diff --git a/kickstart/files/kickstart.cfg b/kickstart/files/kickstart.cfg
index 4be55d53..d9511246 100644
--- a/kickstart/files/kickstart.cfg
+++ b/kickstart/files/kickstart.cfg
@@ -2907,40 +2907,6 @@ iface vlan${mgmt_vlan} ${boot_address_family} static
     post-up  echo 0 > /proc/sys/net/ipv6/conf/vlan${mgmt_vlan}/autoconf; echo 0 > /proc/sys/net/ipv6/conf/vlan${mgmt_vlan}/accept_ra; echo 0 > /proc/sys/net/ipv6/conf/vlan${mgmt_vlan}/accept_redirects
 EOF
 
-    # Reject DHCPOFFER from DHCP server that doesn't send
-    # wrs-install-uuid option
-    echo "require wrs-install-uuid;" >>/etc/dhcp/dhclient.conf
-    echo "require dhcp6.wrs-install-uuid;" >>/etc/dhcp/dhclient.conf
-    # set the same DUID-LL IDs (see RFC 8415) that will be used during regular operations
-    echo "send dhcp6.client-id = concat(00:03:00, hardware);" >>/etc/dhcp/dhclient.conf
-    echo "send dhcp-client-identifier = concat(00:03:00, hardware);" >>/etc/dhcp/dhclient.conf
-
-    # Bring up the boot vlan so that a dhcp lease is acquired and an address is
-    # setup prior to the post-install reboot.  This is so that the timing of the IP
-    # address allocation is similar to how normal/non-pxe installation works.
-    boot_iface=vlan${mgmt_vlan}
-    ilog "boot_iface=vlan${mgmt_vlan}"
-    ilog "boot_address_family: ${boot_address_family}"
-
-    dhclient_family=$([[ ${boot_address_family} == "inet" ]] && echo -4 || echo -6)
-    ilog "dhclient_family: ${dhclient_family}"
-    ilog "ip link add link ${boot_dev} name ${boot_iface} type vlan id ${mgmt_vlan}"
-
-    ip link add link ${boot_dev} name ${boot_iface} type vlan id ${mgmt_vlan}
-
-    ilog "ip link set up dev ${boot_iface}"
-    ip link set up dev ${boot_iface}
-
-    timeout_value=60
-    dhclient_request="/usr/sbin/dhclient $dhclient_family $boot_iface"
-    ilog "timeout ${timeout_value} ${dhclient_request}"
-    timeout ${timeout_value} ${dhclient_request}
-    rc=${?}
-    if [ ${rc} -ne 0 ] ; then
-        wlog "timeout ${timeout_value} ${dhclient_request} failed ; rc:${rc}"
-    else
-        ilog "${dhclient_request} complete"
-    fi
 fi
 
 # Clean machine-id file, it needs to be generated after install.