openstack-helm/tools/deployment/multinode/900-use-it.sh

#!/bin/bash

#    Licensed under the Apache License, Version 2.0 (the "License"); you may
#    not use this file except in compliance with the License. You may obtain
#    a copy of the License at
#
#         http://www.apache.org/licenses/LICENSE-2.0
#
#    Unless required by applicable law or agreed to in writing, software
#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
#    License for the specific language governing permissions and limitations
#    under the License.
set -xe

export OS_CLOUD=openstack_helm

: ${OSH_EXT_NET_NAME:="public"}
: ${OSH_EXT_SUBNET_NAME:="public-subnet"}
: ${OSH_EXT_SUBNET:="172.24.4.0/24"}
: ${OSH_BR_EX_ADDR:="172.24.4.1/24"}
openstack stack create --wait \
  --parameter network_name=${OSH_EXT_NET_NAME} \
  --parameter physical_network_name=public \
  --parameter subnet_name=${OSH_EXT_SUBNET_NAME} \
  --parameter subnet_cidr=${OSH_EXT_SUBNET} \
  --parameter subnet_gateway=${OSH_BR_EX_ADDR%/*} \
  -t ./tools/gate/files/heat-public-net-deployment.yaml \
  heat-public-net-deployment

: ${OSH_PRIVATE_SUBNET_POOL:="10.0.0.0/8"}
: ${OSH_PRIVATE_SUBNET_POOL_NAME:="shared-default-subnetpool"}
: ${OSH_PRIVATE_SUBNET_POOL_DEF_PREFIX:="24"}
openstack stack create --wait \
  --parameter subnet_pool_name=${OSH_PRIVATE_SUBNET_POOL_NAME} \
  --parameter subnet_pool_prefixes=${OSH_PRIVATE_SUBNET_POOL} \
  --parameter subnet_pool_default_prefix_length=${OSH_PRIVATE_SUBNET_POOL_DEF_PREFIX} \
  -t ./tools/gate/files/heat-subnet-pool-deployment.yaml \
  heat-subnet-pool-deployment

: ${OSH_EXT_NET_NAME:="public"}
: ${OSH_VM_KEY_STACK:="heat-vm-key"}
: ${OSH_PRIVATE_SUBNET:="10.0.0.0/24"}
# NOTE(portdirect): We do this fancy, and seemingly pointless, footwork to get
# the full image name for the cirros Image without having to be explicit.
IMAGE_NAME=$(openstack image show -f value -c name \
  $(openstack image list -f csv | awk -F ',' '{ print $2 "," $1 }' | \
    grep "^\"Cirros" | head -1 | awk -F ',' '{ print $2 }' | tr -d '"'))

# Setup SSH Keypair in Nova
mkdir -p ${HOME}/.ssh
openstack keypair create --private-key ${HOME}/.ssh/osh_key ${OSH_VM_KEY_STACK}
chmod 600 ${HOME}/.ssh/osh_key

openstack stack create --wait \
    --parameter public_net=${OSH_EXT_NET_NAME} \
    --parameter image="${IMAGE_NAME}" \
    --parameter ssh_key=${OSH_VM_KEY_STACK} \
    --parameter cidr=${OSH_PRIVATE_SUBNET} \
    --parameter dns_nameserver=${OSH_BR_EX_ADDR%/*} \
    -t ./tools/gate/files/heat-basic-vm-deployment.yaml \
    heat-basic-vm-deployment

if ! openstack server list -c Status -f value | grep -q "ACTIVE"; then
  echo "VM is not active"
  openstack server list --long
  exit -1
fi

# The following checks the connictivity of the VM created.
# The networking for multinode needs to be enhance to be able to run the
# following code. Hence commenting this code out.
#
# FLOATING_IP=$(openstack stack output show \
#     heat-basic-vm-deployment \
#     floating_ip \
#     -f value -c output_value)
#
# function wait_for_ssh_port {
#   # Default wait timeout is 300 seconds
#   set +x
#   end=$(date +%s)
#   if ! [ -z $2 ]; then
#    end=$((end + $2))
#   else
#    end=$((end + 300))
#   fi
#   while true; do
#       # Use Nmap as its the same on Ubuntu and RHEL family distros
#       nmap -Pn -p22 $1 | awk '$1 ~ /22/ {print $2}' | grep -q 'open' && \
#           break || true
#       sleep 1
#       now=$(date +%s)
#       [ $now -gt $end ] && echo "Could not connect to $1 port 22 in time" && exit -1
#   done
#   set -x
# }
# wait_for_ssh_port $FLOATING_IP
#
# # SSH into the VM and check it can reach the outside world
# ssh-keyscan "$FLOATING_IP" >> ~/.ssh/known_hosts
# ssh -i ${HOME}/.ssh/osh_key cirros@${FLOATING_IP} ping -q -c 1 -W 2 ${OSH_BR_EX_ADDR%/*}
#
# # Check the VM can reach the metadata server
# ssh -i ${HOME}/.ssh/osh_key cirros@${FLOATING_IP} curl --verbose --connect-timeout 5 169.254.169.254
#
# # Check the VM can reach the keystone server
# ssh -i ${HOME}/.ssh/osh_key cirros@${FLOATING_IP} curl --verbose --connect-timeout 5 keystone.openstack.svc.cluster.local
#
# # Check to see if cinder has been deployed, if it has then perform a volume attach.
# if openstack service list -f value -c Type | grep -q "^volume"; then
#   INSTANCE_ID=$(openstack stack output show \
#       heat-basic-vm-deployment \
#       instance_uuid \
#       -f value -c output_value)
#
#   # Get the devices that are present on the instance
#   DEVS_PRE_ATTACH=$(mktemp)
#   ssh -i ${HOME}/.ssh/osh_key cirros@${FLOATING_IP} lsblk > ${DEVS_PRE_ATTACH}
#
#   # Create and attach a block device to the instance
#   openstack stack create --wait \
#     --parameter instance_uuid=${INSTANCE_ID} \
#     -t ./tools/gate/files/heat-vm-volume-attach.yaml \
#     heat-vm-volume-attach
#
#   # Get the devices that are present on the instance
#   DEVS_POST_ATTACH=$(mktemp)
#   ssh -i ${HOME}/.ssh/osh_key cirros@${FLOATING_IP} lsblk > ${DEVS_POST_ATTACH}
#
#   # Check that we have the expected number of extra devices on the instance post attach
#   if ! [ "$(comm -13 ${DEVS_PRE_ATTACH} ${DEVS_POST_ATTACH} | wc -l)" -eq "1" ]; then
#     echo "Volume not successfully attached"
#     exit 1
#   fi
# fi