#
# Copyright (c) 2022 Wind River Systems, Inc.
# SPDX-License-Identifier: Apache-2.0
#
############################################################################
#
# StarlingX Debian Unified System Node Install Kickstart
#
############################################################################
#
# This is the unified kickstart for Debian installation of system nodes.
#
# The Linux Assembly Tool (LAT) performs a unified install for all system
# nodes and exposes boot loader environment variables to this kickstart.
#
# This kickstart must be called with the 'traits=' boot parameter.
# Valid traits are:
#
#   controller                          ... the controller function
#   storage                             ... the storage function
#   worker                              ... the worker function
#   lowlatency                          ... the low latency function
#
# Valid node personality trait groupings  ... set configuration function
#
#   traits=controller                   ... Controller
#   traits=controller,worker            ... All-in-one
#   traits=controller,worker,lowlatency ... All-in-one Low Latency
#   traits=storage                      ... Storage
#   traits=worker                       ... Worker
#   traits=worker,lowlatency            ... Worker Low Latency
#
# Kickstart Stages
#
#   Kickstart Early - Common Functions Script
#   Pre Partition - Pre Disk Setup Common Script
#   Partition     - Partition Disks
#   Mkfs          - Format Partitions & LVM Volumes
#   Post          - Traits & Platform Config File update
#   Post          - Set Kernel Args
#   Post          - Interface Setup
#   Post          - Kickstart Finalize Install UUID
#   Post          - Upgrade Support
#   Post Nochroot - Restage OSTree repo
#                 - Save Install Scripts and Logs
#   Post          - Log Filesystem Setup
#   Post Nochroot - Save Install scripts and Logs
#   Post Nochroot - Workarounds for enabling integration
#   Post Nochroot - Set up filesystems access
#   Post Nochroot - Set up package links per node type
#
###########################################################################
#
# The first kickstart script creates '/tmp/lat/functions' common functions
# file that can be loaded from any of the other hook sections.
#
###########################################################################
# Kickstart Early - Common Functions Script
%ks-early --interpreter=/bin/bash

# Define a hook to report error log if install failed
cat << EOF > /tmp/lat/report_error_log.sh
#!/bin/bash
_dev=\$(blkid --label fluxdata -o device)
if [ "\$_dev" != "" ] ; then
    mkdir -p /t
    mount -o rw,noatime \$_dev /t
    echo "Save install-fail.log to partition fluxdata /var (\$_dev)"
    sleep 2
    cp /install.log /t/install-fail.log
    umount /t
fi
EOF
chmod 755 /tmp/lat/report_error_log.sh

cat << EOF >> /tmp/lat/ks_functions.sh

[ "\${HOOK_LABEL}" = "" ] && HOOK_LABEL="unknown"

export LOG_DIR="var/log"
export LAT_DIR="tmp/lat"
export LOGFILE="/\${LAT_DIR}/kickstart.log"

############################################################################
# log utils
############################################################################
function log()
{
    local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")"
    echo "\$dt kickstart \${HOOK_LABEL}  info: \${prefix} \$1" >>\${LOGFILE}
}

function ilog()
{
    [ -z "\${stdout}" ] && stdout=1
    local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")"
    echo "\$dt kickstart \${HOOK_LABEL}  info: \${prefix} \$1" >&\${stdout}
    echo "\$dt kickstart \${HOOK_LABEL}  info: \${prefix} \$1" >>\${LOGFILE}
}

function dlog()
{
    if [ \${debug} -ne 0 ] ; then
        [ -z "\$stdout" ] && stdout=1
        local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")"
        echo "\$dt kickstart \${HOOK_LABEL} debug: \${prefix} \$1" >&\${stdout}
        echo "\$dt kickstart \${HOOK_LABEL} debug: \${prefix} \$1" >>\${LOGFILE}
    fi
}

function wlog()
{
    [ -z "\$stdout" ] && stdout=1
    local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")"
    echo "\$dt kickstart \${HOOK_LABEL}  warn: \${prefix} \$1" >&\${stdout}
    echo "\$dt kickstart \${HOOK_LABEL}  warn: \${prefix} \$1" >>\${LOGFILE}
}

function elog()
{
    [ -z "\$stdout" ] && stdout=1
    local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")"
    echo "\$dt kickstart \${HOOK_LABEL} error: \${prefix} \$1" >&\${stdout}
    echo "\$dt kickstart \${HOOK_LABEL} error: \${prefix} \$1" >>\${LOGFILE}
}

########################################################################
# Name      : report_failure_with_msg
# Purpose   : Report installation error, offer a console and
#             reboot on exit.
# Parameters: \$1 is the failure message string
# Return    : Does not return
########################################################################
function report_failure_with_msg()
{
    local msg=\${1}
    echo -e '\n\nInstallation failed.\n'
    wlog "Installation Failed: ERROR: \${msg}"
    echo "... dropping to shell ; exit to reboot ..."
    sleep 1
    bash
    reboot -f
}

########################################################################
# Name      : get_disk
# Parameters: \$1 - ??????
# Returns   : No return but common disk name is echo's to stdio
#########################################################################
function get_disk()
{
    echo "\$(cd /dev ; readlink -f \$1)"
}

#########################################################################
# Name      : get_by_path
# Parameters: \$1 - device name i.e. /dev/sda
# Returns   : echo of device name by-path
#    example: /dev/disk/by-path/pci-0000:03:00.0-scsi-0:2:0:0
#
# Notes: During kickstarts there are 2 links to a generic /dev/sd<X>.
#        Example: pci-0000:00:1f.2-ata-1 and pci-0000:00:1f.2-ata-1.0.
#        After reboot only the longer 'ata-1.0' exists.
#        Reverse the parsing so we return the longer path.
#########################################################################
function get_by_path()
{
    # log "Function: get_by_path '\${1}'"
    local disk=\$(cd /dev ; readlink -f \$1)
    reverse_list=""
    for p in /dev/disk/by-path/*; do
        reverse_list="\${p} \${reverse_list}"
    done
    for p in \${reverse_list}; do
        if [ "\$disk" = "\$(readlink -f \$p)" ]; then
            echo "\$p"
            return
        fi
    done
}

#########################################################################
# Name      : get_disk_dev
# Purpose   : get the disk name
# Returns   : echo of the first disk name found ; base on coded priority
#########################################################################
function get_disk_dev()
{
    local disk
    # Detect HDD
    for blk_dev in vda vdb sda sdb dda ddb hda hdb; do
        if [ -d /sys/block/\$blk_dev ]; then
            disk=\$(ls -l /sys/block/\$blk_dev | grep -v usb | head -n1 | sed 's/^.*\([vsdh]d[a-z]\+\).*\$/\1/');
            if [ -n "\$disk" ]; then
                echo "\$disk"
                return
            fi
        fi
    done
    for blk_dev in nvme0n1 nvme1n1; do
        if [ -d /sys/block/\$blk_dev ]; then
            disk=\$(ls -l /sys/block/\$blk_dev | grep -v usb | head -n1 | sed 's/^.*\(nvme[01]n1\).*\$/\1/');
            if [ -n "\$disk" ]; then
                echo "\$disk"
                return
            fi
        fi
    done
}

#########################################################################
# Name      : exec_retry
# Purpose   : Retry operations up to a caller specified ...
# Parameters: $1 - retries - up to number of retries before giving up
#             $2 - time in seconds between each retry
#             $3 - the command string to execute
# Returns   : exit code from last command operation
#########################################################################
function exec_retry()
{
    local retries=\${1}
    local interval=\${2}
    local command=\${3}

    # local variables
    retry_count=1
    local ret_code=0
    local ret_stdout=""

    command="\${command}" # 2>&\${stdout}"
    while [ \${retry_count} -le \${retries} ]; do
        # dlog "Running command: '\${command}'."
        ret_stdout=\$(eval \${command})
        ret_code=\${?}
        [ \${ret_code} -eq 0 ] && break
        wlog "Error running command '\${command}'. Try \${retry_count} of \${retries} retry in \${interval}s."
        wlog "ret_code: \${ret_code}, stdout: '\${ret_stdout}'."
        sleep \${interval}
        retry_count=\$((retry_count+1))
    done
    echo "\${ret_stdout}"
    return \${ret_code}
}

#########################################################################
# Name      : exec_no_fds
# Purpose   : Execute command (with retries) after closing fds
# Parameters: $1 - List of volume file descriptors
#             $2 - the command string to execute
#             $3 - up to number of retries before giving up
#             $4 - time in seconds between each retry
# Returns   : exit code from last command operation
#########################################################################

function exec_no_fds()
{
    # Close open FDs when executing commands that complain about leaked FDs.
    local fds=\${1}
    local cmd=\${2}
    local retries=\${3}
    local interval=\${4}

    local ret_code=0
    local ret_stdout=""
    for fd in \${fds}
    do
        local cmd="\${cmd} \$fd>&-"
    done
    if [ -z "\${retries}" ]; then
        #wlog "Running command: '\${cmd}'."
        eval "\${cmd}"
    else
        ret_stdout=\$(exec_retry "\${retries}" "\${interval}" "\${cmd}")
        ret_code=\${?}
        echo "\${ret_stdout}"
        return \${ret_code}
    fi
}

#########################################################################
# Name     : is_system_node_install
# Returns  : true : 0 if 'pxecontroller' is in $insturl boot arg
#            false: 1
#########################################################################
function is_system_node_install()
{
    if [[ "\${insturl}" == *"pxecontroller"* ]] ; then
        return 0
    else
        return 1
    fi
}

#########################################################################
# Name     : is_usb_install
# Returns  : true :0
#            false:1
#########################################################################
function is_usb_install()
{
    pxeurl=\$(echo \${insturl} | sed -e s/ostree_repo//)
    if [ "\${pxeurl}" = "file://NOT_SET" ] ; then
        return 0
    else
        return 1
    fi
}

#########################################################################
# Name     : check_prestage
# Returns  : true :0
#            false:1
#########################################################################
function check_prestage()
{
    set -- `cat /proc/cmdline`

    for value in "\$@"; do
        if [ "\${value}" = "prestage" ]; then
                touch /tmp/lat/.prestage
                return 0
        fi
    done
    return 1
}

#########################################################################
# Name     : is_prestage
# Returns  : true :0
#            false:1
#########################################################################
function is_prestage()
{
    if [ -e /tmp/lat/.prestage ] ; then
        return 0
    else
        return 1
    fi
}
#########################################################################
# Name     : update_platform_conf
# Purpose  : Update the platform.conf file with logging
#########################################################################

PLATFORM_CONF="/etc/platform/platform.conf"
function update_platform_conf()
{
    ilog "update \${IMAGE_ROOTFS}\${PLATFORM_CONF} : \${1}"
    echo "\${1}" >> \${IMAGE_ROOTFS}\${PLATFORM_CONF}
}

#########################################################################
# Name     : get_iface_from_ethname
# Purpose  : Translate eth# interface to the alternate predicitive
#            interface name'altname'.
# Parameter: eth# name interface string to translate
# Return   : echo's of altname interface string
#########################################################################
# TODO: Move to where its used if there is only one section caller
function get_iface_from_ethname()
{
    iface=\${1}

    # log the interface info for post issue debug
    udevadm info --export --query=property --path=/sys/class/net/\${iface} >> \${LOGFILE}

    # convert to predictive name: ONBOARD > SLOT > PATH
    # https://wiki.debian.org/NetworkInterfaceNames
    altname=\$(udevadm info --export --query=property --path=/sys/class/net/\${iface} | grep ID_NET_NAME_ONBOARD)
    altname=\${altname#ID_NET_NAME_ONBOARD=}

    if [ -z "\${altname}" ] ; then
        # try searching for ID_NET_NAME_SLOT
        log "... retrying to translate \${iface} to predictive name with ID_NET_NAME_SLOT filter label "
        altname=\$(udevadm info --export --query=property --path=/sys/class/net/\${iface} | grep ID_NET_NAME_SLOT)
        altname=\${altname#ID_NET_NAME_SLOT=}
    fi

    if [ -z "\${altname}" ] ; then
        # try searching for ID_NET_NAME_PATH
        log "... retrying to translate \${iface} to predictive name with ID_NET_NAME_PATH filter label "
        altname=\$(udevadm info --export --query=property --path=/sys/class/net/\${iface} | grep ID_NET_NAME_PATH)
        altname=\${altname#ID_NET_NAME_PATH=}
    fi

    # The altname is seen enveloped with tick's ; 'eno1'
    # Handle with and without tick's just in case
    if [ -z "\${altname}" ] ; then
        log "Failed to translate \${iface} to predictive name"
    elif [ "\${altname::1}" = "'" ] ; then
        echo "\${altname:1:-1}"
    else
        echo "\${altname}"
    fi
}

function display_volume_info ()
{
    if [ \${debug} -ne 0 ] ; then
        ilog "Volume Info:\${1}"

        pvscan 2>/dev/null
        pvscan 2>/dev/null >> \${LOGFILE}

        lvscan 2>/dev/null
        lvscan 2>/dev/null >> \${LOGFILE}

        pvdisplay 2>/dev/null
        pvdisplay 2>/dev/null >> \${LOGFILE}

        lvdisplay 2>/dev/null
        lvdisplay 2>/dev/null >> \${LOGFILE}
    fi
}

display_mount_info()
{
    if [ \${debug} -ne 0 ] ; then
        echo "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
        lsblk -o name,mountpoint,label,size,uuid
        echo "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
    fi
}

function log_lvm_conf ()
{
    local msg=\${1}
    local conf=\${2}
    lvm_global_filter=\$(cat \${conf} | grep "global_filter =")
    lvm_preferred_names=\$(cat \${conf} | grep "preferred_names =")

    ilog "\${msg}: \${conf}: \${lvm_global_filter}"
    ilog "\${msg}: \${conf}: \${lvm_preferred_names}"
}

function breakpoint()
{
    echo "*** BREAKPOINT ***: \${1} ; type exit to continue"
    bash
    echo "continuing from breakpoint: \${1}"
}

function set_variable()
{
    touch "/\${LAT_DIR}/\${1}"
}

function get_variable()
{
    [ -e "/\${LAT_DIR}/\${1}" ] && return 1
    return 0
}

function clr_variable()
{
    rm -f "/\${LAT_DIR}/\${1}"
}

#########################################################################
# Name     : get_aio_controller_provisioning_sizes
# Purpose  : Provide partition, physical volume, and logical volume sizes
# Parameter: None
# Return   : Nothing, but exports key values
#########################################################################
function get_aio_controller_provisioning_sizes()
{
    gib=\$((1024*1024*1024))

    # Partitions
    export PART_SZ_EFI=300
    export PART_SZ_BOOT=2048
    export PART_SZ_ROOT=0

    # Logical volumes
    export LV_SZ_LOG=8000
    export LV_SZ_ROOT=20480
    export LV_SZ_SCRATCH=16000
    export LV_SZ_VAR=20480

    ##
    ## NOTE: updates to partition sizes need to be also reflected in
    ##  - config/.../sysinv/conductor/manager.py:create_controller_filesystems()
    ##  - config/.../sysinv/common/constants.py
    ##
    ## NOTE: When adding partitions, we currently have a max of 4 primary partitions.
    ##       If more than 4 partitions are required, we can use a max of 3 --asprimary,
    ##       to allow 1 primary logical partition with extended partitions
    ##
    ## NOTE: Max default PV size must align with the default controllerfs sizes
    ##
    ##
    ## NOTE TO REVIEWERS:
    ## This section was talen from CentOS and needs to be updated for Debian.
    ##
    ##***********************************************************************
    ## Large disk install (for disks over 240GB)
    ##  - DB size is doubled to allow for upgrades
    ##
    ## BACKUP_OVERHEAD = 5GiB
    ## DEFAULT_PLATFORM_STOR_SIZE = 10GiB
    ## DEFAULT_DATABASE_STOR_SIZE = 10GiB
    ## BACKUP = DEFAULT_DATABASE_STOR_SIZE +
    ##          DEFAULT_PLATFORM_STOR_SIZE +
    ##          BACKUP_OVERHEAD = 25GiB
    ## LV_SZ_LOG = 8GiB
    ## LV_SZ_ROOT = 20 GiB
    ## LV_SZ_SCRATCH = 16GiB
    ## LV_SZ_VAR = 20 GiB
    ## RABBIT_LV = 2GiB
    ## DEFAULT_EXTENSION_STOR_SIZE = 1GiB
    ## KUBERNETES_DOCKER_STOR_SIZE = 30GiB
    ## DOCKER_DISTRIBUTION_STOR_SIZE = 16GiB
    ## ETCD_STOR_SIZE = 5GiB
    ## CEPH_MON_SIZE = 20GiB
    ## KUBELET_STOR_SIZE = 10GiB
    ## DC_VAULT_SIZE = 15GiB
    ## RESERVED_PE = 16MiB (based on pesize=32768)
    ##
    ## MINIMUM_PLATFORM_PV_SIZE = (10 + 2*10 + 25 + 8 + 20 + 16 + 20 + 2 + 1 + 30 + 16 + 5 + 20 + 10 + 15)GiB + 16MiB/1024 = 218.02GiB
    ##
    ##***********************************************************************
    ## Small disk install - (for disks below 240GB)
    ##  - DB size is doubled to allow for upgrades
    ##
    ## DEFAULT_PLATFORM_STOR_SIZE = 10GiB
    ## DEFAULT_SMALL_DATABASE_STOR_SIZE = 5GiB
    ## DEFAULT_SMALL_BACKUP_STOR_SIZE = 20GiB
    ##
    ## LV_SZ_LOG = 8GiB
    ## LV_SZ_SCRATCH = 16GiB
    ## RABBIT_LV = 2GiB
    ## DEFAULT_EXTENSION_STOR_SIZE = 1GiB
    ## KUBERNETES_DOCKER_STOR_SIZE = 30GiB
    ## DOCKER_DISTRIBUTION_STOR_SIZE = 16GiB
    ## ETCD_STOR_SIZE = 5GiB
    ## CEPH_MON_SIZE = 20GiB
    ## KUBELET_STOR_SIZE = 10GiB
    ## DC_VAULT_SIZE = 15GiB
    ## RESERVED_PE = 16MiB (based on pesize=32768)
    ##
    ## MINIMUM_PLATFORM_PV_SIZE = (10 + 2*5 + 20 + 8 + 16 + 2 + 1 + 30 + 16 + 5 + 20 + 10 + 15)GiB + 16MiB/1024 = 163.02GiB
    ##
    ##***********************************************************************
    ## Tiny disk install - (for disks below 154GB)
    ##
    ## NOTE: Tiny disk setup is mainly for StarlingX running in QEMU/KVM VM.
    ##
    ## DEFAULT_TINY_PLATFORM_STOR_SIZE = 1GiB
    ## DEFAULT_TINY_DATABASE_STOR_SIZE = 1GiB
    ## DEFAULT_TINY_BACKUP_STOR_SIZE = 1GiB
    ##
    ## LV_SZ_LOG = 3GiB
    ## LV_SZ_SCRATCH = 2GiB
    ## RABBIT_LV = 2GiB
    ## DEFAULT_EXTENSION_STOR_SIZE = 1GiB
    ## TINY_KUBERNETES_DOCKER_STOR_SIZE = 20GiB
    ## TINY_DOCKER_DISTRIBUTION_STOR_SIZE = 8GiB
    ## TINY_ETCD_STOR_SIZE = 1GiB
    ## TINY_KUBELET_STOR_SIZE = 2GiB
    ##
    ## MINIMUM_PLATFORM_PV_SIZE = (1 + 2*1 + 1 + 3 + 2 + 2 + 1 + 20 + 8 + 1 + 2)GiB = 43GiB
    ##
    ## MINIMUM_TINY_DISK_SIZE = MINIMUM_PLATFORM_PV_SIZE + PART_SZ_ROOT + PART_SZ_EFI + PART_SZ_BOOT + FLUXDATA + BACKUP_SIZE
    ##                        = 43 + 20 + 0.03 + 0.5 + 20 + 1 = 85GiB

    # TODO: create a log representing 'free space" on self expand partition.

    # TODO: Do the math for this new environment

    # The default disk size thresholds must align with the ones in
    #   config/.../sysinv/common/constants.py
    #   which are DEFAULT_SMALL_DISK_SIZE
    #             MINIMUM_SMALL_DISK_SIZE
    default_small_disk_size=240
    minimum_small_disk_size=196
    sz=\$(blockdev --getsize64 \${INSTDEV})
    ilog "Install disk \${INSTDEV} has size:\${sz}B, \$((\${sz}/\$gib))GiB"

    # Round MINIMUM_PLATFORM_PV_SIZE to the closest upper value that can be divided by 1024.
    if [ \${sz} -gt \$((\${default_small_disk_size}*\${gib})) ] ; then
        ilog "Large disk: MINIMUM_PLATFORM_PV_SIZE=219GiB*1024=224256 MiB"
        export BACKUP_DEFAULT_PERSISTENT_SIZE=30000
    elif [ \${sz} -ge \$((\${minimum_small_disk_size}*\${gib})) ] ; then
        ilog "Small disk: MINIMUM_PLATFORM_PV_SIZE=164GiB*1024=167936 MiB"
        export BACKUP_DEFAULT_PERSISTENT_SIZE=30000
    else
        ilog "Tiny disk: MINIMUM_PLATFORM_PV_SIZE=43GiB*1024=44032 MiB"
        # Using a disk with a size under 85GiB will fail.
        export LV_SZ_LOG=3000
        export LV_SZ_SCRATCH=2000
        export BACKUP_DEFAULT_PERSISTENT_SIZE=1000
    fi
}

#########################################################################
# Name     : get_std_controller_provisioning_sizes
# Purpose  : Provide partition, physical volume, and logical volume sizes
# Parameter: None
# Return   : Nothing, but exports key values
#########################################################################
function get_std_controller_provisioning_sizes()
{

    ## NOTE: updates to partition sizes need to be also reflected in
    ## _controller_filesystem_limits() in sysinv/api/controllers/v1/istorconfig.py

    # Partitions
    export PART_SZ_EFI=300
    export PART_SZ_BOOT=2048
    export PART_SZ_ROOT=0
    export BACKUP_DEFAULT_PERSISTENT_SIZE=30000

    # Logical volumes
    export LV_SZ_LOG=8000
    export LV_SZ_ROOT=20480
    export LV_SZ_SCRATCH=16000
    export LV_SZ_VAR=20480

}
#########################################################################
# Name     : get_worker_provisioning_sizes
# Purpose  : Provide partition, physical volume, and logical volume sizes
# Parameter: None
# Return   : Nothing, but exports key values
#########################################################################
function get_worker_provisioning_sizes()
{
    gib=\$((1024*1024*1024))

    # Partitions
    export PART_SZ_EFI=300
    export PART_SZ_BOOT=2048
    export PART_SZ_ROOT=0

    # Logical volumes
    export LV_SZ_LOG=4096
    export LV_SZ_SCRATCH=4096

    # Physical volumes
    ## LV_SZ_LOG = 4096
    ## LV_SZ_SCRATCH = 4096
    ## LV_SZ_VAR=20480
    ##
    ## DOCKER = 30720
    ## CEPH_MON = 20480
    ## KUBELET_VOL_SIZE = 10240
    ## RESERVED_PE = 16 (based on pesize=32768)
    ##
    ## CGTS_PV_SIZE = 4096 + 4096 + 30720 + 20480 + 10240 + 16 = 69648
    ##
    ## Round CGTS_PV_SIZE to the closest upper value that can be divided by 1024.
    ## 69648/1024=68.01. CGTS_PV_SIZE=69*1024=70656.

    sz=\$(blockdev --getsize64 \${INSTDEV})
    if [ \$sz -le \$((120*\$gib)) ] ; then
        export LV_SZ_ROOT=10240
        export LV_SZ_VAR=10240
    else
        export LV_SZ_ROOT=20480
        export LV_SZ_VAR=20480
    fi

    ilog "Install disk \${INSTDEV} has size:\${sz}B, \$((\${sz}/\$gib))GiB"
}

#########################################################################
# Name     : get_storage_provisioning_sizes
# Purpose  : Provide partition, physical volume, and logical volume sizes
# Parameter: None
# Return   : Nothing, but exports key values
#########################################################################
function get_storage_provisioning_sizes()
{
    gib=\$((1024*1024*1024))

    # Partitions
    export PART_SZ_EFI=300
    export PART_SZ_BOOT=2048
    export PART_SZ_ROOT=0

    # Logical volumes
    sz=\$(blockdev --getsize64 \${INSTDEV})
    if [ \$sz -le \$((120*\$gib)) ] ; then
        export LV_SZ_LOG=4000
        export LV_SZ_ROOT=10240
        export LV_SZ_SCRATCH=4000
        export LV_SZ_VAR=10240
    else
        export LV_SZ_LOG=8000
        export LV_SZ_ROOT=20480
        export LV_SZ_SCRATCH=8000
        export LV_SZ_VAR=20480
    fi

    ilog "Install disk \${INSTDEV} has size:\${sz}B, \$((\${sz}/\$gib))GiB"
}

#########################################################################
# Name     : parse_miniboot_network_params
# Purpose  : Setup IP addressing for two cases:
#            1) initial boot and 2) persistent across reboot
# Parameter: operation: one of 'initial' or 'persistent'
# Return   : Nothing
#########################################################################
function parse_miniboot_network_params()
{
    # Unused: only here for simpler diff with miniboot
    elog "Unused: parse_miniboot_network_params"
}

##########################################################################
#                      Global Kickstart Constants                        #
##########################################################################
#
# NOTE: exported Variables from other segments are NOT visible from functions
#

# Log the server firmware type
if [ -d /sys/firmware/efi ] ; then
    ilog "UEFI Firmware execution"
    USE_UEFI_PARTITIONS=1
else
    ilog "BIOS Firmware execution"
    USE_UEFI_PARTITIONS=0
fi

if [ "\${controller}" = true ] ; then
    # Legacy locations of the backup partition
    BACKUP_PART_UEFI=1
    BACKUP_PART_BIOS=2

    # Set the expected locations of the backup partition
    if [ "\$USE_UEFI_PARTITIONS" = 0 ] ; then
        BACKUP_PART_NO=\${BACKUP_PART_BIOS}
    else
        BACKUP_PART_NO=\${BACKUP_PART_UEFI}
    fi
    case \${INSTDEV} in
        *"nvme"*)
            BACKUP_PART=\${INSTDEV}p\${BACKUP_PART_NO}
            ;;
        *)
            BACKUP_PART=\${INSTDEV}\${BACKUP_PART_NO}
            ;;
    esac
    BACKUP_PART_LABEL="platform_backup"

    # Note that the BA5EBA11-0000-1111-2222- is the prefix used by STX and it's
    # defined in sysinv constants.py. Since the 000000000001 suffix is used by
    # custom stx LVM partitions, the next suffix is used for the persistent backup
    # partition (000000000002)
    BACKUP_PART_GUID="BA5EBA11-0000-1111-2222-000000000002"
fi

# Node Personality Trait
TRAIT__CONTROLLER="controller"
TRAIT__STORAGE="storage"
TRAIT__WORKER="worker"
TRAIT__LOWLATENCY="lowlatency"

# System Types
SYSTEM_TYPE__AIO="All-in-one"
SYSTEM_TYPE__STANDARD="Standard"

# Node Subfunctions
SUBFUNCTION__CONTROLLER="\${TRAIT__CONTROLLER}"
SUBFUNCTION__STORAGE="\${TRAIT__STORAGE}"
SUBFUNCTION__WORKER="\${TRAIT__WORKER}"
SUBFUNCTION__AIO="\${TRAIT__CONTROLLER},\${TRAIT__WORKER}"
VOLUME_GROUPS="cgts-vg"
EOF
###############################
# END of Common Functions Block
###############################

chmod 755 /tmp/lat/ks_functions.sh
HOOK_LABEL="ks-early"
. /tmp/lat/ks_functions.sh

##########################################################################
#                     Global Kickstart variables                         #
##########################################################################

export debug=0
export prefix=""

# Assume there is no Platform Backup (persistent) Partition
export BACKUP_PART_FOUND=0

export STOR_DEV_FDS=""

export PROC_SELF_FDS="$(ls -1 /proc/$$/fd | egrep -v "^(0|1|2|255)$" | xargs)"
for fd in ${PROC_SELF_FDS}; do
    export realpath=$(readlink -f /proc/$$/fd/"${fd}")
    if [ -e "${realpath}" ]; then
        STOR_DEV_FDS="${STOR_DEV_FDS} ${fd}"
    fi
done

##########################################################################
#                     Local Kickstart variables                          #
##########################################################################
BACKUP_PART_FIRST=0
BACKUP_PART_END=0
BACKUP_PART_SIZE=0
BACKUP_PART_FLAGS=0
BACKUP_PART_NAME=""

##########################################################################

ilog "*****************************************************"
ilog "***   Pre Partition - Volume Remove & Wipe Disk   ***"
ilog "*****************************************************"

if [ -z "${traits}" ] ; then
    report_failure_with_msg "No install traits specified ; need boot arg traits=<controller|worker|storage|lowlatency>"
fi

ilog "Waiting for disks to be available"
udevadm settle --timeout=300 || report_failure_with_msg "udevadm settle failed"
ilog "Disks became available"

export controller=false
export storage=false
export worker=false
export lowlatency=false
export aio=false

for trait in ${traits//,/ }; do
   # dlog "trait:${trait}"
   case ${trait} in
       "controller")      controller=true ;;
       "storage")            storage=true ;;
       "worker")              worker=true ;;
       "lowlatency")      lowlatency=true ;;
       *) wlog "unknown trait '${trait}'" ;;
   esac
done

# Force enable 'lowlatency' trait if the realtime kernel is detected ; PREEMPT_RT
uname=$(uname -a)
if [[ "${uname}" == *"PREEMPT_RT"* ]] ; then
    if [ "${lowlatency}" = false ] ; then
        wlog "forcing lowlatency trait after discovering the RT kernel"
        lowlatency=true
    fi
fi

# Handle trait conbination errors
#
# Handle no valid nodetypes specified
if [ "${controller}" = false -a "${storage}" = false -a "${worker}" = false ] ; then
    report_failure_with_msg "No valid install traits specified ; ${traits} ; need boot arg traits=<controller|worker|storage>"
# Storage and controller don't go together
elif [ "${storage}" = true -a "${controller}" = true ] ; then
    report_failure_with_msg "Cannot combine storage and controller traits"
# Storage and lowlatency don't go together
elif [ "${storage}" = true -a "${lowlatency}" = true ] ; then
    report_failure_with_msg "Cannot combine storage and lowlatency traits"
# Storage and worker don't go together
elif [ "${storage}" = true -a "${worker}" = true ] ; then
    report_failure_with_msg "Cannot combine storage and worker traits"
else
    ilog "Install traits: $traits"
fi

# setup the install type for the log prefix
if [ "${controller}" = true -a "${worker}" = true ] ; then
    aio=true
    prefix="${SYSTEM_TYPE__AIO}"
elif [ "${controller}" = true ] ; then
    prefix="${TRAIT__CONTROLLER}"
elif [ "${worker}" = true ] ; then
    prefix="${TRAIT__WORKER}"
elif [ "${storage}" = true ] ; then
    prefix="${TRAIT__STORAGE}"
fi
if [ "${lowlatency}" = true ] ; then
    prefix="${prefix}-${TRAIT__LOWLATENCY}"
fi

grep -q 'debug_kickstart' /proc/cmdline
if [ $? -eq 0 ]; then
    debug=1
fi

# First, parse /proc/cmdline to find the boot args
set -- `cat /proc/cmdline`
ilog "/proc/cmdline:$*"

# for I in $*; do case "$I" in *=*) eval $I 2>/dev/null;; esac; done
for arg in $*; do
    case "$arg" in
        *=*)
            eval $arg 2>/dev/null
            log "arg : $arg"
            ;;
    esac
done

# Note: This is equivalent to pre_disk_setup_common.cfg

# Name   : check_execs
# Purpose: Confirm all the executables required by the kickstart are present
# Returns: 1 of one or more executable are missing
REQUIRED_EXECS="bc blkid dd lvcreate mkfs.ext4 partprobe pvremove pvs sgdisk vgcreate wipefs"

function check_execs()
{
    missing_exec=0
    for x in ${REQUIRED_EXECS} ; do
        which ${x} > /dev/null 2>&1
        if [ ${?} -ne 0 ] ; then
            elog "dependency check failed ; required '${x}' exec is missing"
            missing_exec=1
        fi
    done
    return ${missing_exec}
}

# Log Traits
[ "${controller}" = true ] && ilog "Controller Function"
[ "${storage}" = true ] && ilog "Storage Function"
[ "${worker}" = true ] && ilog "Worker Function"
[ "${lowlatency}" = true ] && ilog "Low Latency Function"

# Log System Type
if [ ${aio} = true ] ; then
    ilog "system"
else
    ilog "${SYSTEM_TYPE__STANDARD} system"
fi

# Verify that all the required executables are presenty
check_execs
[ $? -ne 0 ] && report_failure_with_msg "Required executables are missing"

####################################################
# pre_common_head  (obsolete with lat)
####################################################
# TODO: The installer does not have 'timezone'
#       Does LAT handle this ?
wlog "timezone not set ; 'timezone --nontp --utc UTC'"
true
%end

####################################################
# prestaging: local installation
####################################################
#
# This code is only executed if "prestage" is set in the command line
# to the kernel.

%ks-early --interpreter=/bin/bash
HOOK_LABEL="ks-early"
. /tmp/lat/ks_functions.sh

# First, parse /proc/cmdline to find the boot args
# Check for prestaging
#

if check_prestage -eq 0 ; then
    ilog "Prestaging for Local Install"

    # The iso label is instboot. To mount the iso, we use
    # /dev/disk/by-label/instboot.
    ISO_DEV=/dev/disk/by-label/instboot
    ISODIR=/run/install/repo

    mkdir -p ${ISODIR}

    # Mount the isofile
    mount "${ISO_DEV}" "${ISODIR}"
    rc=$?
    if [ "${rc}" -ne 0 ]; then
        report_failure_with_msg  "Unable to mount ${ISO_DEV} Error rc=${rc}"
    fi

    local_repo_check_fail=
    # Calculate local checksum and compare
    checksum_file=${ISODIR}/.ostree_repo_checksum
    if [ -f "${checksum_file}" ]; then
        checksum_from_file=$(cat "${checksum_file}")
        ilog "Verifying checksum for prestaged ${ISODIR}/ostree_repo"
        pushd "${ISODIR}" > /dev/null
        checksum=$(find ostree_repo -type f -exec md5sum {} + | LC_ALL=C sort | md5sum | awk '{ print $1; }')
        popd > /dev/null
        if [ "${checksum}" = "${checksum_from_file}" ]; then
            ilog "Verified ostree checksum: ${checksum}"
        else
            elog "ostree checksum failed on ${ISODIR}/ostree_repo"
            elog "Calculated checksum: ${checksum}"
            elog "File checksum:       ${checksum_from_file}"
            local_repo_check_fail=true
        fi
    else
        # No prestage checksum file is available. Use ostree fsck instead.
        # The only problem with this is the length of time required for fsck to complete.
        wlog "No ostree checksum file at ${checksum_file}. Performing ostree fsck instead."
        if ! ostree --repo="${ISODIR}/ostree_repo" fsck; then
            elog "ostree fsck failed on prestaged ${ISODIR}/ostree_repo: reverting to remote pull"
            local_repo_check_fail=true
        fi
    fi
    if [ -n "${local_repo_check_fail}" ]; then
        report_failure_with_msg "ostree integrity check failed on ISO ${ISODIR}/ostree_repo"
    fi

    if [ -e "${ISODIR}/ks-setup.cfg" ]; then
        source "${ISODIR}/ks-setup.cfg"
    fi

    umount ${ISODIR}

    # override the INSTDEV based on the information from ks-setup.cfg
    export INSTDEV="${rootfs_device}"
    export instdev="${rootfs_device}"

    ilog "rootfs device is ${INSTDEV}"

    # Check if force_install is not set. If it is set, then install anyway.
    set -- `cat /proc/cmdline`
    for value in "$@"; do case "$value" in force_install) force_install=${value};; esac; done
    if [ -z "${force_install}" ]; then
        if [ -z "${rootfs_device}" ]; then
            rootfs_device=$(get_disk_dev)
        fi

        orig_rootfs_device=$rootfs_device
        by_path_rootfs_device=$(get_by_path ${rootfs_device})
        if [ -z "${by_path_rootfs_device}" ]; then
            report_failure_with_msg "Device not found: ${orig_rootfs_device}"
        fi

        rootfs_device=$(get_disk ${by_path_rootfs_device})
        ilog "Found rootfs $orig_rootfs_device on: $by_path_rootfs_device->$rootfs_device."

        part_numbers=( $(parted -s ${rootfs_device} print | awk '$1 == "Number" {i=1; next}; i {print $1}') )

        # Get the correct rootfs prefix
        ROOTFS_PART_PREFIX=${rootfs_device}
        # Check if rootfs part is nvme (eg. /dev/nvme0n1). The partitions have a "p" in the part prefix.
        # For example, /dev/nvme0n1p1
        # So we need to add the letter "p" to get the prefix.
        # The part numbers will be used later in the code.
        case ${rootfs_device} in
            *"nvme"*)
            ROOTFS_PART_PREFIX=${ROOTFS_PART_PREFIX}p
            ;;
        esac
        # temporary mount directory
        temp_mount=/mnt/temp_mount
        mkdir -p ${temp_mount}

        ilog "Searching for existing installation..."

        device_list=()
        for part in "${part_numbers[@]}"; do
            device=${ROOTFS_PART_PREFIX}${part}
            device_list+=(${device})
            ilog "Adding ${device}"
        done

        # adding the following device to the device list to search
        # for the filesystem. If Volume Groups have been enabled,
        # it is possible to perform the checks for install_guid below
        # by mounting /dev/cgts-vg/var-lv.
        device_list+=("/dev/cgts-vg/var-lv")
        ilog "Adding /dev/cgts-vg/var-lv"

        for part in "${device_list[@]}"; do
            # mount this part at a temporary mount point
            mount ${device} ${temp_mount}
            if [ $? -ne 0 ]; then
                wlog "Unable to mount ${device}"
                continue
            fi
            # Check for the presence of install_uuid in one of the partitions on
            # the root device
            if [[ -e "${temp_mount}/www/pages/feed/rel-xxxPLATFORM_RELEASExxx/install_uuid" ]]; then
                wlog "Found valid installation on ${device}"
                umount ${temp_mount}
                # Do not modify the system in any way
                report_failure_with_msg "Prestage rejected. Existing installation detected. Please eject the media before rebooting."
            fi
            umount ${temp_mount}
        done
        rm -rf ${temp_mount}
        ilog "Installing Prestaged content. No existing installation found."
    else
        # force install in spite of existing installation
        wlog "Prestage: Force Installing Prestaged content. All existing installations will be lost."
    fi

    # If the size of the Platform Backup partition is greater than 30GB, parted will fail when
    # it tries to reconfigure the partition in a later step. We delete the partition now so that
    # parted succeeds in the later step.

    partition_id=$(parted -s ${rootfs_device} print | awk '/platform_backup/ { print $1; }')
    ilog "Partition id = ${partition_id}"

    # If the partition id is not empty or zero, then the partition actually exists.
    # Delete the partition.
    if [[ "${partition_id}" -ne '' && "${partition_id}" -ne "0" ]]; then
        wlog "Deleting platform backup at partition ${partition_id} on ${rootfs_device}"

        # Delete the platform backup partition
        parted -s ${rootfs_device} rm ${partition_id}
        rc=$?

        if [ "${rc}" -ne 0 ]; then
            report_failure_with_msg "Unable to delete platform backup at partition ${partition_id} on ${rootfs_device}: [exit code ${rc}]"
        else
            ilog "Deleted partition ${partition_id} on ${rootfs_device}"
        fi
    fi
fi

true
%end

# Pre Partition - Pre Disk Setup Common Script
%pre-part --interpreter=/bin/bash
HOOK_LABEL="pre-part"
. /tmp/lat/ks_functions.sh


#####################################################
# From pre_net_common.cfg for system node installs
#####################################################
if is_system_node_install -eq 0 ; then

    # Setup ntp.conf and sync time
    cat <<EOF >/etc/ntp_kickstart.conf
server pxecontroller
EOF

    if [ -e /usr/sbin/ntpd ] ; then
        /usr/sbin/ntpd -g -q -n -c /etc/ntp_kickstart.conf
        rc=$?
        if [ ${rc} -eq 0 ] ; then
            if [ -e /sbin/hwclock ] ; then
                /sbin/hwclock --systohc --utc
                if [ $? -ne 0 ] ; then
                    wlog "failed hwclock command ; /sbin/hwclock --systohc --utc"
                else
                    ilog "ntpd and hwclock set ok"
                fi
            else
                wlog "lat initrd is missing /sbin/hwclock"
            fi
        else
            wlog "ntpd setup failed rc:$rc ; /usr/sbin/ntpd -g -q -n -c /etc/ntp_kickstart.conf"
        fi
    else
        wlog "lat initrd is missing /usr/sbin/ntpd"
    fi
fi

#####################################################
# From pre_disk_setup_common.cfg
#####################################################

if [ -n "$INSTDEV" ] ; then
    instdev_by_path=$(get_by_path $INSTDEV)
    if [ -z ${instdev_by_path} ] ; then
        report_failure_with_msg "invalid install device ${INSTDEV}"
    else
        ilog "Install device: ${INSTDEV} : ${instdev_by_path}"
    fi
fi

# Get all block devices of type disk in the system.
# This includes solid state devices.
# Note: /dev/* are managed by kernel tmpdevfs while links in
#       /dev/disk/by-path/ are managed by udev which updates them
#       asynchronously so avoid using them while performing partition
#       operations.
ilog "Detected storage devices:"
STOR_DEVS=""
for f in /dev/disk/by-path/* ; do
    dev=$(readlink -f $f)
    # dlog "found device ${f}"
    exec_retry 2 0.5 "lsblk --nodeps --pairs $dev" | grep -q 'TYPE="disk"'
    if [ $? -eq 0 ] ; then
        # Filter out ISO disk from storage devices
        check_valid_dev $dev || continue
        STOR_DEVS="$STOR_DEVS $dev"
        ilog "Adding ${f} -> ${dev} to managed device list"
    fi
done

# Filter STOR_DEVS variable for any duplicates as on some systems udev
# creates multiple links to the same device. This causes issues due to
# attempting to acquire a flock on the same device multiple times.
STOR_DEVS=$(echo "$STOR_DEVS" | xargs -n 1 | sort -u | xargs)
ilog "Unique storage devices: $STOR_DEVS"
if [ -z "$STOR_DEVS" ] ; then
    report_failure_with_msg "No storage devices available."
fi

# Lock all devices so that udev doesn't trigger a kernel partition table
# rescan that removes and recreates all /dev nodes for partitions on those
# devices. Since udev events are asynchronous this could lead to a case
# where /dev/ links for existing partitions are briefly missing.
# Missing /dev links leads to command execution failures.
for dev in $STOR_DEVS ; do
    exec {fd}>$dev || report_failure_with_msg "Error creating file descriptor for $dev."
    flock -n "$fd" || report_failure_with_msg "Can't get a lock on fd $fd of device $dev."
    STOR_DEV_FDS="$STOR_DEV_FDS $fd"
    ilog "Locked ${dev} fd:${fd}"
done

# Log info about system state at beginning of partitioning operation
for dev in $STOR_DEVS ; do
    ilog "Initial partition table for $dev is:"
    # log "Initial partition table for $dev is:"
    parted -s $dev unit mib print
    # parted -s $dev unit mib print >> ${LOGFILE}
done

display_volume_info "before"
display_mount_info

# Consider removing since LAT already handles this failure mode
# Ensure specified device is not a USB drive
udevadm info --query=property --name=${INSTDEV} |grep -q '^ID_BUS=usb'
if [ $? -eq 0 ] ; then
    report_failure_with_msg "Specified installation ($INSTDEV) device is a USB drive."
fi

# Log the disk setup
ilog "Volume Groups : ${VOLUME_GROUPS} ; $STOR_DEV_FDS"

# update lvm.conf to prevent udev delays for locked devices
sed -i "s#obtain_device_list_from_udev = 1#obtain_device_list_from_udev = 0#" /etc/lvm/lvm.conf

# Deactivate existing volume groups to avoid Anaconda issues with pre-existing groups
vgs=( $(exec_no_fds "$STOR_DEV_FDS" "vgdisplay -C --noheadings -o vg_uuid 2>/dev/null") )
if [ ${#vgs[@]} -eq 0 ] ; then
    ilog "No volume groups found"
else
    for vg in ${vgs[@]} ; do
        ilog "Disable volume group ${vg}"
        exec_no_fds "$STOR_DEV_FDS" "vgchange -an --select vg_uuid=${vg} 2>/dev/null" 5 0.5
        [ $? -ne 0 ] && report_failure_with_msg "Failed to disable ${vg}."
    done

    for vg in ${vgs[@]} ; do
        vg_name=$(exec_no_fds "$STOR_DEV_FDS" "vgdisplay -C --noheadings --select vg_uuid=${vg} -o vg_name 2>/dev/null" | xargs)

        pvs=( $(exec_no_fds "$STOR_DEV_FDS" "pvs --select vg_uuid=${vg} --noheadings -o pv_name 2>/dev/null" | grep -v unknown) )
        if [ ${#pvs[@]} -ne 0 ] ; then
            ilog "Remove logical volumes from ${vg_name} (${vg})"
            exec_no_fds "$STOR_DEV_FDS" "lvremove --force --select vg_uuid=${vg} 2>/dev/null" 5 0.5 || wlog "WARNING: Failed to remove lvs on ${vg_name} (${vg})."

            for pv in ${pvs[@]} ; do
                ilog "Remove physical volume ${pv} from ${vg_name} (${vg})"
                exec_no_fds "$STOR_DEV_FDS" "pvremove --force --force --yes ${pv} 2>/dev/null" 5 0.5
                [ $? -ne 0 ] && report_failure_with_msg "Failed to remove ${pv}."
            done
        fi

        ilog "Force remove volume group ${vg_name} (${vg})"
        exec_no_fds "$STOR_DEV_FDS" "vgremove --force --select vg_uuid=${vg} 2>/dev/null" 5 0.5
        [ $? -ne 0 ] && report_failure_with_msg "Failed to remove ${vg_name} (${vg})."

    done
fi

display_volume_info "after"
display_mount_info

ONLYUSE_HDD=""

part_type_guid_str="Partition GUID code"
part_type_name_str="Partition name"
part_type_size_str="Partition size"
part_type_first_str="First sector"
part_type_end_str="Last sector"
part_type_flags_str="Attribute flags"

# The /v1/upgrade/${hostname}/in_upgrade endpoint accepts any textual data
# as hostname and returns system-wide upgrade state
hostname="hostname"


if [ "$(curl -sf http://pxecontroller:6385/v1/upgrade/${hostname}/in_upgrade 2>/dev/null)" = "true" ] ; then

    # In an upgrade, only wipe the disk with the rootfs and boot partition
    wlog "In upgrade, wiping only ${INSTDEV}"
    WIPE_HDD=${INSTDEV}
    ONLYUSE_HDD="$(basename ${INSTDEV})"

else

    # Make a list of all the hard drives that are to be wiped.
    # Never put the LAT install disk '${INSTDEV}' in that list.
    WIPE_HDD=""

    # Partition type OSD has a unique globally identifier
    CEPH_OSD_GUID="4FBD7E29-9D25-41B8-AFD0-062C0CEFF05D"
    CEPH_JOURNAL_GUID="45B0969E-9B03-4F30-B4C6-B4B80CEFF106"

    # Check if we wipe OSDs
    if [ "$(curl -sf http://pxecontroller:6385/v1/ihosts/wipe_osds 2>/dev/null)" = "true" ] ; then
        ilog "Wipe OSD data"
        WIPE_CEPH_OSDS="true"
    else
        ilog "Skip Ceph OSD data wipe."
        WIPE_CEPH_OSDS="false"
    fi

    for dev in $STOR_DEVS ; do
        # TODO: Allowing the install dev 'in' results in a failure mode where
        #       every second install fails with the following error string
        #       and unrecoverable mount failure.
        #
        #       Logs:
        #
        #       Warning: The kernel is still using the old partition table.
        #       The new table will be used at the next reboot or after you
        #       run partprobe(8) or kpartx(8)
        #       and then
        #
        #       Failure:
        #
        #       mount: /sysroot: can't find LABEL=otaroot.
        #
        # Action: Find correct place to put partprobe
        #
        # Avoid wiping the install root disk
        # [ ${dev} == ${INSTDEV} ] && continue

        # Avoid wiping USB drives
        udevadm info --query=property --name=$dev |grep -q '^ID_BUS=usb' && continue

        # Avoid wiping ceph osds if sysinv tells us so
        if [ ${WIPE_CEPH_OSDS} == "false" ] ; then
            wipe_dev="true"

            exec_no_fds "$STOR_DEV_FDS" "pvs" | grep -q "$dev *ceph"
            if [ $? -eq 0 ] ; then
                wlog "skip rook provisoned disk $dev"
                continue
            fi

            part_numbers=( `parted -s $dev print | awk '$1 == "Number" {i=1; next}; i {print $1}'` )
            # Scanning the partitions looking for CEPH OSDs and
            # skipping any disk found with such partitions
            for part_number in "${part_numbers[@]}" ; do
                sgdisk_part_info=$(sgdisk -i $part_number $dev)
                part_type_guid=$(echo "$sgdisk_part_info" | grep "$part_type_guid_str" | awk '{print $4;}')
                if [ "$part_type_guid" == $CEPH_OSD_GUID ] ; then
                    wlog "OSD found on $dev, skipping wipe"
                    wipe_dev="false"
                    break
                fi

                exec_no_fds "$STOR_DEV_FDS" "pvs" | grep -q -e "${dev}${part_number} *ceph" -e "${dev}p${part_number} *ceph"
                if [ $? -eq 0 ] ; then
                    wlog "Rook OSD found on $dev$part_number, skip wipe"
                    wipe_dev="false"
                    break
                fi
            done

            if [ "$wipe_dev" == "false" ] ; then
                continue
            fi
        fi

        # Add device to the wipe list
        devname=$(basename $dev)
        if [ -e $dev -a "$ISO_DEV" != "../../$devname" -a "$USB_DEV" != "../../$devname" ] ; then
            ilog "Adding ${dev} to list of disks to be wiped"
            if [ -n "$WIPE_HDD" ] ; then
                ilog "WIPE_HDD=$WIPE_HDD,$dev"
                WIPE_HDD=$WIPE_HDD,$dev
            else
                ilog "WIPE_HDD=$dev"
                WIPE_HDD=$dev
            fi
        fi
    done
    ilog "Not in upgrade"
fi

ilog "==========="
ilog "WIPE DISKs: ${WIPE_HDD}"
ilog "==========="
by_dev=${INSTDEV}
# TODO: Avoid this loop if the INSTDEV does not have by-path in its name
for f in /dev/disk/by-path/* ; do
    if [ "${f}" == "${INSTDEV}" ] ; then
        by_dev=$(get_disk "${INSTDEV}")
        break
    fi
done
for dev in ${WIPE_HDD//,/ } ; do
    ilog "Wiping $dev"

    # Clear previous GPT tables or LVM data on each disk.
    #
    # Rule: Exclude the persistent 'Platform backup' partition.
    # Note: Delete the first few bytes at the start and end of the partition.
    #       This is required with GPT partitions because they save partition
    #       info at both the start and the end of the block.

    # Get a list of partitions for this disk
    part_numbers=( $(parted -s $dev print | awk '$1 == "Number" {i=1; next}; i {print $1}') )

    # For each '/dev/${dev}${part_number} apply wipe rules
    for part_number in "${part_numbers[@]}" ; do
        sgdisk_part_info=$(sgdisk -i $part_number $dev)
        part_name=$(echo "$sgdisk_part_info" | grep "$part_type_name_str" | awk '{print $3;}')

        # special handling for the install device '${INSTDEV}'
        if [ "${dev}" == "${by_dev}" ] ; then

            # Skip over the bios, efi and boot partitions that got us here.
            # LAT handles these partitions
            case ${part_name} in
                "'bios'")
                    ilog "skipping ${part_name} on ${dev}${part_number}"
                    continue
                ;;
                "'otaefi'")
                    ilog "skipping ${part_name} on ${dev}${part_number}"
                    continue
                ;;
                "'otaboot'")
                    ilog "skipping ${part_name} on ${dev}${part_number}"
                    continue
                ;;
                "'otaboot_b'")
                    ilog "skipping ${part_name} on ${dev}${part_number}"
                    continue
                ;;
                *)
                    dlog "wipe candidate ${part_name} on ${dev}${part_number}"
                ;;
            esac
        fi

        # Deal with ssd's which have different partition labelling convention
        part=$dev$part_number
        case $part in
            *"nvme"*)
                part=${dev}p${part_number}
            ;;
        esac

        if [ "${controller}" = true ] ; then
            # Skip if we already found a valid partition, look otherwise
            [ ${BACKUP_PART_FOUND} -eq 1 ] && continue

            ilog "Looking for platform-backup partition on $part from ... instdev=${INSTDEV} device=${by_dev}"
            sgdisk_part_info=$(sgdisk -i $part_number $dev)
            part_type_guid=$(echo "$sgdisk_part_info" | grep "$part_type_guid_str" | awk '{print $4;}')
            if [ "$dev" == "${by_dev}" -a "$part_type_guid" == $BACKUP_PART_GUID ] ; then
                part_type_name=$(echo "$sgdisk_part_info" | grep "$part_type_name_str" | awk '{print $3,$4;}')
                BACKUP_PART_NAME=${part_type_name:1:-1}

                part_type_first=$(echo "$sgdisk_part_info" | grep "$part_type_first_str" | awk '{print $3;}')
                BACKUP_PART_FIRST=${part_type_first}

                part_type_end=$(echo "$sgdisk_part_info" | grep "$part_type_end_str" | awk '{print $3;}')
                BACKUP_PART_END=${part_type_end}

                part_type_size=$(echo "$sgdisk_part_info" | grep "$part_type_size_str" | awk '{print $3;}')
                BACKUP_PART_SIZE=${part_type_size}

                part_type_flags=$(echo "$sgdisk_part_info" | grep "$part_type_flags_str" | awk '{print $3;}')
                BACKUP_PART_FLAGS=${part_type_flags}

                ilog "Discovered persistent backup partition: ${part} [${BACKUP_PART_NAME}:${BACKUP_PART_FIRST}:${BACKUP_PART_END}:${BACKUP_PART_SIZE}:${part_type_guid}]"

                # Only keep a backup partition that is in the expected location
                # and contains a proper filesystem
                if [ "${part_number}" == "${BACKUP_PART_NO}" ] ; then
                    part_fstype=$(exec_retry 5 0.5 "blkid -s TYPE -o value $part")
                    if [ "${part_fstype}" == "ext4" ] ; then
                        ilog "Discovered persistent backup partition, ${part}, is in the expected location and is formatted correctly. Maintaining..."
                        BACKUP_PART_FOUND=1
                        continue
                    else
                        ilog "Discovered persistent backup partition, ${part}, has a missing 'ext4' filesystem . Recreating..."
                    fi
                else
                    # Make sure we only recreate the backup partition on systems that are
                    # known to be invalid. Detect a potential switch in BIOS vs. UEFI and
                    # exit with an appropriate message.
                    ilog "Discovered persistent backup partition, ${part}, is in an unexpected location. Expected: ${BACKUP_PART}."
                    if [ "$USE_UEFI_PARTITIONS" = 0 ] ; then
                        # BIOS boot...
                        if [ "${part_number}" == "${BACKUP_PART_UEFI}" ] ; then
                            # Found a UEFI location for platform backup
                            report_failure_with_msg "BIOS booted system has a persistent backup partition in a UEFI expected location. Wipe disks or boot system in UEFI mode."
                        else
                            ilog "BIOS booted system has an invalid installation. Recreating "
                        fi
                    else
                        # UEFI boot...
                        if [ "${part_number}" == "${BACKUP_PART_BIOS}" ] ; then
                            # Found a BIOS location for platform backup
                            report_failure_with_msg "UEFI booted system has a persistent backup partition in a BIOS expected location. Wipe disks or boot system in BIOS mode."
                        else
                            ilog "UEFI booted system has an invalid installation. Recreating "
                        fi
                    fi
                fi
            fi
        fi

        if [ $WIPE_CEPH_OSDS == "true" -a "$part_type_guid" == $CEPH_JOURNAL_GUID ] ; then
            # Journal partitions require additional wiping. Based on the ceph-manage-journal.py
            # script in the integ repo (at the ceph/ceph/files/ceph-manage-journal.py location)
            # wiping 100MB of data at the beginning of the partition should be enough. We also
            # wipe 100MB at the end, just to be safe.
            ilog "Wiping Ceph ${part_name} on ${part} start and end with dd"
            dd if=/dev/zero of=$part bs=1M count=100 2>/dev/null
            dd if=/dev/zero of=$part bs=1M count=100 seek=$(( `blockdev --getsz $part` / (1024 * 2) - 100 )) 2>/dev/null
        else
            ilog "Wiping ${part_name} on ${part} start and end with dd"
            dd if=/dev/zero of=$part bs=512 count=34 2>/dev/null
            dd if=/dev/zero of=$part bs=512 count=34 seek=$((`blockdev --getsz $part` - 34)) 2>/dev/null
        fi
    done

    if [ ${BACKUP_PART_FOUND} -eq 0 -o "${dev}" != "${by_dev}" ] ; then
        ilog "Creating disk label for $dev"
        parted -s $dev mktable gpt
        ilog "... done"
    fi
done

ilog "Ensure any LAT installer root/boot partitions are zapped/wiped"
for oldrootlabel in otaroot otaroot_1 otaroot_b otaroot_b_1 ; do
    oldrootpart=$(blkid --label $oldrootlabel)
    [ -z "$oldrootpart" ] && continue

    oldinstdev=/dev/$(lsblk $oldrootpart -n -o pkname)
    ilog "... destroying ${oldrootpart} on ${oldinstdev}"

    # sgdisk - Command-line GUID partition table (GPT) manipulator
    # Zap the entire partition
    ilog "... zapping ${oldinstdev}"
    sgdisk -Zo ${oldinstdev}

    # partprobe - inform the OS of partition table changes
    # root@(none):/# partprobe /dev/sda -s
    # /dev/sda: gpt partitions 1 2 3 4 5 6
    ilog "... probing ${oldinstdev}"
    partprobe  ${oldinstdev}

    # wipefs - wipe a signature from a device
    ilog "... wiping  ${oldinstdev}"
    wipefs --all --backup ${oldinstdev}
done

# Override installer variable to not prompt for erasing the disk
export INSTW=0

true
%end

###########################################################################

%part --interpreter=/bin/bash
HOOK_LABEL="part"
. /tmp/lat/ks_functions.sh
ilog "*****************************************"
ilog "***    Partition - Partition Disks    ***"
ilog "*****************************************"

dev=$(get_disk "${INSTDEV}")

###########################################################
# From pre_disk_controller.cfg
###########################################################

function check_partitioning_status() {
    start_sec=$(($end_sec+1))
    part_no=$((part_no+1))
    if [ $start_sec -gt $last ] ; then
        report_failure_with_msg "Disk is not big enough for requested layout (start_sec: $start_sec, last: $last)"
    fi
}

if [ "$BIOSPLUSEFI" = 1 ] ; then
    ilog "BIOSPLUSEFI=1 configuration is requested"
    if [ "${controller}" = true -a "$USE_UEFI_PARTITIONS" = 1 ] ; then
        ilog "WARNING: UEFI booted and installed controllers will NOT have a BIOS MBR partition due to partitioning patterns established in previous releases."
    fi
fi

MIB_BYTES=$((1024*1024))

# Start common partitioning regardless of personality
sgdisk_parts=""

# Get the logical sector size used for determining partition boundaries
LOGICAL_SECTOR_SZ=`lsblk -n ${dev} -o LOG-SEC -d`

# Zap the GPT/MBR information
sgdisk -Z ${dev}

# Get the first aligned sector
first=`sgdisk -F ${dev} | grep -v Creating`

# Get the last aligned sector
export last=$(sgdisk -E ${dev} 2>/dev/null |grep -v Creating)

ilog "Allocate host partitions on ${dev} with first sector: $first and last sector: $last"

# Maintain BIOS partition mappings from previous releases
start_sec=$first
part_no=1
if [ "$USE_UEFI_PARTITIONS" = 0 -o "${controller}" = false ] ; then
    # 1MB size for BIOS boot partition
    BIOSSZ=1
    end_sec=$(($start_sec+(${BIOSSZ}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
    sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:bios -t $part_no:EF02"
    check_partitioning_status
fi

if [ "${controller}" = true ] ; then
    if [ "${aio}" = true ] ; then
        get_aio_controller_provisioning_sizes
        ilog "AIO Controller: MINIMIZING root disk space allocation"
    else
        get_std_controller_provisioning_sizes
        ilog "STD Controller: MAXIMIZING root disk space allocation"
    fi

    # Only controllers have a persistent backup partition
    export BACKUP_SIZE=${BACKUP_DEFAULT_PERSISTENT_SIZE}

    # Check for a bootline override and allocate platform backup partition
    if [ -z "$persistent_size" ]; then
        # Default backup partition size in MiB
        ilog "Platform Backup persistent size not on command line ; defaulting to ${BACKUP_SIZE}"
    else
        if [ ${persistent_size} -lt ${BACKUP_SIZE} ] ; then
            wlog "Cannot set persistent_size smaller than default size of ${BACKUP_SIZE} KB"
        else
            export BACKUP_SIZE=${persistent_size}
        fi
    fi
    ilog "Platform Backup partition size: ${BACKUP_SIZE}"

    if [ ${BACKUP_PART_FOUND} -eq 0 ] ; then
        ilog "Platform Backup partition not detected: CREATING"
    else
        ilog "Platform Backup Partition was detected: PERSISTING"
    fi

    end_sec=$(($start_sec+(${BACKUP_SIZE}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
    sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:${BACKUP_PART_LABEL} -t $part_no:${BACKUP_PART_GUID}"
    check_partitioning_status

elif [ "${worker}" = true ] ; then
    ilog "Setting up platform_pv partition sizes for worker node"
    get_worker_provisioning_sizes
elif [ "${storage}" = true ] ; then
    ilog "Setting up platform_pv partition sizes for storage node"
    get_storage_provisioning_sizes
fi

ilog "PART_SZ_EFI               : ${PART_SZ_EFI}"
ilog "PART_SZ_BOOT              : ${PART_SZ_BOOT}"
ilog "PART_SZ_ROOT              : ${PART_SZ_ROOT}"

# 300 MiB size for EFI boot partition to align with previous releases
end_sec=$(($start_sec+(${PART_SZ_EFI}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:otaefi -t $part_no:EF00"
check_partitioning_status

# Boot/Root OSTree Partition A (Note: OSTree Partition B not used)
if [ "${PART_SZ_BOOT}" != 0 ] ; then
    end_sec=$(($start_sec+(${PART_SZ_BOOT}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
    sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:otaboot"
    check_partitioning_status
fi

if [ "${PART_SZ_ROOT}" != 0 ] ; then
    if [ "$INSTAB" = 0 -a "${INSTFLUX}" = 0 ] ; then
        if [ "$VSZ" = 0 ] ; then
            report_failure_with_msg "Installation with VSZ=0 is not supported."
        else
            end_sec=$(($start_sec+(${PART_SZ_ROOT}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
        fi
        sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:otaroot"
    else
        end_sec=$(($start_sec+(${PART_SZ_ROOT}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
        sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:otaroot"
    fi
    check_partitioning_status
fi

# Flux Partition
if [ "${LV_SZ_VAR}" = 0 -a "${INSTFLUX}" = 1 ] ; then
    if [ "$VSZ" = 0 ] ; then
        report_failure_with_msg "Installation with VSZ=0 is not supported."
    else
        end_sec=$(($start_sec+(${VSZ}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
    fi
    sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:fluxdata"
    check_partitioning_status
fi

# Allocate platform pv
ilog "platform_pv partition - using all remaining disk space"
end_sec=$last
sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:platform_pv -t $part_no:8E00"

STOR_DEVS=$(echo "$STOR_DEVS" | xargs -n 1 | sort -u | xargs)
[ -z "$STOR_DEVS" ] && report_failure_with_msg "No storage devices available."
ilog "STOR_DEV_FDS Updated ; $STOR_DEV_FDS"

dlog "Requesting ${dev} Partition Table: ${a}"
sgdisk $sgdisk_parts -p ${dev}
[ $? -ne 0 ] && report_failure_with_msg "sgdisk failed to create partitions: ${a}"

true
%end

###########################################################################

%mkfs --interpreter=/bin/bash
HOOK_LABEL="mkfs"
. /tmp/lat/ks_functions.sh
ilog "***************************************************"
ilog "***    Mkfs - Format Partitions & LVM Volumes   ***"
ilog "***************************************************"

#######################################################
# From pre_disk_aio
######################################################

vg="volume group"
lv="logical volume"
dev=$(get_disk "${INSTDEV}")

if [ "${controller}" = true ] ; then
    if [ "${aio}" = true ] ; then
        get_aio_controller_provisioning_sizes
    else
        get_std_controller_provisioning_sizes
    fi
elif [ "${worker}" = true ] ; then
    get_worker_provisioning_sizes
elif [ "${storage}" = true ] ; then
    get_storage_provisioning_sizes
fi

fs_dev=$dev
case ${fs_dev} in
    *"nvme"*)
        fs_dev=${fs_dev}p
        ;;
esac

# Maintain BIOS partition mappings from previous releases
part_no=1
if [ "$USE_UEFI_PARTITIONS" = 0 -o "${controller}" = false ] ; then
    # No formating for the BIOS boot partition
    part_no=$((part_no+1))
fi

if [ "${controller}" = true ] ; then
    ilog "BACKUP_SIZE              : ${BACKUP_SIZE}"
    ilog "BACKUP_PART              : ${BACKUP_PART}"
    ilog "BACKUP_PART_NO           : ${BACKUP_PART_NO}"
    ilog "BACKUP_PART_LABEL        : ${BACKUP_PART_LABEL}"
    ilog "BACKUP_PART_GUID         : ${BACKUP_PART_GUID}"

    # Only init Platform Backup partition filesystem if the partition was just created
    if [ ${BACKUP_PART_FOUND} -eq 0 ] ; then
        # Sanity check
        [ "${fs_dev}${part_no}" != "${BACKUP_PART}" ] && report_failure_with_msg "Abort creating platform backup filesystem, unexpected location: ${fs_dev}${part_no}"

        ilog "Platform Backup Partition was CREATED. Initialize filesystem on ${BACKUP_PART}"
        mkfs.ext4 -F -L ${BACKUP_PART_LABEL} ${BACKUP_PART}
        [ ${?} -ne 0 ] && report_failure_with_msg "Failed Platform Backup partition filesystem init ${BACKUP_PART}"
    else
        # Preserving the contents of the backup partition, but make sure it's labeled correctly
        e2label ${BACKUP_PART} ${BACKUP_PART_LABEL}
    fi
    part_no=$((part_no+1))
fi

# Maintain UEFI partition mappings from previous releases
mkfs.vfat -n otaefi ${fs_dev}${part_no}
[ ${?} -ne 0 ] && report_failure_with_msg "Failed UEFI filesystem init: ${fs_dev}${part_no}, rc=${?}"
part_no=$((part_no+1))

# Boot/Root OSTree Partition A (Note: OSTree Partition B not used)
if [ "${PART_SZ_BOOT}" != 0 ] ; then
    mkfs.ext4 -F -L otaboot ${fs_dev}${part_no}
    [ ${?} -ne 0 ] && report_failure_with_msg "Failed Boot filesystem init: ${fs_dev}${part_no}, rc=${?}"
    part_no=$((part_no+1))
fi

if [ "${PART_SZ_ROOT}" != 0 ] ; then
   mkfs.ext4 -F -L otaroot ${fs_dev}${part_no}
   [ ${?} -ne 0 ] && report_failure_with_msg "Failed Root filesystem init: ${fs_dev}${part_no}, rc=${?}"
   part_no=$((part_no+1))
fi

# Flux Partition
if [ "${LV_SZ_VAR}" = 0 -a "${INSTFLUX}" = 1 ] ; then
    mkfs.ext4 -F -L fluxdata ${fs_dev}${part_no}
    [ ${?} -ne 0 ] && report_failure_with_msg "Failed Fluxdata (/var) filesystem init: ${fs_dev}${part_no}, rc=${?}"
    part_no=$((part_no+1))
fi

# Log important LVM config settings
log_lvm_conf "Installer Initial" /etc/lvm/lvm.conf

# Create Volume Group
pv_part=${fs_dev}${part_no}

ilog "Install disk: ${INSTDEV}"
ilog "Current disk: ${dev} ; current partition index:$part_no"
ilog "LV_SZ_LOG     (cgts--vg-log--lv size): ${LV_SZ_LOG} MB"
ilog "LV_SZ_ROOT    (cgts--vg-root--lv)    : ${LV_SZ_ROOT} MB"
ilog "LV_SZ_SCRATCH (cgts--vg-scratch--lv) : ${LV_SZ_SCRATCH} MB"
ilog "LV_SZ_VAR     (cgts--vg-var--lv)     : ${LV_SZ_VAR} MB"

ilog "Wipe any previous signatures from the platform physical volume ${pv_part}"
wipefs -a ${pv_part}
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to wipe signatures from ${pv_part}, rc=${?}"

ilog "Create ${vg} 'cgts-vg' ${pv_part} ; $STOR_DEV_FDS"
exec_no_fds "$STOR_DEV_FDS" "vgcreate -y --force cgts-vg ${pv_part} 2>/dev/null" 5 0.5
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${vg} 'cgts-vg' ${pv_part}"

if [ "${LV_SZ_ROOT}" != 0 ] ; then
   # Create and Init the '/' logical volume
   ilog "Create ${lv} 'root-lv' ; $STOR_DEV_FDS"
   exec_no_fds "$STOR_DEV_FDS" "lvcreate -y -Wy -Zy -n root-lv --size ${LV_SZ_ROOT}MB cgts-vg 2>/dev/null" 5 0.5
   [ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${lv} 'root-lv'"

   ilog "InitFs ${lv} 'root-lv'"
   mkfs.ext4 -F /dev/cgts-vg/root-lv
   [ ${?} -ne 0 ] && report_failure_with_msg "Failed to init ${lv} 'root-lv'"
fi

if [ "${LV_SZ_VAR}" != 0 ] ; then
   # Create and Init the '/' logical volume
   ilog "Create ${lv} 'var-lv' ; $STOR_DEV_FDS"
   exec_no_fds "$STOR_DEV_FDS" "lvcreate -y -Wy -Zy -n var-lv --size ${LV_SZ_ROOT}MB cgts-vg 2>/dev/null" 5 0.5
   [ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${lv} 'root-lv'"

   ilog "InitFs ${lv} 'var-lv'"
   mkfs.ext4 -F /dev/cgts-vg/var-lv
   [ ${?} -ne 0 ] && report_failure_with_msg "Failed to init ${lv} 'root-lv'"
fi

# Create and Init the '/var/log' logical volume
ilog "Create ${lv} 'log-lv' ; $STOR_DEV_FDS"
exec_no_fds "$STOR_DEV_FDS" "lvcreate -y -Wy -Zy -n log-lv --size ${LV_SZ_LOG}MB cgts-vg 2>/dev/null" 5 0.5
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${lv} 'log-lv'"

ilog "InitFs ${lv} 'log-lv'"
mkfs.ext4 -F /dev/cgts-vg/log-lv
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to init ${lv} 'log-lv'"

# Create and init the '/scratch' logical volume
ilog "Create ${lv} 'scratch-lv' ; $STOR_DEV_FDS"
exec_no_fds "$STOR_DEV_FDS" "lvcreate -y -Wy -Zy -n scratch-lv --size ${LV_SZ_SCRATCH}MB cgts-vg 2>/dev/null" 5 0.5
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${lv} 'scratch-lv'"

ilog "InitFs ${lv} 'scratch-lv'"
mkfs.ext4 -F /dev/cgts-vg/scratch-lv
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to init ${lv} 'scratch-lv'"

#######################################################################
# From post_lvm_on_rootfs.cfg  (all hosts)
#######################################################################

# uncomment the global_filter line in lvm.conf
perl -0777 -i.bak -pe 's:(# This configuration option has an automatic default value\.\n)\t# global_filter:$1        global_filter:m' /etc/lvm/lvm.conf
perl -0777 -i -pe 's:(# Example\n)\t# preferred_names:$1        preferred_names:m' /etc/lvm/lvm.conf

# Get the LVM disk partition and add it to the lvm.conf file
export LV_ROOTDISK=$(exec_no_fds "$STOR_DEV_FDS" "pvdisplay --select 'vg_name=cgts-vg' -C -o pv_name --noheadings" | xargs)
[ -z ${LV_ROOTDISK} ] && report_failure_with_msg "Failed to identify logical volume rootdisk via pvdisplay"

# Edit the LVM config so LVM only looks for LVs on ${LV_ROOTDISK}
ilog "Edit the LVM config so LVM only looks for LVs on the root disk"
sed -i "s#^\( *\)global_filter = \[.*#\1global_filter = [ \"a|${LV_ROOTDISK}|\", \"r|.*|\" ]#" /etc/lvm/lvm.conf

# Log important LVM config settings
log_lvm_conf "Installer Updated" /etc/lvm/lvm.conf

#####################################################################
# From pre_disk_setup_tail.cfg
#####################################################################

# Close all FDs and wait for udev to reshuffle all partitions.
ilog "Releasing storage device locks and FDs."
for fd in $STOR_DEV_FDS
do
    flock -u "$fd"
    exec {fd}>&-
done
sleep 2
udevadm settle --timeout=300 || report_failure_with_msg "udevadm settle failed"

#lsblk -o name,mountpoint,label,size,uuid

# Rescan LVM cache to avoid warnings for VGs that were recreated.
pvscan --cache 2>/dev/null

# Stage the ostree_repo in /sysroot for network installations
# of controller nodes. Doing so avoids a double ostree pull of
# the huge ostree_repo over the network.
if is_usb_install -eq 0 ; then

    ilog "USB Install"

else

    ilog "Network Install"

    ##################################################################
    #
    # System node installs of worker and storage nodes are installed
    # over the network rather than from a staged archive.
    # This is because these node types do not have/need a local feed.
    #
    ##################################################################

    if [ "${controller}" = true ] ; then

        ilog "Controller Install"

        ##############################################################
        #
        # Controller node network installs pull the ostree_repo from
        # the pxeboot server's feed directory in 'archive' mode into
        # /sysroot as a local staging location. In this case LAT's
        # INSTL (install) variable is updated to install from that
        # local stage.
        #
        # This is done to avoid a second (double) ostree_repo pull
        # over the network that would otherwise be needed to populate
        # the controller's feed directory.
        #
        # This staged ostree_repo archive is later moved to the
        # controller's feed directory to be used for future installs
        # of other system nodes from this controller.
        #
        ##############################################################

        ilog "OSTREE_ROOT_DEVICE: ${OSTREE_ROOT_DEVICE}"
        ilog "OSTREE_VAR_DEVICE : ${OSTREE_VAR_DEVICE}"

        PHYS_SYSROOT="/sysroot"
        mkdir -p ${PHYS_SYSROOT}
        mount -o rw,noatime "${OSTREE_ROOT_DEVICE}" "${PHYS_SYSROOT}" || elog "Error mounting ${OSTREE_ROOT_DEVICE}"

        repo="${PHYS_SYSROOT}/var/www/pages/feed/rel-xxxPLATFORM_RELEASExxx/ostree_repo"
        mkdir -p "${repo}"

        # Tell LAT to install from this local stage
        # i.e. override where LAT installs from.
        export instl=${repo}
        export INSTL=${instl}

        ostree --repo=${repo} init --mode=archive
        if [ "${insturl}" = "file://NOT_SET" ] ; then
            ilog "ostree_repo archive pull from file:///instboot/ostree_repo"
            ostree --repo=${repo} remote add ${instbr} file:///instboot/ostree_repo
        else
            ilog "ostree_repo archive pull from ${insturl}"
            ostree --repo=${repo} remote add ${instbr} ${insturl}
        fi

        ilog "Executing: ostree --repo=${repo} pull --depth=-1 --mirror ${instbr}:${instbr}"
        ostree --repo=${repo} pull --depth=-1 --mirror ${instbr}:${instbr}
        rc=$?
        if [ $rc -ne 0 ]; then
            report_failure_with_msg "ostree pull failed, rc=$rc"
        fi

        umount ${PHYS_SYSROOT}

    fi
fi

# Important: To align with installer expectations of where otaefi will reside,
# reset the value of p1
if [ "${controller}" = true ] ; then
    if [ "$USE_UEFI_PARTITIONS" = 0 ] ; then
        # BIOS firmware execution
        #  Number  Start (sector)    End (sector)  Size       Code  Name
        #     1            2048            4095   1024.0 KiB  EF02  bios
        #     2            4096        61444095   29.3 GiB    FFFF  platform_backup
        #     3        61444096        62058495   300.0 MiB   EF00  otaefi
        #
        p1=3
    else
        # UEFI firmware execution
        #  Number  Start (sector)    End (sector)  Size       Code  Name
        #     1            2048        61442047   29.3 GiB    FFFF  platform_backup
        #     2        61442048        62056447   300.0 MiB   EF00  otaefi
        p1=2

        # LAT installer will attempt to write the legacy BIOS grub information
        # after exiting from this hook. Skip it, in this case, as we don't have
        # a BIOS boot partition
        export BIOSPLUSEFI=0
    fi
elif [ "${worker}" = true -o "${storage}" = true ] ; then
        # UEFI and BIOS firmware execution
        # Number  Start (sector)    End (sector)  Size       Code  Name
        #    1            2048            4095   1024.0 KiB  EF02  bios
        #    2            4096          618495   300.0 MiB   EF00  otaefi
        p1=2
fi

true
%end

###########################################################################

%post --interpreter=/bin/bash
HOOK_LABEL="post"
. /tmp/lat/ks_functions.sh
ilog "*********************************************************"
ilog "****    Post - Add user/groups                         **"
ilog "*********************************************************"

# Set password for root to 'root'
# usermod -p '$6$hEv/K.fPeg/$ezIWhJPrMG3WtdEwqQRdyBwdYmPZkqW2PONFAcDd6TqWliYc9dHAwW4MFTlLanVH3/clE0/34FheDMpbAqZVG.' root

# To enable root password
# 1. Uncomment set root password command above
# 2. Comment out 'passwd -l root' command below

# Lock the root password
passwd -l root

# Remove admin user whether it exists or not
deluser admin || true

# Create the sysadmin user
useradd sysadmin -m --shell /bin/bash -G sudo --password 4SuW8cnXFyxsk
chage -d 0 sysadmin

# add 'nobody' group
groupadd nobody

# Reload /etc/group- to make systemd-sysusers.service happy
/usr/sbin/grpconv || report_failure_with_msg "Failed to convert from shadow passwords and groups"
%end

%post --interpreter=/bin/bash
HOOK_LABEL="post"
. /tmp/lat/ks_functions.sh
ilog "*********************************************************"
ilog "***    Post - Traits & Platform Config File update    ***"
ilog "*********************************************************"

# Set node traits' state
[ "${controller}" = true ] && ilog "Controller Function"
[ "${storage}" = true ] && ilog "Storage Function"
[ "${worker}" = true ] && ilog "Worker Function"
[ "${lowlatency}" = true ] && ilog "Low Latency Function"
[ "${controller}" = true -a ${worker} = true ] && aio=true

# Parse traits to nodetype, subfunction and system_type
# -----------------------------------------------------

# Set nodetype from traits
if [ "${controller}" = true ] ; then
    nodetype=${TRAIT__CONTROLLER}
elif [ "${storage}" = true ] ; then
    nodetype=${TRAIT__STORAGE}
elif [ "${worker}" = true ] ; then
    nodetype=${TRAIT__WORKER}
fi
ilog "nodetype=${nodetype}"

# Set system type and subfunction
subfunction=""
system_type=""
[ "${controller}" = true -a "${worker}" = true ] && aio=true
if [ "${aio}" = true ] ; then
    ilog "${SYSTEM_TYPE__AIO} System"
    system_type="${SYSTEM_TYPE__AIO}"
    subfunction="${SUBFUNCTION__AIO}"
    if [ "${lowlatency}" = true ] ; then
        ilog "Setting aio lowlatency"
        ln -s /usr/share/systemd-presets/lowlatency.preset /etc/systemd/system-preset/10-aio.preset
    else
        ln -s /usr/share/systemd-presets/aio.preset /etc/systemd/system-preset/10-aio.preset
    fi
else
    ilog "${SYSTEM_TYPE__STANDARD} System"
    system_type="${SYSTEM_TYPE__STANDARD}"
    if [ "${worker}" = true ] ; then
        subfunction=${SUBFUNCTION__WORKER}
        if [ "${lowlatency}" = true ] ; then
            ilog "Setting ${SUBFUNCTION__WORKER} lowlatency"
            ln -s /usr/share/systemd-presets/worker-lowlatency.preset /etc/systemd/system-preset/10-${SUBFUNCTION__WORKER}.preset
        else
            ln -s /usr/share/systemd-presets/worker.preset /etc/systemd/system-preset/10-${SUBFUNCTION__WORKER}.preset
        fi
    elif [ "${storage}" = true ] ; then
        subfunction=${SUBFUNCTION__STORAGE}
        ilog "Setting ${SUBFUNCTION__STORAGE} preset"
        ln -s /usr/share/systemd-presets/storage.preset /etc/systemd/system-preset/10-${SUBFUNCTION__STORAGE}.preset
    else
        subfunction=${SUBFUNCTION__CONTROLLER}
        ilog "Setting ${SUBFUNCTION__CONTROLLER} preset"
        ln -s /usr/share/systemd-presets/controller.preset /etc/systemd/system-preset/10-${SUBFUNCTION__CONTROLLER}.preset
    fi
fi

if [ "${lowlatency}" = true ] ; then
    subfunction="${subfunction},${TRAIT__LOWLATENCY}"
fi

ilog "subfunction=${subfunction}"
ilog "system_type=${system_type}"

#################################################################
# From post_platform_conf_controller.cfg
# From post_platform_conf_aio.cfg
# From post_platform_conf_aio_lowlatency.cfg
#################################################################

ilog "create platform.conf and set personality traits"
[ ! -d "/etc/platform" ] && mkdir -p -m 0775 /etc/platform
cat <<EOF > ${PLATFORM_CONF}
nodetype=${nodetype}
subfunction=${subfunction}
system_type=${system_type}
EOF

ilog "Create systemd presets and set personality traits"
systemctl daemon-reload
systemctl --preset-mode=full preset-all

##############################################################
# From post_pxeboot_controller
# From post_net_common.cfg
# ############################################################
# Set http port
# Persist the default http port number to platform configuration.
# This will get overwritten when by manifest during sw configuration phase.
if [[ "${insturl}" == *"pxecontroller"* && "${insturl}" == *"http"* ]] ; then
    http_port=$(echo $(cat /proc/cmdline |xargs -n1 echo |grep '^insturl=' | sed -r 's#^[^/]*://[^/]*:([0-9]*)/.*#\1#'))
else
    http_port=8080
fi
update_platform_conf "http_port=${http_port}"

#############################################################
# From post_common.cfg   (all hosts)
#############################################################

rm /etc/hostname

# TODO: is this needed with LAT ??
# If using a serial install make sure to add a getty on the tty1
conarg=`cat /proc/cmdline |xargs -n1 echo |grep console= |grep ttyS`
if [ -n "$conarg" ] ; then
    echo "1:2345:respawn:/sbin/mingetty tty1" >> /etc/inittab
fi

blkid >> ${LOGFILE}

# TODO: See if other post_common.cfg content is needed

true
%end

###########################################################################

%post --interpreter=/bin/bash
HOOK_LABEL="post"
. /tmp/lat/ks_functions.sh
ilog "*************************************"
ilog "***    Post - Set Kernel Args     ***"
ilog "*************************************"

###########################################################
# From post_kernel_controller.cfg
# From post_kernel_aio_worker.cfg
###########################################################

. /etc/platform/platform.conf

# Prepare the disk boot kernel comand line
# ----------------------------------------
KERN_OPTS="${KERNEL_PARAMS}"
ilog "Building up KERN_OPTS: ${KERN_OPTS}"

function add_kernel_option()
{
    option="${1}"
    ilog "... adding: ${option}"

    # avoid adding leading space on first option
    if [ "${KERN_OPTS}" = "" ] ; then
        KERN_OPTS="${option}"
    else
        KERN_OPTS="${KERN_OPTS} ${option}"
    fi
}

# If the installer asked us to use security related kernel params, use
# them in the grub line as well (until they can be configured via puppet)
security_feature=""

# Handle security options
# TODO: Create a list and loop over it
security_options="nopti nospectre_v2 nospectre_v1"
for o in ${security_options}
do
    grep -q ${o} /proc/cmdline
    if [ $? -eq 0 ]; then
        add_kernel_option "${o}"
        if [ "${security_feature}" = "" ] ; then
            security_feature="${o}"
        else
            security_feature="${security_feature} ${o}"
        fi
    fi
done

[ "${KERN_OPTS}" != "" ] && ilog "Learned kernel params: ${KERN_OPTS}"

ilog "Adding kernel options"
if [ "${aio}" = true -o "${worker}" = true ] ; then

    if [ -e /etc/init.d/cpumap_functions.sh ] ; then

        # Update grub with custom kernel bootargs
        source /etc/init.d/cpumap_functions.sh

        n_cpus=$(cat /proc/cpuinfo 2>/dev/null | \
          awk '/^[pP]rocessor/ { n +=1 } END { print (n>0) ? n : 1}')
        ilog "cpumap: n_cpus:${n_cpus}"

        n_numa=$(ls -d /sys/devices/system/node/node* 2>/dev/null | wc -l)
        ilog "cpumap: n_numa:${n_numa}"

        KERN_OPTS="${KERN_OPTS} iommu=pt"
        KERN_OPTS="${KERN_OPTS} hugepagesz=2M hugepages=0 default_hugepagesz=2M"

        # If this is an all-in-one system, we need at least 4 CPUs
        if [ "${aio}" = true -a ${n_cpus} -lt 4 ]; then
            report_failure_with_msg "At least 4 CPUs are required for ${SYSTEM_TYPE__AIO} node."
        fi

        # Add kernel options for cpu isolation / affinity
        if [ ${n_cpus} -gt 1 ] ; then

            base_cpulist=$(platform_expanded_cpu_list)
            ilog "cpumap: base_cpulist: ${base_cpulist}"

            base_cpumap=$(cpulist_to_cpumap ${base_cpulist} ${n_cpus})
            ilog "cpumap: base_cpumap: ${base_cpumap}"

            avp_cpulist=$(vswitch_expanded_cpu_list)
            ilog "cpumap: avp_cpulist:${avp_cpulist}"
            if [ -e /etc/vswitch/vswitch.conf ] ; then
                # Update vswitch.conf
                sed -i "s/^VSWITCH_CPU_LIST=.*/VSWITCH_CPU_LIST=\"${avp_cpulist}\"/" /etc/vswitch/vswitch.conf
            else
                wlog "Missing /etc/vswitch/vswitch.conf ; update bypassed"
            fi

            norcu_cpumap=$(invert_cpumap ${base_cpumap} ${n_cpus})
            ilog "cpumap: norcu_cpumap:${norcu_cpumap}"

            norcu_cpulist=$(cpumap_to_cpulist ${norcu_cpumap} ${n_cpus})
            ilog "cpumap: norcu_cpulist:${norcu_cpulist}"

            if [ "${lowlatency}" = true ]; then
                KERN_OPTS="${KERN_OPTS} nohz_full=${norcu_cpulist}"
            fi

            KERN_OPTS="${KERN_OPTS} rcu_nocbs=${norcu_cpulist}"
            KERN_OPTS="${KERN_OPTS} kthread_cpus=${base_cpulist}"
            KERN_OPTS="${KERN_OPTS} irqaffinity=${norcu_cpulist}"
        fi
    else
        wlog "Missing /etc/init.d/cpumap_functions.sh ; cpumap setup bypassed"
    fi

    # Add kernel options to set NMI watchdog
    if [ "${lowlatency}" = true ] ; then
        add_kernel_option "nmi_watchdog=0 softlockup_panic=0"
    else
        add_kernel_option "nmi_watchdog=panic,1 softlockup_panic=1"
    fi

    if [[ "$(dmidecode -s system-product-name)" =~ ^ProLiant.*Gen8$ ]]; then
        add_kernel_option "intel_iommu=on,eth_no_rmrr"
    else
        add_kernel_option "intel_iommu=on"
    fi

    # Add kernel options to disable kvm-intel.eptad on Broadwell
    # Broadwell: Model: 79, Model name: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz
    if grep -q -E "^model\s+:\s+79$" /proc/cpuinfo
    then
        add_kernel_option "kvm-intel.eptad=0"
    fi

    # Add kernel option to avoid jiffies_lock contention on real-time kernel
    if [ "${lowlatency}" = true ] ; then
        add_kernel_option "skew_tick=1"
    fi

elif [ "${controller}" = true ] ; then

    ilog "Adding ${TRAIT__CONTROLLER} function kernel options"

    ## Custom kernel options
    add_kernel_option "intel_iommu=off usbcore.autosuspend=-1"

    ## Setup the loop module to support up to 15 partitions so that we
    ## can enable the customer to manually resize images if needed.
    ##
    add_kernel_option "loop.max_part=15"


    # Add kernel options to ensure NMI watchdog is enabled, if supported
    add_kernel_option "nmi_watchdog=panic,1 softlockup_panic=1"

elif [ "${storage}" = true ] ; then

    ilog "Adding ${TRAIT__STORAGE} function kernel options"

    ## Custom kernel options
    add_kernel_option "intel_iommu=off usbcore.autosuspend=-1"

    # Add kernel options to ensure NMI watchdog is enabled, if supported
    add_kernel_option "nmi_watchdog=panic,1 softlockup_panic=1"
fi

#########################################################################################
# From post_kernel_aio_and_worker.cfg
# From post_kernel_controller.cfg
# From post_kernel_storage.cfg
#########################################################################################

# Add kernel options to ensure an selinux is disabled for all node types
add_kernel_option "selinux=0 enforcing=0"

# Add kernel option to panic on a softdog timeout
add_kernel_option "softdog.soft_panic=1"

# Make sure that we are using cgroups v1
add_kernel_option "systemd.unified_cgroup_hierarchy=0"

# k8s updates
add_kernel_option "user_namespace.enable=1"

# Add kernel option to disable biosdevname if enabled
# As this may already be in GRUB_CMDLINE_LINUX, only add if it is not already present
grep -q '^GRUB_CMDLINE_LINUX=.*biosdevname=0' /etc/default/grub
if [ $? -ne 0 ]; then
    add_kernel_option "biosdevname=0"
fi

########################################################################################

ilog "Adding these kernel params to disk boot: ${KERN_OPTS}"
if [ -n "${KERN_OPTS}" ] ; then
    grep -q "^kernel_params=" /boot/efi/EFI/BOOT/boot.env
    if [ ${?} -ne 0 ]; then
        # Add line
        sed -i "1 a kernel_params=${KERN_OPTS}" /boot/efi/EFI/BOOT/boot.env
    else
        # Update existing
        sed -i "s/^kernel_params=.*/kernel_params=${KERN_OPTS}/" /boot/efi/EFI/BOOT/boot.env
    fi
else
    wlog "no kernel options added"
fi

ilog "Override LAT grub file"
GRUB_PATH_N_FILE="/boot/efi/EFI/BOOT/grub.cfg"
if [ ! -e ${GRUB_PATH_N_FILE}.lat ] ; then
    mv ${GRUB_PATH_N_FILE} ${GRUB_PATH_N_FILE}.lat
    cp /var/pxeboot/pxelinux.cfg.files/grub.cfg.stx ${GRUB_PATH_N_FILE}
fi

######################################################################
# From post_system_aio
######################################################################
TEMPLATE_FILE="/usr/share/worker-utils/config/worker_reserved.conf"
TARGET_FILE="/etc/platform/worker_reserved.conf"
if [ "${aio}" = true ] ; then

    ## Reserve more memory for base processes since the controller has higher
    ## memory requirements but cap it to better handle systems with large
    ## amounts of memory
    TOTALMEM=$(grep MemTotal /proc/meminfo | awk '{print int($2/1024)}')
    ilog "${SYSTEM_TYPE__AIO} MemTotal:${TOTALMEM}"

    if [ -e /sys/devices/system/node/node0 ]; then
        RESERVEDMEM=$(grep MemTotal /sys/devices/system/node/node0/meminfo | awk '{printf "%d\n", $4/1024}')
    else
        RESERVEDMEM=$(grep MemTotal /proc/meminfo | awk '{print int($2/1024/4)}')
    fi

    if [ ${RESERVEDMEM} -lt 6144 ]; then
        RESERVEDMEM=6144
    elif [ ${RESERVEDMEM} -gt 14500 ]; then
        RESERVEDMEM=14500
    elif [ ${RESERVEDMEM} -gt 8192 ]; then
        RESERVEDMEM=8192
    fi

    # Normally we would set personality based files later
    # But we need to copy worker_reserved.conf now since it needs to be modified for AIO
    ilog "${SYSTEM_TYPE__AIO} Reserved Memory: ${RESERVEDMEM}"
    if [ ! -e "${TEMPLATE_FILE}" ] ; then
        report_failure_with_msg "Cannot configure worker cpu/memory ; missing ${TEMPLATE_FILE}"
    fi
    cp "${TEMPLATE_FILE}" "${TARGET_FILE}"
    if [ ! -e "${TARGET_FILE}" ] ; then
        report_failure_with_msg "Cannot configure worker cpu/memory ; missing ${TARGET_FILE}"
    fi
    sed -i -e "s#\(WORKER_BASE_RESERVED\)=.*#\1=(\"node0:${RESERVEDMEM}MB:1\" \"node1:2000MB:0\" \"node2:2000MB:0\" \"node3:2000MB:0\")#g" "${TARGET_FILE}"
    if [ $? -ne 0 ] ; then
        report_failure_with_msg "Cannot configure worker cpu/memory ; previous sed search and replace request failed"
    fi
    worker_reserved=$(grep WORKER_BASE_RESERVED "${TARGET_FILE}")
    ilog "${SYSTEM_TYPE__AIO} '${worker_reserved}'"

    # Update WORKER_CPU_LIST
    N_CPUS=$(cat /proc/cpuinfo 2>/dev/null | awk '/^[pP]rocessor/ { n +=1 } END { print (n>0) ? n : 1}')
    sed -i "s/^WORKER_CPU_LIST=.*/WORKER_CPU_LIST=\"0-$((N_CPUS-1))\"/" "${TARGET_FILE}"

    worker_cpu_list=$(grep WORKER_CPU_LIST "${TARGET_FILE}")
    ilog "${SYSTEM_TYPE__AIO} '${worker_cpu_list}'"
elif [ "${worker}" = true ] ; then
    # Keep logic contained and copy worker_reserved.conf now since we need
    # to do the copy for AIO above
    ilog "Enable ${TARGET_FILE} for ${TRAIT__WORKER}"
    if [ ! -e "${TEMPLATE_FILE}" ] ; then
        report_failure_with_msg "Cannot configure worker cpu/memory ; missing ${TEMPLATE_FILE}"
    fi
    cp "${TEMPLATE_FILE}" "${TARGET_FILE}"
    if [ ! -e "${TARGET_FILE}" ] ; then
        report_failure_with_msg "Cannot configure worker cpu/memory ; missing ${TARGET_FILE}"
    fi
fi

true
%end

###########################################################################

%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh

ilog "************************************"
ilog "***    Post - Interface Setup    ***"
ilog "************************************"

###########################################################
# From post_pxeboot_controller
# From post_net_common.cfg
###########################################################

# TODO: Not needed on a USB install.
# TODO: Need to adjust fault handling or condition on USB install.

# Obtain the boot interface from the PXE boot
BOOTIF=$(cat /proc/cmdline |xargs -n1 echo |grep BOOTIF=)
BOOTIF=${BOOTIF#BOOTIF=}
mgmt_dev=lo
mgmt_vlan=0
if [ -n "$BOOTIF" ] ; then
    BOOTIF=$(echo $BOOTIF | sed -r -e 's/.*(..-..-..-..-..-..)$/\1/' -e 's/-/:/g')
    ndev=`ip link show |grep -B 1 $BOOTIF |head -1 |awk '{print $2}' |sed -e 's/://'`
    if [ -n "$ndev" ] ; then
        # convert to predictive name
        mgmt_dev=$(get_iface_from_ethname $ndev)
        if [ "${mgmt_dev}" == "" ] ; then
            report_failure_with_msg "failed to get predictive altname from ${ndev}"
        fi
        # get vlan info for system node installs
        if is_system_node_install -eq 0 ; then
            # Retrieve the management VLAN from sysinv if it exists
            ilog "Querying system inventory for management vlan id"
            mgmt_vlan=`curl -sf http://pxecontroller:6385/v1/isystems/mgmtvlan`
            rc=$?
            if [ ${rc} -ne 0 ] ; then
                report_failure_with_msg "Unable to communicate with System Inventory REST API. Aborting installation. rc:${rc}"
            fi
            ilog "Management Interface: ${ndev} -> ${mgmt_dev} -> vlan${mgmt_vlan}"
        else
            ilog "Management Interface: ${ndev} -> ${mgmt_dev}"
        fi
    else
        report_failure_with_msg "Unable to determine mgmt interface from BOOTIF=$BOOTIF."
    fi
else
    wlog "BOOTIF is not set. Unable to determine mgmt interface."
fi

ilog "mgmt_dev : $mgmt_dev"
ilog "mgmt_vlan: $mgmt_vlan"

if [ ! -e "${IMAGE_ROOTFS}/etc/network/interfaces" ] ; then
cat << EOF >> ${IMAGE_ROOTFS}/etc/network/interfaces
# This file describes the network interfaces available on the system
# and how to activate them. For more information , see interfaces(5)
source ${IMAGE_ROOTFS}/etc/network/interfaces.d/*
EOF
fi

if [ ! -d "${IMAGE_ROOTFS}/etc/network/interfaces.d" ] ; then
    mkdir -p -m 0775 ${IMAGE_ROOTFS}/etc/network/interfaces.d
fi

ilog "Setup network scripts"

if [ $mgmt_vlan -eq 0 ] ; then

    # Persist the boot device to the platform configuration. This will get
    # overwritten later if the management_interface is on a bonded interface.
    update_platform_conf "management_interface=$mgmt_dev"

    # Build networking scripts
    cat << EOF > ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-lo
auto lo
iface lo inet loopback
EOF

if [ $mgmt_dev != "lo" ]; then
    ilog "Creating ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-$mgmt_dev"
    cat << EOF > ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-$mgmt_dev
auto $mgmt_dev
iface $mgmt_dev inet dhcp
    post-up  echo 0 > /proc/sys/net/ipv6/conf/lo/autoconf; echo 0 > /proc/sys/net/ipv6/conf/lo/accept_ra; echo 0 > /proc/sys/net/ipv6/conf/lo/accept_redirects
EOF
fi

else  # vlan
    ilog "Configuring vlan: mgmt_iface=vlan$mgmt_vlan"

    # Check whether to use inet or inet6
    ipv6_addr=$(dig +short AAAA controller)
    if [[ -n "$ipv6_addr" ]]
    then
        mgmt_address_family=inet6
        ipv6init=yes
        dhcpv6c=yes
    else
        mgmt_address_family=inet
        ipv6init=no
        dhcpv6c=no
    fi

    # Persist the boot device to the platform configuration. This will get
    # overwritten later if the management_interface is on a bonded interface.
    update_platform_conf "management_interface=vlan$mgmt_vlan"

    # Build networking scripts
    cat << EOF > ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-lo
auto lo
iface lo $mgmt_address_family loopback
EOF

    cat << EOF > ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-$mgmt_dev
auto $mgmt_dev
iface $mgmt_dev $mgmt_address_family manual
    post-up  echo 0 > /proc/sys/net/ipv6/conf/$mgmt_dev/autoconf; echo 0 > /proc/sys/net/ipv6/conf/$mgmt_dev/accept_ra; echo 0 > /proc/sys/net/ipv6/conf/$mgmt_dev/accept_redirects
EOF

    cat << EOF > ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-vlan$mgmt_vlan
auto vlan$mgmt_vlan
iface vlan$mgmt_vlan $mgmt_address_family dhcp
    vlan-raw-device $mgmt_dev
    post-up  echo 0 > /proc/sys/net/ipv6/conf/vlan$mgmt_vlan/autoconf; echo 0 > /proc/sys/net/ipv6/conf/vlan$mgmt_vlan/accept_ra; echo 0 > /proc/sys/net/ipv6/conf/vlan$mgmt_vlan/accept_redirects
EOF

    # Reject DHCPOFFER from DHCP server that doesn't send
    # wrs-install-uuid option
    echo "require wrs-install-uuid;" >>/etc/dhcp/dhclient.conf
    echo "require dhcp6.wrs-install-uuid;" >>/etc/dhcp/dhclient.conf
    # set the same DUID-LL IDs (see RFC 8415) that will be used during regular operations
    echo "send dhcp6.client-id = concat(00:03:00, hardware);" >>/etc/dhcp/dhclient.conf
    echo "send dhcp-client-identifier = concat(00:03:00, hardware);" >>/etc/dhcp/dhclient.conf

    # Bring up the mgmt vlan so that a dhcp lease is acquired and an address is
    # setup prior to the post-install reboot.  This is so that the timing of the IP
    # address allocation is similar to how normal/non-pxe installation works.
    mgmt_iface=vlan$mgmt_vlan
    ilog "mgmt_iface=vlan$mgmt_vlan"
    ilog "mgmt_address_family: $mgmt_address_family"

    dhclient_family=$([[ $mgmt_address_family == "inet" ]] && echo -4 || echo -6)
    ilog "dhclient_family: $dhclient_family"
    ilog "ip link add link $mgmt_dev name $mgmt_iface type vlan id $mgmt_vlan"

    ip link add link $mgmt_dev name $mgmt_iface type vlan id $mgmt_vlan

    ilog "ip link set up dev $mgmt_iface"
    ip link set up dev $mgmt_iface

    timeout_value=60
    dhclient_request="/usr/sbin/dhclient $dhclient_family $mgmt_iface"
    ilog "timeout ${timeout_value} ${dhclient_request}"
    timeout ${timeout_value} ${dhclient_request}
    rc=${?}
    if [ ${rc} -ne 0 ] ; then
        wlog "timeout ${timeout_value} ${dhclient_request} failed ; rc:${rc}"
    else
        ilog "${dhclient_request} complete"
    fi
fi

# Clean machine-id file, it needs to be generated after install.
# It must be unique per installation because it is used to generate
# random MACs for SR-IOV VFs, among other resources.
find / -name machine-id | xargs rm -fv

true
%end

##########################################################################

%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh
ilog "*********************************************************"
ilog "***  Post Nochroot - Kickstart Finalize Install UUID  ***"
ilog "*********************************************************"

# Create a uuid specific to this installation
# install_uuid under /var needs to match what is written to /etc/platform/platform.conf
# When instflux=0 (/var not on a dedicated fluxdata partition)
# When instflux=1 (/var is part of the two different sysroot deployments).
# Therefore check if the file has been written and use that, otherwise generate it
feed="${IMAGE_ROOTFS}/var/www/pages/feed/rel-xxxPLATFORM_RELEASExxx"
[ ! -d "${feed}" ] && mkdir -p -m 0755 ${feed}
$(is_system_node_install)
if [ $? -ne 0 ] ; then
    if [ -e "${LAT_DIR}/INSTALL_UUID" ]; then
        INSTALL_UUID=$(< "${LAT_DIR}/INSTALL_UUID")
        ilog "Using saved install uuid ${INSTALL_UUID}"
    else
        INSTALL_UUID=`uuidgen`
        ilog "Generated install uuid ${INSTALL_UUID}"
        echo "${INSTALL_UUID}" > ${LAT_DIR}/INSTALL_UUID
    fi
    ilog "... adding to ${feed}"
    echo ${INSTALL_UUID} > ${feed}/install_uuid
    ilog "... adding to ${PLATFORM_CONF}"
    update_platform_conf "INSTALL_UUID=${INSTALL_UUID}"
else
    pxeurl=$(echo $insturl | sed -e s/ostree_repo//)
    # Check for noverifyssl
    if grep -q noverifyssl /proc/cmdline; then
        NOVERIFYSSL_WGET_OPT="--no-check-certificate"
    else
        NOVERIFYSSL_WGET_OPT=""
    fi
    ilog "Fetching install uuid from ${pxeurl}"
    if [ "${controller}" = true ] ; then
        ilog "... adding to ${feed}"
        pushd ${feed} > /dev/null
    else
        # must be a worker or storage node install
        pushd /tmp > /dev/null

        # There is no feed function on non-controller nodes
        # TODO: Prevent feed dir packaging on non-controller nodes
        rm -rf ${IMAGE_ROOTFS}/var/www/pages/feed
    fi
    if [ ! -e ./install_uuid ] ; then
        wget ${NOVERIFYSSL_WGET_OPT} ${pxeurl}/install_uuid -o /${LAT_DIR}/wget_install_uuid.log
        [ $? -ne 0 ] && report_failure_with_msg "Failed to fetch install_uuid from pxeboot server"
    fi
    if [ -e ./install_uuid ] ; then
        INSTALL_UUID=$(cat install_uuid)
    else
        report_failure_with_msg "Failed to find fetched install_uuid file"
    fi
    popd > /dev/null
    ilog "... adding to ${PLATFORM_CONF}"
    update_platform_conf "INSTALL_UUID=${INSTALL_UUID}"
fi

true
%end


##########################################################################
%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh
ilog "****************************************************"
ilog "***    Post - Upgrade Support                    ***"
ilog "****************************************************"

# INSTALL_UUID was written into platform.conf in the  Post - Kickstart Finalize Install UUID section

if [[ "${insturl}" == *"pxecontroller"* && "${insturl}" == *"http"* ]] ; then
    http_port=$(echo $(cat /proc/cmdline |xargs -n1 echo |grep '^insturl=' | sed -r 's#^[^/]*://[^/]*:([0-9]*)/.*#\1#'))
else
    http_port=8080
fi

cd ${IMAGE_ROOTFS}/var/www/pages

# Sync software repository
feed_url=http://pxecontroller:${http_port}/feed/
sw_release="xxxPLATFORM_RELEASExxx"
hostname="hostname"

if [ "$(curl -sf http://pxecontroller:6385/v1/upgrade/${hostname}/upgrade_in_progress 2>/dev/null)" = "true" ]; then
    ilog "System upgrade in progress"

    ilog "Mirroring software repository (may take several minutes)..."

    wget --recursive --no-parent --no-host-directories --no-clobber --reject 'index.html*' --reject '*.log' \
    -o /${LAT_DIR}/wget_sw_repo.log --exclude-directories=/feed/rel-${sw_release} ${feed_url} \
    || report_failure_with_msg "Mirroring software repository failed"

    # Sync patching repository
    updates_url=http://pxecontroller:${http_port}/updates/
    wget --mirror --no-parent --no-host-directories --reject 'index.html*' --reject '*.log' \
    -o /${LAT_DIR}/wget_sw_patch_repo.log --exclude-directories=/updates/rel-${sw_release}  ${updates_url} \
    || report_failure_with_msg "Mirroring software updates failed"

    # The /v1/upgrade/${hostname}/upgrade_in_progress endpoint accepts any textual data
    # as hostname and returns system-wide upgrade state
    # This is a placeholder as on Debian the hostname is unknown during kickstart.
    # In contrast, the hostname is available on CentOS


    # Check whether a second release is installed
    CURRENT_REL_DIR=rel-${sw_release}
    OTHER_REL_DIR=
    for REL_DIR in ${IMAGE_ROOTFS}/var/www/pages/feed/*; do
        if [[ ! ${REL_DIR} =~ "${sw_release}" ]]; then
            OTHER_REL_DIR=`basename ${REL_DIR}`
            OTHER_REL_VERSION=${OTHER_REL_DIR:4}
            break
        fi
    done

    # If second release is installed, find the latest version of the installer
    if [ ! -z "${OTHER_REL_DIR}" ]; then
        PATCH_RPM=`find ${IMAGE_ROOTFS}/var/www/pages/updates/${OTHER_REL_DIR}/Packages -name 'pxe-network-installer*' | sort -V | tail -1`
        BASE_RPM=`find ${IMAGE_ROOTFS}/var/www/pages/feed/${OTHER_REL_DIR}/Packages -name 'pxe-network-installer*' | sort -V | tail -1`
    fi

    if [ ! -z "${PATCH_RPM}" ]; then
        INSTALL_RPM=${PATCH_RPM}
    elif [ ! -z "${BASE_RPM}" ]; then
        INSTALL_RPM=${BASE_RPM}
    else
        report_failure_with_msg "Unable to find pxe-network-installer RPM for ${OTHER_REL_DIR}. Aborting installation."
    fi

    ilog "Installing pxeboot files for release ${OTHER_REL_DIR} from ${INSTALL_RPM}"

    TMP_RPM=${IMAGE_ROOTFS}/tmp/pxe-network-installer
    mkdir ${TMP_RPM}
    pushd ${TMP_RPM}

    ${IMAGE_ROOTFS}/usr/bin/rpm2cpio ${INSTALL_RPM} | cpio -idm \
    || report_failure_with_msg "Failed to extract pxe-network-installer"

    PXEBOOT_DIR="/var/pxeboot/"
    if [[ "${OTHER_REL_VERSION}" == "21.12" ]]; then
        PXEBOOT_DIR="/pxeboot/"
    fi

    cp -r ${TMP_RPM}/usr ${IMAGE_ROOTFS}/ \
        || report_failure_with_msg "Failed to copy pxe-network-installer /usr"
    cp -r ${TMP_RPM}${PXEBOOT_DIR}$OTHER_REL_DIR ${IMAGE_ROOTFS}/var/pxeboot/ \
        || report_failure_with_msg "Failed to copy pxe-network-installer /var/pxeboot/$OTHER_REL_DIR"
    cp ${TMP_RPM}${PXEBOOT_DIR}pxelinux.cfg.files/*-${OTHER_REL_VERSION} ${IMAGE_ROOTFS}/var/pxeboot/pxelinux.cfg.files/ \
        || report_failure_with_msg "Failed to copy pxe-network-installer pxelinux.cfg files"

    rm -rf ${TMP_RPM}

fi

true
%end

##########################################################################

%post --interpreter=/bin/bash
HOOK_LABEL="post"
. /tmp/lat/ks_functions.sh
ilog "****************************************"
ilog "***    Post - Log Filesystem Setup   ***"
ilog "****************************************"

display_volume_info "final"

true
%end

##########################################################################

%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh
ilog "***********************************************************"
ilog "***    Post Nochroot - Restage OSTree repo              ***"
ilog "***                  - Save Install Scripts and Logs    ***"
ilog "***********************************************************"
ilog "IMAGE_ROOTFS=${IMAGE_ROOTFS}"

get_variable "ostree_repo_fetched"
OSTREE_REPO_FETCHED=$?

# Fetch ostree
sw_release="xxxPLATFORM_RELEASExxx"  # updated by the build
if [ "${controller}" = true ] ; then

    # -1 is all commits, positive number is that number of last commits
    commits="--depth=-1"
    pull_options="${commits} --mirror"
    pxeboot="${IMAGE_ROOTFS}/var/pxeboot"
    feed="${IMAGE_ROOTFS}/var/www/pages/feed/rel-${sw_release}"
    repo="${feed}/ostree_repo"
    mkdir -p "${repo}"
    mkdir -p "${feed}"

    if [ ${OSTREE_REPO_FETCHED} -eq 0 ] ; then
        if is_usb_install -eq 0 ; then

            ilog "Stage ostree_repo from USB device to ${repo}"
            ostree --repo=${repo} init --mode=archive
            ostree --repo=${repo} remote add ${instbr} file:///instboot/ostree_repo
            ostree --repo=${repo} pull ${pull_options} ${instbr}:${instbr}

            # Check if this is a prestage iso.If yes, then
            # copy the ostree_repo to the backup directory.
            if is_prestage -eq 0 ; then
                ilog "Prestage operation: copying repo to /opt/platform-backup"
                staging_dir=platform-backup
                backup_device=/dev/disk/by-partlabel/platform_backup
                backup_mount=/tmp/${staging_dir}

                ilog "Temporary backup mount is ${backup_mount}"
                mkdir -p "${backup_mount}"
                mount "${backup_device}" "${backup_mount}"
                rc=$?
                if [ ${rc} -ne 0 ]; then
                    report_failure_with_msg "Unable to mount ${backup_device} on ${backup_mount} [rc=${rc}]"
                fi

                ilog "Copying repo to ${backup_mount}"
                cp -a ${repo} ${backup_mount}
                rc=$?
                if [ ${rc} -ne 0 ]; then
                    report_failure_with_msg "Unable to copy repo to /opt/platform-backup [rc=${rc}]"
                fi

                # The summary file is not transferred on an ostree pull, so we need to
                # regenerate the checksum here based on the new local repo contents
                ilog "Calculating new checksum for prestaged ${backup_mount}/ostree_repo"
                pushd "${backup_mount}" > /dev/null
                find ostree_repo -type f -exec md5sum {} + | LC_ALL=C sort | md5sum | awk '{ print $1; }' > .ostree_repo_checksum
                ilog "Calculated checksum: $(cat .ostree_repo_checksum)"
                popd > /dev/null

                if [ -e "/instboot/opt/platform-backup/${sw_release}" ]; then
                    ilog "Copying images and patches to ${backup_mount}"
                    cp -a  /instboot/opt/platform-backup/${sw_release} ${backup_mount}
                    rc=$?
                    if [ ${rc} -ne 0 ]; then
                        report_failure_with_msg "Unable to copy images from /instboot to /opt/platform-backup [rc=${rc}]"
                    fi
                fi

                umount "${backup_mount}"
            fi
        else
            ilog "Stage ostree_repo from previous /sysroot pull to ${repo}"
            mv -f /sysroot/var/www/pages/feed/rel-${sw_release}/ostree_repo ${IMAGE_ROOTFS}/var/www/pages/feed/rel-${sw_release}/
        fi

        # This is used by patching.
        # Set ostree remote to the local install feed
        file_feed="file:///var/www/pages/feed/rel-${sw_release}/ostree_repo/"
        feed_branch="starlingx"
        ilog "Replacing ostree sysroot remote with: ${file_feed} ${feed_branch}"
        ostree --repo=/sysroot/ostree/repo remote delete ${instname}
        ostree --repo=/sysroot/ostree/repo remote add ${instname} ${file_feed} ${feed_branch}
        # Set feed ostree remote "starlingx" to point to active controller's feed ostree repo
        feed_remote_name="starlingx"
        feed_remote_url="http://controller:8080/feed/rel-${sw_release}/ostree_repo/"
        ilog "Replacing ostree feed remote with: ${feed_remote_url} ${feed_remote_name}"
        ostree --repo=${repo} remote delete ${feed_remote_name}
        ostree --repo=${repo} remote add ${feed_remote_name} ${feed_remote_url} ${feed_branch}

        # This fetch is only needed once because the repo is stored in /var
        set_variable "ostree_repo_fetched"


        ####################################################################
        # Fetch and add efi.img to /var/pxeboot
        #####################################################################

        mkdir -p "${pxeboot}/EFI/BOOT"

        # Check for noverifyssl
        if grep -q noverifyssl /proc/cmdline; then
            NOVERIFYSSL_WGET_OPT="--no-check-certificate"
        else
            NOVERIFYSSL_WGET_OPT=""
        fi

        # handle USB install
        if is_usb_install -eq 0 ; then
            cp -a /instboot/efi.img ${pxeboot}

        # handle pxeboot install
        else
            pxeurl=$(echo $insturl | sed -e s/ostree_repo//)

            # Fetch and stage the efi.img
            ilog "Fetch efi.img from ${pxeurl} to ${pxeboot}"
            pushd ${pxeboot} > /dev/null
            for f in efi.img ; do
                ilog "... fetching ${f} to ${pxeboot}"

                wget ${NOVERIFYSSL_WGET_OPT} ${pxeurl}/${f} -o /${LAT_DIR}/wget.tmp
                [ $? -ne 0 ] && report_failure_with_msg "Failed to get ${pxeurl}/${f}"
                cat /${LAT_DIR}/wget.tmp >> /${LAT_DIR}/wget_pxeboot_setup.log

                # also copy to the feeds
                ilog "... copying  ${f} to ${feed}"
                cp -a ${f} ${feed}
            done
            popd > /dev/null

            [ -e /${LAT_DIR}/wget.tmp ] && rm -f /${LAT_DIR}/wget.tmp
        fi

        # Save and override the LAT grub menu by creating a link to the default
        # provisioning mac based grub menu.
        pushd ${pxeboot}/EFI/BOOT > /dev/null
        if [ ! -L grub.cfg ] ; then
            if [ -e grub.cfg ] ; then
                mv grub.cfg grub.cfg.lat
            fi
            ln -s ../../pxelinux.cfg/grub.cfg
        fi
        popd > /dev/null
    fi
else
    # This is used by patching.
    # For non-controller system node installs (worker/storage) we need to
    # update the ostree remote to be the url to the pxecontroller's ostree_repo
    # and set the remote debian branches to starlingx.
    feed_branch="starlingx"
    feed_remote_url="http://controller:8080/feed/rel-${sw_release}/ostree_repo/"
    ilog "Replacing ostree sysroot remote with: ${feed_branch}"
    ostree --repo=/sysroot/ostree/repo remote delete ${instname}
    ostree --repo=/sysroot/ostree/repo remote add ${instname} ${feed_remote_url} ${feed_branch}
fi

# Verify Patched iso
if [ -d "/instboot/patches" ]; then
    ilog "Prepatched iso"
    ilog "Creating patching metadata directories"
    mkdir -p ${IMAGE_ROOTFS}/var/rootdirs/opt/patching/metadata/{committed,available,applied}
    cp -a /instboot/patches/* ${IMAGE_ROOTFS}/var/rootdirs/opt/patching/metadata/committed/
fi

# Save the install scripts and kickstart logs
mount /dev/mapper/cgts--vg-log--lv "${IMAGE_ROOTFS}/${LOG_DIR}"
if [ ${?} -ne 0 ] ; then
    elog "Failed to mount /dev/mapper/cgts--vg-log--lv"
else
    if [ -e "${IMAGE_ROOTFS}/${LOG_DIR}" ]; then
        cp -a /${LAT_DIR} ${IMAGE_ROOTFS}/${LOG_DIR}
        cp /install ${IMAGE_ROOTFS}/${LOG_DIR}/lat
        cp /lat-installer* ${IMAGE_ROOTFS}/${LOG_DIR}/lat
        ilog "Saved installer data to ${IMAGE_ROOTFS}/${LOG_DIR}"
    else
        wlog "Could not save installer data"
    fi
    umount "${IMAGE_ROOTFS}/${LOG_DIR}"
fi

true
%end

##########################################################################

%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh

# This section needs to be removed when solutions are implemented

ilog "******************************************************************"
ilog "***    Post Nochroot - Workarounds for enabling integration    ***"
ilog "******************************************************************"

# Workaround for enabling swacts on AIO-DX
# Workaround for enabling compute unlocks
# Launchpad: #1983580
[ -f ${IMAGE_ROOTFS}/var/lib/dpkg/triggers/Unincorp ] && rm ${IMAGE_ROOTFS}/var/lib/dpkg/triggers/Unincorp

true
%end

##########################################################################

%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh

# This needs to update all available ostree based rootfs

ilog "******************************************************"
ilog "***    Post Nochroot - Set up filesystem access    ***"
ilog "******************************************************"

if [ "${controller}" = true ] ; then
    mkdir -p ${IMAGE_ROOTFS}/var/rootdirs/opt/platform-backup
    echo -e "LABEL=platform_backup\t/var/rootdirs/opt/platform-backup\text4\tdefaults\t1 2" >> ${IMAGE_ROOTFS}/etc/fstab
elif [ "${worker}" = true ] ; then
    mkdir -p ${IMAGE_ROOTFS}/var/rootdirs/opt/platform
    echo -e "controller-platform-nfs:/opt/platform\t/opt/platform\tnfs\ttimeo=30,udp,rsize=1024,wsize=1024,_netdev 0 0" >> ${IMAGE_ROOTFS}/etc/fstab
fi

mkdir -p ${IMAGE_ROOTFS}/var/rootdirs/scratch
echo -e "/dev/mapper/cgts--vg-scratch--lv\t/var/rootdirs/scratch\text4\tdefaults\t1 2" >> ${IMAGE_ROOTFS}/etc/fstab

mkdir -p ${IMAGE_ROOTFS}/var/log
echo -e "/dev/mapper/cgts--vg-log--lv\t/var/log\text4\tdefaults\t1 2" >> ${IMAGE_ROOTFS}/etc/fstab

# Report and update the lvm config for the sysroot. Remove preceeding tab and
# convert to spaces to align with puppet expectations
LV_ROOTDISK_BY_PATH=$(get_by_path ${LV_ROOTDISK})
log_lvm_conf "SysRoot Initial" ${IMAGE_ROOTFS}/etc/lvm/lvm.conf
ilog ""
ilog "Update the LVM global filter to enable the initial physical volume only: ${LV_ROOTDISK_BY_PATH}"
ilog ""
sed -i "s@^\(\s*\)# global_filter = \[.*@        global_filter = [ \"a|${LV_ROOTDISK_BY_PATH}|\", \"r|.*|\" ]@" ${IMAGE_ROOTFS}/etc/lvm/lvm.conf
log_lvm_conf "SysRoot Updated" ${IMAGE_ROOTFS}/etc/lvm/lvm.conf

# Create first_boot flag
touch ${IMAGE_ROOTFS}/etc/platform/.first_boot

true
%end

##########################################################################

%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh

# This needs to update all available ostree based rootfs

ilog "****************************************************************"
ilog "***    Post Nochroot - Set up package links per node type    ***"
ilog "****************************************************************"
ilog "IMAGE_ROOTFS=${IMAGE_ROOTFS}"

if [ ! "${controller}" = true -a "${worker}" = true ] ; then
    ilog "Setting up ${TRAIT__WORKER} package file links"
    ln -s /etc/goenabled.d/config_goenabled_check.sh.worker ${IMAGE_ROOTFS}/etc/goenabled.d/config_goenabled_check.sh
    ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/controllerconfig.service
    ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/storageconfig.service
elif [ "${storage}" = true ] ; then
    ilog "Setting up ${TRAIT__STORAGE} package file links"
    ln -s /etc/goenabled.d/config_goenabled_check.sh.storage ${IMAGE_ROOTFS}/etc/goenabled.d/config_goenabled_check.sh
    ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/controllerconfig.service
    ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/workerconfig.service
elif [ "${controller}" = true ] ; then
    ilog "Setting up ${TRAIT__CONTROLLER} package file links"
    ln -s /etc/goenabled.d/config_goenabled_check.sh.controller ${IMAGE_ROOTFS}/etc/goenabled.d/config_goenabled_check.sh
    ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/workerconfig.service
    ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/storageconfig.service
fi

chmod 700 ${IMAGE_ROOTFS}/etc/goenabled.d/config_goenabled_check.sh

if [[ ! -d "${IMAGE_ROOTFS}/etc/pmon.d" ]]; then
    wlog "Directory ${IMAGE_ROOTFS}/etc/pmon.d/ is missing, creating it now"
    mkdir ${IMAGE_ROOTFS}/etc/pmon.d
fi

if [ "${controller}" = true ] ; then
    ilog "Setting up pmon files for ${TRAIT__CONTROLLER} and/or ${TRAIT__CONTROLLER} side of ${SYSTEM_TYPE__AIO}"
    ln -s /usr/share/starlingx/pmon.d/acpid.conf ${IMAGE_ROOTFS}/etc/pmon.d/acpid.conf
    ln -s /usr/share/starlingx/pmon.d/containerd.conf ${IMAGE_ROOTFS}/etc/pmon.d/containerd.conf
    ln -s /usr/share/starlingx/pmon.d/docker.conf ${IMAGE_ROOTFS}/etc/pmon.d/docker.conf
    ln -s /usr/share/starlingx/pmon.d/fm-api.conf ${IMAGE_ROOTFS}/etc/pmon.d/fm-api.conf
    ln -s /usr/share/starlingx/pmon.d/fsmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/fsmon.conf
    ln -s /usr/share/starlingx/pmon.d/hbsAgent.conf ${IMAGE_ROOTFS}/etc/pmon.d/hbsAgent.conf
    ln -s /usr/share/starlingx/pmon.d/hbsClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/hbsClient.conf
    ln -s /usr/share/starlingx/pmon.d/lmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/lmon.conf
    ln -s /usr/share/starlingx/pmon.d/logmgmt ${IMAGE_ROOTFS}/etc/pmon.d/logmgmt
    ln -s /usr/share/starlingx/pmon.d/mtcClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcClient.conf
    ln -s /usr/share/starlingx/pmon.d/mtcalarm.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcalarm.conf
    ln -s /usr/share/starlingx/pmon.d/mtclogd.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtclogd.conf
    ln -s /usr/share/starlingx/pmon.d/sm-api.conf ${IMAGE_ROOTFS}/etc/pmon.d/sm-api.conf
    ln -s /usr/share/starlingx/pmon.d/sm-eru.conf ${IMAGE_ROOTFS}/etc/pmon.d/sm-eru.conf
    ln -s /usr/share/starlingx/pmon.d/sm.conf ${IMAGE_ROOTFS}/etc/pmon.d/sm.conf
    ln -s /usr/share/starlingx/pmon.d/sshd.conf ${IMAGE_ROOTFS}/etc/pmon.d/sshd.conf
    ln -s /usr/share/starlingx/pmon.d/sssd.conf ${IMAGE_ROOTFS}/etc/pmon.d/sssd.conf
    ln -s /usr/share/starlingx/pmon.d/sw-patch-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sw-patch-agent.conf
    ln -s /usr/share/starlingx/pmon.d/sw-patch-controller-daemon.conf ${IMAGE_ROOTFS}/etc/pmon.d/sw-patch-controller-daemon.conf
    ln -s /usr/share/starlingx/pmon.d/sysinv-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sysinv-agent.conf
    ln -s /usr/share/starlingx/pmon.d/syslog-ng.conf ${IMAGE_ROOTFS}/etc/pmon.d/syslog-ng.conf
fi
if [ "${worker}" = true ] ; then
    ilog "Setting up pmon files for ${TRAIT__WORKER} and/or ${TRAIT__WORKER} side of ${SYSTEM_TYPE__AIO}"
    ln -s /usr/share/starlingx/pmon.d/acpid.conf ${IMAGE_ROOTFS}/etc/pmon.d/acpid.conf
    ln -s /usr/share/starlingx/pmon.d/containerd.conf ${IMAGE_ROOTFS}/etc/pmon.d/containerd.conf
    ln -s /usr/share/starlingx/pmon.d/docker.conf ${IMAGE_ROOTFS}/etc/pmon.d/docker.conf
    ln -s /usr/share/starlingx/pmon.d/fsmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/fsmon.conf
    ln -s /usr/share/starlingx/pmon.d/guestServer.conf ${IMAGE_ROOTFS}/etc/pmon.d/guestServer.conf
    ln -s /usr/share/starlingx/pmon.d/hbsClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/hbsClient.conf
    ln -s /usr/share/starlingx/pmon.d/isolcpu_plugin.conf ${IMAGE_ROOTFS}/etc/pmon.d/isolcpu_plugin.conf
    ln -s /usr/share/starlingx/pmon.d/lmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/lmon.conf
    ln -s /usr/share/starlingx/pmon.d/logmgmt ${IMAGE_ROOTFS}/etc/pmon.d/logmgmt
    ln -s /usr/share/starlingx/pmon.d/mtcClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcClient.conf
    ln -s /usr/share/starlingx/pmon.d/mtcalarm.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcalarm.conf
    ln -s /usr/share/starlingx/pmon.d/mtclogd.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtclogd.conf
    ln -s /usr/share/starlingx/pmon.d/sm-eru.conf ${IMAGE_ROOTFS}/etc/pmon.d/sm-eru.conf
    ln -s /usr/share/starlingx/pmon.d/sshd.conf ${IMAGE_ROOTFS}/etc/pmon.d/sshd.conf
    ln -s /usr/share/starlingx/pmon.d/sssd.conf ${IMAGE_ROOTFS}/etc/pmon.d/sssd.conf
    ln -s /usr/share/starlingx/pmon.d/sw-patch-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sw-patch-agent.conf
    ln -s /usr/share/starlingx/pmon.d/sysinv-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sysinv-agent.conf
    ln -s /usr/share/starlingx/pmon.d/syslog-ng.conf ${IMAGE_ROOTFS}/etc/pmon.d/syslog-ng.conf
fi
if [ "${storage}" = true ] ; then
    ilog "Setting up pmon files for ${TRAIT__STORAGE} and/or ${TRAIT__STORAGE} side of ${SYSTEM_TYPE__AIO}"
    ln -s /usr/share/starlingx/pmon.d/acpid.conf ${IMAGE_ROOTFS}/etc/pmon.d/acpid.conf
    ln -s /usr/share/starlingx/pmon.d/containerd.conf ${IMAGE_ROOTFS}/etc/pmon.d/containerd.conf
    ln -s /usr/share/starlingx/pmon.d/docker.conf ${IMAGE_ROOTFS}/etc/pmon.d/docker.conf
    ln -s /usr/share/starlingx/pmon.d/fsmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/fsmon.conf
    ln -s /usr/share/starlingx/pmon.d/hbsClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/hbsClient.conf
    ln -s /usr/share/starlingx/pmon.d/lmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/lmon.conf
    ln -s /usr/share/starlingx/pmon.d/logmgmt ${IMAGE_ROOTFS}/etc/pmon.d/logmgmt
    ln -s /usr/share/starlingx/pmon.d/mtcClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcClient.conf
    ln -s /usr/share/starlingx/pmon.d/mtcalarm.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcalarm.conf
    ln -s /usr/share/starlingx/pmon.d/mtclogd.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtclogd.conf
    ln -s /usr/share/starlingx/pmon.d/sm-eru.conf ${IMAGE_ROOTFS}/etc/pmon.d/sm-eru.conf
    ln -s /usr/share/starlingx/pmon.d/sshd.conf ${IMAGE_ROOTFS}/etc/pmon.d/sshd.conf
    ln -s /usr/share/starlingx/pmon.d/sw-patch-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sw-patch-agent.conf
    ln -s /usr/share/starlingx/pmon.d/sysinv-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sysinv-agent.conf
    ln -s /usr/share/starlingx/pmon.d/syslog-ng.conf ${IMAGE_ROOTFS}/etc/pmon.d/syslog-ng.conf
fi

if [ -e "/instboot/ks-addon.cfg" ]; then
    ilog "Running kickstart addon script"
    source /instboot/ks-addon.cfg
    rc=$?
    if [ "${rc}" -ne 0 ]; then
        ilog "Addon script ks-addon.cfg  exited with [rc=${rc}]"
    fi
fi

true
%end