diff --git a/install-guide/source/initial-rings.rst b/install-guide/source/initial-rings.rst index 37ae3b17fd..d7d0378b68 100644 --- a/install-guide/source/initial-rings.rst +++ b/install-guide/source/initial-rings.rst @@ -36,7 +36,7 @@ The account server uses the account ring to maintain lists of containers. .. code-block:: console # swift-ring-builder account.builder \ - add --region 1 --zone 1 --ip STORAGE_NODE_MANAGEMENT_INTERFACE_IP_ADDRESS --port 6002 \ + add --region 1 --zone 1 --ip STORAGE_NODE_MANAGEMENT_INTERFACE_IP_ADDRESS --port 6202 \ --device DEVICE_NAME --weight DEVICE_WEIGHT Replace ``STORAGE_NODE_MANAGEMENT_INTERFACE_IP_ADDRESS`` with the IP address @@ -48,7 +48,7 @@ The account server uses the account ring to maintain lists of containers. .. code-block:: console # swift-ring-builder account.builder add \ - --region 1 --zone 1 --ip 10.0.0.51 --port 6002 --device sdb --weight 100 + --region 1 --zone 1 --ip 10.0.0.51 --port 6202 --device sdb --weight 100 Repeat this command for each storage device on each storage node. In the example architecture, use the command in four variations: @@ -56,17 +56,17 @@ The account server uses the account ring to maintain lists of containers. .. code-block:: console # swift-ring-builder account.builder add \ - --region 1 --zone 1 --ip 10.0.0.51 --port 6002 --device sdb --weight 100 - Device d0r1z1-10.0.0.51:6002R10.0.0.51:6002/sdb_"" with 100.0 weight got id 0 + --region 1 --zone 1 --ip 10.0.0.51 --port 6202 --device sdb --weight 100 + Device d0r1z1-10.0.0.51:6202R10.0.0.51:6202/sdb_"" with 100.0 weight got id 0 # swift-ring-builder account.builder add \ - --region 1 --zone 1 --ip 10.0.0.51 --port 6002 --device sdc --weight 100 - Device d1r1z2-10.0.0.51:6002R10.0.0.51:6002/sdc_"" with 100.0 weight got id 1 + --region 1 --zone 1 --ip 10.0.0.51 --port 6202 --device sdc --weight 100 + Device d1r1z2-10.0.0.51:6202R10.0.0.51:6202/sdc_"" with 100.0 weight got id 1 # swift-ring-builder account.builder add \ - --region 1 --zone 2 --ip 10.0.0.52 --port 6002 --device sdb --weight 100 - Device d2r1z3-10.0.0.52:6002R10.0.0.52:6002/sdb_"" with 100.0 weight got id 2 + --region 1 --zone 2 --ip 10.0.0.52 --port 6202 --device sdb --weight 100 + Device d2r1z3-10.0.0.52:6202R10.0.0.52:6202/sdb_"" with 100.0 weight got id 2 # swift-ring-builder account.builder add \ - --region 1 --zone 2 --ip 10.0.0.52 --port 6002 --device sdc --weight 100 - Device d3r1z4-10.0.0.52:6002R10.0.0.52:6002/sdc_"" with 100.0 weight got id 3 + --region 1 --zone 2 --ip 10.0.0.52 --port 6202 --device sdc --weight 100 + Device d3r1z4-10.0.0.52:6202R10.0.0.52:6202/sdc_"" with 100.0 weight got id 3 #. Verify the ring contents: @@ -78,10 +78,10 @@ The account server uses the account ring to maintain lists of containers. The minimum number of hours before a partition can be reassigned is 1 The overload factor is 0.00% (0.000000) Devices: id region zone ip address port replication ip replication port name weight partitions balance meta - 0 1 1 10.0.0.51 6002 10.0.0.51 6002 sdb 100.00 0 -100.00 - 1 1 1 10.0.0.51 6002 10.0.0.51 6002 sdc 100.00 0 -100.00 - 2 1 2 10.0.0.52 6002 10.0.0.52 6002 sdb 100.00 0 -100.00 - 3 1 2 10.0.0.52 6002 10.0.0.52 6002 sdc 100.00 0 -100.00 + 0 1 1 10.0.0.51 6202 10.0.0.51 6202 sdb 100.00 0 -100.00 + 1 1 1 10.0.0.51 6202 10.0.0.51 6202 sdc 100.00 0 -100.00 + 2 1 2 10.0.0.52 6202 10.0.0.52 6202 sdb 100.00 0 -100.00 + 3 1 2 10.0.0.52 6202 10.0.0.52 6202 sdc 100.00 0 -100.00 #. Rebalance the ring: @@ -113,7 +113,7 @@ However, it does not track object locations. .. code-block:: console # swift-ring-builder container.builder \ - add --region 1 --zone 1 --ip STORAGE_NODE_MANAGEMENT_INTERFACE_IP_ADDRESS --port 6001 \ + add --region 1 --zone 1 --ip STORAGE_NODE_MANAGEMENT_INTERFACE_IP_ADDRESS --port 6201 \ --device DEVICE_NAME --weight DEVICE_WEIGHT Replace ``STORAGE_NODE_MANAGEMENT_INTERFACE_IP_ADDRESS`` with the IP address @@ -125,7 +125,7 @@ However, it does not track object locations. .. code-block:: console # swift-ring-builder container.builder add \ - --region 1 --zone 1 --ip 10.0.0.51 --port 6001 --device sdb --weight 100 + --region 1 --zone 1 --ip 10.0.0.51 --port 6201 --device sdb --weight 100 Repeat this command for each storage device on each storage node. In the example architecture, use the command in four variations: @@ -133,17 +133,17 @@ However, it does not track object locations. .. code-block:: console # swift-ring-builder container.builder add \ - --region 1 --zone 1 --ip 10.0.0.51 --port 6001 --device sdb --weight 100 - Device d0r1z1-10.0.0.51:6001R10.0.0.51:6001/sdb_"" with 100.0 weight got id 0 + --region 1 --zone 1 --ip 10.0.0.51 --port 6201 --device sdb --weight 100 + Device d0r1z1-10.0.0.51:6201R10.0.0.51:6201/sdb_"" with 100.0 weight got id 0 # swift-ring-builder container.builder add \ - --region 1 --zone 1 --ip 10.0.0.51 --port 6001 --device sdc --weight 100 - Device d1r1z2-10.0.0.51:6001R10.0.0.51:6001/sdc_"" with 100.0 weight got id 1 + --region 1 --zone 1 --ip 10.0.0.51 --port 6201 --device sdc --weight 100 + Device d1r1z2-10.0.0.51:6201R10.0.0.51:6201/sdc_"" with 100.0 weight got id 1 # swift-ring-builder container.builder add \ - --region 1 --zone 2 --ip 10.0.0.52 --port 6001 --device sdb --weight 100 - Device d2r1z3-10.0.0.52:6001R10.0.0.52:6001/sdb_"" with 100.0 weight got id 2 + --region 1 --zone 2 --ip 10.0.0.52 --port 6201 --device sdb --weight 100 + Device d2r1z3-10.0.0.52:6201R10.0.0.52:6201/sdb_"" with 100.0 weight got id 2 # swift-ring-builder container.builder add \ - --region 1 --zone 2 --ip 10.0.0.52 --port 6001 --device sdc --weight 100 - Device d3r1z4-10.0.0.52:6001R10.0.0.52:6001/sdc_"" with 100.0 weight got id 3 + --region 1 --zone 2 --ip 10.0.0.52 --port 6201 --device sdc --weight 100 + Device d3r1z4-10.0.0.52:6201R10.0.0.52:6201/sdc_"" with 100.0 weight got id 3 #. Verify the ring contents: @@ -155,10 +155,10 @@ However, it does not track object locations. The minimum number of hours before a partition can be reassigned is 1 The overload factor is 0.00% (0.000000) Devices: id region zone ip address port replication ip replication port name weight partitions balance meta - 0 1 1 10.0.0.51 6001 10.0.0.51 6001 sdb 100.00 0 -100.00 - 1 1 1 10.0.0.51 6001 10.0.0.51 6001 sdc 100.00 0 -100.00 - 2 1 2 10.0.0.52 6001 10.0.0.52 6001 sdb 100.00 0 -100.00 - 3 1 2 10.0.0.52 6001 10.0.0.52 6001 sdc 100.00 0 -100.00 + 0 1 1 10.0.0.51 6201 10.0.0.51 6201 sdb 100.00 0 -100.00 + 1 1 1 10.0.0.51 6201 10.0.0.51 6201 sdc 100.00 0 -100.00 + 2 1 2 10.0.0.52 6201 10.0.0.52 6201 sdb 100.00 0 -100.00 + 3 1 2 10.0.0.52 6201 10.0.0.52 6201 sdc 100.00 0 -100.00 #. Rebalance the ring: @@ -190,7 +190,7 @@ on local devices. .. code-block:: console # swift-ring-builder object.builder \ - add --region 1 --zone 1 --ip STORAGE_NODE_MANAGEMENT_INTERFACE_IP_ADDRESS --port 6000 \ + add --region 1 --zone 1 --ip STORAGE_NODE_MANAGEMENT_INTERFACE_IP_ADDRESS --port 6200 \ --device DEVICE_NAME --weight DEVICE_WEIGHT Replace ``STORAGE_NODE_MANAGEMENT_INTERFACE_IP_ADDRESS`` with the IP address @@ -202,7 +202,7 @@ on local devices. .. code-block:: console # swift-ring-builder object.builder add \ - --region 1 --zone 1 --ip 10.0.0.51 --port 6000 --device sdb --weight 100 + --region 1 --zone 1 --ip 10.0.0.51 --port 6200 --device sdb --weight 100 Repeat this command for each storage device on each storage node. In the example architecture, use the command in four variations: @@ -210,17 +210,17 @@ on local devices. .. code-block:: console # swift-ring-builder object.builder add \ - --region 1 --zone 1 --ip 10.0.0.51 --port 6000 --device sdb --weight 100 - Device d0r1z1-10.0.0.51:6000R10.0.0.51:6000/sdb_"" with 100.0 weight got id 0 + --region 1 --zone 1 --ip 10.0.0.51 --port 6200 --device sdb --weight 100 + Device d0r1z1-10.0.0.51:6200R10.0.0.51:6200/sdb_"" with 100.0 weight got id 0 # swift-ring-builder object.builder add \ - --region 1 --zone 1 --ip 10.0.0.51 --port 6000 --device sdc --weight 100 - Device d1r1z2-10.0.0.51:6000R10.0.0.51:6000/sdc_"" with 100.0 weight got id 1 + --region 1 --zone 1 --ip 10.0.0.51 --port 6200 --device sdc --weight 100 + Device d1r1z2-10.0.0.51:6200R10.0.0.51:6200/sdc_"" with 100.0 weight got id 1 # swift-ring-builder object.builder add \ - --region 1 --zone 2 --ip 10.0.0.52 --port 6000 --device sdb --weight 100 - Device d2r1z3-10.0.0.52:6000R10.0.0.52:6000/sdb_"" with 100.0 weight got id 2 + --region 1 --zone 2 --ip 10.0.0.52 --port 6200 --device sdb --weight 100 + Device d2r1z3-10.0.0.52:6200R10.0.0.52:6200/sdb_"" with 100.0 weight got id 2 # swift-ring-builder object.builder add \ - --region 1 --zone 2 --ip 10.0.0.52 --port 6000 --device sdc --weight 100 - Device d3r1z4-10.0.0.52:6000R10.0.0.52:6000/sdc_"" with 100.0 weight got id 3 + --region 1 --zone 2 --ip 10.0.0.52 --port 6200 --device sdc --weight 100 + Device d3r1z4-10.0.0.52:6200R10.0.0.52:6200/sdc_"" with 100.0 weight got id 3 #. Verify the ring contents: @@ -232,10 +232,10 @@ on local devices. The minimum number of hours before a partition can be reassigned is 1 The overload factor is 0.00% (0.000000) Devices: id region zone ip address port replication ip replication port name weight partitions balance meta - 0 1 1 10.0.0.51 6000 10.0.0.51 6000 sdb 100.00 0 -100.00 - 1 1 1 10.0.0.51 6000 10.0.0.51 6000 sdc 100.00 0 -100.00 - 2 1 2 10.0.0.52 6000 10.0.0.52 6000 sdb 100.00 0 -100.00 - 3 1 2 10.0.0.52 6000 10.0.0.52 6000 sdc 100.00 0 -100.00 + 0 1 1 10.0.0.51 6200 10.0.0.51 6200 sdb 100.00 0 -100.00 + 1 1 1 10.0.0.51 6200 10.0.0.51 6200 sdc 100.00 0 -100.00 + 2 1 2 10.0.0.52 6200 10.0.0.52 6200 sdb 100.00 0 -100.00 + 3 1 2 10.0.0.52 6200 10.0.0.52 6200 sdc 100.00 0 -100.00 #. Rebalance the ring: diff --git a/install-guide/source/storage-include3.txt b/install-guide/source/storage-include3.txt index cd89acd392..6551782c1c 100644 --- a/install-guide/source/storage-include3.txt +++ b/install-guide/source/storage-include3.txt @@ -9,7 +9,7 @@ following actions: [DEFAULT] ... bind_ip = MANAGEMENT_INTERFACE_IP_ADDRESS - bind_port = 6000 + bind_port = 6200 user = swift swift_dir = /etc/swift devices = /srv/node