openstack-ansible/doc/source/install-guide-revised-draft/targethosts-networkexample.rst
daz 49c5d1daf9 [docs] Add draft install guide directory
Add draft directory but hide the link on the
index.rst so a preview build is available for patch
reviews

Change-Id: I40fdd4e6c0301c05641fc63643b40f409d5361c3
Implements: blueprint osa-install-guide-overhaul
2016-06-09 15:15:55 +10:00

185 lines
4.6 KiB
ReStructuredText
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

`Home <index.html>`_ OpenStack-Ansible Installation Guide
=========================================
Simple architecture: A single target host
=========================================
Overview
~~~~~~~~
This example uses the following parameters to configure networking on a
single target host. See `Figure 3.2, "Target hosts for infrastructure,
networking, compute, and storage
services" <targethosts-networkexample.html#fig_hosts-target-network-containerexample>`_
for a visual representation of these parameters in the architecture.
- VLANs:
- Host management: Untagged/Native
- Container management: 10
- Tunnels: 30
- Storage: 20
Networks:
- Host management: 10.240.0.0/22
- Container management: 172.29.236.0/22
- Tunnel: 172.29.240.0/22
- Storage: 172.29.244.0/22
Addresses:
- Host management: 10.240.0.11
- Host management gateway: 10.240.0.1
- DNS servers: 69.20.0.164 69.20.0.196
- Container management: 172.29.236.11
- Tunnel: 172.29.240.11
- Storage: 172.29.244.11
**Figure 3.2. Target host for infrastructure, networking, compute, and
storage services**
.. image:: figures/networkarch-container-external-example.png
Modifying the network interfaces file
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
After establishing the initial host management network connectivity using
the ``bond0`` interface, modify the ``/etc/network/interfaces`` file as
described in this procedure.
Contents of the ``/etc/network/interfaces`` file:
#. Physical interfaces:
.. code-block:: yaml
# Physical interface 1
auto eth0
iface eth0 inet manual
bond-master bond0
bond-primary eth0
# Physical interface 2
auto eth1
iface eth1 inet manual
bond-master bond1
bond-primary eth1
# Physical interface 3
auto eth2
iface eth2 inet manual
bond-master bond0
# Physical interface 4
auto eth3
iface eth3 inet manual
bond-master bond1
#. Bonding interfaces:
.. code-block:: yaml
# Bond interface 0 (physical interfaces 1 and 3)
auto bond0
iface bond0 inet static
bond-slaves eth0 eth2
bond-mode active-backup
bond-miimon 100
bond-downdelay 200
bond-updelay 200
address 10.240.0.11
netmask 255.255.252.0
gateway 10.240.0.1
dns-nameservers 69.20.0.164 69.20.0.196
# Bond interface 1 (physical interfaces 2 and 4)
auto bond1
iface bond1 inet manual
bond-slaves eth1 eth3
bond-mode active-backup
bond-miimon 100
bond-downdelay 250
bond-updelay 250
#. Logical (VLAN) interfaces:
.. code-block:: yaml
# Container management VLAN interface
iface bond0.10 inet manual
vlan-raw-device bond0
# OpenStack Networking VXLAN (tunnel/overlay) VLAN interface
iface bond1.30 inet manual
vlan-raw-device bond1
# Storage network VLAN interface (optional)
iface bond0.20 inet manual
vlan-raw-device bond0
#. Bridge devices:
.. code-block:: yaml
# Container management bridge
auto br-mgmt
iface br-mgmt inet static
bridge_stp off
bridge_waitport 0
bridge_fd 0
# Bridge port references tagged interface
bridge_ports bond0.10
address 172.29.236.11
netmask 255.255.252.0
dns-nameservers 69.20.0.164 69.20.0.196
# OpenStack Networking VXLAN (tunnel/overlay) bridge
auto br-vxlan
iface br-vxlan inet static
bridge_stp off
bridge_waitport 0
bridge_fd 0
# Bridge port references tagged interface
bridge_ports bond1.30
address 172.29.240.11
netmask 255.255.252.0
# OpenStack Networking VLAN bridge
auto br-vlan
iface br-vlan inet manual
bridge_stp off
bridge_waitport 0
bridge_fd 0
# Bridge port references untagged interface
bridge_ports bond1
# Storage bridge
auto br-storage
iface br-storage inet static
bridge_stp off
bridge_waitport 0
bridge_fd 0
# Bridge port reference tagged interface
bridge_ports bond0.20
address 172.29.244.11
netmask 255.255.252.0
--------------
.. include:: navigation.txt