Correct capitalization of Ceph

Correct incorrect capitalization of Ceph in docs - make all use
in a sentence 'Ceph'

Change-Id: I43d20c76ae6dfb37fa57a643d0ce9aae14101426
Signed-off-by: Kristal Dale <kristal.dale@intel.com>

doc/source/cli_ref/system.rst

@@ -608,18 +608,18 @@ volume groups, and disk partitions.
     Show disk partition attributes.
 
 ******************
-CEPH configuration
+Ceph configuration
 ******************
 
-The following set of commands is used to configure and manage CEPH OSDs, CEPH
+The following set of commands is used to configure and manage Ceph OSDs, Ceph
-tiers, and CEPH storage cluster backends.
+tiers, and Ceph storage cluster backends.
 
 ``ceph-mon-add``
 
 ``ceph-mon-delete``
 
 ``ceph-mon-list``
-    List CEPH mons.
+    List Ceph mons.
 
 ``ceph-mon-modify``
 

doc/source/deploy_install_guides/r1_release/dedicated_storage.rst

@@ -35,7 +35,7 @@ Cloud with Dedicated Storage includes:
   nodes in either active/active or active/standby mode.
 - Pool of up to 100 compute nodes for hosting virtual machines and virtual
   networks.
-- 2-9x node HA CEPH storage cluster for hosting virtual volumes, images, and
+- 2-9x node HA Ceph storage cluster for hosting virtual volumes, images, and
   object storage that supports a replication factor of 2 or 3.
 
   Storage nodes are deployed in replication groups of 2 or 3. Replication
@@ -320,7 +320,7 @@ Set up one provider network of the vlan type, named providernet-a:
 Adding a Ceph storage backend at installation
 *********************************************
 
-Add CEPH Storage backend:
+Add Ceph Storage backend:
 
 ::
 
@@ -350,7 +350,7 @@ Add CEPH Storage backend:
    | 55f49f86-3e01-4d03-a014-42e1b55ba487 | file-store | file    | configured  | None               | glance   |...
    +--------------------------------------+------------+---------+-------------+--------------------+----------+...
 
-Confirm CEPH storage is configured:
+Confirm Ceph storage is configured:
 
 ::
 
@@ -871,7 +871,7 @@ unlocked, enabled, and available:
    +----+--------------+-------------+----------------+-------------+--------------+
 
 ******************************
-Checking StarlingX CEPH health
+Checking StarlingX Ceph health
 ******************************
 
 ::

doc/source/deploy_install_guides/r2_release/bare_metal/aio_duplex_install_kubernetes.rst

@@ -220,7 +220,7 @@ Configure controller-0
       system interface-datanetwork-assign ${COMPUTE} ${DATA0IFUUID} ${PHYSNET0}
       system interface-datanetwork-assign ${COMPUTE} ${DATA1IFUUID} ${PHYSNET1}
 
-#. Add an OSD on controller-0 for ceph. The following example adds an OSD
+#. Add an OSD on controller-0 for Ceph. The following example adds an OSD
    to the `sdb` disk:
 
    ::
@@ -366,7 +366,7 @@ Configure controller-1
       system interface-datanetwork-assign ${COMPUTE} ${DATA0IFUUID} ${PHYSNET0}
       system interface-datanetwork-assign ${COMPUTE} ${DATA1IFUUID} ${PHYSNET1}
 
-#. Add an OSD on controller-1 for ceph:
+#. Add an OSD on controller-1 for Ceph:
 
    ::
 

doc/source/deploy_install_guides/r2_release/bare_metal/aio_simplex_install_kubernetes.rst

@@ -227,7 +227,7 @@ Configure controller-0
      system interface-datanetwork-assign ${COMPUTE} ${DATA0IFUUID} ${PHYSNET0}
      system interface-datanetwork-assign ${COMPUTE} ${DATA1IFUUID} ${PHYSNET1}
 
-#. Add an OSD on controller-0 for ceph. The following example adds an OSD
+#. Add an OSD on controller-0 for Ceph. The following example adds an OSD
    to the `sdb` disk:
 
    ::

doc/source/deploy_install_guides/r2_release/virtual/aio_duplex_install_kubernetes.rst

@@ -215,7 +215,7 @@ On virtual controller-0:
       system interface-datanetwork-assign ${COMPUTE} ${DATA0IFUUID} ${PHYSNET0}
       system interface-datanetwork-assign ${COMPUTE} ${DATA1IFUUID} ${PHYSNET1}
 
-#. Add an OSD on controller-0 for ceph:
+#. Add an OSD on controller-0 for Ceph:
 
    ::
 
@@ -356,7 +356,7 @@ On virtual controller-0:
       system interface-datanetwork-assign ${COMPUTE} ${DATA0IFUUID} ${PHYSNET0}
       system interface-datanetwork-assign ${COMPUTE} ${DATA1IFUUID} ${PHYSNET1}
 
-#. Add an OSD on controller-1 for ceph:
+#. Add an OSD on controller-1 for Ceph:
 
    ::
 

doc/source/deploy_install_guides/r2_release/virtual/aio_simplex_install_kubernetes.rst

@@ -205,7 +205,7 @@ On virtual controller-0:
     system interface-datanetwork-assign ${COMPUTE} ${DATA0IFUUID} ${PHYSNET0}
     system interface-datanetwork-assign ${COMPUTE} ${DATA1IFUUID} ${PHYSNET1}
 
-#. Add an OSD on controller-0 for ceph:
+#. Add an OSD on controller-0 for Ceph:
 
    ::
 

doc/source/deploy_install_guides/r3_release/bare_metal/aio_duplex_install_kubernetes.rst

@@ -222,7 +222,7 @@ Configure controller-0
       system interface-datanetwork-assign ${COMPUTE} ${DATA0IFUUID} ${PHYSNET0}
       system interface-datanetwork-assign ${COMPUTE} ${DATA1IFUUID} ${PHYSNET1}
 
-#. Add an OSD on controller-0 for ceph. The following example adds an OSD
+#. Add an OSD on controller-0 for Ceph. The following example adds an OSD
    to the `sdb` disk:
 
    ::
@@ -368,7 +368,7 @@ Configure controller-1
       system interface-datanetwork-assign ${COMPUTE} ${DATA0IFUUID} ${PHYSNET0}
       system interface-datanetwork-assign ${COMPUTE} ${DATA1IFUUID} ${PHYSNET1}
 
-#. Add an OSD on controller-1 for ceph:
+#. Add an OSD on controller-1 for Ceph:
 
    ::
 

doc/source/deploy_install_guides/r3_release/bare_metal/aio_simplex_install_kubernetes.rst

@@ -229,7 +229,7 @@ Configure controller-0
      system interface-datanetwork-assign ${COMPUTE} ${DATA0IFUUID} ${PHYSNET0}
      system interface-datanetwork-assign ${COMPUTE} ${DATA1IFUUID} ${PHYSNET1}
 
-#. Add an OSD on controller-0 for ceph. The following example adds an OSD
+#. Add an OSD on controller-0 for Ceph. The following example adds an OSD
    to the `sdb` disk:
 
    ::

doc/source/deploy_install_guides/r3_release/virtual/aio_duplex_install_kubernetes.rst

@@ -216,7 +216,7 @@ On virtual controller-0:
       system interface-datanetwork-assign ${COMPUTE} ${DATA0IFUUID} ${PHYSNET0}
       system interface-datanetwork-assign ${COMPUTE} ${DATA1IFUUID} ${PHYSNET1}
 
-#. Add an OSD on controller-0 for ceph:
+#. Add an OSD on controller-0 for Ceph:
 
    ::
 
@@ -357,7 +357,7 @@ On virtual controller-0:
       system interface-datanetwork-assign ${COMPUTE} ${DATA0IFUUID} ${PHYSNET0}
       system interface-datanetwork-assign ${COMPUTE} ${DATA1IFUUID} ${PHYSNET1}
 
-#. Add an OSD on controller-1 for ceph:
+#. Add an OSD on controller-1 for Ceph:
 
    ::
 

doc/source/deploy_install_guides/r3_release/virtual/aio_simplex_install_kubernetes.rst

@@ -206,7 +206,7 @@ On virtual controller-0:
     system interface-datanetwork-assign ${COMPUTE} ${DATA0IFUUID} ${PHYSNET0}
     system interface-datanetwork-assign ${COMPUTE} ${DATA1IFUUID} ${PHYSNET1}
 
-#. Add an OSD on controller-0 for ceph:
+#. Add an OSD on controller-0 for Ceph:
 
    ::
 

doc/source/releasenotes/r2_release.rst

@@ -138,7 +138,7 @@ StoryBoard entries for the features.
   `2003395, <https://storyboard.openstack.org/#!/story/2003395>`_
   `2005212 <https://storyboard.openstack.org/#!/story/2005212>`_
 
-* ceph upgrade to mimic:
+* Ceph upgrade to mimic:
 
   `2004540, <https://storyboard.openstack.org/#!/story/2004540>`_
   `2003605 <https://storyboard.openstack.org/#!/story/2003605>`_