starlingx/docs
Code Issues Proposed changes

Merge "Add storage backend configuration instructions"

Browse Source
This commit is contained in:
Zuul 2020-02-20 18:00:02 +00:00 committed by Gerrit Code Review
commit 1d6fc2d7bd
8 changed files with 145 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
doc/source/deploy_install_guides/r4_release/bare_metal/aio_duplex_install_kubernetes.rst
View File

@ -160,12 +160,26 @@ Configure controller-0
system interface-network-assign controller-0 $MGMT_IF mgmt
system interface-network-assign controller-0 $MGMT_IF cluster-host
#. Configure NTP Servers for network time synchronization:
#. Configure NTP servers for network time synchronization:
::
system ntp-modify ntpservers=0.pool.ntp.org,1.pool.ntp.org
#. Configure Ceph storage backend
.. important::
This step is required only if your application requires
persistent storage.
**If you want to install the StarlingX Openstack application
(stx-openstack) this step is mandatory.**
::
system storage-backend-add ceph --confirmed
#. Configure data interfaces for controller-0. Use the DATA port names, for example
eth0, applicable to your deployment environment.
@ -225,6 +239,10 @@ Configure controller-0
#. Add an OSD on controller-0 for Ceph. The following example adds an OSD
to the `sdb` disk:
.. important::
This step requires a configured Ceph storage backend
::
echo ">>> Add OSDs to primary tier"
@ -370,6 +388,10 @@ Configure controller-1
#. Add an OSD on controller-1 for Ceph:
.. important::
This step requires a configured Ceph storage backend
::
echo ">>> Add OSDs to primary tier"

20
doc/source/deploy_install_guides/r4_release/bare_metal/aio_simplex_install_kubernetes.rst
View File

@ -167,12 +167,26 @@ Configure controller-0
system host-if-modify controller-0 $OAM_IF -c platform
system interface-network-assign controller-0 $OAM_IF oam
#. Configure NTP Servers for network time synchronization:
#. Configure NTP servers for network time synchronization:
::
system ntp-modify ntpservers=0.pool.ntp.org,1.pool.ntp.org
#. Configure Ceph storage backend
.. important::
This step required only if your application requires
persistent storage.
**If you want to install the StarlingX Openstack application
(stx-openstack) this step is mandatory.**
::
system storage-backend-add ceph --confirmed
#. Configure data interfaces for controller-0. Use the DATA port names, for example
eth0, applicable to your deployment environment.
@ -232,6 +246,10 @@ Configure controller-0
#. Add an OSD on controller-0 for Ceph. The following example adds an OSD
to the `sdb` disk:
.. important::
This step requires a configured Ceph storage backend
::
echo ">>> Add OSDs to primary tier"

24
doc/source/deploy_install_guides/r4_release/bare_metal/controller_storage_install_kubernetes.rst
View File

@ -187,12 +187,26 @@ Configure controller-0
system interface-network-assign controller-0 $MGMT_IF mgmt
system interface-network-assign controller-0 $MGMT_IF cluster-host
#. Configure NTP Servers for network time synchronization:
#. Configure NTP servers for network time synchronization:
::
system ntp-modify ntpservers=0.pool.ntp.org,1.pool.ntp.org
#. Configure Ceph storage backend
.. important::
This step required only if your application requires
persistent storage.
**If you want to install the StarlingX Openstack application
(stx-openstack) this step is mandatory.**
::
system storage-backend-add ceph --confirmed
*************************************
OpenStack-specific host configuration
*************************************
@ -553,6 +567,10 @@ Add Ceph OSDs to controllers
#. Add OSDs to controller-0. The following example adds OSDs to the `sdb` disk:
.. important::
This step requires a configured Ceph storage backend
::
HOST=controller-0
@ -568,6 +586,10 @@ Add Ceph OSDs to controllers
#. Add OSDs to controller-1. The following example adds OSDs to the `sdb` disk:
.. important::
This step requires a configured Ceph storage backend
::
HOST=controller-1

6
doc/source/deploy_install_guides/r4_release/bare_metal/dedicated_storage_install_kubernetes.rst
View File

@ -45,6 +45,12 @@ Configure controller-0
Unlock controller-0
-------------------
.. important::
Make sure the Ceph storage backend is configured. If it is
not configured, you will not be able to configure storage
nodes.
Unlock controller-0 in order to bring it into service:
::

24
doc/source/deploy_install_guides/r4_release/virtual/aio_duplex_install_kubernetes.rst
View File

@ -163,7 +163,7 @@ On virtual controller-0:
system interface-network-assign controller-0 $MGMT_IF mgmt
system interface-network-assign controller-0 $MGMT_IF cluster-host
#. Configure NTP Servers for network time synchronization:
#. Configure NTP servers for network time synchronization:
.. note::
@ -175,6 +175,20 @@ On virtual controller-0:
system ntp-modify ntpservers=0.pool.ntp.org,1.pool.ntp.org
#. Configure Ceph storage backend
.. important::
This step required only if your application requires
persistent storage.
**If you want to install the StarlingX Openstack application
(stx-openstack) this step is mandatory.**
::
system storage-backend-add ceph --confirmed
#. Configure data interfaces for controller-0.
.. important::
@ -218,6 +232,10 @@ On virtual controller-0:
#. Add an OSD on controller-0 for Ceph:
.. important::
This step requires a configured Ceph storage backend
::
system host-disk-list controller-0
@ -359,6 +377,10 @@ On virtual controller-0:
#. Add an OSD on controller-1 for Ceph:
.. important::
This step requires a configured Ceph storage backend
::
echo ">>> Add OSDs to primary tier"

25
doc/source/deploy_install_guides/r4_release/virtual/aio_simplex_install_kubernetes.rst
View File

@ -13,7 +13,8 @@ on a **StarlingX R4.0 virtual All-in-one Simplex** deployment configuration.
Install software on controller-0
--------------------------------
In the last step of :doc:`aio_simplex_environ`, the controller-0 virtual server 'simplex-controller-0' was started by the :command:`setup_configuration.sh` command.
In the last step of :doc:`aio_simplex_environ`, the controller-0 virtual server 'simplex-controller-0'
was started by the :command:`setup_configuration.sh` command.
On the host, attach to the console of virtual controller-0 and select the
appropriate installer menu options to start the non-interactive install of
@ -153,7 +154,7 @@ On virtual controller-0:
system host-if-modify controller-0 $OAM_IF -c platform
system interface-network-assign controller-0 $OAM_IF oam
#. Configure NTP Servers for network time synchronization:
#. Configure NTP servers for network time synchronization:
.. note::
@ -165,6 +166,20 @@ On virtual controller-0:
system ntp-modify ntpservers=0.pool.ntp.org,1.pool.ntp.org
#. Configure Ceph storage backend
.. important::
This step required only if your application requires
persistent storage.
**If you want to install the StarlingX Openstack application
(stx-openstack) this step is mandatory.**
::
system storage-backend-add ceph --confirmed
#. Configure data interfaces for controller-0.
.. important::
@ -208,6 +223,10 @@ On virtual controller-0:
#. Add an OSD on controller-0 for Ceph:
.. important::
This step requires a configured Ceph storage backend
::
system host-disk-list controller-0
@ -282,4 +301,4 @@ service. This can take 5-10 minutes, depending on the performance of the host ma
Next steps
----------
.. include:: ../kubernetes_install_next.txt
.. include:: ../kubernetes_install_next.txt

24
doc/source/deploy_install_guides/r4_release/virtual/controller_storage_install_kubernetes.rst
View File

@ -172,7 +172,7 @@ On virtual controller-0:
system interface-network-assign controller-0 $MGMT_IF mgmt
system interface-network-assign controller-0 $MGMT_IF cluster-host
#. Configure NTP Servers for network time synchronization:
#. Configure NTP servers for network time synchronization:
.. note::
@ -184,6 +184,20 @@ On virtual controller-0:
system ntp-modify ntpservers=0.pool.ntp.org,1.pool.ntp.org
#. Configure Ceph storage backend
.. important::
This step required only if your application requires
persistent storage.
**If you want to install the StarlingX Openstack application
(stx-openstack) this step is mandatory.**
::
system storage-backend-add ceph --confirmed
*************************************
OpenStack-specific host configuration
*************************************
@ -516,6 +530,10 @@ On virtual controller-0:
#. Add OSDs to controller-0:
.. important::
This step requires a configured Ceph storage backend
::
HOST=controller-0
@ -531,6 +549,10 @@ On virtual controller-0:
#. Add OSDs to controller-1:
.. important::
This step requires a configured Ceph storage backend
::
HOST=controller-1

6
doc/source/deploy_install_guides/r4_release/virtual/dedicated_storage_install_kubernetes.rst
View File

@ -62,6 +62,12 @@ Configure controller-0
Unlock controller-0
-------------------
.. important::
Make sure the Ceph storage backend is configured. If it is
not configured, you will not be able to configure storage
nodes.
Unlock virtual controller-0 in order to bring it into service:
::