debian: Remove installer code used for initial integration

Remove two patches that were initially submitted to enable AIO
integration prior to the creation of the Debian kickstarts. Now that we
are utilizing the kickstart file and LAT kickstart hooks, remove the
unused code from the installer.

This change also renames patches in sequential order and cleanups up
subject lines.

Test Plan:
PASS: Install/Bootstrap/Provision AIO
PASS: Install/Bootstrap/Provision STD Controller/Worker

Change-Id: I5349a23c7fbd8b435fc9cbaffdecbafd388befa7
Story: 2009303
Task: 46189
Signed-off-by: Robert Church <robert.church@windriver.com>

ostree/initramfs-ostree/debian/patches/0002-debian-Add-CentOS-compatible-initial-AIO-partitionin.patch

@@ -1,197 +0,0 @@
-From: Robert Church <robert.church@windriver.com>
-Date: Sun, 20 Feb 2022 14:50:05 +0800
-Subject: debian: Add CentOS compatible initial AIO partitioning/formatting
-
-Add support for initial AIO partitioning and LVM formatting for AIO
-hosts.
-- Creates platform-backup partition
-- Creates default cgts-vg volume group and physical volume
-- Creates initial logical volumes for scratch-lv and log-lv
-
-Signed-off-by: Robert Church <robert.church@windriver.com>
-
-Rebase to meta-lat 20220220
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
----
- init-ostree-install.sh | 119 ++++++++++++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 117 insertions(+), 2 deletions(-)
-
-diff --git a/init-ostree-install.sh b/init-ostree-install.sh
-index 5f16ba9..2988ba2 100644
---- a/init-ostree-install.sh
-+++ b/init-ostree-install.sh
-@@ -85,7 +85,9 @@ OPTIONAL:
-  BSZ=#				- MB size of boot partition
-  RSZ=#				- MB size of root partition
-  VSZ=#				- MB size of var partition (0 for auto expand)
--
-+ StarlingX
-+ inststx=0                      - install StarlingX partitioning
-+ personality=aio                - StarlingX install personality (aio,con,wor,sto)
- EOF
- }
- 
-@@ -107,7 +109,7 @@ conflict_label() {
- 	local op=$1
- 	local 'label' 'd' 'devs' 'conflict' 'i' 'fstype'
- 	conflict=1
--	for label in otaefi otaboot otaboot_b otaroot otaroot_b fluxdata; do
-+	for label in otaefi otaboot otaboot_b otaroot otaroot_b fluxdata platform_backup platform_pv; do
- 		devs=$(blkid -t LABEL=$label -o device |grep -v $INSTDEV)
- 		if [ "$devs" != "" ] ; then
- 			i=0
-@@ -546,6 +548,8 @@ IP=""
- MAX_TIMEOUT_FOR_WAITING_LOWSPEED_DEVICE=60
- OSTREE_KERNEL_ARGS=${OSTREE_KERNEL_ARGS=%OSTREE_KERNEL_ARGS%}
- KS=""
-+INSTSTX=${INSTSTX=""}
-+PERSONALITY=${PERSONALITY=""}
- 
- if [ "$OSTREE_KERNEL_ARGS" = "%OSTREE_KERNEL_ARGS%" ] ; then
- 	OSTREE_KERNEL_ARGS="ro rootwait"
-@@ -642,6 +646,10 @@ read_args() {
- 				RSZ=$optarg ;;
- 			VSZ=*)
- 				VSZ=$optarg ;;
-+			inststx=*)
-+			    INSTSTX=$optarg ;;
-+			personality=*)
-+			    PERSONALITY=$optarg ;;
- 		esac
- 	done
- 	# defaults if not set
-@@ -654,6 +662,9 @@ read_args() {
- 	if [ "$INSTGPG" = "" ] ; then INSTGPG=1 ; fi
- 	if [ "$INSTFLUX" = "" ] ; then INSTFLUX=1 ; fi
- 	if [ "$INSTSBD" = "" ] ; then INSTSBD=2 ; fi
-+	if [ "$INSTSTX" = "" ] ; then INSTSTX=0 ; fi
-+	if [ "$PERSONALITY" = "" ] ; then PERSONALITY=aio ; fi
-+
- }
- 
- shell_start() {
-@@ -778,6 +789,40 @@ grub_partition() {
- 		fi
- 	fi
- 
-+        ############################################
-+        # StarlingX: Temp partitioning compatability
-+        if [ "$INSTSTX" = 1 ] ; then
-+            if [ "$VSZ" = 0 ] ; then
-+                # /var using up the remainder of the disk
-+                echo "WARNING WARNING - Can't allocate StarlingX partitions, /var will use the remainder of the disk"
-+            else
-+                case $PERSONALITY in
-+                    aio)
-+                        echo "Allocating StarlingX AIO host partitioning"
-+                        CGCS_PV_SIZE=183296
-+                        PLATFORM_BACKUP_SIZE=30000
-+
-+                        grub_pt_update
-+                        end=$(($first+($PLATFORM_BACKUP_SIZE*1024*1024/$lsz)-1))
-+                        a="$a -n $p:$first:$end -c $p:platform_backup"
-+                        grub_pt_update
-+                        end=$(($first+($CGCS_PV_SIZE*1024*1024/$lsz)-1))
-+                        a="$a -n $p:$first:$end -c $p:platform_pv -t $p:8E00"
-+                        ;;
-+                    con)
-+                        echo "WARNING WARNING: StarlingX standard controller host partitioning not supported"
-+                        ;;
-+                    wor)
-+                        echo "WARNING WARNING: StarlingX worker host partitioning not supported"
-+                        ;;
-+                    sto)
-+                        echo "WARNING WARNING: StarlingX storage host partitioning not supported"
-+                        ;;
-+                esac
-+            fi
-+        fi
-+        ############################################
-+
- 	sgdisk $a -p ${dev}
- }
- 
-@@ -958,6 +1003,40 @@ if [ -n "${KS}" ]; then
- 	fi
- fi
- 
-+############################################
-+# StarlingX: Clean up the volume group
-+if [ "$INSTSTX" = 1 ] ; then
-+    if [ "$VSZ" = 0 ] ; then
-+        # /var using up the remainder of the disk
-+        echo "WARNING WARNING - No volume group info to clean up, /var will use the remainder of the disk"
-+    else
-+        case $PERSONALITY in
-+            aio)
-+                echo "AIO: Clean up the volume group so that the disk can be re-partitioned"
-+                vgremove -f cgts-vg
-+
-+                # Find and wipe any existing PVs
-+                partitions=$(pvs -o pv_name --noheading | grep -v '\[unknown\]')
-+                for p in $partitions
-+                do
-+                    echo "Pre-wiping $p (pvs present)"
-+                    dd if=/dev/zero of=$p bs=512 count=34
-+                    dd if=/dev/zero of=$p bs=512 count=34 seek=$((`blockdev --getsz $p` - 34))
-+                    pvremove -f $p
-+                    wipefs -a $p
-+                done
-+                ;;
-+            con)
-+                ;;
-+            wor)
-+                ;;
-+            sto)
-+                ;;
-+        esac
-+    fi
-+fi
-+############################################
-+
- # Early curl exec
- 
- if [ "${ECURL}" != "" -a "${ECURL}" != "none" ] ; then
-@@ -1161,6 +1240,42 @@ if [ "$BL" = "grub" -a "$INSTFMT" != "0" ] ; then
- 			mkfs.ext4 -F -L fluxdata ${fs_dev}${FLUXPART}
- 		fi
- 	fi
-+        ########################################
-+        # StarlingX: Temp VG/PV/LV/FS formatting
-+        if [ "$INSTSTX" = 1 ] ; then
-+            if [ "$VSZ" = 0 ] ; then
-+                echo "WARNING WARNING - Skipping StarlingX default LVM storage, /var will use the remainder of the disk"
-+            else
-+                case $PERSONALITY in
-+                    aio)
-+                        echo "Creating StarlingX AIO host default LVM storage"
-+                        LOG_VOL_SIZE=8000
-+                        SCRATCH_VOL_SIZE=16000
-+
-+                        pi=$((pi+1))
-+                        mkfs.ext4 -F -L platform_backup ${fs_dev}${pi}
-+
-+                        pi=$((pi+1))
-+                        vgcreate --yes --force cgts-vg ${fs_dev}${pi}
-+                        lvcreate --yes -n log-lv --size "${LOG_VOL_SIZE}MB" cgts-vg
-+                        mkfs.ext4 -F /dev/cgts-vg/log-lv
-+                        lvcreate -n scratch-lv --size "${SCRATCH_VOL_SIZE}MB" cgts-vg
-+                        mkfs.ext4 -F /dev/cgts-vg/scratch-lv
-+
-+                        ;;
-+                    con)
-+                        echo "WARNING WARNING: StarlingX standard controller host default LVM storage not supported"
-+                        ;;
-+                    wor)
-+                        echo "WARNING WARNING: StarlingX worker host default LVM storage not supported"
-+                        ;;
-+                    sto)
-+                        echo "WARNING WARNING: StarlingX storage host default LVM storage not supported"
-+                        ;;
-+                esac
-+            fi
-+        fi
-+        ########################################
- elif [ "$INSTFMT" != 0 ] ; then
- 	if [ $INSTSF = 1 ] ; then
- 		dosfslabel ${fs_dev}${p1} boot

ostree/initramfs-ostree/debian/patches/0002-debian-Copy-sysroot-var-log-to-LVM-volume.patch

@@ -1,6 +1,6 @@
 From: Charles Short <charles.short@windriver.com>
 Date: Thu, 17 Feb 2022 15:21:03 -0500
-Subject: [PATCH 3/3] debian: Copy /sysroot/var/log to LVM volume
+Subject: debian: Copy /sysroot/var/log to LVM volume
 
 Sync the contents of ostree/1/var/log and the
 cgts-vg/log-lv volume so services will start properly
@@ -12,10 +12,10 @@ Signed-off-by: Charles Short <charles.short@windriver.com>
  1 file changed, 9 insertions(+)
 
 diff --git a/init-ostree-install.sh b/init-ostree-install.sh
-index 2988ba2..a2ccf10 100644
+index 0e5b8f3..1a53f3c 100644
 --- a/init-ostree-install.sh
 +++ b/init-ostree-install.sh
-@@ -1528,6 +1528,15 @@ if [ -d ${PHYS_SYSROOT}/ostree/1/usr/homedirs/home ] ; then
+@@ -1486,6 +1486,15 @@ if [ -d ${PHYS_SYSROOT}/ostree/1/usr/homedirs/home ] ; then
  	tar --xattrs --xattrs-include='*' -xf - -C /var1/home 2> /dev/null
  fi
  

ostree/initramfs-ostree/debian/patches/0003-Make-boot-efi-mount-as-rw.patch

@@ -8,10 +8,10 @@ Signed-off-by: Jim Somerville <jim.somerville@windriver.com>
  1 file changed, 6 insertions(+)
 
 diff --git a/init-ostree-install.sh b/init-ostree-install.sh
-index cc7a507..e11289a 100644
+index 1a53f3c..7f7f925 100644
 --- a/init-ostree-install.sh
 +++ b/init-ostree-install.sh
-@@ -1589,6 +1589,12 @@ if [ -d /sys/firmware/efi/efivars ] ;then
+@@ -1549,6 +1549,12 @@ if [ -d /sys/firmware/efi/efivars ] ;then
      fi
  fi
  

ostree/initramfs-ostree/debian/patches/0004-Wipe-signatures-and-zero-first-4KiB.patch

@@ -1,33 +0,0 @@
-From: Robert Church <robert.church@windriver.com>
-Date: Sat, 26 Feb 2022 22:08:52 -0500
-Subject: Wipe signatures and zero first 4KiB
-
-To avoid any previous ext4 file system signatures that could have been
-present from previous installs, add lvcreate options to wipe signatures
-and zero the first 4KiB of data in the LV. This will avoid requiring
-user interaction.
-
- WARNING: ext4 signature detected on /dev/cgts-vg/scratch-lv at offset
- 1080. Wipe it? [y/n]:
-
-Signed-off-by: Robert Church <robert.church@windriver.com>
----
- init-ostree-install.sh | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/init-ostree-install.sh b/init-ostree-install.sh
-index a2ccf10..cc7a507 100644
---- a/init-ostree-install.sh
-+++ b/init-ostree-install.sh
-@@ -1257,9 +1257,9 @@ if [ "$BL" = "grub" -a "$INSTFMT" != "0" ] ; then
- 
-                         pi=$((pi+1))
-                         vgcreate --yes --force cgts-vg ${fs_dev}${pi}
--                        lvcreate --yes -n log-lv --size "${LOG_VOL_SIZE}MB" cgts-vg
-+                        lvcreate -y -Wy -Zy -n log-lv --size "${LOG_VOL_SIZE}MB" cgts-vg
-                         mkfs.ext4 -F /dev/cgts-vg/log-lv
--                        lvcreate -n scratch-lv --size "${SCRATCH_VOL_SIZE}MB" cgts-vg
-+                        lvcreate -y -Wy -Zy -n scratch-lv --size "${SCRATCH_VOL_SIZE}MB" cgts-vg
-                         mkfs.ext4 -F /dev/cgts-vg/scratch-lv
- 
-                         ;;

ostree/initramfs-ostree/debian/patches/0004-debian-set-default-size-variables-in-install-script.patch

@@ -1,7 +1,9 @@
-From 52ad1b5821b76b26db2933338a46f478fadb3fcb Mon Sep 17 00:00:00 2001
 From: Hongxu Jia <hongxu.jia@windriver.com>
 Date: Tue, 1 Mar 2022 14:28:01 +0800
-Subject: [PATCH 5/5] debian: set default size variables in install script
+Subject: debian: set default size variables in install script
+MIME-Version: 1.0
+Content-Type: text/plain; charset="utf-8"
+Content-Transfer-Encoding: 8bit
 
 If don’t specify the size variables (FSZ BSZ RSZ VSZ) on the
 grub command line nor the --inst-flux option in the lat-disk command.
@@ -14,10 +16,10 @@ Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
  1 file changed, 3 insertions(+), 3 deletions(-)
 
 diff --git a/init-ostree-install.sh b/init-ostree-install.sh
-index 56f01c0..42091d4 100644
+index 7f7f925..a302abc 100644
 --- a/init-ostree-install.sh
 +++ b/init-ostree-install.sh
-@@ -509,9 +509,9 @@ fatal() {
+@@ -528,9 +528,9 @@ fatal() {
  # default values must match ostree-settings.inc
  BLM=2506
  FSZ=32
@@ -30,6 +32,3 @@ index 56f01c0..42091d4 100644
  # end values from ostree-settings.inc
  LUKS=0
  BIOSPLUSEFI=0
--- 
-2.25.1
-

ostree/initramfs-ostree/debian/patches/0005-Wait-for-devices-to-be-configured-after-boot.patch

@@ -1,7 +1,6 @@
-From 97ae81f83a1e98b84aeaf6cfc64f79ac9ea99315 Mon Sep 17 00:00:00 2001
 From: Dan Voiculeasa <dan.voiculeasa@windriver.com>
 Date: Tue, 19 Jul 2022 10:32:46 +0300
-Subject: [PATCH] Wait for devices to be configured after boot
+Subject: Wait for devices to be configured after boot
 
 It was observed that dhcp requests happen too soon after boot.
 It may happen that the NIC driver won't rename the interface
@@ -17,10 +16,10 @@ Signed-off-by: Dan Voiculeasa <dan.voiculeasa@windriver.com>
  1 file changed, 3 insertions(+), 1 deletion(-)
 
 diff --git a/init-ostree-install.sh b/init-ostree-install.sh
-index 9bfcd2a..5442391 100644
+index a302abc..4dc3079 100644
 --- a/init-ostree-install.sh
 +++ b/init-ostree-install.sh
-@@ -965,7 +965,9 @@ if [ "$INSTSH" = 1 -o "$INSTSH" = 3 -o "$INSTSH" = 4 ] ; then
+@@ -920,7 +920,9 @@ if [ "$INSTSH" = 1 -o "$INSTSH" = 3 -o "$INSTSH" = 4 ] ; then
  	lreboot
  fi
  
@@ -31,6 +30,3 @@ index 9bfcd2a..5442391 100644
  
  if [ "$INSTNAME" = "" ] ; then
  	fatal "Error no remote archive name, need kernel argument: instname=..."
--- 
-2.34.1
-

ostree/initramfs-ostree/debian/patches/0006-init-ostree-install.sh-break-hardlinks-in-var.patch

@@ -1,7 +1,6 @@
-From c4eaf35440afe4ef0473b90b32566a05f99dfbd6 Mon Sep 17 00:00:00 2001
 From: Zhang Xiao <xiao.zhang@windriver.com>
 Date: Sat, 6 Aug 2022 12:39:16 +0000
-Subject: [PATCH] init-ostree-install.sh: break hardlinks in /var
+Subject: init-ostree-install.sh: break hardlinks in /var
 
 Here the root filesystem is managed by OSTree. OSTree is designed to
 manage/deploy read-only filesystem. For read-only filesystem, hardlink
@@ -21,10 +20,10 @@ Signed-off-by: Zhang Xiao <xiao.zhang@windriver.com>
  1 file changed, 2 insertions(+), 2 deletions(-)
 
 diff --git a/init-ostree-install.sh b/init-ostree-install.sh
-index 0e5b8f3..f66224d 100644
+index 4dc3079..41bae2a 100644
 --- a/init-ostree-install.sh
 +++ b/init-ostree-install.sh
-@@ -1478,11 +1478,11 @@ else
+@@ -1480,11 +1480,11 @@ else
  	mount -o $mount_flags LABEL=fluxdata /var1
  fi
  if [ -d ${PHYS_SYSROOT}/ostree/1/var ] ; then
@@ -38,6 +37,3 @@ index 0e5b8f3..f66224d 100644
  	tar --xattrs --xattrs-include='*' -xf - -C /var1/home 2> /dev/null
  fi
  
--- 
-2.32.0
-

ostree/initramfs-ostree/debian/patches/series

@@ -1,8 +1,6 @@
 0001-Prevent-auto-expansion-of-fluxdata-partition.patch
-0002-debian-Add-CentOS-compatible-initial-AIO-partitionin.patch
+0002-debian-Copy-sysroot-var-log-to-LVM-volume.patch
-0003-debian-Copy-sysroot-var-log-to-LVM-volume.patch
+0003-Make-boot-efi-mount-as-rw.patch
-0004-Wipe-signatures-and-zero-first-4KiB.patch
+0004-debian-set-default-size-variables-in-install-script.patch
-0005-Make-boot-efi-mount-as-rw.patch
+0005-Wait-for-devices-to-be-configured-after-boot.patch
-0006-debian-set-default-size-variables-in-install-script.patch
+0006-init-ostree-install.sh-break-hardlinks-in-var.patch
-0007-Wait-for-devices-to-be-configured-after-boot.patch
-0008-init-ostree-install.sh-break-hardlink-in-var.patch