------------------------------- + +BOOTSTRAP_ANSIBLE=${BOOTSTRAP_ANSIBLE:-"yes"} +PLAYBOOK_PATH=${PLAYBOOK_PATH:-"rpc_deployment/playbooks"} + +## Functions ----------------------------------------------------------------- + +info_block "Checking for required libraries." || source $(dirname ${0})/scripts-library.sh + +## Main ---------------------------------------------------------------------- + +# Enable logging of all commands executed +set -x + +# Bootstrap ansible if required +if [ "${BOOTSTRAP_ANSIBLE}" == "yes" ]; then + source $(dirname ${0})/bootstrap-ansible.sh +fi + +# Check whether pip or pip2 is available +if ! ( which pip > /dev/null && which pip2 > /dev/null ); then + info_block "ERROR: Please install pip before proceeding." + exit 1 +fi + +# Check whether ansible-playbook is available +if ! which ansible-playbook > /dev/null; then + info_block "ERROR: Please install ansible before proceeding." + exit 1 +fi + +# Install the development requirements +if [ -f dev-requirements.txt ]; then + pip2 install -r dev-requirements.txt || pip install -r dev-requirements.txt +else + pip2 install ansible-lint || pip install ansible-lint +fi + +# Perform our simple sanity checks +echo -e '[all]\nlocalhost ansible_connection=local' | tee local_only_inventory + +# Do a basic syntax check on all playbooks and roles +info_block "Running Syntax Check" +ansible-playbook -i local_only_inventory --syntax-check \ + $(find ${PLAYBOOK_PATH} -type f -name "*.yml" \ + ! -name "os-service-config-update.yml" \ + ! -name "host-network-setup.yml") + +# Perform a lint check on all playbooks and roles +info_block "Running Lint Check" +ansible-lint --version +ansible-lint $(find ${PLAYBOOK_PATH} -type f -name "*.yml" \ + ! -name "os-service-config-update.yml" \ + ! -name "host-network-setup.yml") diff --git a/scripts/labdelete.sh b/scripts/labdelete.sh deleted file mode 100755 index fa87774bfe..0000000000 --- a/scripts/labdelete.sh +++ /dev/null @@ -1,14 +0,0 @@ -#!/usr/bin/env bash -set -e -u -v -x -LAB=${1:-"uklab16_20"} -# Go to rpc_deployment directory -pushd ../rpc_deployment - -# Delete all containers -ansible-playbook -i inventory/${LAB}.yml \ - -e dinv=inventory/host_vars/${LAB}.yml \ - -e @inventory/overrides/${LAB}.yml \ - -e group=all \ - setup/destroy-containers.yml - -popd diff --git a/scripts/os-ansible-aio-check.sh b/scripts/os-ansible-aio-check.sh index 79834985e9..bf137103e2 100755 --- a/scripts/os-ansible-aio-check.sh +++ b/scripts/os-ansible-aio-check.sh @@ -1,488 +1,9 @@ -#!/usr/bin/env bash -# Copyright 2014, Rackspace US, Inc. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. +#!/bin/bash +# This is a placeholder until we change the macro for the +# os-ansible-deployment gate check script to use the +# newly split script set. -## Shell Opts ---------------------------------------------------------------- set -e -u -v -x -## Vars -FROZEN_REPO_URL=${FROZEN_REPO_URL:-"https://mirror.rackspace.com/rackspaceprivatecloud"} -MAX_RETRIES=${MAX_RETRIES:-5} -ADMIN_PASSWORD=${ADMIN_PASSWORD:-"secrete"} -DEPLOY_SWIFT=${DEPLOY_SWIFT:-"yes"} - -## Functions ----------------------------------------------------------------- - -# Get instance info -function get_instance_info(){ - free -mt - df -h - mount - lsblk - fdisk -l /dev/xv* /dev/sd* /dev/vd* - uname -a - pvs - vgs - lvs - which lscpu && lscpu - ip a - ip r - tracepath 8.8.8.8 -m 5 - which xenstore-read && xenstore-read vm-data/provider_data/provider ||: -} - -function configure_hp_diskspace(){ - # hp instances arrive with a 470GB drive (vdb) mounted at /mnt - # this function repurposes that for the lxc vg then creates a - # 50GB lv for /opt - mount |grep "/dev/vdb on /mnt" || return 0 # skip if not on hp - umount /mnt - pvcreate -ff -y /dev/vdb - vgcreate lxc /dev/vdb - lvcreate -n opt -L50g lxc - mkfs.ext4 /dev/lxc/opt - mount /dev/lxc/opt /opt - get_instance_info -} - -function key_create(){ - ssh-keygen -t rsa -f /root/.ssh/id_rsa -N '' -} - -# Used to retry process that may fail due to random issues. -function successerator() { - set +e - RETRY=0 - # Set the initial return value to failure - false - - while [ $? -ne 0 -a ${RETRY} -lt ${MAX_RETRIES} ];do - RETRY=$((${RETRY}+1)) - $@ - done - - if [ ${RETRY} -eq ${MAX_RETRIES} ];then - echo "Hit maximum number of retries, giving up..." - exit 1 - fi - set -e -} - -function install_bits() { - successerator ansible-playbook -e @/etc/rpc_deploy/user_variables.yml \ - playbooks/$@ -} - -function loopback_create() { - LOOP_FILENAME=${1} - LOOP_FILESIZE=${2} - if ! losetup -a | grep "(${LOOP_FILENAME})$" > /dev/null; then - LOOP_DEVICE=$(losetup -f) - dd if=/dev/zero of=${LOOP_FILENAME} bs=1 count=0 seek=${LOOP_FILESIZE} - losetup ${LOOP_DEVICE} ${LOOP_FILENAME} - fi -} - -## Main ---------------------------------------------------------------------- - -# update the package cache and install required packages -apt-get update -apt-get install -y python-dev \ - python2.7 \ - build-essential \ - curl \ - git-core \ - ipython \ - tmux \ - vim \ - vlan \ - bridge-utils \ - lvm2 \ - xfsprogs \ - linux-image-extra-$(uname -r) - -get_instance_info - -# Flush all the iptables rules set by openstack-infra -iptables -F -iptables -X -iptables -t nat -F -iptables -t nat -X -iptables -t mangle -F -iptables -t mangle -X -iptables -P INPUT ACCEPT -iptables -P FORWARD ACCEPT -iptables -P OUTPUT ACCEPT - -# Ensure newline at end of file (missing on Rackspace public cloud Trusty image) -if ! cat -E /etc/ssh/sshd_config | tail -1 | grep -q "\$$"; then - echo >> /etc/ssh/sshd_config -fi - -# Ensure that sshd permits root login, or ansible won't be able to connect -if grep "^PermitRootLogin" /etc/ssh/sshd_config > /dev/null; then - sed -i 's/^PermitRootLogin.*/PermitRootLogin yes/' /etc/ssh/sshd_config -else - echo 'PermitRootLogin yes' >> /etc/ssh/sshd_config -fi - - -# ensure that the current kernel can support vxlan -if ! modprobe vxlan; then - MINIMUM_KERNEL_VERSION=$(awk '/required_kernel/ {print $2}' rpc_deployment/inventory/group_vars/all.yml) - echo "A minimum kernel version of ${MINIMUM_KERNEL_VERSION} is required for vxlan support." - echo "This build will not work without it." - exit 1 -fi - -# create /opt if it doesn't already exist -if [ ! -d "/opt" ];then - mkdir /opt -fi - -configure_hp_diskspace - -# create /etc/rc.local if it doesn't already exist -if [ ! -f "/etc/rc.local" ];then - touch /etc/rc.local - chmod +x /etc/rc.local -fi - -# Make the system key used for bootstrapping self -if [ ! -d /root/.ssh ];then - mkdir -p /root/.ssh - chmod 700 /root/.ssh -fi -pushd /root/.ssh/ - if [ ! -f "id_rsa" ];then - key_create - fi - - if [ ! -f "id_rsa.pub" ];then - rm "id_rsa" - key_create - fi - - KEYENTRY=$(cat id_rsa.pub) - if [ ! "$(grep \"$KEYENTRY\" authorized_keys)" ];then - echo "$KEYENTRY" | tee -a authorized_keys - fi -popd - -# build the loopback drive for swap to use -if [ ! "$(swapon -s | grep -v Filename)" ]; then - dd if=/dev/zero of=/opt/swap.img bs=512M count=1 - mkswap /opt/swap.img - echo '/opt/swap.img none swap loop 0 0' >> /etc/fstab - swapon -a -fi - -# build the loopback drive for cinder to use -CINDER="cinder.img" -loopback_create /opt/${CINDER} 1000G -CINDER_DEVICE=$(losetup -a | awk -F: "/${CINDER}/ {print \$1}") -if ! pvs ${CINDER_DEVICE} > /dev/null; then - pvcreate ${CINDER_DEVICE} - pvscan -fi -if ! vgs cinder-volumes > /dev/null; then - vgcreate cinder-volumes ${CINDER_DEVICE} -fi - -# ensure that the cinder loopback is enabled after reboot -if ! grep ${CINDER} /etc/rc.local; then - sed -i "\$i losetup \$(losetup -f) /opt/${CINDER}" /etc/rc.local -fi - -if [ "${DEPLOY_SWIFT}" == "yes" ]; then - # build the loopback drives for swift to use - for SWIFT in swift1.img swift2.img swift3.img; do - loopback_create /opt/${SWIFT} 1000G - SWIFT_DEVICE=$(losetup -a | awk -F: "/${SWIFT}/ {print \$1}") - if ! grep "${SWIFT}" /etc/fstab > /dev/null; then - echo "/opt/${SWIFT} /srv/${SWIFT} xfs loop,noatime,nodiratime,nobarrier,logbufs=8 0 0" >> /etc/fstab - fi - if ! grep "${SWIFT}" /proc/mounts > /dev/null; then - mkfs.xfs -f ${SWIFT_DEVICE} - mkdir -p /srv/${SWIFT} - mount /srv/${SWIFT} - fi - done -fi - -# Copy the gate's repo to the expected location -mkdir -p /opt/ansible-lxc-rpc -cp -R * /opt/ansible-lxc-rpc - -pushd /opt/ansible-lxc-rpc - # Copy the base etc files - if [ -d "/etc/rpc_deploy" ];then - rm -rf "/etc/rpc_deploy" - fi - cp -R /opt/ansible-lxc-rpc/etc/rpc_deploy /etc/ - # Install pip - curl ${FROZEN_REPO_URL}/downloads/get-pip.py | python - # Install requirements - pip install -r /opt/ansible-lxc-rpc/requirements.txt - # Generate the passwords - /opt/ansible-lxc-rpc/scripts/pw-token-gen.py --file /etc/rpc_deploy/user_variables.yml -popd - -# change the generated passwords for the OpenStack (admin) and Kibana (kibana) accounts -sed -i "s/keystone_auth_admin_password:.*/keystone_auth_admin_password: ${ADMIN_PASSWORD}/" /etc/rpc_deploy/user_variables.yml -sed -i "s/kibana_password:.*/kibana_password: ${ADMIN_PASSWORD}/" /etc/rpc_deploy/user_variables.yml - -if [ "${DEPLOY_SWIFT}" == "yes" ]; then - # ensure that glance is configured to use swift - sed -i "s/glance_default_store:.*/glance_default_store: swift/" /etc/rpc_deploy/user_variables.yml - sed -i "s/glance_swift_store_auth_address:.*/glance_swift_store_auth_address: '{{ auth_identity_uri }}'/" /etc/rpc_deploy/user_variables.yml - sed -i "s/glance_swift_store_container:.*/glance_swift_store_container: glance_images/" /etc/rpc_deploy/user_variables.yml - sed -i "s/glance_swift_store_key:.*/glance_swift_store_key: '{{ glance_service_password }}'/" /etc/rpc_deploy/user_variables.yml - sed -i "s/glance_swift_store_region:.*/glance_swift_store_region: RegionOne/" /etc/rpc_deploy/user_variables.yml - sed -i "s/glance_swift_store_user:.*/glance_swift_store_user: 'service:glance'/" /etc/rpc_deploy/user_variables.yml -fi - -# build the required user configuration -cat > /etc/rpc_deploy/rpc_user_config.yml <> /etc/rpc_deploy/rpc_user_config.yml < /etc/rpc_deploy/conf.d/swift.yml <> /etc/rpc_deploy/rpc_user_config.yml < /etc/network/interfaces.d/aio-bridges.cfg < /etc/update-motd.d/20-openstack<< EOF #!/usr/bin/env bash echo "" -echo "############ ansible-os-deployment all-in-one build #############" +echo "############ os-ansible-deployment all-in-one build #############" +echo "" +echo " OpenStack Services are now listening on $(ip -o -4 addr show dev eth0 | awk -F '[ /]+' '/global/ {print $4}')" +echo "" +EOF +chmod +x /etc/update-motd.d/20-openstack + +# put an motd in place to help the user know how to restart galera after reboot +cat > /etc/update-motd.d/21-galera<< EOF +#!/usr/bin/env bash +echo "" echo "If this server has been rebooted, you will need to re-bootstrap" echo "Galera to get the cluster operational. To do this execute:" echo "" echo "cd /opt/ansible-lxc-rpc/rpc_deployment" echo "ansible-playbook -e @/etc/rpc_deploy/user_variables.yml playbooks/infrastructure/galera-startup.yml" +echo "" EOF -chmod +x /etc/update-motd.d/20-openstack - -# run the same aio build script that is used in the OpenStack CI pipeline -cd ${WORKING_FOLDER} -./scripts/os-ansible-aio-check.sh +chmod +x /etc/update-motd.d/21-galera diff --git a/scripts/run-playbooks.sh b/scripts/run-playbooks.sh new file mode 100755 index 0000000000..ab2d417e78 --- /dev/null +++ b/scripts/run-playbooks.sh @@ -0,0 +1,116 @@ +#!/usr/bin/env bash +# Copyright 2014, Rackspace US, Inc. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +## Shell Opts ---------------------------------------------------------------- + +set -e -u -v +x + +## Variables ----------------------------------------------------------------- + +DEPLOY_HOST=${DEPLOY_HOST:-"yes"} +DEPLOY_LB=${DEPLOY_LB:-"yes"} +DEPLOY_INFRASTRUCTURE=${DEPLOY_INFRASTRUCTURE:-"yes"} +DEPLOY_LOGGING=${DEPLOY_LOGGING:-"yes"} +DEPLOY_OPENSTACK=${DEPLOY_OPENSTACK:-"yes"} +DEPLOY_SWIFT=${DEPLOY_SWIFT:-"yes"} +DEPLOY_RPC_SUPPORT=${DEPLOY_RPC_SUPPORT:-"yes"} +DEPLOY_TEMPEST=${DEPLOY_TEMPEST:-"no"} +ANSIBLE_PARAMETERS=${ANSIBLE_PARAMETERS:-"--forks 10"} +PLAYBOOK_DIRECTORY=${PLAYBOOK_DIRECTORY:-"rpc_deployment"} + +## Functions ----------------------------------------------------------------- + +info_block "Checking for required libraries." || source $(dirname ${0})/scripts-library.sh + +function install_bits() { + successerator openstack-ansible ${ANSIBLE_PARAMETERS} playbooks/$@ +} + +## Main ---------------------------------------------------------------------- + +# Initiate the deployment +pushd ${PLAYBOOK_DIRECTORY} + if [ "${DEPLOY_HOST}" == "yes" ]; then + # Install all host bits + install_bits setup/host-setup.yml + fi + + if [ "${DEPLOY_LB}" == "yes" ]; then + # Install haproxy for dev purposes only + install_bits infrastructure/haproxy-install.yml + fi + if [ "${DEPLOY_INFRASTRUCTURE}" == "yes" ]; then + # Install all of the infra bits + install_bits infrastructure/memcached-install.yml + install_bits infrastructure/galera-install.yml + install_bits infrastructure/rabbit-install.yml + if [ "${DEPLOY_LOGGING}" == "yes" ]; then + install_bits infrastructure/rsyslog-install.yml + install_bits infrastructure/elasticsearch-install.yml + install_bits infrastructure/logstash-install.yml + install_bits infrastructure/kibana-install.yml + install_bits infrastructure/es2unix-install.yml + fi + fi + + if [ "${DEPLOY_OPENSTACK}" == "yes" ]; then + # install all of the OpenStack Bits + if [ -f playbooks/openstack/openstack-common.yml ]; then + # cater for 9.x.x release (icehouse) + install_bits openstack/openstack-common.yml + fi + if [ -f playbooks/openstack/keystone-all.yml ]; then + # cater for 10.x.x release (juno) onwards + install_bits openstack/keystone-all.yml + else + # cater for 9.x.x release (icehouse) + install_bits openstack/keystone.yml + install_bits openstack/keystone-add-all-services.yml + fi + if [ "${DEPLOY_SWIFT}" == "yes" ]; then + install_bits openstack/swift-all.yml + fi + install_bits openstack/glance-all.yml + install_bits openstack/heat-all.yml + install_bits openstack/nova-all.yml + install_bits openstack/neutron-all.yml + install_bits openstack/cinder-all.yml + install_bits openstack/horizon-all.yml + if [ -f playbooks/openstack/utility-all.yml ]; then + # cater for 10.x.x release (juno) onwards + install_bits openstack/utility-all.yml + elif [ -f playbooks/openstack/utility.yml ]; then + # cater for 9.x.x release (icehouse) + install_bits openstack/utility.yml + fi + if [ "${DEPLOY_TEMPEST}" == "yes" ]; then + # Deploy tempest + install_bits openstack/tempest.yml + fi + fi + if [ "${DEPLOY_RPC_SUPPORT}" == "yes" ]; then + if [ -f playbooks/openstack/rpc-support-all.yml ]; then + # cater for 10.x.x release (juno) onwards + install_bits openstack/rpc-support-all.yml + elif [ -f playbooks/openstack/rpc-support.yml ]; then + # cater for 9.x.x release (icehouse) + install_bits openstack/rpc-support.yml + fi + fi + if [ "${DEPLOY_INFRASTRUCTURE}" == "yes" ] && [ "${DEPLOY_LOGGING}" == "yes" ]; then + # Configure Rsyslog + install_bits infrastructure/rsyslog-config.yml + fi +popd diff --git a/scripts/run-tempest.sh b/scripts/run-tempest.sh new file mode 100755 index 0000000000..d313156631 --- /dev/null +++ b/scripts/run-tempest.sh @@ -0,0 +1,61 @@ +#!/usr/bin/env bash +# Copyright 2014, Rackspace US, Inc. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +## Shell Opts ---------------------------------------------------------------- + +set -e -u -v +x + +## Variables ----------------------------------------------------------------- + +TEMPEST_SCRIPT_PATH=${TEMPEST_SCRIPT_PATH:-/root/rpc_tempest_gate.sh} +TEMPEST_SCRIPT_PARAMETERS=${TEMPEST_SCRIPT_PARAMETERS:-commit_aio} +CONFIG_PREFIX=${CONFIG_PREFIX:-"rpc"} +PLAYBOOK_DIRECTORY_PARENT=${PLAYBOOK_DIRECTORY_PARENT:-"${CONFIG_PREFIX}_deployment"} + +## Functions ----------------------------------------------------------------- + +info_block "Checking for required libraries." || source $(dirname ${0})/scripts-library.sh + +## Main ---------------------------------------------------------------------- + +# Check that ansible has been installed +if ! which ansible > /dev/null 2>&1; then + info_block "ERROR: Please ensure that ansible is installed." + exit 1 +fi + +# Check that we are in the root path of the cloned repo +if [ ! -d "etc" -a ! -d "scripts" -a ! -f "requirements.txt" ]; then + info_block "ERROR: Please execute this script from the root directory of the cloned source code." + exit 1 +fi + +pushd ${PLAYBOOK_DIRECTORY_PARENT} + # Check that there are utility containers + if ! ansible 'utility[0]' --list-hosts; then + info_block "ERROR: No utility containers have been deployed in your environment." + exit 99 + fi + + # Check that the utility container already has the required tempest script deployed + if ! ansible 'utility[0]' -m shell -a "ls -al ${TEMPEST_SCRIPT_PATH}"; then + info_block "ERROR: Please execute the 'os-tempest-install.yml' playbook prior to this script." + exit 99 + fi + + # Execute the tempest tests + info_block "Executing tempest tests" + ansible 'utility[0]' -m shell -a "${TEMPEST_SCRIPT_PATH} ${TEMPEST_SCRIPT_PARAMETERS}" +popd diff --git a/scripts/scripts-library.sh b/scripts/scripts-library.sh new file mode 100755 index 0000000000..c54505a5f4 --- /dev/null +++ b/scripts/scripts-library.sh @@ -0,0 +1,260 @@ +#!/usr/bin/env bash +# Copyright 2014, Rackspace US, Inc. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +## Variables ----------------------------------------------------------------- +LINE='-----------------------------------------------------------------------' +STARTTIME=${STARTTIME:-"$(date +%s)"} +REPORT_DATA="" +MAX_RETRIES=${MAX_RETRIES:-0} + +# Export known paths +export PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" + +# Override the current HOME directory +export HOME="/root" + +## Functions ----------------------------------------------------------------- + +# Output details provided as parameters +function print_info() { + set +x + PROC_NAME="- [ $@ ] -" + printf "\n%s%s\n" "$PROC_NAME" "${LINE:${#PROC_NAME}}" +} + +# Output a formatted block around a message +function info_block(){ + set +x + echo "${LINE}" + print_info "$@" + echo "${LINE}" +} + +# Output a formatted block of information about the run on exit +function exit_state() { + set +x + info_block "Run time reports" + echo -e "${REPORT_DATA}" + TOTALSECONDS="$[$(date +%s) - $STARTTIME]" + info_block "Run Time = ${TOTALSECONDS} seconds || $(($TOTALSECONDS / 60)) minutes" + if [ "${1}" == 0 ];then + info_block "Status: Build Success" + else + info_block "Status: Build Failure" + fi + exit ${1} +} + +# Exit with error details +function exit_fail() { + set +x + get_instance_info + info_block "Error Info - $@" + exit_state 1 +} + +# Output diagnostic information +function get_instance_info() { + set +x + info_block 'Path' + echo ${PATH} + info_block 'Current User' + whoami + info_block 'Home Directory' + echo ${HOME} + info_block 'Available Memory' + free -mt + info_block 'Available Disk Space' + df -h + info_block 'Mounted Devices' + mount + info_block 'Block Devices' + lsblk -i + info_block 'Block Devices Information' + blkid + info_block 'Block Device Partitions' + for blk_dev in $(lsblk -nrdo NAME,TYPE | awk '/disk/ {print $1}'); do + # Ignoring errors for the below command is important as sometimes + # the block device in question is unpartitioned or has an invalid + # partition. In this case, parted returns 'unrecognised disk label' + # and the bash script exits due to the -e environment setting. + parted /dev/$blk_dev print || true + done + info_block 'PV Information' + pvs + info_block 'VG Information' + vgs + info_block 'LV Information' + lvs + info_block 'Contents of /etc/fstab' + cat /etc/fstab + info_block 'CPU Information' + which lscpu && lscpu + info_block 'Kernel Information' + uname -a + info_block 'Container Information' + which lxc-ls && lxc-ls --fancy + info_block 'Firewall Information' + iptables -vnL + iptables -t nat -vnL + iptables -t mangle -vnL + info_block 'Network Devices' + ip a + info_block 'Network Routes' + ip r + info_block 'Trace Path from google' + tracepath 8.8.8.8 -m 5 + info_block 'XEN Server Information' + which xenstore-read && xenstore-read vm-data/provider_data/provider ||: +} + +# Used to retry a process that may fail due to transient issues +function successerator() { + set +e +x + # Get the time that the method was started. + OP_START_TIME="$(date +%s)" + MAX_ATTEMPTS=$((${MAX_RETRIES}+1)) + + for ATTEMPT in $(seq ${MAX_ATTEMPTS}); do + $@ && { report_success; return 0; } + done + + exit_fail "Hit maximum number of retries, giving up..." + set -e -x +} + +# Report success +function report_success() { + OP_TOTAL_SECONDS="$[$(date +%s) - $OP_START_TIME]" + REPORT_OUTPUT="${OP_TOTAL_SECONDS} seconds" + REPORT_DATA+="- Operation: [ $@ ]\t${REPORT_OUTPUT}\tNumber of Attempts [ ${ATTEMPT} ]\n" + print_info "Run Time = ${REPORT_OUTPUT}" +} + +function ssh_key_create(){ + # Ensure that the ssh key exists and is an authorized_key + key_path="${HOME}/.ssh" + key_file="${key_path}/id_rsa" + + # Ensure that the .ssh directory exists and has the right mode + if [ ! -d ${key_path} ]; then + mkdir -p ${key_path} + chmod 700 ${key_path} + fi + if [ ! -f "${key_file}" ] || [ ! -f "${key_file}.pub" ]; then + rm -f ${key_file}* + ssh-keygen -t rsa -f ${key_file} -N '' + fi + + # Ensure that the public key is included in the authorized_keys + # for the default root directory and the current home directory + key_content=$(cat "${key_file}.pub") + if ! grep -q "${key_content}" ${key_path}/authorized_keys; then + echo "${key_content}" | tee -a ${key_path}/authorized_keys + fi +} + +function configure_diskspace(){ + # If there are any block devices available other than the one + # used for the root disk, repurpose it for our needs. + + # the disk we use needs to have at least 60GB of space + min_disk_size_b=$((60 * 1024 * 1024 * 1024)) + + blk_devices=$(lsblk -nrdo NAME,TYPE | awk '/d[b-z]+ disk/ {print $1}') + for blk_dev in ${blk_devices}; do + # only do this if the cinder-volumes vg doesn't already exist + if ! vgs cinder-volumes > /dev/null 2>&1; then + + blk_dev_size_b=$(lsblk -nrdbo NAME,TYPE,SIZE | awk "/^${blk_dev} disk/ {print \$3}") + if [ "${blk_dev_size_b}" -gt "${min_disk_size_b}" ]; then + # dismount any mount points on the device + mount_points=$(awk "/^\/dev\/${blk_dev}[0-9]* / {print \$2}" /proc/mounts) + for mount_point in ${mount_points}; do + umount ${mount_point} + done + + #add a vg for cinder volumes + parted --script /dev/${blk_dev} mklabel gpt + parted --align optimal --script /dev/${blk_dev} mkpart cinder 0% 100% + pvcreate -ff -y /dev/${blk_dev}1 + vgcreate cinder-volumes /dev/${blk_dev}1 + + # add an lv for lxc to use + # it does not use it's own vg to ensure that the container disk usage + # is thin-provisioned in the simplest way as openstack-infra instances + # do not have enough disk space to handle thick-provisioned containers + lvcreate -n lxc -L50g cinder-volumes + + # prepare the file system and mount it + mkfs.ext4 /dev/cinder-volumes/lxc + mkdir -p /var/lib/lxc + mount /dev/cinder-volumes/lxc /var/lib/lxc + fi + + fi + done +} + +function loopback_create() { + LOOP_FILENAME=${1} + LOOP_FILESIZE=${2} + LOOP_FILE_TYPE=${3} # thin, thick + LOOP_MOUNT_METHOD=${4} # swap, rc, none + + if [ ! -f "${LOOP_FILENAME}" ]; then + if [ "${LOOP_FILE_TYPE}" = "thin" ]; then + truncate -s ${LOOP_FILESIZE} ${LOOP_FILENAME} + elif [ "${LOOP_FILE_TYPE}" = "thick" ]; then + dd if=/dev/zero of=${LOOP_FILENAME} bs=${LOOP_FILESIZE} count=1 + fi + fi + + if [ "${LOOP_MOUNT_METHOD}" = "rc" ]; then + if ! losetup -a | grep -q "(${LOOP_FILENAME})$"; then + LOOP_DEVICE=$(losetup -f) + losetup ${LOOP_DEVICE} ${LOOP_FILENAME} + fi + if ! grep -q ${LOOP_FILENAME} /etc/rc.local; then + sed -i "\$i losetup \$(losetup -f) ${LOOP_FILENAME}" /etc/rc.local + fi + fi + + if [ "${LOOP_MOUNT_METHOD}" = "swap" ]; then + if ! swapon -s | grep -q ${LOOP_FILENAME}; then + mkswap ${LOOP_FILENAME} + swapon -a + fi + if ! grep -q "^${LOOP_FILENAME} " /etc/fstab; then + echo "${LOOP_FILENAME} none swap loop 0 0" >> /etc/fstab + fi + fi +} + +# Exit if the script is not being run as root +if [ ! "$(whoami)" == "root" ]; then + info_block "This script must be run as root." + exit 1 +fi + +# Check that we are in the root path of the cloned repo +if [ ! -d "etc" -a ! -d "scripts" -a ! -f "requirements.txt" ]; then + info_block "ERROR: Please execute this script from the root directory of the cloned source code." + exit 1 +fi + +# Trap all Death Signals and Errors +trap "exit_fail ${LINENO} $? 'Received STOP Signal'" SIGHUP SIGINT SIGTERM +trap "exit_fail ${LINENO} $?" ERR