openstack/openstack-helm-infra
Code Issues Proposed changes
f28ef6ded2
openstack-helm-infra/calico/values.yaml
Pete Birley 3c101a6324 dependencies: move dynamic common deps under a 'dynamic.common' key 
This PS moves existing dynamic common dependencies under a
'dynamic.common' key to simplify the yaml tree.

Change-Id: I4332bcfdf11197488e7bd5d8cf4c25565ea1c7b6
2018-02-24 17:42:10 -05:00

349 lines
9.5 KiB
YAML
Raw Blame History

# Copyright 2017 The Openstack-Helm Authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# http://docs.projectcalico.org/v2.4/getting-started/kubernetes/installation/hosted/kubeadm/1.6/calico.yaml
# Calico Version v2.4.1
# https://docs.projectcalico.org/v2.4/releases#v2.4.1
# This manifest includes the following component versions:
# calico/node:v2.4.1
# calico/cni:v1.10.0
# calico/kube-policy-controller:v0.7.0
labels:
node_selector_key: openstack-control-plane
node_selector_value: enabled
images:
tags:
calico_etcd: quay.io/coreos/etcd:v3.1.10
calico_node: quay.io/calico/node:v2.6.5
calico_cni: quay.io/calico/cni:v1.11.2
calico_cni: quay.io/calico/cni:v1.10.0
calico_ctl: quay.io/calico/ctl:v1.6.2
calico_settings: quay.io/calico/ctl:v1.6.2
calico_kube_policy_controller: quay.io/calico/kube-policy-controller:v0.7.0
dep_check: quay.io/stackanetes/kubernetes-entrypoint:v0.2.1
image_repo_sync: docker.io/docker:17.07.0
pull_policy: IfNotPresent
local_registry:
active: false
exclude:
- dep_check
- image_repo_sync
- calico_etcd
- calico_node
- calico_cni
- calico_kube_policy_controller
pod:
resources:
enabled: false
jobs:
image_repo_sync:
requests:
memory: "128Mi"
cpu: "100m"
limits:
memory: "1024Mi"
cpu: "2000m"
calico_settings:
requests:
memory: "128Mi"
cpu: "100m"
limits:
memory: "1024Mi"
cpu: "2000m"
calico_kube_policy_controller:
requests:
memory: "128Mi"
cpu: "100m"
limits:
memory: "1024Mi"
cpu: "2000m"
calico_node:
requests:
memory: "128Mi"
cpu: "100m"
limits:
memory: "1024Mi"
cpu: "2000m"
calico_cni:
requests:
memory: "128Mi"
cpu: "100m"
limits:
memory: "1024Mi"
cpu: "2000m"
calico_ctl:
requests:
memory: "128Mi"
cpu: "100m"
limits:
memory: "1024Mi"
cpu: "2000m"
calico_etcd:
requests:
memory: "128Mi"
cpu: "100m"
limits:
memory: "1024Mi"
cpu: "2000m"
lifecycle:
upgrades:
deployments:
revision_history: 3
pod_replacement_strategy: RollingUpdate
rolling_update:
max_unavailable: 1
max_surge: 3
disruption_budget:
policy_controller:
min_available: 0
termination_grace_period:
policy_controller:
timeout: 5
node:
timeout: 5
dependencies:
dynamic:
common:
local_image_registry:
jobs:
- calico-image-repo-sync
services:
- endpoint: node
service: local_image_registry
static:
calico_kube_policy_controllers:
services:
- endpoint: internal
service: etcd
calico_node:
services:
- endpoint: internal
service: etcd
calico_settings:
services:
- endpoint: internal
service: etcd
etcd:
services: null
endpoints:
cluster_domain_suffix: cluster.local
local_image_registry:
name: docker-registry
namespace: docker-registry
hosts:
default: localhost
internal: docker-registry
node: localhost
host_fqdn_override:
default: null
port:
registry:
node: 5000
etcd:
auth:
client:
tls:
crt: null
ca: null
key: null
path:
# these must be within /etc/calico
crt: /etc/calico/pki/crt
ca: /etc/calico/pki/ca
key: /etc/calico/pki/key
scheme:
default: http
path:
default: ' ' # space required to provide a truly empty path
hosts:
default: 10.96.232.136
host_fqdn_override:
default: null
service:
name: null
port:
client:
default: 6666
peer:
default: 6667
monitoring:
prometheus:
enabled: true
calico_node:
scrape: true
port: 9091
networking:
podSubnet: 192.168.0.0/16
#NOTE(portdirect): this should be the physical MTU, the appropriate MTU
# that calico should use will be calculated.
mtu: 1500
settings:
mesh: "on"
# technically this could be a list, today we only support
# a single podSubnet, the one above. The settings below
# will be applied to that ipPool
ippool:
ipip:
enabled: "true"
mode: "always"
nat_outgoing: "true"
disabled: "false"
bgp:
# our asnumber for bgp peering
asnumber: 64512
ipv4:
# this is a list of peer objects that will be passed
# directly to calicoctl - for global peers, the scope
# should be global and the node attribute removed
#
# apiVersion: v1
# kind: bgpPeer
# metadata:
# peerIP: 10.1.10.39
# scope: node
# node: hpnode1
# spec:
# asNumber: 64512
peers: []
# this is a list of additional IPv4 cidrs that if we
# discover IPs within them on a host, we will announce
# the address in addition to traditional pod workloads
additional_cidrs: []
mesh:
port:
neighbor: 179
listen: 179
no_mesh:
port:
neighbor: 179
listen: 179
ipv6:
# this is a list of peer objects that will be passed
# directly to calicoctl - for global peers, the scope
# should be global and the node attribute removed
#
# apiVersion: v1
# kind: bgpPeer
# metadata:
# peerIP: 2603:3024:1200:7500:7011:1dd6:1462:fa5b
# scope: node
# node: hpnode1
# spec:
# asNumber: 64512
peers: []
# this is a list of additional IPv6 cidrs that if we
# discover IPs within them on a host, we will announce
# them in addition to traditional pod workloads
additional_cidrs: []
mesh:
port:
neighbor: 179
listen: 179
no_mesh:
port:
neighbor: 179
listen: 179
conf:
etcd:
credentials:
ca: null
key: null
certificate: null
cni_network_config:
name: k8s-pod-network
cniVersion: 0.1.0
type: calico
etcd_endpoints: __ETCD_ENDPOINTS__
log_level: info
mtu: null
ipam:
type: calico-ipam
policy:
type: k8s
k8s_api_root: https://__KUBERNETES_SERVICE_HOST__:__KUBERNETES_SERVICE_PORT__
k8s_auth_token: __SERVICEACCOUNT_TOKEN__
kubernetes:
kubeconfig: "/etc/cni/net.d/__KUBECONFIG_FILENAME__"
policy_controller:
# The location of the Kubernetes API. Use the default Kubernetes
# service for API access.
K8S_API: "https://kubernetes.default:443"
# Choose which controllers to run.
ENABLED_CONTROLLERS: "policy,profile,workloadendpoint,node"
# Since we're running in the host namespace and might not have KubeDNS
# access, configure the container's /etc/hosts to resolve
# kubernetes.default to the correct service clusterIP.
CONFIGURE_ETC_HOSTS: "true"
node:
# Cluster type to identify the deployment type
CLUSTER_TYPE:
- kubeadm
- bgp
# Describes which BGP networking backend to use gobgp, bird, none. Default is bird.
# NOTE(alanmeadows) today this chart only supports applying the bgp customizations to
# bird templates - in the future we may support gobgp as well
CALICO_NETWORKING_BACKEND: bird
# Location of the CA certificate for etcd.
ETCD_CA_CERT_FILE: ""
# Location of the client key for etcd.
ETCD_KEY_FILE: ""
# Location of the client certificate for etcd.
ETCD_CERT_FILE: ""
# Disable file logging so `kubectl logs` works.
CALICO_DISABLE_FILE_LOGGING: "true"
# Set Felix endpoint to host default action to ACCEPT.
FELIX_DEFAULTENDPOINTTOHOSTACTION: "ACCEPT"
# Configure the IP Pool from which Pod IPs will be chosen.
CALICO_IPV4POOL_CIDR: null
# Change this to 'off' in environments with direct L2 communication
CALICO_IPV4POOL_IPIP: "always"
# Disable IPv6 on Kubernetes.
FELIX_IPV6SUPPORT: "false"
# Set MTU for tunnel device used if ipip is enabled
FELIX_IPINIPMTU: null
# Set Felix logging to "info"
FELIX_LOGSEVERITYSCREEN: "info"
FELIX_HEALTHENABLED: "true"
# Set Felix experimental Prometheus metrics server
FELIX_PROMETHEUSMETRICSENABLED: "true"
FELIX_PROMETHEUSMETRICSPORT: "9091"
# Auto-detect the BGP IP address.
IP: ""
# Detection of source interface for routing
# options include
# can-reach=DESTINATION
# interface=INTERFACE-REGEX
IP_AUTODETECTION_METHOD: first-found
IPV6_AUTODETECTION_METHOD: first-found
manifests:
configmap_bin: true
configmap_etc: true
daemonset_calico_etcd: true
daemonset_calico_node: true
daemonset_calico_node_calicoctl: true
deployment_calico_kube_policy_controllers: true
job_image_repo_sync: true
job_calico_settings: true
service_calico_etcd: true
secret_certificates: true
View Git Blame Copy Permalink