swift/etc/account-server.conf-sample

[DEFAULT]
# bind_ip = 0.0.0.0
bind_port = 6202
# keep_idle = 600
# bind_timeout = 30
# backlog = 4096
# user = swift
# swift_dir = /etc/swift
# devices = /srv/node
# mount_check = true
# disable_fallocate = false
#
# Use an integer to override the number of pre-forked processes that will
# accept connections.
# workers = auto
#
# Maximum concurrent requests per worker
# max_clients = 1024
#
# You can specify default log routing here if you want:
# log_name = swift
# log_facility = LOG_LOCAL0
# log_level = INFO
# log_address = /dev/log
# The following caps the length of log lines to the value given; no limit if
# set to 0, the default.
# log_max_line_length = 0
#
# Hashing algorithm for log anonymization. Must be one of algorithms supported
# by Python's hashlib.
# log_anonymization_method = MD5
#
# Salt added during log anonymization
# log_anonymization_salt =
#
# Template used to format logs. All words surrounded by curly brackets
# will be substituted with the appropriate values
# log_format = {remote_addr} - - [{time.d}/{time.b}/{time.Y}:{time.H}:{time.M}:{time.S} +0000] "{method} {path}" {status} {content_length} "{referer}" "{txn_id}" "{user_agent}" {trans_time:.4f} "{additional_info}" {pid} {policy_index}
#
# comma separated list of functions to call to setup custom log handlers.
# functions get passed: conf, name, log_to_console, log_route, fmt, logger,
# adapted_logger
# log_custom_handlers =
#
# If set, log_udp_host will override log_address
# log_udp_host =
# log_udp_port = 514
#
# You can enable StatsD logging here:
# log_statsd_host =
# log_statsd_port = 8125
# log_statsd_default_sample_rate = 1.0
# log_statsd_sample_rate_factor = 1.0
# log_statsd_metric_prefix =
#
# If you don't mind the extra disk space usage in overhead, you can turn this
# on to preallocate disk space with SQLite databases to decrease fragmentation.
# db_preallocation = off
#
# eventlet_debug = false
#
# You can set fallocate_reserve to the number of bytes or percentage of disk
# space you'd like fallocate to reserve, whether there is space for the given
# file size or not. Percentage will be used if the value ends with a '%'.
# fallocate_reserve = 1%
#
# You can set scheduling priority of processes. Niceness values range from -20
# (most favorable to the process) to 19 (least favorable to the process).
# nice_priority =
#
# You can set I/O scheduling class and priority of processes. I/O niceness
# class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and
# IOPRIO_CLASS_IDLE (idle). I/O niceness priority is a number which goes from
# 0 to 7. The higher the value, the lower the I/O priority of the process.
# Work only with ionice_class.
# ionice_class =
# ionice_priority =

[pipeline:main]
pipeline = healthcheck recon account-server

[app:account-server]
use = egg:swift#account
# You can override the default log routing for this app here:
# set log_name = account-server
# set log_facility = LOG_LOCAL0
# set log_level = INFO
# set log_requests = true
# set log_address = /dev/log
#
# auto_create_account_prefix = .
#
# Configure parameter for creating specific server
# To handle all verbs, including replication verbs, do not specify
# "replication_server" (this is the default). To only handle replication,
# set to a True value (e.g. "True" or "1"). To handle only non-replication
# verbs, set to "False". Unless you have a separate replication network, you
# should not specify any value for "replication_server". Default is empty.
# replication_server = false
#
# You can set scheduling priority of processes. Niceness values range from -20
# (most favorable to the process) to 19 (least favorable to the process).
# nice_priority =
#
# You can set I/O scheduling class and priority of processes. I/O niceness
# class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and
# IOPRIO_CLASS_IDLE (idle). I/O niceness priority is a number which goes from
# 0 to 7. The higher the value, the lower the I/O priority of the process.
# Work only with ionice_class.
# ionice_class =
# ionice_priority =
#
# You can set fallocate_reserve to the number of bytes or percentage
# of disk space you'd like kept free at all times. If the disk's free
# space falls below this value, then PUT, POST, and REPLICATE requests
# will be denied until the disk ha s more space available. Percentage
# will be used if the value ends with a '%'.
# fallocate_reserve = 1%

[filter:healthcheck]
use = egg:swift#healthcheck
# An optional filesystem path, which if present, will cause the healthcheck
# URL to return "503 Service Unavailable" with a body of "DISABLED BY FILE"
# disable_path =

[filter:recon]
use = egg:swift#recon
# recon_cache_path = /var/cache/swift

[account-replicator]
# You can override the default log routing for this app here (don't use set!):
# log_name = account-replicator
# log_facility = LOG_LOCAL0
# log_level = INFO
# log_address = /dev/log
#
# Maximum number of database rows that will be sync'd in a single HTTP
# replication request. Databases with less than or equal to this number of
# differing rows will always be sync'd using an HTTP replication request rather
# than using rsync.
# per_diff = 1000
#
# Maximum number of HTTP replication requests attempted on each replication
# pass for any one container. This caps how long the replicator will spend
# trying to sync a given database per pass so the other databases don't get
# starved.
# max_diffs = 100
#
# Number of replication workers to spawn.
# concurrency = 8
#
# Time in seconds to wait between replication passes
# interval = 30
# run_pause is deprecated, use interval instead
# run_pause = 30
#
# Process at most this many databases per second
# databases_per_second = 50
#
# node_timeout = 10
# conn_timeout = 0.5
#
# The replicator also performs reclamation
# reclaim_age = 604800
#
# Allow rsync to compress data which is transmitted to destination node
# during sync. However, this is applicable only when destination node is in
# a different region than the local one.
# rsync_compress = no
#
# Format of the rsync module where the replicator will send data. See
# etc/rsyncd.conf-sample for some usage examples.
# rsync_module = {replication_ip}::account
#
# recon_cache_path = /var/cache/swift
#
# You can set scheduling priority of processes. Niceness values range from -20
# (most favorable to the process) to 19 (least favorable to the process).
# nice_priority =
#
# You can set I/O scheduling class and priority of processes. I/O niceness
# class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and
# IOPRIO_CLASS_IDLE (idle). I/O niceness priority is a number which goes from
# 0 to 7. The higher the value, the lower the I/O priority of the process.
# Work only with ionice_class.
# ionice_class =
# ionice_priority =
#
# The handoffs_only mode option is for special-case emergency
# situations such as full disks in the cluster. This option SHOULD NOT
# BE ENABLED except in emergencies. When handoffs_only mode is enabled
# the replicator will *only* replicate from handoff nodes to primary
# nodes and will not sync primary nodes with other primary nodes.
#
# This has two main effects: first, the replicator becomes much more
# effective at removing misplaced databases, thereby freeing up disk
# space at a much faster pace than normal. Second, the replicator does
# not sync data between primary nodes, so out-of-sync account and
# container listings will not resolve while handoffs_only is enabled.
#
# This mode is intended to allow operators to temporarily sacrifice
# consistency in order to gain faster rebalancing, such as during a
# capacity addition with nearly-full disks. It is not intended for
# long-term use.
#
# handoffs_only = no

[account-auditor]
# You can override the default log routing for this app here (don't use set!):
# log_name = account-auditor
# log_facility = LOG_LOCAL0
# log_level = INFO
# log_address = /dev/log
#
# Will audit each account at most once per interval
# interval = 1800
#
# accounts_per_second = 200
# recon_cache_path = /var/cache/swift
#
# You can set scheduling priority of processes. Niceness values range from -20
# (most favorable to the process) to 19 (least favorable to the process).
# nice_priority =
#
# You can set I/O scheduling class and priority of processes. I/O niceness
# class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and
# IOPRIO_CLASS_IDLE (idle). I/O niceness priority is a number which goes from
# 0 to 7. The higher the value, the lower the I/O priority of the process.
# Work only with ionice_class.
# ionice_class =
# ionice_priority =

[account-reaper]
# You can override the default log routing for this app here (don't use set!):
# log_name = account-reaper
# log_facility = LOG_LOCAL0
# log_level = INFO
# log_address = /dev/log
#
# concurrency = 25
# interval = 3600
# node_timeout = 10
# conn_timeout = 0.5
#
# Normally, the reaper begins deleting account information for deleted accounts
# immediately; you can set this to delay its work however. The value is in
# seconds; 2592000 = 30 days for example. The sum of this value and the
# container-updater interval should be less than the account-replicator
# reclaim_age. This ensures that once the account-reaper has deleted a
# container there is sufficient time for the container-updater to report to the
# account before the account DB is removed.
# delay_reaping = 0
#
# If the account fails to be reaped due to a persistent error, the
# account reaper will log a message such as:
#     Account <name> has not been reaped since <date>
# You can search logs for this message if space is not being reclaimed
# after you delete account(s).
# Default is 2592000 seconds (30 days). This is in addition to any time
# requested by delay_reaping.
# reap_warn_after = 2592000
#
# You can set scheduling priority of processes. Niceness values range from -20
# (most favorable to the process) to 19 (least favorable to the process).
# nice_priority =
#
# You can set I/O scheduling class and priority of processes. I/O niceness
# class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and
# IOPRIO_CLASS_IDLE (idle). I/O niceness priority is a number which goes from
# 0 to 7. The higher the value, the lower the I/O priority of the process.
# Work only with ionice_class.
# ionice_class =
# ionice_priority =

# Note: Put it at the beginning of the pipeline to profile all middleware. But
# it is safer to put this after healthcheck.
[filter:xprofile]
use = egg:swift#xprofile
# This option enable you to switch profilers which should inherit from python
# standard profiler. Currently the supported value can be 'cProfile',
# 'eventlet.green.profile' etc.
# profile_module = eventlet.green.profile
#
# This prefix will be used to combine process ID and timestamp to name the
# profile data file.  Make sure the executing user has permission to write
# into this path (missing path segments will be created, if necessary).
# If you enable profiling in more than one type of daemon, you must override
# it with an unique value like: /var/log/swift/profile/account.profile
# log_filename_prefix = /tmp/log/swift/profile/default.profile
#
# the profile data will be dumped to local disk based on above naming rule
# in this interval.
# dump_interval = 5.0
#
# Be careful, this option will enable profiler to dump data into the file with
# time stamp which means there will be lots of files piled up in the directory.
# dump_timestamp = false
#
# This is the path of the URL to access the mini web UI.
# path = /__profile__
#
# Clear the data when the wsgi server shutdown.
# flush_at_shutdown = false
#
# unwind the iterator of applications
# unwind = false