compass-adapters/cobbler/snippets/preseed_pre_partition_disks
Xicheng Chang ce7e2103b2 Syncing opnfv compass-adapters With openstack/compass-adapters
Change-Id: Ibbadf313fe0759500ae9b0528aba8ceca259ec9a
2016-05-18 10:03:42 -05:00

674 lines
23 KiB
Plaintext

#set hostname=$getVar('hostname',None)
#set partition = $getVar('partition', None)
#set partition_size = $getVar('partition_size', None)
#set partition_maxsize = $getVar('partition_maxsize', None)
#set disk_reserve_size = $getVar('disk_reserve_size', None)
#set disk_max_size = $getVar('disk_max_size', None)
#set default_disk_reserve_size = $getVar('default_disk_reserve_size', '0')
#set default_disk_max_size = $getVar('default_disk_max_size', '0')
#if $hostname == None
#set $vgname = "VolGroup00"
#else
#set $vgname = $hostname.split('.')[0]
#end if
echo "partman early script" >> /tmp/preseed.log
if [ -e /dev/disk/by-path ]; then
set \$(ls -s -l /dev/disk/by-path | tr -s '\t' ' ' | cut -d' ' -f11,13)
disk_mapping_nums=\$((\$#/2))
disk_mapping_offset=0
echo "disk_mapping_nums: \$disk_mapping_nums" >> /tmp/preseed.log
echo "disk_mapping: \$@" >> /tmp/preseed.log
disk_mapping=""
disk_path_mapping=""
while [ \$disk_mapping_offset -lt \$disk_mapping_nums ]; do
found_disk_type=0
#if $getVar('disk_type_only','') != ""
if expr match "\$1" ".*-${disk_type_only}-.*"; then
found_disk_type=1
fi
#else
found_disk_type=1
#end if
path_name=\$(basename \$1)
disk_path_name=\$(echo \${path_name} | tr '-' '_' | tr ':' '_' | tr '.' '_')
disk_name=\$(basename \$2)
disk_mapping_offset=\$((\${disk_mapping_offset}+1))
shift 2
if [ \$found_disk_type -gt 0 ]; then
if [ -z "\${disk_mapping}" ]; then
disk_mapping="\${disk_name}"
else
disk_mapping="\${disk_mapping} \${disk_name}"
fi
if [ -z "\${disk_path_mapping}" ]; then
disk_path_mapping="\${disk_path_name}"
else
disk_path_mapping="\${disk_path_mapping} \${disk_path_name}"
fi
eval "disk_\${disk_name}=/dev/disk/by-path/\${path_name}"
eval "disk_\${disk_path_name}=/dev/disk/by-path/\${path_name}"
eval "disk_path_\${disk_path_name}=/dev/\${disk_name}"
eval "disk_path_\${disk_name}=/dev/\${disk_name}"
else
eval "ignore_disk_\${disk_name}=/dev/disk/by-path/\${path_name}"
eval "ignore_disk_\${disk_path_name}=/dev/disk/by-path/\${path_name}"
eval "ignore_disk_path_\${disk_path_name}=/dev/\${disk_name}"
eval "ignore_disk_path_\${disk_name}=/dev/\${disk_name}"
fi
done
for key in \${disk_mapping}; do
eval "disk_path=\\${disk_\$key}"
echo "disk_mapping \$key => \${disk_path}" >> /tmp/preseed.log
done
for key in \${disk_path_mapping}; do
eval "disk=\\${disk_path_\$key}"
echo "disk path mapping \$key => \${disk}" >> /tmp/preseed.log
done
else
echo "/dev/disk/by-path does not exist" >> /tmp/preseed.log
fi
partition_disks=""
disks=""
for disk in \$(list-devices disk); do
disk_name=\$(basename \$disk)
eval "disk_path=\\${disk_\${disk_name}}"
if [ -z "\${disk_path}" ]; then
eval "ignore_disk_path=\\${ignore_disk_\${disk_name}}"
if [ ! -z "\${ignore_disk_path}" ]; then
echo "ignore disk \${disk_name} since it is not in disk_mapping" >> /tmp/preseed.log
continue
else
echo "did not found disk path for \$disk but it is not ignored" >> /tmp/preseed.log
eval "disk_\${disk_name}=/dev/\${disk_name}"
eval "disk_path_\${disk_name}=/dev/\${disk_name}"
fi
fi
found_disk=0
#if $getVar('partitions_only','') != ""
#for $partition_only in $partitions_only.split(',')
#if not $partition_only
#continue
#end if
if expr match "\${disk_name}" "$partition_only"; then
found_disk=1
else
echo "disk \${disk_name} does not match $partition_only" >> /tmp/preseed.log
fi
#end for
#else
found_disk=1
#end if
#if $getVar('partition_by_path', '0') != "0"
eval "disk=\\${disk_\${disk_name}}"
#end if
if [ \$found_disk -gt 0 ]; then
echo "add disk \${disk} in partitioning list" >> /tmp/preseed.log
if [ -z "\${partition_disks}" ]; then
partition_disks="\${disk}"
else
partition_disks="\${partition_disks} \${disk}"
fi
fi
if [ -z "\$disks" ]; then
disks="\${disk}"
else
disks="\${disks} \${disk}"
fi
done
echo "partition disks: \${partition_disks}" >> /tmp/preseed.log
echo "disks \${disks}" >> /tmp/preseed.log
#if $getVar('sort_disks', '0') != "0"
sorted_disks=\$(printf '%s\n' \${partition_disks} | sort)
#else
sorted_disks=\${partition_disks}
#end if
echo "sorted disks \${sorted_disks}" >> /tmp/preseed.log
#if $getVar('start_from_disk', '') != ""
#set $start_from_disk = $int($start_from_disk)
#if $start_from_disk > 0
#set $disk_start_offset = $start_from_disk - 1
#else
#set $disk_start_offset = 0
#end if
set \${sorted_disks}
shift $disk_start_offset
sorted_disks=\$@
echo "sorted disks begin from the $start_from_disk: \${sorted_disks}" >> /tmp/preseed.log
#end if
#if $getVar('disk_num', '') != ""
set \${sorted_disks}
sorted_disks=\$(printf '%s\n' \$@ | head -n${disk_num})
echo "sorted disks for $disk_num disks: \${sorted_disks}" >> /tmp/preseed.log
#end if
first_disk=""
for disk in \${sorted_disks}; do
if [ -z "\${first_disk}" ]; then
first_disk=\${disk}
break
fi
done
echo "first disk \${first_disk}" >> /tmp/preseed.log
#if $getVar('keep_old_partitions', '0') != "0"
for disk in \${sorted_disks}; do
dd if=/dev/zero of=\${disk} bs=512 count=1
done
remove_disks=\${sorted_disks}
#else
for disk in \$disks; do
dd if=/dev/zero of=\$disk bs=512 count=1
done
remove_disks=\${disks}
#end if
echo "remove disks \${remove_disks}" >> /tmp/preseed.log
disk_partitions=\$(pvs --noheadings --separator :| cut -d: -f1)
remove_partitions=""
remove_vgs=""
for disk_partition in \${disk_partitions}; do
vg=\$(pvs --noheadings --separator : \${disk_partition} | cut -d: -f2)
remove_vg=""
remove_partition=""
for remove_disk in \${remove_disks}; do
#if $getVar('partition_by_path', '0') != "0"
path_name=\$(basename \${remove_disk})
disk_path_name=\$(echo \${path_name} | tr '-' '_' | tr ':' '_' | tr '.' '_')
remove_disk_path=\${remove_disk}
eval "remove_disk=\\${disk_path_\${disk_path_name}}"
#else
disk_name=\$(basename \${remove_disk})
eval "remove_disk_path=\\${disk_\${disk_name}}"
#end if
if [ -z "\${remove_disk}" ]; then
continue
fi
if [ -z "\${remove_disk_path}" ]; then
continue
fi
if expr match "\${disk_partition}" "\${remove_disk_path}.*"; then
remove_vg="\$vg"
remove_partition="\${disk_partition}"
else
echo "partition \${disk_partition} does not match \${remove_disk_path}.*" >> /tmp/preseed.log
fi
if expr match "\${disk_partition}" "\${remove_disk}.*"; then
remove_vg="\$vg"
remove_partition="\${disk_partition}"
else
echo "partition \${disk_partition} does not match \${remove_disk}.*" >> /tmp/preseed.log
fi
if [[ "\$vg" == "$vgname" ]]; then
remove_vg="\$vg"
remove_partition="\${disk_partition}"
fi
done
if [ ! -z "\${remove_vg}" ]; then
if [ -z "\${remove_vgs}" ]; then
remove_vgs="\${remove_vg}"
else
vg_removed=0
for vg in \${remove_vgs}; do
if [[ "\$vg" == "\${remove_vg}" ]]; then
vg_removed=1
fi
done
if [ \${vg_removed} -eq 0 ]; then
remove_vgs="\${remove_vgs} \${remove_vg}"
fi
fi
fi
if [ ! -z "\${remove_partition}" ]; then
if [ -z "\${remove_partitions}" ]; then
remove_partitions="\${remove_partition}"
else
pv_removed=0
for pv in ${remove_partitions}; do
if [[ "\$pv" == "\${remove_partition}" ]]; then
pv_removed=1
fi
done
if [ \${pv_removed} -eq 0 ]; then
remove_partitions="\${remove_partitions} \${remove_partition}"
fi
fi
fi
done
echo "remove vgs \${remove_vgs}" >> /tmp/preseed.log
for remove_vg in \${remove_vgs}; do
vgremove -f \${remove_vg}
done
echo "remove partitions \${remove_partitions} from \${remove_vgs}" >> /tmp/preseed.log
for remove_partition in \${remove_partitions}; do
pvremove -ff -y \${remove_partition}
done
echo "remove disks \${remove_disks}" >> /tmp/preseed.log
partition_disks=""
#if $getVar('keep_old_partitions', '0') != "0"
for disk in \${sorted_disks}; do
#else
for disk in \${disks}; do
#end if
if [ -z "\${partition_disks}" ]; then
partition_disks="\${disk}"
else
partition_disks="\${partition_disks} \${disk}"
fi
done
partition_disks_str=\$(echo \${partition_disks} | tr ' ' ',')
echo "d-i partman-auto/select_disks multiselect \${partition_disks_str}" >> /tmp/part-include
echo "d-i partman-auto/disk string \${partition_disks}" >> /tmp/part-include
echo "disks \${partition_disks}" >> /tmp/preseed.log
default_partition=$getVar('default_partition', '/')
partition_fstype=$getVar('partition_fstype', 'ext3')
echo "default partition \${default_partition}" >> /tmp/preseed.log
echo "partition fstype \${partition_fstype}" >> /tmp/preseed.log
#if $disk_reserve_size != None
#set disk_sizes = [disk_size.strip() for disk_size in $disk_reserve_size.split(';') if disk_size.strip()]
#for disk_and_size in $disk_sizes
#set disk_name, size = $disk_and_size.split(' ', 1)
#set disk_name = $disk_name.strip()
#if $size.endswith('K')
#set disk_size = $int($size[:-1]) / 1000
#elif $size.endswith('M')
#set disk_size = $int($size[:-1])
#elif $size.endswith('G')
#set disk_size = $int($size[:-1]) * 1000
#elif $size.endswith('T')
#set disk_size = $int($size[:-1]) * 1000000
#else
#set disk_size = $int($size)
#end if
reserve_disk_size_${disk_name}=${disk_size}
#end for
#end if
#if $default_disk_reserve_size.endswith('K')
#set disk_size = $int($default_disk_reserve_size[:-1]) / 1000
#elif $default_disk_reserve_size.endswith('M')
#set disk_size = $int($default_disk_reserve_size[:-1])
#elif $default_disk_reserve_size.endswith('G')
#set disk_size = $int($default_disk_reserve_size[:-1]) * 1000
#elif $default_disk_reserve_size.endswith('T')
#set disk_size = $int($default_disk_reserve_size[:-1]) * 1000000
#else
#set disk_size = $int($default_disk_reserve_size)
#end if
default_reserve_disk_size=${disk_size}
#if $disk_max_size != None
#set disk_sizes = [disk_size.strip() for disk_size in $disk_max_size.split(';') if disk_size.strip()]
#for disk_and_size in $disk_sizes
#set disk_name, size = $disk_and_size.split(' ', 1)
#set disk_name = $disk_name.strip()
#if $size.endswith('K')
#set disk_size = $int($size[:-1]) / 1000
#elif $size.endswith('M')
#set disk_size = $int($size[:-1])
#elif $size.endswith('G')
#set disk_size = $int($size[:-1]) * 1000
#elif $size.endswith('T')
#set disk_size = $int($size[:-1]) * 1000000
#else
#set disk_size = $int($size)
#end if
max_disk_size_${disk_name}=${disk_size}
#end for
#end if
#if $default_disk_max_size.endswith('K')
#set disk_size = $int($default_disk_max_size[:-1]) / 1000
#elif $default_disk_max_size.endswith('M')
#set disk_size = $int($default_disk_max_size[:-1])
#elif $default_disk_max_size.endswith('G')
#set disk_size = $int($default_disk_max_size[:-1]) * 1000
#elif $default_disk_max_size.endswith('T')
#set disk_size = $int($default_disk_max_size[:-1]) * 1000000
#else
#set disk_size = $int($default_disk_max_size)
#end if
default_max_disk_size=${disk_size}
partition_names=""
default_partition_name=""
#if $partition != None
#set vol_sizes = [part.strip() for part in $partition.split(';') if part.strip()]
#for vol_and_size in vol_sizes
#set vol, vol_size = $vol_and_size.split(' ', 1)
#set vol = $vol.strip()
#if $vol == '/'
#set volname = 'root'
#elif $vol == 'swap'
#set volname = 'swap'
#elif $vol.startswith('/')
#set volname = $vol[1:].replace('/', '_')
#else
# $vol is not starts with /
#continue
#end if
if [ -z "\${partition_names}" ]; then
partition_names="$volname"
else
partition_names="\$partition_names $volname"
fi
if [[ "$vol" == "\$default_partition" ]]; then
default_partition_name=$volname
fi
partition_point_$volname=$vol
#set vol_size = $vol_size.strip()
#if $vol_size.endswith('%')
#set vol_percent = $vol_size[:-1]
partition_percentage_$volname=$vol_percent
#else
#if $vol_size.endswith('K')
#set vol_min_size = $int($vol_size[:-1]) / 1000
#elif $vol_size.endswith('M')
#set vol_min_size = $int($vol_size[:-1])
#elif $vol_size.endswith('G')
#set vol_min_size = $int($vol_size[:-1]) * 1000
#elif $vol_size.endswith('T')
#set vol_min_size = $int($vol_size[:-1]) * 1000000
#else
#set vol_min_size = $int($vol_size)
#end if
partition_size_$volname=$vol_min_size
#end if
#end for
#end if
#if $partition_size != None
#set vol_sizes = [part.strip() for part in $partition_size.split(';') if part.strip()]
#for vol_and_size in $vol_sizes
#set vol, vol_size = $vol_and_size.split(' ', 1)
#set vol = $vol.strip()
#if $vol == '/'
#set volname = 'root'
#elif $vol == 'swap'
#set volname = 'swap'
#elif $vol.startswith('/')
#set volname = $vol[1:].replace('/', '_')
#else
# $vol is not starts with /
#continue
#end if
#if $vol_size.endswith('K')
#set vol_min_size = $int($vol_size[:-1]) / 1000
#elif $vol_size.endswith('M')
#set vol_min_size = $int($vol_size[:-1])
#elif $vol_size.endswith('G')
#set vol_min_size = $int($vol_size[:-1]) * 1000
#elif $vol_size.endswith('T')
#set vol_min_size = $int($vol_size[:-1]) * 1000000
#else
#set vol_min_size = $int($vol_size)
#end if
partitions_size_$volname=${vol_min_size}
#end for
#end if
#if $partition_maxsize != None
#set vol_sizes = [part.strip() for part in $partition_maxsize.split(';') if part.strip()]
#for vol_and_size in $vol_sizes
#set vol, vol_size = $vol_and_size.split(' ', 1)
#set vol = $vol.strip()
#if $vol == '/'
#set volname = 'root'
#elif $vol == 'swap'
#set volname = 'swap'
#elif $vol.startswith('/')
#set volname = $vol[1:].replace('/', '_')
#else
# $vol is not starts with /
#continue
#end if
#if $vol_size.endswith('K')
#set vol_max_size = $int($vol_size[:-1]) / 1000
#elif $vol_size.endswith('M')
#set vol_max_size = $int($vol_size[:-1])
#elif $vol_size.endswith('G')
#set vol_max_size = $int($vol_size[:-1]) * 1000
#elif $vol_size.endswith('T')
#set vol_max_size = $int($vol_size[:-1]) * 1000000
#else
#set vol_max_size = $int($vol_size)
#end if
partition_maxsize_$volname=${vol_max_size}
#end for
#end if
echo "finish partition mapping" >> /tmp/preseed.log
for key in \${partition_names}; do
eval "mountpoint=\\${partition_point_\$key}"
echo "partition names \$key => \${mountpoint}" >> /tmp/preseed.log
eval "partition_percentage=\\${partition_percentage_\$key}"
echo "partition percentage \$key => \${partition_percentage}" >> /tmp/preseed.log
eval "partition_size=\\${partition_size_\$key}"
echo "partition size \$key => \${partition_size}" >> /tmp/preseed.log
eval "partition_max_size=\\${partition_max_size_\$key}"
echo "partition max size \$key => \${partition_max_size}" >> /tmp/preseed.log
done
if [ -z "\${default_partition_name}" ]; then
default_partition_name=root
fi
default_partition_percentage=100
for key in \${partition_names}; do
if [[ "\$key" == "\${default_partition_name}" ]]; then
continue
fi
if [[ "\$key" == "swap" ]]; then
continue
fi
eval "partition_percentage=\\${partition_percentage_\$key}"
if [ ! -z "\${partition_percentage}" ]; then
if [ \${default_partition_percentage} -gt \${partition_percentage} ]; then
default_partition_percentage=\$((\${default_partition_percentage}-\${partition_percentage}))
else
default_partition_percentage=0
fi
fi
done
eval "partition_percentage_\${default_partition_name}=\${default_partition_percentage}"
if [ -z "\${partition_point_boot}" ]; then
partition_point_boot="/boot"
if [ -z "\${partition_names}" ]; then
partition_names="boot"
else
partition_names="\${partition_names} boot"
fi
fi
if [ -z "\${partition_size_boot}" ]; then
partition_size_boot=500
fi
if [ -z "\${partition_maxsize_boot}" ]; then
partition_maxsize_boot=\$partition_size_boot
fi
if [ -z "\${first_disk}" ]; then
first_disk=/dev/sda
fi
#if $getVar('keep_old_partitions', '0') != "0"
echo "d-i grub-installer/with_other_os boolean true" >> /tmp/part-include
#else
echo "d-i grub-installer/only_debian boolean true" >> /tmp/part-include
#end if
echo "d-i grub-installer/bootdev string \${first_disk}" >> /tmp/part-include
echo "setup bootloader on disk \${first_disk}" >> /tmp/preseed.log
partition_param_boot="\${partition_fstype} \
\\$primary{ } \\$bootable{ } method{ format } \
format{ } use_filesystem{ } filesystem{ \${partition_fstype} } \
mountpoint{ /boot } device{ \${first_disk} } \
"
if [ -z "\${partition_point_swap}" ]; then
partition_point_swap="swap"
if [ -z "\${partition_names}" ]; then
partition_names="swap"
else
partition_names="\${partition_names} swap"
fi
fi
if [ -z "\${partition_size_swap}" ]; then
partition_size_swap=256
fi
if [ -z "\${partition_percentage_swap}" ]; then
partition_percentage_swap=10
fi
if [ -z "\${partition_maxsize_swap}" ]; then
partition_maxsize_swap=200%
fi
partition_param_swap="linux-swap \
\\$primary{ } method{ swap } format{ } \
device{ \${first_disk} } \
"
if [ -z "\${partition_point_root}" ]; then
partition_point_root="/"
if [ -z "\${partition_names}" ]; then
partition_names="root"
else
partition_names="\$partition_names root"
fi
fi
recipe="boot-root ::"
bios_partition_param="free method{ biosgrub } \
\\$primary{ } device{ \${first_disk} } \
"
recipe="\$recipe 1 1 1 \${bios_partition_param} ."
for key in \${partition_names}; do
eval "partition=\\${partition_point_\$key}"
echo "partition \$partition => \$key" >> /tmp/preseed.log
eval "partition_percentage=\\${partition_percentage_\$key}"
if [ -z "\${partition_percentage}" ]; then
partition_percentage=0
fi
echo "partition percentage \$partition => \${partition_percentage}" >> /tmp/preseed.log
eval "partition_size=\\${partition_size_\$key}"
if [ -z "\${partition_size}" ]; then
partition_size=1
fi
echo "partition size \$partition => \${partition_size}" >> /tmp/preseed.log
if [ \${partition_percentage} -ne 0 ]; then
partition_factor="\${partition_size}+\${partition_percentage}%"
else
partition_factor="\${partition_size}"
fi
echo "partition factor \$partition => \${partition_factor}" >> /tmp/preseed.log
eval "partition_maxsize=\\${partition_maxsize_\$key}"
if [ -z \${partition_maxsize} ]; then
partition_maxsize=-1
fi
echo "partition maxsize \$partition => \${partition_maxsize}" >> /tmp/preseed.log
eval "partition_param=\\${partition_param_\$key}"
if [ -z "\${partition_param}" ]; then
partition_param="\${partition_fstype} \
\\$lvmok{ } method{ format } format{ } \
use_filesystem{ } filesystem{ \${partition_fstype} } \
in_vg{ $vgname } lv_name{ \${key}vol } \
mountpoint{ \$partition }"
fi
echo "partition param \$partition => \${partition_param}" >> /tmp/preseed.log
recipe="\$recipe \${partition_size} \${partition_factor} \${partition_maxsize} \${partition_param} ."
done
for disk in \${sorted_disks}; do
#if $getVar('partition_by_path', '0') != "0"
path_name=\$(basename \${disk})
disk_path_name=\$(echo \${path_name} | tr '-' '_' | tr ':' '_' | tr '.' '_')
eval "path_disk=\\${disk_path_\${disk_path_name}}"
disk_name=\$(basename \${path_disk})
#else
disk_name=\$(basename \$disk)
#end if
eval "used_disk_\${disk_name}=\$disk"
echo "add disk \$disk into disks" >> /tmp/preseed.log
eval "max_disk_size=\\${max_disk_size_\${disk_name}}"
if [ -z "\${max_disk_size}" ]; then
max_disk_size=\${default_max_disk_size}
fi
echo "disk \${disk} max disk size \${max_disk_size}" >> /tmp/preseed.log
if [ \${max_disk_size} -gt 0 ]; then
maxsize_param=\${max_disk_size}
else
maxsize_param=-1
fi
disk_param="\${partition_fstype} \
\\$defaultignore{ } device{ \${disk} } \
method{ lvm } vg_name{ $vgname }"
recipe="\$recipe 512 512+100% \${maxsize_param} \${disk_param} ."
echo "partition param \${disk_name} => \${disk_param}" >> /tmp/preseed.log
eval "reserve_disk_size=\\${reserve_disk_size_\${disk_name}}"
if [ -z "\${reserve_disk_size}" ]; then
reserve_disk_size=\${default_reserve_disk_size}
fi
echo "disk \${disk} reserve disk size \${reserve_disk_size}" >> /tmp/preseed.log
if [ \${reserve_disk_size} -gt 0 ]; then
reserve_disk_param="\${partition_fstype} \
\\$defaultignore{ } device{ \${disk} } \
method{ lvm } vg_name{ reserved }"
recipe="\$recipe \${reserve_disk_size} \${reserve_disk_size} \${reserve_disk_size} \${reserve_disk_param} ."
echo "reserve partition param \${disk_name} => \${reserve_disk_param}" >> /tmp/preseed.log
fi
done
#if $getVar('keep_old_partitions', '0') == "0"
for disk in \$disks; do
#if $getVar('partition_by_path', '0') != "0"
path_name=\$(basename \${disk})
disk_path_name=\$(echo \${path_name} | tr '-' '_' | tr ':' '_' | tr '.' '_')
eval "path_disk=\\${disk_path_\${disk_path_name}}"
disk_name=\$(basename \${path_disk})
#else
disk_name=\$(basename \$disk)
#end if
eval "used_disk=\\${used_disk_\${disk_name}}"
if [ -z "\${used_disk}" ]; then
reserve_disk_param="\${partition_fstype} \
\\$defaultignore{ } device{ \${disk} } \
method{ lvm } vg_name{ reserved }"
recipe="\$recipe 512 512+100% -1 \${reserve_disk_param} ."
echo "reserve partition param \${disk_name} => \${reserve_disk_param}" >> /tmp/preseed.log
fi
done
#end if
echo "d-i partman-auto/expert_recipe string \$recipe" >> /tmp/part-include
echo "d-i partman-auto/choose_recipe select boot-root" >> /tmp/part-include
## echo "d-i partman-lvm/vgcreate string $vgname" >> /tmp/part-include
## echo "d-i partman-auto-lvm/new_vg_name string $vgname" >> /tmp/part-include