starlingx/metal
Code Issues Proposed changes

Align partitions created by kickstarters

Browse Source 
Partitions on some disks may be created unaligned.

The cause is that the creation of partitions is done between
specific intervals expressed in MBs. The kernel exposed a
specific variable for each disk for providing an offset to
align each partitions (/sys/block/<disk>/alignment_offset).

For better granular control, we transform MB units into
logical sector units and use the alignment_offset variable
to properly align the partitions.

Change-Id: I971c232fe0969eac14b85c5796908f0c85e23dbf
Closes-bug: 1883975
Signed-off-by: Daniel Safta <daniel.safta@windriver.com>
This commit is contained in:
Daniel Safta 2020-08-27 11:15:17 +00:00
parent 08c8c65795
commit 0e89acc83c
2 changed files with 144 additions and 54 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

99
bsp-files/kickstarts/pre_disk_aio.cfg
View File

@ -104,6 +104,8 @@ SCRATCH_VOL_SIZE=16000
PLATFORM_BACKUP_SIZE=10000 PLATFORM_BACKUP_SIZE=10000
BOOT_SIZE=500 BOOT_SIZE=500
EFI_SIZE=300 EFI_SIZE=300
ONE_MiB=$(( 1024 * 1024 ))
ONE_TENTH_MiB_IN_SECTORS=200
ROOTFS_OPTIONS="defaults" ROOTFS_OPTIONS="defaults"
profile_mode=`cat /proc/cmdline |xargs -n1 echo |grep security_profile= | grep extended` profile_mode=`cat /proc/cmdline |xargs -n1 echo |grep security_profile= | grep extended`
@ -112,22 +114,50 @@ if [ -n "$profile_mode" ]; then
ROOTFS_OPTIONS="${ROOTFS_OPTIONS},iversion" ROOTFS_OPTIONS="${ROOTFS_OPTIONS},iversion"
fi fi
BLOCK_DEVICE=$(echo $rootfs_device |awk -F/ '{ print $3 }')
optimal_io_size=$(cat /sys/block/$BLOCK_DEVICE/queue/optimal_io_size)
logical_block_size=$(cat /sys/block/$BLOCK_DEVICE/queue/logical_block_size)
alignment_offset=$(cat /sys/block/$BLOCK_DEVICE/alignment_offset)
if [ -z ${optimal_io_size} ] || [ $optimal_io_size -le 0 ]; then
optimal_io_size=$ONE_MiB
wlog "Error finding optimal_io_size. Using the default ${ONE_MiB} value"
fi
if [ -z ${logical_block_size} ] || [ $logical_block_size -le 0 ]; then
logical_block_size=512
wlog "Error finding logical_block_size. Using the default 512 value"
fi
if [ -z ${alignment_offset} ]; then
alignment_offset=0
wlog "Error finding alignment_offset. Using the default 0 value"
fi
wlog "Optimal IO size: ${optimal_io_size}, logical block size: ${logical_block_size}, alignment offset: ${alignment_offset}."
START_POINT=$(( ($optimal_io_size + $alignment_offset)/$logical_block_size ))
if [ -d /sys/firmware/efi ] ; then if [ -d /sys/firmware/efi ] ; then
BACKUP_PART=${ROOTFS_PART_PREFIX}1 BACKUP_PART=${ROOTFS_PART_PREFIX}1
BACKUP_PART_NO=1 BACKUP_PART_NO=1
START_POINT=1 START_POINT=1
END_POINT=$(($START_POINT + $PLATFORM_BACKUP_SIZE)) SIZE_SEC=$(( ($PLATFORM_BACKUP_SIZE * $ONE_MiB )/$logical_block_size ))
END_POINT=$(( $START_POINT + $SIZE_SEC - 1 ))
BACKUP_END_POINT=$END_POINT BACKUP_END_POINT=$END_POINT
if [ $BACKUP_CREATED -eq 0 ] ; then if [ $BACKUP_CREATED -eq 0 ] ; then
wlog "Creating platform backup partition of ${PLATFORM_BACKUP_SIZE}MiB from ${START_POINT}MiB to ${END_POINT}MiB." wlog "Creating platform backup partition of ${PLATFORM_BACKUP_SIZE}MiB from ${START_POINT}s to ${END_POINT}s."
exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary ext4 ${START_POINT}MiB ${END_POINT}MiB" exec_retry 5 0.5 "parted $rootfs_device mkpart primary ext4 ${START_POINT}s ${END_POINT}s"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!" [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
fi fi
START_POINT=$END_POINT START_POINT=$(( $END_POINT + 1 ))
END_POINT=$(($START_POINT + $EFI_SIZE)) SIZE_SEC=$(( ($EFI_SIZE * $ONE_MiB )/$logical_block_size ))
wlog "Creating EFI partition of ${EFI_SIZE}MiB from ${START_POINT}MiB to ${END_POINT}MiB." END_POINT=$(( $START_POINT + $SIZE_SEC - 1))
exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary fat32 ${START_POINT}MiB ${END_POINT}MiB"
wlog "Creating EFI partition of ${EFI_SIZE}MiB from ${START_POINT}s to ${END_POINT}s."
exec_retry 5 0.5 "parted $rootfs_device mkpart primary fat32 ${START_POINT}s ${END_POINT}s"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!" [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
cat<<EOF>>/tmp/part-include cat<<EOF>>/tmp/part-include
@ -137,15 +167,29 @@ else
BACKUP_PART=${ROOTFS_PART_PREFIX}2 BACKUP_PART=${ROOTFS_PART_PREFIX}2
BACKUP_PART_NO=2 BACKUP_PART_NO=2
wlog "Creating 1MB BIOS GRUB partition from 1MiB to 2MiB." wlog "Creating 1MB BIOS GRUB partition from 1MiB to 2MiB."
exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary 1MiB 2MiB" # Although we calculate proper sector between which to create the bios
# partition, we still create it between 1MiB and 2MiB to take into account
# upgrade scenarios.
# If upgrading from version N to N+1, version N might have non-aligned bios
# partition, but right after it will be the platform backup partition. If
# the alignment is bad, then if we try to align the bios partition by
# shifting it right, we may come over the backup partition, that is not
# deleted by kickstarters.
# Since the bios partition is only used for booting, it not being aligned
# shouldn't cause any issues.
exec_retry 5 0.5 "parted $rootfs_device mkpart primary 1MiB 2MiB"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!" [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
START_POINT=2 SIZE_SEC=$(( ( $ONE_MiB )/$logical_block_size ))
END_POINT=$(($START_POINT + $PLATFORM_BACKUP_SIZE)) END_POINT=$(( $START_POINT + $SIZE_SEC - 1 ))
START_POINT=$(( $END_POINT + 1 ))
SIZE_SEC=$(( ($PLATFORM_BACKUP_SIZE * $ONE_MiB )/$logical_block_size ))
END_POINT=$(( $START_POINT + $SIZE_SEC - 1 ))
BACKUP_END_POINT=$END_POINT BACKUP_END_POINT=$END_POINT
if [ $BACKUP_CREATED -eq 0 ] ; then if [ $BACKUP_CREATED -eq 0 ] ; then
wlog "Creating platform backup partition of ${PLATFORM_BACKUP_SIZE}MiB from ${START_POINT}MiB to ${END_POINT}MiB." wlog "Creating platform backup partition of ${PLATFORM_BACKUP_SIZE}MiB from ${START_POINT}s to ${END_POINT}s."
exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary ext4 ${START_POINT}MiB ${END_POINT}MiB" exec_retry 5 0.5 "parted $rootfs_device mkpart primary ext4 ${START_POINT}s ${END_POINT}s"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!" [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
fi fi
cat<<EOF>>/tmp/part-include cat<<EOF>>/tmp/part-include
@ -153,22 +197,25 @@ part biosboot --asprimary --fstype=biosboot --onpart=${ROOTFS_PART_PREFIX}1
EOF EOF
fi fi
START_POINT=$END_POINT START_POINT=$(( $END_POINT + 1 ))
END_POINT=$(($START_POINT + $BOOT_SIZE)) SIZE_SEC=$(( ($BOOT_SIZE * $ONE_MiB )/$logical_block_size ))
wlog "Creating boot partition of ${BOOT_SIZE}MiB from ${START_POINT}MiB to ${END_POINT}MiB." END_POINT=$(( $START_POINT + $SIZE_SEC - 1 ))
exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary ext4 ${START_POINT}MiB ${END_POINT}MiB" wlog "Creating boot partition of ${BOOT_SIZE}MiB from ${START_POINT}s to ${END_POINT}s."
exec_retry 5 0.5 "parted $rootfs_device mkpart primary ext4 ${START_POINT}s ${END_POINT}s"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!" [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
START_POINT=$END_POINT START_POINT=$(( $END_POINT + 1 ))
END_POINT=$(($START_POINT + $ROOTFS_SIZE)) SIZE_SEC=$(( ($ROOTFS_SIZE * $ONE_MiB )/$logical_block_size ))
wlog "Creating rootfs partition of ${ROOTFS_SIZE}MiB from ${START_POINT}MiB to ${END_POINT}MiB." END_POINT=$(( $START_POINT + $SIZE_SEC - 1 ))
exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary ext4 ${START_POINT}MiB ${END_POINT}MiB" wlog "Creating rootfs partition of ${ROOTFS_SIZE}MiB from ${START_POINT}s to ${END_POINT}s."
exec_retry 5 0.5 "parted $rootfs_device mkpart primary ext4 ${START_POINT}s ${END_POINT}s"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!" [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
START_POINT=$END_POINT START_POINT=$(( $END_POINT + 1 ))
END_POINT=$(($START_POINT + $CGCS_PV_SIZE)) SIZE_SEC=$(( ($CGCS_PV_SIZE * $ONE_MiB )/$logical_block_size ))
wlog "Creating cgcs-vg partition of ${CGCS_PV_SIZE}MiB from ${START_POINT}MiB to ${END_POINT}MiB." END_POINT=$(( $START_POINT + $SIZE_SEC - 1 ))
exec_retry 5 0.5 "parted -s $rootfs_device mkpart extended ${START_POINT}MiB ${END_POINT}MiB" wlog "Creating cgcs-vg partition of ${CGCS_PV_SIZE}MiB from ${START_POINT}s to ${END_POINT}s."
exec_retry 5 0.5 "parted $rootfs_device mkpart extended ${START_POINT}s ${END_POINT}s"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!" [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
if [ $BACKUP_CREATED -ne 0 ] ; then if [ $BACKUP_CREATED -ne 0 ] ; then
@ -176,8 +223,8 @@ if [ $BACKUP_CREATED -ne 0 ] ; then
if [ $BACKUP_CURRENT_SIZE -lt $PLATFORM_BACKUP_SIZE ] ; then if [ $BACKUP_CURRENT_SIZE -lt $PLATFORM_BACKUP_SIZE ] ; then
wlog "Backup partition size is ${BACKUP_CURRENT_SIZE}MiB, resizing to ${PLATFORM_BACKUP_SIZE}MiB." wlog "Backup partition size is ${BACKUP_CURRENT_SIZE}MiB, resizing to ${PLATFORM_BACKUP_SIZE}MiB."
# parted will throw an error about overlapping with the next partition if we don't do this # parted will throw an error about overlapping with the next partition if we don't do this
BACKUP_END_POINT=$(($BACKUP_END_POINT - 1)).9 BACKUP_END_POINT=$(( $BACKUP_END_POINT - $ONE_TENTH_MiB_IN_SECTORS ))
exec_retry 5 0.5 "parted -s $rootfs_device resizepart $BACKUP_PART_NO ${BACKUP_END_POINT}MiB" exec_retry 5 0.5 "parted $rootfs_device resizepart $BACKUP_PART_NO ${BACKUP_END_POINT}s"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: resize of platform backup partition failed!" [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: resize of platform backup partition failed!"
exec_retry 2 0.1 "e2fsck -p -f $BACKUP_PART" exec_retry 2 0.1 "e2fsck -p -f $BACKUP_PART"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: e2fsck failed on platform backup partition!" [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: e2fsck failed on platform backup partition!"

99
bsp-files/kickstarts/pre_disk_controller.cfg
View File

@ -1,37 +1,62 @@
## NOTE: updates to partition sizes need to be also reflected in ## NOTE: updates to partition sizes need to be also reflected in
## _controller_filesystem_limits() in sysinv/api/controllers/v1/istorconfig.py ## _controller_filesystem_limits() in sysinv/api/controllers/v1/istorconfig.py
ROOTFS_SIZE=20000 ROOTFS_SIZE=20000
LOG_VOL_SIZE=8000 LOG_VOL_SIZE=8000
SCRATCH_VOL_SIZE=16000 SCRATCH_VOL_SIZE=16000
PLATFORM_BACKUP_SIZE=10000 PLATFORM_BACKUP_SIZE=10000
BOOT_SIZE=500 BOOT_SIZE=500
EFI_SIZE=300 EFI_SIZE=300
ONE_MiB=$((1024 * 1024))
ONE_TENTH_MiB_IN_SECTORS=200
ROOTFS_OPTIONS="defaults" ROOTFS_OPTIONS="defaults"
profile_mode=`cat /proc/cmdline |xargs -n1 echo |grep security_profile= | grep extended` profile_mode=`cat /proc/cmdline |xargs -n1 echo |grep security_profile= | grep extended`
if [ -n "$profile_mode" ]; then if [ -n "$profile_mode" ]; then
# Enable iversion labelling for rootfs when IMA is enabled # Enable iversion labelling for rootfs when IMA is enabled
ROOTFS_OPTIONS="${ROOTFS_OPTIONS},iversion" ROOTFS_OPTIONS="${ROOTFS_OPTIONS},iversion"
fi fi
BLOCK_DEVICE=$(echo $rootfs_device |awk -F/ '{ print $3 }')
optimal_io_size=$(cat /sys/block/$BLOCK_DEVICE/queue/optimal_io_size)
logical_block_size=$(cat /sys/block/$BLOCK_DEVICE/queue/logical_block_size)
alignment_offset=$(cat /sys/block/$BLOCK_DEVICE/alignment_offset)
if [ -z ${optimal_io_size} ] || [ $optimal_io_size -le 0 ]; then
optimal_io_size=$ONE_MiB
wlog "Error finding optimal_io_size. Using the default ${ONE_MiB} value"
fi
if [ -z ${logical_block_size} ] || [ $logical_block_size -le 0 ]; then
logical_block_size=512
wlog "Error finding logical_block_size. Using the default 512 value"
fi
if [ -z ${alignment_offset} ]; then
alignment_offset=0
wlog "Error finding alignment_offset. Using the default 0 value"
fi
wlog "Optimal IO size: ${optimal_io_size}, logical block size: ${logical_block_size}, alignment offset: ${alignment_offset}."
START_POINT=$(( ($optimal_io_size + $alignment_offset)/$logical_block_size ))
if [ -d /sys/firmware/efi ] ; then if [ -d /sys/firmware/efi ] ; then
BACKUP_PART=${ROOTFS_PART_PREFIX}1 BACKUP_PART=${ROOTFS_PART_PREFIX}1
BACKUP_PART_NO=1 BACKUP_PART_NO=1
START_POINT=1 SIZE_SEC=$(( ($PLATFORM_BACKUP_SIZE * $ONE_MiB )/$logical_block_size ))
END_POINT=$(($START_POINT + $PLATFORM_BACKUP_SIZE)) END_POINT=$(( $START_POINT + $SIZE_SEC - 1 ))
BACKUP_END_POINT=$END_POINT BACKUP_END_POINT=$END_POINT
if [ $BACKUP_CREATED -eq 0 ] ; then if [ $BACKUP_CREATED -eq 0 ] ; then
wlog "Creating platform backup partition of ${PLATFORM_BACKUP_SIZE}MiB from ${START_POINT}MiB to ${END_POINT}MiB." wlog "Creating platform backup partition of ${PLATFORM_BACKUP_SIZE}MiB from ${START_POINT}s to ${END_POINT}s."
exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary ext4 ${START_POINT}MiB ${END_POINT}MiB" exec_retry 5 0.5 "parted $rootfs_device mkpart primary ext4 ${START_POINT}s ${END_POINT}s"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!" [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
fi fi
START_POINT=$END_POINT START_POINT=$(( $END_POINT + 1 ))
END_POINT=$(($START_POINT + $EFI_SIZE)) SIZE_SEC=$(( ($EFI_SIZE * $ONE_MiB )/$logical_block_size ))
wlog "Creating EFI partition of ${EFI_SIZE}MiB from ${START_POINT}MiB to ${END_POINT}MiB." END_POINT=$(( $START_POINT + $SIZE_SEC - 1))
exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary fat32 ${START_POINT}MiB ${END_POINT}MiB" wlog "Creating EFI partition of ${EFI_SIZE}MiB from ${START_POINT}s to ${END_POINT}s."
exec_retry 5 0.5 "parted $rootfs_device mkpart primary fat32 ${START_POINT}s ${END_POINT}s"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!" [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
cat<<EOF>>/tmp/part-include cat<<EOF>>/tmp/part-include
@ -40,16 +65,32 @@ EOF
else else
BACKUP_PART=${ROOTFS_PART_PREFIX}2 BACKUP_PART=${ROOTFS_PART_PREFIX}2
BACKUP_PART_NO=2 BACKUP_PART_NO=2
# Although we calculate proper sector between which to create the bios
# partition, we still create it between 1MiB and 2MiB to take into account
# upgrade scenarios.
# If upgrading from version N to N+1, version N might have non-aligned bios
# partition, but right after it will be the platform backup partition. If
# the alignment is bad, then if we try to align the bios partition by
# shifting it right, we may come over the backup partition, that is not
# deleted by kickstarters.
# Since the bios partition is only used for booting, it not being aligned
# shouldn't cause any issues.
SIZE_SEC=$(( ( $ONE_MiB )/$logical_block_size ))
END_POINT=$(( $START_POINT + $SIZE_SEC - 1 ))
wlog "Creating 1MB BIOS GRUB partition from 1MiB to 2MiB." wlog "Creating 1MB BIOS GRUB partition from 1MiB to 2MiB."
exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary 1MiB 2MiB" exec_retry 5 0.5 "parted $rootfs_device mkpart primary 1MiB 2MiB"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!" [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
START_POINT=2 START_POINT=$(( $END_POINT + 1 ))
END_POINT=$(($START_POINT + $PLATFORM_BACKUP_SIZE)) SIZE_SEC=$(( ($PLATFORM_BACKUP_SIZE * $ONE_MiB )/$logical_block_size ))
END_POINT=$(( $START_POINT + $SIZE_SEC - 1 ))
BACKUP_END_POINT=$END_POINT BACKUP_END_POINT=$END_POINT
if [ $BACKUP_CREATED -eq 0 ] ; then if [ $BACKUP_CREATED -eq 0 ] ; then
wlog "Creating platform backup partition of ${PLATFORM_BACKUP_SIZE}MiB from ${START_POINT}MiB to ${END_POINT}MiB." wlog "Creating platform backup partition of ${PLATFORM_BACKUP_SIZE}MiB from ${START_POINT}s to ${END_POINT}s."
exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary ext4 ${START_POINT}MiB ${END_POINT}MiB" exec_retry 5 0.5 "parted $rootfs_device mkpart primary ext4 ${START_POINT}s ${END_POINT}s"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!" [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
fi fi
cat<<EOF>>/tmp/part-include cat<<EOF>>/tmp/part-include
@ -57,21 +98,23 @@ part biosboot --asprimary --fstype=biosboot --onpart=${ROOTFS_PART_PREFIX}1
EOF EOF
fi fi
START_POINT=$END_POINT START_POINT=$(( $END_POINT + 1 ))
END_POINT=$(($START_POINT + $BOOT_SIZE)) SIZE_SEC=$(( ($BOOT_SIZE * $ONE_MiB )/$logical_block_size ))
wlog "Creating boot partition of ${BOOT_SIZE}MiB from ${START_POINT}MiB to ${END_POINT}MiB." END_POINT=$(( $START_POINT + $SIZE_SEC - 1 ))
exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary ext4 ${START_POINT}MiB ${END_POINT}MiB" wlog "Creating boot partition of ${BOOT_SIZE}MiB from ${START_POINT}s to ${END_POINT}s."
exec_retry 5 0.5 "parted $rootfs_device mkpart primary ext4 ${START_POINT}s ${END_POINT}s"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!" [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
START_POINT=$END_POINT START_POINT=$(( $END_POINT + 1 ))
END_POINT=$(($START_POINT + $ROOTFS_SIZE)) SIZE_SEC=$(( ($ROOTFS_SIZE * $ONE_MiB )/$logical_block_size ))
wlog "Creating rootfs partition of ${ROOTFS_SIZE}MiB from ${START_POINT}MiB to ${END_POINT}MiB." END_POINT=$(( $START_POINT + $SIZE_SEC - 1 ))
exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary ext4 ${START_POINT}MiB ${END_POINT}MiB" wlog "Creating rootfs partition of ${ROOTFS_SIZE}MiB from ${START_POINT}s to ${END_POINT}s."
exec_retry 5 0.5 "parted $rootfs_device mkpart primary ext4 ${START_POINT}s ${END_POINT}s"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!" [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
START_POINT=$END_POINT START_POINT=$(( $END_POINT + 1 ))
wlog "Creating cgcs-vg partition of ${CGCS_PV_SIZE}MiB from ${START_POINT}MiB to 100%." wlog "Creating cgcs-vg partition of ${CGCS_PV_SIZE}MiB from ${START_POINT}s to 100%."
exec_retry 5 0.5 "parted -s $rootfs_device mkpart extended ${START_POINT}MiB 100%" exec_retry 5 0.5 "parted $rootfs_device mkpart extended ${START_POINT}s 100%"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!" [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
if [ $BACKUP_CREATED -ne 0 ] ; then if [ $BACKUP_CREATED -ne 0 ] ; then
@ -79,8 +122,8 @@ if [ $BACKUP_CREATED -ne 0 ] ; then
if [ $BACKUP_CURRENT_SIZE -lt $PLATFORM_BACKUP_SIZE ] ; then if [ $BACKUP_CURRENT_SIZE -lt $PLATFORM_BACKUP_SIZE ] ; then
wlog "Backup partition size is ${BACKUP_CURRENT_SIZE}MiB, resizing to ${PLATFORM_BACKUP_SIZE}MiB." wlog "Backup partition size is ${BACKUP_CURRENT_SIZE}MiB, resizing to ${PLATFORM_BACKUP_SIZE}MiB."
# parted will throw an error about overlapping with the next partition if we don't do this # parted will throw an error about overlapping with the next partition if we don't do this
BACKUP_END_POINT=$(($BACKUP_END_POINT - 1)).9 BACKUP_END_POINT=$(( $BACKUP_END_POINT - $ONE_TENTH_MiB_IN_SECTORS ))
exec_retry 5 0.5 "parted -s $rootfs_device resizepart $BACKUP_PART_NO ${BACKUP_END_POINT}MiB" exec_retry 5 0.5 "parted $rootfs_device resizepart $BACKUP_PART_NO ${BACKUP_END_POINT}s"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: resize of platform backup partition failed!" [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: resize of platform backup partition failed!"
exec_retry 2 0.1 "e2fsck -p -f $BACKUP_PART" exec_retry 2 0.1 "e2fsck -p -f $BACKUP_PART"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: e2fsck failed on platform backup partition!" [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: e2fsck failed on platform backup partition!"