starlingx/docs
Code Issues Proposed changes

Clarify upgrade procedure to prevent lack of free space

Browse Source 
Change-Id: I0ae9b3e79e7648f36fdb811daa314464466ecf10
Signed-off-by: Keane Lim <keane.lim@windriver.com>
This commit is contained in:
Keane Lim 2021-09-21 12:22:48 -04:00
parent 02bb1768b4
commit ba78f1e682
3 changed files with 23 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
doc/source/updates/kubernetes/manual-upgrade-overview.rst
View File

@ -23,10 +23,17 @@ This section describes the manual upgrade procedures.
procedure, see |distcloud-doc|: :ref:`Orchestration Upgrade Overview
<orchestration-upgrade-overview>`.
Before starting the upgrades process, the system must be “patch current,” there
must be no management-affecting alarms present on the system, the new software
load must be imported, and a valid license file for the upgrade must be
installed.
Before starting the upgrade process, ensure that the following conditions are
met:
- The system is patch current.
- There are no management-affecting alarms and the "system
health-query-upgrade" check passes.
- The new software load has been imported.
- A valid license file has been installed.
The upgrade procedure is different for the All-in-One Simplex configuration
versus the All-in-One Duplex, and Standard configurations. For more

4
doc/source/updates/kubernetes/upgrading-all-in-one-duplex-or-standard.rst
View File

@ -21,8 +21,8 @@ of |prod| software.
restore operations, blade replacement, or upgrades.
- The system must be "patch current". All updates available for the current
release running on the system must be applied. To find and download
applicable updates, visit the |dnload-loc|.
release running on the system must be applied, and all patches must be
committed. To find and download applicable updates, visit the |dnload-loc|.
- Transfer the new release software load to controller-0 \(or onto a USB
stick\); controller-0 must be active.

13
doc/source/updates/kubernetes/upgrading-all-in-one-simplex.rst
View File

@ -21,9 +21,16 @@ software.
an upgrade. Home directories are not preserved during backup or restore
operations, blade replacement, or upgrades.
- The system must be 'patch current'. All upgrades available for the current
release running on the system must be applied. To find and download
applicable upgrades, visit |dnload-loc| site.
- Ensure that the following conditions are met:
- The system is patch current.
- There should be sufficient free space in /opt/platform-backup. Remove
any unused files if necessary.
- The new software load has been imported.
- A valid license file has been installed.
- Transfer the new release software load to controller-0 \(or onto a USB
stick\); controller-0 must be active.