swift (2.6.0)
* Dependency changes
- Updated minimum version of eventlet to 0.17.4 to support IPv6.
- Updated the minimum version of PyECLib to 1.0.7.
* The ring rebalancing algorithm was updated to better handle edge cases
and to give better (more balanced) rings in the general case. New rings
will have better initial placement, capacity adjustments will move less
data for better balance, and existing rings that were imbalanced should
start to become better balanced as they go through rebalance cycles.
* Added container and account reverse listings.
A GET request to an account or container resource with a "reverse=true"
query parameter will return the listing in reverse order. When
iterating over pages of reverse listings, the relative order of marker
and end_marker are swapped.
* Storage policies now support having more than one name.
This allows operators to fix a typo without breaking existing clients,
or, alternatively, have "short names" for policies. This is implemented
with the "aliases" config key in the storage policy config in
swift.conf. The aliases value is a list of names that the storage
policy may also be identified by. The storage policy "name" is used to
report the policy to users (eg in container headers). The aliases have
the same naming restrictions as the policy's primary name.
* The object auditor learned the "interval" config value to control the
time between each audit pass.
* `swift-recon --all` now includes the config checksum check.
* `swift-init` learned the --kill-after-timeout option to force a service
to quit (SIGKILL) after a designated time.
* `swift-recon` now correctly shows timestamps in UTC instead of local
time.
* Fixed bug where `swift-ring-builder` couldn't select device id 0.
* Documented the previously undocumented
`swift-ring-builder pretend_min_part_hours_passed` command.
* The "node_timeout" config value now accepts decimal values.
* `swift-ring-builder` now properly removes devices with zero weight.
* `swift-init` return codes are updated via "--strict" and "--non-strict"
options. Please see the usage string for more information.
* `swift-ring-builder` now reports the min_part_hours lockout time
remaining
* Container sync has been improved to more quickly find and iterate over
the containers to be synced. This reduced server load and lowers the
time required to see data propagate between two clusters. Please see
http://swift.openstack.org/overview_container_sync.html for more details
about the new on-disk structure for tracking synchronized containers.
* A container POST will now update that container's put-timestamp value.
* TempURL header restrictions are now exposed in /info.
* Error messages on static large object manifest responses have been
greatly improved.
* Closed a bug where an unfinished read of a large object would leak a
socket file descriptor and a small amount of memory. (CVE-2016-0738)
* Fixed an issue where a zero-byte object PUT with an incorrect Etag
would return a 503.
* Fixed an error when a static large object manifest references the same
object more than once.
* Improved performance of finding handoff nodes if a zone is empty.
* Fixed duplication of headers in Access-Control-Expose-Headers on CORS
requests.
* Fixed handling of IPv6 connections to memcache pools.
* Continued work towards python 3 compatibility.
* Various other minor bug fixes and improvements.
swift (2.5.0, OpenStack Liberty)
* Added the ability to specify ranges for Static Large Object (SLO)
segments.
* Replicator configs now support an "rsync_module" value to allow
for per-device rsync modules. This setting gives operators the
ability to fine-tune replication traffic in a Swift cluster and
isolate replication disk IO to a particular device. Please see
the docs and sample config files for more information and
examples.
* Significant work has gone in to testing, fixing, and validating
Swift's erasure code support at different scales.
* Swift now emits StatsD metrics on a per-policy basis.
* Fixed an issue with Keystone integration where a COPY request to a
service account may have succeeded even if a service token was not
included in the request.
* Ring validation now warns if a placement partition gets assigned to the
same device multiple times. This happens when devices in the ring are
unbalanced (e.g. two servers where one server has significantly more
available capacity).
* Various other minor bug fixes and improvements.
swift (2.4.0)
* Dependency changes
- Added six requirement. This is part of an ongoing effort to add
support for Python 3.
- Dropped support for Python 2.6.
* Config changes
- Recent versions of Python restrict the number of headers allowed in a
request to 100. This number may be too low for custom middleware. The
new "extra_header_count" config value in swift.conf can be used to
increase the number of headers allowed.
- Renamed "run_pause" setting to "interval" (current configs with
run_pause still work). Future versions of Swift may remove the
run_pause setting.
* Versioned writes middleware
The versioned writes feature has been refactored and reimplemented as
middleware. You should explicitly add the versioned_writes middleware to
your proxy pipeline, but do not remove or disable the existing container
server config setting ("allow_versions"), if it is currently enabled.
The existing container server config setting enables existing
containers to continue being versioned. Please see
http://swift.openstack.org/middleware.html#how-to-enable-object-versioning-in-a-swift-cluster
for further upgrade notes.
* Allow 1+ object-servers-per-disk deployment
Enabled by a new > 0 integer config value, "servers_per_port" in the
[DEFAULT] config section for object-server and/or replication server
configs. The setting's integer value determines how many different
object-server workers handle requests for any single unique local port
in the ring. In this mode, the parent swift-object-server process
continues to run as the original user (i.e. root if low-port binding
is required), binds to all ports as defined in the ring, and forks off
the specified number of workers per listen socket. The child, per-port
servers drop privileges and behave pretty much how object-server workers
always have, except that because the ring has unique ports per disk, the
object-servers will only be handling requests for a single disk. The
parent process detects dead servers and restarts them (with the correct
listen socket), starts missing servers when an updated ring file is
found with a device on the server with a new port, and kills extraneous
servers when their port is found to no longer be in the ring. The ring
files are stat'ed at most every "ring_check_interval" seconds, as
configured in the object-server config (same default of 15s).
In testing, this deployment configuration (with a value of 3) lowers
request latency, improves requests per second, and isolates slow disk
IO as compared to the existing "workers" setting. To use this, each
device must be added to the ring using a different port.
* Do container listing updates in another (green)thread
The object server has learned the "container_update_timeout" setting
(with a default of 1 second). This value is the number of seconds that
the object server will wait for the container server to update the
listing before returning the status of the object PUT operation.
Previously, the object server would wait up to 3 seconds for the
container server response. The new behavior dramatically lowers object
PUT latency when container servers in the cluster are busy (e.g. when
the container is very large). Setting the value too low may result in a
client PUT'ing an object and not being able to immediately find it in
listings. Setting it too high will increase latency for clients when
container servers are busy.
* TempURL fixes (closes CVE-2015-5223)
Do not allow PUT tempurls to create pointers to other data.
Specifically, disallow the creation of DLO object manifests via a PUT
tempurl. This prevents discoverability attacks which can use any PUT
tempurl to probe for private data by creating a DLO object manifest and
then using the PUT tempurl to head the object.
* Ring changes
- Partition placement no longer uses the port number to place
partitions. This improves dispersion in small clusters running one
object server per drive, and it does not affect dispersion in
clusters running one object server per server.
- Added ring-builder-analyzer tool to more easily test and analyze a
series of ring management operations.
- Stop moving partitions unnecessarily when overload is on.
* Significant improvements and bug fixes have been made to erasure code
support. This feature is suitable for beta testing, but it is not yet
ready for broad production usage.
* Bulk upload now treats user xattrs on files in the given archive as
object metadata on the resulting created objects.
* Emit warning log in object replicator if "handoffs_first" or
"handoff_delete" is set.
* Enable object replicator's failure count in swift-recon.
* Added storage policy support to dispersion tools.
* Support keystone v3 domains in swift-dispersion.
* Added domain_remap information to the /info endpoint.
* Added support for a "default_reseller_prefix" in domain_remap
middleware config.
* Allow SLO PUTs to forgo per-segment integrity checks. Previously, each
segment referenced in the manifest also needed the correct etag and
bytes setting. These fields now allow the "null" value to skip those
particular checks on the given segment.
* Allow rsync to use compression via a "rsync_compress" config. If set to
true, compression is only enabled for an rsync to a device in a
different region. In some cases, this can speed up cross-region
replication data transfer.
* Added time synchronization check in swift-recon (the --time option).
* The account reaper now runs faster on large accounts.
* Various other minor bug fixes and improvements.
swift (2.3.0, OpenStack Kilo)
* Erasure Code support (beta)
Swift now supports an erasure-code (EC) storage policy type. This allows
deployers to achieve very high durability with less raw capacity as used
in replicated storage. However, EC requires more CPU and network
resources, so it is not good for every use case. EC is great for storing
large, infrequently accessed data in a single region.
Swift's implementation of erasure codes is meant to be transparent to
end users. There is no API difference between replicated storage and
EC storage.
To support erasure codes, Swift now depends on PyECLib and
liberasurecode. liberasurecode is a pluggable library that allows for
the actual EC algorithm to be implemented in a library of your choosing.
As a beta release, EC support is nearly fully feature complete, but it
is lacking support for some features (like multi-range reads) and has
not had a full performance characterization. This feature relies on
ssync for durability. Deployers are urged to do extensive testing and
not deploy production data using an erasure code storage policy.
Full docs are at http://swift.openstack.org/overview_erasure_code.html
* Add support for container TempURL Keys.
* Make more memcache options configurable. connection_timeout,
pool_timeout, tries, and io_timeout are all now configurable.
* Swift now supports composite tokens. This allows another service to
act on behalf of a user, but only with that user's consent.
See http://swift.openstack.org/overview_auth.html for more details.
* Multi-region replication was improved. When replicating data to a
different region, only one replica will be pushed per replication
cycle. This gives the remote region a chance to replicate the data
locally instead of pushing more data over the inter-region network.
* Internal requests from the ratelimit middleware now properly log a
swift_source. See http://swift.openstack.org/logs.html for details.
* Improved storage policy support for quarantine stats in swift-recon.
* The proxy log line now includes the request's storage policy index.
* Ring checker has been added to swift-recon to validate if rings are
built correctly. As part of this feature, storage servers have learned
the OPTIONS verb.
* Add support of x-remove- headers for container-sync.
* Rings now support hostnames instead of just IP addresses.
* Swift now enforces that the API version on a request is valid. Valid
versions are configured via the valid_api_versions setting in swift.conf
* Various other minor bug fixes and improvements.
swift (2.2.2)
* Data placement changes
This release has several major changes to data placement in Swift in
order to better handle different deployment patterns. First, with an
unbalance-able ring, less partitions will move if the movement doesn't
result in any better dispersion across failure domains. Also, empty
(partition weight of zero) devices will no longer keep partitions after
rebalancing when there is an unbalance-able ring.
Second, the notion of "overload" has been added to Swift's rings. This
allows devices to take some extra partitions (more than would normally
be allowed by the device weight) so that smaller and unbalanced clusters
will have less data movement between servers, zones, or regions if there
is a failure in the cluster.
Finally, rings have a new metric called "dispersion". This is the
percentage of partitions in the ring that have too many replicas in a
particular failure domain. For example, if you have three servers in a
cluster but two replicas for a partition get placed onto the same
server, that partition will count towards the dispersion metric. A
lower value is better, and the value can be used to find the proper
value for "overload".
The overload and dispersion metrics have been exposed in the
swift-ring-build CLI tools.
See http://docs.openstack.org/developer/swift/overview_ring.html
for more info on how data placement works now.
* Improve replication of large out-of-sync, out-of-date containers.
* Added console logging to swift-drive-audit with a new log_to_console
config option (default False).
* Optimize replication when a device and/or partition is specified.
* Fix dynamic large object manifests getting versioned. This was not
intended and did not work. Now it is properly prevented.
* Fix the GET's response code when there is a missing segment in a
large object manifest.
* Change black/white listing in ratelimit middleware to use sysmeta.
Instead of using the config option, operators can set
"X-Account-Sysmeta-Global-Write-Ratelimit: WHITELIST" or
"X-Account-Sysmeta-Global-Write-Ratelimit: BLACKLIST" on an account to
whitelist or blacklist it for ratelimiting. Note: the existing
config options continue to work.
* Use TCP_NODELAY on outgoing connections.
* Improve object-replicator startup time.
* Implement OPTIONS verb for storage nodes.
* Various other minor bug fixes and improvements.
swift (2.2.1)
* Swift now rejects object names with Unicode surrogates.
* Return 403 (instead of 413) on unauthorized upload when over account
quota.
* Fix a rare condition when a rebalance could cause swift-ring-builder
to crash. This would only happen on old ring files when "rebalance"
was the first command run.
* Storage node error limits now survive a ring reload.
* Speed up reading and writing xattrs for object metadata by using larger
xattr value sizes. The change is moving from 254 byte values to 64KiB
values. There is no migration issue with this.
* Deleted containers beyond the reclaim age are now properly reclaimed.
* Full Simplified Chinese translation (zh_CN locale) for errors and logs.
* Container quota is now properly enforced during cross-account COPY.
* ssync replication now properly uses the configured replication_ip.
* Fixed issue were ssync did not replicate custom object headers.
* swift-drive-audit now has the 'unmount_failed_device' config option
(default to True) that controls if the process will unmount failed
drives or not.
* swift-drive-audit will now dump drive error rates to a recon file.
The file location is controlled by the 'recon_cache_path' config value
and it includes each drive and its associated number of errors.
* When a filesystem does't support xattr, the object server now returns
a 507 Insufficient Storage error to the proxy server.
* Clean up empty account and container partitions directories if they
are empty. This keeps the system healthy and prevents a large number
of empty directories from slowing down the replication process.
* Show the sum of every policy's amount of async pendings in swift-recon.
* Various other minor bug fixes and improvements.
swift (2.2.0, OpenStack Juno)
* Added support for Keystone v3 auth.
Keystone v3 introduced the concept of "domains" and user names
are no longer unique across domains. Swift's Keystone integration
now requires that ACLs be set on IDs, which are unique across
domains, and further restricts setting new ACLs to only use IDs.
Please see http://swift.openstack.org/overview_auth.html for
more information on configuring Swift and Keystone together.
* Swift now supports server-side account-to-account copy. Server-
side copy in Swift requires the X-Copy-From header (on a PUT)
or the Destination header (on a COPY). To initiate an account-to-
account copy, the existing header value remains the same, but the
X-Copy-From-Account header (on a PUT) or the Destination-Account
(on a COPY) are used to indicate the proper account.
* Limit partition movement when adding a new placement tier.
When adding a new placement tier (server, zone, or region), Swift
previously attempted to move all placement partitions, regardless
of the space available on the new tier, to ensure the best possible
durability. Unfortunately, this could result in too many partitions
being moved all at once to a new tier. Swift's ring-builder now
ensures that only the correct number of placement partitions are
rebalanced, and thus makes adding capacity to the cluster more
efficient.
* Per storage policy container counts are now reported in an
account response headers.
* Swift will now reject, with a 4xx series response, GET requests
with more than 50 ranges, more than 3 overlapping ranges, or more
than 8 non-increasing ranges.
* The bind_port config setting is now required to be explicitly set.
* The object server can now use splice() for a zero-copy GET
response. This feature is enabled with the "splice" config variable
in the object server config and defaults to off. Also, this feature
only works on recent Linux kernels (AF_ALG sockets must be
supported). A zero-copy GET response can significantly reduce CPU
requirements for object servers.
* Added "--no-overlap" option to swift-dispersion populate so that
multiple runs of the tool can add coverage without overlapping
existing monitored partitions.
* swift-recon now supports filtering by region.
* Various other minor bug fixes and improvements.
swift (2.1.0)
* swift-ring-builder placement was improved to allow gradual addition
of new regions without causing a massive migration of data to the new
region. The change was to prefer device weight first, then look at
failure domains.
* Logging updates
- Eliminated "Handoff requested (N)" log spam.
- Added process pid to the end of storage node log lines.
- Container auditor now logs a warning if the devices path contains a
non-directory.
- Object daemons now send a user-agent string with their full name.
* 412 and 416 responses are no longer tracked as errors in the StatsD
messages from the backend servers.
* Parallel object auditor
The object auditor can now be controlled with a "concurrency" config
value that allows multiple auditor processes to run at once. Using
multiple parallel auditor processes can speed up the overall auditor
cycle time.
* The object updater will now concurrently update each necessary node
in a new greenthread.
* TempURL updates
- The default allowed methods have changed to also allow POST and
DELETE. The new default list is "GET HEAD PUT POST DELETE".
- TempURLs for POST now also allow HEAD, matching existing GET and PUT
functionality.
- Added filename*= support to TempURL Content-Disposition response
header.
* X-Delete-At/After can now be used with the FormPost middleware.
* Make swift-form-signature output a sample form.
* Add v2 API to list endpoints middleware
The new API adds better support for storage policies and changes the
response from a list of backend urls to a dictionary with the keys
"endpoints" and "headers". The endpoints key contains a list of the
backend urls, and the headers key is a dictionary of headers to send
along with the backend request.
* Added allow_account_management and account_autocreate values to /info
responses.
* Enable object system metadata on PUTs (Note: POST support is ongoing).
* Various other minor bug fixes and improvements.
swift (2.0.0)
* Storage policies
Storage policies allow deployers to configure multiple object rings
and expose them to end users on a per-container basis. Deployers
can create policies based on hardware performance, regions, or other
criteria and independently choose different replication factors on
them. A policy is set on a Swift container at container creation
time and cannot be changed.
Full docs are at http://swift.openstack.org/overview_policies.html
* Add profiling middleware in Swift
The profile middleware provides a tool to profile Swift
code on the fly and collects statistical data for performance
analysis. A native simple Web UI is also provided to help
query and visualize the data.
* Add --quoted option to swift-temp-url
* swift-recon now supports checking the md5sum of swift.conf, which
helps deployers verify configurations are consistent across a cluster.
* Users can now set the transaction id suffix by passing in
a value in the X-Trans-Id-Extra header.
* New log_max_line_length option caps the maximum length of a log line.
* Support If-[Un]Modified-Since for object HEAD
* Added missing constraints and ratelimit parameters to /info
* Add ability to remove subsections from /info
* Unify logging for account, container, and object server processes
to provide a consistent message format. This change reorders the
fields logged for the account server.
* Add targeted config loading to swift-init. This allows an easier
and more explicit way to tell swift-init to run specific server
process configurations.
* Properly quote www-authenticate (CVE-2014-3497)
* Fix logging issue when services stop on py26.
* Change the default logged length of the auth token to 16.
* Explicitly set permissions on generated ring files to 0644
* Fix file uploads larger than 2GiB in the formpost feature
* Fixed issue where large objects would fail to download if the
auth token expired partway through the download
* Various other minor bug fixes and improvements
swift (1.13.1, OpenStack Icehouse)
* Change the behavior of CORS responses to better match the spec
A new proxy config variable (strict_cors_mode, default to True)
has been added. Setting it to False keeps the old behavior. For
an overview of old versus new behavior, please see
https://review.openstack.org/#/c/69419/
* Invert the responsibility of the two instances of proxy-logging in
the proxy pipeline
The first proxy_logging middleware instance to receive a request
in the pipeline marks that request as handling it. So now, the
left most proxy_logging middleware handles logging for all
client requests, and the right most proxy_logging middleware
handles all other requests initiated from within the pipeline to
its left. This fixes logging related to large object
requests not properly recording bandwidth.
* Added swift-container-info and swift-account-info tools
* Allow specification of object devices for audit
* Dynamic large object COPY requests with ?multipart-manifest=get
now work as expected
* When a client is downloading a large object and one of the segment
reads gets bad data, Swift will now immediately abort the request.
* Fix ring-builder crash when a ring partition was assigned to a
deleted device, zero-weighted device, and normal device
* Make probetests work with conf.d configs
* Various other minor bug fixes and improvements.
swift (1.13.0)
* Account-level ACLs and ACL format v2
Accounts now have a new privileged header to represent ACLs or
any other form of account-level access control. The value of
the header is a JSON dictionary string to be interpreted by the
auth system. A reference implementation is given in TempAuth.
Please see the full docs at
http://swift.openstack.org/overview_auth.html
* Added a WSGI environment flag to stop swob from always using
absolute location. This is useful if middleware needs to use
out-of-spec Location headers in a response.
* Container sync proxies now support simple load balancing
* Config option to lower the timeout for recoverable object GETs
* Add a way to ratelimit all writes to an account
* Allow multiple storage_domain values in cname_lookup middleware
* Moved all DLO functionality into middleware
The proxy will automatically insert the dlo middleware at an
appropriate place in the pipeline the same way it does with the
gatekeeper middleware. Clusters will still support DLOs after upgrade
even with an old config file that doesn't mention dlo at all.
* Remove python-swiftclient dependency
* Add secondary groups to process user during privilege escalation
* When logging request headers, it is now possible to specify
specifically which headers should be logged
* Added log_requests config parameter to account and container servers
to match the parameter in the object server. This allows a deployer
to turn off log messages for these processes.
* Ensure swift.source is set for DLO/SLO requests
* Fixed an issue where overwriting segments in a dynamic manifest
could cause issues on pipelined requests.
* Properly handle COPY verb in container quota middleware
* Improved StaticWeb 404 error message on web-listings and index
* Various other minor bug fixes and improvements.
swift (1.12.0)
* Several important pieces of information have been added to /info:
- Configured constraints are included and allow a client to discover
the limits on names and object sizes that the cluster supports.
- The supported tempurl methods are now included.
- Static large object constraints are now included.
* The Last-Modified header value returned will now be the object's
timestamp rounded up to the next second. This allows subsequent
requests with If-[un]modified-Since to use the Last-Modified
value as expected.
* Non-integer values for if-delete-at headers will now properly
report a 400 error instead of a 503.
* Fix object versioning with non-ASCII container names.
* Bulk delete with POST now works properly.
* Generic means for persisting system metadata
Swift now supports system-level metadata on accounts and
containers. System metadata provides a means to store internal
custom metadata with associated Swift resources in a safe and
secure fashion without actually having to plumb custom metadata
through the core swift servers. The new gatekeeper middleware
prevents this system metadata from leaking into the request or
being set by a client.
* catch_errors and gatekeeper middleware are now forced into the proxy
pipeline if not explicitly referenced.
* New container sync configuration option, separating the end user
from knowing the required end point and adding more secure
signed requests. See
http://swift.openstack.org/overview_container_sync.html for full
information.
* bulk middleware now can be configured to retry deleting containers.
* The default yield_frequency used to keep client connections alive
during slow bulk requests was reduced from 60 seconds to 10 seconds.
While this is a change to a default, it should not affect deployments
and there is no migration process needed.
* Swift processes will attempt to set RLIMIT_NPROC to 8192.
* Server processes will now exit with a non-zero error code on config
errors.
* Warn if read_affinity is configured but not enabled.
* Fix checkmount error parsing in swift-recon.
* Log at warn level when an object is quarantined.
* Fixed CVE-2014-0006 to avoid a potential timing attack with tempurl.
* Various other minor bug fixes and improvements.
swift (1.11.0)
* Added discoverable capabilities
A Swift proxy server now by default (although it can be turned off)
will respond to requests to /info. The response to these requests
include information about the cluster and can be used by clients to
determine which features are supported in the cluster.
* Object replication ssync (an rsync alternative)
A Swift storage node can now be configured to use Swift primitives
for replication transport instead of rsync. This is an experimental
feature that is not yet considered production ready.
* If a source times out on an object server read, try another one
of them with a modified range.
* The proxy now responds to many types of requests as soon as it
has a quorum. This can help speed up responses (without
changing the results), especially when one node is acting up.
There is a post_quorum_timeout config value that can tune how
long to wait for requests to finish after a quorum has been
established.
* Add accurate timestamps in proxy log lines for the start and
end of a request. These are added as new fields on the end of
the existing log lines, and therefore should not break
existing, well-behaved log processors.
* Add an "inline" query parameter to tempurl
By default, temporary URLs add a "Content-Disposition" header
that forces many clients to download the object. Now, temporary
URLs support an optional "inline" query parameter that will
force a "Content-Disposition: inline" header to be added to the
response, overriding the default.
* Use TCP_NODELAY for created sockets. This can dramatically
lower latency for small object workloads.
* DiskFile API, with reference implementation
The DiskFile abstraction for talking to data on disk has been
refactored to allow alternate implementations to be developed.
Included in the codebase is an in-memory reference
implementation. For full documentation, please see the developer
documentation. The DiskFile API is still a work in progress and
is not yet finalized.
* Removal of swift-bench
The included benchmarking tool swift-bench has been extracted
from the codebase and is now in its own repository at
https://github.com/openstack/swift-bench. New swift-bench
binaries and packages may be found on PyPI at
https://pypi.python.org/pypi/swift-bench
* Bulk delete now also supports the POST verb, in addition to DELETE
* Added functionality to the swift-ring-builder to support
limited recreation of ring builder files from the ring file itself.
* HEAD on account now returns 410 if account was deleted and
not yet reaped. The old behavior was to return a 404.
* Fixed a bug introduced since the 1.10.0 release that
prevented expired objects from being removed from the system.
This resulted in orphaned expired objects taking up space on
the system but inaccessible to the API. This regression and
fix are only important if you have deployed code since the
1.10.0 release. For a full discussion, including a script that
can be used to clean up orphaned objects, see
https://bugs.launchpad.net/swift/+bug/1257330
* Tie socket write buffer size to server chunk size parameter. This
pairs the underlying network buffer size with the size of data
that Swift attempts to read from the connection, thereby
improving efficiency and throughput on connections.
* Fix 500 from account-quota middleware. If a user had set
X-Account-Meta-Quota-Bytes to something non-integer prior to
the installation of the account-quota middleware, then the
quota check would choke on it. Now a non-integer value is
treated as "no quota".
* Quarantine objects with busted metadata. Before, if you
encountered an object with corrupt or missing xattrs, the
object server would return a 500 on GET, and wouldn't quarantine
anything. Now the object server returns a 404 for that GET and
the corrupted file is quarantined, thus giving replication a
chance to fix it.
* Fix quarantine and error counts in audit logs
* Report transaction ID in failure exception logs
* Make pbr a build-time only dependency
* Worked around a bug in eventlet 0.9.16 where the size of the
memcache connection pools would grow unbounded.
* Tempurl keys are now properly stored as utf8
* Fixed an issue where concurrent PUT requests to accounts or
containers may result in errors due to locked databases.
* Handle copy requests in account and container quota middleware
* Now ensure that a WWW-Authenticate header is on all 401 responses
* Various other bug fixes and improvements
swift (1.10.0, OpenStack Havana)
* Added support for pooling memcache connections
* Added support to replicating handoff partitions first in object
replication. Can also configure how many remote nodes a storage node
must talk to before removing a local handoff partition.
* Fixed bug where memcache entries would not expire
* Much faster calculation for choosing handoff nodes
* Added container listing ratelimiting
* Fixed issue where the proxy would continue to read from a storage
server even after a client had disconnected
* Added support for headers that are only visible to the owner of a Swift
account
* Fixed ranged GET with If-None-Match
* Fixed an issue where rings may not be balanced after initial creation
* Fixed internationalization support
* Return the correct etag for a static large object on the PUT response
* Allow users to extract archives to containers with ACLs set
* Fix support for range requests against static large objects
* Now logs x-copy-from header in a useful place
* Reverted back to old XML output of account and container listings to
ensure older clients do not break
* Account quotas now appropriately handle copy requests
* Fix issue with UTF-8 handling in versioned writes
* Various other bug fixes and improvements, including support for running
Swift under Pypy and continuing work to support storage policies
swift (1.9.1)
* Disallow PUT, POST, and DELETE requests from creating older tombstone
files, preventing the possibility of filling up the disk and removing
unnecessary container updates.
* Set default wsgi workers to cpu_count
Change the default value of wsgi workers from 1 to auto. The new
default value for workers in the proxy, container, account & object
wsgi servers will spawn as many workers per process as you have cpu
cores. This will not be ideal for some configurations, but it's much
more likely to produce a successful out of the box deployment.
* Added reveal_sensitive_prefix config setting to filter the auth token
logged by the proxy server.
* Ensure Keystone's reseller prefix ends with an underscore. Previously
this was a recommendation--now it is enforced.
* Added log_file_pattern config to swift-drive-audit for drive errors
* Add support for telling Swift to detect a content type on a request.
* Additional object stats are now logged in the object auditor
* Moved the DiskFile interface into its own module
* Ensure the SQLite cursors are closed when creating functions
* Better support for valid Accept headers
* In Keystone, don't allow users to delete their own account
* Return a UTC timezone designator in container listings
* Ensure that users can't remove their account quotas
* Allow floating point value for dispersion coverage
* Fix incorrect error page handling in staticweb
* Add utf-8 charset to multipart-manifest=get response.
* Allow dispersion tools to use keystone server with insecure certificate
* Ensure that files are always closed in tests
* Use OpenStack's "Hacking" guidelines for code formatting
* Various other minor bug fixes and improvements
swift (1.9.0)
* Global clusters support
The "region" concept introduced in Swift 1.8.0 has been augmented with
support for using a separate replication network and configuring read
and write affinity. These features combine to offer support for a single
Swift cluster spanning wide geographic area.
* Disk performance
The object server now can be configured to use threadpools to increase
performance and smooth out latency throughout the system. Also, many
disk operations were reordered to increase reliability and improve
performance.
* Added config file conf.d support
Allow Swift daemons and servers to optionally accept a directory as the
configuration parameter. This allows different parts of the config file
to be managed separately, eg each middleware could use a separate file
for its particular config settings.
* Allow two TempURL keys per account
By adding a second key, a user can safely rotate keys and prevent URLs
already in use from becoming invalid. TempURL middlware has also been
updated to allow a configuable set of allowed methods and to prevent a
bugrelated to content-disposition names.
* Added crossdomain.xml middleware. See
http://docs.openstack.org/developer/swift/crossdomain.html for details
* Added rsync bandwidth limit setting for object replicator
* Transaction ID updated to include the time and an optional suffix
* Added x-remove-versions-location header to disable versioned writes
* Improvements to support for Keystone ACLs
* Added parallelism to object expirer daemon
* Added support for ring hash prefix in addition to the existing suffix
* Allow all headers requested for CORS
* Stop getting useless bytes on manifest Range requests
* Improved container-sync resiliency
* Added example Apache config files. See
http://docs.openstack.org/developer/swift/apache_deployment_guide.html
for more info
* If an account is marked as deleted but hasn't been reaped and is still
on disk, responses will include an "X-Account-Status" header
* Fix 503 on account/container HEAD with invalid format
* Added extra safety on account-level DELETE when using bulk deletes
* Made colons quote-safe in logs (mainly for IPv6)
* Fixed bug with bulk delete max items
* Fixed static large object manifest range requests
* Prevent static large objects from containing other static large objects
* Fixed issue with use of delimiter in container queries where some
objects would not be listed
* Various other minor bug fixes and improvements
swift (1.8.0, OpenStack Grizzly)
* Make rings' replica count adjustable
* Added a region tier to the ring above zones
* Added timing-based sorting of object servers on read requests
* Added support for auto-extract archive uploads
* Added support for bulk delete requests
* Added support for large objects with static manifests
* Added list_endpoints middleware to provide an API for determining where
the ring places data
* proxy-logging middleware can now handle logging for other middleware
proxy-logging should be used twice in the proxy pipeline. The first
handles middleware logs for requests that never made it all the way
to the server. The last handles requests that do make it to the server.
This is a change that may require an update to your proxy server
config file or custom middleware that you may be using. See the full
docs at http://docs.openstack.org/developer/swift/misc.html#module-swift.common.middleware.proxy_logging.
* Changed the default sample rate for a few high-traffic requests.
Added log_statsd_sample_rate_factor to globally tune the StatsD
sample rate. This tunable can be used to reduce StatsD traffic
proportionally for all metrics and is intended to replace
log_statsd_default_sample_rate, which is left alone for
backward-compatibility, should anyone be using it.
* Added swift_hash_path_prefix option to swift.conf
New deployments are advised to set this value to a random secret
to protect against hash collisions
* Added user-managed container quotas
* Added support for account-level quotas managed by an auth reseller
* Added --run-dir option to swift-init
* Added more options to swift-bench
* Added support for CORS "actual requests"
* Added fallocate_reserve option to protect against full drives
* Allow ring rebalance to take a seed
* Ring serialization will now produce the same gzip file (Py2.7)
* Added support to swift-drive-audit for handling rotated logs
* Added first-byte latency timings for GET requests
* Added per disk PUT timing monitoring support
* Added speed limit options for DB auditor
* Force log entries to be one line
* Ensure that fsync is used and not just fdatasync
* Improved handoff node selection
* Deprecated keystone is_admin feature
* Fix large objects with unicode in the segment names
* Update Swift's MemcacheRing to provide API compatibility with
standard Python memcache libraries
* Various other minor bug fixes and improvements
swift (1.7.6)
* Better tempauth storage URL guessing
* Added --top option to swift-recon -d
* Allow optional, temporary healthcheck failure
* keystoneauth middleware now supports cross-tenant ACLs
* Add dispersion report flags to limit reports
* Add config option to turn eventlet debug on/off
* Added override option for swift-init's KILL_WAIT
* Added oldest and most recent replication pass to swift-recon
* Fixed 500 error response when GETing a many-segment manifest
* Memcached keys now use a delta timeout when possible
* Refactor DiskFile to hide temp file names and exts
* Remove IP-based container-sync ACLs from auth middlewares
* Fixed bug in deleting memcached account info data
* Fixed lazy-listing of object manifest segments
* Fixed bug where a ? in the object name caused an error
* Swift now returns 406 if it can't satisfy Accept
* Fix infinite recursion bug in object replicator
* Swift will now reject names with NULL characters
* Fixed object-auditor logging to use a minimum of unix sockets
* Various other minor bug fixes and improvements
swift (1.7.5)
* Support OPTIONS verb, including CORS preflight requests
* Added support for custom log handlers
* Range support is extended to support GET requests with multiple ranges.
Multi-range GETs are not yet supported against large-object manifests.
* Cluster constraints are now settable by config
* Replicators can now run against specific devices or partitions
* swift-bench now supports running on multiple cores and multiple servers
* Added partition option to swift-get-nodes
* Allow underscores in account and user in tempauth via base64 encodings
* New option to the dispersion report to output the missing partitions
* Changed storage server StatsD metrics to report timings instead of
counts for errors. See the admin guide for the updated metric names.
* Removed a dependency on WebOb and replaced it with an internal module
* Fixed config parsing in swift-bench -x
* Fixed sample_rate in StatsD logging
* Track unlinks of async_pendings with StatsD
* Remove double GET on range requests
* Allow unsetting of X-Container-Sync-To and ACL headers
* DB reclamation now removes empty suffix directories
* Fix non-standard 100-continue behavior
* Allow object-expirer to delete the last copy of a versioned object
* Only set TCP_KEEPIDLE on systems where it is supported
* Fix stdin flush and fdatasync issues on BSD platforms
* Allow object-expirer to delete the last version of an object
* Various other minor bug fixes and improvements
swift (1.7.4, OpenStack Folsom)
* Fix issue where early client disconnects may have caused a memory leak
swift (1.7.2)
* Fix issue where memcache serialization was not properly loading
the config value
swift (1.7.0)
* Use custom encoding for ring data instead of pickle
Serialize RingData in a versioned, custom format which is a combination
of a JSON-encoded header and .tostring() dumps of the
replica2part2dev_id arrays. This format deserializes hundreds of times
faster than rings serialized with Python 2.7's pickle (a significant
performance regression for ring loading between Python 2.6 and Python
2.7). Fixes bug 1031954.
The new implementation is backward-compatible; if a ring
does not begin with a new-style magic string, it is assumed to be an
old-style pickle-dumped ring and is handled as before. So new Swift
code can read old rings, but old Swift code will not be able to read
newly-serialized rings.
* Do not use pickle for serialization in memcache, but JSON
To avoid issues on upgrades (unability to read pickled values, and cache
poisoning for old servers not understanding JSON), we add a
memcache_serialization_support configuration option, with the following
values:
0 = older, insecure pickle serialization
1 = json serialization but pickles can still be read (still insecure)
2 = json serialization only (secure and the default)
To avoid an instant full cache flush, existing installations should
upgrade with 0, then set to 1 and reload, then after some time (24
hours) set to 2 and reload. Support for 0 and 1 will be removed in
future versions.
* Update proxy-server StatsD logging. This is a significant change to the
existing StatsD intigration. Docs for this feature can be found in
doc/source/admin_guide.rst.
* Improved swift-bench to allow random object sizes and better usability
* Updated probe tests
* Replicator removal metrics are now generated on a per-device basis
* Made object replicator locking more optimistic
* Split proxy-server code into separate modules
* Fixed bug where swift-recon would not report all unmounted drives
* Fixed issue where a LockTimeout may have caused a file descriptor to
not be closed properly
* Fixed a bug where an error may have caused the proxy to stop returning
data to a client
* Fixed bug where expirer would get confused by odd deletion times
* Fixed a bug where auto-creating accounts would return an error if they
were recreated after being deleted
* Fix when rate_limit_after_segment kicks in
* fallocate() failures properly return HTTPInsufficientStorage from
object-server before reading from wsgi.input, allowing the proxy
server to quickly error_limit that node
* Fixed error with large object manifests and x-newest headers on GET
* Various other minor bug fixes and improvements
swift (1.6.0)
* Removed bin/swift and swift/common/client.py from the swift repo. These
tools are now managed in the python-swiftclient project. The
python-swiftclient project is a second deliverable of the openstack
swift project.
* Moved swift_auth (openstack keystone) middleware from keystone project
into swift project
* Made dispersion report work with any replica count other than 3. This
substantially affects the JSON output of the dispersion report, and any
tools written to consume this output will need to be updated.
* Added Solaris (Illumos) compatibility
* Added -a option to swift-get-nodes to show all handoffs
* Add UDP protocol support for logger
* Added config options for rate limiting of large object downloads.
* Added config option `log_handoffs` (defaults to True) to proxy server
to log and update statsd with information about when a handoff node is
used. This is helpful to track the health of the cluster.
* swift-bench can now use auth 2.0
* Support forbidding substrings based on a regexp in name_filter
middleware
* Hardened internal server processes so only authorized methods can be
called.
* Made ranged requests on large objects work correctly when size of
manifest file is not 0 byte
* Added option to dispersion report to print 404s to stdout
* Fix object replication on older rsync versions when using ipv4
* Fixed bug with container reclaim/report race
* Make object server's caching more configurable.
* Check disk failure before syncing for each partition
* Allow special characters to be referenced by manifest objects
* Validate devices and partitions to avoid directory traversals
* Support WebOb 1.2
* Ensure that accessing the ring devs reloads the ring if necessary.
Specifically, this allows replication to work when it has been started
with an empty ring.
* Various other minor bug fixes and improvements
swift (1.5.0)
* New option to toggle SQLite database preallocation with account
and container servers.
IMPORTANT:
The default for database preallocation is now off when before
it was always on. This will affect performance on clusters that
use standard drives with shared account, container, object
servers. Such deployments will need to update their
configurations to turn database preallocation back on (see
account-server.conf-sample and container-server.conf.sample
files).
If you are using dedicated account and container servers with
SSDs, you should defragment your file systems after upgrade and
should notice dramatically less disk usage.
* swift3 middleware removed and moved to http://github.com/fujita/swift3.
This will require a config change in the proxy server and adds a new
dependency for deployers using this middleware.
* Moved proxy server logging to middleware. This requires a config change
in the proxy server.
* Added object versioning feature. (See docs for full description)
* Add statsd logging throughout the system (beta, some event names may
change)
* Expanded swift-recon middleware support
* The ring builder now supports as-unique-as-possible partition
placement, unified balancing methods, and can work on more than one
device at a time.
* Numerous bug fixes to StaticWeb (previously unusable at scale).
* Bug fixes to all middleware to allow passthrough requests under various
conditions and to share pre-authed request code (which previously had
differing behaviors and interaction bugs).
* Bug fix to object expirer that could cause infinite looping.
* Added optional delay to account reaping.
* Async-pending write optimization.
* Dispersion tools now support multiple auth versions
* Updated man pages
* Proxy server can now deny requests to particular hostnames
* Updated docs for domain remap middleware
* Updated docs for cname lookup middleware
* Made swift CLI binary easier to wrap
* Proxy will now also return X-Timestamp header
* Added associated projects doc as a place to track ecosystem projects
* end_marker made consistent across both object and container listings
* Various other minor bug fixes and improvements
swift (1.4.8, OpenStack Essex)
* Added optional max_containers_per_account restriction
* Added alternate metadata header removal method
* Added optional name_check middleware filter
* Added support for venv-based test runs with tox
* StaticWeb behavior change with X-Web-Mode: true and
non-StaticWeb-enabled containers (immediately 404s instead of passing
the request on down the WSGI pipeline).
* Fixed typo in swift-dispersion-report JSON output.
* Swift-Recon-related fix to create temporary files on the same disk as
their final destinations.
* Updated return codes in swift3 middleware
* Fixed swift3 middleware to allow Content-Range header in response
* Updated swift.common.client and swift CLI tool with auth 2.0 changes
* Swift CLI tool now supports common openstack auth args
* Body of HTTP responses now included in error messages of swift CLI tool
* Refactored some ring building functions for clarity and simplicity
swift (1.4.7)
* Improvements to account and container replication.
* Fix for account servers allowing .pending to exist before .db.
* Fixed possible key-guessing exploit in formpost.
* Fixed bug in ring builder when removing a large percentage of devices.
* Swift CLI tool now supports openstack-standard CLI flags.
* New JSON output option for swift-dispersion-report.
* Removed old stats tools.
* Other bug fixes and documentation updates.
swift (1.4.6)
* TempURL and FormPost middleware added
* Added memcache.conf option
* Dropped eval-based json parser fallback
* Properly lose all groups when dropping privileges
* Fix permissions when creating files
* Fixed bug regarding negative Content-Length in requests
* Consistent formatting on Last-Modified response header
* Added timeout option to swift-recon
* Allow arguments to be passed to nosetest
* Removed tools/rfc.sh
* Other minor bug fixes
swift (1.4.5)
* New swift-orphans and swift-oldies command line tools to detect
orphaned Swift processes and long running processes.
* Command line tool "swift" now supports marker queries.
* StaticWeb middleware improved to save an extra request when
possible.
* Updated swift-init to support swift-object-expirer.
* Fixed object replicator timeout handling [bug 814263].
* Fixed accept header 503 vs. 400 [bug 891247].
* More exception handling for auditors.
* Doc updates for PPA [bug 905608].
* Doc updates to explain replication more clearly [bug 906976].
* Updated SAIO instructions to no longer mention ~/swift/trunk.
* Fixed docstrings in the ring code.
* PEP8 Updates.
swift (1.4.4)
* Fixes to prevent socket hoarding (memory leak)
* Add sockstat info to recon.
* Fixed leak from SegmentedIterable.
* Fixed bufferedhttp to deref socks and fps.
* Add support for OS Auth API version 2.
* Make Eventlet's WSGI server log differently.
* Updated TimeoutError and except Exception refs.
* Fixed time-sensitive tests.
* Fixed object manifest etags.
* Fixes for swift-recon disk usage distribution graph.
* Adding new manpages for configuration files.
* Change bzr to swift in getting_started doc.
* Fixes the HTTPConflict import.
* Expiring Objects Support.
* Fixing bug with x-trans-id.
* Requote the source when doing a COPY.
* Add documentation for Swift Recon.
* Make drive audit regexes detect 4-letter drives.
* Adding what acc/cont/obj into the ratelimit error messages.
* Query only specific zone via swift-recon.
swift (1.4.3, OpenStack Diablo)
* Additional quarantine catching code.
* Added client_ip to all proxy log lines not otherwise containing it.
* Content-Type is now application/xml for "GET services/bucket" swift3
middleware requests.
* Alpha release of the Swift Recon Experiment
* Fix last modified date for swift3 middleware.
* Fix to clear account/container metadata on account/container deletion.
* Fix for corner case regarding X-Newest.
* Fix for object auditor running out of file descriptors.
* Fix to return all proper headers for manifest objects.
* Fix to the swift tool to strip any leading slashes on file names when
uploading.
swift (1.4.2)
* Removed stats/logging code from Swift [now in separate slogging project].
* Container Synchronization Feature - First Edition
* Fix swift3 authentication bug about the Date and X-Amz-Date handling.
* Changing ratelimiting so that it only limits PUTs/DELETEs.
* Object POSTs are implemented as COPYs now by default (you can revert to
previous implementation with conf object_post_as_copy = false)
* You can specify X-Newest: true on GETs and HEADs to indicate you want
Swift to query all backend copies and return the newest version
retrieved.
* Object COPY requests now always copy the newest object they can find.
* Account and container GETs and HEADs now shuffle the nodes they use to
balance load.
* Fixed the infinite charset: utf-8 bug
* This fixes the bug that drop_buffer_cache() doesn't work on systems where
off_t isn't 64 bits.
swift (1.4.1)
* st renamed to swift
* swauth was separated froms swift. It is now its own project and can be
found at https://github.com/gholt/swauth.
* tempauth middleware added as an extremely limited auth system for dev
work.
* Account and container listings now properly labeled UTF-8 (previously the
label was "utf8").
* Accounts are auto-created if an auth token is valid when the
account_autocreate proxy config parameter is set to true.
swift (1.4.0)
* swift-bench now cleans up containers it creates.
* WSGI servers now load WSGI filters and applications after forking for
better plugin support.
* swauth-cleanup-tokens now handles 404s on token containers and tokens
better.
* Proxy logs the remote IP address as the client IP in the absence of
X-Forwarded-For and X-Cluster-Client-IP headers instead of - like it did
before.
* Swift3 WSGI middleware added support for param-signed URLs.
* swauth- scripts now exit with proper exit codes.
* Fixed a bug where allowed_headers weren't honored for HEAD requests.
* Double quarantining of corrupted sqlite3 databases now works.
* Fix for Object replicator breaking when running object replicator with no
objects on the server.
* Added the Accept-Ranges header to GET and HEAD requests.
* When a single object has multiple async pending updates on a single
device, only latest async pending is now sent.
* Fixed issue of Swift3 WSGI middleware not working correctly with '/' in
object names.
* Renamed swift-stats-* to swift-dispersion-* to avoid confusion with log
stats stuff.
* Added X-Trans-Id transaction id header to every response.
* Fixed a Python 2.7 compatibility problem.
* Now using bracketed notation for ip literals in rsync calls, so
compressed ipv6 literals work.
* Added a container stats collector and refactoring some of the stats code.
* Changed subdir nodes in XML formatted object listings to align with
object nodes. Now: foo Before:
.
* Fixed bug in Swauth to support for multiple swauth instances.
* swift-ring-builder: Added list_parts command which shows common
partitions for a given list of devices.
* Object auditor now shows better statistics updates in the logs.
* Stats uploaders now allow overrides for source_filename_pattern and
new_log_cutoff values.
---
Changelog entries for previous versions are incomplete
swift (1.3.0, OpenStack Cactus)
swift (1.2.0, OpenStack Bexar)
swift (1.1.0, OpenStack Austin)
swift (1.0.0, Initial Release)