starlingx/metal
Code Issues Proposed changes
414f61b9df
metal/kickstart/files/miniboot.cfg
Kyle MacLeod 8be0edb971 Support nexthop_gateway in IPv6 
Re-add support for nexthop_gateway in IPv6 configurations in Debian.

Ensure the translated nexthop_gateway boot parameter is applied to IPv6
network configurations.

These changes are applied to both the pre-ostree-pull network
configuration (via 'ip' command), and the /etc/network/interfaces.d
ifupdown interface configuration.

Test Plan
PASS:
- Test IPv6 install using only nexthop_gateway value
    - With and without bootstrap_vlan
    - Ensure that the default route is created, via the given
      nexthop_gateway
    - Validate successful ostree repo pull
    - Ensure that the default route is created via the
    - /etc/network/interfaces.d upon reboot into the ostree repo
    - Validate that communications are established to subcloud, ready
      for ansible bootstrap
- Test IPv6 install using no nexthop_gateway value
    - With and without bootstrap_vlan
    - Verify that default route is created, with no gateway
- Test IPv4 install using only nexthop_gateway value
    - With and without bootstrap_vlan
    - Ensure that the default route is created, via the given
      nexthop_gateway
    - Full install plus bootstrap, as above
    - Tested in libvirt
- Test IPv4 install using no nexthop_gateway value
    - With and without bootstrap_vlan
    - Verify that default route is created, with no gateway
    - Full install plus bootstrap, as above
    - Tested in libvirt

Closes-Bug: 2017007

Signed-off-by: Kyle MacLeod <kyle.macleod@windriver.com>
Change-Id: Iee71f753983fa77ad396a6a90e2f6cec189cbaa8
Signed-off-by: Kyle MacLeod <kyle.macleod@windriver.com>
2023-04-20 13:27:34 -04:00

3081 lines
119 KiB
Bash
Raw Blame History

#
# Copyright (c) 2022-2023 Wind River Systems, Inc.
# SPDX-License-Identifier: Apache-2.0
#
############################################################################
#
# StarlingX Debian Unified Miniboot/USB Install Kickstart
#
############################################################################
#
# This is the unified kickstart for Debian installation of subcloud nodes
# from the USB or over Redfish.
#
# IMPORTANT:
# This file is derived from kickstart.cfg. Since we must pull bug fixes
# from kickstart.cfg, developers should be mindful to minimize the diff
# between the two files.
#
# The Linux Assembly Tool (LAT) performs a unified install for all subcloud
# nodes and exposes boot loader environment variables to this kickstart.
#
# This kickstart must be called with the 'traits=' boot parameter.
# Valid traits are:
#
# controller ... the controller function
# storage ... the storage function
# worker ... the worker function
# lowlatency ... the low latency function
#
# Valid node personality trait groupings ... set configuration function
#
# traits=controller ... Controller
# traits=controller,worker ... All-in-one
# traits=controller,worker,lowlatency ... All-in-one Low Latency
# traits=storage ... Storage
# traits=worker ... Worker
# traits=worker,lowlatency ... Worker Low Latency
#
# Kickstart Stages
#
# Kickstart Early - Common Functions Script
# Pre Partition - Pre Disk Setup Common Script
# Partition - Partition Disks
# Mkfs - Format Partitions & LVM Volumes
# Post - Traits & Platform Config File update
# Post - Persistent Interface Setup
# Post - Set Kernel Args
# Post - Interface Setup
# Post Nochroot - Kickstart Finalize Install UUID
# Post Nochroot - Restage OSTree repo
# - Save Install Scripts and Logs
# Post - Log Filesystem Setup
# Post Nochroot - Workarounds for enabling integration
# Post Nochroot - Set up filesystems access
# Post Nochroot - Set up package links per node type
#
###########################################################################
#
# The first kickstart script creates '/tmp/lat/functions' common functions
# file that can be loaded from any of the other hook sections.
#
###########################################################################
# Kickstart Early - Common Functions Script
%ks-early --interpreter=/bin/bash
# Define a hook to report error log if install failed
cat << EOF > /tmp/lat/report_error_log.sh
#!/bin/bash
_dev=\$(blkid --label fluxdata -o device)
if [ "\$_dev" != "" ] ; then
mkdir -p /t
mount -o rw,noatime \$_dev /t
echo "Save install-fail.log to partition fluxdata /var (\$_dev)"
sleep 2
cp /install.log /t/install-fail.log
umount /t
fi
EOF
chmod 755 /tmp/lat/report_error_log.sh
cat << EOF >> /tmp/lat/ks_functions.sh
[ "\${HOOK_LABEL}" = "" ] && HOOK_LABEL="unknown"
export LOG_DIR="var/log"
export LAT_DIR="tmp/lat"
export LOGFILE="/\${LAT_DIR}/miniboot.log"
############################################################################
# log utils
############################################################################
function log()
{
local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")"
echo "\$dt miniboot \${HOOK_LABEL} info: \${prefix} \$1" >>\${LOGFILE}
}
function ilog()
{
[ -z "\${stdout}" ] && stdout=1
local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")"
echo "\$dt miniboot \${HOOK_LABEL} info: \${prefix} \$1" >&\${stdout}
echo "\$dt miniboot \${HOOK_LABEL} info: \${prefix} \$1" >>\${LOGFILE}
}
function dlog()
{
if [ \${debug} -ne 0 ] ; then
[ -z "\$stdout" ] && stdout=1
local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")"
echo "\$dt miniboot \${HOOK_LABEL} debug: \${prefix} \$1" >&\${stdout}
echo "\$dt miniboot \${HOOK_LABEL} debug: \${prefix} \$1" >>\${LOGFILE}
fi
}
function wlog()
{
[ -z "\$stdout" ] && stdout=1
local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")"
echo "\$dt miniboot \${HOOK_LABEL} warn: \${prefix} \$1" >&\${stdout}
echo "\$dt miniboot \${HOOK_LABEL} warn: \${prefix} \$1" >>\${LOGFILE}
}
function elog()
{
[ -z "\$stdout" ] && stdout=1
local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")"
echo "\$dt miniboot \${HOOK_LABEL} error: \${prefix} \$1" >&\${stdout}
echo "\$dt miniboot \${HOOK_LABEL} error: \${prefix} \$1" >>\${LOGFILE}
}
########################################################################
# Name : report_failure_with_msg
# Purpose : Report installation error, offer a console and
# reboot on exit.
# Parameters: \$1 is the failure message string
# Return : Does not return
########################################################################
function report_failure_with_msg()
{
local msg=\${1}
echo -e '\n\nInstallation failed.\n'
wlog "Installation Failed: ERROR: \${msg}"
echo "... dropping to shell ; exit to reboot ..."
sleep 1
bash
reboot -f
}
########################################################################
# Name : get_disk
# Parameters: \$1 - any disk path
# Returns : echo of the canonicalized version of the disk path
#
# Example : /dev/sda -> /dev/sda
# : /dev/nvme1n1 -> /dev/nvme1n1
# : /dev/disk/by-path/pci-0000:02:00.0-scsi-0:1:0:0 -> /dev/sda
# : /dev/disk/by-id/wwn-0x50014ee6ae58b07f -> /dev/sdc
# : /dev/disk/by-id/wwn-0x600508b1001c2a30 -> /dev/dm-0
#########################################################################
function get_disk()
{
echo "\$(cd /dev ; readlink -f \$1)"
}
#########################################################################
# Name : get_persistent_disk
# Parameters: \$1 - device name i.e. /dev/sda
# Returns : echo of device name by-path or by-id
# example: /dev/disk/by-path/pci-0000:03:00.0-scsi-0:2:0:0 or
# /dev/disk/by-id/wwn-0x50014ee6ae58b07f
#
# Notes: During kickstarts there are 2 links to a generic /dev/sd<X>.
# Example: pci-0000:00:1f.2-ata-1 and pci-0000:00:1f.2-ata-1.0.
# After reboot only the longer 'ata-1.0' exists.
# Reverse the parsing so we return the longer path.
#########################################################################
function get_persistent_disk()
{
local dev=\$(cd /dev ; readlink -f \$1)
case \$dev in
*"dm-"*)
for p in /dev/disk/by-id/wwn-*; do
if [ "\$(basename \$dev)" = "\$(basename \$(readlink -f \$p))" ]; then
echo "\$p"
return
fi
done
;;
*)
reverse_list=""
for p in /dev/disk/by-path/*; do
reverse_list="\${p} \${reverse_list}"
done
for p in \${reverse_list}; do
if [ "\$(basename \$dev)" = "\$(basename \$(readlink -f \$p))" ]; then
echo "\$p"
return
fi
done
;;
esac
}
#########################################################################
# Name : get_part_prefix
# Parameters: \$1 - device name i.e. /dev/sda, /dev/nvme0n1, /dev/dm-0
# Returns : echo of acceptable partition prefix
# example: /dev/sda
# /dev/nvme0n1p
# /dev/disk/by-id/wwn-0x50014ee6ae58b07f-part
#########################################################################
function get_part_prefix()
{
# ensure that we have a canonicalized device
local dev=\$(cd /dev ; readlink -f \$1)
case \$dev in
*"nvme"*)
echo "\${dev}p"
;;
*"dm-"*)
for p in /dev/disk/by-id/wwn-*; do
if [ "\$dev" = "\$(readlink -f \$p)" ]; then
echo "\${p}-part"
return
fi
done
;;
*)
echo "\${dev}"
;;
esac
}
#########################################################################
# Name : exec_retry
# Purpose : Retry operations up to a caller specified ...
# Parameters: $1 - retries - up to number of retries before giving up
# $2 - time in seconds between each retry
# $3 - the command string to execute
# Returns : exit code from last command operation
#########################################################################
function exec_retry()
{
local retries=\${1}
local interval=\${2}
local command=\${3}
# local variables
retry_count=1
local ret_code=0
local ret_stdout=""
command="\${command}" # 2>&\${stdout}"
while [ \${retry_count} -le \${retries} ]; do
# dlog "Running command: '\${command}'."
ret_stdout=\$(eval \${command})
ret_code=\${?}
[ \${ret_code} -eq 0 ] && break
wlog "Error running command '\${command}'. Try \${retry_count} of \${retries} retry in \${interval}s."
wlog "ret_code: \${ret_code}, stdout: '\${ret_stdout}'."
sleep \${interval}
retry_count=\$((retry_count+1))
done
echo "\${ret_stdout}"
return \${ret_code}
}
#########################################################################
# Name : exec_no_fds
# Purpose : Execute command (with retries) after closing fds
# Parameters: $1 - List of volume file descriptors
# $2 - the command string to execute
# $3 - up to number of retries before giving up
# $4 - time in seconds between each retry
# Returns : exit code from last command operation
#########################################################################
function exec_no_fds()
{
# Close open FDs when executing commands that complain about leaked FDs.
local fds=\${1}
local cmd=\${2}
local retries=\${3}
local interval=\${4}
local ret_code=0
local ret_stdout=""
for fd in \${fds}
do
local cmd="\${cmd} \$fd>&-"
done
if [ -z "\${retries}" ]; then
#wlog "Running command: '\${cmd}'."
eval "\${cmd}"
else
ret_stdout=\$(exec_retry "\${retries}" "\${interval}" "\${cmd}")
ret_code=\${?}
echo "\${ret_stdout}"
return \${ret_code}
fi
}
#########################################################################
# Name : is_miniboot
# Returns : true : 0 if this is remote subcloud install (redfish)
# false: 1
#########################################################################
function is_miniboot()
{
if [ "\$(grep -c 'ip=' /proc/cmdline)" -ne 0 ]; then
return 0
else
return 1
fi
}
#########################################################################
# Name : is_system_node_install
# Returns : true : 0 if 'pxecontroller' is in $insturl boot arg
# false: 1
#########################################################################
function is_system_node_install()
{
# minboot: always false
return 1
}
#########################################################################
# Name : is_usb_install
# Returns : true :0
# false:1
#########################################################################
function is_usb_install()
{
# minboot: always false
return 1
}
#########################################################################
# Name : check_prestage
# Returns : true :0
# false:1
#########################################################################
function check_prestage()
{
# minboot: always false
return 1
}
#########################################################################
# Name : is_prestage
# Returns : true :0
# false:1
#########################################################################
function is_prestage()
{
# minboot: always false
return 1
}
#########################################################################
# Name : update_platform_conf
# Purpose : Update the platform.conf file with logging
#########################################################################
PLATFORM_CONF="/etc/platform/platform.conf"
function update_platform_conf()
{
ilog "update \${IMAGE_ROOTFS}\${PLATFORM_CONF} : \${1}"
echo "\${1}" >> \${IMAGE_ROOTFS}\${PLATFORM_CONF}
}
#########################################################################
# Name : get_iface_from_ethname
# Purpose : Translate eth# interface to the alternate predicitive
# interface name'altname'.
# Parameter: eth# name interface string to translate
# Return : echo's of altname interface string
#########################################################################
# TODO: Move to where its used if there is only one section caller
function get_iface_from_ethname()
{
iface=\${1}
# log the interface info for post issue debug
udevadm info --export --query=property --path=/sys/class/net/\${iface} >> \${LOGFILE}
# convert to predictive name: ONBOARD > SLOT > PATH
# https://wiki.debian.org/NetworkInterfaceNames
altname=\$(udevadm info --export --query=property --path=/sys/class/net/\${iface} | grep ID_NET_NAME_ONBOARD)
altname=\${altname#ID_NET_NAME_ONBOARD=}
if [ -z "\${altname}" ] ; then
# try searching for ID_NET_NAME_SLOT
log "... retrying to translate \${iface} to predictive name with ID_NET_NAME_SLOT filter label "
altname=\$(udevadm info --export --query=property --path=/sys/class/net/\${iface} | grep ID_NET_NAME_SLOT)
altname=\${altname#ID_NET_NAME_SLOT=}
fi
if [ -z "\${altname}" ] ; then
# try searching for ID_NET_NAME_PATH
log "... retrying to translate \${iface} to predictive name with ID_NET_NAME_PATH filter label "
altname=\$(udevadm info --export --query=property --path=/sys/class/net/\${iface} | grep ID_NET_NAME_PATH)
altname=\${altname#ID_NET_NAME_PATH=}
fi
# The altname is seen enveloped with tick's ; 'eno1'
# Handle with and without tick's just in case
if [ -z "\${altname}" ] ; then
log "Failed to translate \${iface} to predictive name"
elif [ "\${altname::1}" = "'" ] ; then
echo "\${altname:1:-1}"
else
echo "\${altname}"
fi
}
function display_volume_info ()
{
if [ \${debug} -ne 0 ] ; then
ilog "Volume Info:\${1}"
pvscan 2>/dev/null
pvscan 2>/dev/null >> \${LOGFILE}
lvscan 2>/dev/null
lvscan 2>/dev/null >> \${LOGFILE}
pvdisplay 2>/dev/null
pvdisplay 2>/dev/null >> \${LOGFILE}
lvdisplay 2>/dev/null
lvdisplay 2>/dev/null >> \${LOGFILE}
fi
}
display_mount_info()
{
if [ \${debug} -ne 0 ] ; then
echo "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
lsblk -o name,mountpoint,label,size,uuid
echo "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
fi
}
function log_lvm_conf ()
{
local msg=\${1}
local conf=\${2}
lvm_global_filter=\$(cat \${conf} | grep "global_filter =")
lvm_preferred_names=\$(cat \${conf} | grep "preferred_names =")
ilog "\${msg}: \${conf}: \${lvm_global_filter}"
ilog "\${msg}: \${conf}: \${lvm_preferred_names}"
}
function breakpoint()
{
echo "*** BREAKPOINT ***: \${1} ; type exit to continue"
bash
echo "continuing from breakpoint: \${1}"
}
function set_variable()
{
touch "/\${LAT_DIR}/\${1}"
}
function get_variable()
{
[ -e "/\${LAT_DIR}/\${1}" ] && return 1
return 0
}
function clr_variable()
{
rm -f "/\${LAT_DIR}/\${1}"
}
#########################################################################
# Name : get_aio_controller_provisioning_sizes
# Purpose : Provide partition, physical volume, and logical volume sizes
# Parameter: None
# Return : Nothing, but exports key values
#########################################################################
function get_aio_controller_provisioning_sizes()
{
gib=\$((1024*1024*1024))
# Partitions
export PART_SZ_EFI=300
export PART_SZ_BOOT=2048
export PART_SZ_ROOT=0
# Logical volumes
export LV_SZ_LOG=8000
export LV_SZ_ROOT=20480
export LV_SZ_SCRATCH=16000
export LV_SZ_VAR=20480
##
## NOTE: updates to partition sizes need to be also reflected in
## - config/.../sysinv/conductor/manager.py:create_controller_filesystems()
## - config/.../sysinv/common/constants.py
##
## NOTE: When adding partitions, we currently have a max of 4 primary partitions.
## If more than 4 partitions are required, we can use a max of 3 --asprimary,
## to allow 1 primary logical partition with extended partitions
##
## NOTE: Max default PV size must align with the default controllerfs sizes
##
##
## NOTE TO REVIEWERS:
## This section was talen from CentOS and needs to be updated for Debian.
##
##***********************************************************************
## Large disk install (for disks over 240GB)
## - DB size is doubled to allow for upgrades
##
## BACKUP_OVERHEAD = 5GiB
## DEFAULT_PLATFORM_STOR_SIZE = 10GiB
## DEFAULT_DATABASE_STOR_SIZE = 10GiB
## BACKUP = DEFAULT_DATABASE_STOR_SIZE +
## DEFAULT_PLATFORM_STOR_SIZE +
## BACKUP_OVERHEAD = 25GiB
## LV_SZ_LOG = 8GiB
## LV_SZ_ROOT = 20 GiB
## LV_SZ_SCRATCH = 16GiB
## LV_SZ_VAR = 20 GiB
## RABBIT_LV = 2GiB
## DEFAULT_EXTENSION_STOR_SIZE = 1GiB
## KUBERNETES_DOCKER_STOR_SIZE = 30GiB
## DOCKER_DISTRIBUTION_STOR_SIZE = 16GiB
## ETCD_STOR_SIZE = 5GiB
## CEPH_MON_SIZE = 20GiB
## KUBELET_STOR_SIZE = 10GiB
## DC_VAULT_SIZE = 15GiB
## RESERVED_PE = 16MiB (based on pesize=32768)
##
## MINIMUM_PLATFORM_PV_SIZE = (10 + 2*10 + 25 + 8 + 20 + 16 + 20 + 2 + 1 + 30 + 16 + 5 + 20 + 10 + 15)GiB + 16MiB/1024 = 218.02GiB
##
##***********************************************************************
## Small disk install - (for disks below 240GB)
## - DB size is doubled to allow for upgrades
##
## DEFAULT_PLATFORM_STOR_SIZE = 10GiB
## DEFAULT_SMALL_DATABASE_STOR_SIZE = 5GiB
## DEFAULT_SMALL_BACKUP_STOR_SIZE = 20GiB
##
## LV_SZ_LOG = 8GiB
## LV_SZ_SCRATCH = 16GiB
## RABBIT_LV = 2GiB
## DEFAULT_EXTENSION_STOR_SIZE = 1GiB
## KUBERNETES_DOCKER_STOR_SIZE = 30GiB
## DOCKER_DISTRIBUTION_STOR_SIZE = 16GiB
## ETCD_STOR_SIZE = 5GiB
## CEPH_MON_SIZE = 20GiB
## KUBELET_STOR_SIZE = 10GiB
## DC_VAULT_SIZE = 15GiB
## RESERVED_PE = 16MiB (based on pesize=32768)
##
## MINIMUM_PLATFORM_PV_SIZE = (10 + 2*5 + 20 + 8 + 16 + 2 + 1 + 30 + 16 + 5 + 20 + 10 + 15)GiB + 16MiB/1024 = 163.02GiB
##
##***********************************************************************
## Tiny disk install - (for disks below 154GB)
##
## NOTE: Tiny disk setup is mainly for StarlingX running in QEMU/KVM VM.
##
## DEFAULT_TINY_PLATFORM_STOR_SIZE = 1GiB
## DEFAULT_TINY_DATABASE_STOR_SIZE = 1GiB
## DEFAULT_TINY_BACKUP_STOR_SIZE = 1GiB
##
## LV_SZ_LOG = 3GiB
## LV_SZ_SCRATCH = 2GiB
## RABBIT_LV = 2GiB
## DEFAULT_EXTENSION_STOR_SIZE = 1GiB
## TINY_KUBERNETES_DOCKER_STOR_SIZE = 20GiB
## TINY_DOCKER_DISTRIBUTION_STOR_SIZE = 8GiB
## TINY_ETCD_STOR_SIZE = 1GiB
## TINY_KUBELET_STOR_SIZE = 2GiB
##
## MINIMUM_PLATFORM_PV_SIZE = (1 + 2*1 + 1 + 3 + 2 + 2 + 1 + 20 + 8 + 1 + 2)GiB = 43GiB
##
## MINIMUM_TINY_DISK_SIZE = MINIMUM_PLATFORM_PV_SIZE + PART_SZ_ROOT + PART_SZ_EFI + PART_SZ_BOOT + FLUXDATA + BACKUP_SIZE
## = 43 + 20 + 0.03 + 0.5 + 20 + 1 = 85GiB
# TODO: create a log representing 'free space" on self expand partition.
# TODO: Do the math for this new environment
# The default disk size thresholds must align with the ones in
# config/.../sysinv/common/constants.py
# which are DEFAULT_SMALL_DISK_SIZE
# MINIMUM_SMALL_DISK_SIZE
default_small_disk_size=240
minimum_small_disk_size=196
sz=\$(blockdev --getsize64 \${INSTDEV})
ilog "Install disk \${INSTDEV} has size:\${sz}B, \$((\${sz}/\$gib))GiB"
# Round MINIMUM_PLATFORM_PV_SIZE to the closest upper value that can be divided by 1024.
if [ \${sz} -gt \$((\${default_small_disk_size}*\${gib})) ] ; then
ilog "Large disk: MINIMUM_PLATFORM_PV_SIZE=219GiB*1024=224256 MiB"
export BACKUP_DEFAULT_PERSISTENT_SIZE=30000
elif [ \${sz} -ge \$((\${minimum_small_disk_size}*\${gib})) ] ; then
ilog "Small disk: MINIMUM_PLATFORM_PV_SIZE=164GiB*1024=167936 MiB"
export BACKUP_DEFAULT_PERSISTENT_SIZE=30000
else
ilog "Tiny disk: MINIMUM_PLATFORM_PV_SIZE=43GiB*1024=44032 MiB"
# Using a disk with a size under 85GiB will fail.
export LV_SZ_LOG=3000
export LV_SZ_SCRATCH=2000
export BACKUP_DEFAULT_PERSISTENT_SIZE=1000
fi
}
#########################################################################
# Name : get_std_controller_provisioning_sizes
# Purpose : Provide partition, physical volume, and logical volume sizes
# Parameter: None
# Return : Nothing, but exports key values
#########################################################################
function get_std_controller_provisioning_sizes()
{
## NOTE: updates to partition sizes need to be also reflected in
## _controller_filesystem_limits() in sysinv/api/controllers/v1/istorconfig.py
# Partitions
export PART_SZ_EFI=300
export PART_SZ_BOOT=2048
export PART_SZ_ROOT=0
export BACKUP_DEFAULT_PERSISTENT_SIZE=30000
# Logical volumes
export LV_SZ_LOG=8000
export LV_SZ_ROOT=20480
export LV_SZ_SCRATCH=16000
export LV_SZ_VAR=20480
}
#########################################################################
# Name : get_worker_provisioning_sizes
# Purpose : Provide partition, physical volume, and logical volume sizes
# Parameter: None
# Return : Nothing, but exports key values
#########################################################################
function get_worker_provisioning_sizes()
{
# miniboot: unused
ilog get_worker_provisioning_sizes
}
#########################################################################
# Name : get_storage_provisioning_sizes
# Purpose : Provide partition, physical volume, and logical volume sizes
# Parameter: None
# Return : Nothing, but exports key values
#########################################################################
function get_storage_provisioning_sizes()
{
# miniboot: unused
ilog get_storage_provisioning_sizes
}
#########################################################################
# Name : parse_miniboot_network_params
# Purpose : Setup IP addressing for two cases:
# 1) initial boot and 2) persistent across reboot
# Parameter: operation: one of 'initial' or 'persistent'
# Return : Nothing
#########################################################################
function parse_miniboot_network_params()
{
BOOTPARAM_MGMT_ADDRESS_FAMILY=
BOOTPARAM_IP_ADDR=
BOOTPARAM_VLAN=
BOOTPARAM_GW=
BOOTPARAM_PREFIX_LEN=
BOOTPARAM_IFNAME=
BOOTPARAM_IP_VER=
BOOTPARAM_METRIC=
BOOTPARAM_DNS=
# Parse values from /proc/cmdline
local ipstring=
local vlan=
for arg in \$(cat /proc/cmdline); do
case "\${arg}" in
ip=*)
ipstring=\${arg:3}
ilog "Using ip=\$ipstring"
;;
vlan=*)
vlan=\${arg:5}
ilog "Using vlan=\${vlan}"
;;
esac
done
ilog "Parsing boot ipstring=\$ipstring"
# Now we have a string like:
# <client-ip>,,<gw-ip>,<prefixlen>,<hostname>,<device>,off,<dns0-ip>,<dns1-ip>
# 1 2 3 4 5 6 7 8 9
# identify if ipv4 or ipv6, and get the ip address
#
# 10.10.10.22,,10.10.10.1,23,subcloud2,enp2s1,none (for ipv4)
# [2620:10a:a001:d41::212],,,64,subcloud3,ens1f0.401,none (for ipv6)
BOOTPARAM_IP_ADDR=\$(echo \$ipstring | awk -F',' '{print \$1}' | tr -d '\[\]')
BOOTPARAM_GW=\$(echo \$ipstring | awk -F',' '{print \$3}' | tr -d '\[\]')
BOOTPARAM_PREFIX_LEN=\$(echo \$ipstring | awk -F',' '{print \$4}')
hostname=\$(echo \$ipstring | awk -F',' '{print \$5}')
BOOTPARAM_IFNAME=\$(echo \$ipstring | awk -F',' '{print \$6}')
# Do not setup DNS for now - we use IP addresses during boot:
# BOOTPARAM_DNS=\$(echo \$ipstring | awk -F',' '{print \$8}')
case "\$ipstring" in
*'['*)
# if has [ ] then it is ipv6:
BOOTPARAM_MGMT_ADDRESS_FAMILY="inet6"
BOOTPARAM_IP_VER="-6"
BOOTPARAM_METRIC="metric 1"
;;
*)
BOOTPARAM_MGMT_ADDRESS_FAMILY="inet"
;;
esac
if [ -n "\${vlan}" ]; then
# Parameter format: "bootstrap_interface.bootstrap_vlan:bootstrap_interface"
dlog "Parsing vlan from \${vlan}"
vlan=\${vlan#*.} # remove prefix 'bootstrap_interface.'
vlan=\${vlan%:*} # remove suffix ':bootstrap_interface'
BOOTPARAM_VLAN=\${vlan}
BOOTPARAM_IFNAME=\${BOOTPARAM_IFNAME%.*} # remove suffix '.bootstrap_vlan'
fi
logmsg="Using IP values: ip:\$BOOTPARAM_IP_ADDR, family: \$BOOTPARAM_MGMT_ADDRESS_FAMILY"
if [ -n "\$BOOTPARAM_VLAN" ]; then
logmsg="\$logmsg vlan: \$BOOTPARAM_VLAN, "
fi
logmsg="\$logmsg prefix:\$BOOTPARAM_PREFIX_LEN, ifname: \$BOOTPARAM_IFNAME, "
if [ -n "\${BOOTPARAM_GW}" ]; then
logmsg="\$logmsg gw:\$BOOTPARAM_GW, "
fi
logmsg="\$logmsg metric: \$BOOTPARAM_METRIC, dns: \$BOOTPARAM_DNS"
ilog "\$logmsg"
export BOOTPARAM_MGMT_ADDRESS_FAMILY
export BOOTPARAM_IP_ADDR
export BOOTPARAM_VLAN
export BOOTPARAM_GW
export BOOTPARAM_PREFIX_LEN
export BOOTPARAM_IFNAME
export BOOTPARAM_IP_VER
export BOOTPARAM_METRIC
export BOOTPARAM_DNS
}
#########################################################################
# Name : wait_for_interface
# Purpose : Wait for interface to settle
# Parameter: interface name
# Return : Nothing
#########################################################################
function wait_for_interface()
{
local ifname=\$1
local timeout=\${2:-60}
local operstate=
local count_sec=0
ilog "Waiting for interface \${ifname} to settle... [timeout: \${timeout}s]"
while [ \${count_sec} -lt \${timeout} ]; do
sleep 1
if [ -e /sys/class/net/\${mgmt_dev}/operstate ]; then
operstate=\$(cat /sys/class/net/\${mgmt_dev}/operstate)
if [ "\$operstate" = up ]; then
ilog "\${mgmt_dev} operstate: up"
return
fi
dlog "\${mgmt_dev} operstate: \$operstate"
fi
count_sec=\$(( count_sec + 1 ))
done
case "\$operstate" in
unknown)
# see: https://www.kernel.org/doc/Documentation/networking/operstates.txt
wlog "Timeout: \${mgmt_dev} operstate: unknown. Allowing boot to continue."
return
;;
*)
report_failure_with_msg "Timeout waiting for interface \${ifname} to settle; operstate: \$operstate"
;;
esac
}
##########################################################################
# Global Kickstart Constants #
##########################################################################
#
# NOTE: exported Variables from other segments are NOT visible from functions
#
# Log the server firmware type
if [ -d /sys/firmware/efi ] ; then
ilog "UEFI Firmware execution"
USE_UEFI_PARTITIONS=1
else
ilog "BIOS Firmware execution"
USE_UEFI_PARTITIONS=0
fi
if [ "\${controller}" = true ] ; then
# Legacy locations of the backup partition
BACKUP_PART_UEFI=1
BACKUP_PART_BIOS=2
# Set the expected locations of the backup partition
if [ "\$USE_UEFI_PARTITIONS" = 0 ] ; then
BACKUP_PART_NO=\${BACKUP_PART_BIOS}
else
BACKUP_PART_NO=\${BACKUP_PART_UEFI}
fi
BACKUP_PART_LABEL="platform_backup"
# Note that the BA5EBA11-0000-1111-2222- is the prefix used by STX and it's
# defined in sysinv constants.py. Since the 000000000001 suffix is used by
# custom stx LVM partitions, the next suffix is used for the persistent backup
# partition (000000000002)
BACKUP_PART_GUID="BA5EBA11-0000-1111-2222-000000000002"
fi
# Node Personality Trait
TRAIT__CONTROLLER="controller"
TRAIT__STORAGE="storage"
TRAIT__WORKER="worker"
TRAIT__LOWLATENCY="lowlatency"
# System Types
SYSTEM_TYPE__AIO="All-in-one"
SYSTEM_TYPE__STANDARD="Standard"
# Node Subfunctions
SUBFUNCTION__CONTROLLER="\${TRAIT__CONTROLLER}"
SUBFUNCTION__STORAGE="\${TRAIT__STORAGE}"
SUBFUNCTION__WORKER="\${TRAIT__WORKER}"
SUBFUNCTION__AIO="\${TRAIT__CONTROLLER},\${TRAIT__WORKER}"
VOLUME_GROUPS="cgts-vg"
EOF
###############################
# END of Common Functions Block
###############################
chmod 755 /tmp/lat/ks_functions.sh
HOOK_LABEL="ks-early"
. /tmp/lat/ks_functions.sh
##########################################################################
# Global Kickstart variables #
##########################################################################
export debug=0
export prefix=""
# Assume there is no Platform Backup (persistent) Partition
export BACKUP_PART_FOUND=0
export BACKUP_PART_CURRENT_SIZE=0
export STOR_DEV_FDS=""
export PROC_SELF_FDS="$(ls -1 /proc/$$/fd | egrep -v "^(0|1|2|255)$" | xargs)"
for fd in ${PROC_SELF_FDS}; do
export realpath=$(readlink -f /proc/$$/fd/"${fd}")
if [ -e "${realpath}" ]; then
STOR_DEV_FDS="${STOR_DEV_FDS} ${fd}"
fi
done
##########################################################################
# Local Kickstart variables #
##########################################################################
BACKUP_PART_FIRST=0
BACKUP_PART_END=0
BACKUP_PART_SIZE=0
BACKUP_PART_FLAGS=0
BACKUP_PART_NAME=""
##########################################################################
ilog "*****************************************************"
ilog "*** Pre Partition - Volume Remove & Wipe Disk ***"
ilog "*****************************************************"
if [ -z "${traits}" ] ; then
report_failure_with_msg "No install traits specified ; need boot arg traits=<controller|worker|storage|lowlatency>"
fi
ilog "Waiting for disks to be available"
udevadm settle --timeout=300 || report_failure_with_msg "udevadm settle failed"
ilog "Disks became available"
export controller=false
export storage=false
export worker=false
export lowlatency=false
export aio=false
for trait in ${traits//,/ }; do
# dlog "trait:${trait}"
case ${trait} in
"controller") controller=true ;;
"storage") storage=true ;;
"worker") worker=true ;;
"lowlatency") lowlatency=true ;;
*) wlog "unknown trait '${trait}'" ;;
esac
done
# Force enable 'lowlatency' trait if the realtime kernel is detected ; PREEMPT_RT
uname=$(uname -a)
if [[ "${uname}" == *"PREEMPT_RT"* ]] ; then
if [ "${lowlatency}" = false ] ; then
wlog "forcing lowlatency trait after discovering the RT kernel"
lowlatency=true
fi
fi
# Handle trait conbination errors
#
# Handle no valid nodetypes specified
if [ "${controller}" = false -a "${storage}" = false -a "${worker}" = false ] ; then
report_failure_with_msg "No valid install traits specified ; ${traits} ; need boot arg traits=<controller|worker|storage>"
# Storage and controller don't go together
elif [ "${storage}" = true -a "${controller}" = true ] ; then
report_failure_with_msg "Cannot combine storage and controller traits"
# Storage and lowlatency don't go together
elif [ "${storage}" = true -a "${lowlatency}" = true ] ; then
report_failure_with_msg "Cannot combine storage and lowlatency traits"
# Storage and worker don't go together
elif [ "${storage}" = true -a "${worker}" = true ] ; then
report_failure_with_msg "Cannot combine storage and worker traits"
else
ilog "Install traits: $traits"
fi
# setup the install type for the log prefix
if [ "${controller}" = true -a "${worker}" = true ] ; then
aio=true
prefix="${SYSTEM_TYPE__AIO}"
elif [ "${controller}" = true ] ; then
prefix="${TRAIT__CONTROLLER}"
elif [ "${worker}" = true ] ; then
report_failure_with_msg "Invalid miniboot subcloud traits: $traits"
elif [ "${storage}" = true ] ; then
report_failure_with_msg "Invalid miniboot subcloud traits: $traits"
fi
if [ "${lowlatency}" = true ] ; then
prefix="${prefix}-${TRAIT__LOWLATENCY}"
fi
grep -q 'debug_kickstart' /proc/cmdline
if [ $? -eq 0 ]; then
debug=1
fi
# First, parse /proc/cmdline to find the boot args
set -- `cat /proc/cmdline`
ilog "/proc/cmdline:$*"
# for I in $*; do case "$I" in *=*) eval $I 2>/dev/null;; esac; done
for arg in $*; do
case "$arg" in
*=*)
eval $arg 2>/dev/null
log "arg : $arg"
;;
esac
done
# Handle persistent_size setting.
# If the persistent_size is less than the size of the existing persistent backup,
# then the installation process must terminate and exit.
if [ -n "${persistent_size}" ]; then
part=$(readlink -f "/dev/disk/by-partlabel/platform_backup")
device=$(readlink -f "${rootfs_device}")
ilog "Persistent backup is in ${part}"
MAX_SIZE=$(parted -s ${device} unit MiB print | grep "Disk ${device}:" | awk '{print $3}' | sed 's/[^C0-9]*//g')
CURRENT_PERSISTENT_SIZE=$(parted -s ${part} unit MiB print | grep ${part} | awk '{print $3}' | sed 's/[^C0-9]*//g')
ilog "Current size of persistent backup is ${CURRENT_PERSISTENT_SIZE}"
ilog "Max size of ${device} is ${MAX_SIZE}"
if [ ${persistent_size} -lt ${CURRENT_PERSISTENT_SIZE} ]; then
ilog "Provided persistent_size (${persistent_size}) is less than ${CURRENT_PERSISTENT_SIZE}"
report_failure_with_msg "Persistent size setting is less than current backup size (${CURRENT_PERSISTENT_SIZE})"
fi
if [ ${persistent_size} -gt ${MAX_SIZE} ]; then
ilog "Provided persistent_size (${persistent_size}) is greater than ${MAX_SIZE}"
report_failure_with_msg "Persistent size setting is greater than maximum allowable size (${MAX_SIZE})"
fi
fi
# Note: This is equivalent to pre_disk_setup_common.cfg
# Name : check_execs
# Purpose: Confirm all the executables required by the kickstart are present
# Returns: 1 of one or more executable are missing
REQUIRED_EXECS="bc blkid dd lvcreate mkfs.ext4 partprobe pvremove pvs sgdisk vgcreate wipefs"
function check_execs()
{
missing_exec=0
for x in ${REQUIRED_EXECS} ; do
which ${x} > /dev/null 2>&1
if [ ${?} -ne 0 ] ; then
elog "dependency check failed ; required '${x}' exec is missing"
missing_exec=1
fi
done
return ${missing_exec}
}
# Log Traits
[ "${controller}" = true ] && ilog "Controller Function"
[ "${storage}" = true ] && ilog "Storage Function"
[ "${worker}" = true ] && ilog "Worker Function"
[ "${lowlatency}" = true ] && ilog "Low Latency Function"
# Log System Type
if [ ${aio} = true ] ; then
ilog "system"
else
ilog "${SYSTEM_TYPE__STANDARD} system"
fi
# Verify that all the required executables are presenty
check_execs
[ $? -ne 0 ] && report_failure_with_msg "Required executables are missing"
####################################################
# pre_common_head (obsolete with lat)
####################################################
# TODO: The installer does not have 'timezone'
# Does LAT handle this ?
wlog "timezone not set ; 'timezone --nontp --utc UTC'"
# We need both the system date and hwclock to be "close" to the current
# date/time, in order to avoid cases of invalid SSL certificates during
# interaction with the system controller. With the 'instdate'
# boot paramter, the system clock will already be initialized by LAT.
# If the hwclock differs from system date by a significant amount then
# we update it here based on the current system date.
#
# System date initialization summary:
# Note: NTP is not running at these early stages of install
#
# miniboot:
# - The system date is initialized to 'instdate' via LAT.
# Note that this may be several minutes out of sync with reality
# since instdate is a snapshot at time of bootimage.iso creation.
#
# ostree boot (after miniboot, prior to subcloud bootstrap):
# - The system date is initialized via hwclock.
#
# During miniboot we may have the case where the hwclock is more accurate
# than the system date. We therefore only want to adjust the hwclock if
# it is significantly different.
if [ -n "${instdate}" ]; then
ilog "Checking hwclock: $(hwclock), current date: $(date), instdate: $(date --date=${instdate})"
# Only adjust if date mismatch is > 20m
date_mismatch_threshold_secs=1200
current_date_epoch=$(date "+%s")
hwclock_date_epoch=$(date --date="$(hwclock --get --utc)" "+%s")
diff_epoch=$(( current_date_epoch - hwclock_date_epoch ))
# absolute value: strip off any '-' from front of string:
abs_diff_epoch=${diff_epoch#-}
if [ ${abs_diff_epoch} -gt ${date_mismatch_threshold_secs} ]; then
if [ -e /sbin/hwclock ] ; then
ilog "Aligning hwclock to system date"
/sbin/hwclock --systohc --utc
if [ $? -ne 0 ]; then
wlog "failed hwclock command ; /sbin/hwclock --systohc --utc [rc=${rc}]"
fi
else
wlog "lat initrd is missing /sbin/hwclock"
fi
ilog "System date is now: $(date), hwclock: $(hwclock)"
fi
else
elog "bootimage.iso was constructed without instdate: subcloud date may be out of sync"
fi
true
%end
# Pre Partition - Pre Disk Setup Common Script
%pre-part --interpreter=/bin/bash
HOOK_LABEL="pre-part"
. /tmp/lat/ks_functions.sh
#####################################################
# From pre_net_common.cfg for system node installs
#####################################################
if is_system_node_install -eq 0 ; then
# Setup ntp.conf and sync time
cat <<EOF >/etc/ntp_kickstart.conf
server pxecontroller
EOF
if [ -e /usr/sbin/ntpd ] ; then
/usr/sbin/ntpd -g -q -n -c /etc/ntp_kickstart.conf
rc=$?
if [ ${rc} -eq 0 ]; then
if [ -e /sbin/hwclock ] ; then
/sbin/hwclock --systohc --utc
if [ $? -ne 0 ]; then
wlog "failed hwclock command ; /sbin/hwclock --systohc --utc"
else
ilog "ntpd and hwclock set ok"
fi
else
wlog "lat initrd is missing /sbin/hwclock"
fi
else
wlog "ntpd setup failed rc:$rc ; /usr/sbin/ntpd -g -q -n -c /etc/ntp_kickstart.conf"
fi
else
wlog "lat initrd is missing /usr/sbin/ntpd"
fi
fi
#####################################################
# From pre_disk_setup_common.cfg
#####################################################
if [ -n "${INSTDEV}" ] ; then
persistent_instdev=$(get_persistent_disk "${INSTDEV}")
if [ -z ${persistent_instdev} ] ; then
report_failure_with_msg "invalid install device ${INSTDEV}"
else
ilog "Install device: ${INSTDEV} : ${persistent_instdev}"
fi
fi
# Get all block devices of type disk in the system.
# This includes solid state devices.
# Note: /dev/* are managed by kernel tmpdevfs while links in
# /dev/disk/by-path/ are managed by udev which updates them
# asynchronously so avoid using them while performing partition
# operations.
ilog "Detected storage devices:"
case ${persistent_instdev} in
*"by-id"*)
disk_regex='/dev/disk/by-id/wwn-*'
;;
*)
disk_regex='/dev/disk/by-path/*'
;;
esac
STOR_DEVS=""
for f in ${disk_regex} ; do
dev=$(readlink -f $f)
# dlog "found device ${f}"
exec_retry 2 0.5 "lsblk --nodeps --pairs $dev" | grep -q -e 'TYPE="disk"' -e 'TYPE="mpath"'
if [ $? -eq 0 ]; then
# Filter out ISO disk from storage devices
check_valid_dev $dev || continue
STOR_DEVS="$STOR_DEVS $dev"
ilog "Adding ${f} -> ${dev} to managed device list"
fi
done
# Filter STOR_DEVS variable for any duplicates as on some systems udev
# creates multiple links to the same device. This causes issues due to
# attempting to acquire a flock on the same device multiple times.
STOR_DEVS=$(echo "$STOR_DEVS" | xargs -n 1 | sort -u | xargs)
ilog "Unique storage devices: $STOR_DEVS"
if [ -z "$STOR_DEVS" ] ; then
report_failure_with_msg "No storage devices available."
fi
# Lock all devices so that udev doesn't trigger a kernel partition table
# rescan that removes and recreates all /dev nodes for partitions on those
# devices. Since udev events are asynchronous this could lead to a case
# where /dev/ links for existing partitions are briefly missing.
# Missing /dev links leads to command execution failures.
for dev in $STOR_DEVS; do
exec {fd}>$dev || report_failure_with_msg "Error creating file descriptor for $dev."
flock -n "$fd" || report_failure_with_msg "Can't get a lock on fd $fd of device $dev."
STOR_DEV_FDS="$STOR_DEV_FDS $fd"
ilog "Locked ${dev} fd:${fd}"
done
# Log info about system state at beginning of partitioning operation
for dev in $STOR_DEVS; do
ilog "Initial partition table for $dev is:"
# log "Initial partition table for $dev is:"
parted -s $dev unit mib print
# parted -s $dev unit mib print >> ${LOGFILE}
done
display_volume_info "before"
display_mount_info
# Consider removing since LAT already handles this failure mode
# Ensure specified device is not a USB drive
udevadm info --query=property --name="${INSTDEV}" | grep -q '^ID_BUS=usb'
if [ $? -eq 0 ]; then
report_failure_with_msg "Specified installation (${INSTDEV}) device is a USB drive."
fi
# Log the disk setup
ilog "Volume Groups : ${VOLUME_GROUPS} ; $STOR_DEV_FDS"
# update lvm.conf to prevent udev delays for locked devices
sed -i "s#obtain_device_list_from_udev = 1#obtain_device_list_from_udev = 0#" /etc/lvm/lvm.conf
# Deactivate existing volume groups to avoid Anaconda issues with pre-existing groups
vgs=( $(exec_no_fds "$STOR_DEV_FDS" "vgdisplay -C --noheadings -o vg_uuid 2>/dev/null") )
if [ ${#vgs[@]} -eq 0 ] ; then
ilog "No volume groups found"
else
for vg in ${vgs[@]}; do
ilog "Disable volume group ${vg}"
exec_no_fds "$STOR_DEV_FDS" "vgchange -an --select vg_uuid=${vg} 2>/dev/null" 5 0.5
[ $? -ne 0 ] && report_failure_with_msg "Failed to disable ${vg}."
done
for vg in ${vgs[@]}; do
vg_name=$(exec_no_fds "$STOR_DEV_FDS" "vgdisplay -C --noheadings --select vg_uuid=${vg} -o vg_name 2>/dev/null" | xargs)
pvs=( $(exec_no_fds "$STOR_DEV_FDS" "pvs --select vg_uuid=${vg} --noheadings -o pv_name 2>/dev/null" | grep -v unknown) )
if [ ${#pvs[@]} -ne 0 ] ; then
ilog "Remove logical volumes from ${vg_name} (${vg})"
exec_no_fds "$STOR_DEV_FDS" "lvremove --force --select vg_uuid=${vg} 2>/dev/null" 5 0.5 || wlog "WARNING: Failed to remove lvs on ${vg_name} (${vg})."
for pv in ${pvs[@]}; do
ilog "Remove physical volume ${pv} from ${vg_name} (${vg})"
exec_no_fds "$STOR_DEV_FDS" "pvremove --force --force --yes ${pv} 2>/dev/null" 5 0.5
[ $? -ne 0 ] && report_failure_with_msg "Failed to remove ${pv}."
done
fi
ilog "Force remove volume group ${vg_name} (${vg})"
exec_no_fds "$STOR_DEV_FDS" "vgremove --force --select vg_uuid=${vg} 2>/dev/null" 5 0.5
[ $? -ne 0 ] && report_failure_with_msg "Failed to remove ${vg_name} (${vg})."
done
fi
display_volume_info "after"
display_mount_info
ONLYUSE_HDD=""
part_type_guid_str="Partition GUID code"
part_type_name_str="Partition name"
part_type_size_str="Partition size"
part_type_first_str="First sector"
part_type_end_str="Last sector"
part_type_flags_str="Attribute flags"
# The /v1/upgrade/${hostname}/in_upgrade endpoint accepts any textual data
# as hostname and returns system-wide upgrade state
hostname="hostname"
if [ "$(curl -sf http://pxecontroller:6385/v1/upgrade/${hostname}/in_upgrade 2>/dev/null)" = "true" ]; then
# In an upgrade, only wipe the disk with the rootfs and boot partition
wlog "In upgrade, wiping only ${INSTDEV}"
WIPE_HDD=${INSTDEV}
ONLYUSE_HDD="$(basename ${INSTDEV})"
else
# Make a list of all the hard drives that are to be wiped.
# Never put the LAT install disk '${INSTDEV}' in that list.
WIPE_HDD=""
# Partition type OSD has a unique globally identifier
CEPH_OSD_GUID="4FBD7E29-9D25-41B8-AFD0-062C0CEFF05D"
CEPH_OSD_MPATH_GUID="4FBD7E29-8AE0-4982-BF9D-5A8D867AF560"
CEPH_JOURNAL_GUID="45B0969E-9B03-4F30-B4C6-B4B80CEFF106"
CEPH_JOURNAL_MPATH_GUID="45B0969E-8AE0-4982-BF9D-5A8D867AF560"
# Check if we wipe OSDs
if [ "$(curl -sf http://pxecontroller:6385/v1/ihosts/wipe_osds 2>/dev/null)" = "true" ]; then
ilog "Wipe OSD data"
WIPE_CEPH_OSDS="true"
else
ilog "Skip Ceph OSD data wipe."
WIPE_CEPH_OSDS="false"
fi
for dev in $STOR_DEVS ; do
# TODO: Allowing the install dev 'in' results in a failure mode where
# every second install fails with the following error string
# and unrecoverable mount failure.
#
# Logs:
#
# Warning: The kernel is still using the old partition table.
# The new table will be used at the next reboot or after you
# run partprobe(8) or kpartx(8)
# and then
#
# Failure:
#
# mount: /sysroot: can't find LABEL=otaroot.
#
# Action: Find correct place to put partprobe
#
# Avoid wiping the install root disk
# [ ${dev} == ${INSTDEV} ] && continue
# Avoid wiping USB drives
udevadm info --query=property --name=$dev |grep -q '^ID_BUS=usb' && continue
# Avoid wiping ceph osds if sysinv tells us so
if [ ${WIPE_CEPH_OSDS} == "false" ]; then
wipe_dev="true"
exec_no_fds "$STOR_DEV_FDS" "pvs" | grep -q "$dev *ceph"
if [ $? -eq 0 ]; then
wlog "skip rook provisoned disk $dev"
continue
fi
part_numbers=( `parted -s $dev print | awk '$1 == "Number" {i=1; next}; i {print $1}'` )
# Scanning the partitions looking for CEPH OSDs and
# skipping any disk found with such partitions
for part_number in "${part_numbers[@]}"; do
sgdisk_part_info=$(sgdisk -i $part_number $dev)
part_type_guid=$(echo "$sgdisk_part_info" | grep "$part_type_guid_str" | awk '{print $4;}')
if [ "$part_type_guid" == $CEPH_OSD_GUID -o "$part_type_guid" == $CEPH_OSD_MPATH_GUID ]; then
wlog "OSD found on $dev, skipping wipe"
wipe_dev="false"
break
fi
dev_part_prefix=$(get_part_prefix "${dev}")
exec_no_fds "$STOR_DEV_FDS" "pvs" | grep -q -e "${dev_part_prefix}${part_number} *ceph" -e "${dev_part_prefix}p${part_number} *ceph"
if [ $? -eq 0 ]; then
wlog "Rook OSD found on $dev_part_prefix$part_number, skip wipe"
wipe_dev="false"
break
fi
done
if [ "$wipe_dev" == "false" ]; then
continue
fi
fi
# Add device to the wipe list
devname=$(basename $dev)
if [ -e $dev -a "$ISO_DEV" != "../../$devname" -a "$USB_DEV" != "../../$devname" ]; then
ilog "Adding ${dev} to list of disks to be wiped"
if [ -n "$WIPE_HDD" ]; then
ilog "WIPE_HDD=$WIPE_HDD,$dev"
WIPE_HDD=$WIPE_HDD,$dev
else
ilog "WIPE_HDD=$dev"
WIPE_HDD=$dev
fi
fi
done
ilog "Not in upgrade"
fi
ilog "==========="
ilog "WIPE DISKs: ${WIPE_HDD}"
ilog "==========="
inst_dev=$(get_disk "${INSTDEV}")
for dev in ${WIPE_HDD//,/ } ; do
ilog "Wiping $dev"
# Clear previous GPT tables or LVM data on each disk.
#
# Rule: Exclude the persistent 'Platform backup' partition.
# Note: Delete the first few bytes at the start and end of the partition.
# This is required with GPT partitions because they save partition
# info at both the start and the end of the block.
# Get a list of partitions for this disk
part_numbers=( $(parted -s $dev print | awk '$1 == "Number" {i=1; next}; i {print $1}') )
# For each device partition apply wipe rules
for part_number in "${part_numbers[@]}"; do
sgdisk_part_info=$(sgdisk -i $part_number $dev)
part_name=$(echo "$sgdisk_part_info" | grep "$part_type_name_str" | awk '{print $3;}')
# special handling for the install device
if [ "${dev}" == "${inst_dev}" ] ; then
# Skip over the bios, efi and boot partitions that got us here.
# LAT handles these partitions
case ${part_name} in
"'bios'" | "'otaefi'" | "'otaboot'" | "'otaboot_b'")
ilog "skipping ${part_name} on partition ${part_number} of device ${dev}"
continue
;;
*)
dlog "wipe candidate ${part_name} on partition ${part_number} of device ${dev}"
;;
esac
fi
part=$(get_part_prefix "${dev}")$part_number
if [ "${controller}" = true ] ; then
# Skip if we already found a valid partition, look otherwise
[ ${BACKUP_PART_FOUND} -eq 1 ] && continue
ilog "Looking for platform-backup partition on $part from ... instdev=${INSTDEV} device=${inst_dev} persistent_device=${persistent_instdev}"
sgdisk_part_info=$(sgdisk -i $part_number $dev)
part_type_guid=$(echo "$sgdisk_part_info" | grep "$part_type_guid_str" | awk '{print $4;}')
dlog "Examining part_number=${part_number}, by_dev=${by_dev}, dev=${dev}, part_type_guid: ${part_type_guid}"
dlog "sgdisk_part_info: ${sgdisk_part_info}"
dlog "BACKUP_PART_GUID: ${BACKUP_PART_GUID}"
if [ "$dev" == "${inst_dev}" -a "$part_type_guid" == $BACKUP_PART_GUID ] ; then
part_type_name=$(echo "$sgdisk_part_info" | grep "$part_type_name_str" | awk '{print $3,$4;}')
BACKUP_PART_NAME=${part_type_name:1:-1}
part_type_first=$(echo "$sgdisk_part_info" | grep "$part_type_first_str" | awk '{print $3;}')
BACKUP_PART_FIRST=${part_type_first}
part_type_end=$(echo "$sgdisk_part_info" | grep "$part_type_end_str" | awk '{print $3;}')
BACKUP_PART_END=${part_type_end}
part_type_size=$(echo "$sgdisk_part_info" | grep "$part_type_size_str" | awk '{print $3;}')
BACKUP_PART_SIZE=${part_type_size}
part_type_flags=$(echo "$sgdisk_part_info" | grep "$part_type_flags_str" | awk '{print $3;}')
BACKUP_PART_FLAGS=${part_type_flags}
ilog "Discovered persistent backup partition: ${part} [${BACKUP_PART_NAME}:${BACKUP_PART_FIRST}:${BACKUP_PART_END}:${BACKUP_PART_SIZE}:${part_type_guid}]"
# Only keep a backup partition that is in the expected location
# and contains a proper filesystem
if [ "${part_number}" == "${BACKUP_PART_NO}" ] ; then
part_fstype=$(exec_retry 5 0.5 "blkid -s TYPE -o value $part")
if [ "${part_fstype}" == "ext4" ]; then
BACKUP_PART_CURRENT_SIZE=$(parted -s ${part} unit MiB print | grep ${part} | awk '{print $3}' | sed 's/[^C0-9]*//g')
BACKUP_PART_FOUND=1
ilog "Discovered persistent backup partition, ${part} [${BACKUP_PART_CURRENT_SIZE} MiB], is in the expected location and is formatted correctly. Maintaining..."
continue
else
ilog "Discovered persistent backup partition, ${part}, has a missing 'ext4' filesystem . Recreating..."
fi
else
# Make sure we only recreate the backup partition on systems that are
# known to be invalid. Detect a potential switch in BIOS vs. UEFI and
# exit with an appropriate message.
ilog "Discovered persistent backup partition, ${part}, is in an unexpected location. Expected on partition ${BACKUP_PART_NO}."
if [ "$USE_UEFI_PARTITIONS" = 0 ] ; then
# BIOS boot...
if [ "${part_number}" == "${BACKUP_PART_UEFI}" ] ; then
# Found a UEFI location for platform backup
report_failure_with_msg "BIOS booted system has a persistent backup partition in a UEFI expected location. Wipe disks or boot system in UEFI mode."
else
ilog "BIOS booted system has an invalid installation. Recreating "
fi
else
# UEFI boot...
if [ "${part_number}" == "${BACKUP_PART_BIOS}" ] ; then
# Found a BIOS location for platform backup
report_failure_with_msg "UEFI booted system has a persistent backup partition in a BIOS expected location. Wipe disks or boot system in BIOS mode."
else
ilog "UEFI booted system has an invalid installation. Recreating "
fi
fi
fi
fi
fi
if [ "${WIPE_CEPH_OSDS}" = "true" ] && ([ "${part_type_guid}" = "${CEPH_JOURNAL_GUID}" ] || [ "${part_type_guid}" = "${CEPH_MPATH_JOURNAL_GUID}" ]); then
# Journal partitions require additional wiping. Based on the ceph-manage-journal.py
# script in the integ repo (at the ceph/ceph/files/ceph-manage-journal.py location)
# wiping 100MB of data at the beginning of the partition should be enough. We also
# wipe 100MB at the end, just to be safe.
ilog "Wiping Ceph ${part_name} on ${part} start and end with dd"
dd if=/dev/zero of=$part bs=1M count=100 2>/dev/null
dd if=/dev/zero of=$part bs=1M count=100 seek=$(( `blockdev --getsz $part` / (1024 * 2) - 100 )) 2>/dev/null
else
ilog "Wiping ${part_name} on ${part} start and end with dd"
dd if=/dev/zero of=$part bs=512 count=34 2>/dev/null
dd if=/dev/zero of=$part bs=512 count=34 seek=$((`blockdev --getsz $part` - 34)) 2>/dev/null
fi
done
if [ ${BACKUP_PART_FOUND} -eq 0 -o "${dev}" != "${inst_dev}" ] ; then
ilog "Creating disk label for $dev"
parted -s $dev mktable gpt
ilog "... done"
fi
done
ilog "Ensure any LAT installer root/boot partitions are zapped/wiped"
for oldrootlabel in otaroot otaroot_1 otaroot_b otaroot_b_1 ; do
oldrootpart=$(blkid --label $oldrootlabel)
[ -z "$oldrootpart" ] && continue
oldinstdev=/dev/$(lsblk $oldrootpart -n -o pkname)
ilog "... destroying ${oldrootpart} on ${oldinstdev}"
# sgdisk - Command-line GUID partition table (GPT) manipulator
# Zap the entire partition
ilog "... zapping ${oldinstdev}"
sgdisk -Zo ${oldinstdev}
# partprobe - inform the OS of partition table changes
# root@(none):/# partprobe /dev/sda -s
# /dev/sda: gpt partitions 1 2 3 4 5 6
ilog "... probing ${oldinstdev}"
partprobe ${oldinstdev}
# wipefs - wipe a signature from a device
ilog "... wiping ${oldinstdev}"
wipefs --all --backup ${oldinstdev}
done
# Override installer variable to not prompt for erasing the disk
export INSTW=0
ilog "Setting up initial IP address for ostree pull"
parse_miniboot_network_params
mgmt_dev=${BOOTPARAM_IFNAME}
mgmt_vlan=${BOOTPARAM_VLAN}
mgmt_address_family=${BOOTPARAM_MGMT_ADDRESS_FAMILY}
if [ -z "${mgmt_vlan}" ] ; then
# NO VLAN
if [ "$mgmt_address_family" = "inet" ]; then
ilog "ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR}/${BOOTPARAM_PREFIX_LEN} dev ${mgmt_dev}"
ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR}/${BOOTPARAM_PREFIX_LEN} dev ${mgmt_dev}
else
ilog "ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR} dev ${mgmt_dev}"
ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR} dev ${mgmt_dev}
fi
ilog "ip ${BOOTPARAM_IP_VER} link set dev ${mgmt_dev} up"
ip ${BOOTPARAM_IP_VER} link set dev ${mgmt_dev} up
if [ -z "${BOOTPARAM_GW}" ]; then
# No gateway
ilog "ip ${BOOTPARAM_IP_VER} route add default dev ${mgmt_dev} ${BOOTPARAM_METRIC}"
ip ${BOOTPARAM_IP_VER} route add default dev ${mgmt_dev} ${BOOTPARAM_METRIC}
else
ilog "Setting up default route:"
ilog "ip ${BOOTPARAM_IP_VER} route add default via ${BOOTPARAM_GW} dev ${mgmt_dev} ${BOOTPARAM_METRIC}"
ip ${BOOTPARAM_IP_VER} route add default via ${BOOTPARAM_GW} dev ${mgmt_dev} ${BOOTPARAM_METRIC}
fi
wait_for_interface ${mgmt_dev} 60
ilog "ip addr:"
ip addr show
ilog "ip route:"
ip ${BOOTPARAM_IP_VER} route show
else
# VLAN CONFIG
mgmt_iface=vlan${mgmt_vlan}
ilog "mgmt_dev=${mgmt_dev}"
ilog "mgmt_iface=vlan${mgmt_vlan}"
ilog "mgmt_address_family: ${mgmt_address_family}"
ilog "ip ${BOOTPARAM_IP_VER} link add link ${mgmt_dev} name $mgmt_iface type vlan id ${mgmt_vlan}"
ip ${BOOTPARAM_IP_VER} link add link ${mgmt_dev} name $mgmt_iface type vlan id ${mgmt_vlan}
if [ "${mgmt_address_family}" = "inet" ]; then
ilog "ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR}/${BOOTPARAM_PREFIX_LEN} dev ${mgmt_iface}"
ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR}/${BOOTPARAM_PREFIX_LEN} dev ${mgmt_iface}
else
ilog "ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR} dev ${mgmt_iface}"
ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR} dev ${mgmt_iface}
fi
ilog "ip ${BOOTPARAM_IP_VER} link set up dev ${mgmt_dev}"
ip ${BOOTPARAM_IP_VER} link set up dev ${mgmt_dev}
# TODO(kmacleod) change to wait_for_interface 60:
sleep 15
ilog "ip ${BOOTPARAM_IP_VER} link set up dev ${mgmt_iface}"
ip ${BOOTPARAM_IP_VER} link set up dev ${mgmt_iface}
# TODO(kmacleod) change to wait_for_interface 60:
ilog "Wait 10s to settle interface..."
sleep 10
if [ -z "${BOOTPARAM_GW}" ]; then
# No gateway
ilog "ip ${BOOTPARAM_IP_VER} route add default dev ${mgmt_iface} ${BOOTPARAM_METRIC}"
ip ${BOOTPARAM_IP_VER} route add default dev ${mgmt_iface} ${BOOTPARAM_METRIC}
else
ilog "Setting up default route:"
ilog "ip ${BOOTPARAM_IP_VER} route add default via ${BOOTPARAM_GW} dev ${mgmt_iface} ${BOOTPARAM_METRIC}"
ip ${BOOTPARAM_IP_VER} route add default via ${BOOTPARAM_GW} dev ${mgmt_iface} ${BOOTPARAM_METRIC}
fi
ilog "ip ${BOOTPARAM_IP_VER} addr:"
ip ${BOOTPARAM_IP_VER} addr show
ilog "ip ${BOOTPARAM_IP_VER} route:"
ip ${BOOTPARAM_IP_VER} route show
fi
# get the nameserver
local dns="none"
for e in \${dns}; do
echo "nameserver \${e}" > /etc/resolv.conf
done
true
%end
###########################################################################
%part --interpreter=/bin/bash
HOOK_LABEL=" part"
. /tmp/lat/ks_functions.sh
ilog "*****************************************"
ilog "*** Partition - Partition Disks ***"
ilog "*****************************************"
inst_dev=$(get_disk "${INSTDEV}")
###########################################################
# From pre_disk_controller.cfg
###########################################################
function check_partitioning_status() {
start_sec=$(($end_sec+1))
part_no=$((part_no+1))
if [ $start_sec -gt $last ] ; then
report_failure_with_msg "Disk is not big enough for requested layout (start_sec: $start_sec, last: $last)"
fi
}
if [ "$BIOSPLUSEFI" = 1 ] ; then
ilog "BIOSPLUSEFI=1 configuration is requested"
if [ "${controller}" = true -a "$USE_UEFI_PARTITIONS" = 1 ] ; then
ilog "WARNING: UEFI booted and installed controllers will NOT have a BIOS MBR partition due to partitioning patterns established in previous releases."
fi
fi
MIB_BYTES=$((1024*1024))
# Start common partitioning regardless of personality
sgdisk_parts=""
# Get the logical sector size used for determining partition boundaries
LOGICAL_SECTOR_SZ=`lsblk -n ${inst_dev} -o LOG-SEC -d`
# Zap the GPT/MBR information
sgdisk -Z ${inst_dev}
# Get the first aligned sector
first=`sgdisk -F ${inst_dev} | grep -v Creating`
# Get the last aligned sector
export last=$(sgdisk -E ${inst_dev} 2>/dev/null |grep -v Creating)
ilog "Allocate host partitions on ${inst_dev} with first sector: $first and last sector: $last"
# Maintain BIOS partition mappings from previous releases
start_sec=$first
part_no=1
if [ "$USE_UEFI_PARTITIONS" = 0 -o "${controller}" = false ] ; then
# 1MB size for BIOS boot partition
BIOSSZ=1
end_sec=$(($start_sec+(${BIOSSZ}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:bios -t $part_no:EF02"
check_partitioning_status
fi
if [ "${controller}" = true ] ; then
if [ "${aio}" = true ] ; then
get_aio_controller_provisioning_sizes
ilog "AIO Controller: MINIMIZING root disk space allocation"
else
get_std_controller_provisioning_sizes
ilog "STD Controller: MAXIMIZING root disk space allocation"
fi
# Only controllers have a persistent backup partition
# Use current partition size if it has been detected
if [ ${BACKUP_PART_CURRENT_SIZE} -gt 0 ]; then
BACKUP_SIZE=${BACKUP_PART_CURRENT_SIZE}
else
BACKUP_SIZE=${BACKUP_DEFAULT_PERSISTENT_SIZE}
fi
export BACKUP_SIZE
# Check for a bootline override and allocate platform backup partition
if [ -z "$persistent_size" ]; then
# Default backup partition size in MiB
ilog "Platform Backup persistent size not on command line ; defaulting to ${BACKUP_SIZE}"
else
ilog "Using Platform Backup persistent size from boot command: ${persistent_size}"
BACKUP_SIZE=${persistent_size}
fi
backup_part_extension_required=0
if [ ${BACKUP_PART_CURRENT_SIZE} -gt 0 ]; then
# Reconcile current backup partition size against BACKUP_SIZE
if [ ${BACKUP_SIZE} -eq ${BACKUP_PART_CURRENT_SIZE} ] ; then
ilog "Platform Backup partition size is unchanged: ${BACKUP_SIZE} MiB."
elif [ ${BACKUP_SIZE} -gt ${BACKUP_PART_CURRENT_SIZE} ] ; then
# We need to extend the existing partition - this is done after the partitions are recreated
backup_part_extension_required=1
else
# Do not allow shrinking of backup partition
report_failure_with_msg "Cannot shrink platform backup smaller than existing ${BACKUP_PART_CURRENT_SIZE} MiB"
fi
fi
ilog "Platform Backup partition size: ${BACKUP_SIZE}"
if [ ${BACKUP_PART_FOUND} -eq 0 ] ; then
ilog "Platform Backup partition not detected: CREATING"
else
ilog "Platform Backup Partition was detected: PERSISTING"
fi
dlog "BACKUP_SIZE=${BACKUP_SIZE} after persistent_size=${persistent_size}, backup_part_extension_required=${backup_part_extension_required}"
end_sec=$(($start_sec+(${BACKUP_SIZE}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:${BACKUP_PART_LABEL} -t $part_no:${BACKUP_PART_GUID}"
check_partitioning_status
elif [ "${worker}" = true ] ; then
ilog "Setting up platform_pv partition sizes for worker node"
get_worker_provisioning_sizes
elif [ "${storage}" = true ] ; then
ilog "Setting up platform_pv partition sizes for storage node"
get_storage_provisioning_sizes
fi
ilog "PART_SZ_EFI : ${PART_SZ_EFI}"
ilog "PART_SZ_BOOT : ${PART_SZ_BOOT}"
ilog "PART_SZ_ROOT : ${PART_SZ_ROOT}"
# 300 MiB size for EFI boot partition to align with previous releases
end_sec=$(($start_sec+(${PART_SZ_EFI}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:otaefi -t $part_no:EF00"
check_partitioning_status
# Boot/Root OSTree Partition A (Note: OSTree Partition B not used)
if [ "${PART_SZ_BOOT}" != 0 ] ; then
end_sec=$(($start_sec+(${PART_SZ_BOOT}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:otaboot"
check_partitioning_status
fi
if [ "${PART_SZ_ROOT}" != 0 ] ; then
if [ "$INSTAB" = 0 -a "${INSTFLUX}" = 0 ] ; then
if [ "$VSZ" = 0 ] ; then
report_failure_with_msg "Installation with VSZ=0 is not supported."
else
end_sec=$(($start_sec+(${PART_SZ_ROOT}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
fi
sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:otaroot"
else
end_sec=$(($start_sec+(${PART_SZ_ROOT}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:otaroot"
fi
check_partitioning_status
fi
# Flux Partition
if [ "${LV_SZ_VAR}" = 0 -a "${INSTFLUX}" = 1 ] ; then
if [ "$VSZ" = 0 ] ; then
report_failure_with_msg "Installation with VSZ=0 is not supported."
else
end_sec=$(($start_sec+(${VSZ}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
fi
sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:fluxdata"
check_partitioning_status
fi
# Allocate platform pv
ilog "platform_pv partition - using all remaining disk space"
end_sec=$last
sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:platform_pv -t $part_no:8E00"
STOR_DEVS=$(echo "$STOR_DEVS" | xargs -n 1 | sort -u | xargs)
[ -z "$STOR_DEVS" ] && report_failure_with_msg "No storage devices available."
ilog "STOR_DEV_FDS Updated ; $STOR_DEV_FDS"
# CREATE PARTITIONS
dlog "Requesting ${inst_dev} Partition Table: ${a}"
dlog "Executing: sgdisk ${sgdisk_parts} -p ${inst_dev}"
sgdisk $sgdisk_parts -p ${inst_dev}
rc=$?
[ ${rc} -ne 0 ] && report_failure_with_msg "sgdisk failed to create partitions: ${a} [rc=${rc}]"
if [ "${backup_part_extension_required}" -ne 0 ]; then
instdev_part_prefix=$(get_part_prefix "${inst_dev}")
# The backup partition has been increased via persistent_size.
# Extend the partition and resize the FS
wlog "Platform Backup partition: resizing ${instdev_part_prefix}${BACKUP_PART_NO} from ${BACKUP_PART_CURRENT_SIZE}MiB to ${BACKUP_SIZE}MiB"
e2fsck -p -f ${instdev_part_prefix}${BACKUP_PART_NO}
rc=$?
# Handle e2fsck exit code, non-zero can still indicate success:
# 0 - No errors
# 1 - File system errors corrected
# 2 - File system errors corrected, system should be rebooted
# > 2 are all hard failures (see man e2fsck)
# Include 2 as a failure in our case, since it should only happen if the filesystem
# is mounted while e2fsck is run (not a valid scenario here).
[ ${rc} -gt 1 ] && report_failure_with_msg "e2fsck failed on platform backup partition [rc=${rc}]"
resize2fs -f ${instdev_part_prefix}${BACKUP_PART_NO}
rc=$?
[ ${rc} -ne 0 ] && report_failure_with_msg "Failed to resize ext4 fs of platform backup partition [rc=${rc}]"
fi
true
%end
###########################################################################
%mkfs --interpreter=/bin/bash
HOOK_LABEL="mkfs"
. /tmp/lat/ks_functions.sh
ilog "***************************************************"
ilog "*** Mkfs - Format Partitions & LVM Volumes ***"
ilog "***************************************************"
#######################################################
# From pre_disk_aio
######################################################
vg="volume group"
lv="logical volume"
dev=$(get_disk "${INSTDEV}")
dev_part_prefix=$(get_part_prefix "${dev}")
if [ "${controller}" = true ] ; then
if [ "${aio}" = true ] ; then
get_aio_controller_provisioning_sizes
else
get_std_controller_provisioning_sizes
fi
else
report_failure_with_msg "Unsupported install type: only Standard or All-in-one is supported"
fi
# Maintain BIOS partition mappings from previous releases
part_no=1
if [ "$USE_UEFI_PARTITIONS" = 0 -o "${controller}" = false ] ; then
# No formating for the BIOS boot partition
part_no=$((part_no+1))
fi
if [ "${controller}" = true ] ; then
ilog "BACKUP_SIZE : ${BACKUP_SIZE}"
ilog "BACKUP_PART_NO : ${BACKUP_PART_NO}"
ilog "BACKUP_PART_LABEL : ${BACKUP_PART_LABEL}"
ilog "BACKUP_PART_GUID : ${BACKUP_PART_GUID}"
ilog "BACKUP_PART : ${dev_part_prefix}${BACKUP_PART_NO}"
# Only init Platform Backup partition filesystem if the partition was just created
if [ ${BACKUP_PART_FOUND} -eq 0 ] ; then
ilog "Platform Backup Partition was CREATED. Initialize filesystem on ${dev_part_prefix}${BACKUP_PART_NO}"
mkfs.ext4 -F -L ${BACKUP_PART_LABEL} ${dev_part_prefix}${BACKUP_PART_NO}
[ ${?} -ne 0 ] && report_failure_with_msg "Failed Platform Backup partition filesystem init ${dev_part_prefix}${BACKUP_PART_NO}"
else
# Preserving the contents of the backup partition, but make sure it's labeled correctly
e2label ${dev_part_prefix}${BACKUP_PART_NO} ${BACKUP_PART_LABEL}
fi
part_no=$((part_no+1))
fi
# Maintain UEFI partition mappings from previous releases
mkfs.vfat -n otaefi ${dev_part_prefix}${part_no}
[ ${?} -ne 0 ] && report_failure_with_msg "Failed UEFI filesystem init: ${dev_part_prefix}${part_no}, rc=${?}"
part_no=$((part_no+1))
# Boot/Root OSTree Partition A (Note: OSTree Partition B not used)
if [ "${PART_SZ_BOOT}" != 0 ] ; then
mkfs.ext4 -F -L otaboot ${dev_part_prefix}${part_no}
[ ${?} -ne 0 ] && report_failure_with_msg "Failed Boot filesystem init: ${dev_part_prefix}${part_no}, rc=${?}"
part_no=$((part_no+1))
fi
if [ "${PART_SZ_ROOT}" != 0 ] ; then
mkfs.ext4 -F -L otaroot ${dev_part_prefix}${part_no}
[ ${?} -ne 0 ] && report_failure_with_msg "Failed Root filesystem init: ${dev_part_prefix}${part_no}, rc=${?}"
part_no=$((part_no+1))
fi
# Flux Partition
if [ "${LV_SZ_VAR}" = 0 -a "${INSTFLUX}" = 1 ] ; then
mkfs.ext4 -F -L fluxdata ${dev_part_prefix}${part_no}
[ ${?} -ne 0 ] && report_failure_with_msg "Failed Fluxdata (/var) filesystem init: ${dev_part_prefix}${part_no}, rc=${?}"
part_no=$((part_no+1))
fi
# Log important LVM config settings
log_lvm_conf "Installer Initial" /etc/lvm/lvm.conf
# Create Volume Group
pv_part=${dev_part_prefix}${part_no}
ilog "Install disk: ${INSTDEV}"
ilog "Current disk: ${dev} ; current partition index: $part_no"
ilog "LV_SZ_LOG (cgts--vg-log--lv size): ${LV_SZ_LOG} MB"
ilog "LV_SZ_ROOT (cgts--vg-root--lv) : ${LV_SZ_ROOT} MB"
ilog "LV_SZ_SCRATCH (cgts--vg-scratch--lv) : ${LV_SZ_SCRATCH} MB"
ilog "LV_SZ_VAR (cgts--vg-var--lv) : ${LV_SZ_VAR} MB"
ilog "Wipe any previous signatures from the platform physical volume ${pv_part}"
wipefs -a ${pv_part}
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to wipe signatures from ${pv_part}, rc=${?}"
ilog "Create ${vg} 'cgts-vg' ${pv_part} ; $STOR_DEV_FDS"
exec_no_fds "$STOR_DEV_FDS" "vgcreate -y --force cgts-vg ${pv_part} 2>/dev/null" 5 0.5
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${vg} 'cgts-vg' ${pv_part}"
if [ "${LV_SZ_ROOT}" != 0 ] ; then
# Create and Init the '/' logical volume
ilog "Create ${lv} 'root-lv' ; $STOR_DEV_FDS"
exec_no_fds "$STOR_DEV_FDS" "lvcreate -y -Wy -Zy -n root-lv --size ${LV_SZ_ROOT}MB cgts-vg 2>/dev/null" 5 0.5
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${lv} 'root-lv'"
ilog "InitFs ${lv} 'root-lv'"
mkfs.ext4 -F /dev/cgts-vg/root-lv
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to init ${lv} 'root-lv'"
fi
if [ "${LV_SZ_VAR}" != 0 ] ; then
# Create and Init the '/' logical volume
ilog "Create ${lv} 'var-lv' ; $STOR_DEV_FDS"
exec_no_fds "$STOR_DEV_FDS" "lvcreate -y -Wy -Zy -n var-lv --size ${LV_SZ_ROOT}MB cgts-vg 2>/dev/null" 5 0.5
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${lv} 'root-lv'"
ilog "InitFs ${lv} 'var-lv'"
mkfs.ext4 -F /dev/cgts-vg/var-lv
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to init ${lv} 'root-lv'"
fi
# Create and Init the '/var/log' logical volume
ilog "Create ${lv} 'log-lv' ; $STOR_DEV_FDS"
exec_no_fds "$STOR_DEV_FDS" "lvcreate -y -Wy -Zy -n log-lv --size ${LV_SZ_LOG}MB cgts-vg 2>/dev/null" 5 0.5
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${lv} 'log-lv'"
ilog "InitFs ${lv} 'log-lv'"
mkfs.ext4 -F /dev/cgts-vg/log-lv
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to init ${lv} 'log-lv'"
# Create and init the '/scratch' logical volume
ilog "Create ${lv} 'scratch-lv' ; $STOR_DEV_FDS"
exec_no_fds "$STOR_DEV_FDS" "lvcreate -y -Wy -Zy -n scratch-lv --size ${LV_SZ_SCRATCH}MB cgts-vg 2>/dev/null" 5 0.5
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${lv} 'scratch-lv'"
ilog "InitFs ${lv} 'scratch-lv'"
mkfs.ext4 -F /dev/cgts-vg/scratch-lv
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to init ${lv} 'scratch-lv'"
#######################################################################
# From post_lvm_on_rootfs.cfg (all hosts)
#######################################################################
# uncomment the global_filter line in lvm.conf
perl -0777 -i.bak -pe 's:(# This configuration option has an automatic default value\.\n)\t# global_filter:$1 global_filter:m' /etc/lvm/lvm.conf
perl -0777 -i -pe 's:(# Example\n)\t# preferred_names:$1 preferred_names:m' /etc/lvm/lvm.conf
# Get the LVM disk partition and add it to the lvm.conf file
export LV_ROOTDISK=$(exec_no_fds "$STOR_DEV_FDS" "pvdisplay --select 'vg_name=cgts-vg' -C -o pv_name --noheadings" | xargs)
[ -z ${LV_ROOTDISK} ] && report_failure_with_msg "Failed to identify logical volume rootdisk via pvdisplay"
# Edit the LVM config so LVM only looks for LVs on ${LV_ROOTDISK}
ilog "Edit the LVM config so LVM only looks for LVs on the root disk"
sed -i "s#^\( *\)global_filter = \[.*#\1global_filter = [ \"a|${LV_ROOTDISK}|\", \"r|.*|\" ]#" /etc/lvm/lvm.conf
# Log important LVM config settings
log_lvm_conf "Installer Updated" /etc/lvm/lvm.conf
#####################################################################
# From pre_disk_setup_tail.cfg
#####################################################################
# Close all FDs and wait for udev to reshuffle all partitions.
ilog "Releasing storage device locks and FDs."
for fd in $STOR_DEV_FDS
do
flock -u "$fd"
exec {fd}>&-
done
sleep 2
udevadm settle --timeout=300 || report_failure_with_msg "udevadm settle failed"
#lsblk -o name,mountpoint,label,size,uuid
# Rescan LVM cache to avoid warnings for VGs that were recreated.
pvscan --cache 2>/dev/null
# Stage the ostree_repo in /sysroot for network installations
# of controller nodes. Doing so avoids a double ostree pull of
# the huge ostree_repo over the network.
if is_usb_install -eq 0 ; then
ilog "USB Install"
else
ilog "Network Install"
##################################################################
#
# System node installs of worker and storage nodes are installed
# over the network rather than from a staged archive.
# This is because these node types do not have/need a local feed.
#
##################################################################
if [ "${controller}" = true ] ; then
ilog "Controller Install"
##############################################################
#
# Controller node network installs pull the ostree_repo from
# the pxeboot server's feed directory in 'archive' mode into
# /sysroot as a local staging location. In this case LAT's
# INSTL (install) variable is updated to install from that
# local stage.
#
# This is done to avoid a second (double) ostree_repo pull
# over the network that would otherwise be needed to populate
# the controller's feed directory.
#
# This staged ostree_repo archive is later moved to the
# controller's feed directory to be used for future installs
# of other system nodes from this controller.
#
##############################################################
ilog "OSTREE_ROOT_DEVICE: ${OSTREE_ROOT_DEVICE}"
ilog "OSTREE_VAR_DEVICE : ${OSTREE_VAR_DEVICE}"
PHYS_SYSROOT="/sysroot"
mkdir -p ${PHYS_SYSROOT}
mount -o rw,noatime "${OSTREE_ROOT_DEVICE}" "${PHYS_SYSROOT}" || elog "Error mounting ${OSTREE_ROOT_DEVICE}"
repo="${PHYS_SYSROOT}/var/www/pages/feed/rel-xxxPLATFORM_RELEASExxx/ostree_repo"
mkdir -p "${repo}"
# If we have already prestaged ostree_repo in /opt/platform-backup,
# then we should use that repo instead of downloading off of the system controller.
backup_device=/dev/disk/by-partlabel/platform_backup
backup_mount=/tmp/platform-backup
ilog "Temporary backup mount is ${backup_mount}"
mkdir -p "${backup_mount}"
mount "${backup_device}" "${backup_mount}" 2>/dev/null
# If ostree_repo is found at the mounted backup directory,
# then set the ostree url to its location.
remote_insturl=
if [ -e ${backup_mount}/ostree_repo ]; then
local_repo_check_fail=
# Calculate local checksum and compare
checksum_file=${backup_mount}/.ostree_repo_checksum
if [ -f "${checksum_file}" ]; then
checksum_from_file=$(cat "${checksum_file}")
ilog "Verifying checksum for prestaged ${backup_mount}/ostree_repo"
pushd ${backup_mount} > /dev/null
checksum=$(find ostree_repo -type f -exec md5sum {} + | LC_ALL=C sort | md5sum | awk '{ print $1; }')
popd > /dev/null
if [ "${checksum}" = "${checksum_from_file}" ]; then
ilog "Verified ostree checksum: ${checksum}"
else
elog "ostree checksum failed on ${backup_mount}/ostree_repo"
elog "Calulated checksum: ${checksum}"
elog "File checksum: ${checksum_from_file}"
local_repo_check_fail=true
fi
else
# No prestage checksum file is available. Use ostree fsck instead.
# The only problem with this is the length of time required for fsck to complete.
wlog "No ostree checksum file at ${checksum_file}. Performing ostree fsck instead."
if ! ostree --repo="${backup_mount}/ostree_repo" fsck; then
elog "ostree fsck failed on prestaged ${backup_mount}/ostree_repo: reverting to remote pull"
local_repo_check_fail=true
fi
fi
if [ -z "${local_repo_check_fail}" ]; then
# Preserve remote_insturl for use in 2nd ostree pull below
remote_insturl=${insturl}
insturl="file:///${backup_mount}/ostree_repo"
ilog "Setting insturl to ${insturl} to use prestaged ostree_repo"
else
# Remove the corrupted ostree_repo.
# Avoid setting insturl which will revert to using a remote pull
elog "ostree integrity check failed: removing prestaged ${backup_mount}/ostree_repo"
rm -rf "${backup_mount}/ostree_repo"
elog "ostree integrity check failed: reverting to remote pull"
fi
fi
# Tell LAT to install from this local stage
# i.e. override where LAT installs from.
export instl=${repo}
export INSTL=${instl}
ostree --repo=${repo} init --mode=archive
if [ "${insturl}" = "file://NOT_SET" ] ; then
ilog "ostree_repo archive pull from file:///instboot/ostree_repo"
ostree --repo=${repo} remote add ${instbr} file:///instboot/ostree_repo
else
ilog "ostree_repo archive pull from ${insturl}"
ostree --repo=${repo} remote add ${instbr} ${insturl}
fi
# Check for noverifyssl in boot arguments.
# Note: even if noverifyssl is not set, we still don't have proper support
# for SSL certificates (which would require configuring cert paths here).
if grep -q noverifyssl /proc/cmdline 2>/dev/null; then
ilog "Configuring ostree for unverified SSL"
ostree config --repo=${repo} set "remote \"${instbr}\"".tls-permissive true
fi
ilog "Executing: ostree --repo=${repo} pull --depth=-1 --mirror ${instbr}:${instbr}"
ostree --repo=${repo} pull --depth=-1 --mirror ${instbr}:${instbr}
rc=$?
if [ $rc -ne 0 ]; then
report_failure_with_msg "ostree pull failed, rc=$rc"
fi
if [ -n "${remote_insturl}" ]; then
# In this case, we've initialized our ostree repo from local disk
# store - either via prestaging or due to installing from ISO.
# We now perform an extra ostree pull from the system controller
# in order to pick up any patch commits.
ilog "ostree_repo archive pull from ${remote_insturl} for patch commits"
# Set feed ostree remote "starlingx" to point to active controller's feed ostree repo
ilog "Replacing ostree feed remote with: ${remote_insturl} ${instbr}"
ostree --repo=${repo} remote delete ${instbr}
ostree --repo=${repo} remote add ${instbr} ${remote_insturl} ${instbr}
if grep -q noverifyssl /proc/cmdline 2>/dev/null; then
ilog "Configuring ostree for unverified SSL"
ostree config --repo=${repo} set "remote \"${instbr}\"".tls-permissive true
fi
ilog "Executing ostree pull from ${remote_insturl}:"
ilog "ostree --repo=${repo} pull --depth=-1 --mirror ${instbr}:${instbr}"
ostree --repo=${repo} pull --depth=-1 --mirror ${instbr}:${instbr}
rc=$?
if [ $rc -ne 0 ]; then
report_failure_with_msg "ostree pull failed, rc=$rc"
fi
fi
ilog "ostree log for ${repo}, branch=${instbr}:"
ostree --repo=${repo} log ${instbr}
umount ${backup_mount}
umount ${PHYS_SYSROOT}
fi
fi
# Important: To align with installer expectations of where otaefi will reside,
# reset the value of p1
if [ "${controller}" = true ] ; then
if [ "$USE_UEFI_PARTITIONS" = 0 ] ; then
# BIOS firmware execution
# Number Start (sector) End (sector) Size Code Name
# 1 2048 4095 1024.0 KiB EF02 bios
# 2 4096 61444095 29.3 GiB FFFF platform_backup
# 3 61444096 62058495 300.0 MiB EF00 otaefi
#
p1=3
else
# UEFI firmware execution
# Number Start (sector) End (sector) Size Code Name
# 1 2048 61442047 29.3 GiB FFFF platform_backup
# 2 61442048 62056447 300.0 MiB EF00 otaefi
p1=2
# LAT installer will attempt to write the legacy BIOS grub information
# after exiting from this hook. Skip it, in this case, as we don't have
# a BIOS boot partition
export BIOSPLUSEFI=0
fi
elif [ "${worker}" = true -o "${storage}" = true ] ; then
# UEFI and BIOS firmware execution
# Number Start (sector) End (sector) Size Code Name
# 1 2048 4095 1024.0 KiB EF02 bios
# 2 4096 618495 300.0 MiB EF00 otaefi
p1=2
fi
# Important: Set fs_dev needed by the installer for mounting/updating the efi
# partition
fs_dev=${dev_part_prefix}
true
%end
###########################################################################
%post --interpreter=/bin/bash
HOOK_LABEL="post"
. /tmp/lat/ks_functions.sh
ilog "*********************************************************"
ilog "**** Post - Add user/groups **"
ilog "*********************************************************"
# Set password for root to 'root'
usermod -p '$6$hEv/K.fPeg/$ezIWhJPrMG3WtdEwqQRdyBwdYmPZkqW2PONFAcDd6TqWliYc9dHAwW4MFTlLanVH3/clE0/34FheDMpbAqZVG.' root
# Remove admin user whether it exists or not
deluser admin || true
# Create the sysadmin user
useradd sysadmin -m --shell /bin/bash -G sudo --password 4SuW8cnXFyxsk
chage -d 0 sysadmin
# add 'nobody' group
groupadd nobody
# Reload /etc/group- to make systemd-sysusers.service happy
/usr/sbin/grpconv || report_failure_with_msg "Failed to convert from shadow passwords and groups"
%end
%post --interpreter=/bin/bash
HOOK_LABEL="post"
. /tmp/lat/ks_functions.sh
ilog "*********************************************************"
ilog "*** Post - Traits & Platform Config File update ***"
ilog "*********************************************************"
# Set node traits' state
[ "${controller}" = true ] && ilog "Controller Function"
[ "${storage}" = true ] && ilog "Storage Function"
[ "${worker}" = true ] && ilog "Worker Function"
[ "${lowlatency}" = true ] && ilog "Low Latency Function"
[ "${controller}" = true -a ${worker} = true ] && aio=true
# Parse traits to nodetype, subfunction and system_type
# -----------------------------------------------------
# Set nodetype from traits
if [ "${controller}" = true ] ; then
nodetype=${TRAIT__CONTROLLER}
elif [ "${storage}" = true ] ; then
nodetype=${TRAIT__STORAGE}
elif [ "${worker}" = true ] ; then
nodetype=${TRAIT__WORKER}
fi
ilog "nodetype=${nodetype}"
# Set system type and subfunction
subfunction=""
system_type=""
[ "${controller}" = true -a "${worker}" = true ] && aio=true
if [ "${aio}" = true ] ; then
ilog "${SYSTEM_TYPE__AIO} System"
system_type="${SYSTEM_TYPE__AIO}"
subfunction="${SUBFUNCTION__AIO}"
if [ "${lowlatency}" = true ] ; then
ilog "Setting aio lowlatency"
ln -s /usr/share/systemd-presets/lowlatency.preset /etc/systemd/system-preset/10-aio.preset
else
ln -s /usr/share/systemd-presets/aio.preset /etc/systemd/system-preset/10-aio.preset
fi
else
ilog "${SYSTEM_TYPE__STANDARD} System"
system_type="${SYSTEM_TYPE__STANDARD}"
if [ "${worker}" = true ] ; then
subfunction=${SUBFUNCTION__WORKER}
if [ "${lowlatency}" = true ] ; then
ilog "Setting ${SUBFUNCTION__WORKER} lowlatency"
ln -s /usr/share/systemd-presets/worker-lowlatency.preset /etc/systemd/system-preset/10-${SUBFUNCTION__WORKER}.preset
else
ln -s /usr/share/systemd-presets/worker.preset /etc/systemd/system-preset/10-${SUBFUNCTION__WORKER}.preset
fi
elif [ "${storage}" = true ] ; then
subfunction=${SUBFUNCTION__STORAGE}
ilog "Setting ${SUBFUNCTION__STORAGE} preset"
ln -s /usr/share/systemd-presets/storage.preset /etc/systemd/system-preset/10-${SUBFUNCTION__STORAGE}.preset
else
subfunction=${SUBFUNCTION__CONTROLLER}
ilog "Setting ${SUBFUNCTION__CONTROLLER} preset"
ln -s /usr/share/systemd-presets/controller.preset /etc/systemd/system-preset/10-${SUBFUNCTION__CONTROLLER}.preset
fi
fi
if [ "${lowlatency}" = true ] ; then
subfunction="${subfunction},${TRAIT__LOWLATENCY}"
fi
ilog "subfunction=${subfunction}"
ilog "system_type=${system_type}"
#################################################################
# From post_platform_conf_controller.cfg
# From post_platform_conf_aio.cfg
# From post_platform_conf_aio_lowlatency.cfg
#################################################################
ilog "create platform.conf and set personality traits"
[ ! -d "/etc/platform" ] && mkdir -p -m 0775 /etc/platform
cat <<EOF > ${PLATFORM_CONF}
nodetype=${nodetype}
subfunction=${subfunction}
system_type=${system_type}
EOF
ilog "Create systemd presets and set personality traits"
systemctl daemon-reload
systemctl --preset-mode=full preset-all
##############################################################
# From post_pxeboot_controller
# From post_net_common.cfg
# ############################################################
# Set http port
# Persist the default http port number to platform configuration.
# This will get overwritten when by manifest during sw configuration phase.
if [[ "${insturl}" == *"http"* ]] ; then
http_port=$(echo $(cat /proc/cmdline |xargs -n1 echo |grep '^insturl=' | sed -r 's#^[^/]*://[^/]*:([0-9]*)/.*#\1#'))
else
http_port=8080
fi
update_platform_conf "http_port=${http_port}"
#############################################################
# From post_common.cfg (all hosts)
#############################################################
rm /etc/hostname
# TODO: is this needed with LAT ??
# If using a serial install make sure to add a getty on the tty1
conarg=`cat /proc/cmdline |xargs -n1 echo |grep console= |grep ttyS`
if [ -n "$conarg" ] ; then
echo "1:2345:respawn:/sbin/mingetty tty1" >> /etc/inittab
fi
blkid >> ${LOGFILE}
# TODO: See if other post_common.cfg content is needed
true
%end
###########################################################################
%post --interpreter=/bin/bash
HOOK_LABEL="post"
. /tmp/lat/ks_functions.sh
ilog "*************************************"
ilog "*** Post - Set Kernel Args ***"
ilog "*************************************"
###########################################################
# From post_kernel_controller.cfg
# From post_kernel_aio_worker.cfg
###########################################################
. /etc/platform/platform.conf
# Prepare the disk boot kernel comand line
# ----------------------------------------
KERN_OPTS="${KERNEL_PARAMS}"
ilog "Building up KERN_OPTS: ${KERN_OPTS}"
function add_kernel_option()
{
option="${1}"
ilog "... adding: ${option}"
# avoid adding leading space on first option
if [ "${KERN_OPTS}" = "" ] ; then
KERN_OPTS="${option}"
else
KERN_OPTS="${KERN_OPTS} ${option}"
fi
}
# If the installer asked us to use security related kernel params, use
# them in the grub line as well (until they can be configured via puppet)
security_feature=""
# Handle security options
# TODO: Create a list and loop over it
security_options="nopti nospectre_v2 nospectre_v1"
for o in ${security_options}
do
grep -q ${o} /proc/cmdline
if [ $? -eq 0 ]; then
add_kernel_option "${o}"
if [ "${security_feature}" = "" ] ; then
security_feature="${o}"
else
security_feature="${security_feature} ${o}"
fi
fi
done
[ "${KERN_OPTS}" != "" ] && ilog "Learned kernel params: ${KERN_OPTS}"
ilog "Adding kernel options"
if [ "${aio}" = true -o "${worker}" = true ] ; then
if [ -e /etc/init.d/cpumap_functions.sh ] ; then
# Update grub with custom kernel bootargs
source /etc/init.d/cpumap_functions.sh
n_cpus=$(cat /proc/cpuinfo 2>/dev/null | \
awk '/^[pP]rocessor/ { n +=1 } END { print (n>0) ? n : 1}')
ilog "cpumap: n_cpus:${n_cpus}"
n_numa=$(ls -d /sys/devices/system/node/node* 2>/dev/null | wc -l)
ilog "cpumap: n_numa:${n_numa}"
KERN_OPTS="${KERN_OPTS} iommu=pt"
KERN_OPTS="${KERN_OPTS} hugepagesz=2M hugepages=0 default_hugepagesz=2M"
# If this is an all-in-one system, we need at least 4 CPUs
if [ "${aio}" = true -a ${n_cpus} -lt 4 ]; then
report_failure_with_msg "At least 4 CPUs are required for ${SYSTEM_TYPE__AIO} node."
fi
# Add kernel options for cpu isolation / affinity
if [ ${n_cpus} -gt 1 ] ; then
base_cpulist=$(platform_expanded_cpu_list)
ilog "cpumap: base_cpulist: ${base_cpulist}"
base_cpumap=$(cpulist_to_cpumap ${base_cpulist} ${n_cpus})
ilog "cpumap: base_cpumap: ${base_cpumap}"
avp_cpulist=$(vswitch_expanded_cpu_list)
ilog "cpumap: avp_cpulist:${avp_cpulist}"
if [ -e /etc/vswitch/vswitch.conf ] ; then
# Update vswitch.conf
sed -i "s/^VSWITCH_CPU_LIST=.*/VSWITCH_CPU_LIST=\"${avp_cpulist}\"/" /etc/vswitch/vswitch.conf
else
wlog "Missing /etc/vswitch/vswitch.conf ; update bypassed"
fi
norcu_cpumap=$(invert_cpumap ${base_cpumap} ${n_cpus})
ilog "cpumap: norcu_cpumap:${norcu_cpumap}"
norcu_cpulist=$(cpumap_to_cpulist ${norcu_cpumap} ${n_cpus})
ilog "cpumap: norcu_cpulist:${norcu_cpulist}"
if [ "${lowlatency}" = true ]; then
KERN_OPTS="${KERN_OPTS} nohz_full=${norcu_cpulist}"
fi
KERN_OPTS="${KERN_OPTS} rcu_nocbs=${norcu_cpulist}"
KERN_OPTS="${KERN_OPTS} kthread_cpus=${base_cpulist}"
KERN_OPTS="${KERN_OPTS} irqaffinity=${norcu_cpulist}"
fi
else
wlog "Missing /etc/init.d/cpumap_functions.sh ; cpumap setup bypassed"
fi
# Add kernel options to set NMI watchdog
if [ "${lowlatency}" = true ] ; then
add_kernel_option "nmi_watchdog=0 softlockup_panic=0"
else
add_kernel_option "nmi_watchdog=panic,1 softlockup_panic=1"
fi
if [[ "$(dmidecode -s system-product-name)" =~ ^ProLiant.*Gen8$ ]]; then
add_kernel_option "intel_iommu=on,eth_no_rmrr"
else
add_kernel_option "intel_iommu=on"
fi
# Add kernel options to disable kvm-intel.eptad on Broadwell
# Broadwell: Model: 79, Model name: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz
if grep -q -E "^model\s+:\s+79$" /proc/cpuinfo
then
add_kernel_option "kvm-intel.eptad=0"
fi
# Add kernel option to avoid jiffies_lock contention on real-time kernel
if [ "${lowlatency}" = true ] ; then
add_kernel_option "skew_tick=1"
fi
elif [ "${controller}" = true ] ; then
ilog "Adding ${TRAIT__CONTROLLER} function kernel options"
## Custom kernel options
add_kernel_option "intel_iommu=off usbcore.autosuspend=-1"
## Setup the loop module to support up to 15 partitions so that we
## can enable the customer to manually resize images if needed.
##
add_kernel_option "loop.max_part=15"
# Add kernel options to ensure NMI watchdog is enabled, if supported
add_kernel_option "nmi_watchdog=panic,1 softlockup_panic=1"
elif [ "${storage}" = true ] ; then
# We should never reach this code in miniboot:
report_failure_with_msg "Unexpected: 'storage' type not supported in miniboot"
fi
#########################################################################################
# From post_kernel_aio_and_worker.cfg
# From post_kernel_controller.cfg
# From post_kernel_storage.cfg
#########################################################################################
# Add kernel options to ensure an selinux is disabled for all node types
add_kernel_option "selinux=0 enforcing=0"
# Add kernel option to panic on a softdog timeout
add_kernel_option "softdog.soft_panic=1"
# Make sure that we are using cgroups v1
add_kernel_option "systemd.unified_cgroup_hierarchy=0"
# k8s updates
add_kernel_option "user_namespace.enable=1"
# Add kernel option to disable biosdevname if enabled
# As this may already be in GRUB_CMDLINE_LINUX, only add if it is not already present
grep -q '^GRUB_CMDLINE_LINUX=.*biosdevname=0' /etc/default/grub
if [ $? -ne 0 ]; then
add_kernel_option "biosdevname=0"
fi
if [ ! -z "${insthwsettle}" ]; then
if [[ ${insthwsettle} =~ ^[0-9]+$ ]]; then
add_kernel_option "hwsettle=${insthwsettle}"
fi
fi
########################################################################################
ilog "Adding these kernel params to disk boot: ${KERN_OPTS}"
if [ -n "${KERN_OPTS}" ] ; then
grep -q "^kernel_params=" /boot/efi/EFI/BOOT/boot.env
if [ ${?} -ne 0 ]; then
# Add line
sed -i "1 a kernel_params=${KERN_OPTS}" /boot/efi/EFI/BOOT/boot.env
else
# Update existing
sed -i "s/^kernel_params=.*/kernel_params=${KERN_OPTS}/" /boot/efi/EFI/BOOT/boot.env
fi
else
wlog "no kernel options added"
fi
ilog "Override LAT grub file"
GRUB_PATH_N_FILE="/boot/efi/EFI/BOOT/grub.cfg"
if [ ! -e ${GRUB_PATH_N_FILE}.lat ] ; then
mv ${GRUB_PATH_N_FILE} ${GRUB_PATH_N_FILE}.lat
cp /var/pxeboot/pxelinux.cfg.files/grub.cfg.stx ${GRUB_PATH_N_FILE}
fi
######################################################################
# From post_system_aio
######################################################################
TEMPLATE_FILE="/usr/share/worker-utils/config/worker_reserved.conf"
TARGET_FILE="/etc/platform/worker_reserved.conf"
if [ "${aio}" = true ] ; then
## Reserve more memory for base processes since the controller has higher
## memory requirements but cap it to better handle systems with large
## amounts of memory
TOTALMEM=$(grep MemTotal /proc/meminfo | awk '{print int($2/1024)}')
ilog "${SYSTEM_TYPE__AIO} MemTotal:${TOTALMEM}"
if [ -e /sys/devices/system/node/node0 ]; then
RESERVEDMEM=$(grep MemTotal /sys/devices/system/node/node0/meminfo | awk '{printf "%d\n", $4/1024}')
else
RESERVEDMEM=$(grep MemTotal /proc/meminfo | awk '{print int($2/1024/4)}')
fi
if [ ${RESERVEDMEM} -lt 6144 ]; then
RESERVEDMEM=6144
elif [ ${RESERVEDMEM} -gt 14500 ]; then
RESERVEDMEM=14500
elif [ ${RESERVEDMEM} -gt 8192 ]; then
RESERVEDMEM=8192
fi
# Normally we would set personality based files later
# But we need to copy worker_reserved.conf now since it needs to be modified for AIO
ilog "${SYSTEM_TYPE__AIO} Reserved Memory: ${RESERVEDMEM}"
if [ ! -e "${TEMPLATE_FILE}" ] ; then
report_failure_with_msg "Cannot configure worker cpu/memory ; missing ${TEMPLATE_FILE}"
fi
cp "${TEMPLATE_FILE}" "${TARGET_FILE}"
if [ ! -e "${TARGET_FILE}" ] ; then
report_failure_with_msg "Cannot configure worker cpu/memory ; missing ${TARGET_FILE}"
fi
sed -i -e "s#\(WORKER_BASE_RESERVED\)=.*#\1=(\"node0:${RESERVEDMEM}MB:1\" \"node1:2000MB:0\" \"node2:2000MB:0\" \"node3:2000MB:0\")#g" "${TARGET_FILE}"
if [ $? -ne 0 ] ; then
report_failure_with_msg "Cannot configure worker cpu/memory ; previous sed search and replace request failed"
fi
worker_reserved=$(grep WORKER_BASE_RESERVED "${TARGET_FILE}")
ilog "${SYSTEM_TYPE__AIO} '${worker_reserved}'"
# Update WORKER_CPU_LIST
N_CPUS=$(cat /proc/cpuinfo 2>/dev/null | awk '/^[pP]rocessor/ { n +=1 } END { print (n>0) ? n : 1}')
sed -i "s/^WORKER_CPU_LIST=.*/WORKER_CPU_LIST=\"0-$((N_CPUS-1))\"/" "${TARGET_FILE}"
worker_cpu_list=$(grep WORKER_CPU_LIST "${TARGET_FILE}")
ilog "${SYSTEM_TYPE__AIO} '${worker_cpu_list}'"
elif [ "${worker}" = true ] ; then
# Keep logic contained and copy worker_reserved.conf now since we need
# to do the copy for AIO above
ilog "Enable ${TARGET_FILE} for ${TRAIT__WORKER}"
if [ ! -e "${TEMPLATE_FILE}" ] ; then
report_failure_with_msg "Cannot configure worker cpu/memory ; missing ${TEMPLATE_FILE}"
fi
cp "${TEMPLATE_FILE}" "${TARGET_FILE}"
if [ ! -e "${TARGET_FILE}" ] ; then
report_failure_with_msg "Cannot configure worker cpu/memory ; missing ${TARGET_FILE}"
fi
fi
true
%end
###########################################################################
%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh
ilog "************************************"
ilog "*** Post - Interface Setup ***"
ilog "************************************"
ilog "Creating network definitions in /etc/network/interfaces.d"
parse_miniboot_network_params
mgmt_dev=${BOOTPARAM_IFNAME}
mgmt_vlan=${BOOTPARAM_VLAN}
mgmt_address_family=${BOOTPARAM_MGMT_ADDRESS_FAMILY}
ilog "mgmt_dev : ${mgmt_dev}"
ilog "mgmt_vlan: ${mgmt_vlan}"
if [ ! -e "${IMAGE_ROOTFS}/etc/network/interfaces" ] ; then
cat << EOF >> ${IMAGE_ROOTFS}/etc/network/interfaces
# This file describes the network interfaces available on the system
# and how to activate them. For more information , see interfaces(5)
source ${IMAGE_ROOTFS}/etc/network/interfaces.d/*
EOF
fi
if [ ! -d "${IMAGE_ROOTFS}/etc/network/interfaces.d" ] ; then
mkdir -p -m 0775 ${IMAGE_ROOTFS}/etc/network/interfaces.d
fi
ilog "Setup network scripts"
function create_network_interface_file()
{
local ifname=${1}
local address_family=${2}
local vlan=${3:-}
local ipversion=ipv4
local ip_cmd_flag="-4"
if [ "${address_family}" == "inet6" ]; then
local ipversion=ipv6
local ip_cmd_flag="-6"
fi
local ifname_vlan="vlan${vlan}"
local logstr="Creating ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-${ifname}, ${ipversion}"
[ -n "${vlan}" ] && logstr="${logstr}, vlan interface: ${ifname_vlan}"
[ -n "${BOOTPARAM_GW}" ] && logstr="${logstr}, gw: ${BOOTPARAM_GW}"
ilog "${logstr}"
local output
if [ -z "${vlan}" ]; then
# Persist the boot device to the platform configuration
# overwritten later if the management_interface is on a bonded interface.
update_platform_conf "management_interface=${ifname}"
# NO VLAN
output="auto ${ifname}\n"
output="${output}iface ${ifname} ${address_family} static\n"
output="${output} address ${BOOTPARAM_IP_ADDR}/$BOOTPARAM_PREFIX_LEN\n"
if [ -n "${BOOTPARAM_GW}" ]; then
output="${output} gateway $BOOTPARAM_GW\n"
fi
output="${output} mtu 1500\n"
output="${output} post-up echo 0 > /proc/sys/net/${ipversion}/conf/lo/autoconf\n"
output="${output} post-up echo 0 > /proc/sys/net/${ipversion}/conf/lo/accept_ra\n"
output="${output} post-up echo 0 > /proc/sys/net/${ipversion}/conf/lo/accept_redirects\n"
echo -e "${output}" > "${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-${ifname}"
else
# CONFIGURE FOR VLAN
# Persist the boot device to the platform configuration. This will get
# overwritten later if the management_interface is on a bonded interface.
update_platform_conf "management_interface=${ifname_vlan}"
# 1. Configure device interface:
output="auto ${ifname}\n"
output="${output}iface ${ifname} ${address_family} manual\n"
output="${output} post-up echo 0 > /proc/sys/net/${ipversion}/conf/${ifname}/autoconf\n"
output="${output} post-up echo 0 > /proc/sys/net/${ipversion}/conf/${ifname}/accept_ra\n"
output="${output} post-up echo 0 > /proc/sys/net/${ipversion}/conf/${ifname}/accept_redirects\n"
echo -e "${output}" > "${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-${ifname}"
# 2. Configure VLAN interface:
output="auto ${ifname_vlan}\n"
output="${output}iface ${ifname_vlan} ${address_family} static\n"
output="${output} vlan-raw-device ${ifname}\n"
output="${output} address ${BOOTPARAM_IP_ADDR}/${BOOTPARAM_PREFIX_LEN}\n"
if [ -n "${BOOTPARAM_GW}" ]; then
output="${output} gateway ${BOOTPARAM_GW}\n"
fi
output="${output} mtu 1500\n"
output="${output} post-up echo 0 > /proc/sys/net/${ipversion}/conf/${ifname_vlan}/autoconf\n"
output="${output} post-up echo 0 > /proc/sys/net/${ipversion}/conf/${ifname_vlan}/accept_ra\n"
output="${output} post-up echo 0 > /proc/sys/net/${ipversion}/conf/${ifname_vlan}/accept_redirects\n"
echo -e "${output}" > "${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-${ifname_vlan}"
fi
}
# Build networking scripts
# Loopback file
lo_file="${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-lo"
echo "auto lo" > "${lo_file}"
echo "iface lo ${mgmt_address_family} loopback" >> "${lo_file}"
if [ "${mgmt_dev}" != "lo" ]; then
create_network_interface_file "${mgmt_dev}" "${mgmt_address_family}" "${mgmt_vlan}"
fi
ilog "Contents of ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-lo:"
ilog "$(cat "${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-lo")"
ilog "Contents of ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-${mgmt_dev}:"
ilog "$(cat "${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-${mgmt_dev}")"
if [ -f "${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-vlan${mgmt_vlan}" ]; then
ilog "Contents of ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-vlan${mgmt_vlan}:"
ilog "$(cat "${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-vlan${mgmt_vlan}")"
fi
true
%end
##########################################################################
%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh
ilog "*********************************************************"
ilog "*** Post Nochroot - Kickstart Finalize Install UUID ***"
ilog "*********************************************************"
# Create a uuid specific to this installation
# install_uuid under /var needs to match what is written to /etc/platform/platform.conf
# When instflux=0 (/var not on a dedicated fluxdata partition)
# When instflux=1 (/var is part of the two different sysroot deployments).
# Therefore check if the file has been written and use that, otherwise generate it
feed="${IMAGE_ROOTFS}/var/www/pages/feed/rel-xxxPLATFORM_RELEASExxx"
[ ! -d "${feed}" ] && mkdir -p -m 0755 ${feed}
$(is_system_node_install)
if [ $? -ne 0 ] ; then
if [ -e "${LAT_DIR}/INSTALL_UUID" ]; then
INSTALL_UUID=$(< "${LAT_DIR}/INSTALL_UUID")
ilog "Using saved install uuid ${INSTALL_UUID}"
else
INSTALL_UUID=`uuidgen`
ilog "Generated install uuid ${INSTALL_UUID}"
echo "${INSTALL_UUID}" > ${LAT_DIR}/INSTALL_UUID
fi
ilog "... adding to ${feed}"
echo ${INSTALL_UUID} > ${feed}/install_uuid
ilog "... adding to ${PLATFORM_CONF}"
update_platform_conf "INSTALL_UUID=${INSTALL_UUID}"
else
# miniboot: this code should never be hit
report_failure_with_msg "Unexpected: incorrect node during UUID creation"
fi
true
%end
##########################################################################
%post --interpreter=/bin/bash
HOOK_LABEL="post"
. /tmp/lat/ks_functions.sh
ilog "****************************************"
ilog "*** Post - Log Filesystem Setup ***"
ilog "****************************************"
display_volume_info "final"
true
%end
##########################################################################
%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh
ilog "***********************************************************"
ilog "*** Post Nochroot - Restage OSTree repo ***"
ilog "*** - Save Install Scripts and Logs ***"
ilog "***********************************************************"
ilog "IMAGE_ROOTFS=${IMAGE_ROOTFS}"
get_variable "ostree_repo_fetched"
OSTREE_REPO_FETCHED=$?
# Fetch ostree
if [ "${controller}" = true ] ; then
sw_release="xxxPLATFORM_RELEASExxx" # updated by the build
feed="${IMAGE_ROOTFS}/var/www/pages/feed/rel-${sw_release}"
repo="${feed}/ostree_repo"
pxedir="${IMAGE_ROOTFS}/var/pxeboot"
if [ ${OSTREE_REPO_FETCHED} -eq 0 ] ; then
if is_usb_install -eq 0 ; then
# miniboot: always false
report_failure_with_msg "Unexpected miniboot code block: usb install"
else
ilog "Stage ostree_repo from previous /sysroot pull to ${repo}"
mv -f /sysroot/var/www/pages/feed/rel-${sw_release}/ostree_repo ${IMAGE_ROOTFS}/var/www/pages/feed/rel-${sw_release}/
fi
# This is used by patching.
# Set ostree remote to the local install feed
file_feed="file:///var/www/pages/feed/rel-${sw_release}/ostree_repo/"
feed_branch="starlingx"
ilog "Replacing ostree sysroot remote with: ${file_feed} ${feed_branch}"
ostree --repo=/sysroot/ostree/repo remote delete ${instname}
ostree --repo=/sysroot/ostree/repo remote add ${instname} ${file_feed} ${feed_branch}
# Set feed ostree remote "starlingx" to point to active controller's feed ostree repo
feed_remote_name="starlingx"
feed_remote_url="http://controller:8080/feed/rel-${sw_release}/ostree_repo/"
ilog "Replacing ostree feed remote with: ${feed_remote_url} ${feed_remote_name}"
ostree --repo=${repo} remote delete ${feed_remote_name}
ostree --repo=${repo} remote add ${feed_remote_name} ${feed_remote_url} ${feed_branch}
# This fetch is only needed once because the repo is stored in /var
set_variable "ostree_repo_fetched"
# copy efi.img to /var/pxeboot to enable duplex/multinode subclouds
cp -a /instboot/efi.img ${pxedir}
rc=$?
if [ rc -ne 0 ]; then
elog "Failed to copy efi.img to ${pxedir}"
fi
# Temporary WorkAround: The current UEFI pxeboot loader does not call the
# default provisioning grub menu in /var/pxeboot/pxelinux.cfg/grub.cfg.
#
# While the above issue is investigated, to support DX and system node
# install for UEFI servers this code moves the lat grub.cfg aside and
# creates a link to the default provisioning mac based grub menu.
if [ ! -e ${pxedir}/EFI/BOOT ]; then
mkdir -p ${pxedir}/EFI/BOOT
fi
pushd ${pxedir}/EFI/BOOT > /dev/null
if [ ! -L grub.cfg ] ; then
if [ -e grub.cfg ] ; then
mv grub.cfg grub.cfg.lat
fi
ln -s ../../pxelinux.cfg/grub.cfg
fi
popd > /dev/null
fi
fi
# Save the install scripts and kickstart logs
mount /dev/mapper/cgts--vg-log--lv "${IMAGE_ROOTFS}/${LOG_DIR}"
if [ ${?} -ne 0 ] ; then
elog "Failed to mount /dev/mapper/cgts--vg-log--lv"
else
if [ -e "${IMAGE_ROOTFS}/${LOG_DIR}" ]; then
cp -a /${LAT_DIR} ${IMAGE_ROOTFS}/${LOG_DIR}
cp /install ${IMAGE_ROOTFS}/${LOG_DIR}/lat
cp /lat-installer* ${IMAGE_ROOTFS}/${LOG_DIR}/lat
ilog "Saved installer data to ${IMAGE_ROOTFS}/${LOG_DIR}"
else
wlog "Could not save installer data"
fi
umount "${IMAGE_ROOTFS}/${LOG_DIR}"
fi
true
%end
##########################################################################
%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh
# This section needs to be removed when solutions are implemented
ilog "******************************************************************"
ilog "*** Post Nochroot - Workarounds for enabling integration ***"
ilog "******************************************************************"
# Workaround for enabling swacts on AIO-DX
# Workaround for enabling compute unlocks
# Launchpad: #1983580
[ -f ${IMAGE_ROOTFS}/var/lib/dpkg/triggers/Unincorp ] && rm ${IMAGE_ROOTFS}/var/lib/dpkg/triggers/Unincorp
true
%end
##########################################################################
%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh
# This needs to update all available ostree based rootfs
ilog "******************************************************"
ilog "*** Post Nochroot - Set up filesystem access ***"
ilog "******************************************************"
if [ "${controller}" = true ] ; then
mkdir -p ${IMAGE_ROOTFS}/var/rootdirs/opt/platform-backup
echo -e "LABEL=platform_backup\t/var/rootdirs/opt/platform-backup\text4\tdefaults\t1 2" >> ${IMAGE_ROOTFS}/etc/fstab
elif [ "${worker}" = true ] ; then
mkdir -p ${IMAGE_ROOTFS}/var/rootdirs/opt/platform
echo -e "controller-platform-nfs:/opt/platform\t/opt/platform\tnfs\ttimeo=30,udp,rsize=1024,wsize=1024,_netdev 0 0" >> ${IMAGE_ROOTFS}/etc/fstab
fi
mkdir -p ${IMAGE_ROOTFS}/var/rootdirs/scratch
echo -e "/dev/mapper/cgts--vg-scratch--lv\t/var/rootdirs/scratch\text4\tdefaults\t1 2" >> ${IMAGE_ROOTFS}/etc/fstab
mkdir -p ${IMAGE_ROOTFS}/var/log
echo -e "/dev/mapper/cgts--vg-log--lv\t/var/log\text4\tdefaults\t1 2" >> ${IMAGE_ROOTFS}/etc/fstab
# Report and update the lvm config for the sysroot. Remove preceeding tab and
# convert to spaces to align with puppet expectations
LV_PERSISTENT_ROOTDISK=$(get_persistent_disk ${LV_ROOTDISK})
log_lvm_conf "SysRoot Initial" ${IMAGE_ROOTFS}/etc/lvm/lvm.conf
ilog ""
ilog "Update the LVM global filter to enable the initial physical volume only: ${LV_PERSISTENT_ROOTDISK}"
ilog ""
sed -i "s@^\(\s*\)# global_filter = \[.*@ global_filter = [ \"a|${LV_PERSISTENT_ROOTDISK}|\", \"r|.*|\" ]@" ${IMAGE_ROOTFS}/etc/lvm/lvm.conf
log_lvm_conf "SysRoot Updated" ${IMAGE_ROOTFS}/etc/lvm/lvm.conf
eject_device=$(eject -d | awk -F\` '{print $2}' | awk -F\' '{print $1}')
ilog "eject device=$eject_device"
eject $eject_device
rc=$?
[ $rc -ne 0 ] && elog "eject failed, rc=$rc"
# Create first_boot flag
touch ${IMAGE_ROOTFS}/etc/platform/.first_boot
true
%end
##########################################################################
%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh
# This needs to update all available ostree based rootfs
ilog "****************************************************************"
ilog "*** Post Nochroot - Set up package links per node type ***"
ilog "****************************************************************"
ilog "IMAGE_ROOTFS=${IMAGE_ROOTFS}"
if [ ! -d "${IMAGE_ROOTFS}/etc/goenabled.d" ]; then
wlog "Directory ${IMAGE_ROOTFS}/etc/goenabled.d is missing, creating it now"
mkdir ${IMAGE_ROOTFS}/etc/goenabled.d
fi
if [ ! "${controller}" = true -a "${worker}" = true ] ; then
ilog "Setting up ${TRAIT__WORKER} package file links"
ln -s /etc/goenabled.d/config_goenabled_check.sh.worker ${IMAGE_ROOTFS}/etc/goenabled.d/config_goenabled_check.sh
ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/controllerconfig.service
ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/storageconfig.service
elif [ "${storage}" = true ] ; then
ilog "Setting up ${TRAIT__STORAGE} package file links"
ln -s /etc/goenabled.d/config_goenabled_check.sh.storage ${IMAGE_ROOTFS}/etc/goenabled.d/config_goenabled_check.sh
ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/controllerconfig.service
ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/workerconfig.service
elif [ "${controller}" = true ] ; then
ilog "Setting up ${TRAIT__CONTROLLER} package file links"
ln -s /etc/goenabled.d/config_goenabled_check.sh.controller ${IMAGE_ROOTFS}/etc/goenabled.d/config_goenabled_check.sh
ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/workerconfig.service
ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/storageconfig.service
fi
chmod 700 ${IMAGE_ROOTFS}/etc/goenabled.d/config_goenabled_check.sh
if [[ ! -d "${IMAGE_ROOTFS}/etc/pmon.d" ]]; then
wlog "Directory ${IMAGE_ROOTFS}/etc/pmon.d/ is missing, creating it now"
mkdir ${IMAGE_ROOTFS}/etc/pmon.d
fi
if [ "${controller}" = true ] ; then
ilog "Setting up pmon files for ${TRAIT__CONTROLLER} and/or ${TRAIT__CONTROLLER} side of ${SYSTEM_TYPE__AIO}"
ln -s /usr/share/starlingx/pmon.d/acpid.conf ${IMAGE_ROOTFS}/etc/pmon.d/acpid.conf
ln -s /usr/share/starlingx/pmon.d/containerd.conf ${IMAGE_ROOTFS}/etc/pmon.d/containerd.conf
ln -s /usr/share/starlingx/pmon.d/docker.conf ${IMAGE_ROOTFS}/etc/pmon.d/docker.conf
ln -s /usr/share/starlingx/pmon.d/fm-api.conf ${IMAGE_ROOTFS}/etc/pmon.d/fm-api.conf
ln -s /usr/share/starlingx/pmon.d/fsmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/fsmon.conf
ln -s /usr/share/starlingx/pmon.d/hbsAgent.conf ${IMAGE_ROOTFS}/etc/pmon.d/hbsAgent.conf
ln -s /usr/share/starlingx/pmon.d/hbsClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/hbsClient.conf
ln -s /usr/share/starlingx/pmon.d/lmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/lmon.conf
ln -s /usr/share/starlingx/pmon.d/logmgmt ${IMAGE_ROOTFS}/etc/pmon.d/logmgmt
ln -s /usr/share/starlingx/pmon.d/mtcClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcClient.conf
ln -s /usr/share/starlingx/pmon.d/mtcalarm.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcalarm.conf
ln -s /usr/share/starlingx/pmon.d/mtclogd.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtclogd.conf
ln -s /usr/share/starlingx/pmon.d/sm-api.conf ${IMAGE_ROOTFS}/etc/pmon.d/sm-api.conf
ln -s /usr/share/starlingx/pmon.d/sm-eru.conf ${IMAGE_ROOTFS}/etc/pmon.d/sm-eru.conf
ln -s /usr/share/starlingx/pmon.d/sm.conf ${IMAGE_ROOTFS}/etc/pmon.d/sm.conf
ln -s /usr/share/starlingx/pmon.d/sshd.conf ${IMAGE_ROOTFS}/etc/pmon.d/sshd.conf
ln -s /usr/share/starlingx/pmon.d/sssd.conf ${IMAGE_ROOTFS}/etc/pmon.d/sssd.conf
ln -s /usr/share/starlingx/pmon.d/sw-patch-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sw-patch-agent.conf
ln -s /usr/share/starlingx/pmon.d/sw-patch-controller-daemon.conf ${IMAGE_ROOTFS}/etc/pmon.d/sw-patch-controller-daemon.conf
ln -s /usr/share/starlingx/pmon.d/sysinv-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sysinv-agent.conf
ln -s /usr/share/starlingx/pmon.d/syslog-ng.conf ${IMAGE_ROOTFS}/etc/pmon.d/syslog-ng.conf
fi
if [ "${worker}" = true ] ; then
ilog "Setting up pmon files for ${TRAIT__WORKER} and/or ${TRAIT__WORKER} side of ${SYSTEM_TYPE__AIO}"
ln -s /usr/share/starlingx/pmon.d/acpid.conf ${IMAGE_ROOTFS}/etc/pmon.d/acpid.conf
ln -s /usr/share/starlingx/pmon.d/containerd.conf ${IMAGE_ROOTFS}/etc/pmon.d/containerd.conf
ln -s /usr/share/starlingx/pmon.d/docker.conf ${IMAGE_ROOTFS}/etc/pmon.d/docker.conf
ln -s /usr/share/starlingx/pmon.d/fsmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/fsmon.conf
ln -s /usr/share/starlingx/pmon.d/guestServer.conf ${IMAGE_ROOTFS}/etc/pmon.d/guestServer.conf
ln -s /usr/share/starlingx/pmon.d/hbsClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/hbsClient.conf
ln -s /usr/share/starlingx/pmon.d/isolcpu_plugin.conf ${IMAGE_ROOTFS}/etc/pmon.d/isolcpu_plugin.conf
ln -s /usr/share/starlingx/pmon.d/lmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/lmon.conf
ln -s /usr/share/starlingx/pmon.d/logmgmt ${IMAGE_ROOTFS}/etc/pmon.d/logmgmt
ln -s /usr/share/starlingx/pmon.d/mtcClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcClient.conf
ln -s /usr/share/starlingx/pmon.d/mtcalarm.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcalarm.conf
ln -s /usr/share/starlingx/pmon.d/mtclogd.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtclogd.conf
ln -s /usr/share/starlingx/pmon.d/sm-eru.conf ${IMAGE_ROOTFS}/etc/pmon.d/sm-eru.conf
ln -s /usr/share/starlingx/pmon.d/sshd.conf ${IMAGE_ROOTFS}/etc/pmon.d/sshd.conf
ln -s /usr/share/starlingx/pmon.d/sssd.conf ${IMAGE_ROOTFS}/etc/pmon.d/sssd.conf
ln -s /usr/share/starlingx/pmon.d/sw-patch-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sw-patch-agent.conf
ln -s /usr/share/starlingx/pmon.d/sysinv-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sysinv-agent.conf
ln -s /usr/share/starlingx/pmon.d/syslog-ng.conf ${IMAGE_ROOTFS}/etc/pmon.d/syslog-ng.conf
fi
if [ "${storage}" = true ] ; then
ilog "Setting up pmon files for ${TRAIT__STORAGE} and/or ${TRAIT__STORAGE} side of ${SYSTEM_TYPE__AIO}"
ln -s /usr/share/starlingx/pmon.d/acpid.conf ${IMAGE_ROOTFS}/etc/pmon.d/acpid.conf
ln -s /usr/share/starlingx/pmon.d/containerd.conf ${IMAGE_ROOTFS}/etc/pmon.d/containerd.conf
ln -s /usr/share/starlingx/pmon.d/docker.conf ${IMAGE_ROOTFS}/etc/pmon.d/docker.conf
ln -s /usr/share/starlingx/pmon.d/fsmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/fsmon.conf
ln -s /usr/share/starlingx/pmon.d/hbsClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/hbsClient.conf
ln -s /usr/share/starlingx/pmon.d/lmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/lmon.conf
ln -s /usr/share/starlingx/pmon.d/logmgmt ${IMAGE_ROOTFS}/etc/pmon.d/logmgmt
ln -s /usr/share/starlingx/pmon.d/mtcClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcClient.conf
ln -s /usr/share/starlingx/pmon.d/mtcalarm.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcalarm.conf
ln -s /usr/share/starlingx/pmon.d/mtclogd.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtclogd.conf
ln -s /usr/share/starlingx/pmon.d/sm-eru.conf ${IMAGE_ROOTFS}/etc/pmon.d/sm-eru.conf
ln -s /usr/share/starlingx/pmon.d/sshd.conf ${IMAGE_ROOTFS}/etc/pmon.d/sshd.conf
ln -s /usr/share/starlingx/pmon.d/sw-patch-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sw-patch-agent.conf
ln -s /usr/share/starlingx/pmon.d/sysinv-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sysinv-agent.conf
ln -s /usr/share/starlingx/pmon.d/syslog-ng.conf ${IMAGE_ROOTFS}/etc/pmon.d/syslog-ng.conf
fi
true
%end
# vim: filetype=sh
View Git Blame Copy Permalink