#
# Copyright (c) 2022-2023 Wind River Systems, Inc.
# SPDX-License-Identifier: Apache-2.0
#
############################################################################
#
# StarlingX Debian Unified Miniboot/USB Install Kickstart
#
############################################################################
#
# This is the unified kickstart for Debian installation of subcloud nodes
# from the USB or over Redfish.
#
# IMPORTANT:
# This file is derived from kickstart.cfg. Since we must pull bug fixes
# from kickstart.cfg, developers should be mindful to minimize the diff
# between the two files.
#
# The Linux Assembly Tool (LAT) performs a unified install for all subcloud
# nodes and exposes boot loader environment variables to this kickstart.
#
# This kickstart must be called with the 'traits=' boot parameter.
# Valid traits are:
#
#   controller                          ... the controller function
#   storage                             ... the storage function
#   worker                              ... the worker function
#   lowlatency                          ... the low latency function
#
# Valid node personality trait groupings  ... set configuration function
#
#   traits=controller                   ... Controller
#   traits=controller,worker            ... All-in-one
#   traits=controller,worker,lowlatency ... All-in-one Low Latency
#   traits=storage                      ... Storage
#   traits=worker                       ... Worker
#   traits=worker,lowlatency            ... Worker Low Latency
#
# Kickstart Stages
#
#   Kickstart Early - Common Functions Script
#   Pre Partition - Pre Disk Setup Common Script
#   Partition     - Partition Disks
#   Mkfs          - Format Partitions & LVM Volumes
#   Post          - Traits & Platform Config File update
#   Post          - Persistent Interface Setup
#   Post          - Set Kernel Args
#   Post          - Interface Setup
#   Post Nochroot - Kickstart Finalize Install UUID
#   Post Nochroot - Restage OSTree repo
#                 - Save Install Scripts and Logs
#   Post          - Log Filesystem Setup
#   Post Nochroot - Workarounds for enabling integration
#   Post Nochroot - Set up filesystems access
#   Post Nochroot - Set up package links per node type
#
###########################################################################
#
# The first kickstart script creates '/tmp/lat/functions' common functions
# file that can be loaded from any of the other hook sections.
#
###########################################################################
# Kickstart Early - Common Functions Script
%ks-early --interpreter=/bin/bash

# Define a hook to report error log if install failed
cat << EOF > /tmp/lat/report_error_log.sh
#!/bin/bash
_dev=\$(blkid --label fluxdata -o device)
if [ "\$_dev" != "" ] ; then
    mkdir -p /t
    mount -o rw,noatime \$_dev /t
    echo "Save install-fail.log to partition fluxdata /var (\$_dev)"
    sleep 2
    cp /install.log /t/install-fail.log
    umount /t
fi
EOF
chmod 755 /tmp/lat/report_error_log.sh

cat << EOF >> /tmp/lat/ks_functions.sh

[ "\${HOOK_LABEL}" = "" ] && HOOK_LABEL="unknown"

export LOG_DIR="var/log"
export LAT_DIR="tmp/lat"
export LOGFILE="/\${LAT_DIR}/miniboot.log"

############################################################################
# log utils
############################################################################
function log()
{
    local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")"
    echo "\$dt miniboot \${HOOK_LABEL}  info: \${prefix} \$1" >>\${LOGFILE}
}

function ilog()
{
    [ -z "\${stdout}" ] && stdout=1
    local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")"
    echo "\$dt miniboot \${HOOK_LABEL}  info: \${prefix} \$1" >&\${stdout}
    echo "\$dt miniboot \${HOOK_LABEL}  info: \${prefix} \$1" >>\${LOGFILE}
}

function dlog()
{
    if [ \${debug} -ne 0 ] ; then
        [ -z "\$stdout" ] && stdout=1
        local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")"
        echo "\$dt miniboot \${HOOK_LABEL} debug: \${prefix} \$1" >&\${stdout}
        echo "\$dt miniboot \${HOOK_LABEL} debug: \${prefix} \$1" >>\${LOGFILE}
    fi
}

function wlog()
{
    [ -z "\$stdout" ] && stdout=1
    local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")"
    echo "\$dt miniboot \${HOOK_LABEL}  warn: \${prefix} \$1" >&\${stdout}
    echo "\$dt miniboot \${HOOK_LABEL}  warn: \${prefix} \$1" >>\${LOGFILE}
}

function elog()
{
    [ -z "\$stdout" ] && stdout=1
    local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")"
    echo "\$dt miniboot \${HOOK_LABEL} error: \${prefix} \$1" >&\${stdout}
    echo "\$dt miniboot \${HOOK_LABEL} error: \${prefix} \$1" >>\${LOGFILE}
}

########################################################################
# Name      : report_failure_with_msg
# Purpose   : Report installation error, offer a console and
#             reboot on exit.
# Parameters: \$1 is the failure message string
# Return    : Does not return
########################################################################
function report_failure_with_msg()
{
    local msg=\${1}
    echo -e '\n\nInstallation failed.\n'
    wlog "Installation Failed: ERROR: \${msg}"
    echo "... dropping to shell ; exit to reboot ..."
    sleep 1
    bash
    reboot -f
}

########################################################################
# Name      : get_disk
# Parameters: \$1 - any disk path
# Returns   : echo of the canonicalized version of the disk path
#
# Example   : /dev/sda -> /dev/sda
#           : /dev/nvme1n1 -> /dev/nvme1n1
#           : /dev/disk/by-path/pci-0000:02:00.0-scsi-0:1:0:0 -> /dev/sda
#           : /dev/disk/by-id/wwn-0x50014ee6ae58b07f -> /dev/sdc
#           : /dev/disk/by-id/wwn-0x600508b1001c2a30 -> /dev/dm-0
#########################################################################
function get_disk()
{
    echo "\$(cd /dev ; readlink -f \$1)"
}

#########################################################################
# Name      : get_persistent_disk
# Parameters: \$1 - device name i.e. /dev/sda
# Returns   : echo of device name by-path or by-id
#    example: /dev/disk/by-path/pci-0000:03:00.0-scsi-0:2:0:0 or
#             /dev/disk/by-id/wwn-0x50014ee6ae58b07f
#
# Notes: During kickstarts there are 2 links to a generic /dev/sd<X>.
#        Example: pci-0000:00:1f.2-ata-1 and pci-0000:00:1f.2-ata-1.0.
#        After reboot only the longer 'ata-1.0' exists.
#        Reverse the parsing so we return the longer path.
#########################################################################
function get_persistent_disk()
{
    local dev=\$(cd /dev ; readlink -f \$1)
    case \$dev in
        *"dm-"*)
            for p in /dev/disk/by-id/wwn-*; do
                if [ "\$(basename \$dev)" = "\$(basename \$(readlink -f \$p))" ]; then
                    echo "\$p"
                    return
                fi
            done
            ;;
        *)
            reverse_list=""
            for p in /dev/disk/by-path/*; do
                reverse_list="\${p} \${reverse_list}"
            done
            for p in \${reverse_list}; do
                if [ "\$(basename \$dev)" = "\$(basename \$(readlink -f \$p))" ]; then
                    echo "\$p"
                    return
                fi
            done
            ;;
    esac
}

#########################################################################
# Name      : get_part_prefix
# Parameters: \$1 - device name i.e. /dev/sda, /dev/nvme0n1, /dev/dm-0
# Returns   : echo of acceptable partition prefix
#    example: /dev/sda
#             /dev/nvme0n1p
#             /dev/disk/by-id/wwn-0x50014ee6ae58b07f-part
#########################################################################
function get_part_prefix()
{
    # ensure that we have a canonicalized device
    local dev=\$(cd /dev ; readlink -f \$1)
    case \$dev in
        *"nvme"*)
            echo "\${dev}p"
            ;;
        *"dm-"*)
            for p in /dev/disk/by-id/wwn-*; do
                if [ "\$dev" = "\$(readlink -f \$p)" ]; then
                    echo "\${p}-part"
                    return
                fi
            done
            ;;
        *)
            echo "\${dev}"
            ;;
    esac
}

#########################################################################
# Name      : exec_retry
# Purpose   : Retry operations up to a caller specified ...
# Parameters: $1 - retries - up to number of retries before giving up
#             $2 - time in seconds between each retry
#             $3 - the command string to execute
# Returns   : exit code from last command operation
#########################################################################
function exec_retry()
{
    local retries=\${1}
    local interval=\${2}
    local command=\${3}

    # local variables
    retry_count=1
    local ret_code=0
    local ret_stdout=""

    command="\${command}" # 2>&\${stdout}"
    while [ \${retry_count} -le \${retries} ]; do
        # dlog "Running command: '\${command}'."
        ret_stdout=\$(eval \${command})
        ret_code=\${?}
        [ \${ret_code} -eq 0 ] && break
        wlog "Error running command '\${command}'. Try \${retry_count} of \${retries} retry in \${interval}s."
        wlog "ret_code: \${ret_code}, stdout: '\${ret_stdout}'."
        sleep \${interval}
        retry_count=\$((retry_count+1))
    done
    echo "\${ret_stdout}"
    return \${ret_code}
}

#########################################################################
# Name      : exec_no_fds
# Purpose   : Execute command (with retries) after closing fds
# Parameters: $1 - List of volume file descriptors
#             $2 - the command string to execute
#             $3 - up to number of retries before giving up
#             $4 - time in seconds between each retry
# Returns   : exit code from last command operation
#########################################################################

function exec_no_fds()
{
    # Close open FDs when executing commands that complain about leaked FDs.
    local fds=\${1}
    local cmd=\${2}
    local retries=\${3}
    local interval=\${4}

    local ret_code=0
    local ret_stdout=""
    for fd in \${fds}
    do
        local cmd="\${cmd} \$fd>&-"
    done
    if [ -z "\${retries}" ]; then
        #wlog "Running command: '\${cmd}'."
        eval "\${cmd}"
    else
        ret_stdout=\$(exec_retry "\${retries}" "\${interval}" "\${cmd}")
        ret_code=\${?}
        echo "\${ret_stdout}"
        return \${ret_code}
    fi
}

#########################################################################
# Name     : is_miniboot
# Returns  : true : 0 if this is remote subcloud install (redfish)
#            false: 1
#########################################################################
function is_miniboot()
{
    if [ "\$(grep -c 'ip=' /proc/cmdline)" -ne 0 ]; then
        return 0
    else
        return 1
    fi
}

#########################################################################
# Name     : is_system_node_install
# Returns  : true : 0 if 'pxecontroller' is in $insturl boot arg
#            false: 1
#########################################################################
function is_system_node_install()
{
    # minboot: always false
    return 1
}

#########################################################################
# Name     : is_usb_install
# Returns  : true :0
#            false:1
#########################################################################
function is_usb_install()
{
    # minboot: always false
    return 1
}

#########################################################################
# Name     : check_prestage
# Returns  : true :0
#            false:1
#########################################################################
function check_prestage()
{
    # minboot: always false
    return 1
}

#########################################################################
# Name     : is_prestage
# Returns  : true :0
#            false:1
#########################################################################
function is_prestage()
{
    # minboot: always false
    return 1
}
#########################################################################
# Name     : update_platform_conf
# Purpose  : Update the platform.conf file with logging
#########################################################################

PLATFORM_CONF="/etc/platform/platform.conf"
function update_platform_conf()
{
    ilog "update \${IMAGE_ROOTFS}\${PLATFORM_CONF} : \${1}"
    echo "\${1}" >> \${IMAGE_ROOTFS}\${PLATFORM_CONF}
}

#########################################################################
# Name     : get_iface_from_ethname
# Purpose  : Translate eth# interface to the alternate predicitive
#            interface name'altname'.
# Parameter: eth# name interface string to translate
# Return   : echo's of altname interface string
#########################################################################
# TODO: Move to where its used if there is only one section caller
function get_iface_from_ethname()
{
    iface=\${1}

    # log the interface info for post issue debug
    udevadm info --export --query=property --path=/sys/class/net/\${iface} >> \${LOGFILE}

    # convert to predictive name: ONBOARD > SLOT > PATH
    # https://wiki.debian.org/NetworkInterfaceNames
    altname=\$(udevadm info --export --query=property --path=/sys/class/net/\${iface} | grep ID_NET_NAME_ONBOARD)
    altname=\${altname#ID_NET_NAME_ONBOARD=}

    if [ -z "\${altname}" ] ; then
        # try searching for ID_NET_NAME_SLOT
        log "... retrying to translate \${iface} to predictive name with ID_NET_NAME_SLOT filter label "
        altname=\$(udevadm info --export --query=property --path=/sys/class/net/\${iface} | grep ID_NET_NAME_SLOT)
        altname=\${altname#ID_NET_NAME_SLOT=}
    fi

    if [ -z "\${altname}" ] ; then
        # try searching for ID_NET_NAME_PATH
        log "... retrying to translate \${iface} to predictive name with ID_NET_NAME_PATH filter label "
        altname=\$(udevadm info --export --query=property --path=/sys/class/net/\${iface} | grep ID_NET_NAME_PATH)
        altname=\${altname#ID_NET_NAME_PATH=}
    fi

    # The altname is seen enveloped with tick's ; 'eno1'
    # Handle with and without tick's just in case
    if [ -z "\${altname}" ] ; then
        log "Failed to translate \${iface} to predictive name"
    elif [ "\${altname::1}" = "'" ] ; then
        echo "\${altname:1:-1}"
    else
        echo "\${altname}"
    fi
}

function display_volume_info ()
{
    if [ \${debug} -ne 0 ] ; then
        ilog "Volume Info:\${1}"

        pvscan 2>/dev/null
        pvscan 2>/dev/null >> \${LOGFILE}

        lvscan 2>/dev/null
        lvscan 2>/dev/null >> \${LOGFILE}

        pvdisplay 2>/dev/null
        pvdisplay 2>/dev/null >> \${LOGFILE}

        lvdisplay 2>/dev/null
        lvdisplay 2>/dev/null >> \${LOGFILE}
    fi
}

display_mount_info()
{
    if [ \${debug} -ne 0 ] ; then
        echo "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
        lsblk -o name,mountpoint,label,size,uuid
        echo "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
    fi
}

function log_lvm_conf ()
{
    local msg=\${1}
    local conf=\${2}
    lvm_global_filter=\$(cat \${conf} | grep "global_filter =")
    lvm_preferred_names=\$(cat \${conf} | grep "preferred_names =")

    ilog "\${msg}: \${conf}: \${lvm_global_filter}"
    ilog "\${msg}: \${conf}: \${lvm_preferred_names}"
}

function breakpoint()
{
    echo "*** BREAKPOINT ***: \${1} ; type exit to continue"
    bash
    echo "continuing from breakpoint: \${1}"
}

function set_variable()
{
    touch "/\${LAT_DIR}/\${1}"
}

function get_variable()
{
    [ -e "/\${LAT_DIR}/\${1}" ] && return 1
    return 0
}

function clr_variable()
{
    rm -f "/\${LAT_DIR}/\${1}"
}

#########################################################################
# Name     : get_aio_controller_provisioning_sizes
# Purpose  : Provide partition, physical volume, and logical volume sizes
# Parameter: None
# Return   : Nothing, but exports key values
#########################################################################
function get_aio_controller_provisioning_sizes()
{
    gib=\$((1024*1024*1024))

    # Partitions
    export PART_SZ_EFI=300
    export PART_SZ_BOOT=2048
    export PART_SZ_ROOT=0

    # Logical volumes
    export LV_SZ_LOG=8000
    export LV_SZ_ROOT=20480
    export LV_SZ_SCRATCH=16000
    export LV_SZ_VAR=20480

    ##
    ## NOTE: updates to partition sizes need to be also reflected in
    ##  - config/.../sysinv/conductor/manager.py:create_controller_filesystems()
    ##  - config/.../sysinv/common/constants.py
    ##
    ## NOTE: When adding partitions, we currently have a max of 4 primary partitions.
    ##       If more than 4 partitions are required, we can use a max of 3 --asprimary,
    ##       to allow 1 primary logical partition with extended partitions
    ##
    ## NOTE: Max default PV size must align with the default controllerfs sizes
    ##
    ##
    ## NOTE TO REVIEWERS:
    ## This section was talen from CentOS and needs to be updated for Debian.
    ##
    ##***********************************************************************
    ## Large disk install (for disks over 240GB)
    ##  - DB size is doubled to allow for upgrades
    ##
    ## BACKUP_OVERHEAD = 5GiB
    ## DEFAULT_PLATFORM_STOR_SIZE = 10GiB
    ## DEFAULT_DATABASE_STOR_SIZE = 10GiB
    ## BACKUP = DEFAULT_DATABASE_STOR_SIZE +
    ##          DEFAULT_PLATFORM_STOR_SIZE +
    ##          BACKUP_OVERHEAD = 25GiB
    ## LV_SZ_LOG = 8GiB
    ## LV_SZ_ROOT = 20 GiB
    ## LV_SZ_SCRATCH = 16GiB
    ## LV_SZ_VAR = 20 GiB
    ## RABBIT_LV = 2GiB
    ## DEFAULT_EXTENSION_STOR_SIZE = 1GiB
    ## KUBERNETES_DOCKER_STOR_SIZE = 30GiB
    ## DOCKER_DISTRIBUTION_STOR_SIZE = 16GiB
    ## ETCD_STOR_SIZE = 5GiB
    ## CEPH_MON_SIZE = 20GiB
    ## KUBELET_STOR_SIZE = 10GiB
    ## DC_VAULT_SIZE = 15GiB
    ## RESERVED_PE = 16MiB (based on pesize=32768)
    ##
    ## MINIMUM_PLATFORM_PV_SIZE = (10 + 2*10 + 25 + 8 + 20 + 16 + 20 + 2 + 1 + 30 + 16 + 5 + 20 + 10 + 15)GiB + 16MiB/1024 = 218.02GiB
    ##
    ##***********************************************************************
    ## Small disk install - (for disks below 240GB)
    ##  - DB size is doubled to allow for upgrades
    ##
    ## DEFAULT_PLATFORM_STOR_SIZE = 10GiB
    ## DEFAULT_SMALL_DATABASE_STOR_SIZE = 5GiB
    ## DEFAULT_SMALL_BACKUP_STOR_SIZE = 20GiB
    ##
    ## LV_SZ_LOG = 8GiB
    ## LV_SZ_SCRATCH = 16GiB
    ## RABBIT_LV = 2GiB
    ## DEFAULT_EXTENSION_STOR_SIZE = 1GiB
    ## KUBERNETES_DOCKER_STOR_SIZE = 30GiB
    ## DOCKER_DISTRIBUTION_STOR_SIZE = 16GiB
    ## ETCD_STOR_SIZE = 5GiB
    ## CEPH_MON_SIZE = 20GiB
    ## KUBELET_STOR_SIZE = 10GiB
    ## DC_VAULT_SIZE = 15GiB
    ## RESERVED_PE = 16MiB (based on pesize=32768)
    ##
    ## MINIMUM_PLATFORM_PV_SIZE = (10 + 2*5 + 20 + 8 + 16 + 2 + 1 + 30 + 16 + 5 + 20 + 10 + 15)GiB + 16MiB/1024 = 163.02GiB
    ##
    ##***********************************************************************
    ## Tiny disk install - (for disks below 154GB)
    ##
    ## NOTE: Tiny disk setup is mainly for StarlingX running in QEMU/KVM VM.
    ##
    ## DEFAULT_TINY_PLATFORM_STOR_SIZE = 1GiB
    ## DEFAULT_TINY_DATABASE_STOR_SIZE = 1GiB
    ## DEFAULT_TINY_BACKUP_STOR_SIZE = 1GiB
    ##
    ## LV_SZ_LOG = 3GiB
    ## LV_SZ_SCRATCH = 2GiB
    ## RABBIT_LV = 2GiB
    ## DEFAULT_EXTENSION_STOR_SIZE = 1GiB
    ## TINY_KUBERNETES_DOCKER_STOR_SIZE = 20GiB
    ## TINY_DOCKER_DISTRIBUTION_STOR_SIZE = 8GiB
    ## TINY_ETCD_STOR_SIZE = 1GiB
    ## TINY_KUBELET_STOR_SIZE = 2GiB
    ##
    ## MINIMUM_PLATFORM_PV_SIZE = (1 + 2*1 + 1 + 3 + 2 + 2 + 1 + 20 + 8 + 1 + 2)GiB = 43GiB
    ##
    ## MINIMUM_TINY_DISK_SIZE = MINIMUM_PLATFORM_PV_SIZE + PART_SZ_ROOT + PART_SZ_EFI + PART_SZ_BOOT + FLUXDATA + BACKUP_SIZE
    ##                        = 43 + 20 + 0.03 + 0.5 + 20 + 1 = 85GiB

    # TODO: create a log representing 'free space" on self expand partition.

    # TODO: Do the math for this new environment

    # The default disk size thresholds must align with the ones in
    #   config/.../sysinv/common/constants.py
    #   which are DEFAULT_SMALL_DISK_SIZE
    #             MINIMUM_SMALL_DISK_SIZE
    default_small_disk_size=240
    minimum_small_disk_size=196
    sz=\$(blockdev --getsize64 \${INSTDEV})
    ilog "Install disk \${INSTDEV} has size:\${sz}B, \$((\${sz}/\$gib))GiB"

    # Round MINIMUM_PLATFORM_PV_SIZE to the closest upper value that can be divided by 1024.
    if [ \${sz} -gt \$((\${default_small_disk_size}*\${gib})) ] ; then
        ilog "Large disk: MINIMUM_PLATFORM_PV_SIZE=219GiB*1024=224256 MiB"
        export BACKUP_DEFAULT_PERSISTENT_SIZE=30000
    elif [ \${sz} -ge \$((\${minimum_small_disk_size}*\${gib})) ] ; then
        ilog "Small disk: MINIMUM_PLATFORM_PV_SIZE=164GiB*1024=167936 MiB"
        export BACKUP_DEFAULT_PERSISTENT_SIZE=30000
    else
        ilog "Tiny disk: MINIMUM_PLATFORM_PV_SIZE=43GiB*1024=44032 MiB"
        # Using a disk with a size under 85GiB will fail.
        export LV_SZ_LOG=3000
        export LV_SZ_SCRATCH=2000
        export BACKUP_DEFAULT_PERSISTENT_SIZE=1000
    fi
}

#########################################################################
# Name     : get_std_controller_provisioning_sizes
# Purpose  : Provide partition, physical volume, and logical volume sizes
# Parameter: None
# Return   : Nothing, but exports key values
#########################################################################
function get_std_controller_provisioning_sizes()
{

    ## NOTE: updates to partition sizes need to be also reflected in
    ## _controller_filesystem_limits() in sysinv/api/controllers/v1/istorconfig.py

    # Partitions
    export PART_SZ_EFI=300
    export PART_SZ_BOOT=2048
    export PART_SZ_ROOT=0
    export BACKUP_DEFAULT_PERSISTENT_SIZE=30000

    # Logical volumes
    export LV_SZ_LOG=8000
    export LV_SZ_ROOT=20480
    export LV_SZ_SCRATCH=16000
    export LV_SZ_VAR=20480

}
#########################################################################
# Name     : get_worker_provisioning_sizes
# Purpose  : Provide partition, physical volume, and logical volume sizes
# Parameter: None
# Return   : Nothing, but exports key values
#########################################################################
function get_worker_provisioning_sizes()
{
    # miniboot: unused
    ilog get_worker_provisioning_sizes
}

#########################################################################
# Name     : get_storage_provisioning_sizes
# Purpose  : Provide partition, physical volume, and logical volume sizes
# Parameter: None
# Return   : Nothing, but exports key values
#########################################################################
function get_storage_provisioning_sizes()
{
    # miniboot: unused
    ilog get_storage_provisioning_sizes
}

#########################################################################
# Name     : parse_miniboot_network_params
# Purpose  : Setup IP addressing for two cases:
#            1) initial boot and 2) persistent across reboot
# Parameter: operation: one of 'initial' or 'persistent'
# Return   : Nothing
#########################################################################
function parse_miniboot_network_params()
{
    BOOTPARAM_MGMT_ADDRESS_FAMILY=
    BOOTPARAM_IP_ADDR=
    BOOTPARAM_VLAN=
    BOOTPARAM_GW=
    BOOTPARAM_PREFIX_LEN=
    BOOTPARAM_IFNAME=
    BOOTPARAM_IP_VER=
    BOOTPARAM_METRIC=
    BOOTPARAM_DNS=

    # Parse values from /proc/cmdline
    local ipstring=
    local vlan=
    for arg in \$(cat /proc/cmdline); do
        case "\${arg}" in
            ip=*)
                ipstring=\${arg:3}
                ilog "Using ip=\$ipstring"
                ;;
            vlan=*)
                vlan=\${arg:5}
                ilog "Using vlan=\${vlan}"
                ;;
        esac
    done

    ilog "Parsing boot ipstring=\$ipstring"

    # Now we have a string like:
    # <client-ip>,,<gw-ip>,<prefixlen>,<hostname>,<device>,off,<dns0-ip>,<dns1-ip>
    #    1       2    3       4            5         6      7     8         9
    # identify if ipv4 or ipv6, and get the ip address
    #
    # 10.10.10.22,,10.10.10.1,23,subcloud2,enp2s1,none   (for ipv4)
    # [2620:10a:a001:d41::212],,,64,subcloud3,ens1f0.401,none (for ipv6)

    BOOTPARAM_IP_ADDR=\$(echo \$ipstring | awk -F',' '{print \$1}' | tr -d '\[\]')
    BOOTPARAM_GW=\$(echo \$ipstring | awk -F',' '{print \$3}' | tr -d '\[\]')
    BOOTPARAM_PREFIX_LEN=\$(echo \$ipstring | awk -F',' '{print \$4}')
    hostname=\$(echo \$ipstring | awk -F',' '{print \$5}')
    BOOTPARAM_IFNAME=\$(echo \$ipstring | awk -F',' '{print \$6}')
    # Do not setup DNS for now - we use IP addresses during boot:
    # BOOTPARAM_DNS=\$(echo \$ipstring | awk -F',' '{print \$8}')

    case "\$ipstring" in
        *'['*)
            # if has [ ] then it is ipv6:
            BOOTPARAM_MGMT_ADDRESS_FAMILY="inet6"
            BOOTPARAM_IP_VER="-6"
            BOOTPARAM_METRIC="metric 1"
            ;;
        *)
            BOOTPARAM_MGMT_ADDRESS_FAMILY="inet"
            ;;
    esac

    if [ -n "\${vlan}" ]; then
        # Parameter format: "bootstrap_interface.bootstrap_vlan:bootstrap_interface"
        dlog "Parsing vlan from \${vlan}"
        vlan=\${vlan#*.}  # remove prefix 'bootstrap_interface.'
        vlan=\${vlan%:*}  # remove suffix ':bootstrap_interface'
        BOOTPARAM_VLAN=\${vlan}
        BOOTPARAM_IFNAME=\${BOOTPARAM_IFNAME%.*}  # remove suffix '.bootstrap_vlan'
    fi

    logmsg="Using IP values: ip:\$BOOTPARAM_IP_ADDR, family: \$BOOTPARAM_MGMT_ADDRESS_FAMILY"
    if [ -n "\$BOOTPARAM_VLAN" ]; then
        logmsg="\$logmsg vlan: \$BOOTPARAM_VLAN, "
    fi
    logmsg="\$logmsg prefix:\$BOOTPARAM_PREFIX_LEN, ifname: \$BOOTPARAM_IFNAME, "
    if [ -n "\${BOOTPARAM_GW}" ]; then
        logmsg="\$logmsg gw:\$BOOTPARAM_GW, "
    fi
    logmsg="\$logmsg metric: \$BOOTPARAM_METRIC, dns: \$BOOTPARAM_DNS"
    ilog "\$logmsg"

    export BOOTPARAM_MGMT_ADDRESS_FAMILY
    export BOOTPARAM_IP_ADDR
    export BOOTPARAM_VLAN
    export BOOTPARAM_GW
    export BOOTPARAM_PREFIX_LEN
    export BOOTPARAM_IFNAME
    export BOOTPARAM_IP_VER
    export BOOTPARAM_METRIC
    export BOOTPARAM_DNS
}

#########################################################################
# Name     : wait_for_interface
# Purpose  : Wait for interface to settle
# Parameter: interface name
# Return   : Nothing
#########################################################################
function wait_for_interface()
{
    local ifname=\$1
    local timeout=\${2:-60}
    local operstate=
    local count_sec=0
    ilog "Waiting for interface \${ifname} to settle... [timeout: \${timeout}s]"
    while [ \${count_sec} -lt \${timeout} ]; do
        sleep 1
        if [ -e /sys/class/net/\${mgmt_dev}/operstate ]; then
            operstate=\$(cat /sys/class/net/\${mgmt_dev}/operstate)
            if [ "\$operstate" = up ]; then
                ilog "\${mgmt_dev} operstate: up"
                return
            fi
            dlog "\${mgmt_dev} operstate: \$operstate"
        fi
        count_sec=\$(( count_sec + 1 ))
    done
    case "\$operstate" in
        unknown)
            # see: https://www.kernel.org/doc/Documentation/networking/operstates.txt
            wlog "Timeout: \${mgmt_dev} operstate: unknown. Allowing boot to continue."
            return
            ;;
        *)
            report_failure_with_msg "Timeout waiting for interface \${ifname} to settle; operstate: \$operstate"
            ;;
    esac
}

##########################################################################
#                      Global Kickstart Constants                        #
##########################################################################
#
# NOTE: exported Variables from other segments are NOT visible from functions
#

# Log the server firmware type
if [ -d /sys/firmware/efi ] ; then
    ilog "UEFI Firmware execution"
    USE_UEFI_PARTITIONS=1
else
    ilog "BIOS Firmware execution"
    USE_UEFI_PARTITIONS=0
fi

if [ "\${controller}" = true ] ; then
    # Legacy locations of the backup partition
    BACKUP_PART_UEFI=1
    BACKUP_PART_BIOS=2

    # Set the expected locations of the backup partition
    if [ "\$USE_UEFI_PARTITIONS" = 0 ] ; then
        BACKUP_PART_NO=\${BACKUP_PART_BIOS}
    else
        BACKUP_PART_NO=\${BACKUP_PART_UEFI}
    fi
    BACKUP_PART_LABEL="platform_backup"

    # Note that the BA5EBA11-0000-1111-2222- is the prefix used by STX and it's
    # defined in sysinv constants.py. Since the 000000000001 suffix is used by
    # custom stx LVM partitions, the next suffix is used for the persistent backup
    # partition (000000000002)
    BACKUP_PART_GUID="BA5EBA11-0000-1111-2222-000000000002"
fi

# Node Personality Trait
TRAIT__CONTROLLER="controller"
TRAIT__STORAGE="storage"
TRAIT__WORKER="worker"
TRAIT__LOWLATENCY="lowlatency"

# System Types
SYSTEM_TYPE__AIO="All-in-one"
SYSTEM_TYPE__STANDARD="Standard"

# Node Subfunctions
SUBFUNCTION__CONTROLLER="\${TRAIT__CONTROLLER}"
SUBFUNCTION__STORAGE="\${TRAIT__STORAGE}"
SUBFUNCTION__WORKER="\${TRAIT__WORKER}"
SUBFUNCTION__AIO="\${TRAIT__CONTROLLER},\${TRAIT__WORKER}"
VOLUME_GROUPS="cgts-vg"
EOF
###############################
# END of Common Functions Block
###############################

chmod 755 /tmp/lat/ks_functions.sh
HOOK_LABEL="ks-early"
. /tmp/lat/ks_functions.sh

##########################################################################
#                     Global Kickstart variables                         #
##########################################################################

export debug=0
export prefix=""

# Assume there is no Platform Backup (persistent) Partition
export BACKUP_PART_FOUND=0
export BACKUP_PART_CURRENT_SIZE=0

export STOR_DEV_FDS=""

export PROC_SELF_FDS="$(ls -1 /proc/$$/fd | egrep -v "^(0|1|2|255)$" | xargs)"
for fd in ${PROC_SELF_FDS}; do
    export realpath=$(readlink -f /proc/$$/fd/"${fd}")
    if [ -e "${realpath}" ]; then
        STOR_DEV_FDS="${STOR_DEV_FDS} ${fd}"
    fi
done

##########################################################################
#                     Local Kickstart variables                          #
##########################################################################
BACKUP_PART_FIRST=0
BACKUP_PART_END=0
BACKUP_PART_SIZE=0
BACKUP_PART_FLAGS=0
BACKUP_PART_NAME=""

##########################################################################

ilog "*****************************************************"
ilog "***   Pre Partition - Volume Remove & Wipe Disk   ***"
ilog "*****************************************************"

if [ -z "${traits}" ] ; then
    report_failure_with_msg "No install traits specified ; need boot arg traits=<controller|worker|storage|lowlatency>"
fi

ilog "Waiting for disks to be available"
udevadm settle --timeout=300 || report_failure_with_msg "udevadm settle failed"
ilog "Disks became available"

export controller=false
export storage=false
export worker=false
export lowlatency=false
export aio=false

for trait in ${traits//,/ }; do
   # dlog "trait:${trait}"
   case ${trait} in
       "controller")      controller=true ;;
       "storage")            storage=true ;;
       "worker")              worker=true ;;
       "lowlatency")      lowlatency=true ;;
       *) wlog "unknown trait '${trait}'" ;;
   esac
done

# Force enable 'lowlatency' trait if the realtime kernel is detected ; PREEMPT_RT
uname=$(uname -a)
if [[ "${uname}" == *"PREEMPT_RT"* ]] ; then
    if [ "${lowlatency}" = false ] ; then
        wlog "forcing lowlatency trait after discovering the RT kernel"
        lowlatency=true
    fi
fi

# Handle trait conbination errors
#
# Handle no valid nodetypes specified
if [ "${controller}" = false -a "${storage}" = false -a "${worker}" = false ] ; then
    report_failure_with_msg "No valid install traits specified ; ${traits} ; need boot arg traits=<controller|worker|storage>"
# Storage and controller don't go together
elif [ "${storage}" = true -a "${controller}" = true ] ; then
    report_failure_with_msg "Cannot combine storage and controller traits"
# Storage and lowlatency don't go together
elif [ "${storage}" = true -a "${lowlatency}" = true ] ; then
    report_failure_with_msg "Cannot combine storage and lowlatency traits"
# Storage and worker don't go together
elif [ "${storage}" = true -a "${worker}" = true ] ; then
    report_failure_with_msg "Cannot combine storage and worker traits"
else
    ilog "Install traits: $traits"
fi

# setup the install type for the log prefix
if [ "${controller}" = true -a "${worker}" = true ] ; then
    aio=true
    prefix="${SYSTEM_TYPE__AIO}"
elif [ "${controller}" = true ] ; then
    prefix="${TRAIT__CONTROLLER}"
elif [ "${worker}" = true ] ; then
    report_failure_with_msg "Invalid miniboot subcloud traits: $traits"
elif [ "${storage}" = true ] ; then
    report_failure_with_msg "Invalid miniboot subcloud traits: $traits"
fi
if [ "${lowlatency}" = true ] ; then
    prefix="${prefix}-${TRAIT__LOWLATENCY}"
fi

grep -q 'debug_kickstart' /proc/cmdline
if [ $? -eq 0 ]; then
    debug=1
fi

# First, parse /proc/cmdline to find the boot args
set -- `cat /proc/cmdline`
ilog "/proc/cmdline:$*"

# for I in $*; do case "$I" in *=*) eval $I 2>/dev/null;; esac; done
for arg in $*; do
    case "$arg" in
        *=*)
            eval $arg 2>/dev/null
            log "arg : $arg"
            ;;
    esac
done

# Handle persistent_size setting.
# If the persistent_size is less than the size of the existing persistent backup,
# then the installation process must terminate and exit.

if [ -n "${persistent_size}" ]; then
    part=$(readlink -f "/dev/disk/by-partlabel/platform_backup")
    device=$(readlink -f "${rootfs_device}")

    ilog "Persistent backup is in ${part}"

    MAX_SIZE=$(parted -s ${device} unit MiB print | grep "Disk ${device}:" | awk '{print $3}' | sed 's/[^C0-9]*//g')
    CURRENT_PERSISTENT_SIZE=$(parted -s ${part} unit MiB print | grep ${part} | awk '{print $3}' | sed 's/[^C0-9]*//g')
    ilog "Current size of persistent backup is ${CURRENT_PERSISTENT_SIZE}"
    ilog "Max size of ${device} is ${MAX_SIZE}"

    if [ ${persistent_size} -lt ${CURRENT_PERSISTENT_SIZE} ]; then
        ilog "Provided persistent_size (${persistent_size}) is less than ${CURRENT_PERSISTENT_SIZE}"
        report_failure_with_msg "Persistent size setting is less than current backup size (${CURRENT_PERSISTENT_SIZE})"
    fi

    if [ ${persistent_size} -gt ${MAX_SIZE} ]; then
        ilog "Provided persistent_size (${persistent_size}) is greater than ${MAX_SIZE}"
        report_failure_with_msg "Persistent size setting is greater than maximum allowable size (${MAX_SIZE})"
    fi
fi

# Note: This is equivalent to pre_disk_setup_common.cfg

# Name   : check_execs
# Purpose: Confirm all the executables required by the kickstart are present
# Returns: 1 of one or more executable are missing
REQUIRED_EXECS="bc blkid dd lvcreate mkfs.ext4 partprobe pvremove pvs sgdisk vgcreate wipefs"

function check_execs()
{
    missing_exec=0
    for x in ${REQUIRED_EXECS} ; do
        which ${x} > /dev/null 2>&1
        if [ ${?} -ne 0 ] ; then
            elog "dependency check failed ; required '${x}' exec is missing"
            missing_exec=1
        fi
    done
    return ${missing_exec}
}

# Log Traits
[ "${controller}" = true ] && ilog "Controller Function"
[ "${storage}" = true ] && ilog "Storage Function"
[ "${worker}" = true ] && ilog "Worker Function"
[ "${lowlatency}" = true ] && ilog "Low Latency Function"

# Log System Type
if [ ${aio} = true ] ; then
    ilog "system"
else
    ilog "${SYSTEM_TYPE__STANDARD} system"
fi

# Verify that all the required executables are presenty
check_execs
[ $? -ne 0 ] && report_failure_with_msg "Required executables are missing"

####################################################
# pre_common_head  (obsolete with lat)
####################################################
# TODO: The installer does not have 'timezone'
#       Does LAT handle this ?
wlog "timezone not set ; 'timezone --nontp --utc UTC'"

# We need both the system date and hwclock to be "close" to the current
# date/time, in order to avoid cases of invalid SSL certificates during
# interaction with the system controller. With the 'instdate'
# boot paramter, the system clock will already be initialized by LAT.
# If the hwclock differs from system date by a significant amount then
# we update it here based on the current system date.
#
# System date initialization summary:
# Note: NTP is not running at these early stages of install
#
# miniboot:
#   - The system date is initialized to 'instdate' via LAT.
#     Note that this may be several minutes out of sync with reality
#     since instdate is a snapshot at time of bootimage.iso creation.
#
# ostree boot (after miniboot, prior to subcloud bootstrap):
#   - The system date is initialized via hwclock.
#
# During miniboot we may have the case where the hwclock is more accurate
# than the system date.  We therefore only want to adjust the hwclock if
# it is significantly different.
if [ -n "${instdate}" ]; then
    ilog "Checking hwclock: $(hwclock), current date: $(date), instdate: $(date --date=${instdate})"
    # Only adjust if date mismatch is > 20m
    date_mismatch_threshold_secs=1200
    current_date_epoch=$(date "+%s")
    hwclock_date_epoch=$(date --date="$(hwclock --get --utc)" "+%s")
    diff_epoch=$(( current_date_epoch - hwclock_date_epoch ))
    # absolute value: strip off any '-' from front of string:
    abs_diff_epoch=${diff_epoch#-}
    if [ ${abs_diff_epoch} -gt ${date_mismatch_threshold_secs} ]; then
        if [ -e /sbin/hwclock ] ; then
            ilog "Aligning hwclock to system date"
            /sbin/hwclock --systohc --utc
            if [ $? -ne 0 ]; then
                wlog "failed hwclock command ; /sbin/hwclock --systohc --utc [rc=${rc}]"
            fi
        else
            wlog "lat initrd is missing /sbin/hwclock"
        fi
        ilog "System date is now: $(date), hwclock: $(hwclock)"
    fi
else
    elog "bootimage.iso was constructed without instdate: subcloud date may be out of sync"
fi

true
%end

# Pre Partition - Pre Disk Setup Common Script
%pre-part --interpreter=/bin/bash
HOOK_LABEL="pre-part"
. /tmp/lat/ks_functions.sh


#####################################################
# From pre_net_common.cfg for system node installs
#####################################################
if is_system_node_install -eq 0 ; then

    # Setup ntp.conf and sync time
    cat <<EOF >/etc/ntp_kickstart.conf
server pxecontroller
EOF

    if [ -e /usr/sbin/ntpd ] ; then
        /usr/sbin/ntpd -g -q -n -c /etc/ntp_kickstart.conf
        rc=$?
        if [ ${rc} -eq 0 ]; then
            if [ -e /sbin/hwclock ] ; then
                /sbin/hwclock --systohc --utc
                if [ $? -ne 0 ]; then
                    wlog "failed hwclock command ; /sbin/hwclock --systohc --utc"
                else
                    ilog "ntpd and hwclock set ok"
                fi
            else
                wlog "lat initrd is missing /sbin/hwclock"
            fi
        else
            wlog "ntpd setup failed rc:$rc ; /usr/sbin/ntpd -g -q -n -c /etc/ntp_kickstart.conf"
        fi
    else
        wlog "lat initrd is missing /usr/sbin/ntpd"
    fi
fi

#####################################################
# From pre_disk_setup_common.cfg
#####################################################

if [ -n "${INSTDEV}" ] ; then
    persistent_instdev=$(get_persistent_disk "${INSTDEV}")
    if [ -z ${persistent_instdev} ] ; then
        report_failure_with_msg "invalid install device ${INSTDEV}"
    else
        ilog "Install device: ${INSTDEV} : ${persistent_instdev}"
    fi
fi

# Get all block devices of type disk in the system.
# This includes solid state devices.
# Note: /dev/* are managed by kernel tmpdevfs while links in
#       /dev/disk/by-path/ are managed by udev which updates them
#       asynchronously so avoid using them while performing partition
#       operations.
ilog "Detected storage devices:"
case ${persistent_instdev} in
    *"by-id"*)
        disk_regex='/dev/disk/by-id/wwn-*'
    ;;
    *)
        disk_regex='/dev/disk/by-path/*'
    ;;
esac

STOR_DEVS=""
for f in ${disk_regex} ; do
    dev=$(readlink -f $f)
    # dlog "found device ${f}"
    exec_retry 2 0.5 "lsblk --nodeps --pairs $dev" | grep -q -e 'TYPE="disk"' -e 'TYPE="mpath"'
    if [ $? -eq 0 ]; then
        # Filter out ISO disk from storage devices
        check_valid_dev $dev || continue
        STOR_DEVS="$STOR_DEVS $dev"
        ilog "Adding ${f} -> ${dev} to managed device list"
    fi
done

# Filter STOR_DEVS variable for any duplicates as on some systems udev
# creates multiple links to the same device. This causes issues due to
# attempting to acquire a flock on the same device multiple times.
STOR_DEVS=$(echo "$STOR_DEVS" | xargs -n 1 | sort -u | xargs)
ilog "Unique storage devices: $STOR_DEVS"
if [ -z "$STOR_DEVS" ] ; then
    report_failure_with_msg "No storage devices available."
fi

# Lock all devices so that udev doesn't trigger a kernel partition table
# rescan that removes and recreates all /dev nodes for partitions on those
# devices. Since udev events are asynchronous this could lead to a case
# where /dev/ links for existing partitions are briefly missing.
# Missing /dev links leads to command execution failures.
for dev in $STOR_DEVS; do
    exec {fd}>$dev || report_failure_with_msg "Error creating file descriptor for $dev."
    flock -n "$fd" || report_failure_with_msg "Can't get a lock on fd $fd of device $dev."
    STOR_DEV_FDS="$STOR_DEV_FDS $fd"
    ilog "Locked ${dev} fd:${fd}"
done

# Log info about system state at beginning of partitioning operation
for dev in $STOR_DEVS; do
    ilog "Initial partition table for $dev is:"
    # log "Initial partition table for $dev is:"
    parted -s $dev unit mib print
    # parted -s $dev unit mib print >> ${LOGFILE}
done

display_volume_info "before"
display_mount_info

# Consider removing since LAT already handles this failure mode
# Ensure specified device is not a USB drive
udevadm info --query=property --name="${INSTDEV}" | grep -q '^ID_BUS=usb'
if [ $? -eq 0 ]; then
    report_failure_with_msg "Specified installation (${INSTDEV}) device is a USB drive."
fi

# Log the disk setup
ilog "Volume Groups : ${VOLUME_GROUPS} ; $STOR_DEV_FDS"

# update lvm.conf to prevent udev delays for locked devices
sed -i "s#obtain_device_list_from_udev = 1#obtain_device_list_from_udev = 0#" /etc/lvm/lvm.conf

# Deactivate existing volume groups to avoid Anaconda issues with pre-existing groups
vgs=( $(exec_no_fds "$STOR_DEV_FDS" "vgdisplay -C --noheadings -o vg_uuid 2>/dev/null") )
if [ ${#vgs[@]} -eq 0 ] ; then
    ilog "No volume groups found"
else
    for vg in ${vgs[@]}; do
        lvs=( $(exec_no_fds "$STOR_DEV_FDS" "lvs --select vg_uuid=${vg} --noheadings -o lv_name 2>/dev/null") )
        vg_name=$(exec_no_fds "$STOR_DEV_FDS" "vgdisplay -C --noheadings --select vg_uuid=${vg} -o vg_name 2>/dev/null" | xargs)

        ilog "Wipe any previous signatures from ${vg_name} volume group"
        for lv in ${lvs[@]} ; do
            ilog "Wipe any previous signatures from ${lv} logical volume"
            exec_no_fds "$STOR_DEV_FDS" "wipefs -a /dev/${vg_name}/${lv} 2>/dev/null" 5 0.5 || wlog "Failed to wipe signatures from ${lv}"
        done

        ilog "Disable volume group ${vg}"
        exec_no_fds "$STOR_DEV_FDS" "vgchange -an --select vg_uuid=${vg} 2>/dev/null" 5 0.5
        [ $? -ne 0 ] && report_failure_with_msg "Failed to disable ${vg}."
    done

    for vg in ${vgs[@]}; do
        vg_name=$(exec_no_fds "$STOR_DEV_FDS" "vgdisplay -C --noheadings --select vg_uuid=${vg} -o vg_name 2>/dev/null" | xargs)

        pvs=( $(exec_no_fds "$STOR_DEV_FDS" "pvs --select vg_uuid=${vg} --noheadings -o pv_name 2>/dev/null" | grep -v unknown) )
        if [ ${#pvs[@]} -ne 0 ] ; then
            ilog "Remove logical volumes from ${vg_name} (${vg})"
            exec_no_fds "$STOR_DEV_FDS" "lvremove --force --select vg_uuid=${vg} 2>/dev/null" 5 0.5 || wlog "WARNING: Failed to remove lvs on ${vg_name} (${vg})."

            for pv in ${pvs[@]}; do
                ilog "Remove physical volume ${pv} from ${vg_name} (${vg})"
                exec_no_fds "$STOR_DEV_FDS" "pvremove --force --force --yes ${pv} 2>/dev/null" 5 0.5
                [ $? -ne 0 ] && report_failure_with_msg "Failed to remove ${pv}."
            done
        fi

        ilog "Force remove volume group ${vg_name} (${vg})"
        exec_no_fds "$STOR_DEV_FDS" "vgremove --force --select vg_uuid=${vg} 2>/dev/null" 5 0.5
        [ $? -ne 0 ] && report_failure_with_msg "Failed to remove ${vg_name} (${vg})."

    done
fi

display_volume_info "after"
display_mount_info

ONLYUSE_HDD=""

part_type_guid_str="Partition GUID code"
part_type_name_str="Partition name"
part_type_size_str="Partition size"
part_type_first_str="First sector"
part_type_end_str="Last sector"
part_type_flags_str="Attribute flags"

# The /v1/upgrade/${hostname}/in_upgrade endpoint accepts any textual data
# as hostname and returns system-wide upgrade state
hostname="hostname"


if [ "$(curl -sf http://pxecontroller:6385/v1/upgrade/${hostname}/in_upgrade 2>/dev/null)" = "true" ]; then

    # In an upgrade, only wipe the disk with the rootfs and boot partition
    wlog "In upgrade, wiping only ${INSTDEV}"
    WIPE_HDD=${INSTDEV}
    ONLYUSE_HDD="$(basename ${INSTDEV})"

else

    # Make a list of all the hard drives that are to be wiped.
    # Never put the LAT install disk '${INSTDEV}' in that list.
    WIPE_HDD=""

    # Partition type OSD has a unique globally identifier
    CEPH_OSD_GUID="4FBD7E29-9D25-41B8-AFD0-062C0CEFF05D"
    CEPH_OSD_MPATH_GUID="4FBD7E29-8AE0-4982-BF9D-5A8D867AF560"
    CEPH_JOURNAL_GUID="45B0969E-9B03-4F30-B4C6-B4B80CEFF106"
    CEPH_JOURNAL_MPATH_GUID="45B0969E-8AE0-4982-BF9D-5A8D867AF560"

    # Check if we wipe OSDs
    if [ "$(curl -sf http://pxecontroller:6385/v1/ihosts/wipe_osds 2>/dev/null)" = "true" ]; then
        ilog "Wipe OSD data"
        WIPE_CEPH_OSDS="true"
    else
        ilog "Skip Ceph OSD data wipe."
        WIPE_CEPH_OSDS="false"
    fi

    for dev in $STOR_DEVS ; do
        # TODO: Allowing the install dev 'in' results in a failure mode where
        #       every second install fails with the following error string
        #       and unrecoverable mount failure.
        #
        #       Logs:
        #
        #       Warning: The kernel is still using the old partition table.
        #       The new table will be used at the next reboot or after you
        #       run partprobe(8) or kpartx(8)
        #       and then
        #
        #       Failure:
        #
        #       mount: /sysroot: can't find LABEL=otaroot.
        #
        # Action: Find correct place to put partprobe
        #
        # Avoid wiping the install root disk
        # [ ${dev} == ${INSTDEV} ] && continue

        # Avoid wiping USB drives
        udevadm info --query=property --name=$dev |grep -q '^ID_BUS=usb' && continue

        # Avoid wiping ceph osds if sysinv tells us so
        if [ ${WIPE_CEPH_OSDS} == "false" ]; then
            wipe_dev="true"

            exec_no_fds "$STOR_DEV_FDS" "pvs" | grep -q "$dev *ceph"
            if [ $? -eq 0 ]; then
                wlog "skip rook provisoned disk $dev"
                continue
            fi

            part_numbers=( `parted -s $dev print | awk '$1 == "Number" {i=1; next}; i {print $1}'` )
            # Scanning the partitions looking for CEPH OSDs and
            # skipping any disk found with such partitions
            for part_number in "${part_numbers[@]}"; do
                sgdisk_part_info=$(sgdisk -i $part_number $dev)
                part_type_guid=$(echo "$sgdisk_part_info" | grep "$part_type_guid_str" | awk '{print $4;}')
                if [ "$part_type_guid" == $CEPH_OSD_GUID -o "$part_type_guid" == $CEPH_OSD_MPATH_GUID ]; then
                    wlog "OSD found on $dev, skipping wipe"
                    wipe_dev="false"
                    break
                fi

                dev_part_prefix=$(get_part_prefix "${dev}")
                exec_no_fds "$STOR_DEV_FDS" "pvs" | grep -q -e "${dev_part_prefix}${part_number} *ceph" -e "${dev_part_prefix}p${part_number} *ceph"
                if [ $? -eq 0 ]; then
                    wlog "Rook OSD found on $dev_part_prefix$part_number, skip wipe"
                    wipe_dev="false"
                    break
                fi
            done

            if [ "$wipe_dev" == "false" ]; then
                continue
            fi
        fi

        # Add device to the wipe list
        devname=$(basename $dev)
        if [ -e $dev -a "$ISO_DEV" != "../../$devname" -a "$USB_DEV" != "../../$devname" ]; then
            ilog "Adding ${dev} to list of disks to be wiped"
            if [ -n "$WIPE_HDD" ]; then
                ilog "WIPE_HDD=$WIPE_HDD,$dev"
                WIPE_HDD=$WIPE_HDD,$dev
            else
                ilog "WIPE_HDD=$dev"
                WIPE_HDD=$dev
            fi
        fi
    done
    ilog "Not in upgrade"
fi

ilog "==========="
ilog "WIPE DISKs: ${WIPE_HDD}"
ilog "==========="
inst_dev=$(get_disk "${INSTDEV}")
for dev in ${WIPE_HDD//,/ } ; do
    ilog "Wiping $dev"

    # Clear previous GPT tables or LVM data on each disk.
    #
    # Rule: Exclude the persistent 'Platform backup' partition.
    # Note: Delete the first few bytes at the start and end of the partition.
    #       This is required with GPT partitions because they save partition
    #       info at both the start and the end of the block.
    # Get a list of partitions for this disk
    part_numbers=( $(parted -s $dev print | awk '$1 == "Number" {i=1; next}; i {print $1}') )

    # For each device partition apply wipe rules
    for part_number in "${part_numbers[@]}"; do
        sgdisk_part_info=$(sgdisk -i $part_number $dev)
        part_name=$(echo "$sgdisk_part_info" | grep "$part_type_name_str" | awk '{print $3;}')

        # special handling for the install device
        if [ "${dev}" == "${inst_dev}" ] ; then

            # Skip over the bios, efi and boot partitions that got us here.
            # LAT handles these partitions
            case ${part_name} in
                "'bios'" | "'otaefi'" | "'otaboot'" | "'otaboot_b'")
                    ilog "skipping ${part_name} on partition ${part_number} of device ${dev}"
                    continue
                ;;
                *)
                    dlog "wipe candidate ${part_name} on partition ${part_number} of device ${dev}"
                ;;
            esac
        fi

        part=$(get_part_prefix "${dev}")$part_number
        if [ "${controller}" = true ] ; then
            # Skip if we already found a valid partition, look otherwise
            [ ${BACKUP_PART_FOUND} -eq 1 ] && continue

            ilog "Looking for platform-backup partition on $part from ... instdev=${INSTDEV} device=${inst_dev} persistent_device=${persistent_instdev}"
            sgdisk_part_info=$(sgdisk -i $part_number $dev)
            part_type_guid=$(echo "$sgdisk_part_info" | grep "$part_type_guid_str" | awk '{print $4;}')
            dlog "Examining part_number=${part_number}, by_dev=${by_dev}, dev=${dev}, part_type_guid: ${part_type_guid}"
            dlog "sgdisk_part_info: ${sgdisk_part_info}"
            dlog "BACKUP_PART_GUID: ${BACKUP_PART_GUID}"
            if [ "$dev" == "${inst_dev}" -a "$part_type_guid" == $BACKUP_PART_GUID ] ; then
                part_type_name=$(echo "$sgdisk_part_info" | grep "$part_type_name_str" | awk '{print $3,$4;}')
                BACKUP_PART_NAME=${part_type_name:1:-1}

                part_type_first=$(echo "$sgdisk_part_info" | grep "$part_type_first_str" | awk '{print $3;}')
                BACKUP_PART_FIRST=${part_type_first}

                part_type_end=$(echo "$sgdisk_part_info" | grep "$part_type_end_str" | awk '{print $3;}')
                BACKUP_PART_END=${part_type_end}

                part_type_size=$(echo "$sgdisk_part_info" | grep "$part_type_size_str" | awk '{print $3;}')
                BACKUP_PART_SIZE=${part_type_size}

                part_type_flags=$(echo "$sgdisk_part_info" | grep "$part_type_flags_str" | awk '{print $3;}')
                BACKUP_PART_FLAGS=${part_type_flags}

                ilog "Discovered persistent backup partition: ${part} [${BACKUP_PART_NAME}:${BACKUP_PART_FIRST}:${BACKUP_PART_END}:${BACKUP_PART_SIZE}:${part_type_guid}]"

                # Only keep a backup partition that is in the expected location
                # and contains a proper filesystem
                if [ "${part_number}" == "${BACKUP_PART_NO}" ] ; then
                    part_fstype=$(exec_retry 5 0.5 "blkid -s TYPE -o value $part")
                    if [ "${part_fstype}" == "ext4" ]; then
                        BACKUP_PART_CURRENT_SIZE=$(parted -s ${part} unit MiB print | grep ${part} | awk '{print $3}' | sed 's/[^C0-9]*//g')
                        BACKUP_PART_FOUND=1
                        ilog "Discovered persistent backup partition, ${part} [${BACKUP_PART_CURRENT_SIZE} MiB], is in the expected location and is formatted correctly. Maintaining..."
                        continue
                    else
                        ilog "Discovered persistent backup partition, ${part}, has a missing 'ext4' filesystem . Recreating..."
                    fi
                else
                    # Make sure we only recreate the backup partition on systems that are
                    # known to be invalid. Detect a potential switch in BIOS vs. UEFI and
                    # exit with an appropriate message.
                    ilog "Discovered persistent backup partition, ${part}, is in an unexpected location. Expected on partition ${BACKUP_PART_NO}."
                    if [ "$USE_UEFI_PARTITIONS" = 0 ] ; then
                        # BIOS boot...
                        if [ "${part_number}" == "${BACKUP_PART_UEFI}" ] ; then
                            # Found a UEFI location for platform backup
                            report_failure_with_msg "BIOS booted system has a persistent backup partition in a UEFI expected location. Wipe disks or boot system in UEFI mode."
                        else
                            ilog "BIOS booted system has an invalid installation. Recreating "
                        fi
                    else
                        # UEFI boot...
                        if [ "${part_number}" == "${BACKUP_PART_BIOS}" ] ; then
                            # Found a BIOS location for platform backup
                            report_failure_with_msg "UEFI booted system has a persistent backup partition in a BIOS expected location. Wipe disks or boot system in BIOS mode."
                        else
                            ilog "UEFI booted system has an invalid installation. Recreating "
                        fi
                    fi
                fi
            fi
        fi

        if [ "${WIPE_CEPH_OSDS}" = "true" ] && ([ "${part_type_guid}" = "${CEPH_JOURNAL_GUID}" ] || [ "${part_type_guid}" = "${CEPH_MPATH_JOURNAL_GUID}" ]); then
            # Journal partitions require additional wiping. Based on the ceph-manage-journal.py
            # script in the integ repo (at the ceph/ceph/files/ceph-manage-journal.py location)
            # wiping 100MB of data at the beginning of the partition should be enough. We also
            # wipe 100MB at the end, just to be safe.
            ilog "Wiping Ceph ${part_name} on ${part} start and end with dd"
            dd if=/dev/zero of=$part bs=1M count=100 2>/dev/null
            dd if=/dev/zero of=$part bs=1M count=100 seek=$(( `blockdev --getsz $part` / (1024 * 2) - 100 )) 2>/dev/null
        else
            ilog "Wiping ${part_name} on ${part} start and end with dd"
            dd if=/dev/zero of=$part bs=512 count=34 2>/dev/null
            dd if=/dev/zero of=$part bs=512 count=34 seek=$((`blockdev --getsz $part` - 34)) 2>/dev/null
        fi
    done

    if [ ${BACKUP_PART_FOUND} -eq 0 -o "${dev}" != "${inst_dev}" ] ; then
        ilog "Creating disk label for $dev"
        parted -s $dev mktable gpt
        ilog "... done"
    fi
done

ilog "Ensure any LAT installer root/boot partitions are zapped/wiped"
for oldrootlabel in otaroot otaroot_1 otaroot_b otaroot_b_1 ; do
    oldrootpart=$(blkid --label $oldrootlabel)
    [ -z "$oldrootpart" ] && continue

    oldinstdev=/dev/$(lsblk $oldrootpart -n -o pkname)
    ilog "... destroying ${oldrootpart} on ${oldinstdev}"

    # sgdisk - Command-line GUID partition table (GPT) manipulator
    # Zap the entire partition
    ilog "... zapping ${oldinstdev}"
    sgdisk -Zo ${oldinstdev}

    # partprobe - inform the OS of partition table changes
    # root@(none):/# partprobe /dev/sda -s
    # /dev/sda: gpt partitions 1 2 3 4 5 6
    ilog "... probing ${oldinstdev}"
    partprobe  ${oldinstdev}

    # wipefs - wipe a signature from a device
    ilog "... wiping  ${oldinstdev}"
    wipefs --all --backup ${oldinstdev}
done

# Override installer variable to not prompt for erasing the disk
export INSTW=0

# If multi-drivers-switch= is in boot parameters then we need to revert the
# kernel modules to the legacy version. This is a workaround for the LAT
# /install script not supporting multi-drivers-switch
driver_version=
if grep -s -q '\smulti-drivers-switch=' /proc/cmdline ; then
    for arg in $(cat /proc/cmdline); do
        case "${arg}" in
            multi-drivers-switch=*)
                driver_version=${arg##*=}
                break
                ;;
        esac
    done
    # Only proceed if we have a valid driver_version
    if [ -n "${driver_version}" ] && \
        [ -f "/lib/modules/$(uname -r)/extra/ice-${driver_version}/ice.ko" ] && \
        [ -f "/lib/modules/$(uname -r)/extra/i40e-${driver_version}/i40e.ko" ] && \
        [ -f "/lib/modules/$(uname -r)/extra/iavf-${driver_version}/iavf.ko" ]; then
        ilog "Found multi-drivers-switch: replacing ice/i40e/iavf with driver_version='${driver_version}'"
        modprobe -r ice
        modprobe -r i40e
        modprobe -r iavf
        sleep 2
        insmod "/lib/modules/$(uname -r)/extra/ice-${driver_version}/ice.ko"
        insmod "/lib/modules/$(uname -r)/extra/i40e-${driver_version}/i40e.ko"
        insmod "/lib/modules/$(uname -r)/extra/iavf-${driver_version}/iavf.ko"
        sleep 2
        ilog "Finished multi-drivers-switch module replacement"
    else
        elog "Found multi-drivers-switch but no modules exist for driver_version='${driver_version}' (ignoring)"
    fi
fi

ilog "Setting up initial IP address for ostree pull"
parse_miniboot_network_params

mgmt_dev=${BOOTPARAM_IFNAME}
mgmt_vlan=${BOOTPARAM_VLAN}
mgmt_address_family=${BOOTPARAM_MGMT_ADDRESS_FAMILY}

if [ -z "${mgmt_vlan}" ] ; then
    # NO VLAN
    if [ "$mgmt_address_family" = "inet" ]; then
        ilog "ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR}/${BOOTPARAM_PREFIX_LEN} dev ${mgmt_dev}"
        ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR}/${BOOTPARAM_PREFIX_LEN} dev ${mgmt_dev}
    else
        # BOOTPARAM_PREFIX_LEN should not be empty, but guard against it:
        if [ -z "${BOOTPARAM_PREFIX_LEN}" ]; then
            ilog "ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR} dev ${mgmt_dev}"
            ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR} dev ${mgmt_dev}
        else
            ilog "ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR}/${BOOTPARAM_PREFIX_LEN} dev ${mgmt_dev}"
            ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR}/${BOOTPARAM_PREFIX_LEN} dev ${mgmt_dev}
        fi
    fi
    ilog "ip ${BOOTPARAM_IP_VER} link set dev ${mgmt_dev} up"
    ip ${BOOTPARAM_IP_VER} link set dev ${mgmt_dev} up

    if [ -z "${BOOTPARAM_GW}" ]; then
        # No gateway
        ilog "ip ${BOOTPARAM_IP_VER} route add default dev ${mgmt_dev} ${BOOTPARAM_METRIC}"
        ip ${BOOTPARAM_IP_VER} route add default dev ${mgmt_dev} ${BOOTPARAM_METRIC}
    else
        ilog "Setting up default route:"
        ilog "ip ${BOOTPARAM_IP_VER} route add default via ${BOOTPARAM_GW} dev ${mgmt_dev} ${BOOTPARAM_METRIC}"
        ip ${BOOTPARAM_IP_VER} route add default via ${BOOTPARAM_GW} dev ${mgmt_dev} ${BOOTPARAM_METRIC}
    fi
    wait_for_interface ${mgmt_dev} 60
    ilog "ip addr:"
    ip addr show
    ilog "ip route:"
    ip ${BOOTPARAM_IP_VER} route show

else
    # VLAN CONFIG
    mgmt_iface=vlan${mgmt_vlan}
    ilog "mgmt_dev=${mgmt_dev}"
    ilog "mgmt_iface=vlan${mgmt_vlan}"
    ilog "mgmt_address_family: ${mgmt_address_family}"

    ilog "ip ${BOOTPARAM_IP_VER} link add link ${mgmt_dev} name $mgmt_iface type vlan id ${mgmt_vlan}"
    ip ${BOOTPARAM_IP_VER} link add link ${mgmt_dev} name $mgmt_iface type vlan id ${mgmt_vlan}

    if [ "${mgmt_address_family}" = "inet" ]; then
        ilog "ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR}/${BOOTPARAM_PREFIX_LEN} dev ${mgmt_iface}"
        ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR}/${BOOTPARAM_PREFIX_LEN} dev ${mgmt_iface}
    else
        # BOOTPARAM_PREFIX_LEN should not be empty, but guard against it:
        if [ -z "${BOOTPARAM_PREFIX_LEN}" ]; then
            ilog "ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR} dev ${mgmt_iface}"
            ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR} dev ${mgmt_iface}
        else
            ilog "ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR}/${BOOTPARAM_PREFIX_LEN} dev ${mgmt_iface}"
            ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR}/${BOOTPARAM_PREFIX_LEN} dev ${mgmt_iface}
        fi
    fi
    ilog "ip ${BOOTPARAM_IP_VER} link set up dev ${mgmt_dev}"
    ip ${BOOTPARAM_IP_VER} link set up dev ${mgmt_dev}
    wait_for_interface ${mgmt_dev} 60
    ilog "ip ${BOOTPARAM_IP_VER} link set up dev ${mgmt_iface}"
    ip ${BOOTPARAM_IP_VER} link set up dev ${mgmt_iface}
    wait_for_interface ${mgmt_iface} 60

    if [ -z "${BOOTPARAM_GW}" ]; then
        # No gateway
        ilog "ip ${BOOTPARAM_IP_VER} route add default dev ${mgmt_iface} ${BOOTPARAM_METRIC}"
        ip ${BOOTPARAM_IP_VER} route add default dev ${mgmt_iface} ${BOOTPARAM_METRIC}
    else
        ilog "Setting up default route:"
        ilog "ip ${BOOTPARAM_IP_VER} route add default via ${BOOTPARAM_GW} dev ${mgmt_iface} ${BOOTPARAM_METRIC}"
        ip ${BOOTPARAM_IP_VER} route add default via ${BOOTPARAM_GW} dev ${mgmt_iface} ${BOOTPARAM_METRIC}
    fi

    ilog "ip ${BOOTPARAM_IP_VER} addr:"
    ip ${BOOTPARAM_IP_VER} addr show
    ilog "ip ${BOOTPARAM_IP_VER} route:"
    ip ${BOOTPARAM_IP_VER} route show
fi

# get the nameserver
local dns="none"
for e in \${dns}; do
    echo "nameserver \${e}" > /etc/resolv.conf
done

true
%end

###########################################################################

%part --interpreter=/bin/bash
HOOK_LABEL="    part"
. /tmp/lat/ks_functions.sh
ilog "*****************************************"
ilog "***    Partition - Partition Disks    ***"
ilog "*****************************************"

inst_dev=$(get_disk "${INSTDEV}")

###########################################################
# From pre_disk_controller.cfg
###########################################################

function check_partitioning_status() {
    start_sec=$(($end_sec+1))
    part_no=$((part_no+1))
    if [ $start_sec -gt $last ] ; then
        report_failure_with_msg "Disk is not big enough for requested layout (start_sec: $start_sec, last: $last)"
    fi
}

if [ "$BIOSPLUSEFI" = 1 ] ; then
    ilog "BIOSPLUSEFI=1 configuration is requested"
    if [ "${controller}" = true -a "$USE_UEFI_PARTITIONS" = 1 ] ; then
        ilog "WARNING: UEFI booted and installed controllers will NOT have a BIOS MBR partition due to partitioning patterns established in previous releases."
    fi
fi

MIB_BYTES=$((1024*1024))

# Start common partitioning regardless of personality
sgdisk_parts=""

# Get the logical sector size used for determining partition boundaries
LOGICAL_SECTOR_SZ=`lsblk -n ${inst_dev} -o LOG-SEC -d`

# Zap the GPT/MBR information
sgdisk -Z ${inst_dev}

# Get the first aligned sector
first=`sgdisk -F ${inst_dev} | grep -v Creating`

# Get the last aligned sector
export last=$(sgdisk -E ${inst_dev} 2>/dev/null |grep -v Creating)

ilog "Allocate host partitions on ${inst_dev} with first sector: $first and last sector: $last"

# Maintain BIOS partition mappings from previous releases
start_sec=$first
part_no=1
if [ "$USE_UEFI_PARTITIONS" = 0 -o "${controller}" = false ] ; then
    # 1MB size for BIOS boot partition
    BIOSSZ=1
    end_sec=$(($start_sec+(${BIOSSZ}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
    sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:bios -t $part_no:EF02"
    check_partitioning_status
fi

if [ "${controller}" = true ] ; then
    if [ "${aio}" = true ] ; then
        get_aio_controller_provisioning_sizes
        ilog "AIO Controller: MINIMIZING root disk space allocation"
    else
        get_std_controller_provisioning_sizes
        ilog "STD Controller: MAXIMIZING root disk space allocation"
    fi

    # Only controllers have a persistent backup partition
    # Use current partition size if it has been detected
    if [ ${BACKUP_PART_CURRENT_SIZE} -gt 0 ]; then
        BACKUP_SIZE=${BACKUP_PART_CURRENT_SIZE}
    else
        BACKUP_SIZE=${BACKUP_DEFAULT_PERSISTENT_SIZE}
    fi
    export BACKUP_SIZE

    # Check for a bootline override and allocate platform backup partition
    if [ -z "$persistent_size" ]; then
        # Default backup partition size in MiB
        ilog "Platform Backup persistent size not on command line ; defaulting to ${BACKUP_SIZE}"
    else
        ilog "Using Platform Backup persistent size from boot command: ${persistent_size}"
        BACKUP_SIZE=${persistent_size}
    fi
    backup_part_extension_required=0
    if [ ${BACKUP_PART_CURRENT_SIZE} -gt 0 ]; then
        # Reconcile current backup partition size against BACKUP_SIZE
        if [ ${BACKUP_SIZE} -eq ${BACKUP_PART_CURRENT_SIZE} ] ; then
            ilog "Platform Backup partition size is unchanged: ${BACKUP_SIZE} MiB."
        elif [ ${BACKUP_SIZE} -gt ${BACKUP_PART_CURRENT_SIZE} ] ; then
            # We need to extend the existing partition - this is done after the partitions are recreated
            backup_part_extension_required=1
        else
            # Do not allow shrinking of backup partition
            report_failure_with_msg "Cannot shrink platform backup smaller than existing ${BACKUP_PART_CURRENT_SIZE} MiB"
        fi
    fi
    ilog "Platform Backup partition size: ${BACKUP_SIZE}"

    if [ ${BACKUP_PART_FOUND} -eq 0 ] ; then
        ilog "Platform Backup partition not detected: CREATING"
    else
        ilog "Platform Backup Partition was detected: PERSISTING"
    fi
    dlog "BACKUP_SIZE=${BACKUP_SIZE} after persistent_size=${persistent_size}, backup_part_extension_required=${backup_part_extension_required}"

    end_sec=$(($start_sec+(${BACKUP_SIZE}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
    sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:${BACKUP_PART_LABEL} -t $part_no:${BACKUP_PART_GUID}"
    check_partitioning_status

elif [ "${worker}" = true ] ; then
    ilog "Setting up platform_pv partition sizes for worker node"
    get_worker_provisioning_sizes
elif [ "${storage}" = true ] ; then
    ilog "Setting up platform_pv partition sizes for storage node"
    get_storage_provisioning_sizes
fi

ilog "PART_SZ_EFI               : ${PART_SZ_EFI}"
ilog "PART_SZ_BOOT              : ${PART_SZ_BOOT}"
ilog "PART_SZ_ROOT              : ${PART_SZ_ROOT}"

# 300 MiB size for EFI boot partition to align with previous releases
end_sec=$(($start_sec+(${PART_SZ_EFI}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:otaefi -t $part_no:EF00"
check_partitioning_status

# Boot/Root OSTree Partition A (Note: OSTree Partition B not used)
if [ "${PART_SZ_BOOT}" != 0 ] ; then
    end_sec=$(($start_sec+(${PART_SZ_BOOT}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
    sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:otaboot"
    check_partitioning_status
fi

if [ "${PART_SZ_ROOT}" != 0 ] ; then
    if [ "$INSTAB" = 0 -a "${INSTFLUX}" = 0 ] ; then
        if [ "$VSZ" = 0 ] ; then
            report_failure_with_msg "Installation with VSZ=0 is not supported."
        else
            end_sec=$(($start_sec+(${PART_SZ_ROOT}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
        fi
        sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:otaroot"
    else
        end_sec=$(($start_sec+(${PART_SZ_ROOT}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
        sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:otaroot"
    fi
    check_partitioning_status
fi

# Flux Partition
if [ "${LV_SZ_VAR}" = 0 -a "${INSTFLUX}" = 1 ] ; then
    if [ "$VSZ" = 0 ] ; then
        report_failure_with_msg "Installation with VSZ=0 is not supported."
    else
        end_sec=$(($start_sec+(${VSZ}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
    fi
    sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:fluxdata"
    check_partitioning_status
fi

# Allocate platform pv
ilog "platform_pv partition - using all remaining disk space"
end_sec=$last
sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:platform_pv -t $part_no:8E00"

STOR_DEVS=$(echo "$STOR_DEVS" | xargs -n 1 | sort -u | xargs)
[ -z "$STOR_DEVS" ] && report_failure_with_msg "No storage devices available."
ilog "STOR_DEV_FDS Updated ; $STOR_DEV_FDS"

# CREATE PARTITIONS
dlog "Requesting ${inst_dev} Partition Table: ${a}"
dlog "Executing: sgdisk ${sgdisk_parts} -p ${inst_dev}"
sgdisk $sgdisk_parts -p ${inst_dev}
rc=$?
[ ${rc} -ne 0 ] && report_failure_with_msg "sgdisk failed to create partitions: ${a} [rc=${rc}]"

if [ "${backup_part_extension_required}" -ne 0 ]; then
    instdev_part_prefix=$(get_part_prefix "${inst_dev}")
    # The backup partition has been increased via persistent_size.
    # Extend the partition and resize the FS
    wlog "Platform Backup partition: resizing ${instdev_part_prefix}${BACKUP_PART_NO} from ${BACKUP_PART_CURRENT_SIZE}MiB to ${BACKUP_SIZE}MiB"
    e2fsck -p -f ${instdev_part_prefix}${BACKUP_PART_NO}
    rc=$?
    # Handle e2fsck exit code, non-zero can still indicate success:
    # 0 - No errors
    # 1 - File system errors corrected
    # 2 - File system errors corrected, system should be rebooted
    # > 2 are all hard failures (see man e2fsck)
    # Include 2 as a failure in our case, since it should only happen if the filesystem
    # is mounted while e2fsck is run (not a valid scenario here).
    [ ${rc} -gt 1 ] && report_failure_with_msg "e2fsck failed on platform backup partition [rc=${rc}]"
    resize2fs -f ${instdev_part_prefix}${BACKUP_PART_NO}
    rc=$?
    [ ${rc} -ne 0 ] && report_failure_with_msg "Failed to resize ext4 fs of platform backup partition [rc=${rc}]"
fi
true
%end

###########################################################################

%mkfs --interpreter=/bin/bash
HOOK_LABEL="mkfs"
. /tmp/lat/ks_functions.sh
ilog "***************************************************"
ilog "***    Mkfs - Format Partitions & LVM Volumes   ***"
ilog "***************************************************"

#######################################################
# From pre_disk_aio
######################################################

vg="volume group"
lv="logical volume"
dev=$(get_disk "${INSTDEV}")
dev_part_prefix=$(get_part_prefix "${dev}")

if [ "${controller}" = true ] ; then
    if [ "${aio}" = true ] ; then
        get_aio_controller_provisioning_sizes
    else
        get_std_controller_provisioning_sizes
    fi
else
    report_failure_with_msg "Unsupported install type: only Standard or All-in-one is supported"
fi

# Maintain BIOS partition mappings from previous releases
part_no=1
if [ "$USE_UEFI_PARTITIONS" = 0 -o "${controller}" = false ] ; then
    # No formating for the BIOS boot partition
    part_no=$((part_no+1))
fi

if [ "${controller}" = true ] ; then
    ilog "BACKUP_SIZE              : ${BACKUP_SIZE}"
    ilog "BACKUP_PART_NO           : ${BACKUP_PART_NO}"
    ilog "BACKUP_PART_LABEL        : ${BACKUP_PART_LABEL}"
    ilog "BACKUP_PART_GUID         : ${BACKUP_PART_GUID}"
    ilog "BACKUP_PART              : ${dev_part_prefix}${BACKUP_PART_NO}"

    # Only init Platform Backup partition filesystem if the partition was just created
    if [ ${BACKUP_PART_FOUND} -eq 0 ] ; then
        ilog "Platform Backup Partition was CREATED. Initialize filesystem on ${dev_part_prefix}${BACKUP_PART_NO}"
        mkfs.ext4 -F -L ${BACKUP_PART_LABEL} ${dev_part_prefix}${BACKUP_PART_NO}
        [ ${?} -ne 0 ] && report_failure_with_msg "Failed Platform Backup partition filesystem init ${dev_part_prefix}${BACKUP_PART_NO}"
    else
        # Preserving the contents of the backup partition, but make sure it's labeled correctly
        e2label ${dev_part_prefix}${BACKUP_PART_NO} ${BACKUP_PART_LABEL}
    fi
    part_no=$((part_no+1))
fi

# Maintain UEFI partition mappings from previous releases
mkfs.vfat -n otaefi ${dev_part_prefix}${part_no}
[ ${?} -ne 0 ] && report_failure_with_msg "Failed UEFI filesystem init: ${dev_part_prefix}${part_no}, rc=${?}"
part_no=$((part_no+1))

# Boot/Root OSTree Partition A (Note: OSTree Partition B not used)
if [ "${PART_SZ_BOOT}" != 0 ] ; then
    mkfs.ext4 -F -L otaboot ${dev_part_prefix}${part_no}
    [ ${?} -ne 0 ] && report_failure_with_msg "Failed Boot filesystem init: ${dev_part_prefix}${part_no}, rc=${?}"
    part_no=$((part_no+1))
fi

if [ "${PART_SZ_ROOT}" != 0 ] ; then
   mkfs.ext4 -F -L otaroot ${dev_part_prefix}${part_no}
   [ ${?} -ne 0 ] && report_failure_with_msg "Failed Root filesystem init: ${dev_part_prefix}${part_no}, rc=${?}"
    part_no=$((part_no+1))
fi

# Flux Partition
if [ "${LV_SZ_VAR}" = 0 -a "${INSTFLUX}" = 1 ] ; then
    mkfs.ext4 -F -L fluxdata ${dev_part_prefix}${part_no}
    [ ${?} -ne 0 ] && report_failure_with_msg "Failed Fluxdata (/var) filesystem init: ${dev_part_prefix}${part_no}, rc=${?}"
    part_no=$((part_no+1))
fi

# Log important LVM config settings
log_lvm_conf "Installer Initial" /etc/lvm/lvm.conf

# Create Volume Group
pv_part=${dev_part_prefix}${part_no}

ilog "Install disk: ${INSTDEV}"
ilog "Current disk: ${dev} ; current partition index: $part_no"
ilog "LV_SZ_LOG     (cgts--vg-log--lv size): ${LV_SZ_LOG} MB"
ilog "LV_SZ_ROOT    (cgts--vg-root--lv)    : ${LV_SZ_ROOT} MB"
ilog "LV_SZ_SCRATCH (cgts--vg-scratch--lv) : ${LV_SZ_SCRATCH} MB"
ilog "LV_SZ_VAR     (cgts--vg-var--lv)     : ${LV_SZ_VAR} MB"

ilog "Wipe any previous signatures from the platform physical volume ${pv_part}"
wipefs -a ${pv_part}
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to wipe signatures from ${pv_part}, rc=${?}"

ilog "Create ${vg} 'cgts-vg' ${pv_part} ; $STOR_DEV_FDS"
exec_no_fds "$STOR_DEV_FDS" "vgcreate -y --force cgts-vg ${pv_part} 2>/dev/null" 5 0.5
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${vg} 'cgts-vg' ${pv_part}"

if [ "${LV_SZ_ROOT}" != 0 ] ; then
   # Create and Init the '/' logical volume
   ilog "Create ${lv} 'root-lv' ; $STOR_DEV_FDS"
   exec_no_fds "$STOR_DEV_FDS" "lvcreate -y -Wy -Zy -n root-lv --size ${LV_SZ_ROOT}MB cgts-vg 2>/dev/null" 5 0.5
   [ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${lv} 'root-lv'"

   ilog "InitFs ${lv} 'root-lv'"
   mkfs.ext4 -F /dev/cgts-vg/root-lv
   [ ${?} -ne 0 ] && report_failure_with_msg "Failed to init ${lv} 'root-lv'"
fi

if [ "${LV_SZ_VAR}" != 0 ] ; then
   # Create and Init the '/' logical volume
   ilog "Create ${lv} 'var-lv' ; $STOR_DEV_FDS"
   exec_no_fds "$STOR_DEV_FDS" "lvcreate -y -Wy -Zy -n var-lv --size ${LV_SZ_ROOT}MB cgts-vg 2>/dev/null" 5 0.5
   [ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${lv} 'root-lv'"

   ilog "InitFs ${lv} 'var-lv'"
   mkfs.ext4 -F /dev/cgts-vg/var-lv
   [ ${?} -ne 0 ] && report_failure_with_msg "Failed to init ${lv} 'root-lv'"
fi

# Create and Init the '/var/log' logical volume
ilog "Create ${lv} 'log-lv' ; $STOR_DEV_FDS"
exec_no_fds "$STOR_DEV_FDS" "lvcreate -y -Wy -Zy -n log-lv --size ${LV_SZ_LOG}MB cgts-vg 2>/dev/null" 5 0.5
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${lv} 'log-lv'"

ilog "InitFs ${lv} 'log-lv'"
mkfs.ext4 -F /dev/cgts-vg/log-lv
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to init ${lv} 'log-lv'"

# Create and init the '/scratch' logical volume
ilog "Create ${lv} 'scratch-lv' ; $STOR_DEV_FDS"
exec_no_fds "$STOR_DEV_FDS" "lvcreate -y -Wy -Zy -n scratch-lv --size ${LV_SZ_SCRATCH}MB cgts-vg 2>/dev/null" 5 0.5
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${lv} 'scratch-lv'"

ilog "InitFs ${lv} 'scratch-lv'"
mkfs.ext4 -F /dev/cgts-vg/scratch-lv
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to init ${lv} 'scratch-lv'"

#######################################################################
# From post_lvm_on_rootfs.cfg  (all hosts)
#######################################################################

# uncomment the global_filter line in lvm.conf
perl -0777 -i.bak -pe 's:(# This configuration option has an automatic default value\.\n)\t# global_filter:$1        global_filter:m' /etc/lvm/lvm.conf
perl -0777 -i -pe 's:(# Example\n)\t# preferred_names:$1        preferred_names:m' /etc/lvm/lvm.conf

# Get the LVM disk partition and add it to the lvm.conf file
export LV_ROOTDISK=$(exec_no_fds "$STOR_DEV_FDS" "pvdisplay --select 'vg_name=cgts-vg' -C -o pv_name --noheadings" | xargs)
[ -z ${LV_ROOTDISK} ] && report_failure_with_msg "Failed to identify logical volume rootdisk via pvdisplay"

# Edit the LVM config so LVM only looks for LVs on ${LV_ROOTDISK}
ilog "Edit the LVM config so LVM only looks for LVs on the root disk"
sed -i "s#^\( *\)global_filter = \[.*#\1global_filter = [ \"a|${LV_ROOTDISK}|\", \"r|.*|\" ]#" /etc/lvm/lvm.conf

# Log important LVM config settings
log_lvm_conf "Installer Updated" /etc/lvm/lvm.conf

#####################################################################
# From pre_disk_setup_tail.cfg
#####################################################################

# Close all FDs and wait for udev to reshuffle all partitions.
ilog "Releasing storage device locks and FDs."
for fd in $STOR_DEV_FDS
do
    flock -u "$fd"
    exec {fd}>&-
done
sleep 2
udevadm settle --timeout=300 || report_failure_with_msg "udevadm settle failed"

#lsblk -o name,mountpoint,label,size,uuid

# Rescan LVM cache to avoid warnings for VGs that were recreated.
pvscan --cache 2>/dev/null

# Stage the ostree_repo in /sysroot for network installations
# of controller nodes. Doing so avoids a double ostree pull of
# the huge ostree_repo over the network.
if is_usb_install -eq 0 ; then

    ilog "USB Install"

else

    ilog "Network Install"

    ##################################################################
    #
    # System node installs of worker and storage nodes are installed
    # over the network rather than from a staged archive.
    # This is because these node types do not have/need a local feed.
    #
    ##################################################################

    if [ "${controller}" = true ] ; then

        ilog "Controller Install"

        ##############################################################
        #
        # Controller node network installs pull the ostree_repo from
        # the pxeboot server's feed directory in 'archive' mode into
        # /sysroot as a local staging location. In this case LAT's
        # INSTL (install) variable is updated to install from that
        # local stage.
        #
        # This is done to avoid a second (double) ostree_repo pull
        # over the network that would otherwise be needed to populate
        # the controller's feed directory.
        #
        # This staged ostree_repo archive is later moved to the
        # controller's feed directory to be used for future installs
        # of other system nodes from this controller.
        #
        ##############################################################

        ilog "OSTREE_ROOT_DEVICE: ${OSTREE_ROOT_DEVICE}"
        ilog "OSTREE_VAR_DEVICE : ${OSTREE_VAR_DEVICE}"

        PHYS_SYSROOT="/sysroot"
        mkdir -p ${PHYS_SYSROOT}
        mount -o rw,noatime "${OSTREE_ROOT_DEVICE}" "${PHYS_SYSROOT}" || elog "Error mounting ${OSTREE_ROOT_DEVICE}"

        repo="${PHYS_SYSROOT}/var/www/pages/feed/rel-xxxPLATFORM_RELEASExxx/ostree_repo"
        mkdir -p "${repo}"

        # If we have already prestaged ostree_repo in /opt/platform-backup,
        # then we should use that repo instead of downloading off of the system controller.

        backup_device=/dev/disk/by-partlabel/platform_backup
        backup_mount=/tmp/platform-backup
        backup_mount_release="${backup_mount}"/xxxPLATFORM_RELEASExxx

        ilog "Temporary backup mount: ${backup_mount}, release: ${backup_mount_release}"
        mkdir -p "${backup_mount}"
        mount "${backup_device}" "${backup_mount}" 2>/dev/null

        # If ostree_repo is found at the mounted backup directory,
        # then set the ostree url to its location.
        remote_insturl=
        if [ -e ${backup_mount_release}/ostree_repo ]; then
            local_repo_check_fail=
            # Calculate local checksum and compare
            checksum_file=${backup_mount_release}/.ostree_repo_checksum
            if [ -f "${checksum_file}" ]; then
                checksum_from_file=$(cat "${checksum_file}")
                ilog "Verifying checksum for prestaged ${backup_mount_release}/ostree_repo"
                pushd ${backup_mount_release} > /dev/null
                checksum=$(find ostree_repo -type f -exec md5sum {} + | LC_ALL=C sort | md5sum | awk '{ print $1; }')
                popd > /dev/null
                if [ "${checksum}" = "${checksum_from_file}" ]; then
                    ilog "Verified ostree checksum: ${checksum}"
                else
                    elog "ostree checksum failed on ${backup_mount_release}/ostree_repo"
                    elog "Calulated checksum: ${checksum}"
                    elog "File checksum:      ${checksum_from_file}"
                    local_repo_check_fail=true
                fi
            else
                # No prestage checksum file is available. Use ostree fsck instead.
                # The only problem with this is the length of time required for fsck to complete.
                wlog "No ostree checksum file at ${checksum_file}. Performing ostree fsck instead."
                if ! ostree --repo="${backup_mount_release}/ostree_repo" fsck; then
                    elog "ostree fsck failed on prestaged ${backup_mount_release}/ostree_repo: reverting to remote pull"
                    local_repo_check_fail=true
                fi
            fi
            if [ -z "${local_repo_check_fail}" ]; then
                # Preserve remote_insturl for use in 2nd ostree pull below
                remote_insturl=${insturl}

                insturl="file:///${backup_mount_release}/ostree_repo"
                ilog "Setting insturl to ${insturl} to use prestaged ostree_repo"
            else
                # Remove the corrupted ostree_repo.
                # Avoid setting insturl which will revert to using a remote pull
                elog "ostree integrity check failed: removing prestaged ${backup_mount_release}/ostree_repo"
                rm -rf "${backup_mount_release}/ostree_repo"
                elog "ostree integrity check failed: reverting to remote pull"
            fi
        fi

        # Tell LAT to install from this local stage
        # i.e. override where LAT installs from.
        export instl=${repo}
        export INSTL=${instl}

        ostree --repo=${repo} init --mode=archive
        if [ "${insturl}" = "file://NOT_SET" ] ; then
            ilog "ostree_repo archive pull from file:///instboot/ostree_repo"
            ostree --repo=${repo} remote add ${instbr} file:///instboot/ostree_repo
        else
            ilog "ostree_repo archive pull from ${insturl}"
            ostree --repo=${repo} remote add ${instbr} ${insturl}
        fi
        # Check for noverifyssl in boot arguments.
        # Note: even if noverifyssl is not set, we still don't have proper support
        # for SSL certificates (which would require configuring cert paths here).
        if grep -q noverifyssl /proc/cmdline 2>/dev/null; then
            ilog "Configuring ostree for unverified SSL"
            ostree config --repo=${repo} set "remote \"${instbr}\"".tls-permissive true
        fi
        # Check for instgpg=0 in boot arguments.
        if grep -q 'instgpg=0' /proc/cmdline 2>/dev/null; then
            ilog "Configuring ostree for unverified GPG (gpg-verify=false)"
            ostree config --repo=${repo} set "remote \"${instbr}\"".gpg-verify false
        fi

        ilog "Executing: ostree --repo=${repo} pull --depth=-1 --mirror ${instbr}:${instbr}"
        ostree --repo=${repo} pull --depth=-1 --mirror ${instbr}:${instbr}
        rc=$?
        if [ $rc -ne 0 ]; then
            report_failure_with_msg "ostree pull failed, rc=$rc"
        fi

        if [ -n "${remote_insturl}" ]; then
            # In this case, we've initialized our ostree repo from local disk
            # store - either via prestaging or due to installing from ISO.
            # We now perform an extra ostree pull from the system controller
            # in order to pick up any patch commits.
            ilog "ostree_repo archive pull from ${remote_insturl} for patch commits"

            # Set feed ostree remote "starlingx" to point to active controller's feed ostree repo
            ilog "Replacing ostree feed remote with: ${remote_insturl} ${instbr}"
            ostree --repo=${repo} remote delete ${instbr}
            ostree --repo=${repo} remote add ${instbr} ${remote_insturl} ${instbr}
            if grep -q noverifyssl /proc/cmdline 2>/dev/null; then
                ilog "Configuring ostree for unverified SSL"
                ostree config --repo=${repo} set "remote \"${instbr}\"".tls-permissive true
            fi
            if grep -q 'instgpg=0' /proc/cmdline 2>/dev/null; then
                ilog "Configuring ostree for unverified GPG (gpg-verify=false)"
                ostree config --repo=${repo} set "remote \"${instbr}\"".gpg-verify false
            fi
            ilog "Executing ostree pull from ${remote_insturl}:"
            ilog "ostree --repo=${repo} pull --depth=-1 --mirror ${instbr}:${instbr}"
            ostree --repo=${repo} pull --depth=-1 --mirror ${instbr}:${instbr}
            rc=$?
            if [ $rc -ne 0 ]; then
                report_failure_with_msg "ostree pull failed, rc=$rc"
            fi
        fi
        ilog "ostree log for ${repo}, branch=${instbr}:"
        ostree --repo=${repo} log ${instbr}

        umount ${backup_mount}
        umount ${PHYS_SYSROOT}
    fi
fi

# Important: To align with installer expectations of where otaefi will reside,
# reset the value of p1
if [ "${controller}" = true ] ; then
    if [ "$USE_UEFI_PARTITIONS" = 0 ] ; then
        # BIOS firmware execution
        #  Number  Start (sector)    End (sector)  Size       Code  Name
        #     1            2048            4095   1024.0 KiB  EF02  bios
        #     2            4096        61444095   29.3 GiB    FFFF  platform_backup
        #     3        61444096        62058495   300.0 MiB   EF00  otaefi
        #
        p1=3
    else
        # UEFI firmware execution
        #  Number  Start (sector)    End (sector)  Size       Code  Name
        #     1            2048        61442047   29.3 GiB    FFFF  platform_backup
        #     2        61442048        62056447   300.0 MiB   EF00  otaefi
        p1=2

        # LAT installer will attempt to write the legacy BIOS grub information
        # after exiting from this hook. Skip it, in this case, as we don't have
        # a BIOS boot partition
        export BIOSPLUSEFI=0
    fi
elif [ "${worker}" = true -o "${storage}" = true ] ; then
        # UEFI and BIOS firmware execution
        # Number  Start (sector)    End (sector)  Size       Code  Name
        #    1            2048            4095   1024.0 KiB  EF02  bios
        #    2            4096          618495   300.0 MiB   EF00  otaefi
        p1=2
fi

# Important: Set fs_dev needed by the installer for mounting/updating the efi
# partition
fs_dev=${dev_part_prefix}

true
%end

###########################################################################

%post --interpreter=/bin/bash
HOOK_LABEL="post"
. /tmp/lat/ks_functions.sh
ilog "*********************************************************"
ilog "****    Post - Add user/groups                         **"
ilog "*********************************************************"

# Set password for root to 'root'
usermod -p '$6$hEv/K.fPeg/$ezIWhJPrMG3WtdEwqQRdyBwdYmPZkqW2PONFAcDd6TqWliYc9dHAwW4MFTlLanVH3/clE0/34FheDMpbAqZVG.' root

# Remove admin user whether it exists or not
deluser admin || true

# Create the sysadmin user
useradd sysadmin -m --shell /bin/bash -G sudo --password 4SuW8cnXFyxsk
chage -d 0 sysadmin

# add 'nobody' group
groupadd nobody

# Reload /etc/group- to make systemd-sysusers.service happy
/usr/sbin/grpconv || report_failure_with_msg "Failed to convert from shadow passwords and groups"
%end

%post --interpreter=/bin/bash
HOOK_LABEL="post"
. /tmp/lat/ks_functions.sh
ilog "*********************************************************"
ilog "***    Post - Traits & Platform Config File update    ***"
ilog "*********************************************************"

# Set node traits' state
[ "${controller}" = true ] && ilog "Controller Function"
[ "${storage}" = true ] && ilog "Storage Function"
[ "${worker}" = true ] && ilog "Worker Function"
[ "${lowlatency}" = true ] && ilog "Low Latency Function"
[ "${controller}" = true -a ${worker} = true ] && aio=true

# Parse traits to nodetype, subfunction and system_type
# -----------------------------------------------------

# Set nodetype from traits
if [ "${controller}" = true ] ; then
    nodetype=${TRAIT__CONTROLLER}
elif [ "${storage}" = true ] ; then
    nodetype=${TRAIT__STORAGE}
elif [ "${worker}" = true ] ; then
    nodetype=${TRAIT__WORKER}
fi
ilog "nodetype=${nodetype}"

# Set system type and subfunction
subfunction=""
system_type=""
[ "${controller}" = true -a "${worker}" = true ] && aio=true
if [ "${aio}" = true ] ; then
    ilog "${SYSTEM_TYPE__AIO} System"
    system_type="${SYSTEM_TYPE__AIO}"
    subfunction="${SUBFUNCTION__AIO}"
    if [ "${lowlatency}" = true ] ; then
        ilog "Setting aio lowlatency"
        ln -s /usr/share/systemd-presets/lowlatency.preset /etc/systemd/system-preset/10-aio.preset
    else
        ln -s /usr/share/systemd-presets/aio.preset /etc/systemd/system-preset/10-aio.preset
    fi
else
    ilog "${SYSTEM_TYPE__STANDARD} System"
    system_type="${SYSTEM_TYPE__STANDARD}"
    if [ "${worker}" = true ] ; then
        subfunction=${SUBFUNCTION__WORKER}
        if [ "${lowlatency}" = true ] ; then
            ilog "Setting ${SUBFUNCTION__WORKER} lowlatency"
            ln -s /usr/share/systemd-presets/worker-lowlatency.preset /etc/systemd/system-preset/10-${SUBFUNCTION__WORKER}.preset
        else
            ln -s /usr/share/systemd-presets/worker.preset /etc/systemd/system-preset/10-${SUBFUNCTION__WORKER}.preset
        fi
    elif [ "${storage}" = true ] ; then
        subfunction=${SUBFUNCTION__STORAGE}
        ilog "Setting ${SUBFUNCTION__STORAGE} preset"
        ln -s /usr/share/systemd-presets/storage.preset /etc/systemd/system-preset/10-${SUBFUNCTION__STORAGE}.preset
    else
        subfunction=${SUBFUNCTION__CONTROLLER}
        ilog "Setting ${SUBFUNCTION__CONTROLLER} preset"
        ln -s /usr/share/systemd-presets/controller.preset /etc/systemd/system-preset/10-${SUBFUNCTION__CONTROLLER}.preset
    fi
fi

if [ "${lowlatency}" = true ] ; then
    subfunction="${subfunction},${TRAIT__LOWLATENCY}"
fi

ilog "subfunction=${subfunction}"
ilog "system_type=${system_type}"

#################################################################
# From post_platform_conf_controller.cfg
# From post_platform_conf_aio.cfg
# From post_platform_conf_aio_lowlatency.cfg
#################################################################

ilog "create platform.conf and set personality traits"
[ ! -d "/etc/platform" ] && mkdir -p -m 0775 /etc/platform
cat <<EOF > ${PLATFORM_CONF}
nodetype=${nodetype}
subfunction=${subfunction}
system_type=${system_type}
EOF

ilog "Create systemd presets and set personality traits"
systemctl daemon-reload
systemctl --preset-mode=full preset-all

##############################################################
# From post_pxeboot_controller
# From post_net_common.cfg
# ############################################################
# Set http port
# Persist the default http port number to platform configuration.
# This will get overwritten when by manifest during sw configuration phase.
if [[ "${insturl}" == *"http"* ]] ; then
    http_port=$(echo $(cat /proc/cmdline |xargs -n1 echo |grep '^insturl=' | sed -r 's#^[^/]*://[^/]*:([0-9]*)/.*#\1#'))
else
    http_port=8080
fi
update_platform_conf "http_port=${http_port}"

#############################################################
# From post_common.cfg   (all hosts)
#############################################################

rm /etc/hostname

# TODO: is this needed with LAT ??
# If using a serial install make sure to add a getty on the tty1
conarg=`cat /proc/cmdline |xargs -n1 echo |grep console= |grep ttyS`
if [ -n "$conarg" ] ; then
    echo "1:2345:respawn:/sbin/mingetty tty1" >> /etc/inittab
fi

blkid >> ${LOGFILE}

# TODO: See if other post_common.cfg content is needed

true
%end

###########################################################################

%post --interpreter=/bin/bash
HOOK_LABEL="post"
. /tmp/lat/ks_functions.sh
ilog "*************************************"
ilog "***    Post - Set Kernel Args     ***"
ilog "*************************************"

###########################################################
# From post_kernel_controller.cfg
# From post_kernel_aio_worker.cfg
###########################################################

. /etc/platform/platform.conf

# Prepare the disk boot kernel comand line
# ----------------------------------------
KERN_OPTS="${KERNEL_PARAMS}"
ilog "Building up KERN_OPTS: ${KERN_OPTS}"

function add_kernel_option()
{
    option="${1}"
    ilog "... adding: ${option}"

    # avoid adding leading space on first option
    if [ "${KERN_OPTS}" = "" ] ; then
        KERN_OPTS="${option}"
    else
        KERN_OPTS="${KERN_OPTS} ${option}"
    fi
}

# If the installer asked us to use security related kernel params, use
# them in the grub line as well (until they can be configured via puppet)
security_feature=""

# Handle security options
# TODO: Create a list and loop over it
security_options="nopti nospectre_v2 nospectre_v1"
for o in ${security_options}
do
    grep -q ${o} /proc/cmdline
    if [ $? -eq 0 ]; then
        add_kernel_option "${o}"
        if [ "${security_feature}" = "" ] ; then
            security_feature="${o}"
        else
            security_feature="${security_feature} ${o}"
        fi
    fi
done

[ "${KERN_OPTS}" != "" ] && ilog "Learned kernel params: ${KERN_OPTS}"

ilog "Adding kernel options"
if [ "${aio}" = true -o "${worker}" = true ] ; then

    if [ -e /etc/init.d/cpumap_functions.sh ] ; then

        # Update grub with custom kernel bootargs
        source /etc/init.d/cpumap_functions.sh

        n_cpus=$(cat /proc/cpuinfo 2>/dev/null | \
          awk '/^[pP]rocessor/ { n +=1 } END { print (n>0) ? n : 1}')
        ilog "cpumap: n_cpus:${n_cpus}"

        n_numa=$(ls -d /sys/devices/system/node/node* 2>/dev/null | wc -l)
        ilog "cpumap: n_numa:${n_numa}"

        KERN_OPTS="${KERN_OPTS} iommu=pt"
        KERN_OPTS="${KERN_OPTS} hugepagesz=2M hugepages=0 default_hugepagesz=2M"

        # If this is an all-in-one system, we need at least 4 CPUs
        if [ "${aio}" = true -a ${n_cpus} -lt 4 ]; then
            report_failure_with_msg "At least 4 CPUs are required for ${SYSTEM_TYPE__AIO} node."
        fi

        # Add kernel options for cpu isolation / affinity
        if [ ${n_cpus} -gt 1 ] ; then

            base_cpulist=$(platform_expanded_cpu_list)
            ilog "cpumap: base_cpulist: ${base_cpulist}"

            base_cpumap=$(cpulist_to_cpumap ${base_cpulist} ${n_cpus})
            ilog "cpumap: base_cpumap: ${base_cpumap}"

            avp_cpulist=$(vswitch_expanded_cpu_list)
            ilog "cpumap: avp_cpulist:${avp_cpulist}"
            if [ -e /etc/vswitch/vswitch.conf ] ; then
                # Update vswitch.conf
                sed -i "s/^VSWITCH_CPU_LIST=.*/VSWITCH_CPU_LIST=\"${avp_cpulist}\"/" /etc/vswitch/vswitch.conf
            else
                wlog "Missing /etc/vswitch/vswitch.conf ; update bypassed"
            fi

            norcu_cpumap=$(invert_cpumap ${base_cpumap} ${n_cpus})
            ilog "cpumap: norcu_cpumap:${norcu_cpumap}"

            norcu_cpulist=$(cpumap_to_cpulist ${norcu_cpumap} ${n_cpus})
            ilog "cpumap: norcu_cpulist:${norcu_cpulist}"

            if [ "${lowlatency}" = true ]; then
                KERN_OPTS="${KERN_OPTS} nohz_full=${norcu_cpulist}"
            fi

            KERN_OPTS="${KERN_OPTS} rcu_nocbs=${norcu_cpulist}"
            KERN_OPTS="${KERN_OPTS} kthread_cpus=${base_cpulist}"
            KERN_OPTS="${KERN_OPTS} irqaffinity=${norcu_cpulist}"
        fi
    else
        wlog "Missing /etc/init.d/cpumap_functions.sh ; cpumap setup bypassed"
    fi

    # Add kernel options to set NMI watchdog
    if [ "${lowlatency}" = true ] ; then
        add_kernel_option "nmi_watchdog=0 softlockup_panic=0"
    else
        add_kernel_option "nmi_watchdog=panic,1 softlockup_panic=1"
    fi

    if [[ "$(dmidecode -s system-product-name)" =~ ^ProLiant.*Gen8$ ]]; then
        add_kernel_option "intel_iommu=on,eth_no_rmrr"
    else
        add_kernel_option "intel_iommu=on"
    fi

    # Add kernel options to disable kvm-intel.eptad on Broadwell
    # Broadwell: Model: 79, Model name: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz
    if grep -q -E "^model\s+:\s+79$" /proc/cpuinfo
    then
        add_kernel_option "kvm-intel.eptad=0"
    fi

    # Add kernel option to avoid jiffies_lock contention on real-time kernel
    if [ "${lowlatency}" = true ] ; then
        add_kernel_option "skew_tick=1"
    fi

elif [ "${controller}" = true ] ; then

    ilog "Adding ${TRAIT__CONTROLLER} function kernel options"

    ## Custom kernel options
    add_kernel_option "intel_iommu=off usbcore.autosuspend=-1"

    ## Setup the loop module to support up to 15 partitions so that we
    ## can enable the customer to manually resize images if needed.
    ##
    add_kernel_option "loop.max_part=15"


    # Add kernel options to ensure NMI watchdog is enabled, if supported
    add_kernel_option "nmi_watchdog=panic,1 softlockup_panic=1"

elif [ "${storage}" = true ] ; then
    # We should never reach this code in miniboot:
    report_failure_with_msg "Unexpected: 'storage' type not supported in miniboot"
fi

#########################################################################################
# From post_kernel_aio_and_worker.cfg
# From post_kernel_controller.cfg
# From post_kernel_storage.cfg
#########################################################################################

# Add kernel options to ensure an selinux is disabled for all node types
add_kernel_option "selinux=0 enforcing=0"

# Add kernel option to panic on a softdog timeout
add_kernel_option "softdog.soft_panic=1"

# Make sure that we are using cgroups v1
add_kernel_option "systemd.unified_cgroup_hierarchy=0"

# k8s updates
add_kernel_option "user_namespace.enable=1"

# Add kernel option to disable biosdevname if enabled
# As this may already be in GRUB_CMDLINE_LINUX, only add if it is not already present
grep -q '^GRUB_CMDLINE_LINUX=.*biosdevname=0' /etc/default/grub
if [ $? -ne 0 ]; then
    add_kernel_option "biosdevname=0"
fi

if [ ! -z "${insthwsettle}" ]; then
    if [[ ${insthwsettle} =~ ^[0-9]+$ ]]; then
        add_kernel_option "hwsettle=${insthwsettle}"
    fi
fi

if [ -n "${extra_boot_params}" ]; then
    # Strip out any commas and replace with space.
    extra_boot_params=${extra_boot_params//,/ }  # replace all ',' with ' '
    ilog "Adding extra_boot_params to kernel options: ${extra_boot_params}"
    add_kernel_option "${extra_boot_params}"
fi

# Search the install kernel command line for the multi-drivers-switch=
# option and if present propagate that to the disk boot kernel options.
CMDLINE=`cat /proc/cmdline`
param="multi-drivers-switch"
for option in ${CMDLINE} ; do
    opt=${option%%=*}
    if [ "${param}" = "${opt}" ]; then
       add_kernel_option "${option}"
       break
    fi
done

########################################################################################

ilog "Adding these kernel params to disk boot: ${KERN_OPTS}"
if [ -n "${KERN_OPTS}" ] ; then
    grep -q "^kernel_params=" /boot/efi/EFI/BOOT/boot.env
    if [ ${?} -ne 0 ]; then
        # Add line
        sed -i "1 a kernel_params=${KERN_OPTS}" /boot/efi/EFI/BOOT/boot.env
    else
        # Update existing
        sed -i "s/^kernel_params=.*/kernel_params=${KERN_OPTS}/" /boot/efi/EFI/BOOT/boot.env
    fi
else
    wlog "no kernel options added"
fi

ilog "Override LAT grub file"
GRUB_PATH_N_FILE="/boot/efi/EFI/BOOT/grub.cfg"
if [ ! -e ${GRUB_PATH_N_FILE}.lat ] ; then
    mv ${GRUB_PATH_N_FILE} ${GRUB_PATH_N_FILE}.lat
    cp /var/pxeboot/pxelinux.cfg.files/grub.cfg.stx ${GRUB_PATH_N_FILE}
fi

######################################################################
# From post_system_aio
######################################################################
TEMPLATE_FILE="/usr/share/worker-utils/config/worker_reserved.conf"
TARGET_FILE="/etc/platform/worker_reserved.conf"
if [ "${aio}" = true ] ; then

    ## Reserve more memory for base processes since the controller has higher
    ## memory requirements but cap it to better handle systems with large
    ## amounts of memory
    TOTALMEM=$(grep MemTotal /proc/meminfo | awk '{print int($2/1024)}')
    ilog "${SYSTEM_TYPE__AIO} MemTotal:${TOTALMEM}"

    if [ -e /sys/devices/system/node/node0 ]; then
        RESERVEDMEM=$(grep MemTotal /sys/devices/system/node/node0/meminfo | awk '{printf "%d\n", $4/1024}')
    else
        RESERVEDMEM=$(grep MemTotal /proc/meminfo | awk '{print int($2/1024/4)}')
    fi

    if [ ${RESERVEDMEM} -lt 6144 ]; then
        RESERVEDMEM=6144
    elif [ ${RESERVEDMEM} -gt 14500 ]; then
        RESERVEDMEM=14500
    elif [ ${RESERVEDMEM} -gt 8192 ]; then
        RESERVEDMEM=8192
    fi

    # Normally we would set personality based files later
    # But we need to copy worker_reserved.conf now since it needs to be modified for AIO
    ilog "${SYSTEM_TYPE__AIO} Reserved Memory: ${RESERVEDMEM}"
    if [ ! -e "${TEMPLATE_FILE}" ] ; then
        report_failure_with_msg "Cannot configure worker cpu/memory ; missing ${TEMPLATE_FILE}"
    fi
    cp "${TEMPLATE_FILE}" "${TARGET_FILE}"
    if [ ! -e "${TARGET_FILE}" ] ; then
        report_failure_with_msg "Cannot configure worker cpu/memory ; missing ${TARGET_FILE}"
    fi
    sed -i -e "s#\(WORKER_BASE_RESERVED\)=.*#\1=(\"node0:${RESERVEDMEM}MB:1\" \"node1:2000MB:0\" \"node2:2000MB:0\" \"node3:2000MB:0\")#g" "${TARGET_FILE}"
    if [ $? -ne 0 ] ; then
        report_failure_with_msg "Cannot configure worker cpu/memory ; previous sed search and replace request failed"
    fi
    worker_reserved=$(grep WORKER_BASE_RESERVED "${TARGET_FILE}")
    ilog "${SYSTEM_TYPE__AIO} '${worker_reserved}'"

    # Update WORKER_CPU_LIST
    N_CPUS=$(cat /proc/cpuinfo 2>/dev/null | awk '/^[pP]rocessor/ { n +=1 } END { print (n>0) ? n : 1}')
    sed -i "s/^WORKER_CPU_LIST=.*/WORKER_CPU_LIST=\"0-$((N_CPUS-1))\"/" "${TARGET_FILE}"

    worker_cpu_list=$(grep WORKER_CPU_LIST "${TARGET_FILE}")
    ilog "${SYSTEM_TYPE__AIO} '${worker_cpu_list}'"
elif [ "${worker}" = true ] ; then
    # Keep logic contained and copy worker_reserved.conf now since we need
    # to do the copy for AIO above
    ilog "Enable ${TARGET_FILE} for ${TRAIT__WORKER}"
    if [ ! -e "${TEMPLATE_FILE}" ] ; then
        report_failure_with_msg "Cannot configure worker cpu/memory ; missing ${TEMPLATE_FILE}"
    fi
    cp "${TEMPLATE_FILE}" "${TARGET_FILE}"
    if [ ! -e "${TARGET_FILE}" ] ; then
        report_failure_with_msg "Cannot configure worker cpu/memory ; missing ${TARGET_FILE}"
    fi
fi

true
%end

###########################################################################

%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh

ilog "************************************"
ilog "***    Post - Interface Setup    ***"
ilog "************************************"

ilog "Creating network definitions in /etc/network/interfaces.d"
parse_miniboot_network_params

mgmt_dev=${BOOTPARAM_IFNAME}
mgmt_vlan=${BOOTPARAM_VLAN}
mgmt_address_family=${BOOTPARAM_MGMT_ADDRESS_FAMILY}

ilog "mgmt_dev : ${mgmt_dev}"
ilog "mgmt_vlan: ${mgmt_vlan}"

if [ ! -e "${IMAGE_ROOTFS}/etc/network/interfaces" ] ; then
cat << EOF >> ${IMAGE_ROOTFS}/etc/network/interfaces
# This file describes the network interfaces available on the system
# and how to activate them. For more information , see interfaces(5)
source ${IMAGE_ROOTFS}/etc/network/interfaces.d/*
EOF
fi

if [ ! -d "${IMAGE_ROOTFS}/etc/network/interfaces.d" ] ; then
    mkdir -p -m 0775 ${IMAGE_ROOTFS}/etc/network/interfaces.d
fi

ilog "Setup network scripts"

function create_network_interface_file()
{
    local ifname=${1}
    local address_family=${2}
    local vlan=${3:-}

    local ipversion=ipv4
    local ip_cmd_flag="-4"
    if [ "${address_family}" == "inet6" ]; then
        local ipversion=ipv6
        local ip_cmd_flag="-6"
    fi
    local ifname_vlan="vlan${vlan}"

    local logstr="Creating ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-${ifname}, ${ipversion}"
    [ -n "${vlan}" ] && logstr="${logstr}, vlan interface: ${ifname_vlan}"
    [ -n "${BOOTPARAM_GW}" ] && logstr="${logstr}, gw: ${BOOTPARAM_GW}"
    ilog "${logstr}"

    local output
    if [ -z "${vlan}" ]; then
        # Persist the boot device to the platform configuration
        # overwritten later if the management_interface is on a bonded interface.
        update_platform_conf "management_interface=${ifname}"

        # NO VLAN
        output="auto ${ifname}\n"
        output="${output}iface ${ifname} ${address_family} static\n"
        output="${output}    address ${BOOTPARAM_IP_ADDR}/$BOOTPARAM_PREFIX_LEN\n"
        if [ -n "${BOOTPARAM_GW}" ]; then
            output="${output}    gateway $BOOTPARAM_GW\n"
        fi
        output="${output}    mtu 1500\n"
        output="${output}    post-up echo 0 > /proc/sys/net/ipv6/conf/${ifname}/autoconf\n"
        output="${output}    post-up echo 0 > /proc/sys/net/ipv6/conf/${ifname}/accept_ra\n"
        output="${output}    post-up echo 0 > /proc/sys/net/ipv6/conf/${ifname}/accept_redirects\n"
        echo -e "${output}" > "${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-${ifname}"
    else
        # CONFIGURE FOR VLAN
        # Persist the boot device to the platform configuration. This will get
        # overwritten later if the management_interface is on a bonded interface.
        update_platform_conf "management_interface=${ifname_vlan}"

        # 1. Configure device interface:
        output="auto ${ifname}\n"
        output="${output}iface ${ifname} ${address_family} manual\n"
        output="${output}    post-up echo 0 > /proc/sys/net/ipv6/conf/${ifname}/autoconf\n"
        output="${output}    post-up echo 0 > /proc/sys/net/ipv6/conf/${ifname}/accept_ra\n"
        output="${output}    post-up echo 0 > /proc/sys/net/ipv6/conf/${ifname}/accept_redirects\n"
        echo -e "${output}" > "${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-${ifname}"

        # 2. Configure VLAN interface:
        output="auto ${ifname_vlan}\n"
        output="${output}iface ${ifname_vlan} ${address_family} static\n"
        output="${output}    vlan-raw-device ${ifname}\n"
        output="${output}    address ${BOOTPARAM_IP_ADDR}/${BOOTPARAM_PREFIX_LEN}\n"
        if [ -n "${BOOTPARAM_GW}" ]; then
            output="${output}    gateway ${BOOTPARAM_GW}\n"
        fi
        output="${output}    mtu 1500\n"
        output="${output}    post-up echo 0 > /proc/sys/net/ipv6/conf/${ifname_vlan}/autoconf\n"
        output="${output}    post-up echo 0 > /proc/sys/net/ipv6/conf/${ifname_vlan}/accept_ra\n"
        output="${output}    post-up echo 0 > /proc/sys/net/ipv6/conf/${ifname_vlan}/accept_redirects\n"
        echo -e "${output}" > "${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-${ifname_vlan}"
    fi
}

# Build networking scripts

# Loopback file
lo_file="${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-lo"
echo "auto lo" > "${lo_file}"
echo "iface lo ${mgmt_address_family} loopback" >> "${lo_file}"

if [ "${mgmt_dev}" != "lo" ]; then
    create_network_interface_file "${mgmt_dev}" "${mgmt_address_family}" "${mgmt_vlan}"
fi

ilog "Contents of ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-lo:"
ilog "$(cat "${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-lo")"

ilog "Contents of ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-${mgmt_dev}:"
ilog "$(cat "${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-${mgmt_dev}")"

if [ -f "${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-vlan${mgmt_vlan}" ]; then
    ilog "Contents of ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-vlan${mgmt_vlan}:"
    ilog "$(cat "${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-vlan${mgmt_vlan}")"
fi

# Clean machine-id file, it needs to be generated after install.
# It must be unique per installation because it is used to generate
# random MACs for SR-IOV VFs, among other resources.
find / -name machine-id | xargs rm -fv

true
%end

##########################################################################

%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh
ilog "*********************************************************"
ilog "***  Post Nochroot - Kickstart Finalize Install UUID  ***"
ilog "*********************************************************"

# Create a uuid specific to this installation
# install_uuid under /var needs to match what is written to /etc/platform/platform.conf
# When instflux=0 (/var not on a dedicated fluxdata partition)
# When instflux=1 (/var is part of the two different sysroot deployments).
# Therefore check if the file has been written and use that, otherwise generate it
feed="${IMAGE_ROOTFS}/var/www/pages/feed/rel-xxxPLATFORM_RELEASExxx"
[ ! -d "${feed}" ] && mkdir -p -m 0755 ${feed}
$(is_system_node_install)
if [ $? -ne 0 ] ; then
    if [ -e "${LAT_DIR}/INSTALL_UUID" ]; then
        INSTALL_UUID=$(< "${LAT_DIR}/INSTALL_UUID")
        ilog "Using saved install uuid ${INSTALL_UUID}"
    else
        INSTALL_UUID=`uuidgen`
        ilog "Generated install uuid ${INSTALL_UUID}"
        echo "${INSTALL_UUID}" > ${LAT_DIR}/INSTALL_UUID
    fi
    ilog "... adding to ${feed}"
    echo ${INSTALL_UUID} > ${feed}/install_uuid
    ilog "... adding to ${PLATFORM_CONF}"
    update_platform_conf "INSTALL_UUID=${INSTALL_UUID}"
else
    # miniboot: this code should never be hit
    report_failure_with_msg "Unexpected: incorrect node during UUID creation"
fi

true
%end

##########################################################################

%post --interpreter=/bin/bash
HOOK_LABEL="post"
. /tmp/lat/ks_functions.sh
ilog "****************************************"
ilog "***    Post - Log Filesystem Setup   ***"
ilog "****************************************"

display_volume_info "final"

true
%end

##########################################################################

%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh
ilog "***********************************************************"
ilog "***    Post Nochroot - Restage OSTree repo              ***"
ilog "***                  - Save Install Scripts and Logs    ***"
ilog "***********************************************************"
ilog "IMAGE_ROOTFS=${IMAGE_ROOTFS}"

get_variable "ostree_repo_fetched"
OSTREE_REPO_FETCHED=$?

# Fetch ostree
if [ "${controller}" = true ] ; then
    sw_release="xxxPLATFORM_RELEASExxx"  # updated by the build

    feed="${IMAGE_ROOTFS}/var/www/pages/feed/rel-${sw_release}"
    repo="${feed}/ostree_repo"
    pxedir="${IMAGE_ROOTFS}/var/pxeboot"

    if [ ${OSTREE_REPO_FETCHED} -eq 0 ] ; then
        if is_usb_install -eq 0 ; then
            # miniboot: always false
            report_failure_with_msg "Unexpected miniboot code block: usb install"
        else
            ilog "Stage ostree_repo from previous /sysroot pull to ${repo}"
            mv -f /sysroot/var/www/pages/feed/rel-${sw_release}/ostree_repo ${IMAGE_ROOTFS}/var/www/pages/feed/rel-${sw_release}/
        fi

        # This is used by patching.
        # Set ostree remote to the local install feed
        file_feed="file:///var/www/pages/feed/rel-${sw_release}/ostree_repo/"
        feed_branch="starlingx"
        ilog "Replacing ostree sysroot remote with: ${file_feed} ${feed_branch}"
        ostree --repo=/sysroot/ostree/repo remote delete ${instname}
        ostree --repo=/sysroot/ostree/repo remote add ${instname} ${file_feed} ${feed_branch}
        # Set feed ostree remote "starlingx" to point to active controller's feed ostree repo
        feed_remote_name="starlingx"
        feed_remote_url="http://controller:8080/feed/rel-${sw_release}/ostree_repo/"
        ilog "Replacing ostree feed remote with: ${feed_remote_url} ${feed_remote_name}"
        ostree --repo=${repo} remote delete ${feed_remote_name}
        ostree --repo=${repo} remote add ${feed_remote_name} ${feed_remote_url} ${feed_branch}

        # This fetch is only needed once because the repo is stored in /var
        set_variable "ostree_repo_fetched"

        # If the miniboot ISO contains a patches directory
        if [ -d "/instboot/patches" ]; then
            ilog "Prepatched iso"
            ilog "Creating patching metadata directories"
            mkdir -p ${IMAGE_ROOTFS}/var/rootdirs/opt/patching/metadata/{committed,available,applied}
            cp -a /instboot/patches/* ${IMAGE_ROOTFS}/var/rootdirs/opt/patching/metadata/committed/
        fi

        # copy efi.img to /var/pxeboot to enable duplex/multinode subclouds
        cp -a /instboot/efi.img ${pxedir}
        rc=$?
        if [ ${rc} -ne 0 ]; then
            elog "Failed to copy efi.img to ${pxedir}"
        fi


        # Temporary WorkAround: The current UEFI pxeboot loader does not call the
        # default provisioning grub menu in /var/pxeboot/pxelinux.cfg/grub.cfg.
        #
        # While the above issue is investigated, to support DX and system node
        # install for UEFI servers this code moves the lat grub.cfg aside and
        # creates a link to the default provisioning mac based grub menu.
        if [ ! -e ${pxedir}/EFI/BOOT ]; then
            mkdir -p ${pxedir}/EFI/BOOT
        fi

        pushd ${pxedir}/EFI/BOOT > /dev/null
        if [ ! -L grub.cfg ] ; then
            if [ -e grub.cfg ] ; then
                mv grub.cfg grub.cfg.lat
            fi
            ln -s ../../pxelinux.cfg/grub.cfg
        fi
        popd > /dev/null

    fi
fi

# Save the install scripts and kickstart logs
mount /dev/mapper/cgts--vg-log--lv "${IMAGE_ROOTFS}/${LOG_DIR}"
if [ ${?} -ne 0 ] ; then
    elog "Failed to mount /dev/mapper/cgts--vg-log--lv"
else
    if [ -e "${IMAGE_ROOTFS}/${LOG_DIR}" ]; then
        cp -a /${LAT_DIR} ${IMAGE_ROOTFS}/${LOG_DIR}
        cp /install ${IMAGE_ROOTFS}/${LOG_DIR}/lat
        cp /lat-installer* ${IMAGE_ROOTFS}/${LOG_DIR}/lat
        ilog "Saved installer data to ${IMAGE_ROOTFS}/${LOG_DIR}"
    else
        wlog "Could not save installer data"
    fi
    umount "${IMAGE_ROOTFS}/${LOG_DIR}"
fi

true
%end

##########################################################################

%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh

# This section needs to be removed when solutions are implemented

ilog "******************************************************************"
ilog "***    Post Nochroot - Workarounds for enabling integration    ***"
ilog "******************************************************************"

# Workaround for enabling swacts on AIO-DX
# Workaround for enabling compute unlocks
# Launchpad: #1983580
[ -f ${IMAGE_ROOTFS}/var/lib/dpkg/triggers/Unincorp ] && rm ${IMAGE_ROOTFS}/var/lib/dpkg/triggers/Unincorp

true
%end

##########################################################################

%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh

# This needs to update all available ostree based rootfs

ilog "******************************************************"
ilog "***    Post Nochroot - Set up filesystem access    ***"
ilog "******************************************************"

if [ "${controller}" = true ] ; then
    mkdir -p ${IMAGE_ROOTFS}/var/rootdirs/opt/platform-backup
    echo -e "LABEL=platform_backup\t/var/rootdirs/opt/platform-backup\text4\tdefaults\t1 2" >> ${IMAGE_ROOTFS}/etc/fstab
elif [ "${worker}" = true ] ; then
    mkdir -p ${IMAGE_ROOTFS}/var/rootdirs/opt/platform
    echo -e "controller-platform-nfs:/opt/platform\t/opt/platform\tnfs\ttimeo=30,udp,rsize=1024,wsize=1024,_netdev 0 0" >> ${IMAGE_ROOTFS}/etc/fstab
fi

mkdir -p ${IMAGE_ROOTFS}/var/rootdirs/scratch
echo -e "/dev/mapper/cgts--vg-scratch--lv\t/var/rootdirs/scratch\text4\tdefaults\t1 2" >> ${IMAGE_ROOTFS}/etc/fstab

mkdir -p ${IMAGE_ROOTFS}/var/log
echo -e "/dev/mapper/cgts--vg-log--lv\t/var/log\text4\tdefaults\t1 2" >> ${IMAGE_ROOTFS}/etc/fstab

# Report and update the lvm config for the sysroot. Remove preceeding tab and
# convert to spaces to align with puppet expectations
LV_PERSISTENT_ROOTDISK=$(get_persistent_disk ${LV_ROOTDISK})
log_lvm_conf "SysRoot Initial" ${IMAGE_ROOTFS}/etc/lvm/lvm.conf
ilog ""
ilog "Update the LVM global filter to enable the initial physical volume only: ${LV_PERSISTENT_ROOTDISK}"
ilog ""
sed -i "s@^\(\s*\)# global_filter = \[.*@        global_filter = [ \"a|${LV_PERSISTENT_ROOTDISK}|\", \"r|.*|\" ]@" ${IMAGE_ROOTFS}/etc/lvm/lvm.conf
log_lvm_conf "SysRoot Updated" ${IMAGE_ROOTFS}/etc/lvm/lvm.conf

eject_device=$(eject -d | awk -F\` '{print $2}' | awk -F\' '{print $1}')
ilog "eject device=$eject_device"
eject $eject_device
rc=$?
[ $rc -ne 0 ] && elog "eject failed, rc=$rc"

# Create first_boot flag
touch ${IMAGE_ROOTFS}/etc/platform/.first_boot
# Create first controller flag
touch ${IMAGE_ROOTFS}/etc/platform/.first_controller

true
%end

##########################################################################

%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh

# This needs to update all available ostree based rootfs

ilog "****************************************************************"
ilog "***    Post Nochroot - Set up package links per node type    ***"
ilog "****************************************************************"
ilog "IMAGE_ROOTFS=${IMAGE_ROOTFS}"

if [ ! -d "${IMAGE_ROOTFS}/etc/goenabled.d" ]; then
    wlog "Directory ${IMAGE_ROOTFS}/etc/goenabled.d is missing, creating it now"
    mkdir ${IMAGE_ROOTFS}/etc/goenabled.d
fi

if [ ! "${controller}" = true -a "${worker}" = true ] ; then
    ilog "Setting up ${TRAIT__WORKER} package file links"
    ln -s /etc/goenabled.d/config_goenabled_check.sh.worker ${IMAGE_ROOTFS}/etc/goenabled.d/config_goenabled_check.sh
    ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/controllerconfig.service
    ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/storageconfig.service
elif [ "${storage}" = true ] ; then
    ilog "Setting up ${TRAIT__STORAGE} package file links"
    ln -s /etc/goenabled.d/config_goenabled_check.sh.storage ${IMAGE_ROOTFS}/etc/goenabled.d/config_goenabled_check.sh
    ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/controllerconfig.service
    ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/workerconfig.service
elif [ "${controller}" = true ] ; then
    ilog "Setting up ${TRAIT__CONTROLLER} package file links"
    ln -s /etc/goenabled.d/config_goenabled_check.sh.controller ${IMAGE_ROOTFS}/etc/goenabled.d/config_goenabled_check.sh
    ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/workerconfig.service
    ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/storageconfig.service
fi

chmod 700 ${IMAGE_ROOTFS}/etc/goenabled.d/config_goenabled_check.sh

if [[ ! -d "${IMAGE_ROOTFS}/etc/pmon.d" ]]; then
    wlog "Directory ${IMAGE_ROOTFS}/etc/pmon.d/ is missing, creating it now"
    mkdir ${IMAGE_ROOTFS}/etc/pmon.d
fi

if [ "${controller}" = true ] ; then
    ilog "Setting up pmon files for ${TRAIT__CONTROLLER} and/or ${TRAIT__CONTROLLER} side of ${SYSTEM_TYPE__AIO}"
    ln -s /usr/share/starlingx/pmon.d/acpid.conf ${IMAGE_ROOTFS}/etc/pmon.d/acpid.conf
    ln -s /usr/share/starlingx/pmon.d/containerd.conf ${IMAGE_ROOTFS}/etc/pmon.d/containerd.conf
    ln -s /usr/share/starlingx/pmon.d/docker.conf ${IMAGE_ROOTFS}/etc/pmon.d/docker.conf
    ln -s /usr/share/starlingx/pmon.d/fm-api.conf ${IMAGE_ROOTFS}/etc/pmon.d/fm-api.conf
    ln -s /usr/share/starlingx/pmon.d/fsmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/fsmon.conf
    ln -s /usr/share/starlingx/pmon.d/hbsAgent.conf ${IMAGE_ROOTFS}/etc/pmon.d/hbsAgent.conf
    ln -s /usr/share/starlingx/pmon.d/hbsClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/hbsClient.conf
    ln -s /usr/share/starlingx/pmon.d/lmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/lmon.conf
    ln -s /usr/share/starlingx/pmon.d/logmgmt ${IMAGE_ROOTFS}/etc/pmon.d/logmgmt
    ln -s /usr/share/starlingx/pmon.d/mtcClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcClient.conf
    ln -s /usr/share/starlingx/pmon.d/mtcalarm.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcalarm.conf
    ln -s /usr/share/starlingx/pmon.d/mtclogd.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtclogd.conf
    ln -s /usr/share/starlingx/pmon.d/sm-api.conf ${IMAGE_ROOTFS}/etc/pmon.d/sm-api.conf
    ln -s /usr/share/starlingx/pmon.d/sm-eru.conf ${IMAGE_ROOTFS}/etc/pmon.d/sm-eru.conf
    ln -s /usr/share/starlingx/pmon.d/sm.conf ${IMAGE_ROOTFS}/etc/pmon.d/sm.conf
    ln -s /usr/share/starlingx/pmon.d/sshd.conf ${IMAGE_ROOTFS}/etc/pmon.d/sshd.conf
    ln -s /usr/share/starlingx/pmon.d/sssd.conf ${IMAGE_ROOTFS}/etc/pmon.d/sssd.conf
    ln -s /usr/share/starlingx/pmon.d/sw-patch-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sw-patch-agent.conf
    ln -s /usr/share/starlingx/pmon.d/sw-patch-controller-daemon.conf ${IMAGE_ROOTFS}/etc/pmon.d/sw-patch-controller-daemon.conf
    ln -s /usr/share/starlingx/pmon.d/sysinv-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sysinv-agent.conf
    ln -s /usr/share/starlingx/pmon.d/syslog-ng.conf ${IMAGE_ROOTFS}/etc/pmon.d/syslog-ng.conf
    ln -s /usr/share/starlingx/pmon.d/luks.conf ${IMAGE_ROOTFS}/etc/pmon.d/luks.conf
    ln -s /usr/share/starlingx/pmon.d/ipsec-server.conf ${IMAGE_ROOTFS}/etc/pmon.d/ipsec-server.conf
fi
if [ "${worker}" = true ] ; then
    ilog "Setting up pmon files for ${TRAIT__WORKER} and/or ${TRAIT__WORKER} side of ${SYSTEM_TYPE__AIO}"
    ln -s /usr/share/starlingx/pmon.d/acpid.conf ${IMAGE_ROOTFS}/etc/pmon.d/acpid.conf
    ln -s /usr/share/starlingx/pmon.d/containerd.conf ${IMAGE_ROOTFS}/etc/pmon.d/containerd.conf
    ln -s /usr/share/starlingx/pmon.d/docker.conf ${IMAGE_ROOTFS}/etc/pmon.d/docker.conf
    ln -s /usr/share/starlingx/pmon.d/fsmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/fsmon.conf
    ln -s /usr/share/starlingx/pmon.d/hbsClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/hbsClient.conf
    ln -s /usr/share/starlingx/pmon.d/isolcpu_plugin.conf ${IMAGE_ROOTFS}/etc/pmon.d/isolcpu_plugin.conf
    ln -s /usr/share/starlingx/pmon.d/lmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/lmon.conf
    ln -s /usr/share/starlingx/pmon.d/logmgmt ${IMAGE_ROOTFS}/etc/pmon.d/logmgmt
    ln -s /usr/share/starlingx/pmon.d/mtcClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcClient.conf
    ln -s /usr/share/starlingx/pmon.d/mtcalarm.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcalarm.conf
    ln -s /usr/share/starlingx/pmon.d/mtclogd.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtclogd.conf
    ln -s /usr/share/starlingx/pmon.d/sm-eru.conf ${IMAGE_ROOTFS}/etc/pmon.d/sm-eru.conf
    ln -s /usr/share/starlingx/pmon.d/sshd.conf ${IMAGE_ROOTFS}/etc/pmon.d/sshd.conf
    ln -s /usr/share/starlingx/pmon.d/sssd.conf ${IMAGE_ROOTFS}/etc/pmon.d/sssd.conf
    ln -s /usr/share/starlingx/pmon.d/sw-patch-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sw-patch-agent.conf
    ln -s /usr/share/starlingx/pmon.d/sysinv-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sysinv-agent.conf
    ln -s /usr/share/starlingx/pmon.d/syslog-ng.conf ${IMAGE_ROOTFS}/etc/pmon.d/syslog-ng.conf
fi
if [ "${storage}" = true ] ; then
    ilog "Setting up pmon files for ${TRAIT__STORAGE} and/or ${TRAIT__STORAGE} side of ${SYSTEM_TYPE__AIO}"
    ln -s /usr/share/starlingx/pmon.d/acpid.conf ${IMAGE_ROOTFS}/etc/pmon.d/acpid.conf
    ln -s /usr/share/starlingx/pmon.d/containerd.conf ${IMAGE_ROOTFS}/etc/pmon.d/containerd.conf
    ln -s /usr/share/starlingx/pmon.d/docker.conf ${IMAGE_ROOTFS}/etc/pmon.d/docker.conf
    ln -s /usr/share/starlingx/pmon.d/fsmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/fsmon.conf
    ln -s /usr/share/starlingx/pmon.d/hbsClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/hbsClient.conf
    ln -s /usr/share/starlingx/pmon.d/lmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/lmon.conf
    ln -s /usr/share/starlingx/pmon.d/logmgmt ${IMAGE_ROOTFS}/etc/pmon.d/logmgmt
    ln -s /usr/share/starlingx/pmon.d/mtcClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcClient.conf
    ln -s /usr/share/starlingx/pmon.d/mtcalarm.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcalarm.conf
    ln -s /usr/share/starlingx/pmon.d/mtclogd.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtclogd.conf
    ln -s /usr/share/starlingx/pmon.d/sm-eru.conf ${IMAGE_ROOTFS}/etc/pmon.d/sm-eru.conf
    ln -s /usr/share/starlingx/pmon.d/sshd.conf ${IMAGE_ROOTFS}/etc/pmon.d/sshd.conf
    ln -s /usr/share/starlingx/pmon.d/sssd.conf ${IMAGE_ROOTFS}/etc/pmon.d/sssd.conf
    ln -s /usr/share/starlingx/pmon.d/sw-patch-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sw-patch-agent.conf
    ln -s /usr/share/starlingx/pmon.d/sysinv-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sysinv-agent.conf
    ln -s /usr/share/starlingx/pmon.d/syslog-ng.conf ${IMAGE_ROOTFS}/etc/pmon.d/syslog-ng.conf
fi

true
%end

# vim: filetype=sh