murano-repository/setup.sh
Igor Yozhikov 85db8508b7 Remove openstack- prefix from service name
Change-Id: I806936cb7ef2c9fcd1208b409f6563237e284219
2014-02-19 12:54:07 +04:00

250 lines
8.2 KiB
Bash
Executable File

#!/bin/bash
# Copyright (c) 2014 Mirantis, Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
#
RUN_DIR=$(cd $(dirname "$0") && pwd)
INC_FILE="$RUN_DIR/common.inc"
if [ -f "$INC_FILE" ]; then
source "$INC_FILE"
else
echo "Can't load \"$INC_FILE\" or file not found, exiting!"
exit 1
fi
#
DAEMON_NAME="murano-repository"
DAEMON_USER="murano"
DAEMON_GROUP="murano"
DAEMON_CFG_DIR="/etc/murano"
DAEMON_CACHE_DIR="/var/cache/murano"
DAEMON_LOG_DIR="/var/log/murano"
LOGFILE="/tmp/${DAEMON_NAME}_install.log"
DAEMON_DB_CONSTR="sqlite:///$DAEMON_CFG_DIR/$DAEMON_NAME.sqlite"
common_pkgs="wget git make gcc python-pip python-setuptools"
# Distro-specific package namings
debian_pkgs="python-dev python-mysqldb libxml2-dev libxslt1-dev libffi-dev"
redhat_pkgs="python-devel MySQL-python libxml2-devel libxslt-devel libffi-devel"
#
get_os
eval req_pkgs="\$$(lowercase $DISTRO_BASED_ON)_pkgs"
REQ_PKGS="$common_pkgs $req_pkgs"
function install_prerequisites()
{
retval=0
_dist=$(lowercase $DISTRO_BASED_ON)
if [ $_dist = "redhat" ]; then
yum repolist | grep -qoE "epel"
if [ $? -ne 0 ]; then
log "Enabling EPEL6..."
rpm -ivh http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm >> $LOGFILE 2>&1
if [ $? -ne 0 ]; then
log "... can't enable EPEL6, exiting!"
retval=1
return $retval
fi
fi
yum --quiet makecache
fi
for pack in $REQ_PKGS
do
find_or_install "$pack"
if [ $? -eq 1 ]; then
retval=1
break
else
retval=0
fi
done
return $retval
}
function make_tarball()
{
retval=0
log "Preparing tarball package..."
setuppy="$RUN_DIR/setup.py"
if [ -e "$setuppy" ]; then
chmod +x $setuppy
rm -rf $RUN_DIR/*.egg-info
cd $RUN_DIR && python $setuppy egg_info > /dev/null 2>&1
if [ $? -ne 0 ];then
log "...\"$setuppy\" egg info creation fails, exiting!!!"
retval=1
exit 1
fi
rm -rf $RUN_DIR/dist/*
log "...\"setup.py sdist\" output will be recorded in \"$LOGFILE\""
cd $RUN_DIR && $setuppy sdist >> $LOGFILE 2>&1
if [ $? -ne 0 ];then
log "...\"$setuppy\" tarball creation fails, exiting!!!"
retval=1
exit 1
fi
#TRBL_FILE=$(basename $(ls $RUN_DIR/dist/*.tar.gz | head -n 1))
TRBL_FILE=$(ls $RUN_DIR/dist/*.tar.gz | head -n 1)
if [ ! -e "$TRBL_FILE" ]; then
log "...tarball not found, exiting!"
retval=1
else
log "...success, tarball created as \"$TRBL_FILE\""
retval=0
fi
else
log "...\"$setuppy\" not found, exiting!"
retval=1
fi
return $retval
}
function run_pip_install()
{
find_pip
retval=0
tarball_file=${1:-$TRBL_FILE}
log "Running \"$PIPCMD install $PIPARGS $tarball_file\" output will be recorded in \"$LOGFILE\""
$PIPCMD install $PIPARGS $tarball_file >> $LOGFILE 2>&1
if [ $? -ne 0 ]; then
log "...pip install fails, exiting!"
retval=1
exit 1
fi
return $retval
}
function inject_init()
{
retval=0
_dist=$(lowercase $DISTRO_BASED_ON)
eval src_init_sctipt="$DAEMON_NAME-$_dist"
_initscript="$DAEMON_NAME"
cp -f "$RUN_DIR/etc/init.d/$src_init_sctipt" "/etc/init.d/$_initscript" || retval=$?
chmod +x "/etc/init.d/$_initscript" || retval=$?
iniset '' 'SYSTEM_USER' "$DAEMON_USER" "/etc/init.d/$_initscript"
iniset '' 'DAEMON' "$(shslash $SERVICE_EXEC_PATH)" "/etc/init.d/$_initscript"
iniset '' 'SCRIPTNAME' "$(shslash "/etc/init.d/$_initscript")" "/etc/init.d/$_initscript"
case $_dist in
"debian")
update-rc.d $_initscript defaults || retval=$?
update-rc.d $_initscript enable || retval=$?
;;
*)
chkconfig --add $_initscript || retval=$?
chkconfig $_initscript on || retval=$?
;;
esac
return $retval
}
function purge_init()
{
retval=0
_dist=$(lowercase $DISTRO_BASED_ON)
_initscript="$DAEMON_NAME"
service $_initscript stop
if [ $? -ne 0 ]; then
retval=1
fi
case $_dist in
"debian")
update-rc.d $_initscript disable
update-rc.d -f $_initscript remove || retval=$?
;;
*)
chkconfig $_initscript off || retval=$?
chkconfig --del $_initscript || retval=$?
;;
esac
rm -f "/etc/init.d/$_initscript" || retval=$?
return $retval
}
function run_pip_uninstall()
{
find_pip
retval=0
pack_to_del=$(is_py_package_installed "$DAEMON_NAME")
if [ $? -eq 0 ]; then
log "Running \"$PIPCMD uninstall $PIPARGS $DAEMON_NAME\" output will be recorded in \"$LOGFILE\""
$PIPCMD uninstall $pack_to_del --yes >> $LOGFILE 2>&1
if [ $? -ne 0 ]; then
log "...can't uninstall $DAEMON_NAME with $PIPCMD"
retval=1
else
log "...success"
fi
else
log "Python package for \"$DAEMON_NAME\" not found"
fi
return $retval
}
function install_daemon()
{
install_prerequisites || exit 1
make_tarball || exit $?
run_pip_install || exit $?
add_daemon_credentials "$DAEMON_USER" "$DAEMON_GROUP" || exit $?
log "Creating required directories..."
mk_dir "$DAEMON_CFG_DIR" "$DAEMON_USER" "$DAEMON_GROUP" || exit 1
mk_dir "$DAEMON_CACHE_DIR" "$DAEMON_USER" "$DAEMON_GROUP" || exit 1
mk_dir "$DAEMON_LOG_DIR" "$DAEMON_USER" "$DAEMON_GROUP" || exit 1
log "Making sample configuration files at \"$DAEMON_CFG_DIR\""
_src_conf_dir="$RUN_DIR/etc/murano"
for file in $(ls $_src_conf_dir)
do
#cp -f "$_src_conf_dir/$file" "$DAEMON_CFG_DIR/$file.sample"
cp -f "$_src_conf_dir/$file" "$DAEMON_CFG_DIR/$file"
config_file=$(echo $file | sed -e 's/.sample$//')
#if [ ! -e "$DAEMON_CFG_DIR/$file" ]; then
if [ ! -e "$DAEMON_CFG_DIR/$config_file" ]; then
cp -f "$_src_conf_dir/$file" "$DAEMON_CFG_DIR/$config_file"
else
log "\"$DAEMON_CFG_DIR/$config_file\" exists, skipping copy."
fi
done
log "Setting log file and sqlite db placement..."
iniset 'DEFAULT' 'log_file' "$(shslash $DAEMON_LOG_DIR/$DAEMON_NAME.log)" "$DAEMON_CFG_DIR/$DAEMON_NAME.conf"
iniset 'DEFAULT' 'verbose' 'True' "$DAEMON_CFG_DIR/$DAEMON_NAME.conf"
iniset 'DEFAULT' 'debug' 'True' "$DAEMON_CFG_DIR/$DAEMON_NAME.conf"
iniset 'DEFAULT' 'data_dir' "$(shslash $DAEMON_CACHE_DIR/muranorepository-data)" "$DAEMON_CFG_DIR/$DAEMON_NAME.conf"
log "Searching daemon in \$PATH..."
get_service_exec_path || exit $?
log "...found at \"$SERVICE_EXEC_PATH\""
log "Installing SysV init script."
inject_init || exit $?
log "Everything done, please, verify \"$DAEMON_CFG_DIR/$DAEMON_NAME.conf\", service created as \"${DAEMON_NAME}\"."
}
function uninstall_daemon()
{
log "Removing SysV init script..."
purge_init || exit $?
remove_daemon_credentials "$DAEMON_USER" "$DAEMON_GROUP" || exit $?
run_pip_uninstall || exit $?
log "Software uninstalled, daemon configuration files and logs located at \"$DAEMON_CFG_DIR\" and \"$DAEMON_LOG_DIR\"."
}
# Command line args'
COMMAND="$1"
case $COMMAND in
install)
rm -rf $LOGFILE
log "Installing \"$DAEMON_NAME\" to system..."
install_daemon
;;
uninstall )
log "Uninstalling \"$DAEMON_NAME\" from system..."
uninstall_daemon
;;
* )
echo -e "Usage: $(basename "$0") [command] \nCommands:\n\tinstall - Install \"$DAEMON_NAME\" software\n\tuninstall - Uninstall \"$DAEMON_NAME\" software"
exit 1
;;
esac