------------- Oslo Rootwrap ------------- The Oslo Rootwrap allows fine filtering of shell commands to run as `root` from OpenStack services. Rootwrap should be used as a separate Python process calling the oslo.rootwrap.cmd:main function. You can set up a specific console_script calling into oslo.rootwrap.cmd:main, called for example `nova-rootwrap`. To keep things simple, this document will consider that your console_script is called `/usr/bin/nova-rootwrap`. The rootwrap command line should be called under `sudo`. It's first parameter is the configuration file to use, and the remainder of the parameters are the command line to execute: `sudo nova-rootwrap ROOTWRAP_CONFIG COMMAND_LINE` How rootwrap works ================== OpenStack services generally run under a specific, unprivileged user. However, sometimes they need to run a command as `root`. Instead of just calling `sudo make me a sandwich` and have a blanket `sudoers` permission to always escalate rights from their unprivileged users to `root`, those services can call `sudo nova-rootwrap /etc/nova/rootwrap.conf make me a sandwich`. A sudoers entry lets the unprivileged user run `nova-rootwrap` as `root`. `nova-rootwrap` looks for filter definition directories in its configuration file, and loads command filters from them. Then it checks if the command requested by the OpenStack service matches one of those filters, in which case it executes the command (as `root`). If no filter matches, it denies the request. This allows for complex filtering of allowed commands, as well as shipping filter definitions together with the OpenStack code that needs them. Security model ============== The escalation path is fully controlled by the `root` user. A `sudoers` entry (owned by `root`) allows the unprivileged user to run (as `root`) a specific rootwrap executable, and only with a specific configuration file (which should be owned by `root`) as its first parameter. `nova-rootwrap` imports the Python modules it needs from a cleaned (and system-default) `PYTHONPATH`. The configuration file points to root-owned filter definition directories, which contain root-owned filters definition files. This chain ensures that the unprivileged user itself is never in control of the configuration or modules used by the `nova-rootwrap` executable. Installation ============ All nodes wishing to run `nova-rootwrap` should contain a `sudoers` entry that lets the unprivileged user run `nova-rootwrap` as `root`, pointing to the root-owned `rootwrap.conf` configuration file and allowing any parameter after that. For example, Nova nodes should have this line in their `sudoers` file, to allow the `nova` user to call `sudo nova-rootwrap`: ``nova ALL = (root) NOPASSWD: /usr/bin/nova-rootwrap /etc/nova/rootwrap.conf *`` Then the node also should ship the filter definitions corresponding to its usage of `nova-rootwrap`. You should not install any other filters file on that node, otherwise you would allow extra unneeded commands to be run as `root`. The filter file(s) corresponding to the node must be installed in one of the filters_path directories. For example, on Nova compute nodes, you should only have `compute.filters` installed. The file should be owned and writeable only by the `root` user. Rootwrap configuration ====================== The `rootwrap.conf` file is used to influence how `nova-rootwrap` works. Since it's in the trusted security path, it needs to be owned and writeable only by the `root` user. Its location is specified in the `sudoers` entry, and must be provided on `nova-rootwrap` command line as its first argument. `rootwrap.conf` uses an *INI* file format with the following sections and parameters: [DEFAULT] section ----------------- filters_path Comma-separated list of directories containing filter definition files. All directories listed must be owned and only writeable by `root`. This is the only mandatory parameter. Example: ``filters_path=/etc/nova/rootwrap.d,/usr/share/nova/rootwrap`` exec_dirs Comma-separated list of directories to search executables in, in case filters do not explicitely specify a full path. If not specified, defaults to the system `PATH` environment variable. All directories listed must be owned and only writeable by `root`. Example: ``exec_dirs=/sbin,/usr/sbin,/bin,/usr/bin`` use_syslog Enable logging to syslog. Default value is False. Example: ``use_syslog=True`` use_syslog_rfc_format Enable RFC5424 compliant format for syslog (add APP-NAME before MSG part). Default value is False. Example: ``use_syslog_rfc_format=True`` syslog_log_facility Which syslog facility to use for syslog logging. Valid values include `auth`, `authpriv`, `syslog`, `user0`, `user1`... Default value is `syslog`. Example: ``syslog_log_facility=syslog`` syslog_log_level Which messages to log. `INFO` means log all usage, `ERROR` means only log unsuccessful attempts. Example: ``syslog_log_level=ERROR`` .filters files ============== Filters definition files contain lists of filters that `nova-rootwrap` will use to allow or deny a specific command. They are generally suffixed by `.filters`. Since they are in the trusted security path, they need to be owned and writeable only by the `root` user. Their location is specified in the `rootwrap.conf` file. It uses an *INI* file format with a `[Filters]` section and several lines, each with a unique parameter name (different for each filter you define): [Filters] section ----------------- filter_name (different for each filter) Comma-separated list containing first the Filter class to use, followed by that Filter arguments (which vary depending on the Filter class selected). Example: ``kpartx: CommandFilter, /sbin/kpartx, root`` Available filter classes ======================== CommandFilter ------------- Basic filter that only checks the executable called. Parameters are: 1. Executable allowed 2. User to run the command under Example: allow to run kpartx as the root user, with any parameters: ``kpartx: CommandFilter, kpartx, root`` RegExpFilter ------------ Generic filter that checks the executable called, then uses a list of regular expressions to check all subsequent arguments. Parameters are: 1. Executable allowed 2. User to run the command under 3. (and following) Regular expressions to use to match first (and subsequent) command arguments Example: allow to run `/usr/sbin/tunctl`, but only with three parameters with the first two being -b and -t: ``tunctl: /usr/sbin/tunctl, root, tunctl, -b, -t, .*`` PathFilter ---------- Generic filter that lets you check that paths provided as parameters fall under a given directory. Parameters are: 1. Executable allowed 2. User to run the command under 3. (and following) Command arguments. There are three types of command arguments: `pass` will accept any parameter value, a string will only accept the corresponding string as a parameter, except if the string starts with '/' in which case it will accept any path that resolves under the corresponding directory. Example: allow to chown to the 'nova' user any file under /var/lib/images: ``chown: PathFilter, /bin/chown, root, nova, /var/lib/images`` EnvFilter --------- Filter allowing extra environment variables to be set by the calling code. Parameters are: 1. `env` 2. User to run the command under 3. (and following) name of the environment variables that can be set, suffixed by `=` 4. Executable allowed Example: allow to run `CONFIG_FILE=foo NETWORK_ID=bar dnsmasq ...` as root: ``dnsmasq: EnvFilter, env, root, CONFIG_FILE=, NETWORK_ID=, dnsmasq`` ReadFileFilter -------------- Specific filter that lets you read files as `root` using `cat`. Parameters are: 1. Path to the file that you want to read as the `root` user. Example: allow to run `cat /etc/iscsi/initiatorname.iscsi` as `root`: ``read_initiator: ReadFileFilter, /etc/iscsi/initiatorname.iscsi`` KillFilter ---------- Kill-specific filter that checks the affected process and the signal sent before allowing the command. Parameters are: 1. User to run `kill` under 2. Only affect processes running that executable 3. (and following) Signals you're allowed to send Example: allow to send `-9` or `-HUP` signals to `/usr/sbin/dnsmasq` processes: ``kill_dnsmasq: KillFilter, root, /usr/sbin/dnsmasq, -9, -HUP`` IpFilter -------- ip-specific filter that allows to run any `ip` command, except for `ip netns` (in which case it only allows the list, add and delete subcommands). Parameters are: 1. `ip` 2. User to run `ip` under Example: allow to run any `ip` command except `ip netns exec` and `ip netns monitor`: ``ip: IpFilter, ip, root`` IpNetnsExecFilter ----------------- ip-specific filter that allows to run any otherwise-allowed command under `ip netns exec`. The command specified to `ip netns exec` must match another filter for this filter to accept it. Parameters are: 1. `ip` 2. User to run `ip` under Example: allow to run `ip netns exec ` as long as `` matches another filter: ``ip: IpNetnsExecFilter, ip, root`` ChainingRegExpFilter -------------------- Filter that allows to run the prefix command, if the beginning of its arguments match to a list of regular expressions, and if remaining arguments are any otherwise-allowed command. Parameters are: 1. Executable allowed 2. User to run the command under 3. (and following) Regular expressions to use to match first (and subsequent) command arguments. This filter regards the length of the regular expressions list as the number of arguments to be checked, and remaining parts are checked by other filters. Example: allow to run `/usr/bin/nice`, but only with first two parameters being -n and integer, and followed by any allowed command by the other filters: ``nice: /usr/bin/nice, root, nice, -n, -?\d+`` Note: this filter can't be used to impose that the subcommand is always run under the prefix command. In particular, it can't enforce that a particular command is only run under "nice", since the subcommand can explicitly be called directly. Calling rootwrap from OpenStack services ============================================= The `oslo.processutils` library ships with a convenience `execute()` function that can be used to call shell commands as `root`, if you call it with the following parameters: ``run_as_root=True`` ``root_helper='sudo nova-rootwrap /etc/nova/rootwrap.conf`` NB: Some services ship with a `utils.execute()` convenience function that automatically sets `root_helper` based on the value of a `rootwrap_config` parameter, so only `run_as_root=True` needs to be set. If you want to call as `root` a previously-unauthorized command, you will also need to modify the filters (generally shipped in the source tree under `etc/rootwrap.d` so that the command you want to run as `root` will actually be allowed by `nova-rootwrap`.