System Configuration reorg

Organized SysConf Kubernetes and OpenStack content into subdirs and modified
index along lines of Planning layout.

Signed-off-by: Stone <ronald.stone@windriver.com>
Change-Id: Ia17c015b2083a39fcae4ac545fa10cb5445b4cb2

doc/source/system_configuration/index.rst

@@ -1,3 +1,5 @@
+.. _sysconf_main_index:
+
 ====================
 System Configuration
 ====================
@@ -6,139 +8,26 @@ System Configuration
 StarlingX Kubernetes
 --------------------
 
-**************************
+|prod-long| system configuration can be done any time after installation
-System Management Overview
+to change system configuration data specified during system installation,
-**************************
+and to set additional system configuration data.
 
 .. toctree::
    :maxdepth: 2
 
-   system-configuration-management-overview
+   kubernetes/index.rst
-
-**********************
-Timezone Configuration
-**********************
-
-.. toctree::
-   :maxdepth: 2
-
-   changing-the-timezone-configuration
-
-************************
-DNS Server Configuration
-************************
-
-.. toctree::
-   :maxdepth: 2
-
-   specifying-dns-servers-using-horizon
-   specifying-dns-servers-using-the-cli
-
-
-************************
-NTP Server Configuration
-************************
-
-.. toctree::
-   :maxdepth: 2
-
-   configuring-ntp-servers-and-services-using-horizon
-   configuring-ntp-servers-and-services-using-the-cli
-   resynchronizing-a-host-to-the-ntp-server
-
-************************
-PTP Server Configuration
-************************
-
-.. toctree::
-   :maxdepth: 2
-
-   configuring-ptp-service-using-horizon
-   configuring-ptp-service-using-the-cli
-
-********************
-OAM IP Configuration
-********************
-
-.. toctree::
-   :maxdepth: 2
-
-   changing-the-oam-ip-configuration-using-horizon
-   changing-the-oam-ip-configuration-using-the-cli
-   modifying-oam-firewall-rules
-   changing-the-mtu-of-an-oam-interface-using-horizon
-   changing-the-mtu-of-an-oam-interface-using-the-cli
-
-**********************
-Application Management
-**********************
-
-.. toctree::
-   :maxdepth: 2
-
-   system-config-helm-package-manager
-   system-configuration-starlingx-application-package-manager
-   application-commands-and-helm-overrides
-
-****************************************
-Direct vs Switch-Based AIO Configuration
-****************************************
-
-.. toctree::
-   :maxdepth: 2
-
-   converting-a-duplex-system-to-direct-connection
-   converting-a-duplex-system-to-switch-based-connection
-
-**************************
-Customize Horizon Branding
-**************************
-
-.. toctree::
-   :maxdepth: 2
-
-   creating-a-custom-branding-tarball
-   applying-a-custom-branding-tarball-to-newly-installed-systems
-   applying-a-custom-branding-tarball-to-running-systems
-
-*******************************
-Customize Login Banner Branding
-*******************************
-
-.. toctree::
-   :maxdepth: 2
-
-   branding-the-login-banner-during-commissioning
-   branding-the-login-banner-on-a-commissioned-system
-
-************************
-Console Keyboard Mapping
-************************
-
-.. toctree::
-   :maxdepth: 2
-
-   console-keyboard-mapping
-
 
 -------------------
 StarlingX OpenStack
 -------------------
 
-*******************************************************
+|prod-os| is installed and managed as an Armada application.
-Configure OpenStack Services Using Helm Chart Overrides
+
-*******************************************************
+Armada Applications are a set of one or more interdependent Application Helm
+Charts. In the case of |prod|, there is generally a Helm Chart for every
+OpenStack service.
 
 .. toctree::
-   :maxdepth: 1
+   :maxdepth: 3
 
-   system-configuration-overview
+   openstack/index.rst
-   creating-optional-telemetry-services
-   configuring-a-live-migration-completion-timeout-in-nova
-   configuring-a-pci-alias-in-nova
-   configuring-the-rpc-response-timeout-in-cinder
-   enabling-the-qos-extension-for-neutron
-   enabling-the-trunk-extension-for-neutron
-   using-helm-overrides-to-enable-internal-dns
-   adding-configuration-rpc-response-max-timeout-in-neutron-conf
-   assigning-a-dedicated-vlan-id-to-a-target-project-network

doc/source/system_configuration/kubernetes/changing-the-mtu-of-an-oam-interface-using-horizon.rst

@@ -23,7 +23,7 @@ locked. This requires a swact during the procedure.
 
     #.  From the **Edit** menu for the standby controller, select **Lock Host**.
 
-        .. figure:: figures/rst1442611298701.png
+        .. figure:: ../figures/rst1442611298701.png
             :scale: 100%
 
 #.  Edit the |OAM| interface to change the |MTU| value.
@@ -42,7 +42,7 @@ locked. This requires a swact during the procedure.
 
     From the **Edit** menu for the active controller, select **Swact Host**.
 
-    .. figure:: figures/psa1420751608971.png
+    .. figure:: ../figures/psa1420751608971.png
         :scale: 100%
 
 #.  Lock the new standby controller.

doc/source/system_configuration/kubernetes/changing-the-oam-ip-configuration-using-horizon.rst

@@ -42,14 +42,14 @@ and ensure that any existing system alarms are cleared.
     The |OAM| IP page appears, showing the currently defined |OAM| network
     configuration.
 
-    .. figure:: figures/jow1413850481192.png
+    .. figure:: ../figures/jow1413850481192.png
         :scale: 100%
 
 #.  Click **Edit OAM IP**.
 
     The Edit OAM IP dialog box appears.
 
-    .. figure:: figures/jow1413850497887.png
+    .. figure:: ../figures/jow1413850497887.png
         :scale: 100%
 
 #.  Replace the IP Subnet and/or IP addresses with different ones as required.

doc/source/system_configuration/kubernetes/configuring-ntp-servers-and-services-using-horizon.rst

@@ -53,7 +53,7 @@ page and ensure that any existing system alarms are cleared.
 
     The NTP page appears, showing the currently defined |NTP| servers.
 
-    .. figure:: figures/jow1413850406811.png
+    .. figure:: ../figures/jow1413850406811.png
         :scale: 100%
 
 #.  Click **Edit NTP**.

doc/source/system_configuration/kubernetes/index.rst

@@ -0,0 +1,110 @@
+.. _sysconf_kubernetes_index:
+
+==========
+Kubernetes
+==========
+
+----------------------
+Timezone Configuration
+----------------------
+
+.. toctree::
+   :maxdepth: 2
+
+   changing-the-timezone-configuration
+
+------------------------
+DNS Server Configuration
+------------------------
+
+.. toctree::
+   :maxdepth: 2
+
+   specifying-dns-servers-using-horizon
+   specifying-dns-servers-using-the-cli
+
+
+------------------------
+NTP Server Configuration
+------------------------
+
+.. toctree::
+   :maxdepth: 2
+
+   configuring-ntp-servers-and-services-using-horizon
+   configuring-ntp-servers-and-services-using-the-cli
+   resynchronizing-a-host-to-the-ntp-server
+
+------------------------
+PTP Server Configuration
+------------------------
+
+.. toctree::
+   :maxdepth: 2
+
+   configuring-ptp-service-using-horizon
+   configuring-ptp-service-using-the-cli
+
+--------------------
+OAM IP Configuration
+--------------------
+
+.. toctree::
+   :maxdepth: 2
+
+   changing-the-oam-ip-configuration-using-horizon
+   changing-the-oam-ip-configuration-using-the-cli
+   modifying-oam-firewall-rules
+   changing-the-mtu-of-an-oam-interface-using-horizon
+   changing-the-mtu-of-an-oam-interface-using-the-cli
+
+----------------------
+Application Management
+----------------------
+
+.. toctree::
+   :maxdepth: 2
+
+   system-config-helm-package-manager
+   system-configuration-starlingx-application-package-manager
+   application-commands-and-helm-overrides
+
+----------------------------------------
+Direct vs Switch-Based AIO Configuration
+----------------------------------------
+
+.. toctree::
+   :maxdepth: 2
+
+   converting-a-duplex-system-to-direct-connection
+   converting-a-duplex-system-to-switch-based-connection
+
+--------------------------
+Customize Horizon Branding
+--------------------------
+
+.. toctree::
+   :maxdepth: 2
+
+   creating-a-custom-branding-tarball
+   applying-a-custom-branding-tarball-to-newly-installed-systems
+   applying-a-custom-branding-tarball-to-running-systems
+
+-------------------------------
+Customize Login Banner Branding
+-------------------------------
+
+.. toctree::
+   :maxdepth: 2
+
+   branding-the-login-banner-during-commissioning
+   branding-the-login-banner-on-a-commissioned-system
+
+------------------------
+Console Keyboard Mapping
+------------------------
+
+.. toctree::
+   :maxdepth: 2
+
+   console-keyboard-mapping

doc/source/system_configuration/kubernetes/specifying-dns-servers-using-horizon.rst

@@ -28,5 +28,5 @@ You can specify up to three DNS servers using the Horizon Web interface.
 #.  In the Edit DNS dialog box, add or edit the IP addresses, and then
     click **Save**.
 
-    .. figure:: figures/jow1413850386429.png
+    .. figure:: ../figures/jow1413850386429.png
         :scale: 100%

doc/source/system_configuration/openstack/index.rst

@@ -0,0 +1,23 @@
+.. _sysconf_openstack_index:
+
+===================
+StarlingX OpenStack
+===================
+
+-------------------------------------------------------
+Configure OpenStack Services Using Helm Chart Overrides
+-------------------------------------------------------
+
+.. toctree::
+   :maxdepth: 1
+
+   system-configuration-overview
+   creating-optional-telemetry-services
+   configuring-a-live-migration-completion-timeout-in-nova
+   configuring-a-pci-alias-in-nova
+   configuring-the-rpc-response-timeout-in-cinder
+   enabling-the-qos-extension-for-neutron
+   enabling-the-trunk-extension-for-neutron
+   using-helm-overrides-to-enable-internal-dns
+   adding-configuration-rpc-response-max-timeout-in-neutron-conf
+   assigning-a-dedicated-vlan-id-to-a-target-project-network

doc/source/system_configuration/system-configuration-management-overview.rst

@@ -1,14 +0,0 @@
-
-.. ewz1552673812105
-.. _system-configuration-management-overview:
-
-========================================
-System Configuration Management Overview
-========================================
-
-|prod-long| system configuration can be done any time after installation
-to change system configuration data specified during system installation,
-and to set additional system configuration data.
-
-.. xbooklink For details on accessing the system,
-   see |sec-doc|: `Access the System <configuring-local-cli-access>`