openstack/swift
Code Issues Proposed changes
1226867758
swift/etc/container-server.conf-sample
Matthew Oliver 090baa1fa9 Swift configuration parameter audit 
This change is the result of an audit through the config parameters
provided by swift and how/if they are addressed in the swift
documentation. The documentation being the sample config files in
the /etc directory or the documentation.

This change is only concerned with the config files in etc/ next
I will look at the documentation in the doc/ folder.

This change makes the following assumptions:
  - Unless stated otherwise, the commented out parameter in the
    sample configuration is the default for swift.

  - When the default in the code differs from that of the sample
    configuration, the default in the code is correct.

Container reconciler:
  Parameter: interval
    - code: 30
    - config: 300
  Result: config = 30

Object Expirer:
  Parameter: recon_cache_path
    - code: /var/cache/swift
    - config: Parameter missing
  Result: Add parameter

swift-dispersion-populate && swift-dispersion-report
  Parameter: auth_version
    - code: 1.0
    - config: 2.0 (due to being a confusing example of how to setup
                   version 2.0).
  Result: Added 'auth_version = 1.0' to the right section (showing
          default and make the sample configuration for auth version
          2.0 easier to understand.

swift-drive-audit:
  Parameter: log_file_pattern
    - code: /var/log/kern.*[!.][!g][!z]
    - config: /var/log/kern*
  Result: config = /var/log/kern.*[!.][!g][!z]

  NOTE: swift-drive-audit uses a parameter called device_dir which
        defaults to '/srv/node'. In all other swift binaries/services
        there is a similar parameter called devices which stores the
        same thing. This is an inconsistency which I haven't fixed
        as this could break existing swift clusters out in the wild.

Proxy Server:
  Parameter: object_chunk_size
    - code: 65536
    - config: 8192
  Result: config = 65536

  Parameter: client_chunk_size
    - code: 65536
    - config: 8192
  Result: config = 65536

  Parameter: strict_cors_mode
    - code: True
    - config: No parameter
  Result: config = True

Account and Container replicator configuration confusion:
  NOTES:
    The account and container replicators have parameters:
      - interval
      - run_pause

    Both of these are loaded into the same variable in code:
      self.interval = int(conf.get('interval') or
                          conf.get('run_pause') or 30)

    If a user sets both to different values then interval is used.
  Result: Update the configuration to make this more clear.

DocImpact
Change-Id: Iaadbb1a6284f8b3e0801bc343b29772f70f4bf6e
2014-08-06 11:12:14 +10:00

203 lines
6.3 KiB
Plaintext
Raw Blame History

[DEFAULT]
# bind_ip = 0.0.0.0
# bind_port = 6001
# bind_timeout = 30
# backlog = 4096
# user = swift
# swift_dir = /etc/swift
# devices = /srv/node
# mount_check = true
# disable_fallocate = false
#
# Use an integer to override the number of pre-forked processes that will
# accept connections.
# workers = auto
#
# Maximum concurrent requests per worker
# max_clients = 1024
#
# This is a comma separated list of hosts allowed in the X-Container-Sync-To
# field for containers. This is the old-style of using container sync. It is
# strongly recommended to use the new style of a separate
# container-sync-realms.conf -- see container-sync-realms.conf-sample
# allowed_sync_hosts = 127.0.0.1
#
# You can specify default log routing here if you want:
# log_name = swift
# log_facility = LOG_LOCAL0
# log_level = INFO
# log_address = /dev/log
# The following caps the length of log lines to the value given; no limit if
# set to 0, the default.
# log_max_line_length = 0
#
# comma separated list of functions to call to setup custom log handlers.
# functions get passed: conf, name, log_to_console, log_route, fmt, logger,
# adapted_logger
# log_custom_handlers =
#
# If set, log_udp_host will override log_address
# log_udp_host =
# log_udp_port = 514
#
# You can enable StatsD logging here:
# log_statsd_host = localhost
# log_statsd_port = 8125
# log_statsd_default_sample_rate = 1.0
# log_statsd_sample_rate_factor = 1.0
# log_statsd_metric_prefix =
#
# If you don't mind the extra disk space usage in overhead, you can turn this
# on to preallocate disk space with SQLite databases to decrease fragmentation.
# db_preallocation = off
#
# eventlet_debug = false
#
# You can set fallocate_reserve to the number of bytes you'd like fallocate to
# reserve, whether there is space for the given file size or not.
# fallocate_reserve = 0
[pipeline:main]
pipeline = healthcheck recon container-server
[app:container-server]
use = egg:swift#container
# You can override the default log routing for this app here:
# set log_name = container-server
# set log_facility = LOG_LOCAL0
# set log_level = INFO
# set log_requests = true
# set log_address = /dev/log
#
# node_timeout = 3
# conn_timeout = 0.5
# allow_versions = false
# auto_create_account_prefix = .
#
# Configure parameter for creating specific server
# To handle all verbs, including replication verbs, do not specify
# "replication_server" (this is the default). To only handle replication,
# set to a True value (e.g. "True" or "1"). To handle only non-replication
# verbs, set to "False". Unless you have a separate replication network, you
# should not specify any value for "replication_server".
# replication_server = false
[filter:healthcheck]
use = egg:swift#healthcheck
# An optional filesystem path, which if present, will cause the healthcheck
# URL to return "503 Service Unavailable" with a body of "DISABLED BY FILE"
# disable_path =
[filter:recon]
use = egg:swift#recon
#recon_cache_path = /var/cache/swift
[container-replicator]
# You can override the default log routing for this app here (don't use set!):
# log_name = container-replicator
# log_facility = LOG_LOCAL0
# log_level = INFO
# log_address = /dev/log
#
# vm_test_mode = no
# per_diff = 1000
# max_diffs = 100
# concurrency = 8
# interval = 30
# node_timeout = 10
# conn_timeout = 0.5
#
# The replicator also performs reclamation
# reclaim_age = 604800
#
# Time in seconds to wait between replication passes
# Note: if the parameter 'interval' is defined then it will be used in place
# of run_pause.
# run_pause = 30
#
# recon_cache_path = /var/cache/swift
[container-updater]
# You can override the default log routing for this app here (don't use set!):
# log_name = container-updater
# log_facility = LOG_LOCAL0
# log_level = INFO
# log_address = /dev/log
#
# interval = 300
# concurrency = 4
# node_timeout = 3
# conn_timeout = 0.5
#
# slowdown will sleep that amount between containers
# slowdown = 0.01
#
# Seconds to suppress updating an account that has generated an error
# account_suppression_time = 60
#
# recon_cache_path = /var/cache/swift
[container-auditor]
# You can override the default log routing for this app here (don't use set!):
# log_name = container-auditor
# log_facility = LOG_LOCAL0
# log_level = INFO
# log_address = /dev/log
#
# Will audit each container at most once per interval
# interval = 1800
#
# containers_per_second = 200
# recon_cache_path = /var/cache/swift
[container-sync]
# You can override the default log routing for this app here (don't use set!):
# log_name = container-sync
# log_facility = LOG_LOCAL0
# log_level = INFO
# log_address = /dev/log
#
# If you need to use an HTTP Proxy, set it here; defaults to no proxy.
# You can also set this to a comma separated list of HTTP Proxies and they will
# be randomly used (simple load balancing).
# sync_proxy = http://10.1.1.1:8888,http://10.1.1.2:8888
#
# Will sync each container at most once per interval
# interval = 300
#
# Maximum amount of time to spend syncing each container per pass
# container_time = 60
# Note: Put it at the beginning of the pipleline to profile all middleware. But
# it is safer to put this after healthcheck.
[filter:xprofile]
use = egg:swift#xprofile
# This option enable you to switch profilers which should inherit from python
# standard profiler. Currently the supported value can be 'cProfile',
# 'eventlet.green.profile' etc.
# profile_module = eventlet.green.profile
#
# This prefix will be used to combine process ID and timestamp to name the
# profile data file. Make sure the executing user has permission to write
# into this path (missing path segments will be created, if necessary).
# If you enable profiling in more than one type of daemon, you must override
# it with an unique value like: /var/log/swift/profile/container.profile
# log_filename_prefix = /tmp/log/swift/profile/default.profile
#
# the profile data will be dumped to local disk based on above naming rule
# in this interval.
# dump_interval = 5.0
#
# Be careful, this option will enable profiler to dump data into the file with
# time stamp which means there will be lots of files piled up in the directory.
# dump_timestamp = false
#
# This is the path of the URL to access the mini web UI.
# path = /__profile__
#
# Clear the data when the wsgi server shutdown.
# flush_at_shutdown = false
#
# unwind the iterator of applications
# unwind = false
View Git Blame Copy Permalink