diff --git a/docs/guides-install/developer/install-minikube.md b/docs/guides-install/developer/install-minikube.md index a386a79448..8b20e9bb1e 100644 --- a/docs/guides-install/developer/install-minikube.md +++ b/docs/guides-install/developer/install-minikube.md @@ -65,13 +65,13 @@ kubectl update -f https://raw.githubusercontent.com/openstack/openstack-helm/mas kubectl label nodes openstack-control-plane=enabled --all --namespace=openstack # Deploy each chart: -helm install --name mariadb --set development.enabled=true local/mariadb --namespace=openstack +helm install --name mariadb local/mariadb --namespace=openstack --set development.enabled=true helm install --name=memcached local/memcached --namespace=openstack helm install --name=etcd-rabbitmq local/etcd --namespace=openstack helm install --name=rabbitmq local/rabbitmq --namespace=openstack helm install --name=keystone local/keystone --namespace=openstack helm install --name=cinder local/cinder --namespace=openstack -helm install --name=glance local/glance --namespace=openstack +helm install --name=glance local/glance --namespace=openstack --values=./glance/_values-mvp.yaml helm install --name=heat local/heat --namespace=openstack helm install --name=nova local/nova --namespace=openstack helm install --name=neutron local/neutron --namespace=openstack diff --git a/glance/_values-mvp.yaml b/glance/_values-mvp.yaml new file mode 100644 index 0000000000..d8c81f5ac9 --- /dev/null +++ b/glance/_values-mvp.yaml @@ -0,0 +1,29 @@ +# Copyright 2017 The Openstack-Helm Authors. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +# MVP values for glance. +# This file contains overrides to launch a MVP deployment of glance for the +# OpenStack-Helm Single node gates, and local development use. It should be +# kept to the bare minimum required for this purpose. + +storage: file + +conf: + glance: + glance_store: + glance: + store: + stores: file, http + default_store: file + filesystem_store_datadir: /var/lib/glance/images diff --git a/glance/templates/configmap-etc.yaml b/glance/templates/configmap-etc.yaml index bba3579dc2..c0a9247a97 100644 --- a/glance/templates/configmap-etc.yaml +++ b/glance/templates/configmap-etc.yaml @@ -11,6 +11,56 @@ # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. +{{- include "glance.conf.glance_values_skeleton" .Values.conf.glance | trunc 0 -}} +{{- include "glance.conf.glance_registry_values_skeleton" .Values.conf.glance_registry | trunc 0 -}} + +{{- if empty .Values.conf.glance.keystone_authtoken.keystonemiddleware.auth_token.auth_uri -}} +{{- tuple "identity" "internal" "api" . | include "helm-toolkit.keystone_endpoint_uri_lookup"| set .Values.conf.glance.keystone_authtoken.keystonemiddleware.auth_token "auth_uri" | quote | trunc 0 -}} +{{- end -}} +{{- if empty .Values.conf.glance_registry.keystone_authtoken.keystonemiddleware.auth_token.auth_uri -}} +{{- tuple "identity" "internal" "api" . | include "helm-toolkit.keystone_endpoint_uri_lookup"| set .Values.conf.glance_registry.keystone_authtoken.keystonemiddleware.auth_token "auth_uri" | quote | trunc 0 -}} +{{- end -}} + +# FIXME(alanmeadows) fix for broken keystonemiddleware oslo config gen in newton - will remove in future +{{- if empty .Values.conf.glance.keystone_authtoken.keystonemiddleware.auth_token.auth_url -}} +{{- tuple "identity" "internal" "api" . | include "helm-toolkit.keystone_endpoint_uri_lookup"| set .Values.conf.glance.keystone_authtoken.keystonemiddleware.auth_token "auth_url" | quote | trunc 0 -}} +{{- end -}} +{{- if empty .Values.conf.glance_registry.keystone_authtoken.keystonemiddleware.auth_token.auth_url -}} +{{- tuple "identity" "internal" "api" . | include "helm-toolkit.keystone_endpoint_uri_lookup"| set .Values.conf.glance_registry.keystone_authtoken.keystonemiddleware.auth_token "auth_url" | quote | trunc 0 -}} +{{- end -}} + +{{- if empty .Values.conf.glance.keystone_authtoken.keystonemiddleware.auth_token.memcached_servers -}} +{{- tuple "oslo_cache" "internal" "memcache" . | include "helm-toolkit.hostname_endpoint_uri_lookup" | set .Values.conf.glance.keystone_authtoken.keystonemiddleware.auth_token "memcached_servers" | quote | trunc 0 -}} +{{- end -}} +{{- if empty .Values.conf.glance_registry.keystone_authtoken.keystonemiddleware.auth_token.memcached_servers -}} +{{- tuple "oslo_cache" "internal" "memcache" . | include "helm-toolkit.hostname_endpoint_uri_lookup" | set .Values.conf.glance_registry.keystone_authtoken.keystonemiddleware.auth_token "memcached_servers" | quote | trunc 0 -}} +{{- end -}} + +{{- if empty .Values.conf.glance.database.oslo.db.connection -}} +{{- tuple "oslo_db" "internal" "user" "mysql" . | include "helm-toolkit.authenticated_endpoint_uri_lookup"| set .Values.conf.glance.database.oslo.db "connection" | quote | trunc 0 -}} +{{- end -}} +{{- if empty .Values.conf.glance_registry.database.oslo.db.connection -}} +{{- tuple "oslo_db" "internal" "user" "mysql" . | include "helm-toolkit.authenticated_endpoint_uri_lookup"| set .Values.conf.glance_registry.database.oslo.db "connection" | quote | trunc 0 -}} +{{- end -}} + +{{- if empty .Values.conf.glance.default.oslo.messaging.transport_url -}} +{{- tuple "oslo_messaging" "internal" "user" "amqp" . | include "helm-toolkit.authenticated_endpoint_uri_lookup" | set .Values.conf.glance.default.oslo.messaging "transport_url" | quote | trunc 0 -}} +{{- end -}} +{{- if empty .Values.conf.glance_registry.default.oslo.messaging.transport_url -}} +{{- tuple "oslo_messaging" "internal" "user" "amqp" . | include "helm-toolkit.authenticated_endpoint_uri_lookup" | set .Values.conf.glance_registry.default.oslo.messaging "transport_url" | quote | trunc 0 -}} +{{- end -}} + +{{- if empty .Values.conf.glance.default.glance.api.registry_host -}} +{{- $imageRegistry := tuple "image_registry" "internal" "api" . | include "helm-toolkit.hostname_endpoint_uri_lookup" }} +{{- $imageRegistryHostURI := split ":" $imageRegistry -}} +{{- $imageRegistryHostURI._0 | set .Values.conf.glance.default.glance.api "registry_host" | quote | trunc 0 -}} +{{- end -}} + +{{- if empty .Values.conf.glance.default.glance.api.registry_port -}} +{{- $imageRegistry := tuple "image_registry" "internal" "api" . | include "helm-toolkit.hostname_endpoint_uri_lookup" }} +{{- $imageRegistryHostURI := split ":" $imageRegistry -}} +{{- $imageRegistryHostURI._1 | set .Values.conf.glance.default.glance.api "registry_port" | quote | trunc 0 -}} +{{- end -}} apiVersion: v1 kind: ConfigMap @@ -18,16 +68,80 @@ metadata: name: glance-etc data: ceph.conf: |+ +{{ if .Values.conf.ceph.override -}} +{{ .Values.conf.ceph.override | indent 4 }} +{{- else -}} +{{- if .Values.conf.ceph.prefix -}} +{{ .Values.conf.ceph.prefix | indent 4 }} +{{- end }} {{ tuple "etc/_ceph.conf.tpl" . | include "helm-toolkit.template" | indent 4 }} - ceph.client.{{ .Values.ceph.glance_user }}.keyring: |+ +{{- end }} +{{- if .Values.conf.ceph.append -}} +{{ .Values.conf.ceph.append | indent 4 }} +{{- end }} + ceph.client.{{ .Values.conf.glance.glance_store.glance.store.rbd_store_user }}.keyring: |+ +{{ if .Values.conf.ceph_client.override -}} +{{ .Values.conf.ceph_client.override | indent 4 }} +{{- else -}} +{{- if .Values.conf.ceph_client.prefix -}} +{{ .Values.conf.ceph_client.prefix | indent 4 }} +{{- end }} {{ tuple "etc/_ceph.client.glance.keyring.tpl" . | include "helm-toolkit.template" | indent 4 }} +{{- end }} +{{- if .Values.conf.ceph_client.append -}} +{{ .Values.conf.ceph_client.append | indent 4 }} +{{- end }} glance-api.conf: |+ +{{ if .Values.conf.glance.override -}} +{{ .Values.conf.glance.override | indent 4 }} +{{- else -}} +{{- if .Values.conf.glance.prefix -}} +{{ .Values.conf.glance.prefix | indent 4 }} +{{- end }} {{ tuple "etc/_glance-api.conf.tpl" . | include "helm-toolkit.template" | indent 4 }} +{{- end }} +{{- if .Values.conf.glance.append -}} +{{ .Values.conf.glance.append | indent 4 }} +{{- end }} glance-api-paste.ini: |+ +{{ if .Values.conf.paste.override -}} +{{ .Values.conf.paste.override | indent 4 }} +{{- else -}} +{{- if .Values.conf.paste.prefix -}} +{{ .Values.conf.paste.prefix | indent 4 }} +{{- end }} {{ tuple "etc/_glance-api-paste.ini.tpl" . | include "helm-toolkit.template" | indent 4 }} +{{- end }} +{{- if .Values.conf.paste.append -}} +{{ .Values.conf.paste.append | indent 4 }} +{{- end }} glance-registry.conf: |+ +{{ if .Values.conf.glance_registry.override -}} +{{ .Values.conf.glance_registry.override | indent 4 }} +{{- else -}} +{{- if .Values.conf.glance_registry.prefix -}} +{{ .Values.conf.glance_registry.prefix | indent 4 }} +{{- end }} {{ tuple "etc/_glance-registry.conf.tpl" . | include "helm-toolkit.template" | indent 4 }} +{{- end }} +{{- if .Values.conf.glance_registry.append -}} +{{ .Values.conf.glance_registry.append | indent 4 }} +{{- end }} glance-registry-paste.ini: |+ +{{ if .Values.conf.paste_registry.override -}} +{{ .Values.conf.paste_registry.override | indent 4 }} +{{- else -}} +{{- if .Values.conf.paste_registry.prefix -}} +{{ .Values.conf.paste_registry.prefix | indent 4 }} +{{- end }} {{ tuple "etc/_glance-registry-paste.ini.tpl" . | include "helm-toolkit.template" | indent 4 }} +{{- end }} +{{- if .Values.conf.paste_registry.append -}} +{{ .Values.conf.paste_registry.append | indent 4 }} +{{- end }} policy.json: |+ +{{ if .Values.conf.policy.override -}} +{{ .Values.conf.policy.override | indent 4 }} +{{- else -}} {{ tuple "etc/_policy.json.tpl" . | include "helm-toolkit.template" | indent 4 }} +{{- end }} diff --git a/glance/templates/deployment-api.yaml b/glance/templates/deployment-api.yaml index 522e6faa42..104d3eee26 100644 --- a/glance/templates/deployment-api.yaml +++ b/glance/templates/deployment-api.yaml @@ -19,11 +19,7 @@ kind: Deployment metadata: name: glance-api spec: -{{- if .Values.development.enabled }} - replicas: 1 -{{- else }} replicas: {{ .Values.replicas.api }} -{{- end }} revisionHistoryLimit: {{ .Values.upgrades.revision_history }} strategy: type: {{ .Values.upgrades.pod_replacement_strategy }} @@ -63,10 +59,10 @@ spec: - --config-file - /etc/glance/glance-api.conf ports: - - containerPort: {{ .Values.network.api.port }} + - containerPort: {{ .Values.conf.glance.default.glance.api.bind_port }} readinessProbe: tcpSocket: - port: {{ .Values.network.api.port }} + port: {{ .Values.conf.glance.default.glance.api.bind_port }} volumeMounts: - name: etcglance mountPath: /etc/glance @@ -82,9 +78,9 @@ spec: mountPath: /etc/glance/policy.json subPath: policy.json readOnly: true -{{- if .Values.development.enabled }} - - name: glance-data - mountPath: /var/lib/glance/images +{{- if eq .Values.storage "file" }} + - name: glance-images + mountPath: {{ .Values.conf.glance.glance_store.glance.store.filesystem_store_datadir }} {{- else }} - name: cephconf mountPath: /etc/ceph/ceph.conf @@ -102,10 +98,10 @@ spec: - name: glanceapipaste configMap: name: glance-etc -{{- if .Values.development.enabled }} - - name: glance-data - hostPath: - path: {{ .Values.development.storage_path }} +{{- if eq .Values.storage "file" }} + - name: glance-images + persistentVolumeClaim: + claimName: glance-images {{- else }} - name: cephconf configMap: diff --git a/glance/templates/deployment-registry.yaml b/glance/templates/deployment-registry.yaml index 0ae421662e..2c03dbe778 100644 --- a/glance/templates/deployment-registry.yaml +++ b/glance/templates/deployment-registry.yaml @@ -19,11 +19,7 @@ kind: Deployment metadata: name: glance-registry spec: -{{- if .Values.development.enabled }} - replicas: 1 -{{- else }} replicas: {{ .Values.replicas.registry }} -{{- end }} template: metadata: labels: @@ -41,7 +37,7 @@ spec: - name: glance-registry image: {{ .Values.images.registry }} imagePullPolicy: {{ .Values.images.pull_policy }} - {{- if .Values.resources.enabled }} + {{- if .Values.resources.enabled }} resources: limits: cpu: {{ .Values.resources.registry.limits.cpu | quote }} @@ -55,10 +51,10 @@ spec: - --config-file - /etc/glance/glance-registry.conf ports: - - containerPort: {{ .Values.network.registry.port }} + - containerPort: {{ .Values.conf.glance_registry.default.glance.registry.bind_port }} readinessProbe: tcpSocket: - port: {{ .Values.network.registry.port }} + port: {{ .Values.conf.glance_registry.default.glance.registry.bind_port }} volumeMounts: - name: etcglance mountPath: /etc/glance diff --git a/glance/templates/etc/_glance-api-paste.ini.tpl b/glance/templates/etc/_glance-api-paste.ini.tpl index 186e889e67..687902743a 100644 --- a/glance/templates/etc/_glance-api-paste.ini.tpl +++ b/glance/templates/etc/_glance-api-paste.ini.tpl @@ -1,17 +1,3 @@ -# Copyright 2017 The Openstack-Helm Authors. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - # Use this pipeline for no auth or image caching - DEFAULT [pipeline:glance-api] pipeline = cors healthcheck http_proxy_to_wsgi versionnegotiation osprofiler unauthenticated-context rootapp diff --git a/glance/templates/etc/_glance-api.conf.tpl b/glance/templates/etc/_glance-api.conf.tpl index ff95c57495..44da10a784 100644 --- a/glance/templates/etc/_glance-api.conf.tpl +++ b/glance/templates/etc/_glance-api.conf.tpl @@ -12,48 +12,4732 @@ # See the License for the specific language governing permissions and # limitations under the License. -[DEFAULT] -debug = {{ .Values.misc.debug }} -use_syslog = False -use_stderr = True +{{ include "glance.conf.glance_values_skeleton" .Values.conf.glance | trunc 0 }} +{{ include "glance.conf.glance" .Values.conf.glance }} + + +{{- define "glance.conf.glance_values_skeleton" -}} + +{{- if not .default -}}{{- set . "default" dict -}}{{- end -}} +{{- if not .default.glance -}}{{- set .default "glance" dict -}}{{- end -}} +{{- if not .default.glance.api -}}{{- set .default.glance "api" dict -}}{{- end -}} +{{- if not .default.oslo -}}{{- set .default "oslo" dict -}}{{- end -}} +{{- if not .default.oslo.log -}}{{- set .default.oslo "log" dict -}}{{- end -}} +{{- if not .default.oslo.messaging -}}{{- set .default.oslo "messaging" dict -}}{{- end -}} +{{- if not .cors -}}{{- set . "cors" dict -}}{{- end -}} +{{- if not .cors.oslo -}}{{- set .cors "oslo" dict -}}{{- end -}} +{{- if not .cors.oslo.middleware -}}{{- set .cors.oslo "middleware" dict -}}{{- end -}} +{{- if not .cors.oslo.middleware.cors -}}{{- set .cors.oslo.middleware "cors" dict -}}{{- end -}} +{{- if not .cors.subdomain -}}{{- set .cors "subdomain" dict -}}{{- end -}} +{{- if not .cors.subdomain.oslo -}}{{- set .cors.subdomain "oslo" dict -}}{{- end -}} +{{- if not .cors.subdomain.oslo.middleware -}}{{- set .cors.subdomain.oslo "middleware" dict -}}{{- end -}} +{{- if not .cors.subdomain.oslo.middleware.cors -}}{{- set .cors.subdomain.oslo.middleware "cors" dict -}}{{- end -}} +{{- if not .database -}}{{- set . "database" dict -}}{{- end -}} +{{- if not .database.oslo -}}{{- set .database "oslo" dict -}}{{- end -}} +{{- if not .database.oslo.db -}}{{- set .database.oslo "db" dict -}}{{- end -}} +{{- if not .database.oslo.db.concurrency -}}{{- set .database.oslo.db "concurrency" dict -}}{{- end -}} +{{- if not .glance_store -}}{{- set . "glance_store" dict -}}{{- end -}} +{{- if not .glance_store.glance -}}{{- set .glance_store "glance" dict -}}{{- end -}} +{{- if not .glance_store.glance.store -}}{{- set .glance_store.glance "store" dict -}}{{- end -}} +{{- if not .image_format -}}{{- set . "image_format" dict -}}{{- end -}} +{{- if not .image_format.glance -}}{{- set .image_format "glance" dict -}}{{- end -}} +{{- if not .image_format.glance.api -}}{{- set .image_format.glance "api" dict -}}{{- end -}} +{{- if not .keystone_authtoken -}}{{- set . "keystone_authtoken" dict -}}{{- end -}} +{{- if not .keystone_authtoken.keystonemiddleware -}}{{- set .keystone_authtoken "keystonemiddleware" dict -}}{{- end -}} +{{- if not .keystone_authtoken.keystonemiddleware.auth_token -}}{{- set .keystone_authtoken.keystonemiddleware "auth_token" dict -}}{{- end -}} +{{- if not .matchmaker_redis -}}{{- set . "matchmaker_redis" dict -}}{{- end -}} +{{- if not .matchmaker_redis.oslo -}}{{- set .matchmaker_redis "oslo" dict -}}{{- end -}} +{{- if not .matchmaker_redis.oslo.messaging -}}{{- set .matchmaker_redis.oslo "messaging" dict -}}{{- end -}} +{{- if not .oslo_concurrency -}}{{- set . "oslo_concurrency" dict -}}{{- end -}} +{{- if not .oslo_concurrency.oslo -}}{{- set .oslo_concurrency "oslo" dict -}}{{- end -}} +{{- if not .oslo_concurrency.oslo.concurrency -}}{{- set .oslo_concurrency.oslo "concurrency" dict -}}{{- end -}} +{{- if not .oslo_messaging_amqp -}}{{- set . "oslo_messaging_amqp" dict -}}{{- end -}} +{{- if not .oslo_messaging_amqp.oslo -}}{{- set .oslo_messaging_amqp "oslo" dict -}}{{- end -}} +{{- if not .oslo_messaging_amqp.oslo.messaging -}}{{- set .oslo_messaging_amqp.oslo "messaging" dict -}}{{- end -}} +{{- if not .oslo_messaging_notifications -}}{{- set . "oslo_messaging_notifications" dict -}}{{- end -}} +{{- if not .oslo_messaging_notifications.oslo -}}{{- set .oslo_messaging_notifications "oslo" dict -}}{{- end -}} +{{- if not .oslo_messaging_notifications.oslo.messaging -}}{{- set .oslo_messaging_notifications.oslo "messaging" dict -}}{{- end -}} +{{- if not .oslo_messaging_rabbit -}}{{- set . "oslo_messaging_rabbit" dict -}}{{- end -}} +{{- if not .oslo_messaging_rabbit.oslo -}}{{- set .oslo_messaging_rabbit "oslo" dict -}}{{- end -}} +{{- if not .oslo_messaging_rabbit.oslo.messaging -}}{{- set .oslo_messaging_rabbit.oslo "messaging" dict -}}{{- end -}} +{{- if not .oslo_messaging_zmq -}}{{- set . "oslo_messaging_zmq" dict -}}{{- end -}} +{{- if not .oslo_messaging_zmq.oslo -}}{{- set .oslo_messaging_zmq "oslo" dict -}}{{- end -}} +{{- if not .oslo_messaging_zmq.oslo.messaging -}}{{- set .oslo_messaging_zmq.oslo "messaging" dict -}}{{- end -}} +{{- if not .oslo_middleware -}}{{- set . "oslo_middleware" dict -}}{{- end -}} +{{- if not .oslo_middleware.oslo -}}{{- set .oslo_middleware "oslo" dict -}}{{- end -}} +{{- if not .oslo_middleware.oslo.middleware -}}{{- set .oslo_middleware.oslo "middleware" dict -}}{{- end -}} +{{- if not .oslo_middleware.oslo.middleware.http_proxy_to_wsgi -}}{{- set .oslo_middleware.oslo.middleware "http_proxy_to_wsgi" dict -}}{{- end -}} +{{- if not .oslo_policy -}}{{- set . "oslo_policy" dict -}}{{- end -}} +{{- if not .oslo_policy.oslo -}}{{- set .oslo_policy "oslo" dict -}}{{- end -}} +{{- if not .oslo_policy.oslo.policy -}}{{- set .oslo_policy.oslo "policy" dict -}}{{- end -}} +{{- if not .paste_deploy -}}{{- set . "paste_deploy" dict -}}{{- end -}} +{{- if not .paste_deploy.glance -}}{{- set .paste_deploy "glance" dict -}}{{- end -}} +{{- if not .paste_deploy.glance.api -}}{{- set .paste_deploy.glance "api" dict -}}{{- end -}} +{{- if not .profiler -}}{{- set . "profiler" dict -}}{{- end -}} +{{- if not .profiler.glance -}}{{- set .profiler "glance" dict -}}{{- end -}} +{{- if not .profiler.glance.api -}}{{- set .profiler.glance "api" dict -}}{{- end -}} +{{- if not .store_type_location_strategy -}}{{- set . "store_type_location_strategy" dict -}}{{- end -}} +{{- if not .store_type_location_strategy.glance -}}{{- set .store_type_location_strategy "glance" dict -}}{{- end -}} +{{- if not .store_type_location_strategy.glance.api -}}{{- set .store_type_location_strategy.glance "api" dict -}}{{- end -}} +{{- if not .task -}}{{- set . "task" dict -}}{{- end -}} +{{- if not .task.glance -}}{{- set .task "glance" dict -}}{{- end -}} +{{- if not .task.glance.api -}}{{- set .task.glance "api" dict -}}{{- end -}} +{{- if not .taskflow_executor -}}{{- set . "taskflow_executor" dict -}}{{- end -}} +{{- if not .taskflow_executor.glance -}}{{- set .taskflow_executor "glance" dict -}}{{- end -}} +{{- if not .taskflow_executor.glance.api -}}{{- set .taskflow_executor.glance "api" dict -}}{{- end -}} + +{{- end -}} + + +{{- define "glance.conf.glance" -}} + +[DEFAULT] + +# +# From glance.api +# + +# +# Set the image owner to tenant or the authenticated user. +# +# Assign a boolean value to determine the owner of an image. When set to +# True, the owner of the image is the tenant. When set to False, the +# owner of the image will be the authenticated user issuing the request. +# Setting it to False makes the image private to the associated user and +# sharing with other users within the same tenant (or "project") +# requires explicit image sharing via image membership. +# +# Possible values: +# * True +# * False +# +# Related options: +# * None +# +# (boolean value) +# from .default.glance.api.owner_is_tenant +{{ if not .default.glance.api.owner_is_tenant }}#{{ end }}owner_is_tenant = {{ .default.glance.api.owner_is_tenant | default "true" }} + +# +# Role used to identify an authenticated user as administrator. +# +# Provide a string value representing a Keystone role to identify an +# administrative user. Users with this role will be granted +# administrative privileges. The default value for this option is +# 'admin'. +# +# Possible values: +# * A string value which is a valid Keystone role +# +# Related options: +# * None +# +# (string value) +# from .default.glance.api.admin_role +{{ if not .default.glance.api.admin_role }}#{{ end }}admin_role = {{ .default.glance.api.admin_role | default "admin" }} + +# +# Allow limited access to unauthenticated users. +# +# Assign a boolean to determine API access for unathenticated +# users. When set to False, the API cannot be accessed by +# unauthenticated users. When set to True, unauthenticated users can +# access the API with read-only privileges. This however only applies +# when using ContextMiddleware. +# +# Possible values: +# * True +# * False +# +# Related options: +# * None +# +# (boolean value) +# from .default.glance.api.allow_anonymous_access +{{ if not .default.glance.api.allow_anonymous_access }}#{{ end }}allow_anonymous_access = {{ .default.glance.api.allow_anonymous_access | default "false" }} + +# +# Limit the request ID length. +# +# Provide an integer value to limit the length of the request ID to +# the specified length. The default value is 64. Users can change this +# to any ineteger value between 0 and 16384 however keeping in mind that +# a larger value may flood the logs. +# +# Possible values: +# * Integer value between 0 and 16384 +# +# Related options: +# * None +# +# (integer value) +# Minimum value: 0 +# from .default.glance.api.max_request_id_length +{{ if not .default.glance.api.max_request_id_length }}#{{ end }}max_request_id_length = {{ .default.glance.api.max_request_id_length | default "64" }} + +# +# Public url endpoint to use for Glance/Glare versions response. +# +# This is the public url endpoint that will appear in the Glance/Glare +# "versions" response. If no value is specified, the endpoint that is +# displayed in the version's response is that of the host running the +# API service. Change the endpoint to represent the proxy URL if the +# API service is running behind a proxy. If the service is running +# behind a load balancer, add the load balancer's URL for this value. +# +# Possible values: +# * None +# * Proxy URL +# * Load balancer URL +# +# Related options: +# * None +# +# (string value) +# from .default.glance.api.public_endpoint +{{ if not .default.glance.api.public_endpoint }}#{{ end }}public_endpoint = {{ .default.glance.api.public_endpoint | default "" }} + +# +# Allow users to add additional/custom properties to images. +# +# Glance defines a standard set of properties (in its schema) that +# appear on every image. These properties are also known as +# ``base properties``. In addition to these properties, Glance +# allows users to add custom properties to images. These are known +# as ``additional properties``. +# +# By default, this configuration option is set to ``True`` and users +# are allowed to add additional properties. The number of additional +# properties that can be added to an image can be controlled via +# ``image_property_quota`` configuration option. +# +# Possible values: +# * True +# * False +# +# Related options: +# * image_property_quota +# +# (boolean value) +# from .default.glance.api.allow_additional_image_properties +{{ if not .default.glance.api.allow_additional_image_properties }}#{{ end }}allow_additional_image_properties = {{ .default.glance.api.allow_additional_image_properties | default "true" }} + +# +# Maximum number of image members per image. +# +# This limits the maximum of users an image can be shared with. Any negative +# value is interpreted as unlimited. +# +# Related options: +# * None +# +# (integer value) +# from .default.glance.api.image_member_quota +{{ if not .default.glance.api.image_member_quota }}#{{ end }}image_member_quota = {{ .default.glance.api.image_member_quota | default "128" }} + +# +# Maximum number of properties allowed on an image. +# +# This enforces an upper limit on the number of additional properties an image +# can have. Any negative value is interpreted as unlimited. +# +# NOTE: This won't have any impact if additional properties are disabled. Please +# refer to ``allow_additional_image_properties``. +# +# Related options: +# * ``allow_additional_image_properties`` +# +# (integer value) +# from .default.glance.api.image_property_quota +{{ if not .default.glance.api.image_property_quota }}#{{ end }}image_property_quota = {{ .default.glance.api.image_property_quota | default "128" }} + +# +# Maximum number of tags allowed on an image. +# +# Any negative value is interpreted as unlimited. +# +# Related options: +# * None +# +# (integer value) +# from .default.glance.api.image_tag_quota +{{ if not .default.glance.api.image_tag_quota }}#{{ end }}image_tag_quota = {{ .default.glance.api.image_tag_quota | default "128" }} + +# +# Maximum number of locations allowed on an image. +# +# Any negative value is interpreted as unlimited. +# +# Related options: +# * None +# +# (integer value) +# from .default.glance.api.image_location_quota +{{ if not .default.glance.api.image_location_quota }}#{{ end }}image_location_quota = {{ .default.glance.api.image_location_quota | default "10" }} + +# +# Python module path of data access API. +# +# Specifies the path to the API to use for accessing the data model. +# This option determines how the image catalog data will be accessed. +# +# Possible values: +# * glance.db.sqlalchemy.api +# * glance.db.registry.api +# * glance.db.simple.api +# +# If this option is set to ``glance.db.sqlalchemy.api`` then the image +# catalog data is stored in and read from the database via the +# SQLAlchemy Core and ORM APIs. +# +# Setting this option to ``glance.db.registry.api`` will force all +# database access requests to be routed through the Registry service. +# This avoids data access from the Glance API nodes for an added layer +# of security, scalability and manageability. +# +# NOTE: In v2 OpenStack Images API, the registry service is optional. +# In order to use the Registry API in v2, the option +# ``enable_v2_registry`` must be set to ``True``. +# +# Finally, when this configuration option is set to +# ``glance.db.simple.api``, image catalog data is stored in and read +# from an in-memory data structure. This is primarily used for testing. +# +# Related options: +# * enable_v2_api +# * enable_v2_registry +# +# (string value) +# from .default.glance.api.data_api +{{ if not .default.glance.api.data_api }}#{{ end }}data_api = {{ .default.glance.api.data_api | default "glance.db.sqlalchemy.api" }} + +# +# The default number of results to return for a request. +# +# Responses to certain API requests, like list images, may return +# multiple items. The number of results returned can be explicitly +# controlled by specifying the ``limit`` parameter in the API request. +# However, if a ``limit`` parameter is not specified, this +# configuration value will be used as the default number of results to +# be returned for any API request. +# +# NOTES: +# * The value of this configuration option may not be greater than +# the value specified by ``api_limit_max``. +# * Setting this to a very large value may slow down database +# queries and increase response times. Setting this to a +# very low value may result in poor user experience. +# +# Possible values: +# * Any positive integer +# +# Related options: +# * api_limit_max +# +# (integer value) +# Minimum value: 1 +# from .default.glance.api.limit_param_default +{{ if not .default.glance.api.limit_param_default }}#{{ end }}limit_param_default = {{ .default.glance.api.limit_param_default | default "25" }} + +# +# Maximum number of results that could be returned by a request. +# +# As described in the help text of ``limit_param_default``, some +# requests may return multiple results. The number of results to be +# returned are governed either by the ``limit`` parameter in the +# request or the ``limit_param_default`` configuration option. +# The value in either case, can't be greater than the absolute maximum +# defined by this configuration option. Anything greater than this +# value is trimmed down to the maximum value defined here. +# +# NOTE: Setting this to a very large value may slow down database +# queries and increase response times. Setting this to a +# very low value may result in poor user experience. +# +# Possible values: +# * Any positive integer +# +# Related options: +# * limit_param_default +# +# (integer value) +# Minimum value: 1 +# from .default.glance.api.api_limit_max +{{ if not .default.glance.api.api_limit_max }}#{{ end }}api_limit_max = {{ .default.glance.api.api_limit_max | default "1000" }} + +# +# Show direct image location when returning an image. +# +# This configuration option indicates whether to show the direct image +# location when returning image details to the user. The direct image +# location is where the image data is stored in backend storage. This +# image location is shown under the image property ``direct_url``. +# +# When multiple image locations exist for an image, the best location +# is displayed based on the location strategy indicated by the +# configuration option ``location_strategy``. +# +# NOTES: +# * Revealing image locations can present a GRAVE SECURITY RISK as +# image locations can sometimes include credentials. Hence, this +# is set to ``False`` by default. Set this to ``True`` with +# EXTREME CAUTION and ONLY IF you know what you are doing! +# * If an operator wishes to avoid showing any image location(s) +# to the user, then both this option and +# ``show_multiple_locations`` MUST be set to ``False``. +# +# Possible values: +# * True +# * False +# +# Related options: +# * show_multiple_locations +# * location_strategy +# +# (boolean value) +# from .default.glance.api.show_image_direct_url +{{ if not .default.glance.api.show_image_direct_url }}#{{ end }}show_image_direct_url = {{ .default.glance.api.show_image_direct_url | default "false" }} + +# DEPRECATED: +# Show all image locations when returning an image. +# +# This configuration option indicates whether to show all the image +# locations when returning image details to the user. When multiple +# image locations exist for an image, the locations are ordered based +# on the location strategy indicated by the configuration opt +# ``location_strategy``. The image locations are shown under the +# image property ``locations``. +# +# NOTES: +# * Revealing image locations can present a GRAVE SECURITY RISK as +# image locations can sometimes include credentials. Hence, this +# is set to ``False`` by default. Set this to ``True`` with +# EXTREME CAUTION and ONLY IF you know what you are doing! +# * If an operator wishes to avoid showing any image location(s) +# to the user, then both this option and +# ``show_image_direct_url`` MUST be set to ``False``. +# +# Possible values: +# * True +# * False +# +# Related options: +# * show_image_direct_url +# * location_strategy +# +# (boolean value) +# This option is deprecated for removal since Newton. +# Its value may be silently ignored in the future. +# Reason: This option will be removed in the Ocata release because the same +# functionality can be achieved with greater granularity by using policies. +# Please see the Newton release notes for more information. +# from .default.glance.api.show_multiple_locations +{{ if not .default.glance.api.show_multiple_locations }}#{{ end }}show_multiple_locations = {{ .default.glance.api.show_multiple_locations | default "false" }} + +# +# Maximum size of image a user can upload in bytes. +# +# An image upload greater than the size mentioned here would result +# in an image creation failure. This configuration option defaults to +# 1099511627776 bytes (1 TiB). +# +# NOTES: +# * This value should only be increased after careful +# consideration and must be set less than or equal to +# 8 EiB (9223372036854775808). +# * This value must be set with careful consideration of the +# backend storage capacity. Setting this to a very low value +# may result in a large number of image failures. And, setting +# this to a very large value may result in faster consumption +# of storage. Hence, this must be set according to the nature of +# images created and storage capacity available. +# +# Possible values: +# * Any positive number less than or equal to 9223372036854775808 +# +# (integer value) +# Minimum value: 1 +# Maximum value: 9223372036854775808 +# from .default.glance.api.image_size_cap +{{ if not .default.glance.api.image_size_cap }}#{{ end }}image_size_cap = {{ .default.glance.api.image_size_cap | default "1099511627776" }} + +# +# Maximum amount of image storage per tenant. +# +# This enforces an upper limit on the cumulative storage consumed by all images +# of a tenant across all stores. This is a per-tenant limit. +# +# The default unit for this configuration option is Bytes. However, storage +# units can be specified using case-sensitive literals ``B``, ``KB``, ``MB``, +# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes, GigaBytes and +# TeraBytes respectively. Note that there should not be any space between the +# value and unit. Value ``0`` signifies no quota enforcement. Negative values +# are invalid and result in errors. +# +# Possible values: +# * A string that is a valid concatenation of a non-negative integer +# representing the storage value and an optional string literal +# representing storage units as mentioned above. +# +# Related options: +# * None +# +# (string value) +# from .default.glance.api.user_storage_quota +{{ if not .default.glance.api.user_storage_quota }}#{{ end }}user_storage_quota = {{ .default.glance.api.user_storage_quota | default "0" }} + +# +# Deploy the v1 OpenStack Images API. +# +# When this option is set to ``True``, Glance service will respond to +# requests on registered endpoints conforming to the v1 OpenStack +# Images API. +# +# NOTES: +# * If this option is enabled, then ``enable_v1_registry`` must +# also be set to ``True`` to enable mandatory usage of Registry +# service with v1 API. +# +# * If this option is disabled, then the ``enable_v1_registry`` +# option, which is enabled by default, is also recommended +# to be disabled. +# +# * This option is separate from ``enable_v2_api``, both v1 and v2 +# OpenStack Images API can be deployed independent of each +# other. +# +# * If deploying only the v2 Images API, this option, which is +# enabled by default, should be disabled. +# +# Possible values: +# * True +# * False +# +# Related options: +# * enable_v1_registry +# * enable_v2_api +# +# (boolean value) +# from .default.glance.api.enable_v1_api +{{ if not .default.glance.api.enable_v1_api }}#{{ end }}enable_v1_api = {{ .default.glance.api.enable_v1_api | default "true" }} + +# +# Deploy the v2 OpenStack Images API. +# +# When this option is set to ``True``, Glance service will respond +# to requests on registered endpoints conforming to the v2 OpenStack +# Images API. +# +# NOTES: +# * If this option is disabled, then the ``enable_v2_registry`` +# option, which is enabled by default, is also recommended +# to be disabled. +# +# * This option is separate from ``enable_v1_api``, both v1 and v2 +# OpenStack Images API can be deployed independent of each +# other. +# +# * If deploying only the v1 Images API, this option, which is +# enabled by default, should be disabled. +# +# Possible values: +# * True +# * False +# +# Related options: +# * enable_v2_registry +# * enable_v1_api +# +# (boolean value) +# from .default.glance.api.enable_v2_api +{{ if not .default.glance.api.enable_v2_api }}#{{ end }}enable_v2_api = {{ .default.glance.api.enable_v2_api | default "true" }} + +# +# Deploy the v1 API Registry service. +# +# When this option is set to ``True``, the Registry service +# will be enabled in Glance for v1 API requests. +# +# NOTES: +# * Use of Registry is mandatory in v1 API, so this option must +# be set to ``True`` if the ``enable_v1_api`` option is enabled. +# +# * If deploying only the v2 OpenStack Images API, this option, +# which is enabled by default, should be disabled. +# +# Possible values: +# * True +# * False +# +# Related options: +# * enable_v1_api +# +# (boolean value) +# from .default.glance.api.enable_v1_registry +{{ if not .default.glance.api.enable_v1_registry }}#{{ end }}enable_v1_registry = {{ .default.glance.api.enable_v1_registry | default "true" }} + +# +# Deploy the v2 API Registry service. +# +# When this option is set to ``True``, the Registry service +# will be enabled in Glance for v2 API requests. +# +# NOTES: +# * Use of Registry is optional in v2 API, so this option +# must only be enabled if both ``enable_v2_api`` is set to +# ``True`` and the ``data_api`` option is set to +# ``glance.db.registry.api``. +# +# * If deploying only the v1 OpenStack Images API, this option, +# which is enabled by default, should be disabled. +# +# Possible values: +# * True +# * False +# +# Related options: +# * enable_v2_api +# * data_api +# +# (boolean value) +# from .default.glance.api.enable_v2_registry +{{ if not .default.glance.api.enable_v2_registry }}#{{ end }}enable_v2_registry = {{ .default.glance.api.enable_v2_registry | default "true" }} + +# +# Host address of the pydev server. +# +# Provide a string value representing the hostname or IP of the +# pydev server to use for debugging. The pydev server listens for +# debug connections on this address, facilitating remote debugging +# in Glance. +# +# Possible values: +# * Valid hostname +# * Valid IP address +# +# Related options: +# * None +# +# (string value) +# from .default.glance.api.pydev_worker_debug_host +{{ if not .default.glance.api.pydev_worker_debug_host }}#{{ end }}pydev_worker_debug_host = {{ .default.glance.api.pydev_worker_debug_host | default "localhost" }} + +# +# Port number that the pydev server will listen on. +# +# Provide a port number to bind the pydev server to. The pydev +# process accepts debug connections on this port and facilitates +# remote debugging in Glance. +# +# Possible values: +# * A valid port number +# +# Related options: +# * None +# +# (port value) +# Minimum value: 0 +# Maximum value: 65535 +# from .default.glance.api.pydev_worker_debug_port +{{ if not .default.glance.api.pydev_worker_debug_port }}#{{ end }}pydev_worker_debug_port = {{ .default.glance.api.pydev_worker_debug_port | default "5678" }} + +# +# AES key for encrypting store location metadata. +# +# Provide a string value representing the AES cipher to use for +# encrypting Glance store metadata. +# +# NOTE: The AES key to use must be set to a random string of length +# 16, 24 or 32 bytes. +# +# Possible values: +# * String value representing a valid AES key +# +# Related options: +# * None +# +# (string value) +# from .default.glance.api.metadata_encryption_key +{{ if not .default.glance.api.metadata_encryption_key }}#{{ end }}metadata_encryption_key = {{ .default.glance.api.metadata_encryption_key | default "" }} + +# +# Digest algorithm to use for digital signature. +# +# Provide a string value representing the digest algorithm to +# use for generating digital signatures. By default, ``sha256`` +# is used. +# +# To get a list of the available algorithms supported by the version +# of OpenSSL on your platform, run the command: +# ``openssl list-message-digest-algorithms``. +# Examples are 'sha1', 'sha256', and 'sha512'. +# +# NOTE: ``digest_algorithm`` is not related to Glance's image signing +# and verification. It is only used to sign the universally unique +# identifier (UUID) as a part of the certificate file and key file +# validation. +# +# Possible values: +# * An OpenSSL message digest algorithm identifier +# +# Relation options: +# * None +# +# (string value) +# from .default.glance.api.digest_algorithm +{{ if not .default.glance.api.digest_algorithm }}#{{ end }}digest_algorithm = {{ .default.glance.api.digest_algorithm | default "sha256" }} + +# +# Strategy to determine the preference order of image locations. +# +# This configuration option indicates the strategy to determine +# the order in which an image's locations must be accessed to +# serve the image's data. Glance then retrieves the image data +# from the first responsive active location it finds in this list. +# +# This option takes one of two possible values ``location_order`` +# and ``store_type``. The default value is ``location_order``, +# which suggests that image data be served by using locations in +# the order they are stored in Glance. The ``store_type`` value +# sets the image location preference based on the order in which +# the storage backends are listed as a comma separated list for +# the configuration option ``store_type_preference``. +# +# Possible values: +# * location_order +# * store_type +# +# Related options: +# * store_type_preference +# +# (string value) +# Allowed values: location_order, store_type +# from .default.glance.api.location_strategy +{{ if not .default.glance.api.location_strategy }}#{{ end }}location_strategy = {{ .default.glance.api.location_strategy | default "location_order" }} + +# +# The location of the property protection file. +# +# Provide a valid path to the property protection file which contains +# the rules for property protections and the roles/policies associated +# with them. +# +# A property protection file, when set, restricts the Glance image +# properties to be created, read, updated and/or deleted by a specific +# set of users that are identified by either roles or policies. +# If this configuration option is not set, by default, property +# protections won't be enforced. If a value is specified and the file +# is not found, the glance-api service will fail to start. +# More information on property protections can be found at: +# http://docs.openstack.org/developer/glance/property-protections.html +# +# Possible values: +# * Empty string +# * Valid path to the property protection configuration file +# +# Related options: +# * property_protection_rule_format +# +# (string value) +# from .default.glance.api.property_protection_file +{{ if not .default.glance.api.property_protection_file }}#{{ end }}property_protection_file = {{ .default.glance.api.property_protection_file | default "" }} + +# +# Rule format for property protection. +# +# Provide the desired way to set property protection on Glance +# image properties. The two permissible values are ``roles`` +# and ``policies``. The default value is ``roles``. +# +# If the value is ``roles``, the property protection file must +# contain a comma separated list of user roles indicating +# permissions for each of the CRUD operations on each property +# being protected. If set to ``policies``, a policy defined in +# policy.json is used to express property protections for each +# of the CRUD operations. Examples of how property protections +# are enforced based on ``roles`` or ``policies`` can be found at: +# http://docs.openstack.org/developer/glance/property-protections.html#examples +# +# Possible values: +# * roles +# * policies +# +# Related options: +# * property_protection_file +# +# (string value) +# Allowed values: roles, policies +# from .default.glance.api.property_protection_rule_format +{{ if not .default.glance.api.property_protection_rule_format }}#{{ end }}property_protection_rule_format = {{ .default.glance.api.property_protection_rule_format | default "roles" }} + +# +# List of allowed exception modules to handle RPC exceptions. +# +# Provide a comma separated list of modules whose exceptions are +# permitted to be recreated upon receiving exception data via an RPC +# call made to Glance. The default list includes +# ``glance.common.exception``, ``builtins``, and ``exceptions``. +# +# The RPC protocol permits interaction with Glance via calls across a +# network or within the same system. Including a list of exception +# namespaces with this option enables RPC to propagate the exceptions +# back to the users. +# +# Possible values: +# * A comma separated list of valid exception modules +# +# Related options: +# * None +# (list value) +# from .default.glance.api.allowed_rpc_exception_modules +{{ if not .default.glance.api.allowed_rpc_exception_modules }}#{{ end }}allowed_rpc_exception_modules = {{ .default.glance.api.allowed_rpc_exception_modules | default "glance.common.exception,builtins,exceptions" }} + +# +# IP address to bind the glance servers to. +# +# Provide an IP address to bind the glance server to. The default +# value is ``0.0.0.0``. +# +# Edit this option to enable the server to listen on one particular +# IP address on the network card. This facilitates selection of a +# particular network interface for the server. +# +# Possible values: +# * A valid IPv4 address +# * A valid IPv6 address +# +# Related options: +# * None +# +# (string value) +# from .default.glance.api.bind_host +{{ if not .default.glance.api.bind_host }}#{{ end }}bind_host = {{ .default.glance.api.bind_host | default "0.0.0.0" }} + +# +# Port number on which the server will listen. +# +# Provide a valid port number to bind the server's socket to. This +# port is then set to identify processes and forward network messages +# that arrive at the server. The default bind_port value for the API +# server is 9292 and for the registry server is 9191. +# +# Possible values: +# * A valid port number (0 to 65535) +# +# Related options: +# * None +# +# (port value) +# Minimum value: 0 +# Maximum value: 65535 +# from .default.glance.api.bind_port +{{ if not .default.glance.api.bind_port }}#{{ end }}bind_port = {{ .default.glance.api.bind_port | default "" }} + +# +# Number of Glance worker processes to start. +# +# Provide a non-negative integer value to set the number of child +# process workers to service requests. By default, the number of CPUs +# available is set as the value for ``workers``. +# +# Each worker process is made to listen on the port set in the +# configuration file and contains a greenthread pool of size 1000. +# +# NOTE: Setting the number of workers to zero, triggers the creation +# of a single API process with a greenthread pool of size 1000. +# +# Possible values: +# * 0 +# * Positive integer value (typically equal to the number of CPUs) +# +# Related options: +# * None +# +# (integer value) +# Minimum value: 0 +# from .default.glance.api.workers +{{ if not .default.glance.api.workers }}#{{ end }}workers = {{ .default.glance.api.workers | default "" }} + +# +# Maximum line size of message headers. +# +# Provide an integer value representing a length to limit the size of +# message headers. The default value is 16384. +# +# NOTE: ``max_header_line`` may need to be increased when using large +# tokens (typically those generated by the Keystone v3 API with big +# service catalogs). However, it is to be kept in mind that larger +# values for ``max_header_line`` would flood the logs. +# +# Setting ``max_header_line`` to 0 sets no limit for the line size of +# message headers. +# +# Possible values: +# * 0 +# * Positive integer +# +# Related options: +# * None +# +# (integer value) +# Minimum value: 0 +# from .default.glance.api.max_header_line +{{ if not .default.glance.api.max_header_line }}#{{ end }}max_header_line = {{ .default.glance.api.max_header_line | default "16384" }} + +# +# Set keep alive option for HTTP over TCP. +# +# Provide a boolean value to determine sending of keep alive packets. +# If set to ``False``, the server returns the header +# "Connection: close". If set to ``True``, the server returns a +# "Connection: Keep-Alive" in its responses. This enables retention of +# the same TCP connection for HTTP conversations instead of opening a +# new one with each new request. +# +# This option must be set to ``False`` if the client socket connection +# needs to be closed explicitly after the response is received and +# read successfully by the client. +# +# Possible values: +# * True +# * False +# +# Related options: +# * None +# +# (boolean value) +# from .default.glance.api.http_keepalive +{{ if not .default.glance.api.http_keepalive }}#{{ end }}http_keepalive = {{ .default.glance.api.http_keepalive | default "true" }} + +# +# Timeout for client connections' socket operations. +# +# Provide a valid integer value representing time in seconds to set +# the period of wait before an incoming connection can be closed. The +# default value is 900 seconds. +# +# The value zero implies wait forever. +# +# Possible values: +# * Zero +# * Positive integer +# +# Related options: +# * None +# +# (integer value) +# Minimum value: 0 +# from .default.glance.api.client_socket_timeout +{{ if not .default.glance.api.client_socket_timeout }}#{{ end }}client_socket_timeout = {{ .default.glance.api.client_socket_timeout | default "900" }} + +# +# Set the number of incoming connection requests. +# +# Provide a positive integer value to limit the number of requests in +# the backlog queue. The default queue size is 4096. +# +# An incoming connection to a TCP listener socket is queued before a +# connection can be established with the server. Setting the backlog +# for a TCP socket ensures a limited queue size for incoming traffic. +# +# Possible values: +# * Positive integer +# +# Related options: +# * None +# +# (integer value) +# Minimum value: 1 +# from .default.glance.api.backlog +{{ if not .default.glance.api.backlog }}#{{ end }}backlog = {{ .default.glance.api.backlog | default "4096" }} + +# +# Set the wait time before a connection recheck. +# +# Provide a positive integer value representing time in seconds which +# is set as the idle wait time before a TCP keep alive packet can be +# sent to the host. The default value is 600 seconds. +# +# Setting ``tcp_keepidle`` helps verify at regular intervals that a +# connection is intact and prevents frequent TCP connection +# reestablishment. +# +# Possible values: +# * Positive integer value representing time in seconds +# +# Related options: +# * None +# +# (integer value) +# Minimum value: 1 +# from .default.glance.api.tcp_keepidle +{{ if not .default.glance.api.tcp_keepidle }}#{{ end }}tcp_keepidle = {{ .default.glance.api.tcp_keepidle | default "600" }} + +# +# Absolute path to the CA file. +# +# Provide a string value representing a valid absolute path to +# the Certificate Authority file to use for client authentication. +# +# A CA file typically contains necessary trusted certificates to +# use for the client authentication. This is essential to ensure +# that a secure connection is established to the server via the +# internet. +# +# Possible values: +# * Valid absolute path to the CA file +# +# Related options: +# * None +# +# (string value) +# from .default.glance.api.ca_file +{{ if not .default.glance.api.ca_file }}#{{ end }}ca_file = {{ .default.glance.api.ca_file | default "/etc/ssl/cafile" }} + +# +# Absolute path to the certificate file. +# +# Provide a string value representing a valid absolute path to the +# certificate file which is required to start the API service +# securely. +# +# A certificate file typically is a public key container and includes +# the server's public key, server name, server information and the +# signature which was a result of the verification process using the +# CA certificate. This is required for a secure connection +# establishment. +# +# Possible values: +# * Valid absolute path to the certificate file +# +# Related options: +# * None +# +# (string value) +# from .default.glance.api.cert_file +{{ if not .default.glance.api.cert_file }}#{{ end }}cert_file = {{ .default.glance.api.cert_file | default "/etc/ssl/certs" }} + +# +# Absolute path to a private key file. +# +# Provide a string value representing a valid absolute path to a +# private key file which is required to establish the client-server +# connection. +# +# Possible values: +# * Absolute path to the private key file +# +# Related options: +# * None +# +# (string value) +# from .default.glance.api.key_file +{{ if not .default.glance.api.key_file }}#{{ end }}key_file = {{ .default.glance.api.key_file | default "/etc/ssl/key/key-file.pem" }} + +# DEPRECATED: The HTTP header used to determine the scheme for the original +# request, even if it was removed by an SSL terminating proxy. Typical value is +# "HTTP_X_FORWARDED_PROTO". (string value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Use the http_proxy_to_wsgi middleware instead. +# from .default.glance.api.secure_proxy_ssl_header +{{ if not .default.glance.api.secure_proxy_ssl_header }}#{{ end }}secure_proxy_ssl_header = {{ .default.glance.api.secure_proxy_ssl_header | default "" }} + +# +# The relative path to sqlite file database that will be used for image cache +# management. +# +# This is a relative path to the sqlite file database that tracks the age and +# usage statistics of image cache. The path is relative to image cache base +# directory, specified by the configuration option ``image_cache_dir``. +# +# This is a lightweight database with just one table. +# +# Possible values: +# * A valid relative path to sqlite file database +# +# Related options: +# * ``image_cache_dir`` +# +# (string value) +# from .default.glance.api.image_cache_sqlite_db +{{ if not .default.glance.api.image_cache_sqlite_db }}#{{ end }}image_cache_sqlite_db = {{ .default.glance.api.image_cache_sqlite_db | default "cache.db" }} + +# +# The driver to use for image cache management. +# +# This configuration option provides the flexibility to choose between the +# different image-cache drivers available. An image-cache driver is responsible +# for providing the essential functions of image-cache like write images to/read +# images from cache, track age and usage of cached images, provide a list of +# cached images, fetch size of the cache, queue images for caching and clean up +# the cache, etc. +# +# The essential functions of a driver are defined in the base class +# ``glance.image_cache.drivers.base.Driver``. All image-cache drivers (existing +# and prospective) must implement this interface. Currently available drivers +# are ``sqlite`` and ``xattr``. These drivers primarily differ in the way they +# store the information about cached images: +# * The ``sqlite`` driver uses a sqlite database (which sits on every glance +# node locally) to track the usage of cached images. +# * The ``xattr`` driver uses the extended attributes of files to store this +# information. It also requires a filesystem that sets ``atime`` on the +# files +# when accessed. +# +# Possible values: +# * sqlite +# * xattr +# +# Related options: +# * None +# +# (string value) +# Allowed values: sqlite, xattr +# from .default.glance.api.image_cache_driver +{{ if not .default.glance.api.image_cache_driver }}#{{ end }}image_cache_driver = {{ .default.glance.api.image_cache_driver | default "sqlite" }} + +# +# The upper limit on cache size, in bytes, after which the cache-pruner cleans +# up the image cache. +# +# NOTE: This is just a threshold for cache-pruner to act upon. It is NOT a +# hard limit beyond which the image cache would never grow. In fact, depending +# on how often the cache-pruner runs and how quickly the cache fills, the image +# cache can far exceed the size specified here very easily. Hence, care must be +# taken to appropriately schedule the cache-pruner and in setting this limit. +# +# Glance caches an image when it is downloaded. Consequently, the size of the +# image cache grows over time as the number of downloads increases. To keep the +# cache size from becoming unmanageable, it is recommended to run the +# cache-pruner as a periodic task. When the cache pruner is kicked off, it +# compares the current size of image cache and triggers a cleanup if the image +# cache grew beyond the size specified here. After the cleanup, the size of +# cache is less than or equal to size specified here. +# +# Possible values: +# * Any non-negative integer +# +# Related options: +# * None +# +# (integer value) +# Minimum value: 0 +# from .default.glance.api.image_cache_max_size +{{ if not .default.glance.api.image_cache_max_size }}#{{ end }}image_cache_max_size = {{ .default.glance.api.image_cache_max_size | default "10737418240" }} + +# +# The amount of time, in seconds, an incomplete image remains in the cache. +# +# Incomplete images are images for which download is in progress. Please see the +# description of configuration option ``image_cache_dir`` for more detail. +# Sometimes, due to various reasons, it is possible the download may hang and +# the incompletely downloaded image remains in the ``incomplete`` directory. +# This configuration option sets a time limit on how long the incomplete images +# should remain in the ``incomplete`` directory before they are cleaned up. +# Once an incomplete image spends more time than is specified here, it'll be +# removed by cache-cleaner on its next run. +# +# It is recommended to run cache-cleaner as a periodic task on the Glance API +# nodes to keep the incomplete images from occupying disk space. +# +# Possible values: +# * Any non-negative integer +# +# Related options: +# * None +# +# (integer value) +# Minimum value: 0 +# from .default.glance.api.image_cache_stall_time +{{ if not .default.glance.api.image_cache_stall_time }}#{{ end }}image_cache_stall_time = {{ .default.glance.api.image_cache_stall_time | default "86400" }} + +# +# Base directory for image cache. +# +# This is the location where image data is cached and served out of. All cached +# images are stored directly under this directory. This directory also contains +# three subdirectories, namely, ``incomplete``, ``invalid`` and ``queue``. +# +# The ``incomplete`` subdirectory is the staging area for downloading images. An +# image is first downloaded to this directory. When the image download is +# successful it is moved to the base directory. However, if the download fails, +# the partially downloaded image file is moved to the ``invalid`` subdirectory. +# +# The ``queue``subdirectory is used for queuing images for download. This is +# used primarily by the cache-prefetcher, which can be scheduled as a periodic +# task like cache-pruner and cache-cleaner, to cache images ahead of their +# usage. +# Upon receiving the request to cache an image, Glance touches a file in the +# ``queue`` directory with the image id as the file name. The cache-prefetcher, +# when running, polls for the files in ``queue`` directory and starts +# downloading them in the order they were created. When the download is +# successful, the zero-sized file is deleted from the ``queue`` directory. +# If the download fails, the zero-sized file remains and it'll be retried the +# next time cache-prefetcher runs. +# +# Possible values: +# * A valid path +# +# Related options: +# * ``image_cache_sqlite_db`` +# +# (string value) +# from .default.glance.api.image_cache_dir +{{ if not .default.glance.api.image_cache_dir }}#{{ end }}image_cache_dir = {{ .default.glance.api.image_cache_dir | default "" }} + +# +# Default publisher_id for outgoing Glance notifications. +# +# This is the value that the notification driver will use to identify +# messages for events originating from the Glance service. Typically, +# this is the hostname of the instance that generated the message. +# +# Possible values: +# * Any reasonable instance identifier, for example: image.host1 +# +# Related options: +# * None +# +# (string value) +# from .default.glance.api.default_publisher_id +{{ if not .default.glance.api.default_publisher_id }}#{{ end }}default_publisher_id = {{ .default.glance.api.default_publisher_id | default "image.localhost" }} + +# +# List of notifications to be disabled. +# +# Specify a list of notifications that should not be emitted. +# A notification can be given either as a notification type to +# disable a single event notification, or as a notification group +# prefix to disable all event notifications within a group. +# +# Possible values: +# A comma-separated list of individual notification types or +# notification groups to be disabled. Currently supported groups: +# * image +# * image.member +# * task +# * metadef_namespace +# * metadef_object +# * metadef_property +# * metadef_resource_type +# * metadef_tag +# For a complete listing and description of each event refer to: +# http://docs.openstack.org/developer/glance/notifications.html +# +# The values must be specified as: . +# For example: image.create,task.success,metadef_tag +# +# Related options: +# * None +# +# (list value) +# from .default.glance.api.disabled_notifications +{{ if not .default.glance.api.disabled_notifications }}#{{ end }}disabled_notifications = {{ .default.glance.api.disabled_notifications | default "" }} + +# +# Address the registry server is hosted on. +# +# Possible values: +# * A valid IP or hostname +# +# Related options: +# * None +# +# (string value) +# from .default.glance.api.registry_host +{{ if not .default.glance.api.registry_host }}#{{ end }}registry_host = {{ .default.glance.api.registry_host | default "0.0.0.0" }} + +# +# Port the registry server is listening on. +# +# Possible values: +# * A valid port number +# +# Related options: +# * None +# +# (port value) +# Minimum value: 0 +# Maximum value: 65535 +# from .default.glance.api.registry_port +{{ if not .default.glance.api.registry_port }}#{{ end }}registry_port = {{ .default.glance.api.registry_port | default "9191" }} + +# DEPRECATED: Whether to pass through the user token when making requests to the +# registry. To prevent failures with token expiration during big files upload, +# it is recommended to set this parameter to False.If "use_user_token" is not in +# effect, then admin credentials can be specified. (boolean value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: This option was considered harmful and has been deprecated in M +# release. It will be removed in O release. For more information read OSSN-0060. +# Related functionality with uploading big images has been implemented with +# Keystone trusts support. +# from .default.glance.api.use_user_token +{{ if not .default.glance.api.use_user_token }}#{{ end }}use_user_token = {{ .default.glance.api.use_user_token | default "true" }} + +# DEPRECATED: The administrators user name. If "use_user_token" is not in +# effect, then admin credentials can be specified. (string value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: This option was considered harmful and has been deprecated in M +# release. It will be removed in O release. For more information read OSSN-0060. +# Related functionality with uploading big images has been implemented with +# Keystone trusts support. +# from .default.glance.api.admin_user +{{ if not .default.glance.api.admin_user }}#{{ end }}admin_user = {{ .default.glance.api.admin_user | default "" }} + +# DEPRECATED: The administrators password. If "use_user_token" is not in effect, +# then admin credentials can be specified. (string value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: This option was considered harmful and has been deprecated in M +# release. It will be removed in O release. For more information read OSSN-0060. +# Related functionality with uploading big images has been implemented with +# Keystone trusts support. +# from .default.glance.api.admin_password +{{ if not .default.glance.api.admin_password }}#{{ end }}admin_password = {{ .default.glance.api.admin_password | default "" }} + +# DEPRECATED: The tenant name of the administrative user. If "use_user_token" is +# not in effect, then admin tenant name can be specified. (string value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: This option was considered harmful and has been deprecated in M +# release. It will be removed in O release. For more information read OSSN-0060. +# Related functionality with uploading big images has been implemented with +# Keystone trusts support. +# from .default.glance.api.admin_tenant_name +{{ if not .default.glance.api.admin_tenant_name }}#{{ end }}admin_tenant_name = {{ .default.glance.api.admin_tenant_name | default "" }} + +# DEPRECATED: The URL to the keystone service. If "use_user_token" is not in +# effect and using keystone auth, then URL of keystone can be specified. (string +# value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: This option was considered harmful and has been deprecated in M +# release. It will be removed in O release. For more information read OSSN-0060. +# Related functionality with uploading big images has been implemented with +# Keystone trusts support. +# from .default.glance.api.auth_url +{{ if not .default.glance.api.auth_url }}#{{ end }}auth_url = {{ .default.glance.api.auth_url | default "" }} + +# DEPRECATED: The strategy to use for authentication. If "use_user_token" is not +# in effect, then auth strategy can be specified. (string value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: This option was considered harmful and has been deprecated in M +# release. It will be removed in O release. For more information read OSSN-0060. +# Related functionality with uploading big images has been implemented with +# Keystone trusts support. +# from .default.glance.api.auth_strategy +{{ if not .default.glance.api.auth_strategy }}#{{ end }}auth_strategy = {{ .default.glance.api.auth_strategy | default "noauth" }} + +# DEPRECATED: The region for the authentication service. If "use_user_token" is +# not in effect and using keystone auth, then region name can be specified. +# (string value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: This option was considered harmful and has been deprecated in M +# release. It will be removed in O release. For more information read OSSN-0060. +# Related functionality with uploading big images has been implemented with +# Keystone trusts support. +# from .default.glance.api.auth_region +{{ if not .default.glance.api.auth_region }}#{{ end }}auth_region = {{ .default.glance.api.auth_region | default "" }} + +# +# Protocol to use for communication with the registry server. +# +# Provide a string value representing the protocol to use for +# communication with the registry server. By default, this option is +# set to ``http`` and the connection is not secure. +# +# This option can be set to ``https`` to establish a secure connection +# to the registry server. In this case, provide a key to use for the +# SSL connection using the ``registry_client_key_file`` option. Also +# include the CA file and cert file using the options +# ``registry_client_ca_file`` and ``registry_client_cert_file`` +# respectively. +# +# Possible values: +# * http +# * https +# +# Related options: +# * registry_client_key_file +# * registry_client_cert_file +# * registry_client_ca_file +# +# (string value) +# Allowed values: http, https +# from .default.glance.api.registry_client_protocol +{{ if not .default.glance.api.registry_client_protocol }}#{{ end }}registry_client_protocol = {{ .default.glance.api.registry_client_protocol | default "http" }} + +# +# Absolute path to the private key file. +# +# Provide a string value representing a valid absolute path to the +# private key file to use for establishing a secure connection to +# the registry server. +# +# NOTE: This option must be set if ``registry_client_protocol`` is +# set to ``https``. Alternatively, the GLANCE_CLIENT_KEY_FILE +# environment variable may be set to a filepath of the key file. +# +# Possible values: +# * String value representing a valid absolute path to the key +# file. +# +# Related options: +# * registry_client_protocol +# +# (string value) +# from .default.glance.api.registry_client_key_file +{{ if not .default.glance.api.registry_client_key_file }}#{{ end }}registry_client_key_file = {{ .default.glance.api.registry_client_key_file | default "/etc/ssl/key/key-file.pem" }} + +# +# Absolute path to the certificate file. +# +# Provide a string value representing a valid absolute path to the +# certificate file to use for establishing a secure connection to +# the registry server. +# +# NOTE: This option must be set if ``registry_client_protocol`` is +# set to ``https``. Alternatively, the GLANCE_CLIENT_CERT_FILE +# environment variable may be set to a filepath of the certificate +# file. +# +# Possible values: +# * String value representing a valid absolute path to the +# certificate file. +# +# Related options: +# * registry_client_protocol +# +# (string value) +# from .default.glance.api.registry_client_cert_file +{{ if not .default.glance.api.registry_client_cert_file }}#{{ end }}registry_client_cert_file = {{ .default.glance.api.registry_client_cert_file | default "/etc/ssl/certs/file.crt" }} + +# +# Absolute path to the Certificate Authority file. +# +# Provide a string value representing a valid absolute path to the +# certificate authority file to use for establishing a secure +# connection to the registry server. +# +# NOTE: This option must be set if ``registry_client_protocol`` is +# set to ``https``. Alternatively, the GLANCE_CLIENT_CA_FILE +# environment variable may be set to a filepath of the CA file. +# This option is ignored if the ``registry_client_insecure`` option +# is set to ``True``. +# +# Possible values: +# * String value representing a valid absolute path to the CA +# file. +# +# Related options: +# * registry_client_protocol +# * registry_client_insecure +# +# (string value) +# from .default.glance.api.registry_client_ca_file +{{ if not .default.glance.api.registry_client_ca_file }}#{{ end }}registry_client_ca_file = {{ .default.glance.api.registry_client_ca_file | default "/etc/ssl/cafile/file.ca" }} + +# +# Set verification of the registry server certificate. +# +# Provide a boolean value to determine whether or not to validate +# SSL connections to the registry server. By default, this option +# is set to ``False`` and the SSL connections are validated. +# +# If set to ``True``, the connection to the registry server is not +# validated via a certifying authority and the +# ``registry_client_ca_file`` option is ignored. This is the +# registry's equivalent of specifying --insecure on the command line +# using glanceclient for the API. +# +# Possible values: +# * True +# * False +# +# Related options: +# * registry_client_protocol +# * registry_client_ca_file +# +# (boolean value) +# from .default.glance.api.registry_client_insecure +{{ if not .default.glance.api.registry_client_insecure }}#{{ end }}registry_client_insecure = {{ .default.glance.api.registry_client_insecure | default "false" }} + +# +# Timeout value for registry requests. +# +# Provide an integer value representing the period of time in seconds +# that the API server will wait for a registry request to complete. +# The default value is 600 seconds. +# +# A value of 0 implies that a request will never timeout. +# +# Possible values: +# * Zero +# * Positive integer +# +# Related options: +# * None +# +# (integer value) +# Minimum value: 0 +# from .default.glance.api.registry_client_timeout +{{ if not .default.glance.api.registry_client_timeout }}#{{ end }}registry_client_timeout = {{ .default.glance.api.registry_client_timeout | default "600" }} + +# +# Send headers received from identity when making requests to +# registry. +# +# Typically, Glance registry can be deployed in multiple flavors, +# which may or may not include authentication. For example, +# ``trusted-auth`` is a flavor that does not require the registry +# service to authenticate the requests it receives. However, the +# registry service may still need a user context to be populated to +# serve the requests. This can be achieved by the caller +# (the Glance API usually) passing through the headers it received +# from authenticating with identity for the same request. The typical +# headers sent are ``X-User-Id``, ``X-Tenant-Id``, ``X-Roles``, +# ``X-Identity-Status`` and ``X-Service-Catalog``. +# +# Provide a boolean value to determine whether to send the identity +# headers to provide tenant and user information along with the +# requests to registry service. By default, this option is set to +# ``False``, which means that user and tenant information is not +# available readily. It must be obtained by authenticating. Hence, if +# this is set to ``False``, ``flavor`` must be set to value that +# either includes authentication or authenticated user context. +# +# Possible values: +# * True +# * False +# +# Related options: +# * flavor +# +# (boolean value) +# from .default.glance.api.send_identity_headers +{{ if not .default.glance.api.send_identity_headers }}#{{ end }}send_identity_headers = {{ .default.glance.api.send_identity_headers | default "false" }} + +# +# The amount of time, in seconds, to delay image scrubbing. +# +# When delayed delete is turned on, an image is put into ``pending_delete`` +# state upon deletion until the scrubber deletes its image data. Typically, soon +# after the image is put into ``pending_delete`` state, it is available for +# scrubbing. However, scrubbing can be delayed until a later point using this +# configuration option. This option denotes the time period an image spends in +# ``pending_delete`` state before it is available for scrubbing. +# +# It is important to realize that this has storage implications. The larger the +# ``scrub_time``, the longer the time to reclaim backend storage from deleted +# images. +# +# Possible values: +# * Any non-negative integer +# +# Related options: +# * ``delayed_delete`` +# +# (integer value) +# Minimum value: 0 +# from .default.glance.api.scrub_time +{{ if not .default.glance.api.scrub_time }}#{{ end }}scrub_time = {{ .default.glance.api.scrub_time | default "0" }} + +# +# The size of thread pool to be used for scrubbing images. +# +# When there are a large number of images to scrub, it is beneficial to scrub +# images in parallel so that the scrub queue stays in control and the backend +# storage is reclaimed in a timely fashion. This configuration option denotes +# the maximum number of images to be scrubbed in parallel. The default value is +# one, which signifies serial scrubbing. Any value above one indicates parallel +# scrubbing. +# +# Possible values: +# * Any non-zero positive integer +# +# Related options: +# * ``delayed_delete`` +# +# (integer value) +# Minimum value: 1 +# from .default.glance.api.scrub_pool_size +{{ if not .default.glance.api.scrub_pool_size }}#{{ end }}scrub_pool_size = {{ .default.glance.api.scrub_pool_size | default "1" }} + +# +# Turn on/off delayed delete. +# +# Typically when an image is deleted, the ``glance-api`` service puts the image +# into ``deleted`` state and deletes its data at the same time. Delayed delete +# is a feature in Glance that delays the actual deletion of image data until a +# later point in time (as determined by the configuration option +# ``scrub_time``). +# When delayed delete is turned on, the ``glance-api`` service puts the image +# into ``pending_delete`` state upon deletion and leaves the image data in the +# storage backend for the image scrubber to delete at a later time. The image +# scrubber will move the image into ``deleted`` state upon successful deletion +# of image data. +# +# NOTE: When delayed delete is turned on, image scrubber MUST be running as a +# periodic task to prevent the backend storage from filling up with undesired +# usage. +# +# Possible values: +# * True +# * False +# +# Related options: +# * ``scrub_time`` +# * ``wakeup_time`` +# * ``scrub_pool_size`` +# +# (boolean value) +# from .default.glance.api.delayed_delete +{{ if not .default.glance.api.delayed_delete }}#{{ end }}delayed_delete = {{ .default.glance.api.delayed_delete | default "false" }} + +# +# From oslo.log +# + +# If set to true, the logging level will be set to DEBUG instead of the default +# INFO level. (boolean value) +# Note: This option can be changed without restarting. +# from .default.oslo.log.debug +{{ if not .default.oslo.log.debug }}#{{ end }}debug = {{ .default.oslo.log.debug | default "false" }} + +# DEPRECATED: If set to false, the logging level will be set to WARNING instead +# of the default INFO level. (boolean value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# from .default.oslo.log.verbose +{{ if not .default.oslo.log.verbose }}#{{ end }}verbose = {{ .default.oslo.log.verbose | default "true" }} + +# The name of a logging configuration file. This file is appended to any +# existing logging configuration files. For details about logging configuration +# files, see the Python logging module documentation. Note that when logging +# configuration files are used then all logging configuration is set in the +# configuration file and other logging configuration options are ignored (for +# example, logging_context_format_string). (string value) +# Note: This option can be changed without restarting. +# Deprecated group/name - [DEFAULT]/log_config +# from .default.oslo.log.log_config_append +{{ if not .default.oslo.log.log_config_append }}#{{ end }}log_config_append = {{ .default.oslo.log.log_config_append | default "" }} + +# Defines the format string for %%(asctime)s in log records. Default: +# %(default)s . This option is ignored if log_config_append is set. (string +# value) +# from .default.oslo.log.log_date_format +{{ if not .default.oslo.log.log_date_format }}#{{ end }}log_date_format = {{ .default.oslo.log.log_date_format | default "%Y-%m-%d %H:%M:%S" }} + +# (Optional) Name of log file to send logging output to. If no default is set, +# logging will go to stderr as defined by use_stderr. This option is ignored if +# log_config_append is set. (string value) +# Deprecated group/name - [DEFAULT]/logfile +# from .default.oslo.log.log_file +{{ if not .default.oslo.log.log_file }}#{{ end }}log_file = {{ .default.oslo.log.log_file | default "" }} + +# (Optional) The base directory used for relative log_file paths. This option +# is ignored if log_config_append is set. (string value) +# Deprecated group/name - [DEFAULT]/logdir +# from .default.oslo.log.log_dir +{{ if not .default.oslo.log.log_dir }}#{{ end }}log_dir = {{ .default.oslo.log.log_dir | default "" }} + +# Uses logging handler designed to watch file system. When log file is moved or +# removed this handler will open a new log file with specified path +# instantaneously. It makes sense only if log_file option is specified and Linux +# platform is used. This option is ignored if log_config_append is set. (boolean +# value) +# from .default.oslo.log.watch_log_file +{{ if not .default.oslo.log.watch_log_file }}#{{ end }}watch_log_file = {{ .default.oslo.log.watch_log_file | default "false" }} + +# Use syslog for logging. Existing syslog format is DEPRECATED and will be +# changed later to honor RFC5424. This option is ignored if log_config_append is +# set. (boolean value) +# from .default.oslo.log.use_syslog +{{ if not .default.oslo.log.use_syslog }}#{{ end }}use_syslog = {{ .default.oslo.log.use_syslog | default "false" }} + +# Syslog facility to receive log lines. This option is ignored if +# log_config_append is set. (string value) +# from .default.oslo.log.syslog_log_facility +{{ if not .default.oslo.log.syslog_log_facility }}#{{ end }}syslog_log_facility = {{ .default.oslo.log.syslog_log_facility | default "LOG_USER" }} + +# Log output to standard error. This option is ignored if log_config_append is +# set. (boolean value) +# from .default.oslo.log.use_stderr +{{ if not .default.oslo.log.use_stderr }}#{{ end }}use_stderr = {{ .default.oslo.log.use_stderr | default "true" }} + +# Format string to use for log messages with context. (string value) +# from .default.oslo.log.logging_context_format_string +{{ if not .default.oslo.log.logging_context_format_string }}#{{ end }}logging_context_format_string = {{ .default.oslo.log.logging_context_format_string | default "%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s" }} + +# Format string to use for log messages when context is undefined. (string +# value) +# from .default.oslo.log.logging_default_format_string +{{ if not .default.oslo.log.logging_default_format_string }}#{{ end }}logging_default_format_string = {{ .default.oslo.log.logging_default_format_string | default "%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s" }} + +# Additional data to append to log message when logging level for the message is +# DEBUG. (string value) +# from .default.oslo.log.logging_debug_format_suffix +{{ if not .default.oslo.log.logging_debug_format_suffix }}#{{ end }}logging_debug_format_suffix = {{ .default.oslo.log.logging_debug_format_suffix | default "%(funcName)s %(pathname)s:%(lineno)d" }} + +# Prefix each line of exception output with this format. (string value) +# from .default.oslo.log.logging_exception_prefix +{{ if not .default.oslo.log.logging_exception_prefix }}#{{ end }}logging_exception_prefix = {{ .default.oslo.log.logging_exception_prefix | default "%(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s" }} + +# Defines the format string for %(user_identity)s that is used in +# logging_context_format_string. (string value) +# from .default.oslo.log.logging_user_identity_format +{{ if not .default.oslo.log.logging_user_identity_format }}#{{ end }}logging_user_identity_format = {{ .default.oslo.log.logging_user_identity_format | default "%(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s" }} + +# List of package logging levels in logger=LEVEL pairs. This option is ignored +# if log_config_append is set. (list value) +# from .default.oslo.log.default_log_levels +{{ if not .default.oslo.log.default_log_levels }}#{{ end }}default_log_levels = {{ .default.oslo.log.default_log_levels | default "amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO" }} + +# Enables or disables publication of error events. (boolean value) +# from .default.oslo.log.publish_errors +{{ if not .default.oslo.log.publish_errors }}#{{ end }}publish_errors = {{ .default.oslo.log.publish_errors | default "false" }} + +# The format for an instance that is passed with the log message. (string value) +# from .default.oslo.log.instance_format +{{ if not .default.oslo.log.instance_format }}#{{ end }}instance_format = {{ .default.oslo.log.instance_format | default "\"[instance: %(uuid)s] \"" }} + +# The format for an instance UUID that is passed with the log message. (string +# value) +# from .default.oslo.log.instance_uuid_format +{{ if not .default.oslo.log.instance_uuid_format }}#{{ end }}instance_uuid_format = {{ .default.oslo.log.instance_uuid_format | default "\"[instance: %(uuid)s] \"" }} + +# Enables or disables fatal status of deprecations. (boolean value) +# from .default.oslo.log.fatal_deprecations +{{ if not .default.oslo.log.fatal_deprecations }}#{{ end }}fatal_deprecations = {{ .default.oslo.log.fatal_deprecations | default "false" }} + +# +# From oslo.messaging +# + +# Size of RPC connection pool. (integer value) +# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size +# from .default.oslo.messaging.rpc_conn_pool_size +{{ if not .default.oslo.messaging.rpc_conn_pool_size }}#{{ end }}rpc_conn_pool_size = {{ .default.oslo.messaging.rpc_conn_pool_size | default "30" }} + +# The pool size limit for connections expiration policy (integer value) +# from .default.oslo.messaging.conn_pool_min_size +{{ if not .default.oslo.messaging.conn_pool_min_size }}#{{ end }}conn_pool_min_size = {{ .default.oslo.messaging.conn_pool_min_size | default "2" }} + +# The time-to-live in sec of idle connections in the pool (integer value) +# from .default.oslo.messaging.conn_pool_ttl +{{ if not .default.oslo.messaging.conn_pool_ttl }}#{{ end }}conn_pool_ttl = {{ .default.oslo.messaging.conn_pool_ttl | default "1200" }} + +# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. +# The "host" option should point or resolve to this address. (string value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address +# from .default.oslo.messaging.rpc_zmq_bind_address +{{ if not .default.oslo.messaging.rpc_zmq_bind_address }}#{{ end }}rpc_zmq_bind_address = {{ .default.oslo.messaging.rpc_zmq_bind_address | default "*" }} + +# MatchMaker driver. (string value) +# Allowed values: redis, dummy +# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker +# from .default.oslo.messaging.rpc_zmq_matchmaker +{{ if not .default.oslo.messaging.rpc_zmq_matchmaker }}#{{ end }}rpc_zmq_matchmaker = {{ .default.oslo.messaging.rpc_zmq_matchmaker | default "redis" }} + +# Number of ZeroMQ contexts, defaults to 1. (integer value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts +# from .default.oslo.messaging.rpc_zmq_contexts +{{ if not .default.oslo.messaging.rpc_zmq_contexts }}#{{ end }}rpc_zmq_contexts = {{ .default.oslo.messaging.rpc_zmq_contexts | default "1" }} + +# Maximum number of ingress messages to locally buffer per topic. Default is +# unlimited. (integer value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog +# from .default.oslo.messaging.rpc_zmq_topic_backlog +{{ if not .default.oslo.messaging.rpc_zmq_topic_backlog }}#{{ end }}rpc_zmq_topic_backlog = {{ .default.oslo.messaging.rpc_zmq_topic_backlog | default "" }} + +# Directory for holding IPC sockets. (string value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir +# from .default.oslo.messaging.rpc_zmq_ipc_dir +{{ if not .default.oslo.messaging.rpc_zmq_ipc_dir }}#{{ end }}rpc_zmq_ipc_dir = {{ .default.oslo.messaging.rpc_zmq_ipc_dir | default "/var/run/openstack" }} + +# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match +# "host" option, if running Nova. (string value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_host +# from .default.oslo.messaging.rpc_zmq_host +{{ if not .default.oslo.messaging.rpc_zmq_host }}#{{ end }}rpc_zmq_host = {{ .default.oslo.messaging.rpc_zmq_host | default "localhost" }} + +# Seconds to wait before a cast expires (TTL). The default value of -1 specifies +# an infinite linger period. The value of 0 specifies no linger period. Pending +# messages shall be discarded immediately when the socket is closed. Only +# supported by impl_zmq. (integer value) +# Deprecated group/name - [DEFAULT]/rpc_cast_timeout +# from .default.oslo.messaging.rpc_cast_timeout +{{ if not .default.oslo.messaging.rpc_cast_timeout }}#{{ end }}rpc_cast_timeout = {{ .default.oslo.messaging.rpc_cast_timeout | default "-1" }} + +# The default number of seconds that poll should wait. Poll raises timeout +# exception when timeout expired. (integer value) +# Deprecated group/name - [DEFAULT]/rpc_poll_timeout +# from .default.oslo.messaging.rpc_poll_timeout +{{ if not .default.oslo.messaging.rpc_poll_timeout }}#{{ end }}rpc_poll_timeout = {{ .default.oslo.messaging.rpc_poll_timeout | default "1" }} + +# Expiration timeout in seconds of a name service record about existing target ( +# < 0 means no timeout). (integer value) +# Deprecated group/name - [DEFAULT]/zmq_target_expire +# from .default.oslo.messaging.zmq_target_expire +{{ if not .default.oslo.messaging.zmq_target_expire }}#{{ end }}zmq_target_expire = {{ .default.oslo.messaging.zmq_target_expire | default "300" }} + +# Update period in seconds of a name service record about existing target. +# (integer value) +# Deprecated group/name - [DEFAULT]/zmq_target_update +# from .default.oslo.messaging.zmq_target_update +{{ if not .default.oslo.messaging.zmq_target_update }}#{{ end }}zmq_target_update = {{ .default.oslo.messaging.zmq_target_update | default "180" }} + +# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean +# value) +# Deprecated group/name - [DEFAULT]/use_pub_sub +# from .default.oslo.messaging.use_pub_sub +{{ if not .default.oslo.messaging.use_pub_sub }}#{{ end }}use_pub_sub = {{ .default.oslo.messaging.use_pub_sub | default "true" }} + +# Use ROUTER remote proxy. (boolean value) +# Deprecated group/name - [DEFAULT]/use_router_proxy +# from .default.oslo.messaging.use_router_proxy +{{ if not .default.oslo.messaging.use_router_proxy }}#{{ end }}use_router_proxy = {{ .default.oslo.messaging.use_router_proxy | default "true" }} + +# Minimal port number for random ports range. (port value) +# Minimum value: 0 +# Maximum value: 65535 +# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port +# from .default.oslo.messaging.rpc_zmq_min_port +{{ if not .default.oslo.messaging.rpc_zmq_min_port }}#{{ end }}rpc_zmq_min_port = {{ .default.oslo.messaging.rpc_zmq_min_port | default "49153" }} + +# Maximal port number for random ports range. (integer value) +# Minimum value: 1 +# Maximum value: 65536 +# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port +# from .default.oslo.messaging.rpc_zmq_max_port +{{ if not .default.oslo.messaging.rpc_zmq_max_port }}#{{ end }}rpc_zmq_max_port = {{ .default.oslo.messaging.rpc_zmq_max_port | default "65536" }} + +# Number of retries to find free port number before fail with ZMQBindError. +# (integer value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries +# from .default.oslo.messaging.rpc_zmq_bind_port_retries +{{ if not .default.oslo.messaging.rpc_zmq_bind_port_retries }}#{{ end }}rpc_zmq_bind_port_retries = {{ .default.oslo.messaging.rpc_zmq_bind_port_retries | default "100" }} + +# Default serialization mechanism for serializing/deserializing +# outgoing/incoming messages (string value) +# Allowed values: json, msgpack +# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization +# from .default.oslo.messaging.rpc_zmq_serialization +{{ if not .default.oslo.messaging.rpc_zmq_serialization }}#{{ end }}rpc_zmq_serialization = {{ .default.oslo.messaging.rpc_zmq_serialization | default "json" }} + +# This option configures round-robin mode in zmq socket. True means not keeping +# a queue when server side disconnects. False means to keep queue and messages +# even if server is disconnected, when the server appears we send all +# accumulated messages to it. (boolean value) +# from .default.oslo.messaging.zmq_immediate +{{ if not .default.oslo.messaging.zmq_immediate }}#{{ end }}zmq_immediate = {{ .default.oslo.messaging.zmq_immediate | default "false" }} + +# Size of executor thread pool. (integer value) +# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size +# from .default.oslo.messaging.executor_thread_pool_size +{{ if not .default.oslo.messaging.executor_thread_pool_size }}#{{ end }}executor_thread_pool_size = {{ .default.oslo.messaging.executor_thread_pool_size | default "64" }} + +# Seconds to wait for a response from a call. (integer value) +# from .default.oslo.messaging.rpc_response_timeout +{{ if not .default.oslo.messaging.rpc_response_timeout }}#{{ end }}rpc_response_timeout = {{ .default.oslo.messaging.rpc_response_timeout | default "60" }} + +# A URL representing the messaging driver to use and its full configuration. +# (string value) +# from .default.oslo.messaging.transport_url +{{ if not .default.oslo.messaging.transport_url }}#{{ end }}transport_url = {{ .default.oslo.messaging.transport_url | default "" }} + +# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers +# include amqp and zmq. (string value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Replaced by [DEFAULT]/transport_url +# from .default.oslo.messaging.rpc_backend +{{ if not .default.oslo.messaging.rpc_backend }}#{{ end }}rpc_backend = {{ .default.oslo.messaging.rpc_backend | default "rabbit" }} + +# The default exchange under which topics are scoped. May be overridden by an +# exchange name specified in the transport_url option. (string value) +# from .default.oslo.messaging.control_exchange +{{ if not .default.oslo.messaging.control_exchange }}#{{ end }}control_exchange = {{ .default.oslo.messaging.control_exchange | default "openstack" }} + + +[cors] + +# +# From oslo.middleware.cors +# + +# Indicate whether this resource may be shared with the domain received in the +# requests "origin" header. Format: "://[:]", no trailing +# slash. Example: https://horizon.example.com (list value) +# from .cors.oslo.middleware.cors.allowed_origin +{{ if not .cors.oslo.middleware.cors.allowed_origin }}#{{ end }}allowed_origin = {{ .cors.oslo.middleware.cors.allowed_origin | default "" }} + +# Indicate that the actual request can include user credentials (boolean value) +# from .cors.oslo.middleware.cors.allow_credentials +{{ if not .cors.oslo.middleware.cors.allow_credentials }}#{{ end }}allow_credentials = {{ .cors.oslo.middleware.cors.allow_credentials | default "true" }} + +# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple +# Headers. (list value) +# from .cors.oslo.middleware.cors.expose_headers +{{ if not .cors.oslo.middleware.cors.expose_headers }}#{{ end }}expose_headers = {{ .cors.oslo.middleware.cors.expose_headers | default "X-Image-Meta-Checksum,X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID" }} + +# Maximum cache age of CORS preflight requests. (integer value) +# from .cors.oslo.middleware.cors.max_age +{{ if not .cors.oslo.middleware.cors.max_age }}#{{ end }}max_age = {{ .cors.oslo.middleware.cors.max_age | default "3600" }} + +# Indicate which methods can be used during the actual request. (list value) +# from .cors.oslo.middleware.cors.allow_methods +{{ if not .cors.oslo.middleware.cors.allow_methods }}#{{ end }}allow_methods = {{ .cors.oslo.middleware.cors.allow_methods | default "GET,PUT,POST,DELETE,PATCH" }} + +# Indicate which header field names may be used during the actual request. (list +# value) +# from .cors.oslo.middleware.cors.allow_headers +{{ if not .cors.oslo.middleware.cors.allow_headers }}#{{ end }}allow_headers = {{ .cors.oslo.middleware.cors.allow_headers | default "Content-MD5,X-Image-Meta-Checksum,X-Storage-Token,Accept-Encoding,X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID" }} + + +[cors.subdomain] + +# +# From oslo.middleware.cors +# + +# Indicate whether this resource may be shared with the domain received in the +# requests "origin" header. Format: "://[:]", no trailing +# slash. Example: https://horizon.example.com (list value) +# from .cors.subdomain.oslo.middleware.cors.allowed_origin +{{ if not .cors.subdomain.oslo.middleware.cors.allowed_origin }}#{{ end }}allowed_origin = {{ .cors.subdomain.oslo.middleware.cors.allowed_origin | default "" }} + +# Indicate that the actual request can include user credentials (boolean value) +# from .cors.subdomain.oslo.middleware.cors.allow_credentials +{{ if not .cors.subdomain.oslo.middleware.cors.allow_credentials }}#{{ end }}allow_credentials = {{ .cors.subdomain.oslo.middleware.cors.allow_credentials | default "true" }} + +# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple +# Headers. (list value) +# from .cors.subdomain.oslo.middleware.cors.expose_headers +{{ if not .cors.subdomain.oslo.middleware.cors.expose_headers }}#{{ end }}expose_headers = {{ .cors.subdomain.oslo.middleware.cors.expose_headers | default "X-Image-Meta-Checksum,X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID" }} + +# Maximum cache age of CORS preflight requests. (integer value) +# from .cors.subdomain.oslo.middleware.cors.max_age +{{ if not .cors.subdomain.oslo.middleware.cors.max_age }}#{{ end }}max_age = {{ .cors.subdomain.oslo.middleware.cors.max_age | default "3600" }} + +# Indicate which methods can be used during the actual request. (list value) +# from .cors.subdomain.oslo.middleware.cors.allow_methods +{{ if not .cors.subdomain.oslo.middleware.cors.allow_methods }}#{{ end }}allow_methods = {{ .cors.subdomain.oslo.middleware.cors.allow_methods | default "GET,PUT,POST,DELETE,PATCH" }} + +# Indicate which header field names may be used during the actual request. (list +# value) +# from .cors.subdomain.oslo.middleware.cors.allow_headers +{{ if not .cors.subdomain.oslo.middleware.cors.allow_headers }}#{{ end }}allow_headers = {{ .cors.subdomain.oslo.middleware.cors.allow_headers | default "Content-MD5,X-Image-Meta-Checksum,X-Storage-Token,Accept-Encoding,X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID" }} -bind_port = {{ .Values.network.api.port }} -workers = {{ .Values.misc.workers }} -registry_host = glance-registry -# Enable Copy-on-Write -show_image_direct_url = True [database] -connection = {{ tuple "oslo_db" "internal" "user" "mysql" . | include "helm-toolkit.authenticated_endpoint_uri_lookup" }} -max_retries = -1 -[keystone_authtoken] -auth_version = v3 -auth_url = {{ tuple "identity" "internal" "api" . | include "helm-toolkit.keystone_endpoint_uri_lookup" }} -auth_type = password -region_name = {{ .Values.keystone.glance_region_name }} -project_domain_name = {{ .Values.keystone.glance_project_domain }} -project_name = {{ .Values.keystone.glance_project_name }} -user_domain_name = {{ .Values.keystone.glance_user_domain }} -username = {{ .Values.keystone.glance_user }} -password = {{ .Values.keystone.glance_password }} +# +# From oslo.db +# -[paste_deploy] -flavor = keystone +# DEPRECATED: The file name to use with SQLite. (string value) +# Deprecated group/name - [DEFAULT]/sqlite_db +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Should use config option connection or slave_connection to connect the +# database. +# from .database.oslo.db.sqlite_db +{{ if not .database.oslo.db.sqlite_db }}#{{ end }}sqlite_db = {{ .database.oslo.db.sqlite_db | default "oslo.sqlite" }} + +# If True, SQLite uses synchronous mode. (boolean value) +# Deprecated group/name - [DEFAULT]/sqlite_synchronous +# from .database.oslo.db.sqlite_synchronous +{{ if not .database.oslo.db.sqlite_synchronous }}#{{ end }}sqlite_synchronous = {{ .database.oslo.db.sqlite_synchronous | default "true" }} + +# The back end to use for the database. (string value) +# Deprecated group/name - [DEFAULT]/db_backend +# from .database.oslo.db.backend +{{ if not .database.oslo.db.backend }}#{{ end }}backend = {{ .database.oslo.db.backend | default "sqlalchemy" }} + +# The SQLAlchemy connection string to use to connect to the database. (string +# value) +# Deprecated group/name - [DEFAULT]/sql_connection +# Deprecated group/name - [DATABASE]/sql_connection +# Deprecated group/name - [sql]/connection +# from .database.oslo.db.connection +{{ if not .database.oslo.db.connection }}#{{ end }}connection = {{ .database.oslo.db.connection | default "" }} + +# The SQLAlchemy connection string to use to connect to the slave database. +# (string value) +# from .database.oslo.db.slave_connection +{{ if not .database.oslo.db.slave_connection }}#{{ end }}slave_connection = {{ .database.oslo.db.slave_connection | default "" }} + +# The SQL mode to be used for MySQL sessions. This option, including the +# default, overrides any server-set SQL mode. To use whatever SQL mode is set by +# the server configuration, set this to no value. Example: mysql_sql_mode= +# (string value) +# from .database.oslo.db.mysql_sql_mode +{{ if not .database.oslo.db.mysql_sql_mode }}#{{ end }}mysql_sql_mode = {{ .database.oslo.db.mysql_sql_mode | default "TRADITIONAL" }} + +# Timeout before idle SQL connections are reaped. (integer value) +# Deprecated group/name - [DEFAULT]/sql_idle_timeout +# Deprecated group/name - [DATABASE]/sql_idle_timeout +# Deprecated group/name - [sql]/idle_timeout +# from .database.oslo.db.idle_timeout +{{ if not .database.oslo.db.idle_timeout }}#{{ end }}idle_timeout = {{ .database.oslo.db.idle_timeout | default "3600" }} + +# Minimum number of SQL connections to keep open in a pool. (integer value) +# Deprecated group/name - [DEFAULT]/sql_min_pool_size +# Deprecated group/name - [DATABASE]/sql_min_pool_size +# from .database.oslo.db.min_pool_size +{{ if not .database.oslo.db.min_pool_size }}#{{ end }}min_pool_size = {{ .database.oslo.db.min_pool_size | default "1" }} + +# Maximum number of SQL connections to keep open in a pool. Setting a value of 0 +# indicates no limit. (integer value) +# Deprecated group/name - [DEFAULT]/sql_max_pool_size +# Deprecated group/name - [DATABASE]/sql_max_pool_size +# from .database.oslo.db.max_pool_size +{{ if not .database.oslo.db.max_pool_size }}#{{ end }}max_pool_size = {{ .database.oslo.db.max_pool_size | default "5" }} + +# Maximum number of database connection retries during startup. Set to -1 to +# specify an infinite retry count. (integer value) +# Deprecated group/name - [DEFAULT]/sql_max_retries +# Deprecated group/name - [DATABASE]/sql_max_retries +# from .database.oslo.db.max_retries +{{ if not .database.oslo.db.max_retries }}#{{ end }}max_retries = {{ .database.oslo.db.max_retries | default "10" }} + +# Interval between retries of opening a SQL connection. (integer value) +# Deprecated group/name - [DEFAULT]/sql_retry_interval +# Deprecated group/name - [DATABASE]/reconnect_interval +# from .database.oslo.db.retry_interval +{{ if not .database.oslo.db.retry_interval }}#{{ end }}retry_interval = {{ .database.oslo.db.retry_interval | default "10" }} + +# If set, use this value for max_overflow with SQLAlchemy. (integer value) +# Deprecated group/name - [DEFAULT]/sql_max_overflow +# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow +# from .database.oslo.db.max_overflow +{{ if not .database.oslo.db.max_overflow }}#{{ end }}max_overflow = {{ .database.oslo.db.max_overflow | default "50" }} + +# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer +# value) +# Minimum value: 0 +# Maximum value: 100 +# Deprecated group/name - [DEFAULT]/sql_connection_debug +# from .database.oslo.db.connection_debug +{{ if not .database.oslo.db.connection_debug }}#{{ end }}connection_debug = {{ .database.oslo.db.connection_debug | default "0" }} + +# Add Python stack traces to SQL as comment strings. (boolean value) +# Deprecated group/name - [DEFAULT]/sql_connection_trace +# from .database.oslo.db.connection_trace +{{ if not .database.oslo.db.connection_trace }}#{{ end }}connection_trace = {{ .database.oslo.db.connection_trace | default "false" }} + +# If set, use this value for pool_timeout with SQLAlchemy. (integer value) +# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout +# from .database.oslo.db.pool_timeout +{{ if not .database.oslo.db.pool_timeout }}#{{ end }}pool_timeout = {{ .database.oslo.db.pool_timeout | default "" }} + +# Enable the experimental use of database reconnect on connection lost. (boolean +# value) +# from .database.oslo.db.use_db_reconnect +{{ if not .database.oslo.db.use_db_reconnect }}#{{ end }}use_db_reconnect = {{ .database.oslo.db.use_db_reconnect | default "false" }} + +# Seconds between retries of a database transaction. (integer value) +# from .database.oslo.db.db_retry_interval +{{ if not .database.oslo.db.db_retry_interval }}#{{ end }}db_retry_interval = {{ .database.oslo.db.db_retry_interval | default "1" }} + +# If True, increases the interval between retries of a database operation up to +# db_max_retry_interval. (boolean value) +# from .database.oslo.db.db_inc_retry_interval +{{ if not .database.oslo.db.db_inc_retry_interval }}#{{ end }}db_inc_retry_interval = {{ .database.oslo.db.db_inc_retry_interval | default "true" }} + +# If db_inc_retry_interval is set, the maximum seconds between retries of a +# database operation. (integer value) +# from .database.oslo.db.db_max_retry_interval +{{ if not .database.oslo.db.db_max_retry_interval }}#{{ end }}db_max_retry_interval = {{ .database.oslo.db.db_max_retry_interval | default "10" }} + +# Maximum retries in case of connection error or deadlock error before error is +# raised. Set to -1 to specify an infinite retry count. (integer value) +# from .database.oslo.db.db_max_retries +{{ if not .database.oslo.db.db_max_retries }}#{{ end }}db_max_retries = {{ .database.oslo.db.db_max_retries | default "20" }} + +# +# From oslo.db.concurrency +# + +# Enable the experimental use of thread pooling for all DB API calls (boolean +# value) +# Deprecated group/name - [DEFAULT]/dbapi_use_tpool +# from .database.oslo.db.concurrency.use_tpool +{{ if not .database.oslo.db.concurrency.use_tpool }}#{{ end }}use_tpool = {{ .database.oslo.db.concurrency.use_tpool | default "false" }} -[oslo_messaging_notifications] -driver = noop [glance_store] -filesystem_store_datadir = /var/lib/glance/images/ -{{- if .Values.development.enabled }} -stores = file, http -default_store = file -{{- else }} -stores = file, http, rbd -default_store = rbd -rbd_store_pool = {{ .Values.ceph.glance_pool }} -rbd_store_user = {{ .Values.ceph.glance_user }} -rbd_store_ceph_conf = /etc/ceph/ceph.conf -rbd_store_chunk_size = 8 -{{- end }} + +# +# From glance.store +# + +# +# List of enabled Glance stores. +# +# Register the storage backends to use for storing disk images +# as a comma separated list. The default stores enabled for +# storing disk images with Glance are ``file`` and ``http``. +# +# Possible values: +# * A comma separated list that could include: +# * file +# * http +# * swift +# * rbd +# * sheepdog +# * cinder +# * vmware +# +# Related Options: +# * default_store +# +# (list value) +# from .glance_store.glance.store.stores +{{ if not .glance_store.glance.store.stores }}#{{ end }}stores = {{ .glance_store.glance.store.stores | default "file,http" }} + +# +# The default scheme to use for storing images. +# +# Provide a string value representing the default scheme to use for +# storing images. If not set, Glance uses ``file`` as the default +# scheme to store images with the ``file`` store. +# +# NOTE: The value given for this configuration option must be a valid +# scheme for a store registered with the ``stores`` configuration +# option. +# +# Possible values: +# * file +# * filesystem +# * http +# * https +# * swift +# * swift+http +# * swift+https +# * swift+config +# * rbd +# * sheepdog +# * cinder +# * vsphere +# +# Related Options: +# * stores +# +# (string value) +# Allowed values: file, filesystem, http, https, swift, swift+http, swift+https, swift+config, rbd, sheepdog, cinder, vsphere +# from .glance_store.glance.store.default_store +{{ if not .glance_store.glance.store.default_store }}#{{ end }}default_store = {{ .glance_store.glance.store.default_store | default "file" }} + +# +# Minimum interval in seconds to execute updating dynamic storage +# capabilities based on current backend status. +# +# Provide an integer value representing time in seconds to set the +# minimum interval before an update of dynamic storage capabilities +# for a storage backend can be attempted. Setting +# ``store_capabilities_update_min_interval`` does not mean updates +# occur periodically based on the set interval. Rather, the update +# is performed at the elapse of this interval set, if an operation +# of the store is triggered. +# +# By default, this option is set to zero and is disabled. Provide an +# integer value greater than zero to enable this option. +# +# NOTE: For more information on store capabilities and their updates, +# please visit: https://specs.openstack.org/openstack/glance-specs/specs/kilo +# /store-capabilities.html +# +# For more information on setting up a particular store in your +# deplyment and help with the usage of this feature, please contact +# the storage driver maintainers listed here: +# http://docs.openstack.org/developer/glance_store/drivers/index.html +# +# Possible values: +# * Zero +# * Positive integer +# +# Related Options: +# * None +# +# (integer value) +# Minimum value: 0 +# from .glance_store.glance.store.store_capabilities_update_min_interval +{{ if not .glance_store.glance.store.store_capabilities_update_min_interval }}#{{ end }}store_capabilities_update_min_interval = {{ .glance_store.glance.store.store_capabilities_update_min_interval | default "0" }} + +# +# Chunk size for images to be stored in Sheepdog data store. +# +# Provide an integer value representing the size in mebibyte +# (1048576 bytes) to chunk Glance images into. The default +# chunk size is 64 mebibytes. +# +# When using Sheepdog distributed storage system, the images are +# chunked into objects of this size and then stored across the +# distributed data store to use for Glance. +# +# Chunk sizes, if a power of two, help avoid fragmentation and +# enable improved performance. +# +# Possible values: +# * Positive integer value representing size in mebibytes. +# +# Related Options: +# * None +# +# (integer value) +# Minimum value: 1 +# from .glance_store.glance.store.sheepdog_store_chunk_size +{{ if not .glance_store.glance.store.sheepdog_store_chunk_size }}#{{ end }}sheepdog_store_chunk_size = {{ .glance_store.glance.store.sheepdog_store_chunk_size | default "64" }} + +# +# Port number on which the sheep daemon will listen. +# +# Provide an integer value representing a valid port number on +# which you want the Sheepdog daemon to listen on. The default +# port is 7000. +# +# The Sheepdog daemon, also called 'sheep', manages the storage +# in the distributed cluster by writing objects across the storage +# network. It identifies and acts on the messages it receives on +# the port number set using ``sheepdog_store_port`` option to store +# chunks of Glance images. +# +# Possible values: +# * A valid port number (0 to 65535) +# +# Related Options: +# * sheepdog_store_address +# +# (port value) +# Minimum value: 0 +# Maximum value: 65535 +# from .glance_store.glance.store.sheepdog_store_port +{{ if not .glance_store.glance.store.sheepdog_store_port }}#{{ end }}sheepdog_store_port = {{ .glance_store.glance.store.sheepdog_store_port | default "7000" }} + +# +# Address to bind the Sheepdog daemon to. +# +# Provide a string value representing the address to bind the +# Sheepdog daemon to. The default address set for the 'sheep' +# is 127.0.0.1. +# +# The Sheepdog daemon, also called 'sheep', manages the storage +# in the distributed cluster by writing objects across the storage +# network. It identifies and acts on the messages directed to the +# address set using ``sheepdog_store_address`` option to store +# chunks of Glance images. +# +# Possible values: +# * A valid IPv4 address +# * A valid IPv6 address +# * A valid hostname +# +# Related Options: +# * sheepdog_store_port +# +# (string value) +# from .glance_store.glance.store.sheepdog_store_address +{{ if not .glance_store.glance.store.sheepdog_store_address }}#{{ end }}sheepdog_store_address = {{ .glance_store.glance.store.sheepdog_store_address | default "127.0.0.1" }} + +# +# Set verification of the server certificate. +# +# This boolean determines whether or not to verify the server +# certificate. If this option is set to True, swiftclient won't check +# for a valid SSL certificate when authenticating. If the option is set +# to False, then the default CA truststore is used for verification. +# +# Possible values: +# * True +# * False +# +# Related options: +# * swift_store_cacert +# +# (boolean value) +# from .glance_store.glance.store.swift_store_auth_insecure +{{ if not .glance_store.glance.store.swift_store_auth_insecure }}#{{ end }}swift_store_auth_insecure = {{ .glance_store.glance.store.swift_store_auth_insecure | default "false" }} + +# +# Path to the CA bundle file. +# +# This configuration option enables the operator to specify the path to +# a custom Certificate Authority file for SSL verification when +# connecting to Swift. +# +# Possible values: +# * A valid path to a CA file +# +# Related options: +# * swift_store_auth_insecure +# +# (string value) +# from .glance_store.glance.store.swift_store_cacert +{{ if not .glance_store.glance.store.swift_store_cacert }}#{{ end }}swift_store_cacert = {{ .glance_store.glance.store.swift_store_cacert | default "/etc/ssl/certs/ca-certificates.crt" }} + +# +# The region of Swift endpoint to use by Glance. +# +# Provide a string value representing a Swift region where Glance +# can connect to for image storage. By default, there is no region +# set. +# +# When Glance uses Swift as the storage backend to store images +# for a specific tenant that has multiple endpoints, setting of a +# Swift region with ``swift_store_region`` allows Glance to connect +# to Swift in the specified region as opposed to a single region +# connectivity. +# +# This option can be configured for both single-tenant and +# multi-tenant storage. +# +# NOTE: Setting the region with ``swift_store_region`` is +# tenant-specific and is necessary ``only if`` the tenant has +# multiple endpoints across different regions. +# +# Possible values: +# * A string value representing a valid Swift region. +# +# Related Options: +# * None +# +# (string value) +# from .glance_store.glance.store.swift_store_region +{{ if not .glance_store.glance.store.swift_store_region }}#{{ end }}swift_store_region = {{ .glance_store.glance.store.swift_store_region | default "RegionTwo" }} + +# +# The URL endpoint to use for Swift backend storage. +# +# Provide a string value representing the URL endpoint to use for +# storing Glance images in Swift store. By default, an endpoint +# is not set and the storage URL returned by ``auth`` is used. +# Setting an endpoint with ``swift_store_endpoint`` overrides the +# storage URL and is used for Glance image storage. +# +# NOTE: The URL should include the path up to, but excluding the +# container. The location of an object is obtained by appending +# the container and object to the configured URL. +# +# Possible values: +# * String value representing a valid URL path up to a Swift container +# +# Related Options: +# * None +# +# (string value) +# from .glance_store.glance.store.swift_store_endpoint +{{ if not .glance_store.glance.store.swift_store_endpoint }}#{{ end }}swift_store_endpoint = {{ .glance_store.glance.store.swift_store_endpoint | default "https://swift.openstack.example.org/v1/path_not_including_container_name" }} + +# +# Endpoint Type of Swift service. +# +# This string value indicates the endpoint type to use to fetch the +# Swift endpoint. The endpoint type determines the actions the user will +# be allowed to perform, for instance, reading and writing to the Store. +# This setting is only used if swift_store_auth_version is greater than +# 1. +# +# Possible values: +# * publicURL +# * adminURL +# * internalURL +# +# Related options: +# * swift_store_endpoint +# +# (string value) +# Allowed values: publicURL, adminURL, internalURL +# from .glance_store.glance.store.swift_store_endpoint_type +{{ if not .glance_store.glance.store.swift_store_endpoint_type }}#{{ end }}swift_store_endpoint_type = {{ .glance_store.glance.store.swift_store_endpoint_type | default "publicURL" }} + +# +# Type of Swift service to use. +# +# Provide a string value representing the service type to use for +# storing images while using Swift backend storage. The default +# service type is set to ``object-store``. +# +# NOTE: If ``swift_store_auth_version`` is set to 2, the value for +# this configuration option needs to be ``object-store``. If using +# a higher version of Keystone or a different auth scheme, this +# option may be modified. +# +# Possible values: +# * A string representing a valid service type for Swift storage. +# +# Related Options: +# * None +# +# (string value) +# from .glance_store.glance.store.swift_store_service_type +{{ if not .glance_store.glance.store.swift_store_service_type }}#{{ end }}swift_store_service_type = {{ .glance_store.glance.store.swift_store_service_type | default "object-store" }} + +# +# Name of single container to store images/name prefix for multiple containers +# +# When a single container is being used to store images, this configuration +# option indicates the container within the Glance account to be used for +# storing all images. When multiple containers are used to store images, this +# will be the name prefix for all containers. Usage of single/multiple +# containers can be controlled using the configuration option +# ``swift_store_multiple_containers_seed``. +# +# When using multiple containers, the containers will be named after the value +# set for this configuration option with the first N chars of the image UUID +# as the suffix delimited by an underscore (where N is specified by +# ``swift_store_multiple_containers_seed``). +# +# Example: if the seed is set to 3 and swift_store_container = ``glance``, then +# an image with UUID ``fdae39a1-bac5-4238-aba4-69bcc726e848`` would be placed in +# the container ``glance_fda``. All dashes in the UUID are included when +# creating the container name but do not count toward the character limit, so +# when N=10 the container name would be ``glance_fdae39a1-ba.`` +# +# Possible values: +# * If using single container, this configuration option can be any string +# that is a valid swift container name in Glance's Swift account +# * If using multiple containers, this configuration option can be any +# string as long as it satisfies the container naming rules enforced by +# Swift. The value of ``swift_store_multiple_containers_seed`` should be +# taken into account as well. +# +# Related options: +# * ``swift_store_multiple_containers_seed`` +# * ``swift_store_multi_tenant`` +# * ``swift_store_create_container_on_put`` +# +# (string value) +# from .glance_store.glance.store.swift_store_container +{{ if not .glance_store.glance.store.swift_store_container }}#{{ end }}swift_store_container = {{ .glance_store.glance.store.swift_store_container | default "glance" }} + +# +# The size threshold, in MB, after which Glance will start segmenting image +# data. +# +# Swift has an upper limit on the size of a single uploaded object. By default, +# this is 5GB. To upload objects bigger than this limit, objects are segmented +# into multiple smaller objects that are tied together with a manifest file. +# For more detail, refer to +# http://docs.openstack.org/developer/swift/overview_large_objects.html +# +# This configuration option specifies the size threshold over which the Swift +# driver will start segmenting image data into multiple smaller files. +# Currently, the Swift driver only supports creating Dynamic Large Objects. +# +# NOTE: This should be set by taking into account the large object limit +# enforced by the Swift cluster in consideration. +# +# Possible values: +# * A positive integer that is less than or equal to the large object limit +# enforced by the Swift cluster in consideration. +# +# Related options: +# * ``swift_store_large_object_chunk_size`` +# +# (integer value) +# Minimum value: 1 +# from .glance_store.glance.store.swift_store_large_object_size +{{ if not .glance_store.glance.store.swift_store_large_object_size }}#{{ end }}swift_store_large_object_size = {{ .glance_store.glance.store.swift_store_large_object_size | default "5120" }} + +# +# The maximum size, in MB, of the segments when image data is segmented. +# +# When image data is segmented to upload images that are larger than the limit +# enforced by the Swift cluster, image data is broken into segments that are no +# bigger than the size specified by this configuration option. +# Refer to ``swift_store_large_object_size`` for more detail. +# +# For example: if ``swift_store_large_object_size`` is 5GB and +# ``swift_store_large_object_chunk_size`` is 1GB, an image of size 6.2GB will be +# segmented into 7 segments where the first six segments will be 1GB in size and +# the seventh segment will be 0.2GB. +# +# Possible values: +# * A positive integer that is less than or equal to the large object limit +# enforced by Swift cluster in consideration. +# +# Related options: +# * ``swift_store_large_object_size`` +# +# (integer value) +# Minimum value: 1 +# from .glance_store.glance.store.swift_store_large_object_chunk_size +{{ if not .glance_store.glance.store.swift_store_large_object_chunk_size }}#{{ end }}swift_store_large_object_chunk_size = {{ .glance_store.glance.store.swift_store_large_object_chunk_size | default "200" }} + +# +# Create container, if it doesn't already exist, when uploading image. +# +# At the time of uploading an image, if the corresponding container doesn't +# exist, it will be created provided this configuration option is set to True. +# By default, it won't be created. This behavior is applicable for both single +# and multiple containers mode. +# +# Possible values: +# * True +# * False +# +# Related options: +# * None +# +# (boolean value) +# from .glance_store.glance.store.swift_store_create_container_on_put +{{ if not .glance_store.glance.store.swift_store_create_container_on_put }}#{{ end }}swift_store_create_container_on_put = {{ .glance_store.glance.store.swift_store_create_container_on_put | default "false" }} + +# +# Store images in tenant's Swift account. +# +# This enables multi-tenant storage mode which causes Glance images to be stored +# in tenant specific Swift accounts. If this is disabled, Glance stores all +# images in its own account. More details multi-tenant store can be found at +# https://wiki.openstack.org/wiki/GlanceSwiftTenantSpecificStorage +# +# Possible values: +# * True +# * False +# +# Related options: +# * None +# +# (boolean value) +# from .glance_store.glance.store.swift_store_multi_tenant +{{ if not .glance_store.glance.store.swift_store_multi_tenant }}#{{ end }}swift_store_multi_tenant = {{ .glance_store.glance.store.swift_store_multi_tenant | default "false" }} + +# +# Seed indicating the number of containers to use for storing images. +# +# When using a single-tenant store, images can be stored in one or more than one +# containers. When set to 0, all images will be stored in one single container. +# When set to an integer value between 1 and 32, multiple containers will be +# used to store images. This configuration option will determine how many +# containers are created. The total number of containers that will be used is +# equal to 16^N, so if this config option is set to 2, then 16^2=256 containers +# will be used to store images. +# +# Please refer to ``swift_store_container`` for more detail on the naming +# convention. More detail about using multiple containers can be found at +# https://specs.openstack.org/openstack/glance-specs/specs/kilo/swift-store- +# multiple-containers.html +# +# NOTE: This is used only when swift_store_multi_tenant is disabled. +# +# Possible values: +# * A non-negative integer less than or equal to 32 +# +# Related options: +# * ``swift_store_container`` +# * ``swift_store_multi_tenant`` +# * ``swift_store_create_container_on_put`` +# +# (integer value) +# Minimum value: 0 +# Maximum value: 32 +# from .glance_store.glance.store.swift_store_multiple_containers_seed +{{ if not .glance_store.glance.store.swift_store_multiple_containers_seed }}#{{ end }}swift_store_multiple_containers_seed = {{ .glance_store.glance.store.swift_store_multiple_containers_seed | default "0" }} + +# +# List of tenants that will be granted admin access. +# +# This is a list of tenants that will be granted read/write access on +# all Swift containers created by Glance in multi-tenant mode. The +# default value is an empty list. +# +# Possible values: +# * A comma separated list of strings representing UUIDs of Keystone +# projects/tenants +# +# Related options: +# * None +# +# (list value) +# from .glance_store.glance.store.swift_store_admin_tenants +{{ if not .glance_store.glance.store.swift_store_admin_tenants }}#{{ end }}swift_store_admin_tenants = {{ .glance_store.glance.store.swift_store_admin_tenants | default "" }} + +# +# SSL layer compression for HTTPS Swift requests. +# +# Provide a boolean value to determine whether or not to compress +# HTTPS Swift requests for images at the SSL layer. By default, +# compression is enabled. +# +# When using Swift as the backend store for Glance image storage, +# SSL layer compression of HTTPS Swift requests can be set using +# this option. If set to False, SSL layer compression of HTTPS +# Swift requests is disabled. Disabling this option may improve +# performance for images which are already in a compressed format, +# for example, qcow2. +# +# Possible values: +# * True +# * False +# +# Related Options: +# * None +# +# (boolean value) +# from .glance_store.glance.store.swift_store_ssl_compression +{{ if not .glance_store.glance.store.swift_store_ssl_compression }}#{{ end }}swift_store_ssl_compression = {{ .glance_store.glance.store.swift_store_ssl_compression | default "true" }} + +# +# The number of times a Swift download will be retried before the +# request fails. +# +# Provide an integer value representing the number of times an image +# download must be retried before erroring out. The default value is +# zero (no retry on a failed image download). When set to a positive +# integer value, ``swift_store_retry_get_count`` ensures that the +# download is attempted this many more times upon a download failure +# before sending an error message. +# +# Possible values: +# * Zero +# * Positive integer value +# +# Related Options: +# * None +# +# (integer value) +# Minimum value: 0 +# from .glance_store.glance.store.swift_store_retry_get_count +{{ if not .glance_store.glance.store.swift_store_retry_get_count }}#{{ end }}swift_store_retry_get_count = {{ .glance_store.glance.store.swift_store_retry_get_count | default "0" }} + +# +# Time in seconds defining the size of the window in which a new +# token may be requested before the current token is due to expire. +# +# Typically, the Swift storage driver fetches a new token upon the +# expiration of the current token to ensure continued access to +# Swift. However, some Swift transactions (like uploading image +# segments) may not recover well if the token expires on the fly. +# +# Hence, by fetching a new token before the current token expiration, +# we make sure that the token does not expire or is close to expiry +# before a transaction is attempted. By default, the Swift storage +# driver requests for a new token 60 seconds or less before the +# current token expiration. +# +# Possible values: +# * Zero +# * Positive integer value +# +# Related Options: +# * None +# +# (integer value) +# Minimum value: 0 +# from .glance_store.glance.store.swift_store_expire_soon_interval +{{ if not .glance_store.glance.store.swift_store_expire_soon_interval }}#{{ end }}swift_store_expire_soon_interval = {{ .glance_store.glance.store.swift_store_expire_soon_interval | default "60" }} + +# +# Use trusts for multi-tenant Swift store. +# +# This option instructs the Swift store to create a trust for each +# add/get request when the multi-tenant store is in use. Using trusts +# allows the Swift store to avoid problems that can be caused by an +# authentication token expiring during the upload or download of data. +# +# By default, ``swift_store_use_trusts`` is set to ``True``(use of +# trusts is enabled). If set to ``False``, a user token is used for +# the Swift connection instead, eliminating the overhead of trust +# creation. +# +# NOTE: This option is considered only when +# ``swift_store_multi_tenant`` is set to ``True`` +# +# Possible values: +# * True +# * False +# +# Related options: +# * swift_store_multi_tenant +# +# (boolean value) +# from .glance_store.glance.store.swift_store_use_trusts +{{ if not .glance_store.glance.store.swift_store_use_trusts }}#{{ end }}swift_store_use_trusts = {{ .glance_store.glance.store.swift_store_use_trusts | default "true" }} + +# +# Reference to default Swift account/backing store parameters. +# +# Provide a string value representing a reference to the default set +# of parameters required for using swift account/backing store for +# image storage. The default reference value for this configuration +# option is 'ref1'. This configuration option dereferences the +# parameters and facilitates image storage in Swift storage backend +# every time a new image is added. +# +# Possible values: +# * A valid string value +# +# Related options: +# * None +# +# (string value) +# from .glance_store.glance.store.default_swift_reference +{{ if not .glance_store.glance.store.default_swift_reference }}#{{ end }}default_swift_reference = {{ .glance_store.glance.store.default_swift_reference | default "ref1" }} + +# DEPRECATED: Version of the authentication service to use. Valid versions are 2 +# and 3 for keystone and 1 (deprecated) for swauth and rackspace. (string value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: +# The option 'auth_version' in the Swift back-end configuration file is +# used instead. +# from .glance_store.glance.store.swift_store_auth_version +{{ if not .glance_store.glance.store.swift_store_auth_version }}#{{ end }}swift_store_auth_version = {{ .glance_store.glance.store.swift_store_auth_version | default "2" }} + +# DEPRECATED: The address where the Swift authentication service is listening. +# (string value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: +# The option 'auth_address' in the Swift back-end configuration file is +# used instead. +# from .glance_store.glance.store.swift_store_auth_address +{{ if not .glance_store.glance.store.swift_store_auth_address }}#{{ end }}swift_store_auth_address = {{ .glance_store.glance.store.swift_store_auth_address | default "" }} + +# DEPRECATED: The user to authenticate against the Swift authentication service. +# (string value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: +# The option 'user' in the Swift back-end configuration file is set instead. +# from .glance_store.glance.store.swift_store_user +{{ if not .glance_store.glance.store.swift_store_user }}#{{ end }}swift_store_user = {{ .glance_store.glance.store.swift_store_user | default "" }} + +# DEPRECATED: Auth key for the user authenticating against the Swift +# authentication service. (string value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: +# The option 'key' in the Swift back-end configuration file is used +# to set the authentication key instead. +# from .glance_store.glance.store.swift_store_key +{{ if not .glance_store.glance.store.swift_store_key }}#{{ end }}swift_store_key = {{ .glance_store.glance.store.swift_store_key | default "" }} + +# +# Absolute path to the file containing the swift account(s) +# configurations. +# +# Include a string value representing the path to a configuration +# file that has references for each of the configured Swift +# account(s)/backing stores. By default, no file path is specified +# and customized Swift referencing is disabled. Configuring this +# option is highly recommended while using Swift storage backend for +# image storage as it avoids storage of credentials in the database. +# +# Possible values: +# * String value representing an absolute path on the glance-api +# node +# +# Related options: +# * None +# +# (string value) +# from .glance_store.glance.store.swift_store_config_file +{{ if not .glance_store.glance.store.swift_store_config_file }}#{{ end }}swift_store_config_file = {{ .glance_store.glance.store.swift_store_config_file | default "" }} + +# +# Directory to which the filesystem backend store writes images. +# +# Upon start up, Glance creates the directory if it doesn't already +# exist and verifies write access to the user under which +# ``glance-api`` runs. If the write access isn't available, a +# ``BadStoreConfiguration`` exception is raised and the filesystem +# store may not be available for adding new images. +# +# NOTE: This directory is used only when filesystem store is used as a +# storage backend. Either ``filesystem_store_datadir`` or +# ``filesystem_store_datadirs`` option must be specified in +# ``glance-api.conf``. If both options are specified, a +# ``BadStoreConfiguration`` will be raised and the filesystem store +# may not be available for adding new images. +# +# Possible values: +# * A valid path to a directory +# +# Related options: +# * ``filesystem_store_datadirs`` +# * ``filesystem_store_file_perm`` +# +# (string value) +# from .glance_store.glance.store.filesystem_store_datadir +{{ if not .glance_store.glance.store.filesystem_store_datadir }}#{{ end }}filesystem_store_datadir = {{ .glance_store.glance.store.filesystem_store_datadir | default "/var/lib/glance/images" }} + +# +# List of directories and their priorities to which the filesystem +# backend store writes images. +# +# The filesystem store can be configured to store images in multiple +# directories as opposed to using a single directory specified by the +# ``filesystem_store_datadir`` configuration option. When using +# multiple directories, each directory can be given an optional +# priority to specify the preference order in which they should +# be used. Priority is an integer that is concatenated to the +# directory path with a colon where a higher value indicates higher +# priority. When two directories have the same priority, the directory +# with most free space is used. When no priority is specified, it +# defaults to zero. +# +# More information on configuring filesystem store with multiple store +# directories can be found at +# http://docs.openstack.org/developer/glance/configuring.html +# +# NOTE: This directory is used only when filesystem store is used as a +# storage backend. Either ``filesystem_store_datadir`` or +# ``filesystem_store_datadirs`` option must be specified in +# ``glance-api.conf``. If both options are specified, a +# ``BadStoreConfiguration`` will be raised and the filesystem store +# may not be available for adding new images. +# +# Possible values: +# * List of strings of the following form: +# * ``:`` +# +# Related options: +# * ``filesystem_store_datadir`` +# * ``filesystem_store_file_perm`` +# +# (multi valued) +# from .glance_store.glance.store.filesystem_store_datadirs (multiopt) +{{ if not .glance_store.glance.store.filesystem_store_datadirs }}#filesystem_store_datadirs = {{ .glance_store.glance.store.filesystem_store_datadirs | default "" }}{{ else }}{{ range .glance_store.glance.store.filesystem_store_datadirs }}filesystem_store_datadirs = {{ . }}{{ end }}{{ end }} + +# +# Filesystem store metadata file. +# +# The path to a file which contains the metadata to be returned with +# any location associated with the filesystem store. The file must +# contain a valid JSON object. The object should contain the keys +# ``id`` and ``mountpoint``. The value for both keys should be a +# string. +# +# Possible values: +# * A valid path to the store metadata file +# +# Related options: +# * None +# +# (string value) +# from .glance_store.glance.store.filesystem_store_metadata_file +{{ if not .glance_store.glance.store.filesystem_store_metadata_file }}#{{ end }}filesystem_store_metadata_file = {{ .glance_store.glance.store.filesystem_store_metadata_file | default "" }} + +# +# File access permissions for the image files. +# +# Set the intended file access permissions for image data. This provides +# a way to enable other services, e.g. Nova, to consume images directly +# from the filesystem store. The users running the services that are +# intended to be given access to could be made a member of the group +# that owns the files created. Assigning a value less then or equal to +# zero for this configuration option signifies that no changes be made +# to the default permissions. This value will be decoded as an octal +# digit. +# +# For more information, please refer the documentation at +# http://docs.openstack.org/developer/glance/configuring.html +# +# Possible values: +# * A valid file access permission +# * Zero +# * Any negative integer +# +# Related options: +# * None +# +# (integer value) +# from .glance_store.glance.store.filesystem_store_file_perm +{{ if not .glance_store.glance.store.filesystem_store_file_perm }}#{{ end }}filesystem_store_file_perm = {{ .glance_store.glance.store.filesystem_store_file_perm | default "0" }} + +# +# Size, in megabytes, to chunk RADOS images into. +# +# Provide an integer value representing the size in megabytes to chunk +# Glance images into. The default chunk size is 8 megabytes. For optimal +# performance, the value should be a power of two. +# +# When Ceph's RBD object storage system is used as the storage backend +# for storing Glance images, the images are chunked into objects of the +# size set using this option. These chunked objects are then stored +# across the distributed block data store to use for Glance. +# +# Possible Values: +# * Any positive integer value +# +# Related options: +# * None +# +# (integer value) +# Minimum value: 1 +# from .glance_store.glance.store.rbd_store_chunk_size +{{ if not .glance_store.glance.store.rbd_store_chunk_size }}#{{ end }}rbd_store_chunk_size = {{ .glance_store.glance.store.rbd_store_chunk_size | default "8" }} + +# +# RADOS pool in which images are stored. +# +# When RBD is used as the storage backend for storing Glance images, the +# images are stored by means of logical grouping of the objects (chunks +# of images) into a ``pool``. Each pool is defined with the number of +# placement groups it can contain. The default pool that is used is +# 'images'. +# +# More information on the RBD storage backend can be found here: +# http://ceph.com/planet/how-data-is-stored-in-ceph-cluster/ +# +# Possible Values: +# * A valid pool name +# +# Related options: +# * None +# +# (string value) +# from .glance_store.glance.store.rbd_store_pool +{{ if not .glance_store.glance.store.rbd_store_pool }}#{{ end }}rbd_store_pool = {{ .glance_store.glance.store.rbd_store_pool | default "images" }} + +# +# RADOS user to authenticate as. +# +# This configuration option takes in the RADOS user to authenticate as. +# This is only needed when RADOS authentication is enabled and is +# applicable only if the user is using Cephx authentication. If the +# value for this option is not set by the user or is set to None, a +# default value will be chosen, which will be based on the client. +# section in rbd_store_ceph_conf. +# +# Possible Values: +# * A valid RADOS user +# +# Related options: +# * rbd_store_ceph_conf +# +# (string value) +# from .glance_store.glance.store.rbd_store_user +{{ if not .glance_store.glance.store.rbd_store_user }}#{{ end }}rbd_store_user = {{ .glance_store.glance.store.rbd_store_user | default "" }} + +# +# Ceph configuration file path. +# +# This configuration option takes in the path to the Ceph configuration +# file to be used. If the value for this option is not set by the user +# or is set to None, librados will locate the default configuration file +# which is located at /etc/ceph/ceph.conf. If using Cephx +# authentication, this file should include a reference to the right +# keyring in a client. section +# +# Possible Values: +# * A valid path to a configuration file +# +# Related options: +# * rbd_store_user +# +# (string value) +# from .glance_store.glance.store.rbd_store_ceph_conf +{{ if not .glance_store.glance.store.rbd_store_ceph_conf }}#{{ end }}rbd_store_ceph_conf = {{ .glance_store.glance.store.rbd_store_ceph_conf | default "/etc/ceph/ceph.conf" }} + +# +# Timeout value for connecting to Ceph cluster. +# +# This configuration option takes in the timeout value in seconds used +# when connecting to the Ceph cluster i.e. it sets the time to wait for +# glance-api before closing the connection. This prevents glance-api +# hangups during the connection to RBD. If the value for this option +# is set to less than or equal to 0, no timeout is set and the default +# librados value is used. +# +# Possible Values: +# * Any integer value +# +# Related options: +# * None +# +# (integer value) +# from .glance_store.glance.store.rados_connect_timeout +{{ if not .glance_store.glance.store.rados_connect_timeout }}#{{ end }}rados_connect_timeout = {{ .glance_store.glance.store.rados_connect_timeout | default "0" }} + +# +# Path to the CA bundle file. +# +# This configuration option enables the operator to use a custom +# Certificate Authority file to verify the remote server certificate. If +# this option is set, the ``https_insecure`` option will be ignored and +# the CA file specified will be used to authenticate the server +# certificate and establish a secure connection to the server. +# +# Possible values: +# * A valid path to a CA file +# +# Related options: +# * https_insecure +# +# (string value) +# from .glance_store.glance.store.https_ca_certificates_file +{{ if not .glance_store.glance.store.https_ca_certificates_file }}#{{ end }}https_ca_certificates_file = {{ .glance_store.glance.store.https_ca_certificates_file | default "" }} + +# +# Set verification of the remote server certificate. +# +# This configuration option takes in a boolean value to determine +# whether or not to verify the remote server certificate. If set to +# True, the remote server certificate is not verified. If the option is +# set to False, then the default CA truststore is used for verification. +# +# This option is ignored if ``https_ca_certificates_file`` is set. +# The remote server certificate will then be verified using the file +# specified using the ``https_ca_certificates_file`` option. +# +# Possible values: +# * True +# * False +# +# Related options: +# * https_ca_certificates_file +# +# (boolean value) +# from .glance_store.glance.store.https_insecure +{{ if not .glance_store.glance.store.https_insecure }}#{{ end }}https_insecure = {{ .glance_store.glance.store.https_insecure | default "true" }} + +# +# The http/https proxy information to be used to connect to the remote +# server. +# +# This configuration option specifies the http/https proxy information +# that should be used to connect to the remote server. The proxy +# information should be a key value pair of the scheme and proxy, for +# example, http:10.0.0.1:3128. You can also specify proxies for multiple +# schemes by separating the key value pairs with a comma, for example, +# http:10.0.0.1:3128, https:10.0.0.1:1080. +# +# Possible values: +# * A comma separated list of scheme:proxy pairs as described above +# +# Related options: +# * None +# +# (dict value) +# from .glance_store.glance.store.http_proxy_information +{{ if not .glance_store.glance.store.http_proxy_information }}#{{ end }}http_proxy_information = {{ .glance_store.glance.store.http_proxy_information | default "" }} + +# +# Information to match when looking for cinder in the service catalog. +# +# When the ``cinder_endpoint_template`` is not set and any of +# ``cinder_store_auth_address``, ``cinder_store_user_name``, +# ``cinder_store_project_name``, ``cinder_store_password`` is not set, +# cinder store uses this information to lookup cinder endpoint from the service +# catalog in the current context. ``cinder_os_region_name``, if set, is taken +# into consideration to fetch the appropriate endpoint. +# +# The service catalog can be listed by the ``openstack catalog list`` command. +# +# Possible values: +# * A string of of the following form: +# ``::`` +# At least ``service_type`` and ``endpoint_type`` should be specified. +# ``service_name`` can be omitted. +# +# Related options: +# * cinder_os_region_name +# * cinder_endpoint_template +# * cinder_store_auth_address +# * cinder_store_user_name +# * cinder_store_project_name +# * cinder_store_password +# +# (string value) +# from .glance_store.glance.store.cinder_catalog_info +{{ if not .glance_store.glance.store.cinder_catalog_info }}#{{ end }}cinder_catalog_info = {{ .glance_store.glance.store.cinder_catalog_info | default "volumev2::publicURL" }} + +# +# Override service catalog lookup with template for cinder endpoint. +# +# When this option is set, this value is used to generate cinder endpoint, +# instead of looking up from the service catalog. +# This value is ignored if ``cinder_store_auth_address``, +# ``cinder_store_user_name``, ``cinder_store_project_name``, and +# ``cinder_store_password`` are specified. +# +# If this configuration option is set, ``cinder_catalog_info`` will be ignored. +# +# Possible values: +# * URL template string for cinder endpoint, where ``%%(tenant)s`` is +# replaced with the current tenant (project) name. +# For example: ``http://cinder.openstack.example.org/v2/%%(tenant)s`` +# +# Related options: +# * cinder_store_auth_address +# * cinder_store_user_name +# * cinder_store_project_name +# * cinder_store_password +# * cinder_catalog_info +# +# (string value) +# from .glance_store.glance.store.cinder_endpoint_template +{{ if not .glance_store.glance.store.cinder_endpoint_template }}#{{ end }}cinder_endpoint_template = {{ .glance_store.glance.store.cinder_endpoint_template | default "" }} + +# +# Region name to lookup cinder service from the service catalog. +# +# This is used only when ``cinder_catalog_info`` is used for determining the +# endpoint. If set, the lookup for cinder endpoint by this node is filtered to +# the specified region. It is useful when multiple regions are listed in the +# catalog. If this is not set, the endpoint is looked up from every region. +# +# Possible values: +# * A string that is a valid region name. +# +# Related options: +# * cinder_catalog_info +# +# (string value) +# Deprecated group/name - [glance_store]/os_region_name +# from .glance_store.glance.store.cinder_os_region_name +{{ if not .glance_store.glance.store.cinder_os_region_name }}#{{ end }}cinder_os_region_name = {{ .glance_store.glance.store.cinder_os_region_name | default "" }} + +# +# Location of a CA certificates file used for cinder client requests. +# +# The specified CA certificates file, if set, is used to verify cinder +# connections via HTTPS endpoint. If the endpoint is HTTP, this value is +# ignored. +# ``cinder_api_insecure`` must be set to ``True`` to enable the verification. +# +# Possible values: +# * Path to a ca certificates file +# +# Related options: +# * cinder_api_insecure +# +# (string value) +# from .glance_store.glance.store.cinder_ca_certificates_file +{{ if not .glance_store.glance.store.cinder_ca_certificates_file }}#{{ end }}cinder_ca_certificates_file = {{ .glance_store.glance.store.cinder_ca_certificates_file | default "" }} + +# +# Number of cinderclient retries on failed http calls. +# +# When a call failed by any errors, cinderclient will retry the call up to the +# specified times after sleeping a few seconds. +# +# Possible values: +# * A positive integer +# +# Related options: +# * None +# +# (integer value) +# Minimum value: 0 +# from .glance_store.glance.store.cinder_http_retries +{{ if not .glance_store.glance.store.cinder_http_retries }}#{{ end }}cinder_http_retries = {{ .glance_store.glance.store.cinder_http_retries | default "3" }} + +# +# Time period, in seconds, to wait for a cinder volume transition to +# complete. +# +# When the cinder volume is created, deleted, or attached to the glance node to +# read/write the volume data, the volume's state is changed. For example, the +# newly created volume status changes from ``creating`` to ``available`` after +# the creation process is completed. This specifies the maximum time to wait for +# the status change. If a timeout occurs while waiting, or the status is changed +# to an unexpected value (e.g. `error``), the image creation fails. +# +# Possible values: +# * A positive integer +# +# Related options: +# * None +# +# (integer value) +# Minimum value: 0 +# from .glance_store.glance.store.cinder_state_transition_timeout +{{ if not .glance_store.glance.store.cinder_state_transition_timeout }}#{{ end }}cinder_state_transition_timeout = {{ .glance_store.glance.store.cinder_state_transition_timeout | default "300" }} + +# +# Allow to perform insecure SSL requests to cinder. +# +# If this option is set to True, HTTPS endpoint connection is verified using the +# CA certificates file specified by ``cinder_ca_certificates_file`` option. +# +# Possible values: +# * True +# * False +# +# Related options: +# * cinder_ca_certificates_file +# +# (boolean value) +# from .glance_store.glance.store.cinder_api_insecure +{{ if not .glance_store.glance.store.cinder_api_insecure }}#{{ end }}cinder_api_insecure = {{ .glance_store.glance.store.cinder_api_insecure | default "false" }} + +# +# The address where the cinder authentication service is listening. +# +# When all of ``cinder_store_auth_address``, ``cinder_store_user_name``, +# ``cinder_store_project_name``, and ``cinder_store_password`` options are +# specified, the specified values are always used for the authentication. +# This is useful to hide the image volumes from users by storing them in a +# project/tenant specific to the image service. It also enables users to share +# the image volume among other projects under the control of glance's ACL. +# +# If either of these options are not set, the cinder endpoint is looked up +# from the service catalog, and current context's user and project are used. +# +# Possible values: +# * A valid authentication service address, for example: +# ``http://openstack.example.org/identity/v2.0`` +# +# Related options: +# * cinder_store_user_name +# * cinder_store_password +# * cinder_store_project_name +# +# (string value) +# from .glance_store.glance.store.cinder_store_auth_address +{{ if not .glance_store.glance.store.cinder_store_auth_address }}#{{ end }}cinder_store_auth_address = {{ .glance_store.glance.store.cinder_store_auth_address | default "" }} + +# +# User name to authenticate against cinder. +# +# This must be used with all the following related options. If any of these are +# not specified, the user of the current context is used. +# +# Possible values: +# * A valid user name +# +# Related options: +# * cinder_store_auth_address +# * cinder_store_password +# * cinder_store_project_name +# +# (string value) +# from .glance_store.glance.store.cinder_store_user_name +{{ if not .glance_store.glance.store.cinder_store_user_name }}#{{ end }}cinder_store_user_name = {{ .glance_store.glance.store.cinder_store_user_name | default "" }} + +# +# Password for the user authenticating against cinder. +# +# This must be used with all the following related options. If any of these are +# not specified, the user of the current context is used. +# +# Possible values: +# * A valid password for the user specified by ``cinder_store_user_name`` +# +# Related options: +# * cinder_store_auth_address +# * cinder_store_user_name +# * cinder_store_project_name +# +# (string value) +# from .glance_store.glance.store.cinder_store_password +{{ if not .glance_store.glance.store.cinder_store_password }}#{{ end }}cinder_store_password = {{ .glance_store.glance.store.cinder_store_password | default "" }} + +# +# Project name where the image volume is stored in cinder. +# +# If this configuration option is not set, the project in current context is +# used. +# +# This must be used with all the following related options. If any of these are +# not specified, the project of the current context is used. +# +# Possible values: +# * A valid project name +# +# Related options: +# * ``cinder_store_auth_address`` +# * ``cinder_store_user_name`` +# * ``cinder_store_password`` +# +# (string value) +# from .glance_store.glance.store.cinder_store_project_name +{{ if not .glance_store.glance.store.cinder_store_project_name }}#{{ end }}cinder_store_project_name = {{ .glance_store.glance.store.cinder_store_project_name | default "" }} + +# +# Path to the rootwrap configuration file to use for running commands as root. +# +# The cinder store requires root privileges to operate the image volumes (for +# connecting to iSCSI/FC volumes and reading/writing the volume data, etc.). +# The configuration file should allow the required commands by cinder store and +# os-brick library. +# +# Possible values: +# * Path to the rootwrap config file +# +# Related options: +# * None +# +# (string value) +# from .glance_store.glance.store.rootwrap_config +{{ if not .glance_store.glance.store.rootwrap_config }}#{{ end }}rootwrap_config = {{ .glance_store.glance.store.rootwrap_config | default "/etc/glance/rootwrap.conf" }} + +# +# Address of the ESX/ESXi or vCenter Server target system. +# +# This configuration option sets the address of the ESX/ESXi or vCenter +# Server target system. This option is required when using the VMware +# storage backend. The address can contain an IP address (127.0.0.1) or +# a DNS name (www.my-domain.com). +# +# Possible Values: +# * A valid IPv4 or IPv6 address +# * A valid DNS name +# +# Related options: +# * vmware_server_username +# * vmware_server_password +# +# (string value) +# from .glance_store.glance.store.vmware_server_host +{{ if not .glance_store.glance.store.vmware_server_host }}#{{ end }}vmware_server_host = {{ .glance_store.glance.store.vmware_server_host | default "127.0.0.1" }} + +# +# Server username. +# +# This configuration option takes the username for authenticating with +# the VMware ESX/ESXi or vCenter Server. This option is required when +# using the VMware storage backend. +# +# Possible Values: +# * Any string that is the username for a user with appropriate +# privileges +# +# Related options: +# * vmware_server_host +# * vmware_server_password +# +# (string value) +# from .glance_store.glance.store.vmware_server_username +{{ if not .glance_store.glance.store.vmware_server_username }}#{{ end }}vmware_server_username = {{ .glance_store.glance.store.vmware_server_username | default "root" }} + +# +# Server password. +# +# This configuration option takes the password for authenticating with +# the VMware ESX/ESXi or vCenter Server. This option is required when +# using the VMware storage backend. +# +# Possible Values: +# * Any string that is a password corresponding to the username +# specified using the "vmware_server_username" option +# +# Related options: +# * vmware_server_host +# * vmware_server_username +# +# (string value) +# from .glance_store.glance.store.vmware_server_password +{{ if not .glance_store.glance.store.vmware_server_password }}#{{ end }}vmware_server_password = {{ .glance_store.glance.store.vmware_server_password | default "vmware" }} + +# +# The number of VMware API retries. +# +# This configuration option specifies the number of times the VMware +# ESX/VC server API must be retried upon connection related issues or +# server API call overload. It is not possible to specify 'retry +# forever'. +# +# Possible Values: +# * Any positive integer value +# +# Related options: +# * None +# +# (integer value) +# Minimum value: 1 +# from .glance_store.glance.store.vmware_api_retry_count +{{ if not .glance_store.glance.store.vmware_api_retry_count }}#{{ end }}vmware_api_retry_count = {{ .glance_store.glance.store.vmware_api_retry_count | default "10" }} + +# +# Interval in seconds used for polling remote tasks invoked on VMware +# ESX/VC server. +# +# This configuration option takes in the sleep time in seconds for polling an +# on-going async task as part of the VMWare ESX/VC server API call. +# +# Possible Values: +# * Any positive integer value +# +# Related options: +# * None +# +# (integer value) +# Minimum value: 1 +# from .glance_store.glance.store.vmware_task_poll_interval +{{ if not .glance_store.glance.store.vmware_task_poll_interval }}#{{ end }}vmware_task_poll_interval = {{ .glance_store.glance.store.vmware_task_poll_interval | default "5" }} + +# +# The directory where the glance images will be stored in the datastore. +# +# This configuration option specifies the path to the directory where the +# glance images will be stored in the VMware datastore. If this option +# is not set, the default directory where the glance images are stored +# is openstack_glance. +# +# Possible Values: +# * Any string that is a valid path to a directory +# +# Related options: +# * None +# +# (string value) +# from .glance_store.glance.store.vmware_store_image_dir +{{ if not .glance_store.glance.store.vmware_store_image_dir }}#{{ end }}vmware_store_image_dir = {{ .glance_store.glance.store.vmware_store_image_dir | default "/openstack_glance" }} + +# +# Set verification of the ESX/vCenter server certificate. +# +# This configuration option takes a boolean value to determine +# whether or not to verify the ESX/vCenter server certificate. If this +# option is set to True, the ESX/vCenter server certificate is not +# verified. If this option is set to False, then the default CA +# truststore is used for verification. +# +# This option is ignored if the "vmware_ca_file" option is set. In that +# case, the ESX/vCenter server certificate will then be verified using +# the file specified using the "vmware_ca_file" option . +# +# Possible Values: +# * True +# * False +# +# Related options: +# * vmware_ca_file +# +# (boolean value) +# Deprecated group/name - [glance_store]/vmware_api_insecure +# from .glance_store.glance.store.vmware_insecure +{{ if not .glance_store.glance.store.vmware_insecure }}#{{ end }}vmware_insecure = {{ .glance_store.glance.store.vmware_insecure | default "false" }} + +# +# Absolute path to the CA bundle file. +# +# This configuration option enables the operator to use a custom +# Cerificate Authority File to verify the ESX/vCenter certificate. +# +# If this option is set, the "vmware_insecure" option will be ignored +# and the CA file specified will be used to authenticate the ESX/vCenter +# server certificate and establish a secure connection to the server. +# +# Possible Values: +# * Any string that is a valid absolute path to a CA file +# +# Related options: +# * vmware_insecure +# +# (string value) +# from .glance_store.glance.store.vmware_ca_file +{{ if not .glance_store.glance.store.vmware_ca_file }}#{{ end }}vmware_ca_file = {{ .glance_store.glance.store.vmware_ca_file | default "/etc/ssl/certs/ca-certificates.crt" }} + +# +# The datastores where the image can be stored. +# +# This configuration option specifies the datastores where the image can +# be stored in the VMWare store backend. This option may be specified +# multiple times for specifying multiple datastores. The datastore name +# should be specified after its datacenter path, separated by ":". An +# optional weight may be given after the datastore name, separated again +# by ":" to specify the priority. Thus, the required format becomes +# ::. +# +# When adding an image, the datastore with highest weight will be +# selected, unless there is not enough free space available in cases +# where the image size is already known. If no weight is given, it is +# assumed to be zero and the directory will be considered for selection +# last. If multiple datastores have the same weight, then the one with +# the most free space available is selected. +# +# Possible Values: +# * Any string of the format: +# :: +# +# Related options: +# * None +# +# (multi valued) +# from .glance_store.glance.store.vmware_datastores (multiopt) +{{ if not .glance_store.glance.store.vmware_datastores }}#vmware_datastores = {{ .glance_store.glance.store.vmware_datastores | default "" }}{{ else }}{{ range .glance_store.glance.store.vmware_datastores }}vmware_datastores = {{ . }}{{ end }}{{ end }} + + +[image_format] + +# +# From glance.api +# + +# Supported values for the 'container_format' image attribute (list value) +# Deprecated group/name - [DEFAULT]/container_formats +# from .image_format.glance.api.container_formats +{{ if not .image_format.glance.api.container_formats }}#{{ end }}container_formats = {{ .image_format.glance.api.container_formats | default "ami,ari,aki,bare,ovf,ova,docker" }} + +# Supported values for the 'disk_format' image attribute (list value) +# Deprecated group/name - [DEFAULT]/disk_formats +# from .image_format.glance.api.disk_formats +{{ if not .image_format.glance.api.disk_formats }}#{{ end }}disk_formats = {{ .image_format.glance.api.disk_formats | default "ami,ari,aki,vhd,vhdx,vmdk,raw,qcow2,vdi,iso" }} + + +[keystone_authtoken] + +# FIXME(alanmeadows) - added the next several lines because oslo gen config refuses to generate the line items required in keystonemiddleware +# for authentication - while it does support an "auth_section" parameter to locate these elsewhere, it would be a strange divergence +# from how neutron keystone authentication is stored today - ocata and later appear to use a "service" user section which can house these details +# and does successfully generate beyond newton, so likely this whole section will be removed the next time we generate this file + +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_url }}#{{ end }}auth_url = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_url | default "" }} +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.region_name }}#{{ end }}region_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.region_name | default "" }} +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.project_name }}#{{ end }}project_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.project_name | default "" }} +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.project_domain_name }}#{{ end }}project_domain_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.project_domain_name | default "" }} +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.user_domain_name }}#{{ end }}user_domain_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.user_domain_name | default "" }} +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.username }}#{{ end }}username = {{ .keystone_authtoken.keystonemiddleware.auth_token.username | default "" }} +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.password }}#{{ end }}password = {{ .keystone_authtoken.keystonemiddleware.auth_token.password | default "" }} + +# FIXME(alanmeadows) - added for some newton images using older keystoneauth1 libs but are still "newton" +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_url }}#{{ end }}auth_url = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_url | default "" }} + +# +# From keystonemiddleware.auth_token +# + +# Complete "public" Identity API endpoint. This endpoint should not be an +# "admin" endpoint, as it should be accessible by all end users. Unauthenticated +# clients are redirected to this endpoint to authenticate. Although this +# endpoint should ideally be unversioned, client support in the wild varies. +# If you're using a versioned v2 endpoint here, then this should *not* be the +# same endpoint the service user utilizes for validating tokens, because normal +# end users may not be able to reach that endpoint. (string value) +# from .keystone_authtoken.keystonemiddleware.auth_token.auth_uri +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_uri }}#{{ end }}auth_uri = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_uri | default "" }} + +# API version of the admin Identity API endpoint. (string value) +# from .keystone_authtoken.keystonemiddleware.auth_token.auth_version +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_version }}#{{ end }}auth_version = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_version | default "" }} + +# Do not handle authorization requests within the middleware, but delegate the +# authorization decision to downstream WSGI components. (boolean value) +# from .keystone_authtoken.keystonemiddleware.auth_token.delay_auth_decision +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.delay_auth_decision }}#{{ end }}delay_auth_decision = {{ .keystone_authtoken.keystonemiddleware.auth_token.delay_auth_decision | default "false" }} + +# Request timeout value for communicating with Identity API server. (integer +# value) +# from .keystone_authtoken.keystonemiddleware.auth_token.http_connect_timeout +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.http_connect_timeout }}#{{ end }}http_connect_timeout = {{ .keystone_authtoken.keystonemiddleware.auth_token.http_connect_timeout | default "" }} + +# How many times are we trying to reconnect when communicating with Identity API +# Server. (integer value) +# from .keystone_authtoken.keystonemiddleware.auth_token.http_request_max_retries +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.http_request_max_retries }}#{{ end }}http_request_max_retries = {{ .keystone_authtoken.keystonemiddleware.auth_token.http_request_max_retries | default "3" }} + +# Request environment key where the Swift cache object is stored. When +# auth_token middleware is deployed with a Swift cache, use this option to have +# the middleware share a caching backend with swift. Otherwise, use the +# ``memcached_servers`` option instead. (string value) +# from .keystone_authtoken.keystonemiddleware.auth_token.cache +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.cache }}#{{ end }}cache = {{ .keystone_authtoken.keystonemiddleware.auth_token.cache | default "" }} + +# Required if identity server requires client certificate (string value) +# from .keystone_authtoken.keystonemiddleware.auth_token.certfile +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.certfile }}#{{ end }}certfile = {{ .keystone_authtoken.keystonemiddleware.auth_token.certfile | default "" }} + +# Required if identity server requires client certificate (string value) +# from .keystone_authtoken.keystonemiddleware.auth_token.keyfile +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.keyfile }}#{{ end }}keyfile = {{ .keystone_authtoken.keystonemiddleware.auth_token.keyfile | default "" }} + +# A PEM encoded Certificate Authority to use when verifying HTTPs connections. +# Defaults to system CAs. (string value) +# from .keystone_authtoken.keystonemiddleware.auth_token.cafile +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.cafile }}#{{ end }}cafile = {{ .keystone_authtoken.keystonemiddleware.auth_token.cafile | default "" }} + +# Verify HTTPS connections. (boolean value) +# from .keystone_authtoken.keystonemiddleware.auth_token.insecure +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.insecure }}#{{ end }}insecure = {{ .keystone_authtoken.keystonemiddleware.auth_token.insecure | default "false" }} + +# The region in which the identity server can be found. (string value) +# from .keystone_authtoken.keystonemiddleware.auth_token.region_name +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.region_name }}#{{ end }}region_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.region_name | default "" }} + +# Directory used to cache files related to PKI tokens. (string value) +# from .keystone_authtoken.keystonemiddleware.auth_token.signing_dir +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.signing_dir }}#{{ end }}signing_dir = {{ .keystone_authtoken.keystonemiddleware.auth_token.signing_dir | default "" }} + +# Optionally specify a list of memcached server(s) to use for caching. If left +# undefined, tokens will instead be cached in-process. (list value) +# Deprecated group/name - [keystone_authtoken]/memcache_servers +# from .keystone_authtoken.keystonemiddleware.auth_token.memcached_servers +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcached_servers }}#{{ end }}memcached_servers = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcached_servers | default "" }} + +# In order to prevent excessive effort spent validating tokens, the middleware +# caches previously-seen tokens for a configurable duration (in seconds). Set to +# -1 to disable caching completely. (integer value) +# from .keystone_authtoken.keystonemiddleware.auth_token.token_cache_time +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.token_cache_time }}#{{ end }}token_cache_time = {{ .keystone_authtoken.keystonemiddleware.auth_token.token_cache_time | default "300" }} + +# Determines the frequency at which the list of revoked tokens is retrieved from +# the Identity service (in seconds). A high number of revocation events combined +# with a low cache duration may significantly reduce performance. Only valid for +# PKI tokens. (integer value) +# from .keystone_authtoken.keystonemiddleware.auth_token.revocation_cache_time +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.revocation_cache_time }}#{{ end }}revocation_cache_time = {{ .keystone_authtoken.keystonemiddleware.auth_token.revocation_cache_time | default "10" }} + +# (Optional) If defined, indicate whether token data should be authenticated or +# authenticated and encrypted. If MAC, token data is authenticated (with HMAC) +# in the cache. If ENCRYPT, token data is encrypted and authenticated in the +# cache. If the value is not one of these options or empty, auth_token will +# raise an exception on initialization. (string value) +# Allowed values: None, MAC, ENCRYPT +# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_security_strategy +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_security_strategy }}#{{ end }}memcache_security_strategy = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_security_strategy | default "None" }} + +# (Optional, mandatory if memcache_security_strategy is defined) This string is +# used for key derivation. (string value) +# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_secret_key +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_secret_key }}#{{ end }}memcache_secret_key = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_secret_key | default "" }} + +# (Optional) Number of seconds memcached server is considered dead before it is +# tried again. (integer value) +# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_dead_retry +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_dead_retry }}#{{ end }}memcache_pool_dead_retry = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_dead_retry | default "300" }} + +# (Optional) Maximum total number of open connections to every memcached server. +# (integer value) +# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_maxsize +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_maxsize }}#{{ end }}memcache_pool_maxsize = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_maxsize | default "10" }} + +# (Optional) Socket timeout in seconds for communicating with a memcached +# server. (integer value) +# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_socket_timeout +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_socket_timeout }}#{{ end }}memcache_pool_socket_timeout = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_socket_timeout | default "3" }} + +# (Optional) Number of seconds a connection to memcached is held unused in the +# pool before it is closed. (integer value) +# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_unused_timeout +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_unused_timeout }}#{{ end }}memcache_pool_unused_timeout = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_unused_timeout | default "60" }} + +# (Optional) Number of seconds that an operation will wait to get a memcached +# client connection from the pool. (integer value) +# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_conn_get_timeout +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_conn_get_timeout }}#{{ end }}memcache_pool_conn_get_timeout = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_conn_get_timeout | default "10" }} + +# (Optional) Use the advanced (eventlet safe) memcached client pool. The +# advanced pool will only work under python 2.x. (boolean value) +# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_use_advanced_pool +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_use_advanced_pool }}#{{ end }}memcache_use_advanced_pool = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_use_advanced_pool | default "false" }} + +# (Optional) Indicate whether to set the X-Service-Catalog header. If False, +# middleware will not ask for service catalog on token validation and will not +# set the X-Service-Catalog header. (boolean value) +# from .keystone_authtoken.keystonemiddleware.auth_token.include_service_catalog +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.include_service_catalog }}#{{ end }}include_service_catalog = {{ .keystone_authtoken.keystonemiddleware.auth_token.include_service_catalog | default "true" }} + +# Used to control the use and type of token binding. Can be set to: "disabled" +# to not check token binding. "permissive" (default) to validate binding +# information if the bind type is of a form known to the server and ignore it if +# not. "strict" like "permissive" but if the bind type is unknown the token will +# be rejected. "required" any form of token binding is needed to be allowed. +# Finally the name of a binding method that must be present in tokens. (string +# value) +# from .keystone_authtoken.keystonemiddleware.auth_token.enforce_token_bind +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.enforce_token_bind }}#{{ end }}enforce_token_bind = {{ .keystone_authtoken.keystonemiddleware.auth_token.enforce_token_bind | default "permissive" }} + +# If true, the revocation list will be checked for cached tokens. This requires +# that PKI tokens are configured on the identity server. (boolean value) +# from .keystone_authtoken.keystonemiddleware.auth_token.check_revocations_for_cached +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.check_revocations_for_cached }}#{{ end }}check_revocations_for_cached = {{ .keystone_authtoken.keystonemiddleware.auth_token.check_revocations_for_cached | default "false" }} + +# Hash algorithms to use for hashing PKI tokens. This may be a single algorithm +# or multiple. The algorithms are those supported by Python standard +# hashlib.new(). The hashes will be tried in the order given, so put the +# preferred one first for performance. The result of the first hash will be +# stored in the cache. This will typically be set to multiple values only while +# migrating from a less secure algorithm to a more secure one. Once all the old +# tokens are expired this option should be set to a single value for better +# performance. (list value) +# from .keystone_authtoken.keystonemiddleware.auth_token.hash_algorithms +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.hash_algorithms }}#{{ end }}hash_algorithms = {{ .keystone_authtoken.keystonemiddleware.auth_token.hash_algorithms | default "md5" }} + +# Authentication type to load (string value) +# Deprecated group/name - [keystone_authtoken]/auth_plugin +# from .keystone_authtoken.keystonemiddleware.auth_token.auth_type +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_type }}#{{ end }}auth_type = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_type | default "" }} + +# Config Section from which to load plugin specific options (string value) +# from .keystone_authtoken.keystonemiddleware.auth_token.auth_section +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_section }}#{{ end }}auth_section = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_section | default "" }} + + +[matchmaker_redis] + +# +# From oslo.messaging +# + +# DEPRECATED: Host to locate redis. (string value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Replaced by [DEFAULT]/transport_url +# from .matchmaker_redis.oslo.messaging.host +{{ if not .matchmaker_redis.oslo.messaging.host }}#{{ end }}host = {{ .matchmaker_redis.oslo.messaging.host | default "127.0.0.1" }} + +# DEPRECATED: Use this port to connect to redis host. (port value) +# Minimum value: 0 +# Maximum value: 65535 +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Replaced by [DEFAULT]/transport_url +# from .matchmaker_redis.oslo.messaging.port +{{ if not .matchmaker_redis.oslo.messaging.port }}#{{ end }}port = {{ .matchmaker_redis.oslo.messaging.port | default "6379" }} + +# DEPRECATED: Password for Redis server (optional). (string value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Replaced by [DEFAULT]/transport_url +# from .matchmaker_redis.oslo.messaging.password +{{ if not .matchmaker_redis.oslo.messaging.password }}#{{ end }}password = {{ .matchmaker_redis.oslo.messaging.password | default "" }} + +# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode) e.g. +# [host:port, host1:port ... ] (list value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Replaced by [DEFAULT]/transport_url +# from .matchmaker_redis.oslo.messaging.sentinel_hosts +{{ if not .matchmaker_redis.oslo.messaging.sentinel_hosts }}#{{ end }}sentinel_hosts = {{ .matchmaker_redis.oslo.messaging.sentinel_hosts | default "" }} + +# Redis replica set name. (string value) +# from .matchmaker_redis.oslo.messaging.sentinel_group_name +{{ if not .matchmaker_redis.oslo.messaging.sentinel_group_name }}#{{ end }}sentinel_group_name = {{ .matchmaker_redis.oslo.messaging.sentinel_group_name | default "oslo-messaging-zeromq" }} + +# Time in ms to wait between connection attempts. (integer value) +# from .matchmaker_redis.oslo.messaging.wait_timeout +{{ if not .matchmaker_redis.oslo.messaging.wait_timeout }}#{{ end }}wait_timeout = {{ .matchmaker_redis.oslo.messaging.wait_timeout | default "2000" }} + +# Time in ms to wait before the transaction is killed. (integer value) +# from .matchmaker_redis.oslo.messaging.check_timeout +{{ if not .matchmaker_redis.oslo.messaging.check_timeout }}#{{ end }}check_timeout = {{ .matchmaker_redis.oslo.messaging.check_timeout | default "20000" }} + +# Timeout in ms on blocking socket operations (integer value) +# from .matchmaker_redis.oslo.messaging.socket_timeout +{{ if not .matchmaker_redis.oslo.messaging.socket_timeout }}#{{ end }}socket_timeout = {{ .matchmaker_redis.oslo.messaging.socket_timeout | default "10000" }} + + +[oslo_concurrency] + +# +# From oslo.concurrency +# + +# Enables or disables inter-process locks. (boolean value) +# Deprecated group/name - [DEFAULT]/disable_process_locking +# from .oslo_concurrency.oslo.concurrency.disable_process_locking +{{ if not .oslo_concurrency.oslo.concurrency.disable_process_locking }}#{{ end }}disable_process_locking = {{ .oslo_concurrency.oslo.concurrency.disable_process_locking | default "false" }} + +# Directory to use for lock files. For security, the specified directory should +# only be writable by the user running the processes that need locking. Defaults +# to environment variable OSLO_LOCK_PATH. If external locks are used, a lock +# path must be set. (string value) +# Deprecated group/name - [DEFAULT]/lock_path +# from .oslo_concurrency.oslo.concurrency.lock_path +{{ if not .oslo_concurrency.oslo.concurrency.lock_path }}#{{ end }}lock_path = {{ .oslo_concurrency.oslo.concurrency.lock_path | default "" }} + + +[oslo_messaging_amqp] + +# +# From oslo.messaging +# + +# Name for the AMQP container. must be globally unique. Defaults to a generated +# UUID (string value) +# Deprecated group/name - [amqp1]/container_name +# from .oslo_messaging_amqp.oslo.messaging.container_name +{{ if not .oslo_messaging_amqp.oslo.messaging.container_name }}#{{ end }}container_name = {{ .oslo_messaging_amqp.oslo.messaging.container_name | default "" }} + +# Timeout for inactive connections (in seconds) (integer value) +# Deprecated group/name - [amqp1]/idle_timeout +# from .oslo_messaging_amqp.oslo.messaging.idle_timeout +{{ if not .oslo_messaging_amqp.oslo.messaging.idle_timeout }}#{{ end }}idle_timeout = {{ .oslo_messaging_amqp.oslo.messaging.idle_timeout | default "0" }} + +# Debug: dump AMQP frames to stdout (boolean value) +# Deprecated group/name - [amqp1]/trace +# from .oslo_messaging_amqp.oslo.messaging.trace +{{ if not .oslo_messaging_amqp.oslo.messaging.trace }}#{{ end }}trace = {{ .oslo_messaging_amqp.oslo.messaging.trace | default "false" }} + +# CA certificate PEM file to verify server certificate (string value) +# Deprecated group/name - [amqp1]/ssl_ca_file +# from .oslo_messaging_amqp.oslo.messaging.ssl_ca_file +{{ if not .oslo_messaging_amqp.oslo.messaging.ssl_ca_file }}#{{ end }}ssl_ca_file = {{ .oslo_messaging_amqp.oslo.messaging.ssl_ca_file | default "" }} + +# Identifying certificate PEM file to present to clients (string value) +# Deprecated group/name - [amqp1]/ssl_cert_file +# from .oslo_messaging_amqp.oslo.messaging.ssl_cert_file +{{ if not .oslo_messaging_amqp.oslo.messaging.ssl_cert_file }}#{{ end }}ssl_cert_file = {{ .oslo_messaging_amqp.oslo.messaging.ssl_cert_file | default "" }} + +# Private key PEM file used to sign cert_file certificate (string value) +# Deprecated group/name - [amqp1]/ssl_key_file +# from .oslo_messaging_amqp.oslo.messaging.ssl_key_file +{{ if not .oslo_messaging_amqp.oslo.messaging.ssl_key_file }}#{{ end }}ssl_key_file = {{ .oslo_messaging_amqp.oslo.messaging.ssl_key_file | default "" }} + +# Password for decrypting ssl_key_file (if encrypted) (string value) +# Deprecated group/name - [amqp1]/ssl_key_password +# from .oslo_messaging_amqp.oslo.messaging.ssl_key_password +{{ if not .oslo_messaging_amqp.oslo.messaging.ssl_key_password }}#{{ end }}ssl_key_password = {{ .oslo_messaging_amqp.oslo.messaging.ssl_key_password | default "" }} + +# Accept clients using either SSL or plain TCP (boolean value) +# Deprecated group/name - [amqp1]/allow_insecure_clients +# from .oslo_messaging_amqp.oslo.messaging.allow_insecure_clients +{{ if not .oslo_messaging_amqp.oslo.messaging.allow_insecure_clients }}#{{ end }}allow_insecure_clients = {{ .oslo_messaging_amqp.oslo.messaging.allow_insecure_clients | default "false" }} + +# Space separated list of acceptable SASL mechanisms (string value) +# Deprecated group/name - [amqp1]/sasl_mechanisms +# from .oslo_messaging_amqp.oslo.messaging.sasl_mechanisms +{{ if not .oslo_messaging_amqp.oslo.messaging.sasl_mechanisms }}#{{ end }}sasl_mechanisms = {{ .oslo_messaging_amqp.oslo.messaging.sasl_mechanisms | default "" }} + +# Path to directory that contains the SASL configuration (string value) +# Deprecated group/name - [amqp1]/sasl_config_dir +# from .oslo_messaging_amqp.oslo.messaging.sasl_config_dir +{{ if not .oslo_messaging_amqp.oslo.messaging.sasl_config_dir }}#{{ end }}sasl_config_dir = {{ .oslo_messaging_amqp.oslo.messaging.sasl_config_dir | default "" }} + +# Name of configuration file (without .conf suffix) (string value) +# Deprecated group/name - [amqp1]/sasl_config_name +# from .oslo_messaging_amqp.oslo.messaging.sasl_config_name +{{ if not .oslo_messaging_amqp.oslo.messaging.sasl_config_name }}#{{ end }}sasl_config_name = {{ .oslo_messaging_amqp.oslo.messaging.sasl_config_name | default "" }} + +# User name for message broker authentication (string value) +# Deprecated group/name - [amqp1]/username +# from .oslo_messaging_amqp.oslo.messaging.username +{{ if not .oslo_messaging_amqp.oslo.messaging.username }}#{{ end }}username = {{ .oslo_messaging_amqp.oslo.messaging.username | default "" }} + +# Password for message broker authentication (string value) +# Deprecated group/name - [amqp1]/password +# from .oslo_messaging_amqp.oslo.messaging.password +{{ if not .oslo_messaging_amqp.oslo.messaging.password }}#{{ end }}password = {{ .oslo_messaging_amqp.oslo.messaging.password | default "" }} + +# Seconds to pause before attempting to re-connect. (integer value) +# Minimum value: 1 +# from .oslo_messaging_amqp.oslo.messaging.connection_retry_interval +{{ if not .oslo_messaging_amqp.oslo.messaging.connection_retry_interval }}#{{ end }}connection_retry_interval = {{ .oslo_messaging_amqp.oslo.messaging.connection_retry_interval | default "1" }} + +# Increase the connection_retry_interval by this many seconds after each +# unsuccessful failover attempt. (integer value) +# Minimum value: 0 +# from .oslo_messaging_amqp.oslo.messaging.connection_retry_backoff +{{ if not .oslo_messaging_amqp.oslo.messaging.connection_retry_backoff }}#{{ end }}connection_retry_backoff = {{ .oslo_messaging_amqp.oslo.messaging.connection_retry_backoff | default "2" }} + +# Maximum limit for connection_retry_interval + connection_retry_backoff +# (integer value) +# Minimum value: 1 +# from .oslo_messaging_amqp.oslo.messaging.connection_retry_interval_max +{{ if not .oslo_messaging_amqp.oslo.messaging.connection_retry_interval_max }}#{{ end }}connection_retry_interval_max = {{ .oslo_messaging_amqp.oslo.messaging.connection_retry_interval_max | default "30" }} + +# Time to pause between re-connecting an AMQP 1.0 link that failed due to a +# recoverable error. (integer value) +# Minimum value: 1 +# from .oslo_messaging_amqp.oslo.messaging.link_retry_delay +{{ if not .oslo_messaging_amqp.oslo.messaging.link_retry_delay }}#{{ end }}link_retry_delay = {{ .oslo_messaging_amqp.oslo.messaging.link_retry_delay | default "10" }} + +# The deadline for an rpc reply message delivery. Only used when caller does not +# provide a timeout expiry. (integer value) +# Minimum value: 5 +# from .oslo_messaging_amqp.oslo.messaging.default_reply_timeout +{{ if not .oslo_messaging_amqp.oslo.messaging.default_reply_timeout }}#{{ end }}default_reply_timeout = {{ .oslo_messaging_amqp.oslo.messaging.default_reply_timeout | default "30" }} + +# The deadline for an rpc cast or call message delivery. Only used when caller +# does not provide a timeout expiry. (integer value) +# Minimum value: 5 +# from .oslo_messaging_amqp.oslo.messaging.default_send_timeout +{{ if not .oslo_messaging_amqp.oslo.messaging.default_send_timeout }}#{{ end }}default_send_timeout = {{ .oslo_messaging_amqp.oslo.messaging.default_send_timeout | default "30" }} + +# The deadline for a sent notification message delivery. Only used when caller +# does not provide a timeout expiry. (integer value) +# Minimum value: 5 +# from .oslo_messaging_amqp.oslo.messaging.default_notify_timeout +{{ if not .oslo_messaging_amqp.oslo.messaging.default_notify_timeout }}#{{ end }}default_notify_timeout = {{ .oslo_messaging_amqp.oslo.messaging.default_notify_timeout | default "30" }} + +# Indicates the addressing mode used by the driver. +# Permitted values: +# 'legacy' - use legacy non-routable addressing +# 'routable' - use routable addresses +# 'dynamic' - use legacy addresses if the message bus does not support routing +# otherwise use routable addressing (string value) +# from .oslo_messaging_amqp.oslo.messaging.addressing_mode +{{ if not .oslo_messaging_amqp.oslo.messaging.addressing_mode }}#{{ end }}addressing_mode = {{ .oslo_messaging_amqp.oslo.messaging.addressing_mode | default "dynamic" }} + +# address prefix used when sending to a specific server (string value) +# Deprecated group/name - [amqp1]/server_request_prefix +# from .oslo_messaging_amqp.oslo.messaging.server_request_prefix +{{ if not .oslo_messaging_amqp.oslo.messaging.server_request_prefix }}#{{ end }}server_request_prefix = {{ .oslo_messaging_amqp.oslo.messaging.server_request_prefix | default "exclusive" }} + +# address prefix used when broadcasting to all servers (string value) +# Deprecated group/name - [amqp1]/broadcast_prefix +# from .oslo_messaging_amqp.oslo.messaging.broadcast_prefix +{{ if not .oslo_messaging_amqp.oslo.messaging.broadcast_prefix }}#{{ end }}broadcast_prefix = {{ .oslo_messaging_amqp.oslo.messaging.broadcast_prefix | default "broadcast" }} + +# address prefix when sending to any server in group (string value) +# Deprecated group/name - [amqp1]/group_request_prefix +# from .oslo_messaging_amqp.oslo.messaging.group_request_prefix +{{ if not .oslo_messaging_amqp.oslo.messaging.group_request_prefix }}#{{ end }}group_request_prefix = {{ .oslo_messaging_amqp.oslo.messaging.group_request_prefix | default "unicast" }} + +# Address prefix for all generated RPC addresses (string value) +# from .oslo_messaging_amqp.oslo.messaging.rpc_address_prefix +{{ if not .oslo_messaging_amqp.oslo.messaging.rpc_address_prefix }}#{{ end }}rpc_address_prefix = {{ .oslo_messaging_amqp.oslo.messaging.rpc_address_prefix | default "openstack.org/om/rpc" }} + +# Address prefix for all generated Notification addresses (string value) +# from .oslo_messaging_amqp.oslo.messaging.notify_address_prefix +{{ if not .oslo_messaging_amqp.oslo.messaging.notify_address_prefix }}#{{ end }}notify_address_prefix = {{ .oslo_messaging_amqp.oslo.messaging.notify_address_prefix | default "openstack.org/om/notify" }} + +# Appended to the address prefix when sending a fanout message. Used by the +# message bus to identify fanout messages. (string value) +# from .oslo_messaging_amqp.oslo.messaging.multicast_address +{{ if not .oslo_messaging_amqp.oslo.messaging.multicast_address }}#{{ end }}multicast_address = {{ .oslo_messaging_amqp.oslo.messaging.multicast_address | default "multicast" }} + +# Appended to the address prefix when sending to a particular RPC/Notification +# server. Used by the message bus to identify messages sent to a single +# destination. (string value) +# from .oslo_messaging_amqp.oslo.messaging.unicast_address +{{ if not .oslo_messaging_amqp.oslo.messaging.unicast_address }}#{{ end }}unicast_address = {{ .oslo_messaging_amqp.oslo.messaging.unicast_address | default "unicast" }} + +# Appended to the address prefix when sending to a group of consumers. Used by +# the message bus to identify messages that should be delivered in a round-robin +# fashion across consumers. (string value) +# from .oslo_messaging_amqp.oslo.messaging.anycast_address +{{ if not .oslo_messaging_amqp.oslo.messaging.anycast_address }}#{{ end }}anycast_address = {{ .oslo_messaging_amqp.oslo.messaging.anycast_address | default "anycast" }} + +# Exchange name used in notification addresses. +# Exchange name resolution precedence: +# Target.exchange if set +# else default_notification_exchange if set +# else control_exchange if set +# else 'notify' (string value) +# from .oslo_messaging_amqp.oslo.messaging.default_notification_exchange +{{ if not .oslo_messaging_amqp.oslo.messaging.default_notification_exchange }}#{{ end }}default_notification_exchange = {{ .oslo_messaging_amqp.oslo.messaging.default_notification_exchange | default "" }} + +# Exchange name used in RPC addresses. +# Exchange name resolution precedence: +# Target.exchange if set +# else default_rpc_exchange if set +# else control_exchange if set +# else 'rpc' (string value) +# from .oslo_messaging_amqp.oslo.messaging.default_rpc_exchange +{{ if not .oslo_messaging_amqp.oslo.messaging.default_rpc_exchange }}#{{ end }}default_rpc_exchange = {{ .oslo_messaging_amqp.oslo.messaging.default_rpc_exchange | default "" }} + +# Window size for incoming RPC Reply messages. (integer value) +# Minimum value: 1 +# from .oslo_messaging_amqp.oslo.messaging.reply_link_credit +{{ if not .oslo_messaging_amqp.oslo.messaging.reply_link_credit }}#{{ end }}reply_link_credit = {{ .oslo_messaging_amqp.oslo.messaging.reply_link_credit | default "200" }} + +# Window size for incoming RPC Request messages (integer value) +# Minimum value: 1 +# from .oslo_messaging_amqp.oslo.messaging.rpc_server_credit +{{ if not .oslo_messaging_amqp.oslo.messaging.rpc_server_credit }}#{{ end }}rpc_server_credit = {{ .oslo_messaging_amqp.oslo.messaging.rpc_server_credit | default "100" }} + +# Window size for incoming Notification messages (integer value) +# Minimum value: 1 +# from .oslo_messaging_amqp.oslo.messaging.notify_server_credit +{{ if not .oslo_messaging_amqp.oslo.messaging.notify_server_credit }}#{{ end }}notify_server_credit = {{ .oslo_messaging_amqp.oslo.messaging.notify_server_credit | default "100" }} + + +[oslo_messaging_notifications] + +# +# From oslo.messaging +# + +# The Drivers(s) to handle sending notifications. Possible values are messaging, +# messagingv2, routing, log, test, noop (multi valued) +# Deprecated group/name - [DEFAULT]/notification_driver +# from .oslo_messaging_notifications.oslo.messaging.driver (multiopt) +{{ if not .oslo_messaging_notifications.oslo.messaging.driver }}#driver = {{ .oslo_messaging_notifications.oslo.messaging.driver | default "" }}{{ else }}{{ range .oslo_messaging_notifications.oslo.messaging.driver }}driver = {{ . }}{{ end }}{{ end }} + +# A URL representing the messaging driver to use for notifications. If not set, +# we fall back to the same configuration used for RPC. (string value) +# Deprecated group/name - [DEFAULT]/notification_transport_url +# from .oslo_messaging_notifications.oslo.messaging.transport_url +{{ if not .oslo_messaging_notifications.oslo.messaging.transport_url }}#{{ end }}transport_url = {{ .oslo_messaging_notifications.oslo.messaging.transport_url | default "" }} + +# AMQP topic used for OpenStack notifications. (list value) +# Deprecated group/name - [rpc_notifier2]/topics +# Deprecated group/name - [DEFAULT]/notification_topics +# from .oslo_messaging_notifications.oslo.messaging.topics +{{ if not .oslo_messaging_notifications.oslo.messaging.topics }}#{{ end }}topics = {{ .oslo_messaging_notifications.oslo.messaging.topics | default "notifications" }} + + +[oslo_messaging_rabbit] + +# +# From oslo.messaging +# + +# Use durable queues in AMQP. (boolean value) +# Deprecated group/name - [DEFAULT]/amqp_durable_queues +# Deprecated group/name - [DEFAULT]/rabbit_durable_queues +# from .oslo_messaging_rabbit.oslo.messaging.amqp_durable_queues +{{ if not .oslo_messaging_rabbit.oslo.messaging.amqp_durable_queues }}#{{ end }}amqp_durable_queues = {{ .oslo_messaging_rabbit.oslo.messaging.amqp_durable_queues | default "false" }} + +# Auto-delete queues in AMQP. (boolean value) +# Deprecated group/name - [DEFAULT]/amqp_auto_delete +# from .oslo_messaging_rabbit.oslo.messaging.amqp_auto_delete +{{ if not .oslo_messaging_rabbit.oslo.messaging.amqp_auto_delete }}#{{ end }}amqp_auto_delete = {{ .oslo_messaging_rabbit.oslo.messaging.amqp_auto_delete | default "false" }} + +# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and +# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some +# distributions. (string value) +# Deprecated group/name - [DEFAULT]/kombu_ssl_version +# from .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_version +{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_version }}#{{ end }}kombu_ssl_version = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_version | default "" }} + +# SSL key file (valid only if SSL enabled). (string value) +# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile +# from .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_keyfile +{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_keyfile }}#{{ end }}kombu_ssl_keyfile = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_keyfile | default "" }} + +# SSL cert file (valid only if SSL enabled). (string value) +# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile +# from .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_certfile +{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_certfile }}#{{ end }}kombu_ssl_certfile = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_certfile | default "" }} + +# SSL certification authority file (valid only if SSL enabled). (string value) +# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs +# from .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_ca_certs +{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_ca_certs }}#{{ end }}kombu_ssl_ca_certs = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_ca_certs | default "" }} + +# How long to wait before reconnecting in response to an AMQP consumer cancel +# notification. (floating point value) +# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay +# from .oslo_messaging_rabbit.oslo.messaging.kombu_reconnect_delay +{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_reconnect_delay }}#{{ end }}kombu_reconnect_delay = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_reconnect_delay | default "1.0" }} + +# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not +# be used. This option may not be available in future versions. (string value) +# from .oslo_messaging_rabbit.oslo.messaging.kombu_compression +{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_compression }}#{{ end }}kombu_compression = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_compression | default "" }} + +# How long to wait a missing client before abandoning to send it its replies. +# This value should not be longer than rpc_response_timeout. (integer value) +# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout +# from .oslo_messaging_rabbit.oslo.messaging.kombu_missing_consumer_retry_timeout +{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_missing_consumer_retry_timeout }}#{{ end }}kombu_missing_consumer_retry_timeout = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_missing_consumer_retry_timeout | default "60" }} + +# Determines how the next RabbitMQ node is chosen in case the one we are +# currently connected to becomes unavailable. Takes effect only if more than one +# RabbitMQ node is provided in config. (string value) +# Allowed values: round-robin, shuffle +# from .oslo_messaging_rabbit.oslo.messaging.kombu_failover_strategy +{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_failover_strategy }}#{{ end }}kombu_failover_strategy = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_failover_strategy | default "round-robin" }} + +# DEPRECATED: The RabbitMQ broker address where a single node is used. (string +# value) +# Deprecated group/name - [DEFAULT]/rabbit_host +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Replaced by [DEFAULT]/transport_url +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_host +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_host }}#{{ end }}rabbit_host = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_host | default "localhost" }} + +# DEPRECATED: The RabbitMQ broker port where a single node is used. (port value) +# Minimum value: 0 +# Maximum value: 65535 +# Deprecated group/name - [DEFAULT]/rabbit_port +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Replaced by [DEFAULT]/transport_url +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_port +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_port }}#{{ end }}rabbit_port = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_port | default "5672" }} + +# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value) +# Deprecated group/name - [DEFAULT]/rabbit_hosts +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Replaced by [DEFAULT]/transport_url +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_hosts +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_hosts }}#{{ end }}rabbit_hosts = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_hosts | default "$rabbit_host:$rabbit_port" }} + +# Connect over SSL for RabbitMQ. (boolean value) +# Deprecated group/name - [DEFAULT]/rabbit_use_ssl +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_use_ssl +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_use_ssl }}#{{ end }}rabbit_use_ssl = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_use_ssl | default "false" }} + +# DEPRECATED: The RabbitMQ userid. (string value) +# Deprecated group/name - [DEFAULT]/rabbit_userid +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Replaced by [DEFAULT]/transport_url +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_userid +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_userid }}#{{ end }}rabbit_userid = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_userid | default "guest" }} + +# DEPRECATED: The RabbitMQ password. (string value) +# Deprecated group/name - [DEFAULT]/rabbit_password +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Replaced by [DEFAULT]/transport_url +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_password +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_password }}#{{ end }}rabbit_password = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_password | default "guest" }} + +# The RabbitMQ login method. (string value) +# Deprecated group/name - [DEFAULT]/rabbit_login_method +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_login_method +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_login_method }}#{{ end }}rabbit_login_method = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_login_method | default "AMQPLAIN" }} + +# DEPRECATED: The RabbitMQ virtual host. (string value) +# Deprecated group/name - [DEFAULT]/rabbit_virtual_host +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Replaced by [DEFAULT]/transport_url +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_virtual_host +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_virtual_host }}#{{ end }}rabbit_virtual_host = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_virtual_host | default "/" }} + +# How frequently to retry connecting with RabbitMQ. (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_interval +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_interval }}#{{ end }}rabbit_retry_interval = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_interval | default "1" }} + +# How long to backoff for between retries when connecting to RabbitMQ. (integer +# value) +# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_backoff +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_backoff }}#{{ end }}rabbit_retry_backoff = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_backoff | default "2" }} + +# Maximum interval of RabbitMQ connection retries. Default is 30 seconds. +# (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_interval_max +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_interval_max }}#{{ end }}rabbit_interval_max = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_interval_max | default "30" }} + +# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0 +# (infinite retry count). (integer value) +# Deprecated group/name - [DEFAULT]/rabbit_max_retries +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_max_retries +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_max_retries }}#{{ end }}rabbit_max_retries = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_max_retries | default "0" }} + +# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this +# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring +# is no longer controlled by the x-ha-policy argument when declaring a queue. If +# you just want to make sure that all queues (except those with auto-generated +# names) are mirrored across all nodes, run: "rabbitmqctl set_policy HA +# '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value) +# Deprecated group/name - [DEFAULT]/rabbit_ha_queues +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_ha_queues +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_ha_queues }}#{{ end }}rabbit_ha_queues = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_ha_queues | default "false" }} + +# Positive integer representing duration in seconds for queue TTL (x-expires). +# Queues which are unused for the duration of the TTL are automatically deleted. +# The parameter affects only reply and fanout queues. (integer value) +# Minimum value: 1 +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_transient_queues_ttl +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_transient_queues_ttl }}#{{ end }}rabbit_transient_queues_ttl = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_transient_queues_ttl | default "1800" }} + +# Specifies the number of messages to prefetch. Setting to zero allows unlimited +# messages. (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_qos_prefetch_count +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_qos_prefetch_count }}#{{ end }}rabbit_qos_prefetch_count = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_qos_prefetch_count | default "0" }} + +# Number of seconds after which the Rabbit broker is considered down if +# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer +# value) +# from .oslo_messaging_rabbit.oslo.messaging.heartbeat_timeout_threshold +{{ if not .oslo_messaging_rabbit.oslo.messaging.heartbeat_timeout_threshold }}#{{ end }}heartbeat_timeout_threshold = {{ .oslo_messaging_rabbit.oslo.messaging.heartbeat_timeout_threshold | default "60" }} + +# How often times during the heartbeat_timeout_threshold we check the heartbeat. +# (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.heartbeat_rate +{{ if not .oslo_messaging_rabbit.oslo.messaging.heartbeat_rate }}#{{ end }}heartbeat_rate = {{ .oslo_messaging_rabbit.oslo.messaging.heartbeat_rate | default "2" }} + +# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value) +# Deprecated group/name - [DEFAULT]/fake_rabbit +# from .oslo_messaging_rabbit.oslo.messaging.fake_rabbit +{{ if not .oslo_messaging_rabbit.oslo.messaging.fake_rabbit }}#{{ end }}fake_rabbit = {{ .oslo_messaging_rabbit.oslo.messaging.fake_rabbit | default "false" }} + +# Maximum number of channels to allow (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.channel_max +{{ if not .oslo_messaging_rabbit.oslo.messaging.channel_max }}#{{ end }}channel_max = {{ .oslo_messaging_rabbit.oslo.messaging.channel_max | default "" }} + +# The maximum byte size for an AMQP frame (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.frame_max +{{ if not .oslo_messaging_rabbit.oslo.messaging.frame_max }}#{{ end }}frame_max = {{ .oslo_messaging_rabbit.oslo.messaging.frame_max | default "" }} + +# How often to send heartbeats for consumer's connections (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.heartbeat_interval +{{ if not .oslo_messaging_rabbit.oslo.messaging.heartbeat_interval }}#{{ end }}heartbeat_interval = {{ .oslo_messaging_rabbit.oslo.messaging.heartbeat_interval | default "3" }} + +# Enable SSL (boolean value) +# from .oslo_messaging_rabbit.oslo.messaging.ssl +{{ if not .oslo_messaging_rabbit.oslo.messaging.ssl }}#{{ end }}ssl = {{ .oslo_messaging_rabbit.oslo.messaging.ssl | default "" }} + +# Arguments passed to ssl.wrap_socket (dict value) +# from .oslo_messaging_rabbit.oslo.messaging.ssl_options +{{ if not .oslo_messaging_rabbit.oslo.messaging.ssl_options }}#{{ end }}ssl_options = {{ .oslo_messaging_rabbit.oslo.messaging.ssl_options | default "" }} + +# Set socket timeout in seconds for connection's socket (floating point value) +# from .oslo_messaging_rabbit.oslo.messaging.socket_timeout +{{ if not .oslo_messaging_rabbit.oslo.messaging.socket_timeout }}#{{ end }}socket_timeout = {{ .oslo_messaging_rabbit.oslo.messaging.socket_timeout | default "0.25" }} + +# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point value) +# from .oslo_messaging_rabbit.oslo.messaging.tcp_user_timeout +{{ if not .oslo_messaging_rabbit.oslo.messaging.tcp_user_timeout }}#{{ end }}tcp_user_timeout = {{ .oslo_messaging_rabbit.oslo.messaging.tcp_user_timeout | default "0.25" }} + +# Set delay for reconnection to some host which has connection error (floating +# point value) +# from .oslo_messaging_rabbit.oslo.messaging.host_connection_reconnect_delay +{{ if not .oslo_messaging_rabbit.oslo.messaging.host_connection_reconnect_delay }}#{{ end }}host_connection_reconnect_delay = {{ .oslo_messaging_rabbit.oslo.messaging.host_connection_reconnect_delay | default "0.25" }} + +# Connection factory implementation (string value) +# Allowed values: new, single, read_write +# from .oslo_messaging_rabbit.oslo.messaging.connection_factory +{{ if not .oslo_messaging_rabbit.oslo.messaging.connection_factory }}#{{ end }}connection_factory = {{ .oslo_messaging_rabbit.oslo.messaging.connection_factory | default "single" }} + +# Maximum number of connections to keep queued. (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.pool_max_size +{{ if not .oslo_messaging_rabbit.oslo.messaging.pool_max_size }}#{{ end }}pool_max_size = {{ .oslo_messaging_rabbit.oslo.messaging.pool_max_size | default "30" }} + +# Maximum number of connections to create above `pool_max_size`. (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.pool_max_overflow +{{ if not .oslo_messaging_rabbit.oslo.messaging.pool_max_overflow }}#{{ end }}pool_max_overflow = {{ .oslo_messaging_rabbit.oslo.messaging.pool_max_overflow | default "0" }} + +# Default number of seconds to wait for a connections to available (integer +# value) +# from .oslo_messaging_rabbit.oslo.messaging.pool_timeout +{{ if not .oslo_messaging_rabbit.oslo.messaging.pool_timeout }}#{{ end }}pool_timeout = {{ .oslo_messaging_rabbit.oslo.messaging.pool_timeout | default "30" }} + +# Lifetime of a connection (since creation) in seconds or None for no recycling. +# Expired connections are closed on acquire. (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.pool_recycle +{{ if not .oslo_messaging_rabbit.oslo.messaging.pool_recycle }}#{{ end }}pool_recycle = {{ .oslo_messaging_rabbit.oslo.messaging.pool_recycle | default "600" }} + +# Threshold at which inactive (since release) connections are considered stale +# in seconds or None for no staleness. Stale connections are closed on acquire. +# (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.pool_stale +{{ if not .oslo_messaging_rabbit.oslo.messaging.pool_stale }}#{{ end }}pool_stale = {{ .oslo_messaging_rabbit.oslo.messaging.pool_stale | default "60" }} + +# Persist notification messages. (boolean value) +# from .oslo_messaging_rabbit.oslo.messaging.notification_persistence +{{ if not .oslo_messaging_rabbit.oslo.messaging.notification_persistence }}#{{ end }}notification_persistence = {{ .oslo_messaging_rabbit.oslo.messaging.notification_persistence | default "false" }} + +# Exchange name for sending notifications (string value) +# from .oslo_messaging_rabbit.oslo.messaging.default_notification_exchange +{{ if not .oslo_messaging_rabbit.oslo.messaging.default_notification_exchange }}#{{ end }}default_notification_exchange = {{ .oslo_messaging_rabbit.oslo.messaging.default_notification_exchange | default "${control_exchange}_notification" }} + +# Max number of not acknowledged message which RabbitMQ can send to notification +# listener. (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.notification_listener_prefetch_count +{{ if not .oslo_messaging_rabbit.oslo.messaging.notification_listener_prefetch_count }}#{{ end }}notification_listener_prefetch_count = {{ .oslo_messaging_rabbit.oslo.messaging.notification_listener_prefetch_count | default "100" }} + +# Reconnecting retry count in case of connectivity problem during sending +# notification, -1 means infinite retry. (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.default_notification_retry_attempts +{{ if not .oslo_messaging_rabbit.oslo.messaging.default_notification_retry_attempts }}#{{ end }}default_notification_retry_attempts = {{ .oslo_messaging_rabbit.oslo.messaging.default_notification_retry_attempts | default "-1" }} + +# Reconnecting retry delay in case of connectivity problem during sending +# notification message (floating point value) +# from .oslo_messaging_rabbit.oslo.messaging.notification_retry_delay +{{ if not .oslo_messaging_rabbit.oslo.messaging.notification_retry_delay }}#{{ end }}notification_retry_delay = {{ .oslo_messaging_rabbit.oslo.messaging.notification_retry_delay | default "0.25" }} + +# Time to live for rpc queues without consumers in seconds. (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.rpc_queue_expiration +{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_queue_expiration }}#{{ end }}rpc_queue_expiration = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_queue_expiration | default "60" }} + +# Exchange name for sending RPC messages (string value) +# from .oslo_messaging_rabbit.oslo.messaging.default_rpc_exchange +{{ if not .oslo_messaging_rabbit.oslo.messaging.default_rpc_exchange }}#{{ end }}default_rpc_exchange = {{ .oslo_messaging_rabbit.oslo.messaging.default_rpc_exchange | default "${control_exchange}_rpc" }} + +# Exchange name for receiving RPC replies (string value) +# from .oslo_messaging_rabbit.oslo.messaging.rpc_reply_exchange +{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_reply_exchange }}#{{ end }}rpc_reply_exchange = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_reply_exchange | default "${control_exchange}_rpc_reply" }} + +# Max number of not acknowledged message which RabbitMQ can send to rpc +# listener. (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.rpc_listener_prefetch_count +{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_listener_prefetch_count }}#{{ end }}rpc_listener_prefetch_count = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_listener_prefetch_count | default "100" }} + +# Max number of not acknowledged message which RabbitMQ can send to rpc reply +# listener. (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.rpc_reply_listener_prefetch_count +{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_reply_listener_prefetch_count }}#{{ end }}rpc_reply_listener_prefetch_count = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_reply_listener_prefetch_count | default "100" }} + +# Reconnecting retry count in case of connectivity problem during sending reply. +# -1 means infinite retry during rpc_timeout (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_attempts +{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_attempts }}#{{ end }}rpc_reply_retry_attempts = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_attempts | default "-1" }} + +# Reconnecting retry delay in case of connectivity problem during sending reply. +# (floating point value) +# from .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_delay +{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_delay }}#{{ end }}rpc_reply_retry_delay = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_delay | default "0.25" }} + +# Reconnecting retry count in case of connectivity problem during sending RPC +# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc +# request could be processed more then one time (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.default_rpc_retry_attempts +{{ if not .oslo_messaging_rabbit.oslo.messaging.default_rpc_retry_attempts }}#{{ end }}default_rpc_retry_attempts = {{ .oslo_messaging_rabbit.oslo.messaging.default_rpc_retry_attempts | default "-1" }} + +# Reconnecting retry delay in case of connectivity problem during sending RPC +# message (floating point value) +# from .oslo_messaging_rabbit.oslo.messaging.rpc_retry_delay +{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_retry_delay }}#{{ end }}rpc_retry_delay = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_retry_delay | default "0.25" }} + + +[oslo_messaging_zmq] + +# +# From oslo.messaging +# + +# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. +# The "host" option should point or resolve to this address. (string value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address +# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_address +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_address }}#{{ end }}rpc_zmq_bind_address = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_address | default "*" }} + +# MatchMaker driver. (string value) +# Allowed values: redis, dummy +# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker +# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_matchmaker +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_matchmaker }}#{{ end }}rpc_zmq_matchmaker = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_matchmaker | default "redis" }} + +# Number of ZeroMQ contexts, defaults to 1. (integer value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts +# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_contexts +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_contexts }}#{{ end }}rpc_zmq_contexts = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_contexts | default "1" }} + +# Maximum number of ingress messages to locally buffer per topic. Default is +# unlimited. (integer value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog +# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_topic_backlog +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_topic_backlog }}#{{ end }}rpc_zmq_topic_backlog = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_topic_backlog | default "" }} + +# Directory for holding IPC sockets. (string value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir +# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_ipc_dir +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_ipc_dir }}#{{ end }}rpc_zmq_ipc_dir = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_ipc_dir | default "/var/run/openstack" }} + +# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match +# "host" option, if running Nova. (string value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_host +# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_host +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_host }}#{{ end }}rpc_zmq_host = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_host | default "localhost" }} + +# Seconds to wait before a cast expires (TTL). The default value of -1 specifies +# an infinite linger period. The value of 0 specifies no linger period. Pending +# messages shall be discarded immediately when the socket is closed. Only +# supported by impl_zmq. (integer value) +# Deprecated group/name - [DEFAULT]/rpc_cast_timeout +# from .oslo_messaging_zmq.oslo.messaging.rpc_cast_timeout +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_cast_timeout }}#{{ end }}rpc_cast_timeout = {{ .oslo_messaging_zmq.oslo.messaging.rpc_cast_timeout | default "-1" }} + +# The default number of seconds that poll should wait. Poll raises timeout +# exception when timeout expired. (integer value) +# Deprecated group/name - [DEFAULT]/rpc_poll_timeout +# from .oslo_messaging_zmq.oslo.messaging.rpc_poll_timeout +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_poll_timeout }}#{{ end }}rpc_poll_timeout = {{ .oslo_messaging_zmq.oslo.messaging.rpc_poll_timeout | default "1" }} + +# Expiration timeout in seconds of a name service record about existing target ( +# < 0 means no timeout). (integer value) +# Deprecated group/name - [DEFAULT]/zmq_target_expire +# from .oslo_messaging_zmq.oslo.messaging.zmq_target_expire +{{ if not .oslo_messaging_zmq.oslo.messaging.zmq_target_expire }}#{{ end }}zmq_target_expire = {{ .oslo_messaging_zmq.oslo.messaging.zmq_target_expire | default "300" }} + +# Update period in seconds of a name service record about existing target. +# (integer value) +# Deprecated group/name - [DEFAULT]/zmq_target_update +# from .oslo_messaging_zmq.oslo.messaging.zmq_target_update +{{ if not .oslo_messaging_zmq.oslo.messaging.zmq_target_update }}#{{ end }}zmq_target_update = {{ .oslo_messaging_zmq.oslo.messaging.zmq_target_update | default "180" }} + +# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean +# value) +# Deprecated group/name - [DEFAULT]/use_pub_sub +# from .oslo_messaging_zmq.oslo.messaging.use_pub_sub +{{ if not .oslo_messaging_zmq.oslo.messaging.use_pub_sub }}#{{ end }}use_pub_sub = {{ .oslo_messaging_zmq.oslo.messaging.use_pub_sub | default "true" }} + +# Use ROUTER remote proxy. (boolean value) +# Deprecated group/name - [DEFAULT]/use_router_proxy +# from .oslo_messaging_zmq.oslo.messaging.use_router_proxy +{{ if not .oslo_messaging_zmq.oslo.messaging.use_router_proxy }}#{{ end }}use_router_proxy = {{ .oslo_messaging_zmq.oslo.messaging.use_router_proxy | default "true" }} + +# Minimal port number for random ports range. (port value) +# Minimum value: 0 +# Maximum value: 65535 +# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port +# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_min_port +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_min_port }}#{{ end }}rpc_zmq_min_port = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_min_port | default "49153" }} + +# Maximal port number for random ports range. (integer value) +# Minimum value: 1 +# Maximum value: 65536 +# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port +# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_max_port +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_max_port }}#{{ end }}rpc_zmq_max_port = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_max_port | default "65536" }} + +# Number of retries to find free port number before fail with ZMQBindError. +# (integer value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries +# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_port_retries +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_port_retries }}#{{ end }}rpc_zmq_bind_port_retries = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_port_retries | default "100" }} + +# Default serialization mechanism for serializing/deserializing +# outgoing/incoming messages (string value) +# Allowed values: json, msgpack +# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization +# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_serialization +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_serialization }}#{{ end }}rpc_zmq_serialization = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_serialization | default "json" }} + +# This option configures round-robin mode in zmq socket. True means not keeping +# a queue when server side disconnects. False means to keep queue and messages +# even if server is disconnected, when the server appears we send all +# accumulated messages to it. (boolean value) +# from .oslo_messaging_zmq.oslo.messaging.zmq_immediate +{{ if not .oslo_messaging_zmq.oslo.messaging.zmq_immediate }}#{{ end }}zmq_immediate = {{ .oslo_messaging_zmq.oslo.messaging.zmq_immediate | default "false" }} + + +[oslo_middleware] + +# +# From oslo.middleware.http_proxy_to_wsgi +# + +# Whether the application is behind a proxy or not. This determines if the +# middleware should parse the headers or not. (boolean value) +# from .oslo_middleware.oslo.middleware.http_proxy_to_wsgi.enable_proxy_headers_parsing +{{ if not .oslo_middleware.oslo.middleware.http_proxy_to_wsgi.enable_proxy_headers_parsing }}#{{ end }}enable_proxy_headers_parsing = {{ .oslo_middleware.oslo.middleware.http_proxy_to_wsgi.enable_proxy_headers_parsing | default "false" }} + + +[oslo_policy] + +# +# From oslo.policy +# + +# The JSON file that defines policies. (string value) +# Deprecated group/name - [DEFAULT]/policy_file +# from .oslo_policy.oslo.policy.policy_file +{{ if not .oslo_policy.oslo.policy.policy_file }}#{{ end }}policy_file = {{ .oslo_policy.oslo.policy.policy_file | default "policy.json" }} + +# Default rule. Enforced when a requested rule is not found. (string value) +# Deprecated group/name - [DEFAULT]/policy_default_rule +# from .oslo_policy.oslo.policy.policy_default_rule +{{ if not .oslo_policy.oslo.policy.policy_default_rule }}#{{ end }}policy_default_rule = {{ .oslo_policy.oslo.policy.policy_default_rule | default "default" }} + +# Directories where policy configuration files are stored. They can be relative +# to any directory in the search path defined by the config_dir option, or +# absolute paths. The file defined by policy_file must exist for these +# directories to be searched. Missing or empty directories are ignored. (multi +# valued) +# Deprecated group/name - [DEFAULT]/policy_dirs +# from .oslo_policy.oslo.policy.policy_dirs (multiopt) +{{ if not .oslo_policy.oslo.policy.policy_dirs }}#policy_dirs = {{ .oslo_policy.oslo.policy.policy_dirs | default "policy.d" }}{{ else }}{{ range .oslo_policy.oslo.policy.policy_dirs }}policy_dirs = {{ . }}{{ end }}{{ end }} + + +[paste_deploy] + +# +# From glance.api +# + +# +# Deployment flavor to use in the server application pipeline. +# +# Provide a string value representing the appropriate deployment +# flavor used in the server application pipleline. This is typically +# the partial name of a pipeline in the paste configuration file with +# the service name removed. +# +# For example, if your paste section name in the paste configuration +# file is [pipeline:glance-api-keystone], set ``flavor`` to +# ``keystone``. +# +# Possible values: +# * String value representing a partial pipeline name. +# +# Related Options: +# * config_file +# +# (string value) +# from .paste_deploy.glance.api.flavor +{{ if not .paste_deploy.glance.api.flavor }}#{{ end }}flavor = {{ .paste_deploy.glance.api.flavor | default "keystone" }} + +# +# Name of the paste configuration file. +# +# Provide a string value representing the name of the paste +# configuration file to use for configuring piplelines for +# server application deployments. +# +# NOTES: +# * Provide the name or the path relative to the glance directory +# for the paste configuration file and not the absolute path. +# * The sample paste configuration file shipped with Glance need +# not be edited in most cases as it comes with ready-made +# pipelines for all common deployment flavors. +# +# If no value is specified for this option, the ``paste.ini`` file +# with the prefix of the corresponding Glance service's configuration +# file name will be searched for in the known configuration +# directories. (For example, if this option is missing from or has no +# value set in ``glance-api.conf``, the service will look for a file +# named ``glance-api-paste.ini``.) If the paste configuration file is +# not found, the service will not start. +# +# Possible values: +# * A string value representing the name of the paste configuration +# file. +# +# Related Options: +# * flavor +# +# (string value) +# from .paste_deploy.glance.api.config_file +{{ if not .paste_deploy.glance.api.config_file }}#{{ end }}config_file = {{ .paste_deploy.glance.api.config_file | default "glance-api-paste.ini" }} + + +[profiler] + +# +# From glance.api +# + +# +# Enables the profiling for all services on this node. Default value is False +# (fully disable the profiling feature). +# +# Possible values: +# +# * True: Enables the feature +# * False: Disables the feature. The profiling cannot be started via this +# project +# operations. If the profiling is triggered by another project, this project +# part +# will be empty. +# (boolean value) +# Deprecated group/name - [profiler]/profiler_enabled +# from .profiler.glance.api.enabled +{{ if not .profiler.glance.api.enabled }}#{{ end }}enabled = {{ .profiler.glance.api.enabled | default "false" }} + +# +# Enables SQL requests profiling in services. Default value is False (SQL +# requests won't be traced). +# +# Possible values: +# +# * True: Enables SQL requests profiling. Each SQL query will be part of the +# trace and can the be analyzed by how much time was spent for that. +# * False: Disables SQL requests profiling. The spent time is only shown on a +# higher level of operations. Single SQL queries cannot be analyzed this +# way. +# (boolean value) +# from .profiler.glance.api.trace_sqlalchemy +{{ if not .profiler.glance.api.trace_sqlalchemy }}#{{ end }}trace_sqlalchemy = {{ .profiler.glance.api.trace_sqlalchemy | default "false" }} + +# +# Secret key(s) to use for encrypting context data for performance profiling. +# This string value should have the following format: [,,...], +# where each key is some random string. A user who triggers the profiling via +# the REST API has to set one of these keys in the headers of the REST API call +# to include profiling results of this node for this particular project. +# +# Both "enabled" flag and "hmac_keys" config options should be set to enable +# profiling. Also, to generate correct profiling information across all services +# at least one key needs to be consistent between OpenStack projects. This +# ensures it can be used from client side to generate the trace, containing +# information from all possible resources. (string value) +# from .profiler.glance.api.hmac_keys +{{ if not .profiler.glance.api.hmac_keys }}#{{ end }}hmac_keys = {{ .profiler.glance.api.hmac_keys | default "SECRET_KEY" }} + +# +# Connection string for a notifier backend. Default value is messaging:// which +# sets the notifier to oslo_messaging. +# +# Examples of possible values: +# +# * messaging://: use oslo_messaging driver for sending notifications. +# (string value) +# from .profiler.glance.api.connection_string +{{ if not .profiler.glance.api.connection_string }}#{{ end }}connection_string = {{ .profiler.glance.api.connection_string | default "messaging://" }} + + +[store_type_location_strategy] + +# +# From glance.api +# + +# +# Preference order of storage backends. +# +# Provide a comma separated list of store names in the order in +# which images should be retrieved from storage backends. +# These store names must be registered with the ``stores`` +# configuration option. +# +# NOTE: The ``store_type_preference`` configuration option is applied +# only if ``store_type`` is chosen as a value for the +# ``location_strategy`` configuration option. An empty list will not +# change the location order. +# +# Possible values: +# * Empty list +# * Comma separated list of registered store names. Legal values are: +# * file +# * http +# * rbd +# * swift +# * sheepdog +# * cinder +# * vmware +# +# Related options: +# * location_strategy +# * stores +# +# (list value) +# from .store_type_location_strategy.glance.api.store_type_preference +{{ if not .store_type_location_strategy.glance.api.store_type_preference }}#{{ end }}store_type_preference = {{ .store_type_location_strategy.glance.api.store_type_preference | default "" }} + + +[task] + +# +# From glance.api +# + +# Time in hours for which a task lives after, either succeeding or failing +# (integer value) +# Deprecated group/name - [DEFAULT]/task_time_to_live +# from .task.glance.api.task_time_to_live +{{ if not .task.glance.api.task_time_to_live }}#{{ end }}task_time_to_live = {{ .task.glance.api.task_time_to_live | default "48" }} + +# +# Task executor to be used to run task scripts. +# +# Provide a string value representing the executor to use for task +# executions. By default, ``TaskFlow`` executor is used. +# +# ``TaskFlow`` helps make task executions easy, consistent, scalable +# and reliable. It also enables creation of lightweight task objects +# and/or functions that are combined together into flows in a +# declarative manner. +# +# Possible values: +# * taskflow +# +# Related Options: +# * None +# +# (string value) +# from .task.glance.api.task_executor +{{ if not .task.glance.api.task_executor }}#{{ end }}task_executor = {{ .task.glance.api.task_executor | default "taskflow" }} + +# +# Absolute path to the work directory to use for asynchronous +# task operations. +# +# The directory set here will be used to operate over images - +# normally before they are imported in the destination store. +# +# NOTE: When providing a value for ``work_dir``, please make sure +# that enough space is provided for concurrent tasks to run +# efficiently without running out of space. +# +# A rough estimation can be done by multiplying the number of +# ``max_workers`` with an average image size (e.g 500MB). The image +# size estimation should be done based on the average size in your +# deployment. Note that depending on the tasks running you may need +# to multiply this number by some factor depending on what the task +# does. For example, you may want to double the available size if +# image conversion is enabled. All this being said, remember these +# are just estimations and you should do them based on the worst +# case scenario and be prepared to act in case they were wrong. +# +# Possible values: +# * String value representing the absolute path to the working +# directory +# +# Related Options: +# * None +# +# (string value) +# from .task.glance.api.work_dir +{{ if not .task.glance.api.work_dir }}#{{ end }}work_dir = {{ .task.glance.api.work_dir | default "/work_dir" }} + + +[taskflow_executor] + +# +# From glance.api +# + +# +# Set the taskflow engine mode. +# +# Provide a string type value to set the mode in which the taskflow +# engine would schedule tasks to the workers on the hosts. Based on +# this mode, the engine executes tasks either in single or multiple +# threads. The possible values for this configuration option are: +# ``serial`` and ``parallel``. When set to ``serial``, the engine runs +# all the tasks in a single thread which results in serial execution +# of tasks. Setting this to ``parallel`` makes the engine run tasks in +# multiple threads. This results in parallel execution of tasks. +# +# Possible values: +# * serial +# * parallel +# +# Related options: +# * max_workers +# +# (string value) +# Allowed values: serial, parallel +# from .taskflow_executor.glance.api.engine_mode +{{ if not .taskflow_executor.glance.api.engine_mode }}#{{ end }}engine_mode = {{ .taskflow_executor.glance.api.engine_mode | default "parallel" }} + +# +# Set the number of engine executable tasks. +# +# Provide an integer value to limit the number of workers that can be +# instantiated on the hosts. In other words, this number defines the +# number of parallel tasks that can be executed at the same time by +# the taskflow engine. This value can be greater than one when the +# engine mode is set to parallel. +# +# Possible values: +# * Integer value greater than or equal to 1 +# +# Related options: +# * engine_mode +# +# (integer value) +# Minimum value: 1 +# Deprecated group/name - [task]/eventlet_executor_pool_size +# from .taskflow_executor.glance.api.max_workers +{{ if not .taskflow_executor.glance.api.max_workers }}#{{ end }}max_workers = {{ .taskflow_executor.glance.api.max_workers | default "10" }} + +# +# Set the desired image conversion format. +# +# Provide a valid image format to which you want images to be +# converted before they are stored for consumption by Glance. +# Appropriate image format conversions are desirable for specific +# storage backends in order to facilitate efficient handling of +# bandwidth and usage of the storage infrastructure. +# +# By default, ``conversion_format`` is not set and must be set +# explicitly in the configuration file. +# +# The allowed values for this option are ``raw``, ``qcow2`` and +# ``vmdk``. The ``raw`` format is the unstructured disk format and +# should be chosen when RBD or Ceph storage backends are used for +# image storage. ``qcow2`` is supported by the QEMU emulator that +# expands dynamically and supports Copy on Write. The ``vmdk`` is +# another common disk format supported by many common virtual machine +# monitors like VMWare Workstation. +# +# Possible values: +# * qcow2 +# * raw +# * vmdk +# +# Related options: +# * disk_formats +# +# (string value) +# Allowed values: qcow2, raw, vmdk +# from .taskflow_executor.glance.api.conversion_format +{{ if not .taskflow_executor.glance.api.conversion_format }}#{{ end }}conversion_format = {{ .taskflow_executor.glance.api.conversion_format | default "raw" }} + +{{- end -}} diff --git a/glance/templates/etc/_glance-registry-paste.ini.tpl b/glance/templates/etc/_glance-registry-paste.ini.tpl index 2d145a2512..492dbc6f53 100644 --- a/glance/templates/etc/_glance-registry-paste.ini.tpl +++ b/glance/templates/etc/_glance-registry-paste.ini.tpl @@ -1,17 +1,3 @@ -# Copyright 2017 The Openstack-Helm Authors. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - # Use this pipeline for no auth - DEFAULT [pipeline:glance-registry] pipeline = healthcheck osprofiler unauthenticated-context registryapp diff --git a/glance/templates/etc/_glance-registry.conf.tpl b/glance/templates/etc/_glance-registry.conf.tpl index ae9943dc2e..d9bf36579a 100644 --- a/glance/templates/etc/_glance-registry.conf.tpl +++ b/glance/templates/etc/_glance-registry.conf.tpl @@ -12,31 +12,2322 @@ # See the License for the specific language governing permissions and # limitations under the License. -[DEFAULT] -debug = {{ .Values.misc.debug }} -use_syslog = False -use_stderr = True +{{ include "glance.conf.glance_registry_values_skeleton" .Values.conf.glance_registry | trunc 0 }} +{{ include "glance.conf.glance_registry" .Values.conf.glance_registry }} + + +{{- define "glance.conf.glance_registry_values_skeleton" -}} + +{{- if not .default -}}{{- set . "default" dict -}}{{- end -}} +{{- if not .default.glance -}}{{- set .default "glance" dict -}}{{- end -}} +{{- if not .default.glance.registry -}}{{- set .default.glance "registry" dict -}}{{- end -}} +{{- if not .default.oslo -}}{{- set .default "oslo" dict -}}{{- end -}} +{{- if not .default.oslo.log -}}{{- set .default.oslo "log" dict -}}{{- end -}} +{{- if not .default.oslo.messaging -}}{{- set .default.oslo "messaging" dict -}}{{- end -}} +{{- if not .database -}}{{- set . "database" dict -}}{{- end -}} +{{- if not .database.oslo -}}{{- set .database "oslo" dict -}}{{- end -}} +{{- if not .database.oslo.db -}}{{- set .database.oslo "db" dict -}}{{- end -}} +{{- if not .database.oslo.db.concurrency -}}{{- set .database.oslo.db "concurrency" dict -}}{{- end -}} +{{- if not .keystone_authtoken -}}{{- set . "keystone_authtoken" dict -}}{{- end -}} +{{- if not .keystone_authtoken.keystonemiddleware -}}{{- set .keystone_authtoken "keystonemiddleware" dict -}}{{- end -}} +{{- if not .keystone_authtoken.keystonemiddleware.auth_token -}}{{- set .keystone_authtoken.keystonemiddleware "auth_token" dict -}}{{- end -}} +{{- if not .matchmaker_redis -}}{{- set . "matchmaker_redis" dict -}}{{- end -}} +{{- if not .matchmaker_redis.oslo -}}{{- set .matchmaker_redis "oslo" dict -}}{{- end -}} +{{- if not .matchmaker_redis.oslo.messaging -}}{{- set .matchmaker_redis.oslo "messaging" dict -}}{{- end -}} +{{- if not .oslo_messaging_amqp -}}{{- set . "oslo_messaging_amqp" dict -}}{{- end -}} +{{- if not .oslo_messaging_amqp.oslo -}}{{- set .oslo_messaging_amqp "oslo" dict -}}{{- end -}} +{{- if not .oslo_messaging_amqp.oslo.messaging -}}{{- set .oslo_messaging_amqp.oslo "messaging" dict -}}{{- end -}} +{{- if not .oslo_messaging_notifications -}}{{- set . "oslo_messaging_notifications" dict -}}{{- end -}} +{{- if not .oslo_messaging_notifications.oslo -}}{{- set .oslo_messaging_notifications "oslo" dict -}}{{- end -}} +{{- if not .oslo_messaging_notifications.oslo.messaging -}}{{- set .oslo_messaging_notifications.oslo "messaging" dict -}}{{- end -}} +{{- if not .oslo_messaging_rabbit -}}{{- set . "oslo_messaging_rabbit" dict -}}{{- end -}} +{{- if not .oslo_messaging_rabbit.oslo -}}{{- set .oslo_messaging_rabbit "oslo" dict -}}{{- end -}} +{{- if not .oslo_messaging_rabbit.oslo.messaging -}}{{- set .oslo_messaging_rabbit.oslo "messaging" dict -}}{{- end -}} +{{- if not .oslo_messaging_zmq -}}{{- set . "oslo_messaging_zmq" dict -}}{{- end -}} +{{- if not .oslo_messaging_zmq.oslo -}}{{- set .oslo_messaging_zmq "oslo" dict -}}{{- end -}} +{{- if not .oslo_messaging_zmq.oslo.messaging -}}{{- set .oslo_messaging_zmq.oslo "messaging" dict -}}{{- end -}} +{{- if not .oslo_policy -}}{{- set . "oslo_policy" dict -}}{{- end -}} +{{- if not .oslo_policy.oslo -}}{{- set .oslo_policy "oslo" dict -}}{{- end -}} +{{- if not .oslo_policy.oslo.policy -}}{{- set .oslo_policy.oslo "policy" dict -}}{{- end -}} +{{- if not .paste_deploy -}}{{- set . "paste_deploy" dict -}}{{- end -}} +{{- if not .paste_deploy.glance -}}{{- set .paste_deploy "glance" dict -}}{{- end -}} +{{- if not .paste_deploy.glance.registry -}}{{- set .paste_deploy.glance "registry" dict -}}{{- end -}} +{{- if not .profiler -}}{{- set . "profiler" dict -}}{{- end -}} +{{- if not .profiler.glance -}}{{- set .profiler "glance" dict -}}{{- end -}} +{{- if not .profiler.glance.registry -}}{{- set .profiler.glance "registry" dict -}}{{- end -}} + +{{- end -}} + + +{{- define "glance.conf.glance_registry" -}} + +[DEFAULT] + +# +# From glance.registry +# + +# +# Set the image owner to tenant or the authenticated user. +# +# Assign a boolean value to determine the owner of an image. When set to +# True, the owner of the image is the tenant. When set to False, the +# owner of the image will be the authenticated user issuing the request. +# Setting it to False makes the image private to the associated user and +# sharing with other users within the same tenant (or "project") +# requires explicit image sharing via image membership. +# +# Possible values: +# * True +# * False +# +# Related options: +# * None +# +# (boolean value) +# from .default.glance.registry.owner_is_tenant +{{ if not .default.glance.registry.owner_is_tenant }}#{{ end }}owner_is_tenant = {{ .default.glance.registry.owner_is_tenant | default "true" }} + +# +# Role used to identify an authenticated user as administrator. +# +# Provide a string value representing a Keystone role to identify an +# administrative user. Users with this role will be granted +# administrative privileges. The default value for this option is +# 'admin'. +# +# Possible values: +# * A string value which is a valid Keystone role +# +# Related options: +# * None +# +# (string value) +# from .default.glance.registry.admin_role +{{ if not .default.glance.registry.admin_role }}#{{ end }}admin_role = {{ .default.glance.registry.admin_role | default "admin" }} + +# +# Allow limited access to unauthenticated users. +# +# Assign a boolean to determine API access for unathenticated +# users. When set to False, the API cannot be accessed by +# unauthenticated users. When set to True, unauthenticated users can +# access the API with read-only privileges. This however only applies +# when using ContextMiddleware. +# +# Possible values: +# * True +# * False +# +# Related options: +# * None +# +# (boolean value) +# from .default.glance.registry.allow_anonymous_access +{{ if not .default.glance.registry.allow_anonymous_access }}#{{ end }}allow_anonymous_access = {{ .default.glance.registry.allow_anonymous_access | default "false" }} + +# +# Limit the request ID length. +# +# Provide an integer value to limit the length of the request ID to +# the specified length. The default value is 64. Users can change this +# to any ineteger value between 0 and 16384 however keeping in mind that +# a larger value may flood the logs. +# +# Possible values: +# * Integer value between 0 and 16384 +# +# Related options: +# * None +# +# (integer value) +# Minimum value: 0 +# from .default.glance.registry.max_request_id_length +{{ if not .default.glance.registry.max_request_id_length }}#{{ end }}max_request_id_length = {{ .default.glance.registry.max_request_id_length | default "64" }} + +# +# Allow users to add additional/custom properties to images. +# +# Glance defines a standard set of properties (in its schema) that +# appear on every image. These properties are also known as +# ``base properties``. In addition to these properties, Glance +# allows users to add custom properties to images. These are known +# as ``additional properties``. +# +# By default, this configuration option is set to ``True`` and users +# are allowed to add additional properties. The number of additional +# properties that can be added to an image can be controlled via +# ``image_property_quota`` configuration option. +# +# Possible values: +# * True +# * False +# +# Related options: +# * image_property_quota +# +# (boolean value) +# from .default.glance.registry.allow_additional_image_properties +{{ if not .default.glance.registry.allow_additional_image_properties }}#{{ end }}allow_additional_image_properties = {{ .default.glance.registry.allow_additional_image_properties | default "true" }} + +# +# Maximum number of image members per image. +# +# This limits the maximum of users an image can be shared with. Any negative +# value is interpreted as unlimited. +# +# Related options: +# * None +# +# (integer value) +# from .default.glance.registry.image_member_quota +{{ if not .default.glance.registry.image_member_quota }}#{{ end }}image_member_quota = {{ .default.glance.registry.image_member_quota | default "128" }} + +# +# Maximum number of properties allowed on an image. +# +# This enforces an upper limit on the number of additional properties an image +# can have. Any negative value is interpreted as unlimited. +# +# NOTE: This won't have any impact if additional properties are disabled. Please +# refer to ``allow_additional_image_properties``. +# +# Related options: +# * ``allow_additional_image_properties`` +# +# (integer value) +# from .default.glance.registry.image_property_quota +{{ if not .default.glance.registry.image_property_quota }}#{{ end }}image_property_quota = {{ .default.glance.registry.image_property_quota | default "128" }} + +# +# Maximum number of tags allowed on an image. +# +# Any negative value is interpreted as unlimited. +# +# Related options: +# * None +# +# (integer value) +# from .default.glance.registry.image_tag_quota +{{ if not .default.glance.registry.image_tag_quota }}#{{ end }}image_tag_quota = {{ .default.glance.registry.image_tag_quota | default "128" }} + +# +# Maximum number of locations allowed on an image. +# +# Any negative value is interpreted as unlimited. +# +# Related options: +# * None +# +# (integer value) +# from .default.glance.registry.image_location_quota +{{ if not .default.glance.registry.image_location_quota }}#{{ end }}image_location_quota = {{ .default.glance.registry.image_location_quota | default "10" }} + +# +# Python module path of data access API. +# +# Specifies the path to the API to use for accessing the data model. +# This option determines how the image catalog data will be accessed. +# +# Possible values: +# * glance.db.sqlalchemy.api +# * glance.db.registry.api +# * glance.db.simple.api +# +# If this option is set to ``glance.db.sqlalchemy.api`` then the image +# catalog data is stored in and read from the database via the +# SQLAlchemy Core and ORM APIs. +# +# Setting this option to ``glance.db.registry.api`` will force all +# database access requests to be routed through the Registry service. +# This avoids data access from the Glance API nodes for an added layer +# of security, scalability and manageability. +# +# NOTE: In v2 OpenStack Images API, the registry service is optional. +# In order to use the Registry API in v2, the option +# ``enable_v2_registry`` must be set to ``True``. +# +# Finally, when this configuration option is set to +# ``glance.db.simple.api``, image catalog data is stored in and read +# from an in-memory data structure. This is primarily used for testing. +# +# Related options: +# * enable_v2_api +# * enable_v2_registry +# +# (string value) +# from .default.glance.registry.data_api +{{ if not .default.glance.registry.data_api }}#{{ end }}data_api = {{ .default.glance.registry.data_api | default "glance.db.sqlalchemy.api" }} + +# +# The default number of results to return for a request. +# +# Responses to certain API requests, like list images, may return +# multiple items. The number of results returned can be explicitly +# controlled by specifying the ``limit`` parameter in the API request. +# However, if a ``limit`` parameter is not specified, this +# configuration value will be used as the default number of results to +# be returned for any API request. +# +# NOTES: +# * The value of this configuration option may not be greater than +# the value specified by ``api_limit_max``. +# * Setting this to a very large value may slow down database +# queries and increase response times. Setting this to a +# very low value may result in poor user experience. +# +# Possible values: +# * Any positive integer +# +# Related options: +# * api_limit_max +# +# (integer value) +# Minimum value: 1 +# from .default.glance.registry.limit_param_default +{{ if not .default.glance.registry.limit_param_default }}#{{ end }}limit_param_default = {{ .default.glance.registry.limit_param_default | default "25" }} + +# +# Maximum number of results that could be returned by a request. +# +# As described in the help text of ``limit_param_default``, some +# requests may return multiple results. The number of results to be +# returned are governed either by the ``limit`` parameter in the +# request or the ``limit_param_default`` configuration option. +# The value in either case, can't be greater than the absolute maximum +# defined by this configuration option. Anything greater than this +# value is trimmed down to the maximum value defined here. +# +# NOTE: Setting this to a very large value may slow down database +# queries and increase response times. Setting this to a +# very low value may result in poor user experience. +# +# Possible values: +# * Any positive integer +# +# Related options: +# * limit_param_default +# +# (integer value) +# Minimum value: 1 +# from .default.glance.registry.api_limit_max +{{ if not .default.glance.registry.api_limit_max }}#{{ end }}api_limit_max = {{ .default.glance.registry.api_limit_max | default "1000" }} + +# +# Show direct image location when returning an image. +# +# This configuration option indicates whether to show the direct image +# location when returning image details to the user. The direct image +# location is where the image data is stored in backend storage. This +# image location is shown under the image property ``direct_url``. +# +# When multiple image locations exist for an image, the best location +# is displayed based on the location strategy indicated by the +# configuration option ``location_strategy``. +# +# NOTES: +# * Revealing image locations can present a GRAVE SECURITY RISK as +# image locations can sometimes include credentials. Hence, this +# is set to ``False`` by default. Set this to ``True`` with +# EXTREME CAUTION and ONLY IF you know what you are doing! +# * If an operator wishes to avoid showing any image location(s) +# to the user, then both this option and +# ``show_multiple_locations`` MUST be set to ``False``. +# +# Possible values: +# * True +# * False +# +# Related options: +# * show_multiple_locations +# * location_strategy +# +# (boolean value) +# from .default.glance.registry.show_image_direct_url +{{ if not .default.glance.registry.show_image_direct_url }}#{{ end }}show_image_direct_url = {{ .default.glance.registry.show_image_direct_url | default "false" }} + +# DEPRECATED: +# Show all image locations when returning an image. +# +# This configuration option indicates whether to show all the image +# locations when returning image details to the user. When multiple +# image locations exist for an image, the locations are ordered based +# on the location strategy indicated by the configuration opt +# ``location_strategy``. The image locations are shown under the +# image property ``locations``. +# +# NOTES: +# * Revealing image locations can present a GRAVE SECURITY RISK as +# image locations can sometimes include credentials. Hence, this +# is set to ``False`` by default. Set this to ``True`` with +# EXTREME CAUTION and ONLY IF you know what you are doing! +# * If an operator wishes to avoid showing any image location(s) +# to the user, then both this option and +# ``show_image_direct_url`` MUST be set to ``False``. +# +# Possible values: +# * True +# * False +# +# Related options: +# * show_image_direct_url +# * location_strategy +# +# (boolean value) +# This option is deprecated for removal since Newton. +# Its value may be silently ignored in the future. +# Reason: This option will be removed in the Ocata release because the same +# functionality can be achieved with greater granularity by using policies. +# Please see the Newton release notes for more information. +# from .default.glance.registry.show_multiple_locations +{{ if not .default.glance.registry.show_multiple_locations }}#{{ end }}show_multiple_locations = {{ .default.glance.registry.show_multiple_locations | default "false" }} + +# +# Maximum size of image a user can upload in bytes. +# +# An image upload greater than the size mentioned here would result +# in an image creation failure. This configuration option defaults to +# 1099511627776 bytes (1 TiB). +# +# NOTES: +# * This value should only be increased after careful +# consideration and must be set less than or equal to +# 8 EiB (9223372036854775808). +# * This value must be set with careful consideration of the +# backend storage capacity. Setting this to a very low value +# may result in a large number of image failures. And, setting +# this to a very large value may result in faster consumption +# of storage. Hence, this must be set according to the nature of +# images created and storage capacity available. +# +# Possible values: +# * Any positive number less than or equal to 9223372036854775808 +# +# (integer value) +# Minimum value: 1 +# Maximum value: 9223372036854775808 +# from .default.glance.registry.image_size_cap +{{ if not .default.glance.registry.image_size_cap }}#{{ end }}image_size_cap = {{ .default.glance.registry.image_size_cap | default "1099511627776" }} + +# +# Maximum amount of image storage per tenant. +# +# This enforces an upper limit on the cumulative storage consumed by all images +# of a tenant across all stores. This is a per-tenant limit. +# +# The default unit for this configuration option is Bytes. However, storage +# units can be specified using case-sensitive literals ``B``, ``KB``, ``MB``, +# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes, GigaBytes and +# TeraBytes respectively. Note that there should not be any space between the +# value and unit. Value ``0`` signifies no quota enforcement. Negative values +# are invalid and result in errors. +# +# Possible values: +# * A string that is a valid concatenation of a non-negative integer +# representing the storage value and an optional string literal +# representing storage units as mentioned above. +# +# Related options: +# * None +# +# (string value) +# from .default.glance.registry.user_storage_quota +{{ if not .default.glance.registry.user_storage_quota }}#{{ end }}user_storage_quota = {{ .default.glance.registry.user_storage_quota | default "0" }} + +# +# Deploy the v1 OpenStack Images API. +# +# When this option is set to ``True``, Glance service will respond to +# requests on registered endpoints conforming to the v1 OpenStack +# Images API. +# +# NOTES: +# * If this option is enabled, then ``enable_v1_registry`` must +# also be set to ``True`` to enable mandatory usage of Registry +# service with v1 API. +# +# * If this option is disabled, then the ``enable_v1_registry`` +# option, which is enabled by default, is also recommended +# to be disabled. +# +# * This option is separate from ``enable_v2_api``, both v1 and v2 +# OpenStack Images API can be deployed independent of each +# other. +# +# * If deploying only the v2 Images API, this option, which is +# enabled by default, should be disabled. +# +# Possible values: +# * True +# * False +# +# Related options: +# * enable_v1_registry +# * enable_v2_api +# +# (boolean value) +# from .default.glance.registry.enable_v1_api +{{ if not .default.glance.registry.enable_v1_api }}#{{ end }}enable_v1_api = {{ .default.glance.registry.enable_v1_api | default "true" }} + +# +# Deploy the v2 OpenStack Images API. +# +# When this option is set to ``True``, Glance service will respond +# to requests on registered endpoints conforming to the v2 OpenStack +# Images API. +# +# NOTES: +# * If this option is disabled, then the ``enable_v2_registry`` +# option, which is enabled by default, is also recommended +# to be disabled. +# +# * This option is separate from ``enable_v1_api``, both v1 and v2 +# OpenStack Images API can be deployed independent of each +# other. +# +# * If deploying only the v1 Images API, this option, which is +# enabled by default, should be disabled. +# +# Possible values: +# * True +# * False +# +# Related options: +# * enable_v2_registry +# * enable_v1_api +# +# (boolean value) +# from .default.glance.registry.enable_v2_api +{{ if not .default.glance.registry.enable_v2_api }}#{{ end }}enable_v2_api = {{ .default.glance.registry.enable_v2_api | default "true" }} + +# +# Deploy the v1 API Registry service. +# +# When this option is set to ``True``, the Registry service +# will be enabled in Glance for v1 API requests. +# +# NOTES: +# * Use of Registry is mandatory in v1 API, so this option must +# be set to ``True`` if the ``enable_v1_api`` option is enabled. +# +# * If deploying only the v2 OpenStack Images API, this option, +# which is enabled by default, should be disabled. +# +# Possible values: +# * True +# * False +# +# Related options: +# * enable_v1_api +# +# (boolean value) +# from .default.glance.registry.enable_v1_registry +{{ if not .default.glance.registry.enable_v1_registry }}#{{ end }}enable_v1_registry = {{ .default.glance.registry.enable_v1_registry | default "true" }} + +# +# Deploy the v2 API Registry service. +# +# When this option is set to ``True``, the Registry service +# will be enabled in Glance for v2 API requests. +# +# NOTES: +# * Use of Registry is optional in v2 API, so this option +# must only be enabled if both ``enable_v2_api`` is set to +# ``True`` and the ``data_api`` option is set to +# ``glance.db.registry.api``. +# +# * If deploying only the v1 OpenStack Images API, this option, +# which is enabled by default, should be disabled. +# +# Possible values: +# * True +# * False +# +# Related options: +# * enable_v2_api +# * data_api +# +# (boolean value) +# from .default.glance.registry.enable_v2_registry +{{ if not .default.glance.registry.enable_v2_registry }}#{{ end }}enable_v2_registry = {{ .default.glance.registry.enable_v2_registry | default "true" }} + +# +# Host address of the pydev server. +# +# Provide a string value representing the hostname or IP of the +# pydev server to use for debugging. The pydev server listens for +# debug connections on this address, facilitating remote debugging +# in Glance. +# +# Possible values: +# * Valid hostname +# * Valid IP address +# +# Related options: +# * None +# +# (string value) +# from .default.glance.registry.pydev_worker_debug_host +{{ if not .default.glance.registry.pydev_worker_debug_host }}#{{ end }}pydev_worker_debug_host = {{ .default.glance.registry.pydev_worker_debug_host | default "localhost" }} + +# +# Port number that the pydev server will listen on. +# +# Provide a port number to bind the pydev server to. The pydev +# process accepts debug connections on this port and facilitates +# remote debugging in Glance. +# +# Possible values: +# * A valid port number +# +# Related options: +# * None +# +# (port value) +# Minimum value: 0 +# Maximum value: 65535 +# from .default.glance.registry.pydev_worker_debug_port +{{ if not .default.glance.registry.pydev_worker_debug_port }}#{{ end }}pydev_worker_debug_port = {{ .default.glance.registry.pydev_worker_debug_port | default "5678" }} + +# +# AES key for encrypting store location metadata. +# +# Provide a string value representing the AES cipher to use for +# encrypting Glance store metadata. +# +# NOTE: The AES key to use must be set to a random string of length +# 16, 24 or 32 bytes. +# +# Possible values: +# * String value representing a valid AES key +# +# Related options: +# * None +# +# (string value) +# from .default.glance.registry.metadata_encryption_key +{{ if not .default.glance.registry.metadata_encryption_key }}#{{ end }}metadata_encryption_key = {{ .default.glance.registry.metadata_encryption_key | default "" }} + +# +# Digest algorithm to use for digital signature. +# +# Provide a string value representing the digest algorithm to +# use for generating digital signatures. By default, ``sha256`` +# is used. +# +# To get a list of the available algorithms supported by the version +# of OpenSSL on your platform, run the command: +# ``openssl list-message-digest-algorithms``. +# Examples are 'sha1', 'sha256', and 'sha512'. +# +# NOTE: ``digest_algorithm`` is not related to Glance's image signing +# and verification. It is only used to sign the universally unique +# identifier (UUID) as a part of the certificate file and key file +# validation. +# +# Possible values: +# * An OpenSSL message digest algorithm identifier +# +# Relation options: +# * None +# +# (string value) +# from .default.glance.registry.digest_algorithm +{{ if not .default.glance.registry.digest_algorithm }}#{{ end }}digest_algorithm = {{ .default.glance.registry.digest_algorithm | default "sha256" }} + +# +# IP address to bind the glance servers to. +# +# Provide an IP address to bind the glance server to. The default +# value is ``0.0.0.0``. +# +# Edit this option to enable the server to listen on one particular +# IP address on the network card. This facilitates selection of a +# particular network interface for the server. +# +# Possible values: +# * A valid IPv4 address +# * A valid IPv6 address +# +# Related options: +# * None +# +# (string value) +# from .default.glance.registry.bind_host +{{ if not .default.glance.registry.bind_host }}#{{ end }}bind_host = {{ .default.glance.registry.bind_host | default "0.0.0.0" }} + +# +# Port number on which the server will listen. +# +# Provide a valid port number to bind the server's socket to. This +# port is then set to identify processes and forward network messages +# that arrive at the server. The default bind_port value for the API +# server is 9292 and for the registry server is 9191. +# +# Possible values: +# * A valid port number (0 to 65535) +# +# Related options: +# * None +# +# (port value) +# Minimum value: 0 +# Maximum value: 65535 +# from .default.glance.registry.bind_port +{{ if not .default.glance.registry.bind_port }}#{{ end }}bind_port = {{ .default.glance.registry.bind_port | default "" }} + +# +# Set the number of incoming connection requests. +# +# Provide a positive integer value to limit the number of requests in +# the backlog queue. The default queue size is 4096. +# +# An incoming connection to a TCP listener socket is queued before a +# connection can be established with the server. Setting the backlog +# for a TCP socket ensures a limited queue size for incoming traffic. +# +# Possible values: +# * Positive integer +# +# Related options: +# * None +# +# (integer value) +# Minimum value: 1 +# from .default.glance.registry.backlog +{{ if not .default.glance.registry.backlog }}#{{ end }}backlog = {{ .default.glance.registry.backlog | default "4096" }} + +# +# Set the wait time before a connection recheck. +# +# Provide a positive integer value representing time in seconds which +# is set as the idle wait time before a TCP keep alive packet can be +# sent to the host. The default value is 600 seconds. +# +# Setting ``tcp_keepidle`` helps verify at regular intervals that a +# connection is intact and prevents frequent TCP connection +# reestablishment. +# +# Possible values: +# * Positive integer value representing time in seconds +# +# Related options: +# * None +# +# (integer value) +# Minimum value: 1 +# from .default.glance.registry.tcp_keepidle +{{ if not .default.glance.registry.tcp_keepidle }}#{{ end }}tcp_keepidle = {{ .default.glance.registry.tcp_keepidle | default "600" }} + +# +# Absolute path to the CA file. +# +# Provide a string value representing a valid absolute path to +# the Certificate Authority file to use for client authentication. +# +# A CA file typically contains necessary trusted certificates to +# use for the client authentication. This is essential to ensure +# that a secure connection is established to the server via the +# internet. +# +# Possible values: +# * Valid absolute path to the CA file +# +# Related options: +# * None +# +# (string value) +# from .default.glance.registry.ca_file +{{ if not .default.glance.registry.ca_file }}#{{ end }}ca_file = {{ .default.glance.registry.ca_file | default "/etc/ssl/cafile" }} + +# +# Absolute path to the certificate file. +# +# Provide a string value representing a valid absolute path to the +# certificate file which is required to start the API service +# securely. +# +# A certificate file typically is a public key container and includes +# the server's public key, server name, server information and the +# signature which was a result of the verification process using the +# CA certificate. This is required for a secure connection +# establishment. +# +# Possible values: +# * Valid absolute path to the certificate file +# +# Related options: +# * None +# +# (string value) +# from .default.glance.registry.cert_file +{{ if not .default.glance.registry.cert_file }}#{{ end }}cert_file = {{ .default.glance.registry.cert_file | default "/etc/ssl/certs" }} + +# +# Absolute path to a private key file. +# +# Provide a string value representing a valid absolute path to a +# private key file which is required to establish the client-server +# connection. +# +# Possible values: +# * Absolute path to the private key file +# +# Related options: +# * None +# +# (string value) +# from .default.glance.registry.key_file +{{ if not .default.glance.registry.key_file }}#{{ end }}key_file = {{ .default.glance.registry.key_file | default "/etc/ssl/key/key-file.pem" }} + +# DEPRECATED: The HTTP header used to determine the scheme for the original +# request, even if it was removed by an SSL terminating proxy. Typical value is +# "HTTP_X_FORWARDED_PROTO". (string value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Use the http_proxy_to_wsgi middleware instead. +# from .default.glance.registry.secure_proxy_ssl_header +{{ if not .default.glance.registry.secure_proxy_ssl_header }}#{{ end }}secure_proxy_ssl_header = {{ .default.glance.registry.secure_proxy_ssl_header | default "" }} + +# +# Number of Glance worker processes to start. +# +# Provide a non-negative integer value to set the number of child +# process workers to service requests. By default, the number of CPUs +# available is set as the value for ``workers``. +# +# Each worker process is made to listen on the port set in the +# configuration file and contains a greenthread pool of size 1000. +# +# NOTE: Setting the number of workers to zero, triggers the creation +# of a single API process with a greenthread pool of size 1000. +# +# Possible values: +# * 0 +# * Positive integer value (typically equal to the number of CPUs) +# +# Related options: +# * None +# +# (integer value) +# Minimum value: 0 +# from .default.glance.registry.workers +{{ if not .default.glance.registry.workers }}#{{ end }}workers = {{ .default.glance.registry.workers | default "" }} + +# +# Maximum line size of message headers. +# +# Provide an integer value representing a length to limit the size of +# message headers. The default value is 16384. +# +# NOTE: ``max_header_line`` may need to be increased when using large +# tokens (typically those generated by the Keystone v3 API with big +# service catalogs). However, it is to be kept in mind that larger +# values for ``max_header_line`` would flood the logs. +# +# Setting ``max_header_line`` to 0 sets no limit for the line size of +# message headers. +# +# Possible values: +# * 0 +# * Positive integer +# +# Related options: +# * None +# +# (integer value) +# Minimum value: 0 +# from .default.glance.registry.max_header_line +{{ if not .default.glance.registry.max_header_line }}#{{ end }}max_header_line = {{ .default.glance.registry.max_header_line | default "16384" }} + +# +# Set keep alive option for HTTP over TCP. +# +# Provide a boolean value to determine sending of keep alive packets. +# If set to ``False``, the server returns the header +# "Connection: close". If set to ``True``, the server returns a +# "Connection: Keep-Alive" in its responses. This enables retention of +# the same TCP connection for HTTP conversations instead of opening a +# new one with each new request. +# +# This option must be set to ``False`` if the client socket connection +# needs to be closed explicitly after the response is received and +# read successfully by the client. +# +# Possible values: +# * True +# * False +# +# Related options: +# * None +# +# (boolean value) +# from .default.glance.registry.http_keepalive +{{ if not .default.glance.registry.http_keepalive }}#{{ end }}http_keepalive = {{ .default.glance.registry.http_keepalive | default "true" }} + +# +# Timeout for client connections' socket operations. +# +# Provide a valid integer value representing time in seconds to set +# the period of wait before an incoming connection can be closed. The +# default value is 900 seconds. +# +# The value zero implies wait forever. +# +# Possible values: +# * Zero +# * Positive integer +# +# Related options: +# * None +# +# (integer value) +# Minimum value: 0 +# from .default.glance.registry.client_socket_timeout +{{ if not .default.glance.registry.client_socket_timeout }}#{{ end }}client_socket_timeout = {{ .default.glance.registry.client_socket_timeout | default "900" }} + +# +# From oslo.log +# + +# If set to true, the logging level will be set to DEBUG instead of the default +# INFO level. (boolean value) +# Note: This option can be changed without restarting. +# from .default.oslo.log.debug +{{ if not .default.oslo.log.debug }}#{{ end }}debug = {{ .default.oslo.log.debug | default "false" }} + +# DEPRECATED: If set to false, the logging level will be set to WARNING instead +# of the default INFO level. (boolean value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# from .default.oslo.log.verbose +{{ if not .default.oslo.log.verbose }}#{{ end }}verbose = {{ .default.oslo.log.verbose | default "true" }} + +# The name of a logging configuration file. This file is appended to any +# existing logging configuration files. For details about logging configuration +# files, see the Python logging module documentation. Note that when logging +# configuration files are used then all logging configuration is set in the +# configuration file and other logging configuration options are ignored (for +# example, logging_context_format_string). (string value) +# Note: This option can be changed without restarting. +# Deprecated group/name - [DEFAULT]/log_config +# from .default.oslo.log.log_config_append +{{ if not .default.oslo.log.log_config_append }}#{{ end }}log_config_append = {{ .default.oslo.log.log_config_append | default "" }} + +# Defines the format string for %%(asctime)s in log records. Default: +# %(default)s . This option is ignored if log_config_append is set. (string +# value) +# from .default.oslo.log.log_date_format +{{ if not .default.oslo.log.log_date_format }}#{{ end }}log_date_format = {{ .default.oslo.log.log_date_format | default "%Y-%m-%d %H:%M:%S" }} + +# (Optional) Name of log file to send logging output to. If no default is set, +# logging will go to stderr as defined by use_stderr. This option is ignored if +# log_config_append is set. (string value) +# Deprecated group/name - [DEFAULT]/logfile +# from .default.oslo.log.log_file +{{ if not .default.oslo.log.log_file }}#{{ end }}log_file = {{ .default.oslo.log.log_file | default "" }} + +# (Optional) The base directory used for relative log_file paths. This option +# is ignored if log_config_append is set. (string value) +# Deprecated group/name - [DEFAULT]/logdir +# from .default.oslo.log.log_dir +{{ if not .default.oslo.log.log_dir }}#{{ end }}log_dir = {{ .default.oslo.log.log_dir | default "" }} + +# Uses logging handler designed to watch file system. When log file is moved or +# removed this handler will open a new log file with specified path +# instantaneously. It makes sense only if log_file option is specified and Linux +# platform is used. This option is ignored if log_config_append is set. (boolean +# value) +# from .default.oslo.log.watch_log_file +{{ if not .default.oslo.log.watch_log_file }}#{{ end }}watch_log_file = {{ .default.oslo.log.watch_log_file | default "false" }} + +# Use syslog for logging. Existing syslog format is DEPRECATED and will be +# changed later to honor RFC5424. This option is ignored if log_config_append is +# set. (boolean value) +# from .default.oslo.log.use_syslog +{{ if not .default.oslo.log.use_syslog }}#{{ end }}use_syslog = {{ .default.oslo.log.use_syslog | default "false" }} + +# Syslog facility to receive log lines. This option is ignored if +# log_config_append is set. (string value) +# from .default.oslo.log.syslog_log_facility +{{ if not .default.oslo.log.syslog_log_facility }}#{{ end }}syslog_log_facility = {{ .default.oslo.log.syslog_log_facility | default "LOG_USER" }} + +# Log output to standard error. This option is ignored if log_config_append is +# set. (boolean value) +# from .default.oslo.log.use_stderr +{{ if not .default.oslo.log.use_stderr }}#{{ end }}use_stderr = {{ .default.oslo.log.use_stderr | default "true" }} + +# Format string to use for log messages with context. (string value) +# from .default.oslo.log.logging_context_format_string +{{ if not .default.oslo.log.logging_context_format_string }}#{{ end }}logging_context_format_string = {{ .default.oslo.log.logging_context_format_string | default "%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s" }} + +# Format string to use for log messages when context is undefined. (string +# value) +# from .default.oslo.log.logging_default_format_string +{{ if not .default.oslo.log.logging_default_format_string }}#{{ end }}logging_default_format_string = {{ .default.oslo.log.logging_default_format_string | default "%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s" }} + +# Additional data to append to log message when logging level for the message is +# DEBUG. (string value) +# from .default.oslo.log.logging_debug_format_suffix +{{ if not .default.oslo.log.logging_debug_format_suffix }}#{{ end }}logging_debug_format_suffix = {{ .default.oslo.log.logging_debug_format_suffix | default "%(funcName)s %(pathname)s:%(lineno)d" }} + +# Prefix each line of exception output with this format. (string value) +# from .default.oslo.log.logging_exception_prefix +{{ if not .default.oslo.log.logging_exception_prefix }}#{{ end }}logging_exception_prefix = {{ .default.oslo.log.logging_exception_prefix | default "%(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s" }} + +# Defines the format string for %(user_identity)s that is used in +# logging_context_format_string. (string value) +# from .default.oslo.log.logging_user_identity_format +{{ if not .default.oslo.log.logging_user_identity_format }}#{{ end }}logging_user_identity_format = {{ .default.oslo.log.logging_user_identity_format | default "%(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s" }} + +# List of package logging levels in logger=LEVEL pairs. This option is ignored +# if log_config_append is set. (list value) +# from .default.oslo.log.default_log_levels +{{ if not .default.oslo.log.default_log_levels }}#{{ end }}default_log_levels = {{ .default.oslo.log.default_log_levels | default "amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO" }} + +# Enables or disables publication of error events. (boolean value) +# from .default.oslo.log.publish_errors +{{ if not .default.oslo.log.publish_errors }}#{{ end }}publish_errors = {{ .default.oslo.log.publish_errors | default "false" }} + +# The format for an instance that is passed with the log message. (string value) +# from .default.oslo.log.instance_format +{{ if not .default.oslo.log.instance_format }}#{{ end }}instance_format = {{ .default.oslo.log.instance_format | default "\"[instance: %(uuid)s] \"" }} + +# The format for an instance UUID that is passed with the log message. (string +# value) +# from .default.oslo.log.instance_uuid_format +{{ if not .default.oslo.log.instance_uuid_format }}#{{ end }}instance_uuid_format = {{ .default.oslo.log.instance_uuid_format | default "\"[instance: %(uuid)s] \"" }} + +# Enables or disables fatal status of deprecations. (boolean value) +# from .default.oslo.log.fatal_deprecations +{{ if not .default.oslo.log.fatal_deprecations }}#{{ end }}fatal_deprecations = {{ .default.oslo.log.fatal_deprecations | default "false" }} + +# +# From oslo.messaging +# + +# Size of RPC connection pool. (integer value) +# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size +# from .default.oslo.messaging.rpc_conn_pool_size +{{ if not .default.oslo.messaging.rpc_conn_pool_size }}#{{ end }}rpc_conn_pool_size = {{ .default.oslo.messaging.rpc_conn_pool_size | default "30" }} + +# The pool size limit for connections expiration policy (integer value) +# from .default.oslo.messaging.conn_pool_min_size +{{ if not .default.oslo.messaging.conn_pool_min_size }}#{{ end }}conn_pool_min_size = {{ .default.oslo.messaging.conn_pool_min_size | default "2" }} + +# The time-to-live in sec of idle connections in the pool (integer value) +# from .default.oslo.messaging.conn_pool_ttl +{{ if not .default.oslo.messaging.conn_pool_ttl }}#{{ end }}conn_pool_ttl = {{ .default.oslo.messaging.conn_pool_ttl | default "1200" }} + +# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. +# The "host" option should point or resolve to this address. (string value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address +# from .default.oslo.messaging.rpc_zmq_bind_address +{{ if not .default.oslo.messaging.rpc_zmq_bind_address }}#{{ end }}rpc_zmq_bind_address = {{ .default.oslo.messaging.rpc_zmq_bind_address | default "*" }} + +# MatchMaker driver. (string value) +# Allowed values: redis, dummy +# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker +# from .default.oslo.messaging.rpc_zmq_matchmaker +{{ if not .default.oslo.messaging.rpc_zmq_matchmaker }}#{{ end }}rpc_zmq_matchmaker = {{ .default.oslo.messaging.rpc_zmq_matchmaker | default "redis" }} + +# Number of ZeroMQ contexts, defaults to 1. (integer value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts +# from .default.oslo.messaging.rpc_zmq_contexts +{{ if not .default.oslo.messaging.rpc_zmq_contexts }}#{{ end }}rpc_zmq_contexts = {{ .default.oslo.messaging.rpc_zmq_contexts | default "1" }} + +# Maximum number of ingress messages to locally buffer per topic. Default is +# unlimited. (integer value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog +# from .default.oslo.messaging.rpc_zmq_topic_backlog +{{ if not .default.oslo.messaging.rpc_zmq_topic_backlog }}#{{ end }}rpc_zmq_topic_backlog = {{ .default.oslo.messaging.rpc_zmq_topic_backlog | default "" }} + +# Directory for holding IPC sockets. (string value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir +# from .default.oslo.messaging.rpc_zmq_ipc_dir +{{ if not .default.oslo.messaging.rpc_zmq_ipc_dir }}#{{ end }}rpc_zmq_ipc_dir = {{ .default.oslo.messaging.rpc_zmq_ipc_dir | default "/var/run/openstack" }} + +# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match +# "host" option, if running Nova. (string value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_host +# from .default.oslo.messaging.rpc_zmq_host +{{ if not .default.oslo.messaging.rpc_zmq_host }}#{{ end }}rpc_zmq_host = {{ .default.oslo.messaging.rpc_zmq_host | default "localhost" }} + +# Seconds to wait before a cast expires (TTL). The default value of -1 specifies +# an infinite linger period. The value of 0 specifies no linger period. Pending +# messages shall be discarded immediately when the socket is closed. Only +# supported by impl_zmq. (integer value) +# Deprecated group/name - [DEFAULT]/rpc_cast_timeout +# from .default.oslo.messaging.rpc_cast_timeout +{{ if not .default.oslo.messaging.rpc_cast_timeout }}#{{ end }}rpc_cast_timeout = {{ .default.oslo.messaging.rpc_cast_timeout | default "-1" }} + +# The default number of seconds that poll should wait. Poll raises timeout +# exception when timeout expired. (integer value) +# Deprecated group/name - [DEFAULT]/rpc_poll_timeout +# from .default.oslo.messaging.rpc_poll_timeout +{{ if not .default.oslo.messaging.rpc_poll_timeout }}#{{ end }}rpc_poll_timeout = {{ .default.oslo.messaging.rpc_poll_timeout | default "1" }} + +# Expiration timeout in seconds of a name service record about existing target ( +# < 0 means no timeout). (integer value) +# Deprecated group/name - [DEFAULT]/zmq_target_expire +# from .default.oslo.messaging.zmq_target_expire +{{ if not .default.oslo.messaging.zmq_target_expire }}#{{ end }}zmq_target_expire = {{ .default.oslo.messaging.zmq_target_expire | default "300" }} + +# Update period in seconds of a name service record about existing target. +# (integer value) +# Deprecated group/name - [DEFAULT]/zmq_target_update +# from .default.oslo.messaging.zmq_target_update +{{ if not .default.oslo.messaging.zmq_target_update }}#{{ end }}zmq_target_update = {{ .default.oslo.messaging.zmq_target_update | default "180" }} + +# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean +# value) +# Deprecated group/name - [DEFAULT]/use_pub_sub +# from .default.oslo.messaging.use_pub_sub +{{ if not .default.oslo.messaging.use_pub_sub }}#{{ end }}use_pub_sub = {{ .default.oslo.messaging.use_pub_sub | default "true" }} + +# Use ROUTER remote proxy. (boolean value) +# Deprecated group/name - [DEFAULT]/use_router_proxy +# from .default.oslo.messaging.use_router_proxy +{{ if not .default.oslo.messaging.use_router_proxy }}#{{ end }}use_router_proxy = {{ .default.oslo.messaging.use_router_proxy | default "true" }} + +# Minimal port number for random ports range. (port value) +# Minimum value: 0 +# Maximum value: 65535 +# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port +# from .default.oslo.messaging.rpc_zmq_min_port +{{ if not .default.oslo.messaging.rpc_zmq_min_port }}#{{ end }}rpc_zmq_min_port = {{ .default.oslo.messaging.rpc_zmq_min_port | default "49153" }} + +# Maximal port number for random ports range. (integer value) +# Minimum value: 1 +# Maximum value: 65536 +# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port +# from .default.oslo.messaging.rpc_zmq_max_port +{{ if not .default.oslo.messaging.rpc_zmq_max_port }}#{{ end }}rpc_zmq_max_port = {{ .default.oslo.messaging.rpc_zmq_max_port | default "65536" }} + +# Number of retries to find free port number before fail with ZMQBindError. +# (integer value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries +# from .default.oslo.messaging.rpc_zmq_bind_port_retries +{{ if not .default.oslo.messaging.rpc_zmq_bind_port_retries }}#{{ end }}rpc_zmq_bind_port_retries = {{ .default.oslo.messaging.rpc_zmq_bind_port_retries | default "100" }} + +# Default serialization mechanism for serializing/deserializing +# outgoing/incoming messages (string value) +# Allowed values: json, msgpack +# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization +# from .default.oslo.messaging.rpc_zmq_serialization +{{ if not .default.oslo.messaging.rpc_zmq_serialization }}#{{ end }}rpc_zmq_serialization = {{ .default.oslo.messaging.rpc_zmq_serialization | default "json" }} + +# This option configures round-robin mode in zmq socket. True means not keeping +# a queue when server side disconnects. False means to keep queue and messages +# even if server is disconnected, when the server appears we send all +# accumulated messages to it. (boolean value) +# from .default.oslo.messaging.zmq_immediate +{{ if not .default.oslo.messaging.zmq_immediate }}#{{ end }}zmq_immediate = {{ .default.oslo.messaging.zmq_immediate | default "false" }} + +# Size of executor thread pool. (integer value) +# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size +# from .default.oslo.messaging.executor_thread_pool_size +{{ if not .default.oslo.messaging.executor_thread_pool_size }}#{{ end }}executor_thread_pool_size = {{ .default.oslo.messaging.executor_thread_pool_size | default "64" }} + +# Seconds to wait for a response from a call. (integer value) +# from .default.oslo.messaging.rpc_response_timeout +{{ if not .default.oslo.messaging.rpc_response_timeout }}#{{ end }}rpc_response_timeout = {{ .default.oslo.messaging.rpc_response_timeout | default "60" }} + +# A URL representing the messaging driver to use and its full configuration. +# (string value) +# from .default.oslo.messaging.transport_url +{{ if not .default.oslo.messaging.transport_url }}#{{ end }}transport_url = {{ .default.oslo.messaging.transport_url | default "" }} + +# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers +# include amqp and zmq. (string value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Replaced by [DEFAULT]/transport_url +# from .default.oslo.messaging.rpc_backend +{{ if not .default.oslo.messaging.rpc_backend }}#{{ end }}rpc_backend = {{ .default.oslo.messaging.rpc_backend | default "rabbit" }} + +# The default exchange under which topics are scoped. May be overridden by an +# exchange name specified in the transport_url option. (string value) +# from .default.oslo.messaging.control_exchange +{{ if not .default.oslo.messaging.control_exchange }}#{{ end }}control_exchange = {{ .default.oslo.messaging.control_exchange | default "openstack" }} -bind_port = {{ .Values.network.registry.port }} -workers = {{ .Values.misc.workers }} [database] -connection = {{ tuple "oslo_db" "internal" "user" "mysql" . | include "helm-toolkit.authenticated_endpoint_uri_lookup" }} -max_retries = -1 + +# +# From oslo.db +# + +# DEPRECATED: The file name to use with SQLite. (string value) +# Deprecated group/name - [DEFAULT]/sqlite_db +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Should use config option connection or slave_connection to connect the +# database. +# from .database.oslo.db.sqlite_db +{{ if not .database.oslo.db.sqlite_db }}#{{ end }}sqlite_db = {{ .database.oslo.db.sqlite_db | default "oslo.sqlite" }} + +# If True, SQLite uses synchronous mode. (boolean value) +# Deprecated group/name - [DEFAULT]/sqlite_synchronous +# from .database.oslo.db.sqlite_synchronous +{{ if not .database.oslo.db.sqlite_synchronous }}#{{ end }}sqlite_synchronous = {{ .database.oslo.db.sqlite_synchronous | default "true" }} + +# The back end to use for the database. (string value) +# Deprecated group/name - [DEFAULT]/db_backend +# from .database.oslo.db.backend +{{ if not .database.oslo.db.backend }}#{{ end }}backend = {{ .database.oslo.db.backend | default "sqlalchemy" }} + +# The SQLAlchemy connection string to use to connect to the database. (string +# value) +# Deprecated group/name - [DEFAULT]/sql_connection +# Deprecated group/name - [DATABASE]/sql_connection +# Deprecated group/name - [sql]/connection +# from .database.oslo.db.connection +{{ if not .database.oslo.db.connection }}#{{ end }}connection = {{ .database.oslo.db.connection | default "" }} + +# The SQLAlchemy connection string to use to connect to the slave database. +# (string value) +# from .database.oslo.db.slave_connection +{{ if not .database.oslo.db.slave_connection }}#{{ end }}slave_connection = {{ .database.oslo.db.slave_connection | default "" }} + +# The SQL mode to be used for MySQL sessions. This option, including the +# default, overrides any server-set SQL mode. To use whatever SQL mode is set by +# the server configuration, set this to no value. Example: mysql_sql_mode= +# (string value) +# from .database.oslo.db.mysql_sql_mode +{{ if not .database.oslo.db.mysql_sql_mode }}#{{ end }}mysql_sql_mode = {{ .database.oslo.db.mysql_sql_mode | default "TRADITIONAL" }} + +# Timeout before idle SQL connections are reaped. (integer value) +# Deprecated group/name - [DEFAULT]/sql_idle_timeout +# Deprecated group/name - [DATABASE]/sql_idle_timeout +# Deprecated group/name - [sql]/idle_timeout +# from .database.oslo.db.idle_timeout +{{ if not .database.oslo.db.idle_timeout }}#{{ end }}idle_timeout = {{ .database.oslo.db.idle_timeout | default "3600" }} + +# Minimum number of SQL connections to keep open in a pool. (integer value) +# Deprecated group/name - [DEFAULT]/sql_min_pool_size +# Deprecated group/name - [DATABASE]/sql_min_pool_size +# from .database.oslo.db.min_pool_size +{{ if not .database.oslo.db.min_pool_size }}#{{ end }}min_pool_size = {{ .database.oslo.db.min_pool_size | default "1" }} + +# Maximum number of SQL connections to keep open in a pool. Setting a value of 0 +# indicates no limit. (integer value) +# Deprecated group/name - [DEFAULT]/sql_max_pool_size +# Deprecated group/name - [DATABASE]/sql_max_pool_size +# from .database.oslo.db.max_pool_size +{{ if not .database.oslo.db.max_pool_size }}#{{ end }}max_pool_size = {{ .database.oslo.db.max_pool_size | default "5" }} + +# Maximum number of database connection retries during startup. Set to -1 to +# specify an infinite retry count. (integer value) +# Deprecated group/name - [DEFAULT]/sql_max_retries +# Deprecated group/name - [DATABASE]/sql_max_retries +# from .database.oslo.db.max_retries +{{ if not .database.oslo.db.max_retries }}#{{ end }}max_retries = {{ .database.oslo.db.max_retries | default "10" }} + +# Interval between retries of opening a SQL connection. (integer value) +# Deprecated group/name - [DEFAULT]/sql_retry_interval +# Deprecated group/name - [DATABASE]/reconnect_interval +# from .database.oslo.db.retry_interval +{{ if not .database.oslo.db.retry_interval }}#{{ end }}retry_interval = {{ .database.oslo.db.retry_interval | default "10" }} + +# If set, use this value for max_overflow with SQLAlchemy. (integer value) +# Deprecated group/name - [DEFAULT]/sql_max_overflow +# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow +# from .database.oslo.db.max_overflow +{{ if not .database.oslo.db.max_overflow }}#{{ end }}max_overflow = {{ .database.oslo.db.max_overflow | default "50" }} + +# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer +# value) +# Minimum value: 0 +# Maximum value: 100 +# Deprecated group/name - [DEFAULT]/sql_connection_debug +# from .database.oslo.db.connection_debug +{{ if not .database.oslo.db.connection_debug }}#{{ end }}connection_debug = {{ .database.oslo.db.connection_debug | default "0" }} + +# Add Python stack traces to SQL as comment strings. (boolean value) +# Deprecated group/name - [DEFAULT]/sql_connection_trace +# from .database.oslo.db.connection_trace +{{ if not .database.oslo.db.connection_trace }}#{{ end }}connection_trace = {{ .database.oslo.db.connection_trace | default "false" }} + +# If set, use this value for pool_timeout with SQLAlchemy. (integer value) +# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout +# from .database.oslo.db.pool_timeout +{{ if not .database.oslo.db.pool_timeout }}#{{ end }}pool_timeout = {{ .database.oslo.db.pool_timeout | default "" }} + +# Enable the experimental use of database reconnect on connection lost. (boolean +# value) +# from .database.oslo.db.use_db_reconnect +{{ if not .database.oslo.db.use_db_reconnect }}#{{ end }}use_db_reconnect = {{ .database.oslo.db.use_db_reconnect | default "false" }} + +# Seconds between retries of a database transaction. (integer value) +# from .database.oslo.db.db_retry_interval +{{ if not .database.oslo.db.db_retry_interval }}#{{ end }}db_retry_interval = {{ .database.oslo.db.db_retry_interval | default "1" }} + +# If True, increases the interval between retries of a database operation up to +# db_max_retry_interval. (boolean value) +# from .database.oslo.db.db_inc_retry_interval +{{ if not .database.oslo.db.db_inc_retry_interval }}#{{ end }}db_inc_retry_interval = {{ .database.oslo.db.db_inc_retry_interval | default "true" }} + +# If db_inc_retry_interval is set, the maximum seconds between retries of a +# database operation. (integer value) +# from .database.oslo.db.db_max_retry_interval +{{ if not .database.oslo.db.db_max_retry_interval }}#{{ end }}db_max_retry_interval = {{ .database.oslo.db.db_max_retry_interval | default "10" }} + +# Maximum retries in case of connection error or deadlock error before error is +# raised. Set to -1 to specify an infinite retry count. (integer value) +# from .database.oslo.db.db_max_retries +{{ if not .database.oslo.db.db_max_retries }}#{{ end }}db_max_retries = {{ .database.oslo.db.db_max_retries | default "20" }} + +# +# From oslo.db.concurrency +# + +# Enable the experimental use of thread pooling for all DB API calls (boolean +# value) +# Deprecated group/name - [DEFAULT]/dbapi_use_tpool +# from .database.oslo.db.concurrency.use_tpool +{{ if not .database.oslo.db.concurrency.use_tpool }}#{{ end }}use_tpool = {{ .database.oslo.db.concurrency.use_tpool | default "false" }} + [keystone_authtoken] -auth_version = v3 -auth_url = {{ tuple "identity" "internal" "api" . | include "helm-toolkit.keystone_endpoint_uri_lookup" }} -auth_type = password -region_name = {{ .Values.keystone.glance_region_name }} -project_domain_name = {{ .Values.keystone.glance_project_domain }} -project_name = {{ .Values.keystone.glance_project_name }} -user_domain_name = {{ .Values.keystone.glance_user_domain }} -username = {{ .Values.keystone.glance_user }} -password = {{ .Values.keystone.glance_password }} -[paste_deploy] -flavor = keystone +# FIXME(alanmeadows) - added the next several lines because oslo gen config refuses to generate the line items required in keystonemiddleware +# for authentication - while it does support an "auth_section" parameter to locate these elsewhere, it would be a strange divergence +# from how neutron keystone authentication is stored today - ocata and later appear to use a "service" user section which can house these details +# and does successfully generate beyond newton, so likely this whole section will be removed the next time we generate this file + +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_url }}#{{ end }}auth_url = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_url | default "" }} +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.region_name }}#{{ end }}region_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.region_name | default "" }} +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.project_name }}#{{ end }}project_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.project_name | default "" }} +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.project_domain_name }}#{{ end }}project_domain_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.project_domain_name | default "" }} +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.user_domain_name }}#{{ end }}user_domain_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.user_domain_name | default "" }} +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.username }}#{{ end }}username = {{ .keystone_authtoken.keystonemiddleware.auth_token.username | default "" }} +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.password }}#{{ end }}password = {{ .keystone_authtoken.keystonemiddleware.auth_token.password | default "" }} + +# FIXME(alanmeadows) - added for some newton images using older keystoneauth1 libs but are still "newton" +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_url }}#{{ end }}auth_url = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_url | default "" }} + +# +# From keystonemiddleware.auth_token +# + +# Complete "public" Identity API endpoint. This endpoint should not be an +# "admin" endpoint, as it should be accessible by all end users. Unauthenticated +# clients are redirected to this endpoint to authenticate. Although this +# endpoint should ideally be unversioned, client support in the wild varies. +# If you're using a versioned v2 endpoint here, then this should *not* be the +# same endpoint the service user utilizes for validating tokens, because normal +# end users may not be able to reach that endpoint. (string value) +# from .keystone_authtoken.keystonemiddleware.auth_token.auth_uri +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_uri }}#{{ end }}auth_uri = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_uri | default "" }} + +# API version of the admin Identity API endpoint. (string value) +# from .keystone_authtoken.keystonemiddleware.auth_token.auth_version +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_version }}#{{ end }}auth_version = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_version | default "" }} + +# Do not handle authorization requests within the middleware, but delegate the +# authorization decision to downstream WSGI components. (boolean value) +# from .keystone_authtoken.keystonemiddleware.auth_token.delay_auth_decision +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.delay_auth_decision }}#{{ end }}delay_auth_decision = {{ .keystone_authtoken.keystonemiddleware.auth_token.delay_auth_decision | default "false" }} + +# Request timeout value for communicating with Identity API server. (integer +# value) +# from .keystone_authtoken.keystonemiddleware.auth_token.http_connect_timeout +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.http_connect_timeout }}#{{ end }}http_connect_timeout = {{ .keystone_authtoken.keystonemiddleware.auth_token.http_connect_timeout | default "" }} + +# How many times are we trying to reconnect when communicating with Identity API +# Server. (integer value) +# from .keystone_authtoken.keystonemiddleware.auth_token.http_request_max_retries +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.http_request_max_retries }}#{{ end }}http_request_max_retries = {{ .keystone_authtoken.keystonemiddleware.auth_token.http_request_max_retries | default "3" }} + +# Request environment key where the Swift cache object is stored. When +# auth_token middleware is deployed with a Swift cache, use this option to have +# the middleware share a caching backend with swift. Otherwise, use the +# ``memcached_servers`` option instead. (string value) +# from .keystone_authtoken.keystonemiddleware.auth_token.cache +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.cache }}#{{ end }}cache = {{ .keystone_authtoken.keystonemiddleware.auth_token.cache | default "" }} + +# Required if identity server requires client certificate (string value) +# from .keystone_authtoken.keystonemiddleware.auth_token.certfile +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.certfile }}#{{ end }}certfile = {{ .keystone_authtoken.keystonemiddleware.auth_token.certfile | default "" }} + +# Required if identity server requires client certificate (string value) +# from .keystone_authtoken.keystonemiddleware.auth_token.keyfile +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.keyfile }}#{{ end }}keyfile = {{ .keystone_authtoken.keystonemiddleware.auth_token.keyfile | default "" }} + +# A PEM encoded Certificate Authority to use when verifying HTTPs connections. +# Defaults to system CAs. (string value) +# from .keystone_authtoken.keystonemiddleware.auth_token.cafile +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.cafile }}#{{ end }}cafile = {{ .keystone_authtoken.keystonemiddleware.auth_token.cafile | default "" }} + +# Verify HTTPS connections. (boolean value) +# from .keystone_authtoken.keystonemiddleware.auth_token.insecure +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.insecure }}#{{ end }}insecure = {{ .keystone_authtoken.keystonemiddleware.auth_token.insecure | default "false" }} + +# The region in which the identity server can be found. (string value) +# from .keystone_authtoken.keystonemiddleware.auth_token.region_name +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.region_name }}#{{ end }}region_name = {{ .keystone_authtoken.keystonemiddleware.auth_token.region_name | default "" }} + +# Directory used to cache files related to PKI tokens. (string value) +# from .keystone_authtoken.keystonemiddleware.auth_token.signing_dir +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.signing_dir }}#{{ end }}signing_dir = {{ .keystone_authtoken.keystonemiddleware.auth_token.signing_dir | default "" }} + +# Optionally specify a list of memcached server(s) to use for caching. If left +# undefined, tokens will instead be cached in-process. (list value) +# Deprecated group/name - [keystone_authtoken]/memcache_servers +# from .keystone_authtoken.keystonemiddleware.auth_token.memcached_servers +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcached_servers }}#{{ end }}memcached_servers = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcached_servers | default "" }} + +# In order to prevent excessive effort spent validating tokens, the middleware +# caches previously-seen tokens for a configurable duration (in seconds). Set to +# -1 to disable caching completely. (integer value) +# from .keystone_authtoken.keystonemiddleware.auth_token.token_cache_time +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.token_cache_time }}#{{ end }}token_cache_time = {{ .keystone_authtoken.keystonemiddleware.auth_token.token_cache_time | default "300" }} + +# Determines the frequency at which the list of revoked tokens is retrieved from +# the Identity service (in seconds). A high number of revocation events combined +# with a low cache duration may significantly reduce performance. Only valid for +# PKI tokens. (integer value) +# from .keystone_authtoken.keystonemiddleware.auth_token.revocation_cache_time +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.revocation_cache_time }}#{{ end }}revocation_cache_time = {{ .keystone_authtoken.keystonemiddleware.auth_token.revocation_cache_time | default "10" }} + +# (Optional) If defined, indicate whether token data should be authenticated or +# authenticated and encrypted. If MAC, token data is authenticated (with HMAC) +# in the cache. If ENCRYPT, token data is encrypted and authenticated in the +# cache. If the value is not one of these options or empty, auth_token will +# raise an exception on initialization. (string value) +# Allowed values: None, MAC, ENCRYPT +# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_security_strategy +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_security_strategy }}#{{ end }}memcache_security_strategy = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_security_strategy | default "None" }} + +# (Optional, mandatory if memcache_security_strategy is defined) This string is +# used for key derivation. (string value) +# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_secret_key +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_secret_key }}#{{ end }}memcache_secret_key = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_secret_key | default "" }} + +# (Optional) Number of seconds memcached server is considered dead before it is +# tried again. (integer value) +# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_dead_retry +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_dead_retry }}#{{ end }}memcache_pool_dead_retry = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_dead_retry | default "300" }} + +# (Optional) Maximum total number of open connections to every memcached server. +# (integer value) +# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_maxsize +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_maxsize }}#{{ end }}memcache_pool_maxsize = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_maxsize | default "10" }} + +# (Optional) Socket timeout in seconds for communicating with a memcached +# server. (integer value) +# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_socket_timeout +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_socket_timeout }}#{{ end }}memcache_pool_socket_timeout = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_socket_timeout | default "3" }} + +# (Optional) Number of seconds a connection to memcached is held unused in the +# pool before it is closed. (integer value) +# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_unused_timeout +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_unused_timeout }}#{{ end }}memcache_pool_unused_timeout = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_unused_timeout | default "60" }} + +# (Optional) Number of seconds that an operation will wait to get a memcached +# client connection from the pool. (integer value) +# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_conn_get_timeout +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_conn_get_timeout }}#{{ end }}memcache_pool_conn_get_timeout = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_pool_conn_get_timeout | default "10" }} + +# (Optional) Use the advanced (eventlet safe) memcached client pool. The +# advanced pool will only work under python 2.x. (boolean value) +# from .keystone_authtoken.keystonemiddleware.auth_token.memcache_use_advanced_pool +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.memcache_use_advanced_pool }}#{{ end }}memcache_use_advanced_pool = {{ .keystone_authtoken.keystonemiddleware.auth_token.memcache_use_advanced_pool | default "false" }} + +# (Optional) Indicate whether to set the X-Service-Catalog header. If False, +# middleware will not ask for service catalog on token validation and will not +# set the X-Service-Catalog header. (boolean value) +# from .keystone_authtoken.keystonemiddleware.auth_token.include_service_catalog +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.include_service_catalog }}#{{ end }}include_service_catalog = {{ .keystone_authtoken.keystonemiddleware.auth_token.include_service_catalog | default "true" }} + +# Used to control the use and type of token binding. Can be set to: "disabled" +# to not check token binding. "permissive" (default) to validate binding +# information if the bind type is of a form known to the server and ignore it if +# not. "strict" like "permissive" but if the bind type is unknown the token will +# be rejected. "required" any form of token binding is needed to be allowed. +# Finally the name of a binding method that must be present in tokens. (string +# value) +# from .keystone_authtoken.keystonemiddleware.auth_token.enforce_token_bind +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.enforce_token_bind }}#{{ end }}enforce_token_bind = {{ .keystone_authtoken.keystonemiddleware.auth_token.enforce_token_bind | default "permissive" }} + +# If true, the revocation list will be checked for cached tokens. This requires +# that PKI tokens are configured on the identity server. (boolean value) +# from .keystone_authtoken.keystonemiddleware.auth_token.check_revocations_for_cached +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.check_revocations_for_cached }}#{{ end }}check_revocations_for_cached = {{ .keystone_authtoken.keystonemiddleware.auth_token.check_revocations_for_cached | default "false" }} + +# Hash algorithms to use for hashing PKI tokens. This may be a single algorithm +# or multiple. The algorithms are those supported by Python standard +# hashlib.new(). The hashes will be tried in the order given, so put the +# preferred one first for performance. The result of the first hash will be +# stored in the cache. This will typically be set to multiple values only while +# migrating from a less secure algorithm to a more secure one. Once all the old +# tokens are expired this option should be set to a single value for better +# performance. (list value) +# from .keystone_authtoken.keystonemiddleware.auth_token.hash_algorithms +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.hash_algorithms }}#{{ end }}hash_algorithms = {{ .keystone_authtoken.keystonemiddleware.auth_token.hash_algorithms | default "md5" }} + +# Authentication type to load (string value) +# Deprecated group/name - [keystone_authtoken]/auth_plugin +# from .keystone_authtoken.keystonemiddleware.auth_token.auth_type +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_type }}#{{ end }}auth_type = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_type | default "" }} + +# Config Section from which to load plugin specific options (string value) +# from .keystone_authtoken.keystonemiddleware.auth_token.auth_section +{{ if not .keystone_authtoken.keystonemiddleware.auth_token.auth_section }}#{{ end }}auth_section = {{ .keystone_authtoken.keystonemiddleware.auth_token.auth_section | default "" }} + + +[matchmaker_redis] + +# +# From oslo.messaging +# + +# DEPRECATED: Host to locate redis. (string value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Replaced by [DEFAULT]/transport_url +# from .matchmaker_redis.oslo.messaging.host +{{ if not .matchmaker_redis.oslo.messaging.host }}#{{ end }}host = {{ .matchmaker_redis.oslo.messaging.host | default "127.0.0.1" }} + +# DEPRECATED: Use this port to connect to redis host. (port value) +# Minimum value: 0 +# Maximum value: 65535 +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Replaced by [DEFAULT]/transport_url +# from .matchmaker_redis.oslo.messaging.port +{{ if not .matchmaker_redis.oslo.messaging.port }}#{{ end }}port = {{ .matchmaker_redis.oslo.messaging.port | default "6379" }} + +# DEPRECATED: Password for Redis server (optional). (string value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Replaced by [DEFAULT]/transport_url +# from .matchmaker_redis.oslo.messaging.password +{{ if not .matchmaker_redis.oslo.messaging.password }}#{{ end }}password = {{ .matchmaker_redis.oslo.messaging.password | default "" }} + +# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode) e.g. +# [host:port, host1:port ... ] (list value) +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Replaced by [DEFAULT]/transport_url +# from .matchmaker_redis.oslo.messaging.sentinel_hosts +{{ if not .matchmaker_redis.oslo.messaging.sentinel_hosts }}#{{ end }}sentinel_hosts = {{ .matchmaker_redis.oslo.messaging.sentinel_hosts | default "" }} + +# Redis replica set name. (string value) +# from .matchmaker_redis.oslo.messaging.sentinel_group_name +{{ if not .matchmaker_redis.oslo.messaging.sentinel_group_name }}#{{ end }}sentinel_group_name = {{ .matchmaker_redis.oslo.messaging.sentinel_group_name | default "oslo-messaging-zeromq" }} + +# Time in ms to wait between connection attempts. (integer value) +# from .matchmaker_redis.oslo.messaging.wait_timeout +{{ if not .matchmaker_redis.oslo.messaging.wait_timeout }}#{{ end }}wait_timeout = {{ .matchmaker_redis.oslo.messaging.wait_timeout | default "2000" }} + +# Time in ms to wait before the transaction is killed. (integer value) +# from .matchmaker_redis.oslo.messaging.check_timeout +{{ if not .matchmaker_redis.oslo.messaging.check_timeout }}#{{ end }}check_timeout = {{ .matchmaker_redis.oslo.messaging.check_timeout | default "20000" }} + +# Timeout in ms on blocking socket operations (integer value) +# from .matchmaker_redis.oslo.messaging.socket_timeout +{{ if not .matchmaker_redis.oslo.messaging.socket_timeout }}#{{ end }}socket_timeout = {{ .matchmaker_redis.oslo.messaging.socket_timeout | default "10000" }} + + +[oslo_messaging_amqp] + +# +# From oslo.messaging +# + +# Name for the AMQP container. must be globally unique. Defaults to a generated +# UUID (string value) +# Deprecated group/name - [amqp1]/container_name +# from .oslo_messaging_amqp.oslo.messaging.container_name +{{ if not .oslo_messaging_amqp.oslo.messaging.container_name }}#{{ end }}container_name = {{ .oslo_messaging_amqp.oslo.messaging.container_name | default "" }} + +# Timeout for inactive connections (in seconds) (integer value) +# Deprecated group/name - [amqp1]/idle_timeout +# from .oslo_messaging_amqp.oslo.messaging.idle_timeout +{{ if not .oslo_messaging_amqp.oslo.messaging.idle_timeout }}#{{ end }}idle_timeout = {{ .oslo_messaging_amqp.oslo.messaging.idle_timeout | default "0" }} + +# Debug: dump AMQP frames to stdout (boolean value) +# Deprecated group/name - [amqp1]/trace +# from .oslo_messaging_amqp.oslo.messaging.trace +{{ if not .oslo_messaging_amqp.oslo.messaging.trace }}#{{ end }}trace = {{ .oslo_messaging_amqp.oslo.messaging.trace | default "false" }} + +# CA certificate PEM file to verify server certificate (string value) +# Deprecated group/name - [amqp1]/ssl_ca_file +# from .oslo_messaging_amqp.oslo.messaging.ssl_ca_file +{{ if not .oslo_messaging_amqp.oslo.messaging.ssl_ca_file }}#{{ end }}ssl_ca_file = {{ .oslo_messaging_amqp.oslo.messaging.ssl_ca_file | default "" }} + +# Identifying certificate PEM file to present to clients (string value) +# Deprecated group/name - [amqp1]/ssl_cert_file +# from .oslo_messaging_amqp.oslo.messaging.ssl_cert_file +{{ if not .oslo_messaging_amqp.oslo.messaging.ssl_cert_file }}#{{ end }}ssl_cert_file = {{ .oslo_messaging_amqp.oslo.messaging.ssl_cert_file | default "" }} + +# Private key PEM file used to sign cert_file certificate (string value) +# Deprecated group/name - [amqp1]/ssl_key_file +# from .oslo_messaging_amqp.oslo.messaging.ssl_key_file +{{ if not .oslo_messaging_amqp.oslo.messaging.ssl_key_file }}#{{ end }}ssl_key_file = {{ .oslo_messaging_amqp.oslo.messaging.ssl_key_file | default "" }} + +# Password for decrypting ssl_key_file (if encrypted) (string value) +# Deprecated group/name - [amqp1]/ssl_key_password +# from .oslo_messaging_amqp.oslo.messaging.ssl_key_password +{{ if not .oslo_messaging_amqp.oslo.messaging.ssl_key_password }}#{{ end }}ssl_key_password = {{ .oslo_messaging_amqp.oslo.messaging.ssl_key_password | default "" }} + +# Accept clients using either SSL or plain TCP (boolean value) +# Deprecated group/name - [amqp1]/allow_insecure_clients +# from .oslo_messaging_amqp.oslo.messaging.allow_insecure_clients +{{ if not .oslo_messaging_amqp.oslo.messaging.allow_insecure_clients }}#{{ end }}allow_insecure_clients = {{ .oslo_messaging_amqp.oslo.messaging.allow_insecure_clients | default "false" }} + +# Space separated list of acceptable SASL mechanisms (string value) +# Deprecated group/name - [amqp1]/sasl_mechanisms +# from .oslo_messaging_amqp.oslo.messaging.sasl_mechanisms +{{ if not .oslo_messaging_amqp.oslo.messaging.sasl_mechanisms }}#{{ end }}sasl_mechanisms = {{ .oslo_messaging_amqp.oslo.messaging.sasl_mechanisms | default "" }} + +# Path to directory that contains the SASL configuration (string value) +# Deprecated group/name - [amqp1]/sasl_config_dir +# from .oslo_messaging_amqp.oslo.messaging.sasl_config_dir +{{ if not .oslo_messaging_amqp.oslo.messaging.sasl_config_dir }}#{{ end }}sasl_config_dir = {{ .oslo_messaging_amqp.oslo.messaging.sasl_config_dir | default "" }} + +# Name of configuration file (without .conf suffix) (string value) +# Deprecated group/name - [amqp1]/sasl_config_name +# from .oslo_messaging_amqp.oslo.messaging.sasl_config_name +{{ if not .oslo_messaging_amqp.oslo.messaging.sasl_config_name }}#{{ end }}sasl_config_name = {{ .oslo_messaging_amqp.oslo.messaging.sasl_config_name | default "" }} + +# User name for message broker authentication (string value) +# Deprecated group/name - [amqp1]/username +# from .oslo_messaging_amqp.oslo.messaging.username +{{ if not .oslo_messaging_amqp.oslo.messaging.username }}#{{ end }}username = {{ .oslo_messaging_amqp.oslo.messaging.username | default "" }} + +# Password for message broker authentication (string value) +# Deprecated group/name - [amqp1]/password +# from .oslo_messaging_amqp.oslo.messaging.password +{{ if not .oslo_messaging_amqp.oslo.messaging.password }}#{{ end }}password = {{ .oslo_messaging_amqp.oslo.messaging.password | default "" }} + +# Seconds to pause before attempting to re-connect. (integer value) +# Minimum value: 1 +# from .oslo_messaging_amqp.oslo.messaging.connection_retry_interval +{{ if not .oslo_messaging_amqp.oslo.messaging.connection_retry_interval }}#{{ end }}connection_retry_interval = {{ .oslo_messaging_amqp.oslo.messaging.connection_retry_interval | default "1" }} + +# Increase the connection_retry_interval by this many seconds after each +# unsuccessful failover attempt. (integer value) +# Minimum value: 0 +# from .oslo_messaging_amqp.oslo.messaging.connection_retry_backoff +{{ if not .oslo_messaging_amqp.oslo.messaging.connection_retry_backoff }}#{{ end }}connection_retry_backoff = {{ .oslo_messaging_amqp.oslo.messaging.connection_retry_backoff | default "2" }} + +# Maximum limit for connection_retry_interval + connection_retry_backoff +# (integer value) +# Minimum value: 1 +# from .oslo_messaging_amqp.oslo.messaging.connection_retry_interval_max +{{ if not .oslo_messaging_amqp.oslo.messaging.connection_retry_interval_max }}#{{ end }}connection_retry_interval_max = {{ .oslo_messaging_amqp.oslo.messaging.connection_retry_interval_max | default "30" }} + +# Time to pause between re-connecting an AMQP 1.0 link that failed due to a +# recoverable error. (integer value) +# Minimum value: 1 +# from .oslo_messaging_amqp.oslo.messaging.link_retry_delay +{{ if not .oslo_messaging_amqp.oslo.messaging.link_retry_delay }}#{{ end }}link_retry_delay = {{ .oslo_messaging_amqp.oslo.messaging.link_retry_delay | default "10" }} + +# The deadline for an rpc reply message delivery. Only used when caller does not +# provide a timeout expiry. (integer value) +# Minimum value: 5 +# from .oslo_messaging_amqp.oslo.messaging.default_reply_timeout +{{ if not .oslo_messaging_amqp.oslo.messaging.default_reply_timeout }}#{{ end }}default_reply_timeout = {{ .oslo_messaging_amqp.oslo.messaging.default_reply_timeout | default "30" }} + +# The deadline for an rpc cast or call message delivery. Only used when caller +# does not provide a timeout expiry. (integer value) +# Minimum value: 5 +# from .oslo_messaging_amqp.oslo.messaging.default_send_timeout +{{ if not .oslo_messaging_amqp.oslo.messaging.default_send_timeout }}#{{ end }}default_send_timeout = {{ .oslo_messaging_amqp.oslo.messaging.default_send_timeout | default "30" }} + +# The deadline for a sent notification message delivery. Only used when caller +# does not provide a timeout expiry. (integer value) +# Minimum value: 5 +# from .oslo_messaging_amqp.oslo.messaging.default_notify_timeout +{{ if not .oslo_messaging_amqp.oslo.messaging.default_notify_timeout }}#{{ end }}default_notify_timeout = {{ .oslo_messaging_amqp.oslo.messaging.default_notify_timeout | default "30" }} + +# Indicates the addressing mode used by the driver. +# Permitted values: +# 'legacy' - use legacy non-routable addressing +# 'routable' - use routable addresses +# 'dynamic' - use legacy addresses if the message bus does not support routing +# otherwise use routable addressing (string value) +# from .oslo_messaging_amqp.oslo.messaging.addressing_mode +{{ if not .oslo_messaging_amqp.oslo.messaging.addressing_mode }}#{{ end }}addressing_mode = {{ .oslo_messaging_amqp.oslo.messaging.addressing_mode | default "dynamic" }} + +# address prefix used when sending to a specific server (string value) +# Deprecated group/name - [amqp1]/server_request_prefix +# from .oslo_messaging_amqp.oslo.messaging.server_request_prefix +{{ if not .oslo_messaging_amqp.oslo.messaging.server_request_prefix }}#{{ end }}server_request_prefix = {{ .oslo_messaging_amqp.oslo.messaging.server_request_prefix | default "exclusive" }} + +# address prefix used when broadcasting to all servers (string value) +# Deprecated group/name - [amqp1]/broadcast_prefix +# from .oslo_messaging_amqp.oslo.messaging.broadcast_prefix +{{ if not .oslo_messaging_amqp.oslo.messaging.broadcast_prefix }}#{{ end }}broadcast_prefix = {{ .oslo_messaging_amqp.oslo.messaging.broadcast_prefix | default "broadcast" }} + +# address prefix when sending to any server in group (string value) +# Deprecated group/name - [amqp1]/group_request_prefix +# from .oslo_messaging_amqp.oslo.messaging.group_request_prefix +{{ if not .oslo_messaging_amqp.oslo.messaging.group_request_prefix }}#{{ end }}group_request_prefix = {{ .oslo_messaging_amqp.oslo.messaging.group_request_prefix | default "unicast" }} + +# Address prefix for all generated RPC addresses (string value) +# from .oslo_messaging_amqp.oslo.messaging.rpc_address_prefix +{{ if not .oslo_messaging_amqp.oslo.messaging.rpc_address_prefix }}#{{ end }}rpc_address_prefix = {{ .oslo_messaging_amqp.oslo.messaging.rpc_address_prefix | default "openstack.org/om/rpc" }} + +# Address prefix for all generated Notification addresses (string value) +# from .oslo_messaging_amqp.oslo.messaging.notify_address_prefix +{{ if not .oslo_messaging_amqp.oslo.messaging.notify_address_prefix }}#{{ end }}notify_address_prefix = {{ .oslo_messaging_amqp.oslo.messaging.notify_address_prefix | default "openstack.org/om/notify" }} + +# Appended to the address prefix when sending a fanout message. Used by the +# message bus to identify fanout messages. (string value) +# from .oslo_messaging_amqp.oslo.messaging.multicast_address +{{ if not .oslo_messaging_amqp.oslo.messaging.multicast_address }}#{{ end }}multicast_address = {{ .oslo_messaging_amqp.oslo.messaging.multicast_address | default "multicast" }} + +# Appended to the address prefix when sending to a particular RPC/Notification +# server. Used by the message bus to identify messages sent to a single +# destination. (string value) +# from .oslo_messaging_amqp.oslo.messaging.unicast_address +{{ if not .oslo_messaging_amqp.oslo.messaging.unicast_address }}#{{ end }}unicast_address = {{ .oslo_messaging_amqp.oslo.messaging.unicast_address | default "unicast" }} + +# Appended to the address prefix when sending to a group of consumers. Used by +# the message bus to identify messages that should be delivered in a round-robin +# fashion across consumers. (string value) +# from .oslo_messaging_amqp.oslo.messaging.anycast_address +{{ if not .oslo_messaging_amqp.oslo.messaging.anycast_address }}#{{ end }}anycast_address = {{ .oslo_messaging_amqp.oslo.messaging.anycast_address | default "anycast" }} + +# Exchange name used in notification addresses. +# Exchange name resolution precedence: +# Target.exchange if set +# else default_notification_exchange if set +# else control_exchange if set +# else 'notify' (string value) +# from .oslo_messaging_amqp.oslo.messaging.default_notification_exchange +{{ if not .oslo_messaging_amqp.oslo.messaging.default_notification_exchange }}#{{ end }}default_notification_exchange = {{ .oslo_messaging_amqp.oslo.messaging.default_notification_exchange | default "" }} + +# Exchange name used in RPC addresses. +# Exchange name resolution precedence: +# Target.exchange if set +# else default_rpc_exchange if set +# else control_exchange if set +# else 'rpc' (string value) +# from .oslo_messaging_amqp.oslo.messaging.default_rpc_exchange +{{ if not .oslo_messaging_amqp.oslo.messaging.default_rpc_exchange }}#{{ end }}default_rpc_exchange = {{ .oslo_messaging_amqp.oslo.messaging.default_rpc_exchange | default "" }} + +# Window size for incoming RPC Reply messages. (integer value) +# Minimum value: 1 +# from .oslo_messaging_amqp.oslo.messaging.reply_link_credit +{{ if not .oslo_messaging_amqp.oslo.messaging.reply_link_credit }}#{{ end }}reply_link_credit = {{ .oslo_messaging_amqp.oslo.messaging.reply_link_credit | default "200" }} + +# Window size for incoming RPC Request messages (integer value) +# Minimum value: 1 +# from .oslo_messaging_amqp.oslo.messaging.rpc_server_credit +{{ if not .oslo_messaging_amqp.oslo.messaging.rpc_server_credit }}#{{ end }}rpc_server_credit = {{ .oslo_messaging_amqp.oslo.messaging.rpc_server_credit | default "100" }} + +# Window size for incoming Notification messages (integer value) +# Minimum value: 1 +# from .oslo_messaging_amqp.oslo.messaging.notify_server_credit +{{ if not .oslo_messaging_amqp.oslo.messaging.notify_server_credit }}#{{ end }}notify_server_credit = {{ .oslo_messaging_amqp.oslo.messaging.notify_server_credit | default "100" }} + [oslo_messaging_notifications] -driver = noop + +# +# From oslo.messaging +# + +# The Drivers(s) to handle sending notifications. Possible values are messaging, +# messagingv2, routing, log, test, noop (multi valued) +# Deprecated group/name - [DEFAULT]/notification_driver +# from .oslo_messaging_notifications.oslo.messaging.driver (multiopt) +{{ if not .oslo_messaging_notifications.oslo.messaging.driver }}#driver = {{ .oslo_messaging_notifications.oslo.messaging.driver | default "" }}{{ else }}{{ range .oslo_messaging_notifications.oslo.messaging.driver }}driver = {{ . }}{{ end }}{{ end }} + +# A URL representing the messaging driver to use for notifications. If not set, +# we fall back to the same configuration used for RPC. (string value) +# Deprecated group/name - [DEFAULT]/notification_transport_url +# from .oslo_messaging_notifications.oslo.messaging.transport_url +{{ if not .oslo_messaging_notifications.oslo.messaging.transport_url }}#{{ end }}transport_url = {{ .oslo_messaging_notifications.oslo.messaging.transport_url | default "" }} + +# AMQP topic used for OpenStack notifications. (list value) +# Deprecated group/name - [rpc_notifier2]/topics +# Deprecated group/name - [DEFAULT]/notification_topics +# from .oslo_messaging_notifications.oslo.messaging.topics +{{ if not .oslo_messaging_notifications.oslo.messaging.topics }}#{{ end }}topics = {{ .oslo_messaging_notifications.oslo.messaging.topics | default "notifications" }} + + +[oslo_messaging_rabbit] + +# +# From oslo.messaging +# + +# Use durable queues in AMQP. (boolean value) +# Deprecated group/name - [DEFAULT]/amqp_durable_queues +# Deprecated group/name - [DEFAULT]/rabbit_durable_queues +# from .oslo_messaging_rabbit.oslo.messaging.amqp_durable_queues +{{ if not .oslo_messaging_rabbit.oslo.messaging.amqp_durable_queues }}#{{ end }}amqp_durable_queues = {{ .oslo_messaging_rabbit.oslo.messaging.amqp_durable_queues | default "false" }} + +# Auto-delete queues in AMQP. (boolean value) +# Deprecated group/name - [DEFAULT]/amqp_auto_delete +# from .oslo_messaging_rabbit.oslo.messaging.amqp_auto_delete +{{ if not .oslo_messaging_rabbit.oslo.messaging.amqp_auto_delete }}#{{ end }}amqp_auto_delete = {{ .oslo_messaging_rabbit.oslo.messaging.amqp_auto_delete | default "false" }} + +# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and +# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some +# distributions. (string value) +# Deprecated group/name - [DEFAULT]/kombu_ssl_version +# from .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_version +{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_version }}#{{ end }}kombu_ssl_version = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_version | default "" }} + +# SSL key file (valid only if SSL enabled). (string value) +# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile +# from .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_keyfile +{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_keyfile }}#{{ end }}kombu_ssl_keyfile = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_keyfile | default "" }} + +# SSL cert file (valid only if SSL enabled). (string value) +# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile +# from .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_certfile +{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_certfile }}#{{ end }}kombu_ssl_certfile = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_certfile | default "" }} + +# SSL certification authority file (valid only if SSL enabled). (string value) +# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs +# from .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_ca_certs +{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_ca_certs }}#{{ end }}kombu_ssl_ca_certs = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_ssl_ca_certs | default "" }} + +# How long to wait before reconnecting in response to an AMQP consumer cancel +# notification. (floating point value) +# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay +# from .oslo_messaging_rabbit.oslo.messaging.kombu_reconnect_delay +{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_reconnect_delay }}#{{ end }}kombu_reconnect_delay = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_reconnect_delay | default "1.0" }} + +# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not +# be used. This option may not be available in future versions. (string value) +# from .oslo_messaging_rabbit.oslo.messaging.kombu_compression +{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_compression }}#{{ end }}kombu_compression = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_compression | default "" }} + +# How long to wait a missing client before abandoning to send it its replies. +# This value should not be longer than rpc_response_timeout. (integer value) +# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout +# from .oslo_messaging_rabbit.oslo.messaging.kombu_missing_consumer_retry_timeout +{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_missing_consumer_retry_timeout }}#{{ end }}kombu_missing_consumer_retry_timeout = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_missing_consumer_retry_timeout | default "60" }} + +# Determines how the next RabbitMQ node is chosen in case the one we are +# currently connected to becomes unavailable. Takes effect only if more than one +# RabbitMQ node is provided in config. (string value) +# Allowed values: round-robin, shuffle +# from .oslo_messaging_rabbit.oslo.messaging.kombu_failover_strategy +{{ if not .oslo_messaging_rabbit.oslo.messaging.kombu_failover_strategy }}#{{ end }}kombu_failover_strategy = {{ .oslo_messaging_rabbit.oslo.messaging.kombu_failover_strategy | default "round-robin" }} + +# DEPRECATED: The RabbitMQ broker address where a single node is used. (string +# value) +# Deprecated group/name - [DEFAULT]/rabbit_host +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Replaced by [DEFAULT]/transport_url +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_host +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_host }}#{{ end }}rabbit_host = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_host | default "localhost" }} + +# DEPRECATED: The RabbitMQ broker port where a single node is used. (port value) +# Minimum value: 0 +# Maximum value: 65535 +# Deprecated group/name - [DEFAULT]/rabbit_port +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Replaced by [DEFAULT]/transport_url +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_port +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_port }}#{{ end }}rabbit_port = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_port | default "5672" }} + +# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value) +# Deprecated group/name - [DEFAULT]/rabbit_hosts +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Replaced by [DEFAULT]/transport_url +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_hosts +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_hosts }}#{{ end }}rabbit_hosts = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_hosts | default "$rabbit_host:$rabbit_port" }} + +# Connect over SSL for RabbitMQ. (boolean value) +# Deprecated group/name - [DEFAULT]/rabbit_use_ssl +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_use_ssl +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_use_ssl }}#{{ end }}rabbit_use_ssl = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_use_ssl | default "false" }} + +# DEPRECATED: The RabbitMQ userid. (string value) +# Deprecated group/name - [DEFAULT]/rabbit_userid +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Replaced by [DEFAULT]/transport_url +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_userid +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_userid }}#{{ end }}rabbit_userid = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_userid | default "guest" }} + +# DEPRECATED: The RabbitMQ password. (string value) +# Deprecated group/name - [DEFAULT]/rabbit_password +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Replaced by [DEFAULT]/transport_url +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_password +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_password }}#{{ end }}rabbit_password = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_password | default "guest" }} + +# The RabbitMQ login method. (string value) +# Deprecated group/name - [DEFAULT]/rabbit_login_method +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_login_method +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_login_method }}#{{ end }}rabbit_login_method = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_login_method | default "AMQPLAIN" }} + +# DEPRECATED: The RabbitMQ virtual host. (string value) +# Deprecated group/name - [DEFAULT]/rabbit_virtual_host +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# Reason: Replaced by [DEFAULT]/transport_url +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_virtual_host +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_virtual_host }}#{{ end }}rabbit_virtual_host = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_virtual_host | default "/" }} + +# How frequently to retry connecting with RabbitMQ. (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_interval +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_interval }}#{{ end }}rabbit_retry_interval = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_interval | default "1" }} + +# How long to backoff for between retries when connecting to RabbitMQ. (integer +# value) +# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_backoff +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_backoff }}#{{ end }}rabbit_retry_backoff = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_retry_backoff | default "2" }} + +# Maximum interval of RabbitMQ connection retries. Default is 30 seconds. +# (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_interval_max +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_interval_max }}#{{ end }}rabbit_interval_max = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_interval_max | default "30" }} + +# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0 +# (infinite retry count). (integer value) +# Deprecated group/name - [DEFAULT]/rabbit_max_retries +# This option is deprecated for removal. +# Its value may be silently ignored in the future. +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_max_retries +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_max_retries }}#{{ end }}rabbit_max_retries = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_max_retries | default "0" }} + +# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this +# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring +# is no longer controlled by the x-ha-policy argument when declaring a queue. If +# you just want to make sure that all queues (except those with auto-generated +# names) are mirrored across all nodes, run: "rabbitmqctl set_policy HA +# '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value) +# Deprecated group/name - [DEFAULT]/rabbit_ha_queues +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_ha_queues +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_ha_queues }}#{{ end }}rabbit_ha_queues = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_ha_queues | default "false" }} + +# Positive integer representing duration in seconds for queue TTL (x-expires). +# Queues which are unused for the duration of the TTL are automatically deleted. +# The parameter affects only reply and fanout queues. (integer value) +# Minimum value: 1 +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_transient_queues_ttl +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_transient_queues_ttl }}#{{ end }}rabbit_transient_queues_ttl = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_transient_queues_ttl | default "1800" }} + +# Specifies the number of messages to prefetch. Setting to zero allows unlimited +# messages. (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.rabbit_qos_prefetch_count +{{ if not .oslo_messaging_rabbit.oslo.messaging.rabbit_qos_prefetch_count }}#{{ end }}rabbit_qos_prefetch_count = {{ .oslo_messaging_rabbit.oslo.messaging.rabbit_qos_prefetch_count | default "0" }} + +# Number of seconds after which the Rabbit broker is considered down if +# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer +# value) +# from .oslo_messaging_rabbit.oslo.messaging.heartbeat_timeout_threshold +{{ if not .oslo_messaging_rabbit.oslo.messaging.heartbeat_timeout_threshold }}#{{ end }}heartbeat_timeout_threshold = {{ .oslo_messaging_rabbit.oslo.messaging.heartbeat_timeout_threshold | default "60" }} + +# How often times during the heartbeat_timeout_threshold we check the heartbeat. +# (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.heartbeat_rate +{{ if not .oslo_messaging_rabbit.oslo.messaging.heartbeat_rate }}#{{ end }}heartbeat_rate = {{ .oslo_messaging_rabbit.oslo.messaging.heartbeat_rate | default "2" }} + +# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value) +# Deprecated group/name - [DEFAULT]/fake_rabbit +# from .oslo_messaging_rabbit.oslo.messaging.fake_rabbit +{{ if not .oslo_messaging_rabbit.oslo.messaging.fake_rabbit }}#{{ end }}fake_rabbit = {{ .oslo_messaging_rabbit.oslo.messaging.fake_rabbit | default "false" }} + +# Maximum number of channels to allow (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.channel_max +{{ if not .oslo_messaging_rabbit.oslo.messaging.channel_max }}#{{ end }}channel_max = {{ .oslo_messaging_rabbit.oslo.messaging.channel_max | default "" }} + +# The maximum byte size for an AMQP frame (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.frame_max +{{ if not .oslo_messaging_rabbit.oslo.messaging.frame_max }}#{{ end }}frame_max = {{ .oslo_messaging_rabbit.oslo.messaging.frame_max | default "" }} + +# How often to send heartbeats for consumer's connections (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.heartbeat_interval +{{ if not .oslo_messaging_rabbit.oslo.messaging.heartbeat_interval }}#{{ end }}heartbeat_interval = {{ .oslo_messaging_rabbit.oslo.messaging.heartbeat_interval | default "3" }} + +# Enable SSL (boolean value) +# from .oslo_messaging_rabbit.oslo.messaging.ssl +{{ if not .oslo_messaging_rabbit.oslo.messaging.ssl }}#{{ end }}ssl = {{ .oslo_messaging_rabbit.oslo.messaging.ssl | default "" }} + +# Arguments passed to ssl.wrap_socket (dict value) +# from .oslo_messaging_rabbit.oslo.messaging.ssl_options +{{ if not .oslo_messaging_rabbit.oslo.messaging.ssl_options }}#{{ end }}ssl_options = {{ .oslo_messaging_rabbit.oslo.messaging.ssl_options | default "" }} + +# Set socket timeout in seconds for connection's socket (floating point value) +# from .oslo_messaging_rabbit.oslo.messaging.socket_timeout +{{ if not .oslo_messaging_rabbit.oslo.messaging.socket_timeout }}#{{ end }}socket_timeout = {{ .oslo_messaging_rabbit.oslo.messaging.socket_timeout | default "0.25" }} + +# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point value) +# from .oslo_messaging_rabbit.oslo.messaging.tcp_user_timeout +{{ if not .oslo_messaging_rabbit.oslo.messaging.tcp_user_timeout }}#{{ end }}tcp_user_timeout = {{ .oslo_messaging_rabbit.oslo.messaging.tcp_user_timeout | default "0.25" }} + +# Set delay for reconnection to some host which has connection error (floating +# point value) +# from .oslo_messaging_rabbit.oslo.messaging.host_connection_reconnect_delay +{{ if not .oslo_messaging_rabbit.oslo.messaging.host_connection_reconnect_delay }}#{{ end }}host_connection_reconnect_delay = {{ .oslo_messaging_rabbit.oslo.messaging.host_connection_reconnect_delay | default "0.25" }} + +# Connection factory implementation (string value) +# Allowed values: new, single, read_write +# from .oslo_messaging_rabbit.oslo.messaging.connection_factory +{{ if not .oslo_messaging_rabbit.oslo.messaging.connection_factory }}#{{ end }}connection_factory = {{ .oslo_messaging_rabbit.oslo.messaging.connection_factory | default "single" }} + +# Maximum number of connections to keep queued. (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.pool_max_size +{{ if not .oslo_messaging_rabbit.oslo.messaging.pool_max_size }}#{{ end }}pool_max_size = {{ .oslo_messaging_rabbit.oslo.messaging.pool_max_size | default "30" }} + +# Maximum number of connections to create above `pool_max_size`. (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.pool_max_overflow +{{ if not .oslo_messaging_rabbit.oslo.messaging.pool_max_overflow }}#{{ end }}pool_max_overflow = {{ .oslo_messaging_rabbit.oslo.messaging.pool_max_overflow | default "0" }} + +# Default number of seconds to wait for a connections to available (integer +# value) +# from .oslo_messaging_rabbit.oslo.messaging.pool_timeout +{{ if not .oslo_messaging_rabbit.oslo.messaging.pool_timeout }}#{{ end }}pool_timeout = {{ .oslo_messaging_rabbit.oslo.messaging.pool_timeout | default "30" }} + +# Lifetime of a connection (since creation) in seconds or None for no recycling. +# Expired connections are closed on acquire. (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.pool_recycle +{{ if not .oslo_messaging_rabbit.oslo.messaging.pool_recycle }}#{{ end }}pool_recycle = {{ .oslo_messaging_rabbit.oslo.messaging.pool_recycle | default "600" }} + +# Threshold at which inactive (since release) connections are considered stale +# in seconds or None for no staleness. Stale connections are closed on acquire. +# (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.pool_stale +{{ if not .oslo_messaging_rabbit.oslo.messaging.pool_stale }}#{{ end }}pool_stale = {{ .oslo_messaging_rabbit.oslo.messaging.pool_stale | default "60" }} + +# Persist notification messages. (boolean value) +# from .oslo_messaging_rabbit.oslo.messaging.notification_persistence +{{ if not .oslo_messaging_rabbit.oslo.messaging.notification_persistence }}#{{ end }}notification_persistence = {{ .oslo_messaging_rabbit.oslo.messaging.notification_persistence | default "false" }} + +# Exchange name for sending notifications (string value) +# from .oslo_messaging_rabbit.oslo.messaging.default_notification_exchange +{{ if not .oslo_messaging_rabbit.oslo.messaging.default_notification_exchange }}#{{ end }}default_notification_exchange = {{ .oslo_messaging_rabbit.oslo.messaging.default_notification_exchange | default "${control_exchange}_notification" }} + +# Max number of not acknowledged message which RabbitMQ can send to notification +# listener. (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.notification_listener_prefetch_count +{{ if not .oslo_messaging_rabbit.oslo.messaging.notification_listener_prefetch_count }}#{{ end }}notification_listener_prefetch_count = {{ .oslo_messaging_rabbit.oslo.messaging.notification_listener_prefetch_count | default "100" }} + +# Reconnecting retry count in case of connectivity problem during sending +# notification, -1 means infinite retry. (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.default_notification_retry_attempts +{{ if not .oslo_messaging_rabbit.oslo.messaging.default_notification_retry_attempts }}#{{ end }}default_notification_retry_attempts = {{ .oslo_messaging_rabbit.oslo.messaging.default_notification_retry_attempts | default "-1" }} + +# Reconnecting retry delay in case of connectivity problem during sending +# notification message (floating point value) +# from .oslo_messaging_rabbit.oslo.messaging.notification_retry_delay +{{ if not .oslo_messaging_rabbit.oslo.messaging.notification_retry_delay }}#{{ end }}notification_retry_delay = {{ .oslo_messaging_rabbit.oslo.messaging.notification_retry_delay | default "0.25" }} + +# Time to live for rpc queues without consumers in seconds. (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.rpc_queue_expiration +{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_queue_expiration }}#{{ end }}rpc_queue_expiration = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_queue_expiration | default "60" }} + +# Exchange name for sending RPC messages (string value) +# from .oslo_messaging_rabbit.oslo.messaging.default_rpc_exchange +{{ if not .oslo_messaging_rabbit.oslo.messaging.default_rpc_exchange }}#{{ end }}default_rpc_exchange = {{ .oslo_messaging_rabbit.oslo.messaging.default_rpc_exchange | default "${control_exchange}_rpc" }} + +# Exchange name for receiving RPC replies (string value) +# from .oslo_messaging_rabbit.oslo.messaging.rpc_reply_exchange +{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_reply_exchange }}#{{ end }}rpc_reply_exchange = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_reply_exchange | default "${control_exchange}_rpc_reply" }} + +# Max number of not acknowledged message which RabbitMQ can send to rpc +# listener. (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.rpc_listener_prefetch_count +{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_listener_prefetch_count }}#{{ end }}rpc_listener_prefetch_count = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_listener_prefetch_count | default "100" }} + +# Max number of not acknowledged message which RabbitMQ can send to rpc reply +# listener. (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.rpc_reply_listener_prefetch_count +{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_reply_listener_prefetch_count }}#{{ end }}rpc_reply_listener_prefetch_count = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_reply_listener_prefetch_count | default "100" }} + +# Reconnecting retry count in case of connectivity problem during sending reply. +# -1 means infinite retry during rpc_timeout (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_attempts +{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_attempts }}#{{ end }}rpc_reply_retry_attempts = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_attempts | default "-1" }} + +# Reconnecting retry delay in case of connectivity problem during sending reply. +# (floating point value) +# from .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_delay +{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_delay }}#{{ end }}rpc_reply_retry_delay = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_reply_retry_delay | default "0.25" }} + +# Reconnecting retry count in case of connectivity problem during sending RPC +# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc +# request could be processed more then one time (integer value) +# from .oslo_messaging_rabbit.oslo.messaging.default_rpc_retry_attempts +{{ if not .oslo_messaging_rabbit.oslo.messaging.default_rpc_retry_attempts }}#{{ end }}default_rpc_retry_attempts = {{ .oslo_messaging_rabbit.oslo.messaging.default_rpc_retry_attempts | default "-1" }} + +# Reconnecting retry delay in case of connectivity problem during sending RPC +# message (floating point value) +# from .oslo_messaging_rabbit.oslo.messaging.rpc_retry_delay +{{ if not .oslo_messaging_rabbit.oslo.messaging.rpc_retry_delay }}#{{ end }}rpc_retry_delay = {{ .oslo_messaging_rabbit.oslo.messaging.rpc_retry_delay | default "0.25" }} + + +[oslo_messaging_zmq] + +# +# From oslo.messaging +# + +# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. +# The "host" option should point or resolve to this address. (string value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address +# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_address +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_address }}#{{ end }}rpc_zmq_bind_address = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_address | default "*" }} + +# MatchMaker driver. (string value) +# Allowed values: redis, dummy +# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker +# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_matchmaker +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_matchmaker }}#{{ end }}rpc_zmq_matchmaker = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_matchmaker | default "redis" }} + +# Number of ZeroMQ contexts, defaults to 1. (integer value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts +# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_contexts +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_contexts }}#{{ end }}rpc_zmq_contexts = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_contexts | default "1" }} + +# Maximum number of ingress messages to locally buffer per topic. Default is +# unlimited. (integer value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog +# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_topic_backlog +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_topic_backlog }}#{{ end }}rpc_zmq_topic_backlog = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_topic_backlog | default "" }} + +# Directory for holding IPC sockets. (string value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir +# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_ipc_dir +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_ipc_dir }}#{{ end }}rpc_zmq_ipc_dir = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_ipc_dir | default "/var/run/openstack" }} + +# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match +# "host" option, if running Nova. (string value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_host +# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_host +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_host }}#{{ end }}rpc_zmq_host = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_host | default "localhost" }} + +# Seconds to wait before a cast expires (TTL). The default value of -1 specifies +# an infinite linger period. The value of 0 specifies no linger period. Pending +# messages shall be discarded immediately when the socket is closed. Only +# supported by impl_zmq. (integer value) +# Deprecated group/name - [DEFAULT]/rpc_cast_timeout +# from .oslo_messaging_zmq.oslo.messaging.rpc_cast_timeout +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_cast_timeout }}#{{ end }}rpc_cast_timeout = {{ .oslo_messaging_zmq.oslo.messaging.rpc_cast_timeout | default "-1" }} + +# The default number of seconds that poll should wait. Poll raises timeout +# exception when timeout expired. (integer value) +# Deprecated group/name - [DEFAULT]/rpc_poll_timeout +# from .oslo_messaging_zmq.oslo.messaging.rpc_poll_timeout +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_poll_timeout }}#{{ end }}rpc_poll_timeout = {{ .oslo_messaging_zmq.oslo.messaging.rpc_poll_timeout | default "1" }} + +# Expiration timeout in seconds of a name service record about existing target ( +# < 0 means no timeout). (integer value) +# Deprecated group/name - [DEFAULT]/zmq_target_expire +# from .oslo_messaging_zmq.oslo.messaging.zmq_target_expire +{{ if not .oslo_messaging_zmq.oslo.messaging.zmq_target_expire }}#{{ end }}zmq_target_expire = {{ .oslo_messaging_zmq.oslo.messaging.zmq_target_expire | default "300" }} + +# Update period in seconds of a name service record about existing target. +# (integer value) +# Deprecated group/name - [DEFAULT]/zmq_target_update +# from .oslo_messaging_zmq.oslo.messaging.zmq_target_update +{{ if not .oslo_messaging_zmq.oslo.messaging.zmq_target_update }}#{{ end }}zmq_target_update = {{ .oslo_messaging_zmq.oslo.messaging.zmq_target_update | default "180" }} + +# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean +# value) +# Deprecated group/name - [DEFAULT]/use_pub_sub +# from .oslo_messaging_zmq.oslo.messaging.use_pub_sub +{{ if not .oslo_messaging_zmq.oslo.messaging.use_pub_sub }}#{{ end }}use_pub_sub = {{ .oslo_messaging_zmq.oslo.messaging.use_pub_sub | default "true" }} + +# Use ROUTER remote proxy. (boolean value) +# Deprecated group/name - [DEFAULT]/use_router_proxy +# from .oslo_messaging_zmq.oslo.messaging.use_router_proxy +{{ if not .oslo_messaging_zmq.oslo.messaging.use_router_proxy }}#{{ end }}use_router_proxy = {{ .oslo_messaging_zmq.oslo.messaging.use_router_proxy | default "true" }} + +# Minimal port number for random ports range. (port value) +# Minimum value: 0 +# Maximum value: 65535 +# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port +# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_min_port +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_min_port }}#{{ end }}rpc_zmq_min_port = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_min_port | default "49153" }} + +# Maximal port number for random ports range. (integer value) +# Minimum value: 1 +# Maximum value: 65536 +# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port +# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_max_port +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_max_port }}#{{ end }}rpc_zmq_max_port = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_max_port | default "65536" }} + +# Number of retries to find free port number before fail with ZMQBindError. +# (integer value) +# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries +# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_port_retries +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_port_retries }}#{{ end }}rpc_zmq_bind_port_retries = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_bind_port_retries | default "100" }} + +# Default serialization mechanism for serializing/deserializing +# outgoing/incoming messages (string value) +# Allowed values: json, msgpack +# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization +# from .oslo_messaging_zmq.oslo.messaging.rpc_zmq_serialization +{{ if not .oslo_messaging_zmq.oslo.messaging.rpc_zmq_serialization }}#{{ end }}rpc_zmq_serialization = {{ .oslo_messaging_zmq.oslo.messaging.rpc_zmq_serialization | default "json" }} + +# This option configures round-robin mode in zmq socket. True means not keeping +# a queue when server side disconnects. False means to keep queue and messages +# even if server is disconnected, when the server appears we send all +# accumulated messages to it. (boolean value) +# from .oslo_messaging_zmq.oslo.messaging.zmq_immediate +{{ if not .oslo_messaging_zmq.oslo.messaging.zmq_immediate }}#{{ end }}zmq_immediate = {{ .oslo_messaging_zmq.oslo.messaging.zmq_immediate | default "false" }} + + +[oslo_policy] + +# +# From oslo.policy +# + +# The JSON file that defines policies. (string value) +# Deprecated group/name - [DEFAULT]/policy_file +# from .oslo_policy.oslo.policy.policy_file +{{ if not .oslo_policy.oslo.policy.policy_file }}#{{ end }}policy_file = {{ .oslo_policy.oslo.policy.policy_file | default "policy.json" }} + +# Default rule. Enforced when a requested rule is not found. (string value) +# Deprecated group/name - [DEFAULT]/policy_default_rule +# from .oslo_policy.oslo.policy.policy_default_rule +{{ if not .oslo_policy.oslo.policy.policy_default_rule }}#{{ end }}policy_default_rule = {{ .oslo_policy.oslo.policy.policy_default_rule | default "default" }} + +# Directories where policy configuration files are stored. They can be relative +# to any directory in the search path defined by the config_dir option, or +# absolute paths. The file defined by policy_file must exist for these +# directories to be searched. Missing or empty directories are ignored. (multi +# valued) +# Deprecated group/name - [DEFAULT]/policy_dirs +# from .oslo_policy.oslo.policy.policy_dirs (multiopt) +{{ if not .oslo_policy.oslo.policy.policy_dirs }}#policy_dirs = {{ .oslo_policy.oslo.policy.policy_dirs | default "policy.d" }}{{ else }}{{ range .oslo_policy.oslo.policy.policy_dirs }}policy_dirs = {{ . }}{{ end }}{{ end }} + + +[paste_deploy] + +# +# From glance.registry +# + +# +# Deployment flavor to use in the server application pipeline. +# +# Provide a string value representing the appropriate deployment +# flavor used in the server application pipleline. This is typically +# the partial name of a pipeline in the paste configuration file with +# the service name removed. +# +# For example, if your paste section name in the paste configuration +# file is [pipeline:glance-api-keystone], set ``flavor`` to +# ``keystone``. +# +# Possible values: +# * String value representing a partial pipeline name. +# +# Related Options: +# * config_file +# +# (string value) +# from .paste_deploy.glance.registry.flavor +{{ if not .paste_deploy.glance.registry.flavor }}#{{ end }}flavor = {{ .paste_deploy.glance.registry.flavor | default "keystone" }} + +# +# Name of the paste configuration file. +# +# Provide a string value representing the name of the paste +# configuration file to use for configuring piplelines for +# server application deployments. +# +# NOTES: +# * Provide the name or the path relative to the glance directory +# for the paste configuration file and not the absolute path. +# * The sample paste configuration file shipped with Glance need +# not be edited in most cases as it comes with ready-made +# pipelines for all common deployment flavors. +# +# If no value is specified for this option, the ``paste.ini`` file +# with the prefix of the corresponding Glance service's configuration +# file name will be searched for in the known configuration +# directories. (For example, if this option is missing from or has no +# value set in ``glance-api.conf``, the service will look for a file +# named ``glance-api-paste.ini``.) If the paste configuration file is +# not found, the service will not start. +# +# Possible values: +# * A string value representing the name of the paste configuration +# file. +# +# Related Options: +# * flavor +# +# (string value) +# from .paste_deploy.glance.registry.config_file +{{ if not .paste_deploy.glance.registry.config_file }}#{{ end }}config_file = {{ .paste_deploy.glance.registry.config_file | default "glance-api-paste.ini" }} + + +[profiler] + +# +# From glance.registry +# + +# +# Enables the profiling for all services on this node. Default value is False +# (fully disable the profiling feature). +# +# Possible values: +# +# * True: Enables the feature +# * False: Disables the feature. The profiling cannot be started via this +# project +# operations. If the profiling is triggered by another project, this project +# part +# will be empty. +# (boolean value) +# Deprecated group/name - [profiler]/profiler_enabled +# from .profiler.glance.registry.enabled +{{ if not .profiler.glance.registry.enabled }}#{{ end }}enabled = {{ .profiler.glance.registry.enabled | default "false" }} + +# +# Enables SQL requests profiling in services. Default value is False (SQL +# requests won't be traced). +# +# Possible values: +# +# * True: Enables SQL requests profiling. Each SQL query will be part of the +# trace and can the be analyzed by how much time was spent for that. +# * False: Disables SQL requests profiling. The spent time is only shown on a +# higher level of operations. Single SQL queries cannot be analyzed this +# way. +# (boolean value) +# from .profiler.glance.registry.trace_sqlalchemy +{{ if not .profiler.glance.registry.trace_sqlalchemy }}#{{ end }}trace_sqlalchemy = {{ .profiler.glance.registry.trace_sqlalchemy | default "false" }} + +# +# Secret key(s) to use for encrypting context data for performance profiling. +# This string value should have the following format: [,,...], +# where each key is some random string. A user who triggers the profiling via +# the REST API has to set one of these keys in the headers of the REST API call +# to include profiling results of this node for this particular project. +# +# Both "enabled" flag and "hmac_keys" config options should be set to enable +# profiling. Also, to generate correct profiling information across all services +# at least one key needs to be consistent between OpenStack projects. This +# ensures it can be used from client side to generate the trace, containing +# information from all possible resources. (string value) +# from .profiler.glance.registry.hmac_keys +{{ if not .profiler.glance.registry.hmac_keys }}#{{ end }}hmac_keys = {{ .profiler.glance.registry.hmac_keys | default "SECRET_KEY" }} + +# +# Connection string for a notifier backend. Default value is messaging:// which +# sets the notifier to oslo_messaging. +# +# Examples of possible values: +# +# * messaging://: use oslo_messaging driver for sending notifications. +# (string value) +# from .profiler.glance.registry.connection_string +{{ if not .profiler.glance.registry.connection_string }}#{{ end }}connection_string = {{ .profiler.glance.registry.connection_string | default "messaging://" }} + +{{- end -}} diff --git a/glance/templates/pvc-images.yaml b/glance/templates/pvc-images.yaml new file mode 100644 index 0000000000..0d1d8663fc --- /dev/null +++ b/glance/templates/pvc-images.yaml @@ -0,0 +1,27 @@ +# Copyright 2017 The Openstack-Helm Authors. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +{{- if eq .Values.storage "file" }} +kind: PersistentVolumeClaim +apiVersion: v1 +metadata: + name: glance-images + annotations: + volume.beta.kubernetes.io/storage-class: general +spec: + accessModes: [ "ReadWriteOnce" ] + resources: + requests: + storage: 20Gi +{{- end }} diff --git a/glance/templates/secret-keystone-user.env.yaml b/glance/templates/secret-keystone-user.env.yaml index c446688ad6..3a1c94aac0 100644 --- a/glance/templates/secret-keystone-user.env.yaml +++ b/glance/templates/secret-keystone-user.env.yaml @@ -21,14 +21,14 @@ data: OS_AUTH_URL: | {{ tuple "identity" "internal" "api" . | include "helm-toolkit.keystone_endpoint_uri_lookup" | b64enc | indent 4 }} OS_REGION_NAME: | -{{ .Values.keystone.glance_region_name | b64enc | indent 4 }} +{{ .Values.conf.glance.keystone_authtoken.keystonemiddleware.auth_token.region_name | b64enc | indent 4 }} OS_PROJECT_DOMAIN_NAME: | -{{ .Values.keystone.glance_project_domain | b64enc | indent 4 }} +{{ .Values.conf.glance.keystone_authtoken.keystonemiddleware.auth_token.project_domain_name | b64enc | indent 4 }} OS_PROJECT_NAME: | -{{ .Values.keystone.glance_project_name | b64enc | indent 4 }} +{{ .Values.conf.glance.keystone_authtoken.keystonemiddleware.auth_token.project_name | b64enc | indent 4 }} OS_USER_DOMAIN_NAME: | -{{ .Values.keystone.glance_user_domain | b64enc | indent 4 }} +{{ .Values.conf.glance.keystone_authtoken.keystonemiddleware.auth_token.user_domain_name | b64enc | indent 4 }} OS_USERNAME: | -{{ .Values.keystone.glance_user | b64enc | indent 4 }} +{{ .Values.conf.glance.keystone_authtoken.keystonemiddleware.auth_token.username | b64enc | indent 4 }} OS_PASSWORD: | -{{ .Values.keystone.glance_password | b64enc | indent 4 }} +{{ .Values.conf.glance.keystone_authtoken.keystonemiddleware.auth_token.password | b64enc | indent 4 }} diff --git a/glance/templates/service-api.yaml b/glance/templates/service-api.yaml index 43469ac8fa..1e1250fcec 100644 --- a/glance/templates/service-api.yaml +++ b/glance/templates/service-api.yaml @@ -18,7 +18,7 @@ metadata: name: glance-api spec: ports: - - port: {{ .Values.network.api.port }} + - port: {{ .Values.conf.glance.default.glance.api.bind_port }} {{ if .Values.network.api.node_port.enabled }} nodePort: .Values.network.api.node_port.port {{ end }} diff --git a/glance/templates/service-registry.yaml b/glance/templates/service-registry.yaml index 30f1c8c270..b093515109 100644 --- a/glance/templates/service-registry.yaml +++ b/glance/templates/service-registry.yaml @@ -18,7 +18,7 @@ metadata: name: glance-registry spec: ports: - - port: {{ .Values.network.registry.port }} + - port: {{ .Values.conf.glance_registry.default.glance.registry.bind_port }} {{ if .Values.network.registry.node_port.enabled }} nodePort: {{ .Values.network.register.node_port.port }} {{ end }} diff --git a/glance/values.yaml b/glance/values.yaml index 38cf536960..ad2692d65b 100644 --- a/glance/values.yaml +++ b/glance/values.yaml @@ -21,9 +21,7 @@ replicas: api: 1 registry: 1 -development: - enabled: false - storage_path: /var/lib/localkube/openstack-helm/glance/images +storage: ceph labels: node_selector_key: openstack-control-plane @@ -69,25 +67,79 @@ keystone: admin_project_name: "admin" admin_project_domain: "default" admin_region_name: "RegionOne" - - glance_user: "glance" - glance_user_domain: "default" glance_user_role: "admin" - glance_password: "password" - glance_project_name: "service" - glance_project_domain: "default" - glance_region_name: "RegionOne" + + +conf: + ceph: + override: + append: + ceph_client: + override: + append: + paste: + override: + append: + policy: + override: + append: + glance: + override: + append: + default: + glance: + api: + bind_port: 9292 + keystone_authtoken: + keystonemiddleware: + auth_token: + auth_type: password + auth_version: v3 + region_name: RegionOne + project_domain_name: default + project_name: service + user_domain_name: default + username: glance + password: password + glance_store: + glance: + store: + stores: file, http, rbd + default_store: rbd + rbd_store_chunk_size: 8 + rbd_store_pool: images + rbd_store_user: admin + rbd_store_ceph_conf: /etc/ceph/ceph.conf + paste_registry: + override: + append: + glance_registry: + override: + append: + default: + glance: + registry: + bind_port: 9191 + keystone_authtoken: + keystonemiddleware: + auth_token: + auth_type: password + auth_version: v3 + region_name: RegionOne + project_domain_name: default + project_name: service + user_domain_name: default + username: glance + password: password network: api: name: "glance-api" - port: 9292 node_port: enabled: false port: 30092 registry: name: "glance-registry" - port: 9191 node_port: enabled: false port: 30091 @@ -95,8 +147,6 @@ network: ceph: enabled: true monitors: [] - glance_user: "admin" - glance_pool: "images" # a null value for the keyring will # attempt to use the key from # common/secrets/ceph-client-key @@ -221,7 +271,14 @@ endpoints: scheme: 'http' port: api: 9292 - registry: 9191 + image_registry: + name: glance-registry + hosts: + default: glance-registry + path: null + scheme: 'http' + port: + api: 9191 oslo_db: auth: admin: @@ -236,3 +293,22 @@ endpoints: scheme: mysql+pymysql port: mysql: 3306 + oslo_cache: + hosts: + default: memcache + port: + memcache: 11211 + oslo_messaging: + auth: + admin: + username: admin + password: password + user: + username: rabbitmq + password: password + hosts: + default: rabbitmq + path: / + scheme: rabbit + port: + amqp: 5672