.. bmi1612787317125 .. _configuring-ethernet-interfaces-on-sriov-interface-from-horizon: =============================================================== Configure Ethernet Interfaces on SR-IOV Interface Using Horizon =============================================================== You can use the Horizon web interface to configure Ethernet interfaces on |SRIOV|. .. rubric:: |prereq| You must create an |SRIOV| interface before you can provision an Ethernet interface. For more information, see :ref:`Provisioning SR-IOV Interfaces using the CLI `. .. rubric:: |proc| #. Open the **Host Inventory** page, available from **Admin** \> **Platform** \> **Host Inventory** in the left-hand panel, under **Actions** click on the down arrow button on "Edit Host" and select "Lock Host". .. image:: /shared/figures/system_configuration/rst1442611298701.png :width: 550 #. Open the Host Detail page for the host. #. Open the Host Inventory page, available from **Admin** \> **Platform** \> **Host Inventory** in the left-hand pane. #. Select the Hosts tab, and then in the **Host Name** column, click the name of the host. #. Select the **Interfaces** tab. .. image:: /node_management/kubernetes/figures/vpw1612788524636.png #. Open the **Host Inventory** page, available from **Admin** \> **Platform** \> **Host Inventory** in the left-hand panel, under **Actions** click on the down arrow button on "Edit Host" and select "Unlock Host". #. Click **Create Interface**. #. Open the **Interface Class** drop-down menu and select **platform**. #. Open the **Interface Type** drop-down menu and select **ethernet**. #. Select the |SRIOV| Ethernet interface used to attach this interface to the network from the Interfaces\(s) list. #. From the Platform Network\(s) list, select **pxeboot** to which this interface is attached. #. Click **Create Interface** to save your changes and close the dialog box. .. image:: /node_management/kubernetes/figures/qes1612788640104.png