starlingx/docs
Code Issues Proposed changes

Install guide issues

Browse Source 
Worked on bugs

Fixed upstream command and added partner only

Applied same updates to other install guides as requested

Applied updated to r6_release

Fixed indentation

Applied requested changes in commands

Signed-off-by: egoncalv <elisamaraaoki.goncalves@windriver.com>
Change-Id: I7bca7253c288e335d035a621afdb86e3790ebb55
This commit is contained in:
egoncalv 2021-07-27 16:29:46 -03:00
parent 5626ddfe04
commit 541989253c
9 changed files with 167 additions and 114 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
doc/source/_includes/aio_duplex_install_kubernetes.rest Normal file
View File

@ -0,0 +1,5 @@
.. ref1-begin
.. ref1-end
.. ref2-begin
.. ref2-end

2
doc/source/_includes/aio_simplex_install_kubernetes.rest Normal file
View File

@ -0,0 +1,2 @@
.. ref1-begin
.. ref1-end

2
doc/source/_includes/rook_storage_install_kubernetes.rest Normal file
View File

@ -0,0 +1,2 @@
.. ref1-begin
.. ref1-end

82
doc/source/deploy_install_guides/r5_release/bare_metal/aio_duplex_install_kubernetes.rst
View File

@ -227,11 +227,11 @@ Configure controller-0
ethernet port. Use the |OAM| port name that is applicable to your
deployment environment, for example eth0:
.. code-block:: bash
.. code-block:: bash
OAM_IF=<OAM-PORT>
system host-if-modify controller-0 $OAM_IF -c platform
system interface-network-assign controller-0 $OAM_IF oam
OAM_IF=<OAM-PORT>
system host-if-modify controller-0 $OAM_IF -c platform
system interface-network-assign controller-0 $OAM_IF oam
To configure a vlan or aggregated ethernet interface, see :ref:`Node
Interfaces <node-interfaces-index>`.
@ -264,7 +264,7 @@ Configure controller-0
system ntp-modify ntpservers=0.pool.ntp.org,1.pool.ntp.org
To configure |PTP| instead of |NTP|, see ref:`PTP Server Configuration
To configure |PTP| instead of |NTP|, see :ref:`PTP Server Configuration
<ptp-server-config-index>`.
.. only:: openstack
@ -281,12 +281,20 @@ Configure controller-0
#. **For OpenStack only:** Assign OpenStack host labels to controller-0 in
support of installing the stx-openstack manifest and helm-charts later.
::
.. only:: starlingx
system host-label-assign controller-0 openstack-control-plane=enabled
system host-label-assign controller-0 openstack-compute-node=enabled
system host-label-assign controller-0 openvswitch=enabled
system host-label-assign controller-0 sriov=enabled
::
system host-label-assign controller-0 openstack-control-plane=enabled
system host-label-assign controller-0 openstack-compute-node=enabled
system host-label-assign controller-0 openvswitch=enabled
system host-label-assign controller-0 sriov=enabled
.. only:: partner
.. include:: /_includes/aio_duplex_install_kubernetes.rest
:start-after: ref1-begin
:end-before: ref1-end
#. **For OpenStack only:** Due to the additional openstack services running
on the |AIO| controller platform cores, a minimum of 4 platform cores are
@ -306,9 +314,9 @@ Configure controller-0
.. code-block:: bash
# check existing size of docker fs
system host-fs-list controller-1
system host-fs-list controller-0
# check available space (Avail Size (GiB)) in cgts-vg LVG where docker fs is located
system host-lvg-list controller-1
system host-lvg-list controller-0
# if existing docker fs size + cgts-vg available space is less than 60G,
# you will need to add a new disk partition to cgts-vg
@ -316,22 +324,22 @@ Configure controller-0
# ( if not use another unused disk )
# Get device path of ROOT DISK
system host-show controller-1 --nowrap | fgrep rootfs
system host-show controller-0 --nowrap | fgrep rootfs
# Get UUID of ROOT DISK by listing disks
system host-disk-list controller-1
system host-disk-list controller-0
# Create new PARTITION on ROOT DISK, and take note of new partition’s ‘uuid’ in response
# Use a partition size such that you’ll be able to increase docker fs size from 30G to 60G
PARTITION_SIZE=30
system hostdisk-partition-add -t lvm_phys_vol controller-1 <root-disk-uuid> ${PARTITION_SIZE}
system system host-disk-partition-add -t lvm_phys_vol controller-0 <root-disk-uuid> ${PARTITION_SIZE}
# Add new partition to ‘cgts-vg’ local volume group
system host-pv-add controller-1 cgts-vg <NEW_PARTITION_UUID>
system host-pv-add controller-0 cgts-vg <NEW_PARTITION_UUID>
sleep 2 # wait for partition to be added
# Increase docker filesystem to 60G
system host-fs-modify controller-1 docker=60
system host-fs-modify controller-0 docker=60
#. **For OpenStack only:** Configure the system setting for the vSwitch.
@ -445,7 +453,7 @@ Configure controller-0
# root disk, if that is what you chose above.
# Additional PARTITION(s) from additional disks can be added later if required.
PARTITION_SIZE=30
system hostdisk-partition-add -t lvm_phys_vol ${NODE} <disk-uuid> ${PARTITION_SIZE}
system host-disk-partition-add -t lvm_phys_vol ${NODE} <disk-uuid> ${PARTITION_SIZE}
# Add new partition to ‘nova-local’ local volume group
system host-pv-add ${NODE} nova-local <NEW_PARTITION_UUID>
@ -484,8 +492,6 @@ Configure controller-0
# Create Data Networks that vswitch 'data' interfaces will be connected to
DATANET0='datanet0'
DATANET1='datanet1'
system datanetwork-add ${DATANET0} vlan
system datanetwork-add ${DATANET1} vlan
# Assign Data Networks to Data Interfaces
system interface-datanetwork-assign ${NODE} <data0-if-uuid> ${DATANET0}
@ -599,11 +605,7 @@ For host-based Ceph:
# List OSD storage devices
system host-stor-list controller-0
# Add disk as an OSD storage
system host-stor-add controller-0 osd <disk-uuid>
.. only:: starlingx
.. only:: starlingx
For Rook container-based Ceph:
@ -720,12 +722,20 @@ Configure controller-1
#. **For OpenStack only:** Assign OpenStack host labels to controller-1 in
support of installing the |prefix|-openstack manifest and helm-charts later.
::
.. only:: starlingx
system host-label-assign controller-1 openstack-control-plane=enabled
system host-label-assign controller-1 openstack-compute-node=enabled
system host-label-assign controller-1 openvswitch=enabled
system host-label-assign controller-1 sriov=enabled
::
system host-label-assign controller-1 openstack-control-plane=enabled
system host-label-assign controller-1 openstack-compute-node=enabled
system host-label-assign controller-1 openvswitch=enabled
system host-label-assign controller-1 sriov=enabled
.. only:: partner
.. include:: /_includes/aio_duplex_install_kubernetes.rest
:start-after: ref2-begin
:end-before: ref2-end
#. **For OpenStack only:** Due to the additional openstack services running
on the |AIO| controller platform cores, a minimum of 4 platform cores are
@ -826,6 +836,8 @@ Configure controller-1
.. code-block:: bash
export NODE=controller-1
# Create ‘nova-local’ local volume group
system host-lvg-add ${NODE} nova-local
@ -847,7 +859,7 @@ Configure controller-1
# Additional PARTITION(s) from additional disks can be added later if required.
PARTITION_SIZE=30
system hostdisk-partition-add -t lvm_phys_vol ${NODE} <disk-uuid> ${PARTITION_SIZE}
system host-disk-partition-add -t lvm_phys_vol ${NODE} <disk-uuid> ${PARTITION_SIZE}
# Add new partition to ‘nova-local’ local volume group
system host-pv-add ${NODE} nova-local <NEW_PARTITION_UUID>
@ -885,8 +897,6 @@ Configure controller-1
# Create Data Networks that vswitch 'data' interfaces will be connected to
DATANET0='datanet0'
DATANET1='datanet1'
system datanetwork-add ${DATANET0} vlan
system datanetwork-add ${DATANET1} vlan
# Assign Data Networks to Data Interfaces
system interface-datanetwork-assign ${NODE} <data0-if-uuid> ${DATANET0}
@ -932,8 +942,6 @@ Optionally Configure PCI-SRIOV Interfaces
# will be connected to
DATANET0='datanet0'
DATANET1='datanet1'
system datanetwork-add ${DATANET0} vlan
system datanetwork-add ${DATANET1} vlan
# Assign Data Networks to PCI-SRIOV Interfaces
system interface-datanetwork-assign ${NODE} <sriov0-if-uuid> ${DATANET0}
@ -982,10 +990,6 @@ For host-based Ceph:
# List OSD storage devices
system host-stor-list controller-1
# Add disk as an OSD storage
system host-stor-add controller-1 osd <disk-uuid>
.. only:: starlingx
For Rook container-based Ceph:

39
doc/source/deploy_install_guides/r5_release/bare_metal/aio_simplex_install_kubernetes.rst
View File

@ -232,8 +232,8 @@ The newly installed controller needs to be configured.
system host-if-modify controller-0 $OAM_IF -c platform
system interface-network-assign controller-0 $OAM_IF oam
To configure a vlan or aggregated ethernet interface, see :ref:`Node
Interfaces <node-interfaces-index>`.
To configure a vlan or aggregated ethernet interface, see :ref:`Node
Interfaces <node-interfaces-index>`.
#. Configure |NTP| servers for network time synchronization:
::
@ -259,12 +259,21 @@ The newly installed controller needs to be configured.
#. **For OpenStack only:** Assign OpenStack host labels to controller-0 in
support of installing the stx-openstack manifest and helm-charts later.
::
system host-label-assign controller-0 openstack-control-plane=enabled
system host-label-assign controller-0 openstack-compute-node=enabled
system host-label-assign controller-0 openvswitch=enabled
system host-label-assign controller-0 sriov=enabled
.. only:: starlingx
::
system host-label-assign controller-0 openstack-control-plane=enabled
system host-label-assign controller-0 openstack-compute-node=enabled
system host-label-assign controller-0 openvswitch=enabled
system host-label-assign controller-0 sriov=enabled
.. only:: partner
.. include:: /_includes/aio_simplex_install_kubernetes.rest
:start-after: ref1-begin
:end-before: ref1-end
#. **For OpenStack only:** Due to the additional openstack services running
on the |AIO| controller platform cores, a minimum of 4 platform cores are
@ -284,9 +293,9 @@ The newly installed controller needs to be configured.
.. code-block:: bash
# check existing size of docker fs
system host-fs-list controller-1
system host-fs-list controller-0
# check available space (Avail Size (GiB)) in cgts-vg LVG where docker fs is located
system host-lvg-list controller-1
system host-lvg-list controller-0
# if existing docker fs size + cgts-vg available space is less than 60G,
# you will need to add a new disk partition to cgts-vg
@ -294,22 +303,22 @@ The newly installed controller needs to be configured.
# ( if not use another unused disk )
# Get device path of ROOT DISK
system host-show controller-1 --nowrap | fgrep rootfs
system host-show controller-0 --nowrap | fgrep rootfs
# Get UUID of ROOT DISK by listing disks
system host-disk-list controller-1
system host-disk-list controller-0
# Create new PARTITION on ROOT DISK, and take note of new partition’s ‘uuid’ in response
# Use a partition size such that you’ll be able to increase docker fs size from 30G to 60G
PARTITION_SIZE=30
system hostdisk-partition-add -t lvm_phys_vol controller-1 <root-disk-uuid> ${PARTITION_SIZE}
system hostdisk-partition-add -t lvm_phys_vol controller-0 <root-disk-uuid> ${PARTITION_SIZE}
# Add new partition to ‘cgts-vg’ local volume group
system host-pv-add controller-1 cgts-vg <NEW_PARTITION_UUID>
system host-pv-add controller-0 cgts-vg <NEW_PARTITION_UUID>
sleep 2 # wait for partition to be added
# Increase docker filesystem to 60G
system host-fs-modify controller-1 docker=60
system host-fs-modify controller-0 docker=60
#. **For OpenStack only:** Configure the system setting for the vSwitch.
@ -420,7 +429,7 @@ The newly installed controller needs to be configured.
# Additional PARTITION(s) from additional disks can be added later if required.
PARTITION_SIZE=30
system hostdisk-partition-add -t lvm_phys_vol ${NODE} <disk-uuid> ${PARTITION_SIZE}
system host-disk-partition-add -t lvm_phys_vol ${NODE} <disk-uuid> ${PARTITION_SIZE}
# Add new partition to ‘nova-local’ local volume group
system host-pv-add ${NODE} nova-local <NEW_PARTITION_UUID>

21
doc/source/deploy_install_guides/r5_release/bare_metal/rook_storage_install_kubernetes.rst
View File

@ -588,13 +588,22 @@ OpenStack-specific host configuration
#. **For OpenStack only:** Assign OpenStack host labels to the worker nodes in
support of installing the stx-openstack manifest and helm-charts later.
.. code-block:: bash
for NODE in worker-0 worker-1; do
system host-label-assign $NODE openstack-compute-node=enabled
system host-label-assign $NODE openvswitch=enabled
system host-label-assign $NODE sriov=enabled
done
.. only:: starlingx
.. code-block:: bash
for NODE in worker-0 worker-1; do
system host-label-assign $NODE openstack-compute-node=enabled
system host-label-assign $NODE openvswitch=enabled
system host-label-assign $NODE sriov=enabled
done
.. only:: partner
.. include:: /_includes/rook_storage_install_kubernetes.rest
:start-after: ref1-begin
:end-before: ref1-end
#. **For OpenStack only:** Set up disk partition for nova-local volume group,
which is needed for stx-openstack nova ephemeral disks.

74
doc/source/deploy_install_guides/r6_release/bare_metal/aio_duplex_install_kubernetes.rst
View File

@ -264,8 +264,8 @@ Configure controller-0
system ntp-modify ntpservers=0.pool.ntp.org,1.pool.ntp.org
To configure |PTP| instead of |NTP|, see ref:`PTP Server Configuration
<ptp-server-config-index>`.
To configure |PTP| instead of |NTP|, see :ref:`PTP Server Configuration
<ptp-server-config-index>`.
.. only:: openstack
@ -281,12 +281,20 @@ Configure controller-0
#. **For OpenStack only:** Assign OpenStack host labels to controller-0 in
support of installing the stx-openstack manifest and helm-charts later.
::
.. only:: starlingx
system host-label-assign controller-0 openstack-control-plane=enabled
system host-label-assign controller-0 openstack-compute-node=enabled
system host-label-assign controller-0 openvswitch=enabled
system host-label-assign controller-0 sriov=enabled
::
system host-label-assign controller-0 openstack-control-plane=enabled
system host-label-assign controller-0 openstack-compute-node=enabled
system host-label-assign controller-0 openvswitch=enabled
system host-label-assign controller-0 sriov=enabled
.. only:: partner
.. include:: /_includes/aio_duplex_install_kubernetes.rest
:start-after: ref1-begin
:end-before: ref1-end
#. **For OpenStack only:** Due to the additional openstack services running
on the |AIO| controller platform cores, a minimum of 4 platform cores are
@ -306,9 +314,9 @@ Configure controller-0
.. code-block:: bash
# check existing size of docker fs
system host-fs-list controller-1
system host-fs-list controller-0
# check available space (Avail Size (GiB)) in cgts-vg LVG where docker fs is located
system host-lvg-list controller-1
system host-lvg-list controller-0
# if existing docker fs size + cgts-vg available space is less than 60G,
# you will need to add a new disk partition to cgts-vg
@ -316,22 +324,22 @@ Configure controller-0
# ( if not use another unused disk )
# Get device path of ROOT DISK
system host-show controller-1 --nowrap | fgrep rootfs
system host-show controller-0 --nowrap | fgrep rootfs
# Get UUID of ROOT DISK by listing disks
system host-disk-list controller-1
system host-disk-list controller-0
# Create new PARTITION on ROOT DISK, and take note of new partition’s ‘uuid’ in response
# Use a partition size such that you’ll be able to increase docker fs size from 30G to 60G
PARTITION_SIZE=30
system hostdisk-partition-add -t lvm_phys_vol controller-1 <root-disk-uuid> ${PARTITION_SIZE}
system host-disk-partition-add -t lvm_phys_vol ${NODE} <disk-uuid> ${PARTITION_SIZE}
# Add new partition to ‘cgts-vg’ local volume group
system host-pv-add controller-1 cgts-vg <NEW_PARTITION_UUID>
system host-pv-add controller-0 cgts-vg <NEW_PARTITION_UUID>
sleep 2 # wait for partition to be added
# Increase docker filesystem to 60G
system host-fs-modify controller-1 docker=60
system host-fs-modify controller-0 docker=60
#. **For OpenStack only:** Configure the system setting for the vSwitch.
@ -449,7 +457,7 @@ Configure controller-0
# Additional PARTITION(s) from additional disks can be added later if required.
PARTITION_SIZE=30
system hostdisk-partition-add -t lvm_phys_vol ${NODE} <disk-uuid> ${PARTITION_SIZE}
system host-disk-partition-add -t lvm_phys_vol ${NODE} <disk-uuid> ${PARTITION_SIZE}
# Add new partition to ‘nova-local’ local volume group
system host-pv-add ${NODE} nova-local <NEW_PARTITION_UUID>
@ -603,10 +611,6 @@ For host-based Ceph:
# List OSD storage devices
system host-stor-list controller-0
# Add disk as an OSD storage
system host-stor-add controller-0 osd <disk-uuid>
.. only:: starlingx
For Rook container-based Ceph:
@ -724,12 +728,20 @@ Configure controller-1
#. **For OpenStack only:** Assign OpenStack host labels to controller-1 in
support of installing the |prefix|-openstack manifest and helm-charts later.
::
.. only:: starlingx
system host-label-assign controller-1 openstack-control-plane=enabled
system host-label-assign controller-1 openstack-compute-node=enabled
system host-label-assign controller-1 openvswitch=enabled
system host-label-assign controller-1 sriov=enabled
::
system host-label-assign controller-1 openstack-control-plane=enabled
system host-label-assign controller-1 openstack-compute-node=enabled
system host-label-assign controller-1 openvswitch=enabled
system host-label-assign controller-1 sriov=enabled
.. only:: partner
.. include:: /_includes/aio_duplex_install_kubernetes.rest
:start-after: ref2-begin
:end-before: ref2-end
#. **For OpenStack only:** Due to the additional openstack services running
on the |AIO| controller platform cores, a minimum of 4 platform cores are
@ -832,6 +844,8 @@ Configure controller-1
.. code-block:: bash
export NODE=controller-1
# Create ‘nova-local’ local volume group
system host-lvg-add ${NODE} nova-local
@ -853,7 +867,7 @@ Configure controller-1
# Additional PARTITION(s) from additional disks can be added later if required.
PARTITION_SIZE=30
system hostdisk-partition-add -t lvm_phys_vol ${NODE} <disk-uuid> ${PARTITION_SIZE}
system host-disk-partition-add -t lvm_phys_vol ${NODE} <disk-uuid> ${PARTITION_SIZE}
# Add new partition to ‘nova-local’ local volume group
system host-pv-add ${NODE} nova-local <NEW_PARTITION_UUID>
@ -891,8 +905,6 @@ Configure controller-1
# Create Data Networks that vswitch 'data' interfaces will be connected to
DATANET0='datanet0'
DATANET1='datanet1'
system datanetwork-add ${DATANET0} vlan
system datanetwork-add ${DATANET1} vlan
# Assign Data Networks to Data Interfaces
system interface-datanetwork-assign ${NODE} <data0-if-uuid> ${DATANET0}
@ -938,8 +950,6 @@ Optionally Configure PCI-SRIOV Interfaces
# will be connected to
DATANET0='datanet0'
DATANET1='datanet1'
system datanetwork-add ${DATANET0} vlan
system datanetwork-add ${DATANET1} vlan
# Assign Data Networks to PCI-SRIOV Interfaces
system interface-datanetwork-assign ${NODE} <sriov0-if-uuid> ${DATANET0}
@ -988,11 +998,7 @@ For host-based Ceph:
# List OSD storage devices
system host-stor-list controller-1
# Add disk as an OSD storage
system host-stor-add controller-1 osd <disk-uuid>
.. only:: starlingx
.. only:: starlingx
For Rook container-based Ceph:

34
doc/source/deploy_install_guides/r6_release/bare_metal/aio_simplex_install_kubernetes.rst
View File

@ -259,12 +259,20 @@ The newly installed controller needs to be configured.
#. **For OpenStack only:** Assign OpenStack host labels to controller-0 in
support of installing the stx-openstack manifest and helm-charts later.
::
.. only:: starlingx
system host-label-assign controller-0 openstack-control-plane=enabled
system host-label-assign controller-0 openstack-compute-node=enabled
system host-label-assign controller-0 openvswitch=enabled
system host-label-assign controller-0 sriov=enabled
::
system host-label-assign controller-0 openstack-control-plane=enabled
system host-label-assign controller-0 openstack-compute-node=enabled
system host-label-assign controller-0 openvswitch=enabled
system host-label-assign controller-0 sriov=enabled
.. only:: partner
.. include:: /_includes/aio_simplex_install_kubernetes.rest
:start-after: ref1-begin
:end-before: ref1-end
#. **For OpenStack only:** Due to the additional openstack services running
on the |AIO| controller platform cores, a minimum of 4 platform cores are
@ -284,9 +292,9 @@ The newly installed controller needs to be configured.
.. code-block:: bash
# check existing size of docker fs
system host-fs-list controller-1
system host-fs-list controller-0
# check available space (Avail Size (GiB)) in cgts-vg LVG where docker fs is located
system host-lvg-list controller-1
system host-lvg-list controller-0
# if existing docker fs size + cgts-vg available space is less than 60G,
# you will need to add a new disk partition to cgts-vg
@ -294,22 +302,22 @@ The newly installed controller needs to be configured.
# ( if not use another unused disk )
# Get device path of ROOT DISK
system host-show controller-1 --nowrap | fgrep rootfs
system host-show controller-0 --nowrap | fgrep rootfs
# Get UUID of ROOT DISK by listing disks
system host-disk-list controller-1
system host-disk-list controller-0
# Create new PARTITION on ROOT DISK, and take note of new partition’s ‘uuid’ in response
# Use a partition size such that you’ll be able to increase docker fs size from 30G to 60G
PARTITION_SIZE=30
system hostdisk-partition-add -t lvm_phys_vol controller-1 <root-disk-uuid> ${PARTITION_SIZE}
system hostdisk-partition-add -t lvm_phys_vol controller-0 <root-disk-uuid> ${PARTITION_SIZE}
# Add new partition to ‘cgts-vg’ local volume group
system host-pv-add controller-1 cgts-vg <NEW_PARTITION_UUID>
system host-pv-add controller-0 cgts-vg <NEW_PARTITION_UUID>
sleep 2 # wait for partition to be added
# Increase docker filesystem to 60G
system host-fs-modify controller-1 docker=60
system host-fs-modify controller-0 docker=60
#. **For OpenStack only:** Configure the system setting for the vSwitch.
@ -419,7 +427,7 @@ The newly installed controller needs to be configured.
# Additional PARTITION(s) from additional disks can be added later if required.
PARTITION_SIZE=30
system hostdisk-partition-add -t lvm_phys_vol ${NODE} <disk-uuid> ${PARTITION_SIZE}
system host-disk-partition-add -t lvm_phys_vol ${NODE} <disk-uuid> ${PARTITION_SIZE}
# Add new partition to ‘nova-local’ local volume group
system host-pv-add ${NODE} nova-local <NEW_PARTITION_UUID>

22
doc/source/deploy_install_guides/r6_release/bare_metal/rook_storage_install_kubernetes.rst
View File

@ -118,7 +118,7 @@ Bootstrap system on controller-0
as shown in the example below. Use the OAM IP SUBNET and IP ADDRESSing
applicable to your deployment environment.
.. code-block:: bash
::
cd ~
cat <<EOF > localhost.yml
@ -589,13 +589,21 @@ OpenStack-specific host configuration
#. **For OpenStack only:** Assign OpenStack host labels to the worker nodes in
support of installing the stx-openstack manifest and helm-charts later.
::
.. only:: starlingx
for NODE in worker-0 worker-1; do
system host-label-assign $NODE openstack-compute-node=enabled
system host-label-assign $NODE openvswitch=enabled
system host-label-assign $NODE sriov=enabled
done
.. code-block:: bash
for NODE in worker-0 worker-1; do
system host-label-assign $NODE openstack-compute-node=enabled
system host-label-assign $NODE openvswitch=enabled
system host-label-assign $NODE sriov=enabled
done
.. only:: partner
.. include:: /_includes/rook_storage_install_kubernetes.rest
:start-after: ref1-begin
:end-before: ref1-end
#. **For OpenStack only:** Set up disk partition for nova-local volume group,
which is needed for stx-openstack nova ephemeral disks.