starlingx/integ
Code Issues Proposed changes
integ/base/linuxptp/debian/patches/0035-clock-Add-read-only-UDS-port-for-monitoring.patch
Andre Mauricio Zelak 06c396fbe3 Fix HA clock selection algorithm 
The issue reported is a particular case of a BC configured with
redundant PTP clocks with same priority. When a clock recovers
from a failure, as both clock were configured with same priority
it's expected the active clock source to remain active. But if
the recovered clock presented a better local clock class than
active, it was being selected active. This specific case was fixed.

Closes-bug: 2084723

Test plan: BC with same priority
PASS: Start the PTP service with all clocks out of requirements,
one is selected, no matter which one.
PASS: Then, when the backup clock recovers from failure it is
selected active.
PASS: Then, when the other clock recovers from failure it remains
as backup, no matter the local clock class.
PASS: Then, when the active goes out of requirement, the backup
is set active.

Test plan: GM with same priority
PASS: Start the PTP service with all clocks out of requirements,
one is selected, no matter which one.
PASS: Then, when the backup clock recovers from failure it is selected
active.
PASS: Then, when the other clock recovers from failure it remains
as backup, no matter the local clock class.
PASS: Then, when the active goes out of requirement, the backup
is set active.

Change-Id: Id2568bc8bbaad4cbf15070314f7904d3c3bbd53d
Signed-off-by: Andre Mauricio Zelak <andre.zelak@windriver.com>
2024-10-16 18:19:55 -03:00

289 lines
9.5 KiB
Diff
Raw Blame History

From: Andre Mauricio Zelak <andre.zelak@windriver.com>
Date: Mon, 12 Jun 2023 18:18:29 -0300
Subject: [PATCH 35/61] clock: Add read-only UDS port for monitoring.
Add a second UDS port to allow untrusted applications to monitor ptp4l.
On this "read-only" UDS port disable non-GET actions and forwarding.
The path can be configured with the uds_ro_address option (default is
/var/run/ptp4lro).
Forwarding is disabled to limit the access to the local ptp4l instance.
Subscriptions are not enabled to prevent the applications from making a
large number of subscriptions or interfere with applications that have
access to the read-write UDS port.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
[commit 6823e077b2466dcc3c7cbce8ab384b0ef9a62811 upstream]
Signed-off-by: Andre Mauricio Zelak <andre.zelak@windriver.com>
---
clock.c | 72 +++++++++++++++++++++++++++++++++++++++++++----------
config.c | 1 +
configs/default.cfg | 1 +
ptp4l.8 | 6 +++++
4 files changed, 67 insertions(+), 13 deletions(-)
diff --git a/clock.c b/clock.c
index d653c33..869e35d 100644
--- a/clock.c
+++ b/clock.c
@@ -96,9 +96,10 @@ struct clock {
struct ClockIdentity best_id;
LIST_HEAD(ports_head, port) ports;
struct port *uds_rw_port;
+ struct port *uds_ro_port;
struct pollfd *pollfd;
int pollfd_valid;
- int nports; /* does not include the UDS port */
+ int nports; /* does not include the two UDS ports */
int last_port_number;
int sde;
int free_running;
@@ -130,6 +131,7 @@ struct clock {
int stats_interval;
struct clockcheck *sanity_check;
struct interface *uds_rw_if;
+ struct interface *uds_ro_if;
LIST_HEAD(clock_subscribers_head, clock_subscriber) subscribers;
struct monitor *slave_event_monitor;
};
@@ -266,12 +268,14 @@ void clock_destroy(struct clock *c)
struct port *p, *tmp;
interface_destroy(c->uds_rw_if);
+ interface_destroy(c->uds_ro_if);
clock_flush_subscriptions(c);
LIST_FOREACH_SAFE(p, &c->ports, list, tmp) {
clock_remove_port(c, p);
}
monitor_destroy(c->slave_event_monitor);
port_close(c->uds_rw_port);
+ port_close(c->uds_ro_port);
free(c->pollfd);
if (c->clkid != CLOCK_REALTIME) {
phc_close(c->clkid);
@@ -441,7 +445,7 @@ static int clock_management_fill_response(struct clock *c, struct port *p,
break;
case TLV_SUBSCRIBE_EVENTS_NP:
if (p != c->uds_rw_port) {
- /* Only the UDS port allowed. */
+ /* Only the UDS-RW port allowed. */
break;
}
sen = (struct subscribe_events_np *)tlv->data;
@@ -772,6 +776,10 @@ static int clock_utc_correct(struct clock *c, tmv_t ingress)
static int forwarding(struct clock *c, struct port *p)
{
enum port_state ps = port_state(p);
+
+ if (p == c->uds_ro_port)
+ return 0;
+
switch (ps) {
case PS_MASTER:
case PS_GRAND_MASTER:
@@ -816,7 +824,7 @@ static int clock_add_port(struct clock *c, const char *phc_device,
{
struct port *p, *piter, *lastp = NULL;
- if (clock_resize_pollfd(c, c->nports + 1)) {
+ if (clock_resize_pollfd(c, c->nports + 2)) {
return -1;
}
p = port_open(phc_device, phc_index, timestamping,
@@ -1041,6 +1049,7 @@ struct clock *clock_create(enum clock_type type, struct config *config,
}
/* Configure the UDS. */
+
uds_ifname = config_get_string(config, NULL, "uds_address");
c->uds_rw_if = interface_create(uds_ifname);
if (config_set_section_int(config, interface_name(c->uds_rw_if),
@@ -1060,6 +1069,25 @@ struct clock *clock_create(enum clock_type type, struct config *config,
return NULL;
}
+ uds_ifname = config_get_string(config, NULL, "uds_ro_address");
+ c->uds_ro_if = interface_create(uds_ifname);
+ if (config_set_section_int(config, interface_name(c->uds_ro_if),
+ "announceReceiptTimeout", 0)) {
+ return NULL;
+ }
+ if (config_set_section_int(config, interface_name(c->uds_ro_if),
+ "delay_mechanism", DM_AUTO)) {
+ return NULL;
+ }
+ if (config_set_section_int(config, interface_name(c->uds_ro_if),
+ "network_transport", TRANS_UDS)) {
+ return NULL;
+ }
+ if (config_set_section_int(config, interface_name(c->uds_ro_if),
+ "delay_filter_length", 1)) {
+ return NULL;
+ }
+
c->config = config;
c->free_running = config_get_int(config, NULL, "free_running");
c->freq_est_interval = config_get_int(config, NULL, "freq_est_interval");
@@ -1177,11 +1205,18 @@ struct clock *clock_create(enum clock_type type, struct config *config,
return NULL;
}
- /* Create the UDS interface. */
+ /* Create the UDS interfaces. */
+
c->uds_rw_port = port_open(phc_device, phc_index, timestamping, 0,
c->uds_rw_if, c);
if (!c->uds_rw_port) {
- pr_err("failed to open the UDS port");
+ pr_err("failed to open the UDS-RW port");
+ return NULL;
+ }
+ c->uds_ro_port = port_open(phc_device, phc_index, timestamping, 0,
+ c->uds_ro_if, c);
+ if (!c->uds_ro_port) {
+ pr_err("failed to open the UDS-RO port");
return NULL;
}
clock_fda_changed(c);
@@ -1206,6 +1241,7 @@ struct clock *clock_create(enum clock_type type, struct config *config,
port_dispatch(p, EV_INITIALIZE, 0);
}
port_dispatch(c->uds_rw_port, EV_INITIALIZE, 0);
+ port_dispatch(c->uds_ro_port, EV_INITIALIZE, 0);
return c;
}
@@ -1276,9 +1312,9 @@ static int clock_resize_pollfd(struct clock *c, int new_nports)
{
struct pollfd *new_pollfd;
- /* Need to allocate one whole extra block of fds for UDS. */
+ /* Need to allocate two whole extra blocks of fds for UDS ports. */
new_pollfd = realloc(c->pollfd,
- (new_nports + 1) * N_CLOCK_PFD *
+ (new_nports + 2) * N_CLOCK_PFD *
sizeof(struct pollfd));
if (!new_pollfd) {
return -1;
@@ -1314,6 +1350,8 @@ static void clock_check_pollfd(struct clock *c)
dest += N_CLOCK_PFD;
}
clock_fill_pollfd(dest, c->uds_rw_port);
+ dest += N_CLOCK_PFD;
+ clock_fill_pollfd(dest, c->uds_ro_port);
c->pollfd_valid = 1;
}
@@ -1329,7 +1367,8 @@ static int clock_do_forward_mgmt(struct clock *c,
if (in == out || !forwarding(c, out))
return 0;
- /* Don't forward any requests to the UDS port. */
+ /* Don't forward any requests to the UDS-RW port
+ (the UDS-RO port doesn't allow any forwarding). */
if (out == c->uds_rw_port) {
switch (management_action(msg)) {
case GET:
@@ -1414,7 +1453,7 @@ int clock_manage(struct clock *c, struct port *p, struct ptp_message *msg)
return changed;
}
if (p != c->uds_rw_port) {
- /* Sorry, only allowed on the UDS port. */
+ /* Sorry, only allowed on the UDS-RW port. */
clock_management_send_error(p, msg, TLV_NOT_SUPPORTED);
return changed;
}
@@ -1423,7 +1462,7 @@ int clock_manage(struct clock *c, struct port *p, struct ptp_message *msg)
break;
case COMMAND:
if (p != c->uds_rw_port) {
- /* Sorry, only allowed on the UDS port. */
+ /* Sorry, only allowed on the UDS-RW port. */
clock_management_send_error(p, msg, TLV_NOT_SUPPORTED);
return changed;
}
@@ -1435,7 +1474,7 @@ int clock_manage(struct clock *c, struct port *p, struct ptp_message *msg)
switch (mgt->id) {
case TLV_PORT_PROPERTIES_NP:
if (p != c->uds_rw_port) {
- /* Only the UDS port allowed. */
+ /* Only the UDS-RW port allowed. */
clock_management_send_error(p, msg, TLV_NOT_SUPPORTED);
return 0;
}
@@ -1548,7 +1587,7 @@ int clock_poll(struct clock *c)
struct port *p;
clock_check_pollfd(c);
- cnt = poll(c->pollfd, (c->nports + 1) * N_CLOCK_PFD, -1);
+ cnt = poll(c->pollfd, (c->nports + 2) * N_CLOCK_PFD, -1);
if (cnt < 0) {
if (EINTR == errno) {
return 0;
@@ -1602,7 +1641,7 @@ int clock_poll(struct clock *c)
cur += N_CLOCK_PFD;
}
- /* Check the UDS port. */
+ /* Check the UDS ports. */
for (i = 0; i < N_POLLFD; i++) {
if (cur[i].revents & (POLLIN|POLLPRI)) {
event = port_event(c->uds_rw_port, i);
@@ -1611,6 +1650,13 @@ int clock_poll(struct clock *c)
}
}
}
+ cur += N_CLOCK_PFD;
+ for (i = 0; i < N_POLLFD; i++) {
+ if (cur[i].revents & (POLLIN|POLLPRI)) {
+ event = port_event(c->uds_ro_port, i);
+ /* sde is not expected on the UDS-RO port */
+ }
+ }
if (c->sde) {
handle_state_decision_event(c);
diff --git a/config.c b/config.c
index fea7f67..d45e948 100644
--- a/config.c
+++ b/config.c
@@ -323,6 +323,7 @@ struct config_item config_tab[] = {
PORT_ITEM_INT("udp_ttl", 1, 1, 255),
PORT_ITEM_INT("udp6_scope", 0x0E, 0x00, 0x0F),
GLOB_ITEM_STR("uds_address", "/var/run/ptp4l"),
+ GLOB_ITEM_STR("uds_ro_address", "/var/run/ptp4lro"),
PORT_ITEM_INT("unicast_listen", 0, 0, 1),
PORT_ITEM_INT("unicast_master_table", 0, 0, INT_MAX),
PORT_ITEM_INT("unicast_req_duration", 3600, 10, INT_MAX),
diff --git a/configs/default.cfg b/configs/default.cfg
index 8c19129..d5bab7d 100644
--- a/configs/default.cfg
+++ b/configs/default.cfg
@@ -90,6 +90,7 @@ p2p_dst_mac 01:80:C2:00:00:0E
udp_ttl 1
udp6_scope 0x0E
uds_address /var/run/ptp4l
+uds_ro_address /var/run/ptp4lro
#
# Default interface options
#
diff --git a/ptp4l.8 b/ptp4l.8
index b179b81..f9bd228 100644
--- a/ptp4l.8
+++ b/ptp4l.8
@@ -615,6 +615,12 @@ is only relevant with IPv6 transport. See RFC 4291. The default is
Specifies the address of the UNIX domain socket for receiving local
management messages. The default is /var/run/ptp4l.
.TP
+.B uds_ro_address
+Specifies the address of the second UNIX domain socket for receiving local
+management messages, which is restricted to GET actions and does not forward
+messages to other ports. Access to this socket can be given to untrusted
+applications for monitoring purposes. The default is /var/run/ptp4lro.
+.TP
.B dscp_event
Defines the Differentiated Services Codepoint (DSCP) to be used for PTP
event messages. Must be a value between 0 and 63. There are several media
View Git Blame Copy Permalink