metal/bsp-files/kickstarts/pre_disk_controller.cfg

## NOTE: updates to partition sizes need to be also reflected in
## _controller_filesystem_limits() in sysinv/api/controllers/v1/istorconfig.py

ROOTFS_SIZE=20000
LOG_VOL_SIZE=8000
SCRATCH_VOL_SIZE=16000
PLATFORM_BACKUP_SIZE=10000
BOOT_SIZE=500
EFI_SIZE=300

ROOTFS_OPTIONS="defaults"
profile_mode=`cat /proc/cmdline |xargs -n1 echo |grep security_profile= | grep extended`
if [ -n "$profile_mode" ]; then
   # Enable iversion labelling for rootfs when IMA is enabled
   ROOTFS_OPTIONS="${ROOTFS_OPTIONS},iversion"
fi

if [ -d /sys/firmware/efi ] ; then
    BACKUP_PART=${ROOTFS_PART_PREFIX}1
    BACKUP_PART_NO=1
    START_POINT=1
    END_POINT=$(($START_POINT + $PLATFORM_BACKUP_SIZE))
    BACKUP_END_POINT=$END_POINT
    if [ $BACKUP_CREATED -eq 0 ] ; then
        wlog "Creating platform backup partition of ${PLATFORM_BACKUP_SIZE}MiB from ${START_POINT}MiB to ${END_POINT}MiB."
        exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary ext4 ${START_POINT}MiB ${END_POINT}MiB"
        [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
    fi

    START_POINT=$END_POINT
    END_POINT=$(($START_POINT + $EFI_SIZE))
    wlog "Creating EFI partition of ${EFI_SIZE}MiB from ${START_POINT}MiB to ${END_POINT}MiB."
    exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary fat32 ${START_POINT}MiB ${END_POINT}MiB"
    [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"

    cat<<EOF>>/tmp/part-include
part /boot/efi --fstype=efi --onpart=${ROOTFS_PART_PREFIX}2
EOF
else
    BACKUP_PART=${ROOTFS_PART_PREFIX}2
    BACKUP_PART_NO=2
    wlog "Creating 1MB BIOS GRUB partition from 1MiB to 2MiB."
    exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary 1MiB 2MiB"
    [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"

    START_POINT=2
    END_POINT=$(($START_POINT + $PLATFORM_BACKUP_SIZE))
    BACKUP_END_POINT=$END_POINT
    if [ $BACKUP_CREATED -eq 0 ] ; then
        wlog "Creating platform backup partition of ${PLATFORM_BACKUP_SIZE}MiB from ${START_POINT}MiB to ${END_POINT}MiB."
        exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary ext4 ${START_POINT}MiB ${END_POINT}MiB"
        [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"
    fi
    cat<<EOF>>/tmp/part-include
part biosboot --asprimary --fstype=biosboot --onpart=${ROOTFS_PART_PREFIX}1
EOF
fi

START_POINT=$END_POINT
END_POINT=$(($START_POINT + $BOOT_SIZE))
wlog "Creating boot partition of ${BOOT_SIZE}MiB from ${START_POINT}MiB to ${END_POINT}MiB."
exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary ext4 ${START_POINT}MiB ${END_POINT}MiB"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"

START_POINT=$END_POINT
END_POINT=$(($START_POINT + $ROOTFS_SIZE))
wlog "Creating rootfs partition of ${ROOTFS_SIZE}MiB from ${START_POINT}MiB to ${END_POINT}MiB."
exec_retry 5 0.5 "parted -s $rootfs_device mkpart primary ext4 ${START_POINT}MiB ${END_POINT}MiB"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"

START_POINT=$END_POINT
wlog "Creating cgcs-vg partition of ${CGCS_PV_SIZE}MiB from ${START_POINT}MiB to 100%."
exec_retry 5 0.5 "parted -s $rootfs_device mkpart extended ${START_POINT}MiB 100%"
[ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Partition creation failed!"

if [ $BACKUP_CREATED -ne 0 ] ; then
    BACKUP_CURRENT_SIZE=$(parted -s $BACKUP_PART unit MiB print | grep $BACKUP_PART | awk '{print $3}' | sed 's/[^C0-9]*//g')
    if [ $BACKUP_CURRENT_SIZE -lt $PLATFORM_BACKUP_SIZE ] ; then
        wlog "Backup partition size is ${BACKUP_CURRENT_SIZE}MiB, resizing to ${PLATFORM_BACKUP_SIZE}MiB."
        # parted will throw an error about overlapping with the next partition if we don't do this
        BACKUP_END_POINT=$(($BACKUP_END_POINT - 1)).9
        exec_retry 5 0.5 "parted -s $rootfs_device resizepart $BACKUP_PART_NO ${BACKUP_END_POINT}MiB"
        [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: resize of platform backup partition failed!"
        exec_retry 2 0.1 "e2fsck -p -f $BACKUP_PART"
        [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: e2fsck failed on platform backup partition!"
        exec_retry 2 1 "resize2fs $BACKUP_PART"
        [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Filed to resize ext4 fs of platform backup partition!"
    elif [ $BACKUP_CURRENT_SIZE -gt $PLATFORM_BACKUP_SIZE ] ; then
        report_pre_failure_with_msg "ERROR: Backup partition is ${BACKUP_CURRENT_SIZE}MiB expected size is less or equal to ${PLATFORM_BACKUP_SIZE}MiB."
    else
        wlog "Backup partition size is correct: ${PLATFORM_BACKUP_SIZE}MiB."
    fi
    cat<<EOF>>/tmp/part-include
part /opt/platform-backup --fstype=ext4 --asprimary --noformat --onpart=$BACKUP_PART --fsoptions="$ROOTFS_OPTIONS"
EOF
else
    cat<<EOF>/tmp/backup-guid-change.sh
echo "\$(date '+%Y-%m-%d %H:%M:%S.%3N') - Updating backup partition GUID."
flock $rootfs_device sgdisk --change-name=${BACKUP_PART_NO}:"${BACKUP_PART_LABEL}" --typecode=${BACKUP_PART_NO}:"${BACKUP_PART_GUID}" $rootfs_device || exit 1
EOF

    cat<<EOF>>/tmp/part-include
part /opt/platform-backup --fstype=ext4 --asprimary --onpart=$BACKUP_PART --fsoptions="$ROOTFS_OPTIONS"
EOF
fi

cat<<EOF>>/tmp/part-include
part /boot --fstype=ext4 --asprimary --onpart=${ROOTFS_PART_PREFIX}3 --fsoptions="$ROOTFS_OPTIONS"
part pv.253004 --onpart=${ROOTFS_PART_PREFIX}5
volgroup cgts-vg --pesize=32768 pv.253004
logvol /var/log --fstype=ext4 --vgname=cgts-vg --size=$LOG_VOL_SIZE --name=log-lv
logvol /scratch --fstype=ext4 --vgname=cgts-vg --size=$SCRATCH_VOL_SIZE --name=scratch-lv
part / --fstype=ext4 --asprimary --onpart=${ROOTFS_PART_PREFIX}4 --fsoptions="$ROOTFS_OPTIONS"
EOF