compass-core/mibs/NQA-MIB.mib

9236 lines
370 KiB
Plaintext

-- =================================================================
-- Copyright (C) 2006 by HUAWEI TECHNOLOGIES. All rights reserved
--
-- Description: Network Quality Analyse MIB.
-- Reference:
-- Version: V1.1
-- History:
-- V1.0 liyonggang 2006.6.7,publish
-- V1.1
-- modified by liyonggang
-- =================================================================
NQA-MIB DEFINITIONS ::= BEGIN
IMPORTS
IpAddress
FROM RFC1155-SMI
InterfaceIndexOrZero -- RFC2863
FROM IF-MIB
hwDatacomm
FROM HUAWEI-MIB
InetAddressType, InetAddress, InetPortNumber
FROM INET-ADDRESS-MIB
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
TimeTicks, Integer32, Gauge32, Counter32, Unsigned32, OBJECT-TYPE,mib-2, NOTIFICATION-TYPE, NOTIFICATION-GROUP,
MODULE-IDENTITY
FROM SNMPv2-SMI
DisplayString, TruthValue, TimeStamp, RowStatus, TimeInterval, StorageType,MacAddress,
DateAndTime, TEXTUAL-CONVENTION
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- RFC2571
Dot1agCfmMepIdOrZero, Dot1agCfmMaintDomainName, Dot1agCfmMaintAssocName
FROM IEEE802171-CFM-MIB
EnabledStatus
FROM P-BRIDGE-MIB
VlanIdOrNone
FROM Q-BRIDGE-MIB -- [RFC4363]
HWDot1agCfmRelayActionFieldValue, HWDot1agCfmIngressActionFieldValue, HWDot1agCfmEgressActionFieldValue
FROM HUAWEI-ETHOAM-MIB;
nqa MODULE-IDENTITY
LAST-UPDATED "200601091739Z"-- January 09, 2006 at 17:39 GMT
ORGANIZATION
"Huawei Technologies Co., Ltd."
CONTACT-INFO
"R&D BeiJing, Huawei Technologies co.,Ltd.
Huawei Bld.,NO.3 Xinxi Rd.,
Shang-Di Information Industry Base,
Hai-Dian District Beijing P.R. China
Zip:100085
Http://www.huawei.com
E-mail:support@huawei.com"
DESCRIPTION
"HUAWEI service quality detect funcion."
::= { hwDatacomm 111 }
--
-- Textual conventions
--
NqaType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Select test type"
SYNTAX INTEGER
{
unknown(0),
tcpConnect(1),
udpEcho(2),
httpAppl(3),
ftpAppl(4),
jitterAppl(5),
icmpAppl(6),
snmpAppl(7),
traceRoute(8),
lspPing(9),
lspTraceRoute(10),
dnsAppl(11),
dhcpAppl(12),
dlswAppl(13),
pwe3Ping(14),
pwe3Tracert(15),
mPing(16),
mTracert(17),
macPing(18),
macTunnelPing(19),
lspJitter(20),
pathMtu(21),
icmpJitter(22),
pathJitter(23),
pppoe(24),
vplsmPing(25),
vplsmacPing(26),
vplsmacTrace(27),
vplsMTrace(28),
gmacping(29),
gmactrace(30),
mactrace(31),
vplspwping(32),
vplspwtrace(33)
}
EnableValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a boolean value."
SYNTAX INTEGER
{
enable(1),
disable(2)
}
NqaDistanceNodeType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Selection of destination addresses when MACPing is performed."
SYNTAX INTEGER
{
macAddress(1),
mepID(2)
}
HWLldpPortIdSubtype ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"LLDP interface ID sub type"
SYNTAX INTEGER
{
interfaceAlias(1),
portComponent(2),
macAddress(3),
networkAddress(4),
interfaceName(5),
agentCircuitId(6),
local(7)
}
HWLldpPortId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the format of a port identifier string.
Objects of this type are always used with an associated
LldpPortIdSubtype object, which identifies the format of the
particular LldpPortId object instance.
If the associated LldpPortIdSubtype object has a value of
'interfaceAlias(1)', then the octet string identifies a
particular instance of the ifAlias object (defined in IETF
RFC 2863). If the particular ifAlias object does not contain
any values, another port identifier type should be used.
If the associated LldpPortIdSubtype object has a value of
'portComponent(2)', then the octet string identifies a
particular instance of the entPhysicalAlias object (defined
in IETF RFC 2737) for a port or backplane component.
If the associated LldpPortIdSubtype object has a value of
'macAddress(3)', then this string identifies a particular
unicast source address (encoded in network byte order
and IEEE 802.3 canonical bit order) associated with the port
(IEEE Std 802-2001).
If the associated LldpPortIdSubtype object has a value of
'networkAddress(4)', then this string identifies a network
address associated with the port. The first octet contains
the IANA AddressFamilyNumbers enumeration value for the
specific address type, and octets 2 through N contain the
networkAddress address value in network byte order.
If the associated LldpPortIdSubtype object has a value of
'interfaceName(5)', then the octet string identifies a
particular instance of the ifName object (defined in IETF
RFC 2863). If the particular ifName object does not contain
any values, another port identifier type should be used.
If the associated LldpPortIdSubtype object has a value of
'agentCircuitId(6)', then this string identifies a agent-local
identifier of the circuit (defined in RFC 3046).
If the associated LldpPortIdSubtype object has a value of
'local(7)', then this string identifies a locally
assigned port ID."
SYNTAX OCTET STRING (SIZE (1..255))
NqaOperation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Paras for specified test."
SYNTAX INTEGER
{
noOperation(1),
httpGet(2),
httpPost(3),
ftpGet(4),
ftpPut(5)
}
--
-- Node definitions
--
nqaBase OBJECT IDENTIFIER ::= { nqa 1 }
nqaVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NQA version (for example, 1.1).
It can be used for version management."
::= { nqaBase 1 }
nqaEnable OBJECT-TYPE
SYNTAX EnableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the switch of enabling NQA client.
(The value range: enable:1; disable:2.The default value is enable(1))"
::= { nqaBase 2 }
nqaReset OBJECT-TYPE
SYNTAX EnableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all the enabled test configurations.
(The value range: enable:1; disable:2. The default value is disable(2))"
::= { nqaBase 3 }
nqaTimeOfLastSetError OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time of the last configuration error.
(0 indicates that the configuration does not fail)."
::= { nqaBase 4 }
nqaLastSetError OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time of the last configuration error.
(0 indicates that the configuration does not fail)."
::= { nqaBase 5 }
nqaNumOfCurrentCtrlEntry OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The total number of current configuration tests."
::= { nqaBase 6 }
nqaMaxConcurrentRequests OBJECT-TYPE
SYNTAX Unsigned32
UNITS "requests"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of concurrent active requests
that are allowed within an agent implementation."
::= { nqaBase 7 }
nqaMaxNumOfRequests OBJECT-TYPE
SYNTAX Unsigned32
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of requests
that are allowed within an agent implementation. "
::= { nqaBase 8 }
nqaJitterVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the version of jitter test.
(The value range: old version:1, new version:2. The default value is old version(1))"
::= { nqaBase 9 }
nqaSupportTestType OBJECT-TYPE
SYNTAX BITS
{
icmp(0),
tcp(1),
udp(2),
http(3),
ftp(4),
jitter(5),
snmp(6),
trace(7),
lspPing(8),
lspTrace(9),
dns(10),
dhcp(11),
dlsw(12),
pwe3Ping(13),
pwe3Trace(14),
mPing(15),
mTrace(16),
macPing(17),
macTunnelPing(18),
lspJitter(19),
icmpJitter(20),
pathJitter(21),
pathMtu(22),
pppoe(23),
vplsmPing(24),
vplsmacPing(25),
vplsmacTrace(26),
vplsMTrace(27),
gmacping(28),
gmactrace(29),
mactrace(30),
vplspwping(31),
vplspwtrace(32)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Test type that the current device supports.
Data structure of the type is in the format of bits.
Each bit represents a test type.
The mappings between bits and tests are as follows:
icmp(0),
tcp(1),
udp(2),
http(3),
ftp(4),
jitter(5),
snmp(6),
trace(7),
lspPing(8),
lspTrace(9),
dns(10),
dhcp(11),
dlsw(12),
pwe3Ping(13),
pwe3Trace(14),
mPing(15),
mTrace(16),
macPing(17),
macTunnelPing(18),
lspJitter(19),
icmpJitter(20),
pathJitter(21),
pathMtu(22),
pppoe(23),
vplsmPing(24),
vplsmacPing(25),
vplsmacTrace(26),
vplsMTrace(27),
gmacping(28),
gmactrace(29),
mactrace(30),
vplspwping(31),
vplspwtrace(32)
The value #0x00 indicates don't suppourt all testtypes."
::= { nqaBase 10}
nqaSupportServerType OBJECT-TYPE
SYNTAX BITS
{
tcpServer(0),
udpServer(1),
icmpServer(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Test type that the current device supports.
Data structure of the type is in the format of bits.
Each bit represents a test type.
tcpServer(0),
udpServer(1),
icmpServer(2)
The value #0x00 indicates don't suppourt all servertypes."
::= { nqaBase 11}
nqaCtrl OBJECT IDENTIFIER ::= { nqa 2 }
nqaAdminCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaAdminCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of NQA monitoring definitions."
::= { nqaCtrl 1 }
nqaAdminCtrlEntry OBJECT-TYPE
SYNTAX NqaAdminCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the nqaAdminCtrlTable."
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName }
::= { nqaAdminCtrlTable 1 }
NqaAdminCtrlEntry ::=
SEQUENCE {
nqaAdminCtrlOwnerIndex
SnmpAdminString,
nqaAdminCtrlTestName
SnmpAdminString,
nqaAdminCtrlTag
DisplayString,
nqaAdminCtrlType
NqaType,
nqaAdminCtrlFrequency
Integer32,
nqaAdminCtrlTimeOut
Integer32,
nqaAdminCtrlThreshold1
Integer32,
nqaAdminCtrlThreshold2
Integer32,
nqaAdminCtrlThreshold3
Integer32,
nqaAdminCtrlStatus
RowStatus
}
nqaAdminCtrlOwnerIndex OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"To facilitate the provisioning of access control by a
security administrator using the View-Based Access
Control Model for tables in which multiple users may
need to independently create or modify entries,
the initial index is used as an 'ownerindex'.
When used in conjunction with such a security policy
all entries in the table belonging to a particular user
(or group) will have the same value for this initial
index. For a given user's entries in a particular
table, the object identifiers for the information in
these entries will have the same subidentifiers (except
for the 'column' subidentifier) up to the end of the
encoded owner index."
::= { nqaAdminCtrlEntry 1 }
nqaAdminCtrlTestName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of a test. This is locally unique,
within the scope of an nqaAdminCtrlOwnerIndex."
::= { nqaAdminCtrlEntry 2 }
nqaAdminCtrlTag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which is the description of the test instance."
::= { nqaAdminCtrlEntry 3 }
nqaAdminCtrlType OBJECT-TYPE
SYNTAX NqaType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the test instance."
::= { nqaAdminCtrlEntry 4 }
nqaAdminCtrlFrequency OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the interval when the test instance repeats."
DEFVAL { 0 }
::= { nqaAdminCtrlEntry 5 }
nqaAdminCtrlTimeOut OBJECT-TYPE
SYNTAX Integer32 (1..60)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the duration to wait for the completion of test
instance. The default value of DHCP-type and FTP-type test
instance is 15s, The default value of PPPoE-type test
instance is 30s, and that of other types is 3s."
::= { nqaAdminCtrlEntry 6 }
nqaAdminCtrlThreshold1 OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the threshold of RTD (Round Trip Delay). If the
RTT violates the threshold, the corresponding counter will
increase. It applies to any type of test instance."
DEFVAL { 0 }
::= { nqaAdminCtrlEntry 7 }
nqaAdminCtrlThreshold2 OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the threshold of OWD (One Way Delay) from source
to destination. If the OWD violates the threshold, the
corresponding counter will increase. It applies only to
jitter-type test instances."
DEFVAL { 0 }
::= { nqaAdminCtrlEntry 8 }
nqaAdminCtrlThreshold3 OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the threshold of OWD (One Way Delay) from
destination to source. If the OWD violates the threshold,
the corresponding counter will increase. It applies only
to jitter-type test instances."
DEFVAL { 0 }
::= { nqaAdminCtrlEntry 9 }
nqaAdminCtrlStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"To set the value of this object can create or delete the
specified test instance and the records belonging to it.
Before deleting a test instance, the custom must make sure
that the status of the test instance is inactive through
nqaScheduleOperStatus. The value can be set to
'CreateAndGo (4)', 'Destroy (6)' and 'Active (1)'."
REFERENCE
"See definition of RowStatus in RFC 2579, 'Textual
Conventions for SMIv2.'"
::= { nqaAdminCtrlEntry 10 }
nqaAdminParaTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaAdminParaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Set parameter for a test. "
::= { nqaCtrl 2 }
nqaAdminParaEntry OBJECT-TYPE
SYNTAX NqaAdminParaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"set parameter in the nqaAdminParaTable."
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName }
::= { nqaAdminParaTable 1 }
NqaAdminParaEntry ::=
SEQUENCE {
nqaAdminParaTargetAddressType
InetAddressType,
nqaAdminParaTargetAddress
InetAddress,
nqaAdminParaTargetPort
InetPortNumber,
nqaAdminParaSourceAddressType
InetAddressType,
nqaAdminParaSourceAddress
InetAddress,
nqaAdminParaSourcePort
InetPortNumber,
nqaAdminParaMaxTtl
Unsigned32,
nqaAdminParaInitialTtl
Unsigned32,
nqaAdminParaStorageType
StorageType,
nqaAdminParaMaxFailures
Unsigned32,
nqaAdminParaDontFragment
TruthValue,
nqaAdminParaDataSize
Unsigned32,
nqaAdminParaDataFill
OCTET STRING,
nqaAdminParaIfIndex
InterfaceIndexOrZero,
nqaAdminParaByPassRouteTable
TruthValue,
nqaAdminParaMiscOptions
SnmpAdminString,
nqaAdminParaProbeCount
Unsigned32,
nqaAdminParaTrapGeneration
BITS,
nqaAdminParaTrapProbeFailureFilter
Unsigned32,
nqaAdminParaTrapTestFailureFilter
Unsigned32,
nqaAdminParaDSField
Integer32,
nqaAdminParaDnsServerAddressType
InetAddressType,
nqaAdminParaDnsServerAddress
InetAddress,
nqaAdminParaOperation
NqaOperation,
nqaAdminParaHttpVersion
DisplayString,
nqaAdminParaHttpOperationString
DisplayString,
nqaAdminParaTestFailurePercent
Unsigned32,
nqaAdminParaFtpUserName
DisplayString,
nqaAdminParaFtpPassword
DisplayString,
nqaAdminParaFtpFilePath
DisplayString,
nqaAdminParaFtpFileSize
Integer32,
nqaAdminParaInterval
Integer32,
nqaAdminParaNumPackets
Integer32,
nqaAdminParaVrfName
DisplayString,
nqaAdminParaLspAddressType
INTEGER,
nqaAdminParaLspAddressMask
Integer32,
nqaAdminParaLspIpAddress
InetAddress,
nqaAdminParaLspPWE3VcId
Unsigned32,
nqaAdminParaLspPWE3Type
INTEGER,
nqaAdminParaLspPWE3Option
INTEGER,
nqaAdminParaLspPWE3RemoteVcId
Unsigned32,
nqaAdminParaLspPWE3RemoteAddress
InetAddress,
nqaAdminParaLspExp
Unsigned32,
nqaAdminParaLspReplyMode
INTEGER,
nqaAdminParaResultRowMax
Integer32,
nqaAdminParaHistoryRowMax
Integer32,
nqaAdminParaCreateHopsEntries
EnableValue,
nqaAdminParaLspVCType
INTEGER,
nqaAdminParaMTraceLastHopAddress
InetAddress,
nqaAdminParaMTraceSourceAddress
InetAddress,
nqaAdminParaMTraceGroupAddress
InetAddress,
nqaAdminParaMTraceMaxTtl
Unsigned32,
nqaAdminParaMTraceSendMode
INTEGER,
nqaAdminParaMTraceResponseTtl
Unsigned32,
nqaAdminParaMTraceResponseAddressType
InetAddressType,
nqaAdminParaMTraceResponseAddress
InetAddress,
nqaAdminParaDistanceNodeType
NqaDistanceNodeType,
nqaAdminParaMacAddress
MacAddress,
nqaAdminParaRMepID
Dot1agCfmMepIdOrZero,
nqaAdminParaMDName
OCTET STRING,
nqaAdminParaMAName
OCTET STRING,
nqaAdminParaMacTunnelName
OCTET STRING,
nqaAdminParaPathMtuStep
Integer32,
nqaAdminParaPathMtuDiscoveryPathMtuMax
Integer32,
nqaAdminParaIcmpJitterMode
INTEGER,
nqaAdminParaCodecType
INTEGER,
nqaAdminParaIcpifAdvFactor
Integer32,
nqaAdminParaFtpMode
INTEGER,
nqaAdminParaHardwareBased
EnabledStatus,
nqaAdminParaPppoeUserName
OCTET STRING,
nqaAdminParaPppoePassword
OCTET STRING,
nqaAdminParaPppoeVlanIf
Integer32,
nqaAdminParaPppoeAuthenticationMode
INTEGER,
nqaAdminParaPppoeRedialUpTimes
Integer32,
nqaAdminParaPppoeInterval
Integer32,
nqaAdminParaVsiName
OCTET STRING,
nqaAdminParaVlanId
VlanIdOrNone,
nqaAdminParaLspTunnelType
INTEGER,
nqaAdminParaLspNextHopAddress
InetAddress,
nqaAdminParaLspVersion
INTEGER,
nqaAdminParaRemoteAddressType
InetAddressType,
nqaAdminParaRemoteAddress
InetAddress,
nqaAdminParaTimeUnit
INTEGER
}
nqaAdminParaTargetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents the address type of destination."
DEFVAL { unknown }
::= { nqaAdminParaEntry 1 }
nqaAdminParaTargetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents the address of destination."
::= { nqaAdminParaEntry 2 }
nqaAdminParaTargetPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents the port number of destination."
::= { nqaAdminParaEntry 3 }
nqaAdminParaSourceAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents the address type of source."
DEFVAL { unknown }
::= { nqaAdminParaEntry 4 }
nqaAdminParaSourceAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents the address of source."
::= { nqaAdminParaEntry 5 }
nqaAdminParaSourcePort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents the port number of source."
::= { nqaAdminParaEntry 6 }
nqaAdminParaMaxTtl OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "time-to-live value"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum value of TTL. The value cannot be set to 0 unless the test-type is pwe3ping, the lsp-version is rfc4379, and the ttl-copymode is pipe."
::= { nqaAdminParaEntry 7 }
nqaAdminParaInitialTtl OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the initial value of TTL."
DEFVAL { 1 }
::= { nqaAdminParaEntry 8 }
nqaAdminParaStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access
to any columnar objects in the row."
DEFVAL { nonVolatile }
::= { nqaAdminParaEntry 9 }
nqaAdminParaMaxFailures OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
UNITS "timeouts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object indicates the maximum number of
consecutive timeouts allowed before terminating a remote
traceroute request. A value of 255 (maximum hop
count/possible TTL value) indicates that the function
of terminating a remote traceroute request when a specific
number of successive timeouts are detected is disabled."
DEFVAL { 5 }
::= { nqaAdminParaEntry 10 }
nqaAdminParaDontFragment OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables setting of Don't Fragment (DF) flag in
the IP header for a probe. Use of this object enables
performing a manual PATH MTU test."
DEFVAL { false }
::= { nqaAdminParaEntry 11 }
nqaAdminParaDataSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "octets"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The size of data field in packet."
DEFVAL { 0 }
::= { nqaAdminParaEntry 12 }
nqaAdminParaDataFill OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents the characters used for filling the data field.
This object is used together with the corresponding object,
nqaAdminParaDataSize."
DEFVAL { '00'H }
::= { nqaAdminParaEntry 13 }
nqaAdminParaIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specified the source interface or tunnel, from which probes
of the test instance are sent. The object applies to DHCP,
jitter, icmpjitter, ICMP, lspping or lsptrace type test instance.
The value zero implies that the object is disabled."
DEFVAL { 0 }
::= { nqaAdminParaEntry 14 }
nqaAdminParaByPassRouteTable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The purpose of this object is to optionally enable bypassing
the route table. If enabled, the remote host will bypass the
normal routing tables and send directly to a host on an attached
network. If the host is not on a directly-attached network, an
error is returned. This option can be used to perform the
ping/traceroute operation to a local host through an interface
that has no route defined (e.g., after the interface was dropped
by routed)."
DEFVAL { false }
::= { nqaAdminParaEntry 15 }
nqaAdminParaMiscOptions OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables an application to specify implementation dependent options."
DEFVAL { ''H }
::= { nqaAdminParaEntry 16 }
nqaAdminParaProbeCount OBJECT-TYPE
SYNTAX Unsigned32 (1..15)
UNITS "probes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of packets sent by the test instance, or times
of probe repeated, in which may send several packets. The second case
applies to jitter-type test instances."
::= { nqaAdminParaEntry 17 }
nqaAdminParaTrapGeneration OBJECT-TYPE
SYNTAX BITS {
probeFailure(0),
testFailure(1),
testCompletion(2),
overRtdThreshold(3),
overOwdThresholdSd(4),
overOwdThresholdDs(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Switch of notification. Determine whether and how to send notifications
for the test instance:
- probeFailure(0) - Generate a PathChange notification when the current
path varies from a previously determined path.
- testFailure(1) - Generate a TestFailed notification when the full
path to a target can't be determined.
- testCompletion(2) - Generate a TestCompleted notification when the path
to a target has been determined.
- overRtdThreshold(3) - Generate a Overthreshold of RTD notification when
the statistic results exceed threshold.
- overOwdThresholdSd(4) - Generate a Overthreshold of OWD-SD notification
when the statistic results exceed threshold.
- overOwdThresholdDs(5) - Generate a Overthreshold of OWD-DS notification
when the statistic results exceed threshold.
The value #0x00 indicates disable all notifications."
::= { nqaAdminParaEntry 18 }
nqaAdminParaTrapProbeFailureFilter OBJECT-TYPE
SYNTAX Unsigned32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the condition when to trigger an nqaProbeFailed notification.
When the number of consecutive failed probes violates the threshold indicated
by nqaAdminParaTrapProbeFailureFilter, a notification will be created. This
object is used together with nqaAdminParaTrapGeneration."
DEFVAL { 1 }
::= { nqaAdminParaEntry 19 }
nqaAdminParaTrapTestFailureFilter OBJECT-TYPE
SYNTAX Unsigned32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the condition when to trigger an nqaTestFailed notification. When
the number of failed tests violates the threshold indicated by
nqaAdminParaTrapTestFailureFilter, a notification will be created. There are
usually several probes in each test. This object is used together with
nqaAdminParaTrapGeneration."
DEFVAL { 1 }
::= { nqaAdminParaEntry 20 }
nqaAdminParaDSField OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Differentiated Services (DS) field in the IP packet. The DS
field is defined as the Type Of Service (TOS) octet in IPv4 header or as
the Traffic Class octet in IPv6 header."
DEFVAL { 0 }
::= { nqaAdminParaEntry 21 }
nqaAdminParaDnsServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the address type of DNS server."
DEFVAL { unknown }
::= { nqaAdminParaEntry 22 }
nqaAdminParaDnsServerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the address of DNS server."
::= { nqaAdminParaEntry 23 }
nqaAdminParaOperation OBJECT-TYPE
SYNTAX NqaOperation
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the operation of FTP or HTTP type test instance. The
operations of FTP-type test instance include get and put. The
operations of HTTP-type test instance include get and post."
DEFVAL { noOperation }
::= { nqaAdminParaEntry 24 }
nqaAdminParaHttpVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the version of HTTP."
::= { nqaAdminParaEntry 25 }
nqaAdminParaHttpOperationString OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string that specifies the HTTP operation which will be sent
to the HTTP server."
::= { nqaAdminParaEntry 26 }
nqaAdminParaTestFailurePercent OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the scale over which the test will be regarded as failed."
DEFVAL { 100 }
::= { nqaAdminParaEntry 27 }
nqaAdminParaFtpUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the user name of the FTP server."
::= { nqaAdminParaEntry 28 }
nqaAdminParaFtpPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the password of the user of the FTP server."
::= { nqaAdminParaEntry 29 }
nqaAdminParaFtpFilePath OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the full name of the file which will be transmitted
by the FTP-type test instance."
::= { nqaAdminParaEntry 30 }
nqaAdminParaFtpFileSize OBJECT-TYPE
SYNTAX Integer32 (0..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the size that the file will be transmitted by the
FTP-type test instance. It may be part of the file."
::= { nqaAdminParaEntry 31 }
nqaAdminParaInterval OBJECT-TYPE
SYNTAX Integer32 (0..60000)
UNITS "millseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the interval between two consecutive probe packets."
::= { nqaAdminParaEntry 32 }
nqaAdminParaNumPackets OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of packet sent in each probe. This object
is used together with nqaAdminParaProbeCount, and only apples to
jitter-type test instance."
DEFVAL { 20 }
::= { nqaAdminParaEntry 33 }
nqaAdminParaVrfName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the VRF name."
::= { nqaAdminParaEntry 34 }
nqaAdminParaLspAddressType OBJECT-TYPE
SYNTAX INTEGER {
ipv4(1),
te(3),
ring(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the address type of LSP. The object applies to lspping,
lsptrace and lspjitter type test instance."
::= { nqaAdminParaEntry 35 }
nqaAdminParaLspAddressMask OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the address mask of LSP. The object apples to lspping,
lsptrace and lspjitter type test instance."
::= { nqaAdminParaEntry 36 }
nqaAdminParaLspIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Address filled in the ip header, must be a 127/8 address."
::= { nqaAdminParaEntry 37 }
nqaAdminParaLspPWE3VcId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The local Pseudo wire ID in PWE3 Ping test"
::= { nqaAdminParaEntry 38 }
nqaAdminParaLspPWE3Type OBJECT-TYPE
SYNTAX INTEGER {
fr(1),
atmAal5Sdu(2),
atm-cell-transport(3),
vlan(4),
ethernet(5),
hdlc(6),
ppp(7),
atm-nto1-vcc(9),
atm-nto1-vpc(10),
ip-layer2(11),
atm-1to1-vcc(12),
atm-1to1-vpc(13),
satop-e1(17),
satop-t1(18),
satop-e3(19),
cesopsn-basic(21),
ipInterworking(64)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The encapsulation type of Pseudo wire ID in the PWE3 Ping test"
::= { nqaAdminParaEntry 39 }
nqaAdminParaLspPWE3Option OBJECT-TYPE
SYNTAX INTEGER {
labelAlert(1),
controlWord(2),
normal(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The label type of PWE3 Ping and PWE3 Tracert test."
::= { nqaAdminParaEntry 40 }
nqaAdminParaLspPWE3RemoteVcId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The remote Pseudo wire ID in PWE Ping test."
::= { nqaAdminParaEntry 41 }
nqaAdminParaLspPWE3RemoteAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The remote IP address in PWE3 Ping test."
::= { nqaAdminParaEntry 42 }
nqaAdminParaLspExp OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 3bit EXP field of the MPLS echo packet label."
DEFVAL { 0 }
::= { nqaAdminParaEntry 43 }
nqaAdminParaLspReplyMode OBJECT-TYPE
SYNTAX INTEGER {
noReply(1),
udp(2),
udpRouterAlert(3),
levelControlChannel(4),
udpviaVPLS(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ReplyMode
Value Meaning
----- -------
1 Do not reply
2 Reply via an IPv4/IPv6 UDP packet
3 Reply via an IPv4/IPv6 UDP packet with Router Alert
4 Reply via application level control channel
5 Reply via a VPLS IPv4 UDP packet"
DEFVAL { udp }
::= { nqaAdminParaEntry 44 }
nqaAdminParaResultRowMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum number of result records."
DEFVAL { 5 }
::= { nqaAdminParaEntry 45 }
nqaAdminParaHistoryRowMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum number of history records."
DEFVAL { 50 }
::= { nqaAdminParaEntry 46 }
nqaAdminParaCreateHopsEntries OBJECT-TYPE
SYNTAX EnableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to 'enable (1)', the result of each hop
will be kept in nqaResultsTable. The object applies
to trace, pwe3trace, lsptrace, mtrace type test instance."
DEFVAL { disable }
::= { nqaAdminParaEntry 47 }
nqaAdminParaLspVCType OBJECT-TYPE
SYNTAX INTEGER {
ldp(1),
bgp(2),
bgpad(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of protocol which establishes PW in the pwe3tracert test"
::= { nqaAdminParaEntry 48 }
nqaAdminParaMTraceLastHopAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The last hop router's IP address in Mtrace test."
::= { nqaAdminParaEntry 49 }
nqaAdminParaMTraceSourceAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the multicast source for the path being
traced in Mtrace test."
::= { nqaAdminParaEntry 50 }
nqaAdminParaMTraceGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The group address to be traced in Mtrace test, or zero if no
group-specific information is desired."
::= { nqaAdminParaEntry 51 }
nqaAdminParaMTraceMaxTtl OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of hops that the requester wants to
trace in Mtrace test."
DEFVAL { 255 }
::= { nqaAdminParaEntry 52 }
nqaAdminParaMTraceSendMode OBJECT-TYPE
SYNTAX INTEGER {
multicastTree(1),
allRouter(2),
destination (3),
lastHop(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The sending mode of the Query pamessage in Mtrace test."
DEFVAL { multicastTree }
::= { nqaAdminParaEntry 53 }
nqaAdminParaMTraceResponseTtl OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TTL at which to multicast the response in Mtrace test,
if the response address is a multicast address."
DEFVAL { 64 }
::= { nqaAdminParaEntry 54 }
nqaAdminParaMTraceResponseAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mtrace response address type"
DEFVAL { unknown }
::= { nqaAdminParaEntry 55 }
nqaAdminParaMTraceResponseAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field specifies where the completed traceroute response
packet gets sent in Mtrace test. It can be a unicast address or
a multicast address"
::= { nqaAdminParaEntry 56 }
nqaAdminParaDistanceNodeType OBJECT-TYPE
SYNTAX NqaDistanceNodeType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination of MAC ping(mac address or rmepid)."
::= { nqaAdminParaEntry 57 }
nqaAdminParaMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mac address of the destination of MAC PING."
::= { nqaAdminParaEntry 58 }
nqaAdminParaRMepID OBJECT-TYPE
SYNTAX Dot1agCfmMepIdOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rmepid of the destination of MAC PING."
::= { nqaAdminParaEntry 59 }
nqaAdminParaMDName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..43))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate the MD name in which the MAC Ping operated."
::= { nqaAdminParaEntry 60 }
nqaAdminParaMAName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..45))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate the MA name in which the MAC Ping operated."
::= { nqaAdminParaEntry 61 }
nqaAdminParaMacTunnelName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate the MAC Tunnel name in which the MAC Ping operated."
::= { nqaAdminParaEntry 62 }
nqaAdminParaPathMtuStep OBJECT-TYPE
SYNTAX Integer32 (1..512)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the step of the path MTU test.If the last response
was received successful,the next packet's length will add
the step."
::= { nqaAdminParaEntry 63 }
nqaAdminParaPathMtuDiscoveryPathMtuMax OBJECT-TYPE
SYNTAX Integer32 (48..9198)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the max value of the discovery field in the path MTU test."
::= { nqaAdminParaEntry 64 }
nqaAdminParaIcmpJitterMode OBJECT-TYPE
SYNTAX INTEGER
{
icmpTimestamp(1),
icmpEcho(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select the type of ICMP packets to be sent in ICMP jitter and path
jitter test.The value can be icmpTimestamp(1) or icmpEcho(2)."
::= { nqaAdminParaEntry 65 }
nqaAdminParaCodecType OBJECT-TYPE
SYNTAX INTEGER
{
notDefined(1), -- no codec type is defined or codec is unknown
g711Alaw(2), -- uses G.711 A-Law
g711Ulaw(3), -- uses G.711 muHmm-Law
g729A(4) -- uses G.729A
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To indicate the codec type to be used with jitter probe. This is
applicable only for the jitter probe."
DEFVAL { notDefined }
::= { nqaAdminParaEntry 66 }
nqaAdminParaIcpifAdvFactor OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The advantage factor depends on the type of access and how the service
is to be used. This object will be used while calculating the ICPIF
(Calculated Planning Impairment Factor) values.
Suggestion values:
|---------------------------------------------------|-------|
| Service |factor |
|---------------------------------------------------|-------|
| conventional wire-line | 0 |
|---------------------------------------------------|-------|
| mobility within Building | 5 |
|---------------------------------------------------|-------|
| mobility within geographical area | 10 |
|---------------------------------------------------|-------|
| access to hard-to-reach location | 20 |
|---------------------------------------------------|-------|
"
DEFVAL {0}
::= { nqaAdminParaEntry 67 }
nqaAdminParaFtpMode OBJECT-TYPE
SYNTAX INTEGER
{
active(1), -- active mode is defined in ftp test
passive(2) -- passive mode is defined in ftp test
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To indicate the mode to be used with ftp probe. This is
applicable only for the ftp probe."
DEFVAL { active }
::= { nqaAdminParaEntry 68 }
nqaAdminParaHardwareBased OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates that the hardware is enabled to send packets.
(The value range: enable:1;disable:2.The default value is disable(2))"
::= { nqaAdminParaEntry 69 }
nqaAdminParaPppoeUserName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the username of PPPoE dial-up. For jitter,icmp,traceroute,
tcp,udp,ftp,dns,http probes, this parameter indicates that the probe
uses PPPoE encapsulation.
This parameter accepts the characters in sight only."
::= { nqaAdminParaEntry 70 }
nqaAdminParaPppoePassword OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the password of PPPoE dial-up. This is
applicable only for the PPPoE probe.
This parameter accepts the characters in sight only."
::= { nqaAdminParaEntry 71 }
nqaAdminParaPppoeVlanIf OBJECT-TYPE
SYNTAX Integer32(0..4093)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the vlanif of PPPoE dial-up. For jitter, icmp, traceroute, tcp,
udp, ftp, dns, http probes, this parameter indicates that the probe uses
PPPoE encapsulation."
::= { nqaAdminParaEntry 72 }
nqaAdminParaPppoeAuthenticationMode OBJECT-TYPE
SYNTAX INTEGER
{
chap(1),
pap(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the authentication mode of PPPoE dial-up. This is
applicable only for the PPPoE probe."
::= { nqaAdminParaEntry 73 }
nqaAdminParaPppoeRedialUpTimes OBJECT-TYPE
SYNTAX Integer32(0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the redialup times of PPPoE dial-up. This is
applicable only for the PPPoE probe."
DEFVAL { 0 }
::= { nqaAdminParaEntry 74 }
nqaAdminParaPppoeInterval OBJECT-TYPE
SYNTAX Integer32(1..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the redialup interval of PPPoE dial-up. This is
applicable only for the PPPoE probe."
DEFVAL { 60 }
::= { nqaAdminParaEntry 75 }
nqaAdminParaVsiName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the name of the VSI(Virtual Switch Instance)"
::= { nqaAdminParaEntry 76 }
nqaAdminParaVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the Vlan ID"
::= { nqaAdminParaEntry 77 }
nqaAdminParaLspTunnelType OBJECT-TYPE
SYNTAX INTEGER
{
main(0), -- ping/trace the main lsp tunnel
hotstandby(1) -- ping/trace the hot-standby lsp tunnel
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To indicate ping/trace which lsp tunnel."
DEFVAL { main }
::= { nqaAdminParaEntry 78 }
nqaAdminParaLspNextHopAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents the address of nexthop."
::= { nqaAdminParaEntry 79 }
nqaAdminParaLspVersion OBJECT-TYPE
SYNTAX INTEGER
{
draft6(1),
rfc4379(2),
ptnmode(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify lsp version of protocol. Draft-ietf-mpls-lsp-ping-06 protocol, RFC4379 protocol or ptn mode."
DEFVAL { 1 }
::= { nqaAdminParaEntry 80 }
nqaAdminParaRemoteAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents the address type of remote."
DEFVAL { unknown }
::= { nqaAdminParaEntry 81 }
nqaAdminParaRemoteAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents the address of remote."
::= { nqaAdminParaEntry 82 }
nqaAdminParaTimeUnit OBJECT-TYPE
SYNTAX INTEGER
{
us(1), -- The unit of the timestamp is us
ms(2) -- The unit of the timestamp is ms
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The unit of the timestamp, ms or us."
::= { nqaAdminParaEntry 83 }
nqaAdminParaExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaAdminParaExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Set parameter for a test."
::= { nqaCtrl 5 }
nqaAdminParaExtEntry OBJECT-TYPE
SYNTAX NqaAdminParaExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Set parameter in the nqaAdminParaExtTable."
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName }
::= { nqaAdminParaExtTable 1 }
NqaAdminParaExtEntry ::=
SEQUENCE {
nqaAdminExtPara1
OCTET STRING,
nqaAdminExtPara2
Integer32,
nqaAdminExtPara3
OCTET STRING,
nqaAdminExtPara4
Integer32,
nqaAdminExtPara5
OCTET STRING,
nqaAdminExtPara6
Integer32,
nqaAdminExtPara7
OCTET STRING,
nqaAdminExtPara8
Integer32,
nqaAdminExtPara9
OCTET STRING,
nqaAdminExtPara10
Integer32,
nqaAdminExtPara11
OCTET STRING,
nqaAdminExtPara12
Integer32,
nqaAdminExtPara13
OCTET STRING,
nqaAdminExtPara14
Integer32,
nqaAdminExtPara15
OCTET STRING,
nqaAdminExtPara16
Integer32,
nqaAdminExtPara17
OCTET STRING,
nqaAdminExtPara18
Integer32,
nqaAdminExtPara19
OCTET STRING,
nqaAdminExtPara20
Integer32,
nqaAdminExtPara21
OCTET STRING,
nqaAdminExtPara22
Integer32,
nqaAdminExtPara23
OCTET STRING,
nqaAdminExtPara24
Integer32,
nqaAdminExtPara25
OCTET STRING,
nqaAdminExtPara26
Integer32,
nqaAdminExtPara27
OCTET STRING,
nqaAdminExtPara28
Integer32,
nqaAdminExtPara29
OCTET STRING,
nqaAdminExtPara30
Integer32,
nqaAdminExtPara31
OCTET STRING,
nqaAdminExtPara32
OCTET STRING,
nqaAdminExtPara33
OCTET STRING,
nqaAdminExtPara34
OCTET STRING,
nqaAdminExtPara35
OCTET STRING,
nqaAdminExtPara36
OCTET STRING,
nqaAdminExtPara37
OCTET STRING,
nqaAdminExtPara38
OCTET STRING,
nqaAdminExtPara39
OCTET STRING,
nqaAdminExtPara40
OCTET STRING,
nqaAdminExtPara41
OCTET STRING,
nqaAdminExtPara42
OCTET STRING,
nqaAdminExtPara43
OCTET STRING,
nqaAdminExtPara44
OCTET STRING,
nqaAdminExtPara45
OCTET STRING,
nqaAdminExtPara46
OCTET STRING,
nqaAdminExtPara47
OCTET STRING,
nqaAdminExtPara48
OCTET STRING,
nqaAdminExtPara49
OCTET STRING,
nqaAdminExtPara50
OCTET STRING
}
nqaAdminExtPara1 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara2 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 1 }
nqaAdminExtPara2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara1 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 2 }
nqaAdminExtPara3 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara4 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 3 }
nqaAdminExtPara4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara3 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 4 }
nqaAdminExtPara5 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara6 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 5 }
nqaAdminExtPara6 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara5 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 6 }
nqaAdminExtPara7 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara8 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 7 }
nqaAdminExtPara8 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara7 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 8 }
nqaAdminExtPara9 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara10 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 9 }
nqaAdminExtPara10 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara9 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 10 }
nqaAdminExtPara11 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara12 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 11 }
nqaAdminExtPara12 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara11 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 12 }
nqaAdminExtPara13 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara14 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 13 }
nqaAdminExtPara14 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara13 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 14 }
nqaAdminExtPara15 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara16 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 15 }
nqaAdminExtPara16 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara15 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 16 }
nqaAdminExtPara17 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara18 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 17 }
nqaAdminExtPara18 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara17 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 18 }
nqaAdminExtPara19 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara20 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 19 }
nqaAdminExtPara20 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara19 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 20 }
nqaAdminExtPara21 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara22 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 21 }
nqaAdminExtPara22 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara21 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 22 }
nqaAdminExtPara23 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara24 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 23 }
nqaAdminExtPara24 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara23 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 24 }
nqaAdminExtPara25 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara26 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 25 }
nqaAdminExtPara26 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara25 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 26 }
nqaAdminExtPara27 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara28 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 27 }
nqaAdminExtPara28 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara27 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 28 }
nqaAdminExtPara29 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara30 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 29 }
nqaAdminExtPara30 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara29 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 30 }
nqaAdminExtPara31 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara32 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 31 }
nqaAdminExtPara32 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara31 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 32 }
nqaAdminExtPara33 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara34 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 33 }
nqaAdminExtPara34 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara33 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 34 }
nqaAdminExtPara35 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara36 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 35 }
nqaAdminExtPara36 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara35 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 36 }
nqaAdminExtPara37 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara38 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 37 }
nqaAdminExtPara38 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara37 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 38 }
nqaAdminExtPara39 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara40 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 39 }
nqaAdminExtPara40 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara39 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 40 }
nqaAdminExtPara41 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara42 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 41 }
nqaAdminExtPara42 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara41 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 42 }
nqaAdminExtPara43 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara44 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 43 }
nqaAdminExtPara44 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara43 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 44 }
nqaAdminExtPara45 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara46 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 45 }
nqaAdminExtPara46 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara45 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 46 }
nqaAdminExtPara47 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara48 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 47 }
nqaAdminExtPara48 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara47 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 48 }
nqaAdminExtPara49 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the description of the nqaAdminExtPara50 object.
The value is automatically assigned by the system after the type of the test case is ascertained."
::= { nqaAdminParaExtEntry 49 }
nqaAdminExtPara50 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is a configurable NQA parameter object.
Its value and meaning are assigned by the nqaAdminExtPara49 object after the test case is ascertained."
DEFVAL { 0 }
::= { nqaAdminParaExtEntry 50 }
nqaScheduleTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaScheduleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Schedule test ."
::= { nqaCtrl 3 }
nqaScheduleEntry OBJECT-TYPE
SYNTAX NqaScheduleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Set start-up in the nqaAdminParaTable."
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName }
::= { nqaScheduleTable 1 }
NqaScheduleEntry ::=
SEQUENCE {
nqaScheduleStartType
INTEGER,
nqaScheduleStartTime
Unsigned32,
nqaScheduleEndType
INTEGER,
nqaScheduleEndTime
Unsigned32,
nqaScheduleAgeTime
Integer32,
nqaScheduleElapsedTime
TimeInterval,
nqaScheduleNumOfInitiations
Integer32,
nqaScheduleLastFinishIndex
Integer32,
nqaScheduleOperStatus
INTEGER,
nqaScheduleLastCollectIndex
Integer32
}
nqaScheduleStartType OBJECT-TYPE
SYNTAX INTEGER{
default(0),
startNow(1),
startAt(2),
startAfter(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the start type of the test instance. The object
is used together with nqaScheduleStartTime."
DEFVAL { 0 }
::= { nqaScheduleEntry 1 }
nqaScheduleStartTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the start time of the test instance. Setting
the value to 0 indicates to start the test instance
immediately. After configuring this object, the status
of the test instance is active, and the parameters of
the test instance can't be changed."
::= { nqaScheduleEntry 2 }
nqaScheduleEndType OBJECT-TYPE
SYNTAX INTEGER{
default(0),
endAt(1),
endAfter(2),
endLifetime(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the end type of the test instance. The object
is used together with nqaScheduleEndTime."
DEFVAL { 0 }
::= { nqaScheduleEntry 3 }
nqaScheduleEndTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the end time of the test instance."
::= { nqaScheduleEntry 4 }
nqaScheduleAgeTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the aging time of the test instance, the time
how long the test instance will be reserved in NQA, after
the test instance is inactive. Setting the value to 0
indicates reserving the test instance eternally."
::= { nqaScheduleEntry 5 }
nqaScheduleElapsedTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The elapsed time (the period of time after task dispatch)."
::= { nqaScheduleEntry 6 }
nqaScheduleNumOfInitiations OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the times that the test instance has been initialed.
This object is used as the index of the result table, HTTP
statistics table, jitter statistics table, FTP statistics
table and history table."
::= { nqaScheduleEntry 7 }
nqaScheduleLastFinishIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the latest finished test of the test instance,
which is used as the index of the result table."
::= { nqaScheduleEntry 8 }
nqaScheduleOperStatus OBJECT-TYPE
SYNTAX INTEGER
{
reset(1),
stop(2),
restart(3),
active(4),
inactive(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the status of dispatching operation:
- reset: Clear all the records of the test instance.
- stop: Stop the test instance, if it's running.
- restart: Stop the test instance, if it's running,
and restart the test instance immediately.
- active: The test instance is running; the parameters
of the test instances can't be changed.
- inactive: The test instance doesn't be scheduled;
the parameters of the test instances can be changed."
::= { nqaScheduleEntry 9 }
nqaScheduleLastCollectIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the index of the latest collection statistics
result record in the collection result table."
::= { nqaScheduleEntry 10 }
nqaGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Set group for a test."
::= { nqaCtrl 4 }
nqaGroupEntry OBJECT-TYPE
SYNTAX NqaGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Set parameters in the nqaGroupTable."
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName }
::= { nqaGroupTable 1 }
NqaGroupEntry ::=
SEQUENCE {
nqaGroupStatusType
INTEGER,
nqaGroupPeriod
Integer32,
nqaGroupLeaderOwnerIndex
SnmpAdminString,
nqaGroupLeaderTestName
SnmpAdminString,
nqaGroupMemberNum
Integer32,
nqaGroupMemberFree
EnableValue
}
nqaGroupStatusType OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
leader(2),
member(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the group status of the test instance. The
value can be normal (1), leader (2) or member (3)."
DEFVAL { 1 }
::= { nqaGroupEntry 1 }
nqaGroupPeriod OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the interval during which all members in
the specified group will be executed."
DEFVAL { 60 }
::= { nqaGroupEntry 2 }
nqaGroupLeaderOwnerIndex OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the owner index of the group leader, if the
test instance is a member of the group."
::= { nqaGroupEntry 3 }
nqaGroupLeaderTestName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the test name of the group leader, if the
test instance is a member of the group."
::= { nqaGroupEntry 4 }
nqaGroupMemberNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the number of member in the group."
::= { nqaGroupEntry 5 }
nqaGroupMemberFree OBJECT-TYPE
SYNTAX EnableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Free all members in the group."
::= { nqaGroupEntry 6 }
nqaServer OBJECT IDENTIFIER ::= { nqa 3 }
nqaServerEnable OBJECT-TYPE
SYNTAX EnableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables NQA server, which can be the echo server of TCP,
UDP and jitter type test instance."
::= { nqaServer 1 }
nqaTcpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaTcpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which contains the status of nqa tcp server
configuration information."
::= { nqaServer 2 }
nqaTcpServerEntry OBJECT-TYPE
SYNTAX NqaTcpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which contains the status of nqa tcp server
configuration information.
This entry is included not only the tcp server ip address
but also the tcp server tcp port. If used for VPN it is also
included the VPN name."
INDEX {
nqaTcpServerAddress,
nqaTcpServerPort,
nqaTcpServerVrfName
}
::= { nqaTcpServerTable 1 }
NqaTcpServerEntry ::=
SEQUENCE {
nqaTcpServerAddressType
InetAddressType,
nqaTcpServerAddress
InetAddress,
nqaTcpServerPort
InetPortNumber,
nqaTcpServerVrfName
DisplayString,
nqaTcpServerStatus
RowStatus
}
nqaTcpServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the address type of TCP server."
DEFVAL { unknown }
::= { nqaTcpServerEntry 1 }
nqaTcpServerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the address of TCP server."
::= { nqaTcpServerEntry 2 }
nqaTcpServerPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the port number on which TCP server is listening."
::= { nqaTcpServerEntry 3 }
nqaTcpServerVrfName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the VRF (VPN Routing & Forwarding) instances name
of the TCP server."
::= { nqaTcpServerEntry 4 }
nqaTcpServerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the operation of the TCP server, creating or deleting."
REFERENCE
"See definition of RowStatus in RFC 2579, 'Textual
Conventions for SMIv2.'"
::= { nqaTcpServerEntry 5 }
nqaUdpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaUdpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which contains the status of nqa udp server
configuration information."
::= { nqaServer 3 }
nqaUdpServerEntry OBJECT-TYPE
SYNTAX NqaUdpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which contains the status of nqa udp server
configuration information.
This entry is includeed not only the udp server ip address
but also the udp server udp port.If used for VPN it is also
included the VPN name."
INDEX {
nqaUdpServerAddress,
nqaUdpServerPort,
nqaUdpServerVrfName
}
::= { nqaUdpServerTable 1 }
NqaUdpServerEntry ::=
SEQUENCE {
nqaUdpServerAddressType
InetAddressType,
nqaUdpServerAddress
InetAddress,
nqaUdpServerPort
InetPortNumber,
nqaUdpServerVrfName
DisplayString,
nqaUdpServerStatus
RowStatus
}
nqaUdpServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the address type of UDP server."
DEFVAL { unknown }
::= { nqaUdpServerEntry 1 }
nqaUdpServerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the address of UDP server."
::= { nqaUdpServerEntry 2 }
nqaUdpServerPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the port number on which UDP server is listening."
::= { nqaUdpServerEntry 3 }
nqaUdpServerVrfName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the VRF (VPN Routing & Forwarding) instances name
of the UDP server."
::= { nqaUdpServerEntry 4 }
nqaUdpServerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the operation of the UDP server, creating or deleting."
REFERENCE
"See definition of RowStatus in RFC 2579, 'Textual
Conventions for SMIv2.'"
::= { nqaUdpServerEntry 5 }
nqaIcmpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaIcmpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which contains the status of nqa ICMP server
configuration information."
::= { nqaServer 4 }
nqaIcmpServerEntry OBJECT-TYPE
SYNTAX NqaIcmpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which contains the status of nqa ICMP server
configuration information.
This entry is included the ICMP server IP address.
If used for VPN it is also included the VPN name."
INDEX {
nqaIcmpServerAddress,
nqaIcmpServerVrfName
}
::= { nqaIcmpServerTable 1 }
NqaIcmpServerEntry ::=
SEQUENCE {
nqaIcmpServerAddress
InetAddress,
nqaIcmpServerVrfName
DisplayString,
nqaIcmpServerAddressType
InetAddressType,
nqaIcmpServerStatus
RowStatus
}
nqaIcmpServerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the address of ICMP server."
::= { nqaIcmpServerEntry 1 }
nqaIcmpServerVrfName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the VRF (VPN Routing & Forwarding) instances name
of the ICMP server."
::= { nqaIcmpServerEntry 2 }
nqaIcmpServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the address type of ICMP server."
DEFVAL { unknown }
::= { nqaIcmpServerEntry 3 }
nqaIcmpServerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the operation of the ICMP server, creating or deleting."
REFERENCE
"See definition of RowStatus in RFC 2579, 'Textual
Conventions for SMIv2.'"
::= { nqaIcmpServerEntry 51 }
nqaStats OBJECT IDENTIFIER ::= { nqa 4 }
nqaResultsTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaResultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the test Results Extend Table for providing
the capability of performing test operations at
a remote host. The results of these operations are
stored in the nqaResultsTable . The operation of this
table is same as that of nqaResultsTable."
::= { nqaStats 1 }
nqaResultsEntry OBJECT-TYPE
SYNTAX NqaResultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The operation of this table is same as that of nqaResultsTable."
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaResultsIndex, nqaResultsHopIndex }
::= { nqaResultsTable 1 }
NqaResultsEntry ::=
SEQUENCE {
nqaResultsIndex
Integer32,
nqaResultsHopIndex
Integer32,
nqaResultsCompletions
INTEGER,
nqaResultsTestAttempts
Counter32,
nqaResultsCurHopCount
Gauge32,
nqaResultsCurProbeCount
Gauge32,
nqaResultsRTDOverThresholds
Counter32,
nqaResultsSumCompletionTime
Counter32,
nqaResultsSumCompletionTime2Low
Counter32,
nqaResultsSumCompletionTime2High
Counter32,
nqaResultsCompletionTimeMin
Gauge32,
nqaResultsCompletionTimeMax
Gauge32,
nqaResultsDisconnects
Counter32,
nqaResultsTimeouts
Counter32,
nqaResultsBusies
Counter32,
nqaResultsNoConnections
Counter32,
nqaResultsSequenceErrors
Counter32,
nqaResultsDrops
Counter32,
nqaResultsAddressType
InetAddressType,
nqaResultsAddress
InetAddress,
nqaResultsProbeResponses
Counter32,
nqaResultsSentProbes
Counter32,
nqaResultsLastGoodProbe
DateAndTime,
nqaResultsLastGoodPath
DateAndTime,
nqaResultsTestFinished
INTEGER ,
nqaResultsRttAvg
Gauge32,
nqaResultsLostPacketRatio
Gauge32
}
nqaResultsIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7FFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The result table index and times of dispatching dependency tests.
Each test can only reserve 5 records. The result table only contains
icmp/dns/dlsw/lspPing/Traceroute/LSP Traceroute/tcp/udp/snmp/dhcp Traceroute information. "
::= { nqaResultsEntry 1 }
nqaResultsHopIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The hop index. If the test type is Traceroute or LSP Traceroute,
the entry only defines one hop. For other types, the default value is 1."
::= { nqaResultsEntry 2 }
nqaResultsCompletions OBJECT-TYPE
SYNTAX INTEGER
{
noResult(0),
success(1),
failure(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of test."
::= { nqaResultsEntry 3 }
nqaResultsTestAttempts OBJECT-TYPE
SYNTAX Counter32
UNITS "tests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times of executing tests, which includes the times of successful execution,
failed execution and interruption (interrupted by human or system).
The current number of test attempts. The value of this object MUST be started at 0."
::= { nqaResultsEntry 4 }
nqaResultsCurHopCount OBJECT-TYPE
SYNTAX Gauge32
UNITS "hops"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is equal to the hop count index executed
by current Traceroute or LSP Traceroute tests.
Ping/LSP Ping does not use this entry. The default value is 0."
::= { nqaResultsEntry 5 }
nqaResultsCurProbeCount OBJECT-TYPE
SYNTAX Gauge32
UNITS "probes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of probe packets of Traceroute
or LSP Traceroute test in a hop count index."
::= { nqaResultsEntry 6 }
nqaResultsRTDOverThresholds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times of successful statistics test RTD (Round Trip Delay)
over the threshold."
::= { nqaResultsEntry 7 }
nqaResultsSumCompletionTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of RTT (response time) of all packets of each hop for executing Traceroute,
LSP Traceroute tests. The sum of RTT (response time) of sent packets for executing ping,
lsp ping and disman-ping tests and so on."
::= { nqaResultsEntry 8 }
nqaResultsSumCompletionTime2Low OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The low order 32 bits of the accumulated squares
of completion times (in milliseconds) of NQA
operations which complete successfully.
Low/High order is defined where the binary number
will look as follows:
-------------------------------------------------
| High order 32 bits | Low order 32 bits |
-------------------------------------------------
For example the number 4294967296 would have all
Low order bits as '0' and the rightmost High
order bit will be 1 (zeros,1).
"
::= { nqaResultsEntry 9 }
nqaResultsSumCompletionTime2High OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high order 32 bits of the accumulated squares
of completion times (in milliseconds) of NQA
operations which complete successfully.
See the nqaResultsSumCompletionTime2Low object
for a definition of Low/High Order.
"
::= { nqaResultsEntry 10 }
nqaResultsCompletionTimeMin OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum RTT (for Traceroute and LSP Traceroute,
it is the minimum RTT among all the packet of next hop) of all packets for executing a test. "
::= { nqaResultsEntry 11 }
nqaResultsCompletionTimeMax OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum RTT (for Traceroute and LSP Traceroute,
it is the maximum RTT among all the packets of next hop) of all packets in executing a test."
::= { nqaResultsEntry 12 }
nqaResultsDisconnects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times of consecutive failures. For connectionless protocol type of test,this number should be zero."
::= { nqaResultsEntry 13 }
nqaResultsTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when a NQA operation was not
completed before a timeout occurred, i.e.
nqaAdminCtrlTimeOut was exceeded."
::= { nqaResultsEntry 14 }
nqaResultsBusies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times of failure to apply resource due to the busy system.
such as apply memory or create socket failure."
::= { nqaResultsEntry 15 }
nqaResultsNoConnections OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when a NQA operation could not be
initiated because the connection to the target has not
been established. For all other nqaAdminCtrlType this
object will remain zero.
This cannot occur for connectionless protocols, but may
occur for connection oriented protocols, such as TCP.
Since a NQA operation was never initiated, the completion
time of these operations are not accumulated, nor do they
increment nqaResultsCompletions.
"
::= { nqaResultsEntry 16 }
nqaResultsSequenceErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of NQA operation completions received with
an unexpected sequence identifier. For all other values
of nqaAdminCtrlType this object will remain zero.
When this has occurred some of the possible reasons maybe:
- a duplicate packet was received
- a response was received after it had timed-out
- a corrupted packet was received and was not detected
"
::= { nqaResultsEntry 17 }
nqaResultsDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times probes of the test dropped due to sending or connecting failure."
::= { nqaResultsEntry 18 }
nqaResultsAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination address type, and the value range can be unknown(0),
ipv4(1) and dns(16)."
::= { nqaResultsEntry 19 }
nqaResultsAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination address (TraceRoute is the destination address of each hop,
and ping is the destination address of tests)."
::= { nqaResultsEntry 20 }
nqaResultsProbeResponses OBJECT-TYPE
SYNTAX Counter32
UNITS "responses"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of responses received for the corresponding
test. The value of this object
MUST be reported as 0 when no probe responses have been
received."
::= { nqaResultsEntry 21 }
nqaResultsSentProbes OBJECT-TYPE
SYNTAX Counter32
UNITS "probes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object reflects the number of probes sent
for the corresponding test.
The value of this object MUST be reported as 0 when no probes
have been sent."
::= { nqaResultsEntry 22 }
nqaResultsLastGoodProbe OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date and time when the last response was received for a probe."
::= { nqaResultsEntry 23 }
nqaResultsLastGoodPath OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time when the last complete path was determined."
::= { nqaResultsEntry 24 }
nqaResultsTestFinished OBJECT-TYPE
SYNTAX INTEGER
{
noFinish(0),
finish(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of test execution."
::= { nqaResultsEntry 25 }
nqaResultsRttAvg OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of RTTs that were successfully measured by tests."
::= { nqaResultsEntry 26}
nqaResultsLostPacketRatio OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ratio of the packets lost to all packets sent in the test."
::= { nqaResultsEntry 27 }
nqaHTTPStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaHTTPStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The statistics collection database.
Defines the HTTP Operations Statistics Table for
storing the statistics of a HTTP test."
::= { nqaStats 2 }
nqaHTTPStatsEntry OBJECT-TYPE
SYNTAX NqaHTTPStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the nqaHTTPStatsTable."
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaHTTPStatsIndex }
::= { nqaHTTPStatsTable 1 }
NqaHTTPStatsEntry ::=
SEQUENCE {
nqaHTTPStatsIndex
Integer32,
nqaHTTPStatsCompletions
INTEGER,
nqaHTTPStatsRTDOverThresholds
Counter32,
nqaHTTPStatsRTTSum
Counter32,
nqaHTTPStatsRTTMin
Gauge32,
nqaHTTPStatsRTTMax
Gauge32,
nqaHTTPStatsDNSRTTSum
Counter32,
nqaHTTPStatsDNSRTTMin
Gauge32,
nqaHTTPStatsDNSRTTMax
Gauge32,
nqaHTTPStatsTCPConnectRTTSum
Counter32,
nqaHTTPStatsTCPConnectRTTMin
Gauge32,
nqaHTTPStatsTCPConnectRTTMax
Gauge32,
nqaHTTPStatsTransactionRTTSum
Counter32,
nqaHTTPStatsTransactionRTTMin
Gauge32,
nqaHTTPStatsTransactionRTTMax
Gauge32,
nqaHTTPStatsMessageBodyOctetsSum
Counter32,
nqaHTTPStatsDNSServerTimeouts
Counter32,
nqaHTTPStatsTCPConnectTimeouts
Counter32,
nqaHTTPStatsTransactionTimeouts
Counter32,
nqaHTTPStatsDNSQueryErrors
Counter32,
nqaHTTPStatsErrors
Counter32,
nqaHTTPStatsTcpConnErrors
Counter32,
nqaHTTPStatsProbeResponses
Counter32,
nqaHTTPStatsSendProbes
Counter32,
nqaHTTPStatsBusies
Counter32,
nqaHTTPStatsTestFinished
INTEGER,
nqaHTTPStatsRttAvg
Gauge32,
nqaHTTPStatsLostPacketRatio
Gauge32
}
nqaHTTPStatsIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7FFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The The HTTP statistics table index and times of dispatching dependency tests."
::= { nqaHTTPStatsEntry 1 }
nqaHTTPStatsCompletions OBJECT-TYPE
SYNTAX INTEGER
{
noResult(0),
success(1),
failure(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of HTTP test."
::= { nqaHTTPStatsEntry 2 }
nqaHTTPStatsRTDOverThresholds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of HTTP operations RTD (Round Trip Delay) that violate threshold."
::= { nqaHTTPStatsEntry 3 }
nqaHTTPStatsRTTSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of delay time of successful HTTP probes, including the sum of time of DNS query,
TCP establishment and packets transmission."
::= { nqaHTTPStatsEntry 4 }
nqaHTTPStatsRTTMin OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value of HTTP probe time."
::= { nqaHTTPStatsEntry 5 }
nqaHTTPStatsRTTMax OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value of HTTP probe time."
::= { nqaHTTPStatsEntry 6 }
nqaHTTPStatsDNSRTTSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of DNS query time."
::= { nqaHTTPStatsEntry 7 }
nqaHTTPStatsDNSRTTMin OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of DNS query time."
::= { nqaHTTPStatsEntry 8 }
nqaHTTPStatsDNSRTTMax OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of DNS query time."
::= { nqaHTTPStatsEntry 9 }
nqaHTTPStatsTCPConnectRTTSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of TCP connection time."
::= { nqaHTTPStatsEntry 10 }
nqaHTTPStatsTCPConnectRTTMin OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value of TCP connection time."
::= { nqaHTTPStatsEntry 11 }
nqaHTTPStatsTCPConnectRTTMax OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value of TCP connection time."
::= { nqaHTTPStatsEntry 12 }
nqaHTTPStatsTransactionRTTSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of transaction time."
::= { nqaHTTPStatsEntry 13 }
nqaHTTPStatsTransactionRTTMin OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value of transaction time."
::= { nqaHTTPStatsEntry 14 }
nqaHTTPStatsTransactionRTTMax OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value of transaction time."
::= { nqaHTTPStatsEntry 15 }
nqaHTTPStatsMessageBodyOctetsSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the size of the message body received as a
response to the HTTP request."
::= { nqaHTTPStatsEntry 16 }
nqaHTTPStatsDNSServerTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that timed out during DNS query."
::= { nqaHTTPStatsEntry 17 }
nqaHTTPStatsTCPConnectTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that timed out during HTTP connection."
::= { nqaHTTPStatsEntry 18 }
nqaHTTPStatsTransactionTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that timed out during HTTP transaction."
::= { nqaHTTPStatsEntry 19 }
nqaHTTPStatsDNSQueryErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that had DNS query errors."
::= { nqaHTTPStatsEntry 20 }
nqaHTTPStatsErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of HTTP transaction failures."
::= { nqaHTTPStatsEntry 21 }
nqaHTTPStatsTcpConnErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of TCP connection failures."
::= { nqaHTTPStatsEntry 22 }
nqaHTTPStatsProbeResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of responses received for the corresponding test. The value of this object
MUST be reported as 0 when no probe responses have been received."
::= { nqaHTTPStatsEntry 23 }
nqaHTTPStatsSendProbes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sending probes."
::= { nqaHTTPStatsEntry 24 }
nqaHTTPStatsBusies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when a HTTP operation could not
be initiated because an internal error."
::= { nqaHTTPStatsEntry 25 }
nqaHTTPStatsTestFinished OBJECT-TYPE
SYNTAX INTEGER
{
noFinish(0),
finish(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of test execution."
::= { nqaHTTPStatsEntry 26 }
nqaHTTPStatsRttAvg OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of RTTs that were successfully measured by tests."
::= { nqaHTTPStatsEntry 27}
nqaHTTPStatsLostPacketRatio OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ratio of the packets lost to all packets sent in the test."
::= { nqaHTTPStatsEntry 28 }
nqaJitterStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaJitterStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which contains the status of latest Jitter operation."
::= { nqaStats 3 }
nqaJitterStatsEntry OBJECT-TYPE
SYNTAX NqaJitterStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which contains the status of latest Jitter operation.
This entry is created only if the nqaAdminCtrlType is jitterAppl."
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaJitterStatsIndex }
::= { nqaJitterStatsTable 1 }
NqaJitterStatsEntry ::=
SEQUENCE {
nqaJitterStatsIndex
Integer32,
nqaJitterStatsCompletions
INTEGER,
nqaJitterStatsRTDOverThresholds
Counter32,
nqaJitterStatsNumOfRTT
Counter32,
nqaJitterStatsRTTSum
Counter32,
nqaJitterStatsRTTSum2Low
Counter32,
nqaJitterStatsRTTSum2High
Counter32,
nqaJitterStatsRTTMin
Gauge32,
nqaJitterStatsRTTMax
Gauge32,
nqaJitterStatsMinOfPositivesSD
Gauge32,
nqaJitterStatsMaxOfPositivesSD
Gauge32,
nqaJitterStatsNumOfPositivesSD
Counter32,
nqaJitterStatsSumOfPositivesSD
Counter32,
nqaJitterStatsSum2OfPositivesSDLow
Counter32,
nqaJitterStatsSum2OfPositivesSDHigh
Counter32,
nqaJitterStatsMinOfNegativesSD
Gauge32,
nqaJitterStatsMaxOfNegativesSD
Gauge32,
nqaJitterStatsNumOfNegativesSD
Counter32,
nqaJitterStatsSumOfNegativesSD
Counter32,
nqaJitterStatsSum2OfNegativesSDLow
Counter32,
nqaJitterStatsSum2OfNegativesSDHigh
Counter32,
nqaJitterStatsMinOfPositivesDS
Gauge32,
nqaJitterStatsMaxOfPositivesDS
Gauge32,
nqaJitterStatsNumOfPositivesDS
Counter32,
nqaJitterStatsSumOfPositivesDS
Counter32,
nqaJitterStatsSum2OfPositivesDSLow
Counter32,
nqaJitterStatsSum2OfPositivesDSHigh
Counter32,
nqaJitterStatsMinOfNegativesDS
Gauge32,
nqaJitterStatsMaxOfNegativesDS
Gauge32,
nqaJitterStatsNumOfNegativesDS
Counter32,
nqaJitterStatsSumOfNegativesDS
Counter32,
nqaJitterStatsSum2OfNegativesDSLow
Counter32,
nqaJitterStatsSum2OfNegativesDSHigh
Counter32,
nqaJitterStatsPacketLossSD
Counter32,
nqaJitterStatsPacketLossDS
Counter32,
nqaJitterStatsPacketOutOfSequences
Counter32,
nqaJitterStatsErrors
Counter32,
nqaJitterStatsBusies
Counter32,
nqaJitterStatsTimeouts
Counter32,
nqaJitterStatsProbeResponses
Counter32,
nqaJitterStatsSentProbes
Counter32,
nqaJitterStatsDrops
Counter32,
nqaJitterStatsTestFinished
INTEGER,
nqaJitterStatsMaxDelaySD
Gauge32,
nqaJitterStatsMaxDelayDS
Gauge32,
nqaJitterStatsRTTAvg
Gauge32,
nqaJitterStatsPacketLossRatio
Gauge32,
nqaJitterStatsAvgJitter
Gauge32,
nqaJitterStatsAvgJitterSD
Gauge32,
nqaJitterStatsAvgJitterDS
Gauge32,
nqaJitterStatsJitterOut
OCTET STRING,
nqaJitterStatsJitterIn
OCTET STRING,
nqaJitterStatsOWDOverThresholdsSD
Counter32,
nqaJitterStatsPktLossUnknown
Counter32,
nqaJitterStatsNumOfOWD
Counter32,
nqaJitterStatsOWSumSD
Counter32,
nqaJitterStatsOWSumDS
Counter32,
nqaJitterStatsOWDOverThresholdsDS
Counter32,
nqaJitterStatsOperOfIcpif
Gauge32,
nqaJitterStatsOperOfMos
Gauge32,
nqaJitterStatsMinDelaySD
Gauge32,
nqaJitterStatsSum2DelaySDLow
Gauge32,
nqaJitterStatsSum2DelaySDHigh
Counter32,
nqaJitterStatsMinDelayDS
Gauge32,
nqaJitterStatsSum2DelayDSLow
Gauge32,
nqaJitterStatsSum2DelayDSHigh
Counter32,
nqaJitterStatsTimeUnit
INTEGER,
nqaJitterStatsAvgDelaySD
Gauge32,
nqaJitterStatsAvgDelayDS
Gauge32,
nqaJitterStatsPktRewriteNum
Counter32,
nqaJitterStatsPktRewriteRatio
Gauge32,
nqaJitterStatsPktDisorderNum
Counter32,
nqaJitterStatsPktDisorderRatio
Gauge32,
nqaJitterStatsFragPktDisorderNum
Counter32,
nqaJitterStatsFragPktDisorderRatio
Gauge32
}
nqaJitterStatsIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7FFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The third index of jitter statistics table."
::= { nqaJitterStatsEntry 1 }
nqaJitterStatsCompletions OBJECT-TYPE
SYNTAX INTEGER
{
noResult(0),
success(1),
failure(2),
negotiateFailed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the test, which value can be noResult (0),
success (1), failure (2) or negotiateFailed (3). If the test is still running,
the value will be noResult (0)."
::= { nqaJitterStatsEntry 2 }
nqaJitterStatsRTDOverThresholds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tests that violate RTD (Round Trip Delay) threshold."
::= { nqaJitterStatsEntry 3 }
nqaJitterStatsNumOfRTT OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RTTs that are successfully measured by tests."
::= { nqaJitterStatsEntry 4 }
nqaJitterStatsRTTSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of RTTs that are successfully measured."
::= { nqaJitterStatsEntry 5 }
nqaJitterStatsRTTSum2Low OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of RTTs that are successfully measured by
tests (low order 32 bits)."
::= { nqaJitterStatsEntry 6 }
nqaJitterStatsRTTSum2High OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of RTTs that are successfully measured by
tests (high order 32 bits)."
::= { nqaJitterStatsEntry 7 }
nqaJitterStatsRTTMin OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of RTTs that were successfully measured by tests."
::= { nqaJitterStatsEntry 8 }
nqaJitterStatsRTTMax OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of RTTs that were successfully measured by tests."
::= { nqaJitterStatsEntry 9 }
nqaJitterStatsMinOfPositivesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of absolute value of all positive jitter values from source to destination."
::= { nqaJitterStatsEntry 10 }
nqaJitterStatsMaxOfPositivesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of absolute value of all positive jitter values from source to destination."
::= { nqaJitterStatsEntry 11 }
nqaJitterStatsNumOfPositivesSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all positive jitter values from source to destination."
::= { nqaJitterStatsEntry 12 }
nqaJitterStatsSumOfPositivesSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of absolute value of all positive jitter values from source to destination."
::= { nqaJitterStatsEntry 13 }
nqaJitterStatsSum2OfPositivesSDLow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of absolute value of all positive jitter values
from source to destination (low order 32 bits)."
::= { nqaJitterStatsEntry 14 }
nqaJitterStatsSum2OfPositivesSDHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of absolute value of all positive jitter values
from source to destination (high order 32 bits)."
::= { nqaJitterStatsEntry 15 }
nqaJitterStatsMinOfNegativesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of absolute value of all negative jitter values from
source to destination."
::= { nqaJitterStatsEntry 16 }
nqaJitterStatsMaxOfNegativesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of absolute value of all negative jitter values from
source to destination."
::= { nqaJitterStatsEntry 17 }
nqaJitterStatsNumOfNegativesSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all negative jitter values from source to destination."
::= { nqaJitterStatsEntry 18 }
nqaJitterStatsSumOfNegativesSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of absolute value of all negative jitter values from source
to destination."
::= { nqaJitterStatsEntry 19 }
nqaJitterStatsSum2OfNegativesSDLow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of absolute value of all negative values from source
to destination (low order 32 bits)."
::= { nqaJitterStatsEntry 20 }
nqaJitterStatsSum2OfNegativesSDHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of absolute value of all negative values from source to
destination (high order 32 bits)."
::= { nqaJitterStatsEntry 21 }
nqaJitterStatsMinOfPositivesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of absolute value of all positive jitter values from destination
to source."
::= { nqaJitterStatsEntry 22 }
nqaJitterStatsMaxOfPositivesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of absolute value of all positive jitter values from destination
to source."
::= { nqaJitterStatsEntry 23 }
nqaJitterStatsNumOfPositivesDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all positive jitter values from destination to source."
::= { nqaJitterStatsEntry 24 }
nqaJitterStatsSumOfPositivesDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of absolute value of all positive jitter values from destination
to source."
::= { nqaJitterStatsEntry 25 }
nqaJitterStatsSum2OfPositivesDSLow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of absolute value of all positive jitter values from
destination to source (low order 32 bits)."
::= { nqaJitterStatsEntry 26 }
nqaJitterStatsSum2OfPositivesDSHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of absolute value of all positive jitter values from
destination to source (high order 32 bits)."
::= { nqaJitterStatsEntry 27 }
nqaJitterStatsMinOfNegativesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of absolute value of all negative jitter values from
destination to source."
::= { nqaJitterStatsEntry 28 }
nqaJitterStatsMaxOfNegativesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of absolute value of all negative jitter values from
destination to source."
::= { nqaJitterStatsEntry 29 }
nqaJitterStatsNumOfNegativesDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all negative jitter values from destination to source."
::= { nqaJitterStatsEntry 30 }
nqaJitterStatsSumOfNegativesDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of absolute value of all negative jitter values from destination
to source."
::= { nqaJitterStatsEntry 31 }
nqaJitterStatsSum2OfNegativesDSLow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of absolute value of all negative values from destination
to source (low order 32 bits)."
::= { nqaJitterStatsEntry 32 }
nqaJitterStatsSum2OfNegativesDSHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of absolute value of all negative values from destination
to source (high order 32 bits)."
::= { nqaJitterStatsEntry 33 }
nqaJitterStatsPacketLossSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets lost when sent from source to destination."
::= { nqaJitterStatsEntry 34 }
nqaJitterStatsPacketLossDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets lost when sent from destination to source."
::= { nqaJitterStatsEntry 35 }
nqaJitterStatsPacketOutOfSequences OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets arrived out of sequence."
::= { nqaJitterStatsEntry 36 }
nqaJitterStatsErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of errors occurred in the test."
::= { nqaJitterStatsEntry 37 }
nqaJitterStatsBusies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when a test couldn't be initialized
because the previous test has not completed."
::= { nqaJitterStatsEntry 38 }
nqaJitterStatsTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of responses arrived over the time."
::= { nqaJitterStatsEntry 39 }
nqaJitterStatsProbeResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of responses from echo-server for the packets sent
by the test."
::= { nqaJitterStatsEntry 40 }
nqaJitterStatsSentProbes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets sent in the test."
::= { nqaJitterStatsEntry 41 }
nqaJitterStatsDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that were sent failed in the test."
::= { nqaJitterStatsEntry 42 }
nqaJitterStatsTestFinished OBJECT-TYPE
SYNTAX INTEGER
{
noFinish(0),
finish(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the test, which value can be noFinish (0) or finish (1)."
::= { nqaJitterStatsEntry 43 }
nqaJitterStatsMaxDelaySD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all OWD (One Way Delay) from source to destination."
::= { nqaJitterStatsEntry 44 }
nqaJitterStatsMaxDelayDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all OWD (One Way Delay) from destination to source."
::= { nqaJitterStatsEntry 45 }
nqaJitterStatsRTTAvg OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of RTTs that were successfully measured by tests."
::= { nqaJitterStatsEntry 46 }
nqaJitterStatsPacketLossRatio OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ratio of the packets lost to all packets sent in the test."
::= { nqaJitterStatsEntry 47 }
nqaJitterStatsAvgJitter OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of jitter values that were successfully measured by tests."
::= { nqaJitterStatsEntry 48 }
nqaJitterStatsAvgJitterSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of jitter values from source to destination that were
successfully measured by tests."
::= { nqaJitterStatsEntry 49 }
nqaJitterStatsAvgJitterDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of jitter values from destination to source that were
successfully measured by tests."
::= { nqaJitterStatsEntry 50 }
nqaJitterStatsJitterOut OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Jitter (RFC1889) at responder."
::= { nqaJitterStatsEntry 51 }
nqaJitterStatsJitterIn OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Jitter (RFC1889) at sender."
::= { nqaJitterStatsEntry 52 }
nqaJitterStatsOWDOverThresholdsSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tests that violate OWD (One Way Delay) threshold from
source to destination."
::= { nqaJitterStatsEntry 53 }
nqaJitterStatsPktLossUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets lost for which we can't determine the direction."
::= { nqaJitterStatsEntry 54 }
nqaJitterStatsNumOfOWD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OWDs that were successfully measured by tests."
::= { nqaJitterStatsEntry 55 }
nqaJitterStatsOWSumSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of OWDs that were successfully measured by tests from source
to destination."
::= { nqaJitterStatsEntry 56 }
nqaJitterStatsOWSumDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of OWDs that were successfully measured by tests from
destination to source."
::= { nqaJitterStatsEntry 57 }
nqaJitterStatsOWDOverThresholdsDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tests that violate OWD (One Way Delay) threshold
from destination to source."
::= { nqaJitterStatsEntry 58 }
nqaJitterStatsOperOfIcpif OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ICPIF (Calculated Planning Impairment Factor) value for the latest
jitter test."
::= { nqaJitterStatsEntry 59 }
nqaJitterStatsOperOfMos OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MOS (Mean Opinion Score) value for the latest jitter test. "
::= { nqaJitterStatsEntry 60}
nqaJitterStatsMinDelaySD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all one way time from source to destination."
::= { nqaJitterStatsEntry 61 }
nqaJitterStatsSum2DelaySDLow OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The low order 32 bits of the sum of squares of one way
time from source to destination."
::= { nqaJitterStatsEntry 62 }
nqaJitterStatsSum2DelaySDHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high order 32 bits of the sum of squares of one
way time from source to destination."
::= { nqaJitterStatsEntry 63 }
nqaJitterStatsMinDelayDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all one way time from destination to source."
::= { nqaJitterStatsEntry 64 }
nqaJitterStatsSum2DelayDSLow OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The low order 32 bits of the sum of squares of one way time
from destination to source."
::= { nqaJitterStatsEntry 65 }
nqaJitterStatsSum2DelayDSHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The low order 32 bits of the sum of squares of one way time from destination to source."
::= { nqaJitterStatsEntry 66 }
nqaJitterStatsTimeUnit OBJECT-TYPE
SYNTAX INTEGER
{
us(1), -- The unit of the timestamp is us
ms(2) -- The unit of the timestamp is ms
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit of the timestamp, ms or us."
::= { nqaJitterStatsEntry 67 }
nqaJitterStatsAvgDelaySD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of one way time from source to destination."
::= { nqaJitterStatsEntry 68 }
nqaJitterStatsAvgDelayDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of one way time from destination to source."
::= { nqaJitterStatsEntry 69 }
nqaJitterStatsPktRewriteNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets have been rewrited."
::= { nqaJitterStatsEntry 70 }
nqaJitterStatsPktRewriteRatio OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ratio of packets have been rewrited."
::= { nqaJitterStatsEntry 71 }
nqaJitterStatsPktDisorderNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets have been disordered."
::= { nqaJitterStatsEntry 72 }
nqaJitterStatsPktDisorderRatio OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ratio of packets have been disordered."
::= { nqaJitterStatsEntry 73 }
nqaJitterStatsFragPktDisorderNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets whose fragments have been disordered."
::= { nqaJitterStatsEntry 74 }
nqaJitterStatsFragPktDisorderRatio OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ratio of packets whose fragments have been disordered."
::= { nqaJitterStatsEntry 75 }
nqaFTPStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaFTPStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The statistics collection database.
Defines the FTP Operations Statistics Table for
storing the statistics of a FTP test.
"
::= { nqaStats 4 }
nqaFTPStatsEntry OBJECT-TYPE
SYNTAX NqaFTPStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the nqaFTPStatsTable. "
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaFTPStatsIndex }
::= { nqaFTPStatsTable 1 }
NqaFTPStatsEntry ::=
SEQUENCE {
nqaFTPStatsIndex
Integer32,
nqaFTPStatsCompletions
INTEGER,
nqaFTPStatsRTDOverThresholds
Counter32,
nqaFTPStatsCtrlConnMaxTime
Gauge32,
nqaFTPStatsCtrlConnMinTime
Gauge32,
nqaFTPStatsCtrlConnAveTime
Gauge32,
nqaFTPStatsDataConnMaxTime
Gauge32,
nqaFTPStatsDataConnMinTime
Gauge32,
nqaFTPStatsDataConnAveTime
Gauge32,
nqaFTPStatsConnectSumTimeMax
Gauge32,
nqaFTPStatsConnectSumTimeMin
Gauge32,
nqaFTPStatsConnectSumTimeAve
Gauge32,
nqaFTPStatsMessageBodyOctetsSum
Counter32,
nqaFTPStatsErrors
Counter32,
nqaFTPStatsTimeouts
Counter32,
nqaFTPStatsDiscontinued
Counter32,
nqaFTPStatsProbeResponses
Counter32,
nqaFTPStatsSendProbes
Counter32,
nqaFTPStatsTestFinished
INTEGER,
nqaFTPStatsRttAvg
Gauge32,
nqaFTPStatsLostPacketRatio
Gauge32
}
nqaFTPStatsIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7FFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"FTP statistics table index and times of dispatching dependency tests."
::= { nqaFTPStatsEntry 1 }
nqaFTPStatsCompletions OBJECT-TYPE
SYNTAX INTEGER
{
noResult(0),
success(1),
failure(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of FTP test."
::= { nqaFTPStatsEntry 2 }
nqaFTPStatsRTDOverThresholds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times of successful statistics test RTD (Round Trip Delay) over the threshold."
::= { nqaFTPStatsEntry 3 }
nqaFTPStatsCtrlConnMaxTime OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value of the control connection time."
::= { nqaFTPStatsEntry 4 }
nqaFTPStatsCtrlConnMinTime OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value of the control connection time."
::= { nqaFTPStatsEntry 5 }
nqaFTPStatsCtrlConnAveTime OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average value of the control connection time."
::= { nqaFTPStatsEntry 6 }
nqaFTPStatsDataConnMaxTime OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value of the data connection time."
::= { nqaFTPStatsEntry 7 }
nqaFTPStatsDataConnMinTime OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum value of the data connection time."
::= { nqaFTPStatsEntry 8 }
nqaFTPStatsDataConnAveTime OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average value of the data connection time."
::= { nqaFTPStatsEntry 9 }
nqaFTPStatsConnectSumTimeMax OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value of the FTP probe time."
::= { nqaFTPStatsEntry 10 }
nqaFTPStatsConnectSumTimeMin OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mininum value of the FTP probe time."
::= { nqaFTPStatsEntry 11 }
nqaFTPStatsConnectSumTimeAve OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average value of the FTP probe time."
::= { nqaFTPStatsEntry 12 }
nqaFTPStatsMessageBodyOctetsSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The accumulated octets of a FTP test."
::= { nqaFTPStatsEntry 13 }
nqaFTPStatsErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of some other errors."
::= { nqaFTPStatsEntry 14 }
nqaFTPStatsTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when a FTP operation was not
completed before a timeout occurred, i.e.
nqaAdminCtrlTimeOut was exceeded."
::= { nqaFTPStatsEntry 15 }
nqaFTPStatsDiscontinued OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when a FTP test was interrupted by the user."
::= { nqaFTPStatsEntry 16 }
nqaFTPStatsProbeResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of responses received for the corresponding test. The value of this object
MUST be reported as 0 when no probe responses have been received."
::= { nqaFTPStatsEntry 17 }
nqaFTPStatsSendProbes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sending probe"
::= { nqaFTPStatsEntry 18 }
nqaFTPStatsTestFinished OBJECT-TYPE
SYNTAX INTEGER
{
noFinish(0),
finish(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of test execution."
::= { nqaFTPStatsEntry 19 }
nqaFTPStatsRttAvg OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of RTTs that were successfully measured by tests."
::= { nqaFTPStatsEntry 20}
nqaFTPStatsLostPacketRatio OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ratio of the packets lost to all packets sent in the test."
::= { nqaFTPStatsEntry 21 }
nqaMpingStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaMpingStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The statistics collection database.
Defines the Mping Operations Statistics Table for
storing the statistics of a Mping test."
::= { nqaStats 5 }
nqaMpingStatsEntry OBJECT-TYPE
SYNTAX NqaMpingStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the nqaMpingStatsTable."
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaMpingStatsIndex ,nqaMpingStatsReceiverIndex }
::= { nqaMpingStatsTable 1 }
NqaMpingStatsEntry ::=
SEQUENCE {
nqaMpingStatsIndex
Integer32,
nqaMpingStatsReceiverIndex
Integer32,
nqaMpingStatsTargetAddressType
InetAddressType,
nqaMpingStatsTargetAddress
InetAddress,
nqaMpingStatsReceiverAddress
InetAddress,
nqaMpingStatsCompletions
INTEGER,
nqaMpingStatsRTDOverThresholds
Counter32,
nqaMpingStatsSumCompletionTime
Counter32,
nqaMpingStatsSumCompletionTime2Low
Counter32,
nqaMpingStatsSumCompletionTime2High
Counter32,
nqaMpingStatsCompletionTimeMin
Gauge32,
nqaMpingStatsCompletionTimeMax
Gauge32,
nqaMpingStatsTimeouts
Counter32,
nqaMpingStatsBusies
Counter32,
nqaMpingStatsSequenceErrors
Counter32,
nqaMpingStatsDrops
Counter32,
nqaMpingStatsProbeResponses
Counter32,
nqaMpingStatsSentProbes
Counter32,
nqaMpingStatsLastGoodProbe
DateAndTime,
nqaMpingStatsTestFinished
INTEGER,
nqaMpingStatsReceiverCount
Gauge32,
nqaMpingStatsLastFibHit
TruthValue,
nqaMpingStatsRttAvg
Gauge32,
nqaMpingStatsLostPacketRatio
Gauge32
}
nqaMpingStatsIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7FFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of mping statistics table, and the times of dispatching dependency tests."
::= { nqaMpingStatsEntry 1 }
nqaMpingStatsReceiverIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7FFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of receiver ,that received the mping request packet and response the reply packet ."
::= { nqaMpingStatsEntry 2 }
nqaMpingStatsTargetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination address type, and the value range can be unknown(0),
ipv4(1) and dns(16)."
::= { nqaMpingStatsEntry 3 }
nqaMpingStatsTargetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination address ."
::= { nqaMpingStatsEntry 4 }
nqaMpingStatsReceiverAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of mping receiver"
::= { nqaMpingStatsEntry 5 }
nqaMpingStatsCompletions OBJECT-TYPE
SYNTAX INTEGER
{
noResult(1),
success(2),
failure(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of test."
::= { nqaMpingStatsEntry 6 }
nqaMpingStatsRTDOverThresholds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times of successful statistics test RTD (Round Trip Delay) over
the threshold."
::= { nqaMpingStatsEntry 7 }
nqaMpingStatsSumCompletionTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of RTT (response time) of sent packets."
::= { nqaMpingStatsEntry 8 }
nqaMpingStatsSumCompletionTime2Low OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The low order 32 bits of the sum of squares of RTT (response time)
for each packet of test execution. "
::= { nqaMpingStatsEntry 9 }
nqaMpingStatsSumCompletionTime2High OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high order 32 bits of the sum of squares
of RTT (response time) for each packet of test execution. "
::= { nqaMpingStatsEntry 10 }
nqaMpingStatsCompletionTimeMin OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum RTT of all packets for executing a test. "
::= { nqaMpingStatsEntry 11 }
nqaMpingStatsCompletionTimeMax OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum RTT of all packets in executing a test. "
::= { nqaMpingStatsEntry 12 }
nqaMpingStatsTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when a NQA operation was not completed before a timeout occurred,
i.e. nqaAdminCtrlTimeOut was exceeded."
::= { nqaMpingStatsEntry 13 }
nqaMpingStatsBusies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times of failure to apply resource due to the busy system.
such as apply memory or create socket failure."
::= { nqaMpingStatsEntry 14 }
nqaMpingStatsSequenceErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times that sequence error happends."
::= { nqaMpingStatsEntry 15 }
nqaMpingStatsDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times probes of the test dropped due to sending or connecting failure . "
::= { nqaMpingStatsEntry 16 }
nqaMpingStatsProbeResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received reponse packets."
::= { nqaMpingStatsEntry 17 }
nqaMpingStatsSentProbes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sent packets."
::= { nqaMpingStatsEntry 18 }
nqaMpingStatsLastGoodProbe OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date and time when the last response was received for a probe."
::= { nqaMpingStatsEntry 19 }
nqaMpingStatsTestFinished OBJECT-TYPE
SYNTAX INTEGER
{
noFinish(1),
finish(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of test execution."
::= { nqaMpingStatsEntry 20 }
nqaMpingStatsReceiverCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current serial number of receivers."
::= { nqaMpingStatsEntry 21 }
nqaMpingStatsLastFibHit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the fib is hit on the device when receiving the last packet."
::= {nqaMpingStatsEntry 22}
nqaMpingStatsRttAvg OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of RTTs that were successfully measured by tests."
::= { nqaMpingStatsEntry 23}
nqaMpingStatsLostPacketRatio OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ratio of the packets lost to all packets sent in the test."
::= { nqaMpingStatsEntry 24 }
nqaMtracertStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaMtracertStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The statistics collection database.
Defines the Mping Operations Statistics Table for
storing the statistics of a Mping test."
::= { nqaStats 6 }
nqaMtracertStatsEntry OBJECT-TYPE
SYNTAX NqaMtracertStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The operation of this table is same as that of nqaResultsTable."
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaMtracertStatsIndex, nqaMtracertStatsHopIndex }
::= { nqaMtracertStatsTable 1 }
NqaMtracertStatsEntry ::=
SEQUENCE {
nqaMtracertStatsIndex
Integer32,
nqaMtracertStatsHopIndex
Integer32,
nqaMtracertStatsAddressType
InetAddressType,
nqaMtracertStatsAddress
InetAddress,
nqaMtracertStatsCompletions
INTEGER,
nqaMtracertStatsCurHopCount
Gauge32,
nqaMtracertStatsCurProbeCount
Gauge32,
nqaMtracertStatsRTDOverThresholds
Counter32,
nqaMtracertStatsTimeouts
Counter32,
nqaMtracertStatsBusies
Counter32,
nqaMtracertStatsSequenceErrors
Counter32,
nqaMtracertStatsDrops
Counter32,
nqaMtracertStatsProbeResponses
Counter32,
nqaMtracertStatsSentProbes
Counter32,
nqaMtracertStatsLastGoodProbe
DateAndTime,
nqaMtracertStatsLastGoodPath
DateAndTime,
nqaMtracertStatsTestFinished
INTEGER,
nqaMtracertStatsCurPathTTL
Gauge32,
nqaMtracertStatsMaxPathTTL
Gauge32,
nqaMtracertStatsInPkgLossRate
Gauge32,
nqaMtracertStatsSGPkgLossRate
Gauge32,
nqaMtracertStatsInPkgRate
Gauge32,
nqaMtracertStatsOutPkgRate
Gauge32,
nqaMtracertStatsTimeDelay
Gauge32
}
nqaMtracertStatsIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7FFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of mping statistics table, and the times of dispatching dependency tests."
::= { nqaMtracertStatsEntry 1 }
nqaMtracertStatsHopIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of Mtracert hop "
::= { nqaMtracertStatsEntry 2 }
nqaMtracertStatsAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination address type,
and the value range can be unknown(0), ipv4(1) and dns(16)."
::= { nqaMtracertStatsEntry 3 }
nqaMtracertStatsAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination address
(TraceRoute is the source address of the last valuable response package)."
::= { nqaMtracertStatsEntry 4 }
nqaMtracertStatsCompletions OBJECT-TYPE
SYNTAX INTEGER
{
noResult(1),
success(2),
failure(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of test."
::= { nqaMtracertStatsEntry 5 }
nqaMtracertStatsCurHopCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is equal to the hop count index executed
by current tests. The default value is 0."
::= { nqaMtracertStatsEntry 6 }
nqaMtracertStatsCurProbeCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of probe packets in a hop count index."
::= { nqaMtracertStatsEntry 7 }
nqaMtracertStatsRTDOverThresholds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times of successful statistics test RTD (Round Trip Delay) over the threshold."
::= { nqaMtracertStatsEntry 8 }
nqaMtracertStatsTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when a NQA operation was not completed before a timeout occurred,
i.e. nqaAdminCtrlTimeOut was exceeded."
::= { nqaMtracertStatsEntry 9}
nqaMtracertStatsBusies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times of failure to apply resource due to the busy system.
such as apply memory or create socket failure."
::= { nqaMtracertStatsEntry 10 }
nqaMtracertStatsSequenceErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times that sequence error happends."
::= { nqaMtracertStatsEntry 11 }
nqaMtracertStatsDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times probes of the test dropped due to sending or connecting failure . "
::= { nqaMtracertStatsEntry 12 }
nqaMtracertStatsProbeResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received reponse packets."
::= { nqaMtracertStatsEntry 13 }
nqaMtracertStatsSentProbes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sent packets."
::= { nqaMtracertStatsEntry 14 }
nqaMtracertStatsLastGoodProbe OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date and time when the last response was received for a probe."
::= { nqaMtracertStatsEntry 15 }
nqaMtracertStatsLastGoodPath OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time when the last complete path was determined."
::= { nqaMtracertStatsEntry 16 }
nqaMtracertStatsTestFinished OBJECT-TYPE
SYNTAX INTEGER
{
noFinish(1),
finish(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of test execution."
::= { nqaMtracertStatsEntry 17 }
nqaMtracertStatsCurPathTTL OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TTL(time to live) of the current path. "
::= { nqaMtracertStatsEntry 18 }
nqaMtracertStatsMaxPathTTL OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum TTL(time to live) of the path. "
::= { nqaMtracertStatsEntry 19 }
nqaMtracertStatsInPkgLossRate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The loss rate of the incoming packets."
::= { nqaMtracertStatsEntry 20 }
nqaMtracertStatsSGPkgLossRate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The loss rate of the packets from source to multicast group."
::= { nqaMtracertStatsEntry 21}
nqaMtracertStatsInPkgRate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of incoming packets."
::= { nqaMtracertStatsEntry 22 }
nqaMtracertStatsOutPkgRate OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate of outgoing packets."
::= { nqaMtracertStatsEntry 23 }
nqaMtracertStatsTimeDelay OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time delay of packets from hop to hop."
::= { nqaMtracertStatsEntry 24 }
nqaPathMtuStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaPathMtuStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The statistics collection database.
Defines the path MTU Operations Statistics Table for
storing the statistics of a path MTU test."
::= { nqaStats 7 }
nqaPathMtuStatsEntry OBJECT-TYPE
SYNTAX NqaPathMtuStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the nqaPathMtuStatsTable."
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaPathMtuStatsIndex }
::= { nqaPathMtuStatsTable 1 }
NqaPathMtuStatsEntry ::=
SEQUENCE {
nqaPathMtuStatsIndex
Integer32,
nqaPathMtuStatsAddressType
InetAddressType,
nqaPathMtuStatsAddress
InetAddress,
nqaPathMtuStatsCompletions
INTEGER,
nqaPathMtuStatsSentProbes
Counter32,
nqaPathMtuStatsProbeResponses
Counter32,
nqaPathMtuStatsDiscoveryPathMtuMin
Gauge32,
nqaPathMtuStatsDiscoveryPathMtuMax
Gauge32,
nqaPathMtuStatsOptimumFirstStep
Gauge32,
nqaPathMtuStatsBusies
Counter32,
nqaPathMtuStatsTimeouts
Counter32,
nqaPathMtuStatsDrops
Counter32,
nqaPathMtuStatsPathMtu
Gauge32,
nqaPathMtuStatsTestFinished
INTEGER
}
nqaPathMtuStatsIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7FFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of path MTU statistics table, and the times
of dispatching dependency tests."
::= { nqaPathMtuStatsEntry 1 }
nqaPathMtuStatsAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination address type,
and the value range can be unknown(0), ipv4(1) and dns(16)."
::= { nqaPathMtuStatsEntry 2 }
nqaPathMtuStatsAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination address.
It is the source address of the ICMP echo reply packet."
::= { nqaPathMtuStatsEntry 3 }
nqaPathMtuStatsCompletions OBJECT-TYPE
SYNTAX INTEGER
{
noResult(0),
success(1),
failure(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of test."
::= { nqaPathMtuStatsEntry 4 }
nqaPathMtuStatsSentProbes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sent packets."
::= { nqaPathMtuStatsEntry 5 }
nqaPathMtuStatsProbeResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received reponse packets."
::= { nqaPathMtuStatsEntry 6 }
nqaPathMtuStatsDiscoveryPathMtuMin OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The initial length of packet in the path MTU test.
It is the minimal length of a ICMP packet."
::= { nqaPathMtuStatsEntry 7 }
nqaPathMtuStatsDiscoveryPathMtuMax OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximal length of packet in the path MTU test.
It is the maximal MTU of local out-interface."
::= { nqaPathMtuStatsEntry 8 }
nqaPathMtuStatsOptimumFirstStep OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The optimum first step of the path MTU test.
It will take effect if the specified step is lower than it."
::= { nqaPathMtuStatsEntry 9 }
nqaPathMtuStatsBusies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times of failure to apply resource due to the busy system.
such as apply memory or create socket failure."
::= { nqaPathMtuStatsEntry 10 }
nqaPathMtuStatsTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when a NQA operation was not completed before a timeout occurred,
i.e. nqaAdminCtrlTimeOut was exceeded."
::= { nqaPathMtuStatsEntry 11 }
nqaPathMtuStatsDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times probes of the test dropped due to sending or connecting failure."
::= { nqaPathMtuStatsEntry 12 }
nqaPathMtuStatsPathMtu OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of current path MTU."
::= { nqaPathMtuStatsEntry 13 }
nqaPathMtuStatsTestFinished OBJECT-TYPE
SYNTAX INTEGER
{
nofinish(0),
finish(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of test execution."
::= { nqaPathMtuStatsEntry 14 }
nqaPathJitterStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaPathJitterStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which contains the status of latest path jitter operation."
::= { nqaStats 8 }
nqaPathJitterStatsEntry OBJECT-TYPE
SYNTAX NqaPathJitterStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which contains the status of latest path jitter operation.
This entry is created only if the nqaAdminCtrlType is path jitter."
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaPathJitterStatsIndex, nqaPathJitterStatsHopIndex }
::= { nqaPathJitterStatsTable 1 }
NqaPathJitterStatsEntry ::=
SEQUENCE {
nqaPathJitterStatsIndex
Integer32,
nqaPathJitterStatsHopIndex
Integer32,
nqaPathJitterStatsCompletions
INTEGER,
nqaPathJitterStatsAddressType
InetAddressType,
nqaPathJitterStatsAddress
InetAddress,
nqaPathJitterStatsRtdOverThresholds
Counter32,
nqaPathJitterStatsNumOfRtt
Counter32,
nqaPathJitterStatsRttSum
Counter32,
nqaPathJitterStatsRttSum2Low
Counter32,
nqaPathJitterStatsRttSum2High
Counter32,
nqaPathJitterStatsRttMin
Gauge32,
nqaPathJitterStatsRttMax
Gauge32,
nqaPathJitterStatsMinOfPositivesSD
Gauge32,
nqaPathJitterStatsMaxOfPositivesSD
Gauge32,
nqaPathJitterStatsNumOfPositivesSD
Counter32,
nqaPathJitterStatsSumOfPositivesSD
Counter32,
nqaPathJitterStatsSum2OfPositivesSDLow
Counter32,
nqaPathJitterStatsSum2OfPositivesSDHigh
Counter32,
nqaPathJitterStatsMinOfNegativesSD
Gauge32,
nqaPathJitterStatsMaxOfNegativesSD
Gauge32,
nqaPathJitterStatsNumOfNegativesSD
Counter32,
nqaPathJitterStatsSumOfNegativesSD
Counter32,
nqaPathJitterStatsSum2OfNegativesSDLow
Counter32,
nqaPathJitterStatsSum2OfNegativesSDHigh
Counter32,
nqaPathJitterStatsMinOfPositivesDS
Gauge32,
nqaPathJitterStatsMaxOfPositivesDS
Gauge32,
nqaPathJitterStatsNumOfPositivesDS
Counter32,
nqaPathJitterStatsSumOfPositivesDS
Counter32,
nqaPathJitterStatsSum2OfPositivesDSLow
Counter32,
nqaPathJitterStatsSum2OfPositivesDSHigh
Counter32,
nqaPathJitterStatsMinOfNegativesDS
Gauge32,
nqaPathJitterStatsMaxOfNegativesDS
Gauge32,
nqaPathJitterStatsNumOfNegativesDS
Counter32,
nqaPathJitterStatsSumOfNegativesDS
Counter32,
nqaPathJitterStatsSum2OfNegativesDSLow
Counter32,
nqaPathJitterStatsSum2OfNegativesDSHigh
Counter32,
nqaPathJitterStatsPacketLossSD
Counter32,
nqaPathJitterStatsPacketLossDS
Counter32,
nqaPathJitterStatsPacketOutOfSequences
Counter32,
nqaPathJitterStatsErrors
Counter32,
nqaPathJitterStatsBusies
Counter32,
nqaPathJitterStatsTimeouts
Counter32,
nqaPathJitterStatsProbeResponses
Counter32,
nqaPathJitterStatsSentProbes
Counter32,
nqaPathJitterStatsDrops
Counter32,
nqaPathJitterStatsTestFinished
INTEGER,
nqaPathJitterStatsMaxDelaySD
Gauge32,
nqaPathJitterStatsMaxDelayDS
Gauge32,
nqaPathJitterStatsRttAvg
Gauge32,
nqaPathJitterStatsPacketLossRatio
Gauge32,
nqaPathJitterStatsAvgJitter
Gauge32,
nqaPathJitterStatsAvgJitterSD
Gauge32,
nqaPathJitterStatsAvgJitterDS
Gauge32,
nqaPathJitterStatsJitterOut
OCTET STRING,
nqaPathJitterStatsJitterIn
OCTET STRING,
nqaPathJitterStatsOwdOverThresholdsSD
Counter32,
nqaPathJitterStatsPktLossUnknown
Counter32,
nqaPathJitterStatsNumOfOwd
Counter32,
nqaPathJitterStatsOwdSumSD
Counter32,
nqaPathJitterStatsOwdSumDS
Counter32,
nqaPathJitterStatsOwdOverThresholdsDS
Counter32
}
nqaPathJitterStatsIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7FFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of path jitter statistics table, and the times of dispatching dependency tests."
::= { nqaPathJitterStatsEntry 1 }
nqaPathJitterStatsHopIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of path jitter hop."
::= { nqaPathJitterStatsEntry 2 }
nqaPathJitterStatsCompletions OBJECT-TYPE
SYNTAX INTEGER
{
noResult(0),
success(1),
failure(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of path jitter test."
::= { nqaPathJitterStatsEntry 3 }
nqaPathJitterStatsAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination address type in a hop of path jitter test,
and the value range can be unknown(0), ipv4(1) and dns(16)."
::= { nqaPathJitterStatsEntry 4 }
nqaPathJitterStatsAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination address in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 5 }
nqaPathJitterStatsRtdOverThresholds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times of successful executions who's RTD over the threshold in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 6 }
nqaPathJitterStatsNumOfRtt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times that statistics RTT successfully in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 7 }
nqaPathJitterStatsRttSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of RTTs in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 8 }
nqaPathJitterStatsRttSum2Low OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The low order 32 bits of RTT's square sum that successfully measured in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 9 }
nqaPathJitterStatsRttSum2High OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high order 32 bits of RTT's square sum that successfully measured in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 10 }
nqaPathJitterStatsRttMin OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of RTTs that successfully measured in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 11 }
nqaPathJitterStatsRttMax OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of RTTs that successfully measured in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 12 }
nqaPathJitterStatsMinOfPositivesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of positive values of jitter that measured from packets sent from
source to destination in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 13 }
nqaPathJitterStatsMaxOfPositivesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of positive values of jitter that measured from packets sent from
source to destination in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 14 }
nqaPathJitterStatsNumOfPositivesSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of positive values of jitter that measured from packets sent from
source to destination in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 15 }
nqaPathJitterStatsSumOfPositivesSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of positive values of jitter that measured from packets sent from
source to destination in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 16 }
nqaPathJitterStatsSum2OfPositivesSDLow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The low order 32 bits of square sum of positive values of jitter that
measured from packets sent from source to destination in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 17 }
nqaPathJitterStatsSum2OfPositivesSDHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high order 32 bits of square sum of positive values of jitter that
measured from packets sent from source to destination in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 18 }
nqaPathJitterStatsMinOfNegativesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of negative values of jitter that measured from packets sent from
source to destination in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 19 }
nqaPathJitterStatsMaxOfNegativesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of negative values of jitter that measured from packets sent from
source to destination in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 20 }
nqaPathJitterStatsNumOfNegativesSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of negative values of jitter that measured from packets sent from
source to destination in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 21 }
nqaPathJitterStatsSumOfNegativesSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of negative values of jitter that measured from packets sent from
source to destination in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 22 }
nqaPathJitterStatsSum2OfNegativesSDLow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The low order 32 bits of square sum of negative values of jitter that
measured from packets sent from source to destination in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 23 }
nqaPathJitterStatsSum2OfNegativesSDHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high order 32 bits of square sum of negative values of jitter that
measured from packets sent from source to destination in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 24 }
nqaPathJitterStatsMinOfPositivesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of positive values of jitter that measured from packets sent from
destination to source in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 25 }
nqaPathJitterStatsMaxOfPositivesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of positive values of jitter that measured from packets sent from
destination to source in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 26 }
nqaPathJitterStatsNumOfPositivesDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of positive values of jitter that measured from packets sent from
destination to source in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 27 }
nqaPathJitterStatsSumOfPositivesDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of positive values of jitter that measured from packets sent from
destination to source in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 28 }
nqaPathJitterStatsSum2OfPositivesDSLow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The low order 32 bits of square sum of positive values of jitter that
measured from packets sent from destination to source in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 29 }
nqaPathJitterStatsSum2OfPositivesDSHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high order 32 bits of square sum of positive values of jitter that
measured from packetssent from destination to source in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 30 }
nqaPathJitterStatsMinOfNegativesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of negative values of jitter that measured from packets sent from
destination to source in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 31 }
nqaPathJitterStatsMaxOfNegativesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of negative values of jitter that measured from packets sent from
destination to source in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 32 }
nqaPathJitterStatsNumOfNegativesDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of negative values of jitter that measured from packets sent from
destination to source in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 33 }
nqaPathJitterStatsSumOfNegativesDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of negative values of jitter that measured from packets sent from
destination to source in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 34 }
nqaPathJitterStatsSum2OfNegativesDSLow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The low order 32 bits of square sum of negative values of jitter that
measured from packets sent from destination to source in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 35 }
nqaPathJitterStatsSum2OfNegativesDSHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high order 32 bits of square sum of negative values of jitter that
measured from packets sent from destination to source in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 36 }
nqaPathJitterStatsPacketLossSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped packets sent from source to destination in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 37 }
nqaPathJitterStatsPacketLossDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped packets sent from destination to source in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 38 }
nqaPathJitterStatsPacketOutOfSequences OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that return out of sequence."
::= { nqaPathJitterStatsEntry 39 }
nqaPathJitterStatsErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of some other errors type."
::= { nqaPathJitterStatsEntry 40 }
nqaPathJitterStatsBusies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when a path jitter operation could
not be initiated because an internal error."
::= { nqaPathJitterStatsEntry 41 }
nqaPathJitterStatsTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when a NQA operation was not completed
before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded."
::= { nqaPathJitterStatsEntry 42 }
nqaPathJitterStatsProbeResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of responses received for the corresponding test.
The value of this object MUST be reported as 0 when no probe responses have been received."
::= { nqaPathJitterStatsEntry 43 }
nqaPathJitterStatsSentProbes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object reflects the number of packets sent for the corresponding test.
The value of this object MUST be reported as 0 when no probes have been sent."
::= { nqaPathJitterStatsEntry 44 }
nqaPathJitterStatsDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times probes of the test dropped due to sending failure."
::= { nqaPathJitterStatsEntry 45 }
nqaPathJitterStatsTestFinished OBJECT-TYPE
SYNTAX INTEGER
{
noFinish(0),
finish(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of test execution."
::= { nqaPathJitterStatsEntry 46 }
nqaPathJitterStatsMaxDelaySD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all OWD (One Way Delay)
that measured from packets sent from source to destination in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 47 }
nqaPathJitterStatsMaxDelayDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all OWD (One Way Delay)
that measured from packets sent from destination to source in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 48 }
nqaPathJitterStatsRttAvg OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of RTTs that were successfully measured in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 49 }
nqaPathJitterStatsPacketLossRatio OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ratio of the packets lost to all packets sent in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 50 }
nqaPathJitterStatsAvgJitter OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of jitter values that were successfully measured in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 51 }
nqaPathJitterStatsAvgJitterSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average value of jitters that measured from packets sent from
sourse to destination in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 52 }
nqaPathJitterStatsAvgJitterDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average value of jitters that measured from packets sent from
destination to source in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 53 }
nqaPathJitterStatsJitterOut OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"jitter (RFC1889) at responder."
::= { nqaPathJitterStatsEntry 54 }
nqaPathJitterStatsJitterIn OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Jitter (RFC1889) at sender."
::= { nqaPathJitterStatsEntry 55 }
nqaPathJitterStatsOwdOverThresholdsSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tests that violate OWD (One Way Delay)
threshold from source to destination in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 56 }
nqaPathJitterStatsPktLossUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of lost packets for which we can't determine the direction
in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 57 }
nqaPathJitterStatsNumOfOwd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OWDs that were successfully measured in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 58 }
nqaPathJitterStatsOwdSumSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of OWDs that were successfully measured from packets sent from
source to destination in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 59 }
nqaPathJitterStatsOwdSumDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of OWDs that were successfully measured from packets sent from
destination to source in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 60 }
nqaPathJitterStatsOwdOverThresholdsDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tests that violate OWD (One Way Delay) threshold from destination to
source in a hop of path jitter test."
::= { nqaPathJitterStatsEntry 61 }
nqaPppoeStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaPppoeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which contains the rolling accumulated history of the PPPoE operation."
::= { nqaStats 9 }
nqaPppoeStatsEntry OBJECT-TYPE
SYNTAX NqaPppoeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which contains the rolling accumulated history of the PPPoE operation.
This entry is created only if the nqaAdminCtrlType is pppoe."
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaPppoeStatsIndex, nqaPppoeRedialIndex }
::= { nqaPppoeStatsTable 1 }
NqaPppoeStatsEntry ::=
SEQUENCE {
nqaPppoeStatsIndex
Integer32,
nqaPppoeRedialIndex
Integer32,
nqaPppoeStatsCompletions
INTEGER,
nqaPppoeStatsCurrentPhase
INTEGER,
nqaPppoeStatsErrorMessage
INTEGER,
nqaPppoeDiscoveryTimeout
Gauge32,
nqaPppoeLcpTimeout
Gauge32,
nqaPppoeAuthorizationTimeout
Gauge32,
nqaPppoeNcpTimeout
Gauge32,
nqaPppoeConnectionTime
Gauge32,
nqaPppoeClientSessionId
Gauge32,
nqaPppoeClientIpAddress
InetAddress,
nqaPppoeGatewayIpAddress
InetAddress
}
nqaPppoeStatsIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of PPPoE statistics table, and the executing times of dispatching dependency tests."
::= { nqaPppoeStatsEntry 1 }
nqaPppoeRedialIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of PPPoE statistics table, and the redialing times of dispatching dependency tests."
::= { nqaPppoeStatsEntry 2 }
nqaPppoeStatsCompletions OBJECT-TYPE
SYNTAX INTEGER
{
dialupSuccess(1),
dialupFail(2),
stop(3),
exceptionStop(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of PPPoE operation."
::= { nqaPppoeStatsEntry 3 }
nqaPppoeStatsCurrentPhase OBJECT-TYPE
SYNTAX INTEGER
{
discovery(1),
lcp(2),
authorization(3),
ncp(4),
online(5),
stop(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current phase of PPPoE operation."
::= { nqaPppoeStatsEntry 4 }
nqaPppoeStatsErrorMessage OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
timeout(2),
paramNegotiateFail(3),
userAuthenticationFail(4),
peerDownRequest(5),
noError(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The error message result of PPPoE operation."
::= { nqaPppoeStatsEntry 5 }
nqaPppoeDiscoveryTimeout OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time for discovery of PPPoE operation."
::= { nqaPppoeStatsEntry 6 }
nqaPppoeLcpTimeout OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time for lcp negotiate of PPPoE operation."
::= { nqaPppoeStatsEntry 7 }
nqaPppoeAuthorizationTimeout OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time for authentication of PPPoE operation."
::= { nqaPppoeStatsEntry 8 }
nqaPppoeNcpTimeout OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time for ncp negotiate of PPPoE operation."
::= { nqaPppoeStatsEntry 9 }
nqaPppoeConnectionTime OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time for connection of PPPoE operation."
::= { nqaPppoeStatsEntry 10 }
nqaPppoeClientSessionId OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The client sessionID of PPPoE operation."
::= { nqaPppoeStatsEntry 11 }
nqaPppoeClientIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The client ip address of PPPoE operation."
::= { nqaPppoeStatsEntry 12 }
nqaPppoeGatewayIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The gateway ip address of PPPoE operation."
::= { nqaPppoeStatsEntry 13 }
nqaHistory OBJECT IDENTIFIER ::= { nqa 5 }
nqaHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Remote Operations test History Table for
storing the results of a test operation."
::= { nqaHistory 1 }
nqaHistoryEntry OBJECT-TYPE
SYNTAX NqaHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines a table for storing the results of a test
operation. Entries in this table are limited by
the value of the corresponding nqaAdminParaHistoryRowMax."
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaHistoryIndex, nqaHistoryHopIndex, nqaHistoryProbeIndex }
::= { nqaHistoryTable 1 }
NqaHistoryEntry ::=
SEQUENCE {
nqaHistoryIndex
Integer32,
nqaHistoryHopIndex
Integer32,
nqaHistoryProbeIndex
Integer32,
nqaHistoryTimeStamp
DateAndTime,
nqaHistoryAddressType
InetAddressType,
nqaHistoryAddress
InetAddress,
nqaHistoryCompletionTime
Integer32,
nqaHistoryFinishState
INTEGER,
nqaHistoryLastRC
Integer32
}
nqaHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7FFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The history table index and times for dispatching dependency tests."
::= { nqaHistoryEntry 1 }
nqaHistoryHopIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The hop index. If the test type is Traceroute or LSP Traceroute,
the entry only defines one hop. For other types, the default value is 1."
::= { nqaHistoryEntry 2 }
nqaHistoryProbeIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7FFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The probe index of tests."
::= { nqaHistoryEntry 3 }
nqaHistoryTimeStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The start time stamp of a probe."
::= { nqaHistoryEntry 4 }
nqaHistoryAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type of history records."
::= { nqaHistoryEntry 5 }
nqaHistoryAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination address of tests. For Traceroute, it is the destination address of each hop. "
::= { nqaHistoryEntry 6 }
nqaHistoryCompletionTime OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time measured in milliseconds from when
a probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 when it is not possible to transmit a probe."
::= { nqaHistoryEntry 7 }
nqaHistoryFinishState OBJECT-TYPE
SYNTAX INTEGER
{
success(1),
timeout(2),
drop(3),
busy(4),
overThreshold(5),
disconnected(6),
noConnected(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of a test operation made by a remote
host for a particular probe."
::= { nqaHistoryEntry 8 }
nqaHistoryLastRC OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last implementation method specific reply code received.
If the ICMP Echo capability is being used then a successful
probe ends when an ICMP response is received that contains
the code ICMP_ECHOREPLY(0). The ICMP responses are defined
normally in the ip_icmp include file."
::= { nqaHistoryEntry 9 }
nqaMpingHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaMpingHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Remote Operations Mping test History Table for
storing the results of a test operation."
::= { nqaHistory 2 }
nqaMpingHistoryEntry OBJECT-TYPE
SYNTAX NqaMpingHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines a table for storing the results of a test
operation. Entries in this table are limited by
the value of the corresponding nqaAdminParaHistoryRowMax."
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaMpingHistoryIndex, nqaMpingHistoryReceiverIndex, nqaMpingHistoryResponseIndex }
::= { nqaMpingHistoryTable 1 }
NqaMpingHistoryEntry ::=
SEQUENCE {
nqaMpingHistoryIndex
Integer32,
nqaMpingHistoryReceiverIndex
Integer32,
nqaMpingHistoryResponseIndex
Integer32,
nqaMpingHistoryAddressType
InetAddressType,
nqaMpingHistoryAddress
InetAddress,
nqaMpingHistoryReceiverAddress
InetAddress,
nqaMpingHistoryTimeStamp
DateAndTime,
nqaMpingHistoryCompletionTime
Integer32,
nqaMpingHistoryFinishState
INTEGER,
nqaMpingHistoryLastRC
Integer32,
nqaMpingHistoryFibHit
TruthValue
}
nqaMpingHistoryIndex OBJECT-TYPE
SYNTAX Integer32(1..'7FFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Mping history table index and times for dispatching dependency tests."
::= { nqaMpingHistoryEntry 1 }
nqaMpingHistoryReceiverIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7FFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of receiver ,that received mping request packets and response reply packets ."
::= { nqaMpingHistoryEntry 2 }
nqaMpingHistoryResponseIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7FFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of response packets send by receiver"
::= { nqaMpingHistoryEntry 3 }
nqaMpingHistoryAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type of history records."
::= { nqaMpingHistoryEntry 4 }
nqaMpingHistoryAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination address of tests. "
::= { nqaMpingHistoryEntry 5 }
nqaMpingHistoryReceiverAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source address of response package of tests. "
::= { nqaMpingHistoryEntry 6 }
nqaMpingHistoryTimeStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The start time stamp of a probe."
::= { nqaMpingHistoryEntry 7 }
nqaMpingHistoryCompletionTime OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The completion time of a probe in milliseconds."
::= { nqaMpingHistoryEntry 8 }
nqaMpingHistoryFinishState OBJECT-TYPE
SYNTAX INTEGER
{
success(1),
timeout(2),
drop(3),
busy(4),
overThreshold(5),
disconnected(6),
noConnected(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of a test operation made by a remote
host for a particular probe."
::= { nqaMpingHistoryEntry 9 }
nqaMpingHistoryLastRC OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last reply code received."
::= { nqaMpingHistoryEntry 10 }
nqaMpingHistoryFibHit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the fib is hit on the device which received the packet."
::= { nqaMpingHistoryEntry 11 }
nqaMtracertHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaMtracertHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the Remote MtracertOperations test History Table for
storing the results of a test operation."
::= { nqaHistory 3 }
nqaMtracertHistoryEntry OBJECT-TYPE
SYNTAX NqaMtracertHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines a table for storing the results of a test
operation. Entries in this table are limited by
the value of the corresponding nqaAdminParaHistoryRowMax."
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaMtracertHistoryIndex, nqaMtracertHistoryHopIndex }
::= { nqaMtracertHistoryTable 1 }
NqaMtracertHistoryEntry ::=
SEQUENCE {
nqaMtracertHistoryIndex
Integer32,
nqaMtracertHistoryHopIndex
Integer32,
nqaMtracertHistoryAddressType
InetAddressType,
nqaMtracertHistoryAddress
InetAddress,
nqaMtracertHistoryTimeStamp
DateAndTime,
nqaMtracertHistoryCompletionTime
Integer32,
nqaMtracertHistoryLastRC
Integer32,
nqaMtracertHistoryCurQueryMode
INTEGER,
nqaMtracertHistoryQueryArrivalTime
Unsigned32,
nqaMtracertHistoryIncomingIfAddress
InetAddress,
nqaMtracertHistoryOutgoingIfAddress
InetAddress,
nqaMtracertHistoryPreHopRouterAddress
InetAddress,
nqaMtracertHistoryInputPacketCount
Gauge32,
nqaMtracertHistoryOutputPacketCount
Gauge32,
nqaMtracertHistoryTotalSGPacketCount
Gauge32,
nqaMtracertHistoryRtgProtocol
INTEGER,
nqaMtracertHistoryFwdTTL
Gauge32,
nqaMtracertHistoryFwdCode
INTEGER,
nqaMtracertHistroyFinishState
INTEGER
}
nqaMtracertHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7FFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Mtracert history table index and times for dispatching dependency tests."
::= { nqaMtracertHistoryEntry 1 }
nqaMtracertHistoryHopIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of Mtracert hop. "
::= { nqaMtracertHistoryEntry 2 }
nqaMtracertHistoryAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type of history records."
::= { nqaMtracertHistoryEntry 3 }
nqaMtracertHistoryAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination address of tests. For Traceroute, it is the destination address of each hop. "
::= { nqaMtracertHistoryEntry 4 }
nqaMtracertHistoryTimeStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The start time stamp of a probe."
::= { nqaMtracertHistoryEntry 5 }
nqaMtracertHistoryCompletionTime OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time measured in milliseconds from when
a probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 when it is not possible to transmit a probe."
::= { nqaMtracertHistoryEntry 6 }
nqaMtracertHistoryLastRC OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last implementation method specific reply code received.
If the ICMP Echo capability is being used then a successful
probe ends when an ICMP response is received that contains
the code ICMP_ECHOREPLY(0). The ICMP responses are defined
normally in the ip_icmp include file."
::= { nqaMtracertHistoryEntry 7 }
nqaMtracertHistoryCurQueryMode OBJECT-TYPE
SYNTAX INTEGER {
maxHops (1) ,
hopByHop (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current query mode."
::= { nqaMtracertHistoryEntry 8 }
nqaMtracertHistoryQueryArrivalTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Query Arrival Time is a 32-bit NTP timestamp specifying
the arrival time of the traceroute request packet at this router."
::= { nqaMtracertHistoryEntry 9 }
nqaMtracertHistoryIncomingIfAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field specifies the address of the interface on which packets from
this source and group are expected to arrive, or 0 if unknown."
::= { nqaMtracertHistoryEntry 10 }
nqaMtracertHistoryOutgoingIfAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field specifies the address of the interface on which packets from this source
and group flow to the specified destination, or 0 if unknown."
::= { nqaMtracertHistoryEntry 11 }
nqaMtracertHistoryPreHopRouterAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field specifies the router from
which this router expects packets from this source. "
::= { nqaMtracertHistoryEntry 12 }
nqaMtracertHistoryInputPacketCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field contains the number of multicast packets received for
all groups and sources on the incoming interface, or 0xffffffff if
no count can be reported. This counter should have the same
value as ifInMulticastPkts from the IF-MIB for this interface."
::= { nqaMtracertHistoryEntry 13 }
nqaMtracertHistoryOutputPacketCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field contains the number of multicast packets that have
been transmitted or queued for transmission for all groups and
sources on the outgoing interface, or 0xffffffff if no count can
be reported. This counter should have the same value as
ifOutMulti-castPkts from the IF-MIB for this interface."
::= { nqaMtracertHistoryEntry 14 }
nqaMtracertHistoryTotalSGPacketCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field counts the number of packets from the specified source
forwarded by this router to the specified group, or 0xffffffff if
no count can be reported. This counter should have the same value as
ipMRoutePkts from the IPMROUTE-STD-MIB for this forwarding entry."
::= { nqaMtracertHistoryEntry 15 }
nqaMtracertHistoryRtgProtocol OBJECT-TYPE
SYNTAX INTEGER {
dvmrp(1),
mospf(2),
pim(3),
cbt(4) ,
pimUsingSpecRteTab(5) ,
pimUsingStaticRte(6) ,
dvmrpUsingStaticRte(7),
pimUsingMBGPRte(8) ,
cbtUsingSpecRteTab(9),
cbtUsingStaticRte(10) ,
pimUsingState(11),
unknownProtocol(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field describes the routing protocol in use between this
router and the previous-hop router."
::= { nqaMtracertHistoryEntry 16 }
nqaMtracertHistoryFwdTTL OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field contains the TTL that a packet is required to
have before it will be forwarded over the outgoing interface."
::= { nqaMtracertHistoryEntry 17 }
nqaMtracertHistoryFwdCode OBJECT-TYPE
SYNTAX INTEGER
{
noError(1),
wrongIf(2),
pruneSent(3),
pruneRCVD(4),
scoped(5),
noRoute(6),
wrongLastHop(7),
notForwarding(8) ,
reachedRP(9) ,
noMulticast(11),
infoHidden(12),
noSpace(130),
oldRouter(131) ,
adminProhib(132),
unknownError(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field contains a forwarding information/error code.
noError(1): No error
wrongIf(2): Traceroute request arrived on an interface to
which this router would not forward for this
source,group,destination.
pruneSent(3): This router has sent a prune upstream which
applies to the source and group in the tracer-
oute request.
pruneRCVD(4): This router has stopped forwarding for this
source and group in response to a request from
the next hop router.
scoped(5): The group is subject to administrative scoping
at this hop.
noRoute(6): This router has no route for the source or
group and no way to determine a potential
route.
wrongLastHop(7): This router is not the proper last-hop router.
notForwarding(8):This router is not forwarding this
source,group out the outgoing interface for an
unspecified reason.
reachedRP(9): Reached Rendez-vous Point or Core
rpfIf(10): Traceroute request arrived on the expected RPF
interface for this source,group.
noMulticast(11): Traceroute request arrived on an interface
which is not enabled for multicast.
infoHidden(12): One or more hops have been hidden from this
trace.
noSpace(13): There was not enough room to insert another
response data block in the packet.
oldRouter(14): The previous hop router does not understand
traceroute requests.
adminProhib(15): Traceroute is administratively prohibited.
"
::= { nqaMtracertHistoryEntry 18 }
nqaMtracertHistroyFinishState OBJECT-TYPE
SYNTAX INTEGER
{
success(1),
timeout(2),
busy(3),
drop(4),
overThreshold(5),
disconnected(6),
noConnected(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The finish state of a probe."
::= { nqaMtracertHistoryEntry 19 }
nqaVplsMacTracertHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaVplsMacTracertHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the VPLS mac trace Operations test History Table for
storing the results of a test operation."
::= { nqaHistory 4 }
nqaVplsMacTracertHistoryEntry OBJECT-TYPE
SYNTAX NqaVplsMacTracertHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines a table for storing the results of a test
operation. Entries in this table are limited by
the value of the corresponding nqaAdminParaHistoryRowMax."
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaVplsMacTracertHistoryIndex, nqaVplsMacTracertHistoryHopIndex, nqaVplsMacTracertHistoryResponseIndex }
::= { nqaVplsMacTracertHistoryTable 1 }
NqaVplsMacTracertHistoryEntry ::=
SEQUENCE {
nqaVplsMacTracertHistoryIndex
Integer32,
nqaVplsMacTracertHistoryHopIndex
Integer32,
nqaVplsMacTracertHistoryResponseIndex
Integer32,
nqaVplsMacTracertHistoryTimeStamp
DateAndTime,
nqaVplsMacTracertHistoryAddressType
InetAddressType,
nqaVplsMacTracertHistoryAddress
InetAddress,
nqaVplsMacTracertHistoryCompletionTime
Integer32,
nqaVplsMacTracertHistoryFinishState
INTEGER,
nqaVplsMacTracertHistoryHitFlag
TruthValue,
nqaVplsMacTracertHistoryDSCount
Integer32,
nqaVplsMacTracertHistorySuccessPathNode
TruthValue
}
nqaVplsMacTracertHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7FFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VPLS mac trace history table index and times for dispatching dependency tests."
::= { nqaVplsMacTracertHistoryEntry 1 }
nqaVplsMacTracertHistoryHopIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of VPLS mac trace hop. "
::= { nqaVplsMacTracertHistoryEntry 2 }
nqaVplsMacTracertHistoryResponseIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of VPLS mac trace reply packet per hop."
::= { nqaVplsMacTracertHistoryEntry 3 }
nqaVplsMacTracertHistoryTimeStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The start time stamp of a probe."
::= { nqaVplsMacTracertHistoryEntry 4 }
nqaVplsMacTracertHistoryAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type of history records."
::= { nqaVplsMacTracertHistoryEntry 5 }
nqaVplsMacTracertHistoryAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination address of tests. For Traceroute, it is the destination address of each hop. "
::= { nqaVplsMacTracertHistoryEntry 6 }
nqaVplsMacTracertHistoryCompletionTime OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The completion time of a probe in milliseconds.
The amount of time measured in milliseconds from when
a probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 when it is not possible to transmit a probe."
::= { nqaVplsMacTracertHistoryEntry 7 }
nqaVplsMacTracertHistoryFinishState OBJECT-TYPE
SYNTAX INTEGER
{
success(1),
timeout(2),
drop(3),
busy(4),
overThreshold(5),
disconnected(6),
noConnected(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The finish state of a probe."
::= { nqaVplsMacTracertHistoryEntry 8 }
nqaVplsMacTracertHistoryHitFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hit Flag."
::= { nqaVplsMacTracertHistoryEntry 9 }
nqaVplsMacTracertHistoryDSCount OBJECT-TYPE
SYNTAX Integer32 (0..'7FFFFFFF'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of Downstreams."
::= { nqaVplsMacTracertHistoryEntry 10 }
nqaVplsMacTracertHistorySuccessPathNode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether it is a node along the path that passes the Trace test. By default, the value is false, indicating that the object is not a node along the path that passes the Trace test."
-- DEFVAL { false }
::= { nqaVplsMacTracertHistoryEntry 11 }
nqaVplsMacTracertHistoryDSTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaVplsMacTracertHistoryDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the VPLS mac trace Operations test History Downstreanm Table for
storing the results of a test operation."
::= { nqaHistory 5 }
nqaVplsMacTracertHistoryDSEntry OBJECT-TYPE
SYNTAX NqaVplsMacTracertHistoryDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines a table for storing the results of a test
operation. Entries in this table are limited by
the value of the corresponding nqaAdminParaHistoryRowMax."
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaVplsMacTracertHistoryIndex, nqaVplsMacTracertHistoryHopIndex, nqaVplsMacTracertHistoryResponseIndex, nqaVplsMacTracertHistoryDSIndex }
::= { nqaVplsMacTracertHistoryDSTable 1 }
NqaVplsMacTracertHistoryDSEntry ::=
SEQUENCE {
nqaVplsMacTracertHistoryDSIndex
Integer32,
nqaVplsMacTracertHistoryDSAddress
InetAddress
}
nqaVplsMacTracertHistoryDSIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7FFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VPLS mac trace history DS table index."
::= { nqaVplsMacTracertHistoryDSEntry 1 }
nqaVplsMacTracertHistoryDSAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DS address."
::= { nqaVplsMacTracertHistoryDSEntry 2 }
nqaVplsMTraceHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaVplsMTraceHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the remote vpls multicast trace operations test history table for
storing the results of a test operation."
::= { nqaHistory 6 }
nqaVplsMTraceHistoryEntry OBJECT-TYPE
SYNTAX NqaVplsMTraceHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines a table for storing the results of a test
operation. Entries in this table are limited by
the value of the corresponding nqaAdminParaHistoryRowMax."
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaVplsMTraceHistoryIndex, nqaVplsMTraceHistoryHopIndex, nqaVplsMTraceHistoryResponseIndex }
::= { nqaVplsMTraceHistoryTable 1 }
NqaVplsMTraceHistoryEntry ::=
SEQUENCE {
nqaVplsMTraceHistoryIndex
Integer32,
nqaVplsMTraceHistoryHopIndex
Integer32,
nqaVplsMTraceHistoryResponseIndex
Integer32,
nqaVplsMTraceHistoryResponserAddressType
InetAddressType,
nqaVplsMTraceHistoryResponserAddress
InetAddress,
nqaVplsMTraceHistoryUpStreamAddressType
InetAddressType,
nqaVplsMTraceHistoryUpStreamAddress
InetAddress,
nqaVplsMTraceHistoryReceivedTtl
Unsigned32,
nqaVplsMTraceHistoryIGMPVersion
INTEGER,
nqaVplsMTraceHistoryIGMPSnpgEnable
EnableValue,
nqaVplsMTraceHistoryIGMPProxyEnable
EnableValue,
nqaVplsMTraceHistoryIGMPRouterPortLearningEnable
EnableValue,
nqaVplsMTraceHistoryRequireRouterAlertEnable
EnableValue,
nqaVplsMTraceHistoryForwardMode
INTEGER,
nqaVplsMTraceHistoryHitFlag
TruthValue,
nqaVplsMTraceHistoryPWExist
TruthValue,
nqaVplsMTraceHistoryGroupPolicy
INTEGER,
nqaVplsMTraceHistoryCACExist
INTEGER,
nqaVplsMTraceHistoryRcvQueryCount
Gauge32,
nqaVplsMTraceHistoryRcvReportCount
Gauge32,
nqaVplsMTraceHistoryRcvLeaveCount
Gauge32,
nqaVplsMTraceHistoryTimeStamp
DateAndTime,
nqaVplsMTraceHistoryCompletionTime
Integer32,
nqaVplsMTraceHistoryLastRC
Integer32,
nqaVplsMTraceHistoryLastRSC
Integer32,
nqaVplsMTraceHistoryFinishState
INTEGER,
nqaVplsMTraceHistorySuccessPathNode
INTEGER
}
nqaVplsMTraceHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7FFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vpls multicast trace history table index and times for dispatching dependency tests."
::= { nqaVplsMTraceHistoryEntry 1 }
nqaVplsMTraceHistoryHopIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of vpls multicast trace hop. "
::= { nqaVplsMTraceHistoryEntry 2 }
nqaVplsMTraceHistoryResponseIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7FFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of vpls multicast trace responser. "
::= { nqaVplsMTraceHistoryEntry 3 }
nqaVplsMTraceHistoryResponserAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of history record's Responser address."
::= { nqaVplsMTraceHistoryEntry 4 }
nqaVplsMTraceHistoryResponserAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Responser address of tests."
::= { nqaVplsMTraceHistoryEntry 5 }
nqaVplsMTraceHistoryUpStreamAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of history records' last hop address."
::= { nqaVplsMTraceHistoryEntry 6 }
nqaVplsMTraceHistoryUpStreamAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last hop address of tests."
::= { nqaVplsMTraceHistoryEntry 7 }
nqaVplsMTraceHistoryReceivedTtl OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
UNITS "time-to-live value"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of ttl in the received packet."
::= { nqaVplsMTraceHistoryEntry 8 }
nqaVplsMTraceHistoryIGMPVersion OBJECT-TYPE
SYNTAX INTEGER
{
igmpv1(1),
igmpv2(2),
igmpv3(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP protocol version."
::= { nqaVplsMTraceHistoryEntry 9 }
nqaVplsMTraceHistoryIGMPSnpgEnable OBJECT-TYPE
SYNTAX EnableValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP snooping enable state."
::= { nqaVplsMTraceHistoryEntry 10 }
nqaVplsMTraceHistoryIGMPProxyEnable OBJECT-TYPE
SYNTAX EnableValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP proxy enable switch."
::= { nqaVplsMTraceHistoryEntry 11 }
nqaVplsMTraceHistoryIGMPRouterPortLearningEnable OBJECT-TYPE
SYNTAX EnableValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP router port learning enable switch."
::= { nqaVplsMTraceHistoryEntry 12 }
nqaVplsMTraceHistoryRequireRouterAlertEnable OBJECT-TYPE
SYNTAX EnableValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route alert requirement enable switch."
::= { nqaVplsMTraceHistoryEntry 13 }
nqaVplsMTraceHistoryForwardMode OBJECT-TYPE
SYNTAX INTEGER
{
mac(1),
ip(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The forward mode value."
::= { nqaVplsMTraceHistoryEntry 14 }
nqaVplsMTraceHistoryHitFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the fib is hit on the device which received the packet."
::= { nqaVplsMTraceHistoryEntry 15 }
nqaVplsMTraceHistoryPWExist OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the forward PW is exist."
::= { nqaVplsMTraceHistoryEntry 16 }
nqaVplsMTraceHistoryGroupPolicy OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL judge result."
::= { nqaVplsMTraceHistoryEntry 17 }
nqaVplsMTraceHistoryCACExist OBJECT-TYPE
SYNTAX INTEGER
{
yes(1),
no(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the connection admission control comfiguration of current VSI is exist."
::= { nqaVplsMTraceHistoryEntry 18 }
nqaVplsMTraceHistoryRcvQueryCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received query packet number for current IGMP version of current VSI."
::= { nqaVplsMTraceHistoryEntry 19 }
nqaVplsMTraceHistoryRcvReportCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received report packet number for current IGMP version of current VSI."
::= { nqaVplsMTraceHistoryEntry 20 }
nqaVplsMTraceHistoryRcvLeaveCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received leave packet number for current IGMP version of current VSI."
::= { nqaVplsMTraceHistoryEntry 21 }
nqaVplsMTraceHistoryTimeStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The start time stamp of a probe."
::= { nqaVplsMTraceHistoryEntry 22 }
nqaVplsMTraceHistoryCompletionTime OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time measured in milliseconds from when
a probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 when it is not possible to transmit a probe."
::= { nqaVplsMTraceHistoryEntry 23 }
nqaVplsMTraceHistoryLastRC OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last implementation method specific reply code received."
::= { nqaVplsMTraceHistoryEntry 24 }
nqaVplsMTraceHistoryLastRSC OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last implementation method specific reply sub code received."
::= { nqaVplsMTraceHistoryEntry 25 }
nqaVplsMTraceHistoryFinishState OBJECT-TYPE
SYNTAX INTEGER
{
success(1),
timeout(2),
drop(3),
busy(4),
overThreshold(5),
disconnected(6),
noConnected(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The finish state of a probe."
::= { nqaVplsMTraceHistoryEntry 26 }
nqaVplsMTraceHistorySuccessPathNode OBJECT-TYPE
SYNTAX INTEGER
{
onPath(1),
notonPath(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the response router is on the path of a probe. The default value is notonPath(2)."
-- DEFVAL { 2 }
::= { nqaVplsMTraceHistoryEntry 27 }
nqaMacTraceHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaMacTraceHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object defines a list of historical MAC trace test instances for storing the running results of test instances."
::= { nqaHistory 7 }
nqaMacTraceHistoryEntry OBJECT-TYPE
SYNTAX NqaMacTraceHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object defines a table for storing the running results of test instances.
The number of entries in this table is limited by the value of nqaAdminParaHistoryRowMax.
"
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaMacTraceHistoryIndex, nqaMacTraceHistoryReceiveOrder }
::= { nqaMacTraceHistoryTable 1 }
NqaMacTraceHistoryEntry ::=
SEQUENCE {
nqaMacTraceHistoryIndex
Integer32,
nqaMacTraceHistoryReceiveOrder
Integer32,
nqaMacTraceHistoryTTL
Integer32,
nqaMacTraceHistorySeqNumber
Unsigned32,
nqaMacTraceHistoryCompletionTime
Integer32,
nqaMacTraceHistoryForwarded
TruthValue,
nqaMacTraceHistoryTerminalMep
TruthValue,
nqaMacTraceHistoryRelayAction
HWDot1agCfmRelayActionFieldValue,
nqaMacTraceHistoryIngressAction
HWDot1agCfmIngressActionFieldValue,
nqaMacTraceHistoryIngressMac
MacAddress,
nqaMacTraceHistoryIngressIfName
OCTET STRING,
nqaMacTraceHistoryEgressAction
HWDot1agCfmEgressActionFieldValue,
nqaMacTraceHistoryEgressMac
MacAddress,
nqaMacTraceHistoryEgressIfName
OCTET STRING
}
nqaMacTraceHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object indicates the index of the MAC tract history table and the number of times for dispatching dependency tests."
::= { nqaMacTraceHistoryEntry 1 }
nqaMacTraceHistoryReceiveOrder OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the sequence in which LTRs are received."
::= { nqaMacTraceHistoryEntry 2 }
nqaMacTraceHistoryTTL OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the TTL of the LTR."
::= { nqaMacTraceHistoryEntry 3 }
nqaMacTraceHistorySeqNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the sequence number of the LTR."
REFERENCE
"802.1ag clause 12.14.7.5"
::= { nqaMacTraceHistoryEntry 4 }
nqaMacTraceHistoryCompletionTime OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the RTT (ms) of the response packet."
::= { nqaMacTraceHistoryEntry 5 }
nqaMacTraceHistoryForwarded OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the device that sends LTRs continues to forward LTMs."
::= { nqaMacTraceHistoryEntry 6 }
nqaMacTraceHistoryTerminalMep OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the LTR is sent by an MEP."
::= { nqaMacTraceHistoryEntry 7 }
nqaMacTraceHistoryRelayAction OBJECT-TYPE
SYNTAX HWDot1agCfmRelayActionFieldValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the value of the Relay Action field in the LTR."
::= { nqaMacTraceHistoryEntry 8 }
nqaMacTraceHistoryIngressAction OBJECT-TYPE
SYNTAX HWDot1agCfmIngressActionFieldValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the value of the Ingress Action field in the LTR."
::= { nqaMacTraceHistoryEntry 9 }
nqaMacTraceHistoryIngressMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the physical MAC address carried in the ingress MAC address field in the LTR."
::= { nqaMacTraceHistoryEntry 10 }
nqaMacTraceHistoryIngressIfName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the name of the inbound interface of the LTR."
::= { nqaMacTraceHistoryEntry 11 }
nqaMacTraceHistoryEgressAction OBJECT-TYPE
SYNTAX HWDot1agCfmEgressActionFieldValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the value of the Egress Action field in the LTR."
::= { nqaMacTraceHistoryEntry 12 }
nqaMacTraceHistoryEgressMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the MAC address in the Egress MAC address field of the LTR."
::= { nqaMacTraceHistoryEntry 13 }
nqaMacTraceHistoryEgressIfName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the name of the interface that forwards the LTR."
::= { nqaMacTraceHistoryEntry 14 }
nqaNotifications OBJECT IDENTIFIER ::= { nqa 6}
nqaResultsProbeFailed NOTIFICATION-TYPE
OBJECTS {
nqaAdminParaTargetAddressType,
nqaAdminParaTargetAddress,
nqaScheduleOperStatus,
nqaResultsAddressType,
nqaResultsAddress,
nqaResultsCompletionTimeMin,
nqaResultsCompletionTimeMax,
nqaResultsSumCompletionTime,
nqaResultsProbeResponses,
nqaResultsSentProbes,
nqaResultsSumCompletionTime2Low,
nqaResultsSumCompletionTime2High,
nqaResultsLastGoodProbe,
nqaResultsLastGoodPath
}
STATUS current
DESCRIPTION
"Generated when a probe failure is detected when the
corresponding nqaAdminParaTrapGeneration object is set to
probeFailure(0) subject to the value of
nqaAdminParaTrapProbeFailureFilter. The object
nqaAdminParaTrapProbeFailureFilter can be used to specify the
number of successive probe failures that are required
before this notification can be generated.(except for HTTP or Jitter or FTP)"
::= { nqaNotifications 1 }
nqaResultsTestFailed NOTIFICATION-TYPE
OBJECTS {
nqaAdminParaTargetAddressType,
nqaAdminParaTargetAddress,
nqaScheduleOperStatus,
nqaResultsAddressType,
nqaResultsAddress,
nqaResultsCompletionTimeMin,
nqaResultsCompletionTimeMax,
nqaResultsSumCompletionTime,
nqaResultsProbeResponses,
nqaResultsSentProbes,
nqaResultsSumCompletionTime2Low,
nqaResultsSumCompletionTime2High,
nqaResultsLastGoodProbe,
nqaResultsLastGoodPath
}
STATUS current
DESCRIPTION
"Generated when a nqa test is determined to have failed
when the corresponding nqaAdminParaTrapGeneration object is
set to testFailure(1). In this instance
nqaAdminParaTrapTestFailureFilter should specify the number of
probes in a test required to have failed in order to
consider the test as failed. (Except for HTTP or Jitter or FTP)"
::= { nqaNotifications 2 }
nqaResultsTestCompleted NOTIFICATION-TYPE
OBJECTS {
nqaAdminParaTargetAddressType,
nqaAdminParaTargetAddress,
nqaScheduleOperStatus,
nqaResultsAddressType,
nqaResultsAddress,
nqaResultsCompletionTimeMin,
nqaResultsCompletionTimeMax,
nqaResultsSumCompletionTime,
nqaResultsProbeResponses,
nqaResultsSentProbes,
nqaResultsSumCompletionTime2Low,
nqaResultsSumCompletionTime2High,
nqaResultsLastGoodProbe,
nqaResultsLastGoodPath
}
STATUS current
DESCRIPTION
"Generated at the completion of a nqa test when the
corresponding nqaAdminParaTrapGeneration object is set to
testCompletion(2).(except for HTTP or Jitter or FTP)"
::= { nqaNotifications 3 }
nqaResultsThresholdNotification NOTIFICATION-TYPE
OBJECTS {
nqaAdminParaTargetAddressType,
nqaAdminParaTargetAddress,
nqaResultsAddressType,
nqaResultsAddress,
nqaAdminCtrlThreshold1,
nqaResultsCompletionTimeMax,
nqaResultsRTDOverThresholds
}
STATUS current
DESCRIPTION
"If the time of executing tests exceeds the nqaAdminCtrlThreshold1,
the system sends trap information.(except for HTTP or Jitter or FTP)"
::= { nqaNotifications 4 }
nqaHTTPStatsProbeFailed NOTIFICATION-TYPE
OBJECTS {
nqaAdminParaTargetAddressType,
nqaAdminParaTargetAddress,
nqaScheduleOperStatus,
nqaHTTPStatsDNSRTTSum,
nqaHTTPStatsTCPConnectRTTSum,
nqaHTTPStatsTransactionRTTSum,
nqaHTTPStatsDNSServerTimeouts,
nqaHTTPStatsTCPConnectTimeouts,
nqaHTTPStatsTransactionTimeouts,
nqaHTTPStatsDNSQueryErrors,
nqaHTTPStatsTcpConnErrors,
nqaHTTPStatsErrors,
nqaHTTPStatsProbeResponses,
nqaHTTPStatsSendProbes
}
STATUS current
DESCRIPTION
"Generated when a probe failure is detected when the
corresponding nqaAdminParaTrapGeneration object is set to
probeFailure(0) subject to the value of
nqaAdminParaTrapProbeFailureFilter. The object
nqaAdminParaTrapProbeFailureFilter can be used to specify the
number of successive probe failures that are required
before this notification can be generated.(Only for HTTP)"
::= { nqaNotifications 5 }
nqaHTTPStatsTestFailed NOTIFICATION-TYPE
OBJECTS {
nqaAdminParaTargetAddressType,
nqaAdminParaTargetAddress,
nqaScheduleOperStatus,
nqaHTTPStatsDNSRTTSum,
nqaHTTPStatsTCPConnectRTTSum,
nqaHTTPStatsTransactionRTTSum,
nqaHTTPStatsDNSServerTimeouts,
nqaHTTPStatsTCPConnectTimeouts,
nqaHTTPStatsTransactionTimeouts,
nqaHTTPStatsDNSQueryErrors,
nqaHTTPStatsTcpConnErrors,
nqaHTTPStatsErrors,
nqaHTTPStatsProbeResponses,
nqaHTTPStatsSendProbes
}
STATUS current
DESCRIPTION
"Generated when a HTTP test is determined to have failed
when the corresponding nqaAdminParaTrapGeneration object is
set to testFailure(1). In this instance
nqaAdminParaTrapTestFailureFilter should specify the number of
probes in a test required to have failed in order to
consider the test as failed.(Only for HTTP)"
::= { nqaNotifications 6 }
nqaHTTPStatsTestCompleted NOTIFICATION-TYPE
OBJECTS {
nqaAdminParaTargetAddressType,
nqaAdminParaTargetAddress,
nqaScheduleOperStatus,
nqaHTTPStatsDNSRTTSum,
nqaHTTPStatsTCPConnectRTTSum,
nqaHTTPStatsTransactionRTTSum,
nqaHTTPStatsDNSServerTimeouts,
nqaHTTPStatsTCPConnectTimeouts,
nqaHTTPStatsTransactionTimeouts,
nqaHTTPStatsDNSQueryErrors,
nqaHTTPStatsTcpConnErrors,
nqaHTTPStatsErrors,
nqaHTTPStatsProbeResponses,
nqaHTTPStatsSendProbes
}
STATUS current
DESCRIPTION
"Generated at the completion of a HTTP test when the
corresponding nqaAdminParaTrapGeneration object is set to
testCompletion(2)."
::= { nqaNotifications 7 }
nqaHTTPStatsThresholdNotification NOTIFICATION-TYPE
OBJECTS {
nqaAdminParaTargetAddressType,
nqaAdminParaTargetAddress,
nqaAdminCtrlThreshold1,
nqaAdminCtrlThreshold2,
nqaAdminCtrlThreshold3,
nqaHTTPStatsDNSRTTMax,
nqaHTTPStatsTCPConnectRTTMax,
nqaHTTPStatsTransactionRTTMax,
nqaHTTPStatsRTDOverThresholds
}
STATUS current
DESCRIPTION
"If the time of executing tests exceeds the nqaAdminCtrlThreshold1
or nqaAdminCtrlThreshold2 or nqaAdminCtrlThreshold3,
the system sends trap information.(Only for HTTP)"
::= { nqaNotifications 8 }
nqaJitterStatsProbeFailed NOTIFICATION-TYPE
OBJECTS {
nqaAdminParaTargetAddressType,
nqaAdminParaTargetAddress,
nqaScheduleOperStatus,
nqaJitterStatsRTTSum,
nqaJitterStatsRTTSum2Low,
nqaJitterStatsRTTSum2High,
nqaJitterStatsRTTMin,
nqaJitterStatsRTTMax,
nqaJitterStatsPacketOutOfSequences,
nqaJitterStatsErrors,
nqaJitterStatsBusies,
nqaJitterStatsTimeouts,
nqaJitterStatsDrops,
nqaJitterStatsProbeResponses,
nqaJitterStatsSentProbes,
nqaJitterStatsMaxDelaySD,
nqaJitterStatsMaxDelayDS,
nqaJitterStatsJitterOut,
nqaJitterStatsJitterIn,
nqaJitterStatsOWSumSD,
nqaJitterStatsOWSumDS
}
STATUS current
DESCRIPTION
"Generated when a probe failure is detected when the
corresponding nqaAdminParaTrapGeneration object is set to
probeFailure(0) subject to the value of
nqaAdminParaTrapProbeFailureFilter. The object
nqaAdminParaTrapProbeFailureFilter can be used to specify the
number of successive probe failures that are required
before this notification can be generated.(Only for Jitter)"
::= { nqaNotifications 9 }
nqaJitterStatsTestFailed NOTIFICATION-TYPE
OBJECTS {
nqaAdminParaTargetAddressType,
nqaAdminParaTargetAddress,
nqaScheduleOperStatus,
nqaJitterStatsRTTSum,
nqaJitterStatsRTTSum2Low,
nqaJitterStatsRTTSum2High,
nqaJitterStatsRTTMin,
nqaJitterStatsRTTMax,
nqaJitterStatsPacketOutOfSequences,
nqaJitterStatsErrors,
nqaJitterStatsBusies,
nqaJitterStatsTimeouts,
nqaJitterStatsDrops,
nqaJitterStatsProbeResponses,
nqaJitterStatsSentProbes,
nqaJitterStatsMaxDelaySD,
nqaJitterStatsMaxDelayDS,
nqaJitterStatsJitterOut,
nqaJitterStatsJitterIn,
nqaJitterStatsOWSumSD,
nqaJitterStatsOWSumDS
}
STATUS current
DESCRIPTION
"Generated when a Jitter test is determined to have failed
when the corresponding nqaAdminParaTrapGeneration object is
set to testFailure(1). In this instance
nqaAdminParaTrapTestFailureFilter should specify the number of
probes in a test required to have failed in order to
consider the test as failed.(Only for Jitter)"
::= { nqaNotifications 10 }
nqaJitterStatsTestCompleted NOTIFICATION-TYPE
OBJECTS {
nqaAdminParaTargetAddressType,
nqaAdminParaTargetAddress,
nqaScheduleOperStatus,
nqaJitterStatsRTTSum,
nqaJitterStatsRTTSum2Low,
nqaJitterStatsRTTSum2High,
nqaJitterStatsRTTMin,
nqaJitterStatsRTTMax,
nqaJitterStatsPacketOutOfSequences,
nqaJitterStatsErrors,
nqaJitterStatsBusies,
nqaJitterStatsTimeouts,
nqaJitterStatsDrops,
nqaJitterStatsProbeResponses,
nqaJitterStatsSentProbes,
nqaJitterStatsMaxDelaySD,
nqaJitterStatsMaxDelayDS,
nqaJitterStatsJitterOut,
nqaJitterStatsJitterIn,
nqaJitterStatsOWSumSD,
nqaJitterStatsOWSumDS
}
STATUS current
DESCRIPTION
"Generated at the completion of a Jitter test when the
corresponding nqaAdminParaTrapGeneration object is set to
testCompletion(2). (Only for Jitter)"
::= { nqaNotifications 11 }
nqaFTPStatsProbeFailed NOTIFICATION-TYPE
OBJECTS {
nqaAdminParaTargetAddressType,
nqaAdminParaTargetAddress,
nqaScheduleOperStatus,
nqaFTPStatsCtrlConnMaxTime,
nqaFTPStatsDataConnMaxTime,
nqaFTPStatsConnectSumTimeMax,
nqaFTPStatsErrors,
nqaFTPStatsTimeouts,
nqaFTPStatsProbeResponses,
nqaFTPStatsSendProbes
}
STATUS current
DESCRIPTION
"Generated when a probe failure is detected when the
corresponding nqaAdminParaTrapGeneration object is set to
probeFailure(0) subject to the value of
nqaAdminParaTrapProbeFailureFilter. The object
nqaAdminParaTrapProbeFailureFilter can be used to specify the
number of successive probe failures that are required
before this notification can be generated.(Only for FTP)"
::= { nqaNotifications 12 }
nqaFTPStatsTestFailed NOTIFICATION-TYPE
OBJECTS {
nqaAdminParaTargetAddressType,
nqaAdminParaTargetAddress,
nqaScheduleOperStatus,
nqaFTPStatsCtrlConnMaxTime,
nqaFTPStatsDataConnMaxTime,
nqaFTPStatsConnectSumTimeMax,
nqaFTPStatsErrors,
nqaFTPStatsTimeouts,
nqaFTPStatsProbeResponses,
nqaFTPStatsSendProbes
}
STATUS current
DESCRIPTION
"Generated when a FTP test is determined to have failed
when the corresponding nqaAdminParaTrapGeneration object is
set to testFailure(1). In this instance
nqaAdminParaTrapTestFailureFilter should specify the number of
probes in a test required to have failed in order to
consider the test as failed.(Only for FTP)"
::= { nqaNotifications 13 }
nqaFTPStatsTestCompleted NOTIFICATION-TYPE
OBJECTS {
nqaAdminParaTargetAddressType,
nqaAdminParaTargetAddress,
nqaScheduleOperStatus,
nqaFTPStatsCtrlConnMaxTime,
nqaFTPStatsDataConnMaxTime,
nqaFTPStatsConnectSumTimeMax,
nqaFTPStatsErrors,
nqaFTPStatsTimeouts,
nqaFTPStatsProbeResponses,
nqaFTPStatsSendProbes
}
STATUS current
DESCRIPTION
"Generated at the completion of a FTP test when the
corresponding nqaAdminParaTrapGeneration object is set to
testCompletion(2). (Only for FTP)"
::= { nqaNotifications 14 }
nqaFTPStatsThresholdNotification NOTIFICATION-TYPE
OBJECTS {
nqaAdminParaTargetAddressType,
nqaAdminParaTargetAddress,
nqaAdminCtrlThreshold1,
nqaAdminCtrlThreshold2,
nqaFTPStatsCtrlConnMaxTime,
nqaFTPStatsDataConnMaxTime,
nqaFTPStatsRTDOverThresholds
}
STATUS current
DESCRIPTION
"If the time of executing tests exceeds the nqaAdminCtrlThreshold1 or nqaAdminCtrlThreshold2,
the system sends trap information.(Only for FTP)"
::= { nqaNotifications 15 }
nqaJitterStatsRTDThresholdNotification NOTIFICATION-TYPE
OBJECTS {
nqaAdminParaTargetAddressType,
nqaAdminParaTargetAddress,
nqaAdminCtrlThreshold1,
nqaJitterStatsRTTMax,
nqaJitterStatsMaxDelaySD,
nqaJitterStatsMaxDelayDS,
nqaJitterStatsRTDOverThresholds
}
STATUS current
DESCRIPTION
"If the time of executing tests exceeds the nqaAdminCtrlThreshold1,
the system sends trap information. (Only for jitter)"
::= { nqaNotifications 16 }
nqaJitterStatsOWDThresholdNotificationSD NOTIFICATION-TYPE
OBJECTS {
nqaAdminParaTargetAddressType,
nqaAdminParaTargetAddress,
nqaAdminCtrlThreshold2,
nqaJitterStatsRTTMax,
nqaJitterStatsMaxDelaySD,
nqaJitterStatsMaxDelayDS,
nqaJitterStatsOWDOverThresholdsSD
}
STATUS current
DESCRIPTION
"If the time of executing tests exceeds the nqaAdminCtrlThreshold2
the system sends trap information. (Only for jitter)"
::= { nqaNotifications 17 }
nqaJitterStatsOWDThresholdNotificationDS NOTIFICATION-TYPE
OBJECTS {
nqaAdminParaTargetAddressType,
nqaAdminParaTargetAddress,
nqaAdminCtrlThreshold3,
nqaJitterStatsRTTMax,
nqaJitterStatsMaxDelaySD,
nqaJitterStatsMaxDelayDS,
nqaJitterStatsOWDOverThresholdsDS
}
STATUS current
DESCRIPTION
"If the time of executing tests exceeds the nqaAdminCtrlThreshold3
the system sends trap information. (Only for jitter)"
::= { nqaNotifications 18 }
nqaNegotiateFailed NOTIFICATION-TYPE
OBJECTS {
nqaAdminParaTargetAddressType,
nqaAdminParaTargetAddress,
nqaAdminParaTargetPort,
nqaAdminParaVrfName
}
STATUS current
DESCRIPTION
"If negotiation between client and server failed,the system sends trap information."
::= { nqaNotifications 19 }
nqaRisingAlarmNotification NOTIFICATION-TYPE
OBJECTS {
nqaAlarmVariable,
nqaAlarmSampleType,
nqaAlarmValue,
nqaAlarmRisingThreshold,
nqaAlarmDescription
}
STATUS current
DESCRIPTION
"Sending trap messages when the value of the monitored object exceeds nqaAlarmUpperThreshold."
::= { nqaNotifications 20}
nqaFallingAlarmNotification NOTIFICATION-TYPE
OBJECTS {
nqaAlarmVariable,
nqaAlarmSampleType,
nqaAlarmValue,
nqaAlarmFallingThreshold,
nqaAlarmDescription
}
STATUS current
DESCRIPTION
"Sending trap messages when the value of the monitored object is under nqaAlarmLowerThreshold."
::= { nqaNotifications 21}
nqaFtpSaveRecordNotification NOTIFICATION-TYPE
OBJECTS {
nqaFtpSaveRecordLastFileName
}
STATUS current
DESCRIPTION
"Sending trap messages when saving a test result to the FTP server is completed."
::= { nqaNotifications 22 }
nqaPppoeStatsTestFailed NOTIFICATION-TYPE
OBJECTS {
nqaPppoeStatsCompletions,
nqaPppoeStatsCurrentPhase,
nqaPppoeStatsErrorMessage,
nqaPppoeDiscoveryTimeout,
nqaPppoeLcpTimeout,
nqaPppoeAuthorizationTimeout,
nqaPppoeNcpTimeout,
nqaPppoeConnectionTime,
nqaPppoeClientSessionId,
nqaPppoeClientIpAddress,
nqaPppoeGatewayIpAddress
}
STATUS current
DESCRIPTION
"Generated when a PPPoE test is determined to have failed
when the corresponding nqaAdminParaTrapGeneration object is
set to testFailure(1). (Only for PPPoE))"
::= { nqaNotifications 23 }
nqaPppoeStatsTestCompleted NOTIFICATION-TYPE
OBJECTS {
nqaPppoeStatsCompletions,
nqaPppoeStatsCurrentPhase,
nqaPppoeStatsErrorMessage,
nqaPppoeDiscoveryTimeout,
nqaPppoeLcpTimeout,
nqaPppoeAuthorizationTimeout,
nqaPppoeNcpTimeout,
nqaPppoeConnectionTime,
nqaPppoeClientSessionId,
nqaPppoeClientIpAddress,
nqaPppoeGatewayIpAddress
}
STATUS current
DESCRIPTION
"Generated at the completion of a PPPoE test when the
corresponding nqaAdminParaTrapGeneration object is set to
testCompletion(2). (Only for PPPoE)"
::= { nqaNotifications 24 }
nqaConformance OBJECT IDENTIFIER ::= { nqa 7 }
nqaGroups OBJECT IDENTIFIER ::= { nqaConformance 1 }
nqaBaseGroup OBJECT-GROUP
OBJECTS { nqaVersion, nqaReset, nqaTimeOfLastSetError, nqaLastSetError, nqaEnable,
nqaNumOfCurrentCtrlEntry, nqaMaxConcurrentRequests, nqaMaxNumOfRequests, nqaJitterVersion,nqaSupportTestType,nqaSupportServerType}
STATUS current
DESCRIPTION
"Description."
::= { nqaGroups 1 }
nqaAdminGroup OBJECT-GROUP
OBJECTS {nqaAdminCtrlTag, nqaAdminCtrlType, nqaAdminCtrlFrequency, nqaAdminCtrlTimeOut, nqaAdminCtrlThreshold1,
nqaAdminCtrlThreshold2,nqaAdminCtrlThreshold3,nqaAdminCtrlStatus, nqaAdminParaTargetAddressType, nqaAdminParaTargetAddress,
nqaAdminParaTargetPort, nqaAdminParaSourceAddressType, nqaAdminParaSourceAddress, nqaAdminParaSourcePort, nqaAdminParaMaxTtl,
nqaAdminParaInitialTtl, nqaAdminParaStorageType, nqaAdminParaMaxFailures, nqaAdminParaDontFragment, nqaAdminParaDataSize,
nqaAdminParaDataFill, nqaAdminParaIfIndex, nqaAdminParaByPassRouteTable, nqaAdminParaMiscOptions, nqaAdminParaProbeCount,
nqaAdminParaTrapGeneration, nqaAdminParaTrapProbeFailureFilter, nqaAdminParaTrapTestFailureFilter, nqaAdminParaDSField, nqaAdminParaDnsServerAddressType,
nqaAdminParaDnsServerAddress, nqaAdminParaOperation, nqaAdminParaHttpVersion, nqaAdminParaHttpOperationString, nqaAdminParaTestFailurePercent,
nqaAdminParaFtpUserName, nqaAdminParaFtpPassword, nqaAdminParaFtpFilePath, nqaAdminParaFtpFileSize,nqaAdminParaInterval,
nqaAdminParaNumPackets, nqaAdminParaVrfName, nqaAdminParaLspAddressType, nqaAdminParaLspAddressMask, nqaAdminParaLspIpAddress,
nqaAdminParaLspPWE3VcId, nqaAdminParaLspPWE3Type, nqaAdminParaLspPWE3Option, nqaAdminParaLspPWE3RemoteVcId, nqaAdminParaLspPWE3RemoteAddress,
nqaAdminParaLspExp, nqaAdminParaLspReplyMode, nqaAdminParaResultRowMax, nqaAdminParaHistoryRowMax, nqaAdminParaCreateHopsEntries,
nqaAdminParaLspVCType, nqaAdminParaMTraceLastHopAddress,nqaAdminParaMTraceSourceAddress,nqaAdminParaMTraceGroupAddress,nqaAdminParaMTraceMaxTtl,
nqaAdminParaMTraceSendMode,nqaAdminParaMTraceResponseTtl,nqaAdminParaMTraceResponseAddressType,nqaAdminParaMTraceResponseAddress, nqaAdminParaDistanceNodeType,
nqaAdminParaMacAddress, nqaAdminParaRMepID, nqaAdminParaMDName, nqaAdminParaMAName, nqaAdminParaMacTunnelName,
nqaAdminParaCodecType, nqaAdminParaIcpifAdvFactor, nqaAdminParaFtpMode,
nqaScheduleStartType, nqaScheduleStartTime, nqaScheduleEndType, nqaScheduleEndTime,nqaScheduleAgeTime,
nqaScheduleNumOfInitiations, nqaAdminParaIcmpJitterMode, nqaAdminParaPathMtuDiscoveryPathMtuMax, nqaAdminParaPathMtuStep, nqaScheduleOperStatus,
nqaScheduleElapsedTime,nqaScheduleLastFinishIndex,nqaScheduleLastCollectIndex,nqaGroupStatusType,nqaGroupPeriod,
nqaGroupLeaderOwnerIndex,nqaGroupLeaderTestName,nqaGroupMemberNum,nqaGroupMemberFree,nqaAdminParaHardwareBased,nqaAdminParaPppoeUserName,
nqaAdminParaPppoePassword,nqaAdminParaPppoeVlanIf,nqaAdminParaPppoeAuthenticationMode,nqaAdminParaPppoeRedialUpTimes,nqaAdminParaPppoeInterval,nqaAdminParaVsiName,
nqaAdminParaVlanId,nqaAdminParaLspTunnelType,nqaAdminParaLspNextHopAddress,nqaAdminParaLspVersion,nqaAdminParaRemoteAddressType,nqaAdminParaRemoteAddress,nqaAdminParaTimeUnit,
nqaAdminExtPara1,nqaAdminExtPara2,nqaAdminExtPara3,nqaAdminExtPara4,nqaAdminExtPara5,nqaAdminExtPara6,nqaAdminExtPara7,nqaAdminExtPara8,nqaAdminExtPara9,nqaAdminExtPara10,
nqaAdminExtPara11,nqaAdminExtPara12,nqaAdminExtPara13,nqaAdminExtPara14,nqaAdminExtPara15,nqaAdminExtPara16,nqaAdminExtPara17,nqaAdminExtPara18,nqaAdminExtPara19,nqaAdminExtPara20,
nqaAdminExtPara21,nqaAdminExtPara22,nqaAdminExtPara23,nqaAdminExtPara24,nqaAdminExtPara25,nqaAdminExtPara26,nqaAdminExtPara27,nqaAdminExtPara28,nqaAdminExtPara29,nqaAdminExtPara30,
nqaAdminExtPara31,nqaAdminExtPara32,nqaAdminExtPara33,nqaAdminExtPara34,nqaAdminExtPara35,nqaAdminExtPara36,nqaAdminExtPara37,nqaAdminExtPara38,nqaAdminExtPara39,nqaAdminExtPara40,
nqaAdminExtPara41,nqaAdminExtPara42,nqaAdminExtPara43,nqaAdminExtPara44,nqaAdminExtPara45,nqaAdminExtPara46,nqaAdminExtPara47,nqaAdminExtPara48,nqaAdminExtPara49,nqaAdminExtPara50
}
STATUS current
DESCRIPTION
"Description."
::= { nqaGroups 2 }
nqaServerGroup OBJECT-GROUP
OBJECTS { nqaTcpServerAddressType, nqaTcpServerStatus, nqaUdpServerAddressType, nqaUdpServerStatus, nqaIcmpServerAddressType, nqaIcmpServerStatus, nqaServerEnable }
STATUS current
DESCRIPTION
"Description."
::= { nqaGroups 3 }
nqaStatsGroup OBJECT-GROUP
OBJECTS { nqaResultsCompletions, nqaResultsTestAttempts, nqaResultsCurHopCount, nqaResultsCurProbeCount, nqaResultsRTDOverThresholds,
nqaResultsCompletionTimeMin, nqaResultsCompletionTimeMax, nqaResultsDisconnects, nqaResultsTimeouts, nqaResultsBusies,
nqaResultsNoConnections, nqaResultsSequenceErrors, nqaResultsDrops, nqaResultsAddressType, nqaResultsAddress,
nqaResultsProbeResponses, nqaResultsSentProbes, nqaResultsLastGoodProbe, nqaResultsLastGoodPath, nqaResultsTestFinished,
nqaHTTPStatsCompletions, nqaHTTPStatsRTDOverThresholds, nqaHTTPStatsRTTSum, nqaHTTPStatsRTTMin, nqaHTTPStatsRTTMax,
nqaHTTPStatsDNSRTTSum, nqaHTTPStatsDNSRTTMin, nqaHTTPStatsDNSRTTMax, nqaHTTPStatsTCPConnectRTTSum, nqaHTTPStatsTCPConnectRTTMin,
nqaHTTPStatsTCPConnectRTTMax, nqaHTTPStatsTransactionRTTSum, nqaHTTPStatsTransactionRTTMin, nqaHTTPStatsTransactionRTTMax, nqaHTTPStatsMessageBodyOctetsSum,
nqaHTTPStatsDNSServerTimeouts, nqaHTTPStatsTCPConnectTimeouts, nqaHTTPStatsTransactionTimeouts, nqaHTTPStatsDNSQueryErrors, nqaHTTPStatsErrors,
nqaHTTPStatsTcpConnErrors, nqaHTTPStatsProbeResponses, nqaHTTPStatsSendProbes, nqaHTTPStatsBusies, nqaHTTPStatsTestFinished,
nqaJitterStatsCompletions, nqaJitterStatsRTDOverThresholds, nqaJitterStatsNumOfRTT, nqaJitterStatsRTTSum, nqaJitterStatsRTTSum2Low,
nqaJitterStatsRTTSum2High, nqaJitterStatsRTTMin, nqaJitterStatsRTTMax, nqaJitterStatsMinOfPositivesSD, nqaJitterStatsMaxOfPositivesSD,
nqaJitterStatsNumOfPositivesSD, nqaJitterStatsSumOfPositivesSD, nqaJitterStatsSum2OfPositivesSDLow, nqaJitterStatsSum2OfPositivesSDHigh, nqaJitterStatsMinOfNegativesSD,
nqaJitterStatsMaxOfNegativesSD, nqaJitterStatsNumOfNegativesSD, nqaJitterStatsSumOfNegativesSD, nqaJitterStatsSum2OfNegativesSDLow, nqaJitterStatsSum2OfNegativesSDHigh,
nqaJitterStatsMinOfPositivesDS, nqaJitterStatsMaxOfPositivesDS, nqaJitterStatsNumOfPositivesDS, nqaJitterStatsSumOfPositivesDS, nqaJitterStatsSum2OfPositivesDSLow,
nqaJitterStatsSum2OfPositivesDSHigh, nqaJitterStatsMinOfNegativesDS, nqaJitterStatsMaxOfNegativesDS, nqaJitterStatsNumOfNegativesDS, nqaJitterStatsSumOfNegativesDS,
nqaJitterStatsSum2OfNegativesDSLow, nqaJitterStatsSum2OfNegativesDSHigh, nqaJitterStatsPacketLossSD, nqaJitterStatsPacketLossDS, nqaJitterStatsPacketOutOfSequences,
nqaJitterStatsErrors, nqaJitterStatsBusies, nqaJitterStatsTimeouts, nqaJitterStatsProbeResponses, nqaJitterStatsSentProbes,
nqaJitterStatsDrops, nqaJitterStatsTestFinished, nqaJitterStatsMaxDelaySD, nqaJitterStatsMaxDelayDS, nqaJitterStatsRTTAvg,
nqaJitterStatsPacketLossRatio, nqaJitterStatsAvgJitter, nqaJitterStatsAvgJitterSD, nqaJitterStatsAvgJitterDS, nqaJitterStatsJitterOut,
nqaJitterStatsJitterIn, nqaJitterStatsOWDOverThresholdsSD, nqaJitterStatsOWDOverThresholdsDS, nqaJitterStatsPktLossUnknown, nqaJitterStatsNumOfOWD,
nqaJitterStatsOWSumSD, nqaPathJitterStatsCompletions, nqaPathJitterStatsAddressType, nqaPathJitterStatsAddress, nqaPathJitterStatsRtdOverThresholds, nqaPathJitterStatsNumOfRtt, nqaPathJitterStatsRttSum,
nqaJitterStatsOperOfIcpif, nqaJitterStatsOperOfMos, nqaJitterStatsMinDelaySD, nqaJitterStatsSum2DelaySDLow,
nqaJitterStatsSum2DelaySDHigh, nqaJitterStatsMinDelayDS, nqaJitterStatsSum2DelayDSLow, nqaJitterStatsSum2DelayDSHigh,nqaJitterStatsTimeUnit,nqaJitterStatsAvgDelaySD,nqaJitterStatsAvgDelayDS,
nqaJitterStatsPktRewriteNum, nqaJitterStatsPktRewriteRatio, nqaJitterStatsPktDisorderNum, nqaJitterStatsPktDisorderRatio, nqaJitterStatsFragPktDisorderNum, nqaJitterStatsFragPktDisorderRatio,
nqaPathJitterStatsRttSum2Low, nqaPathJitterStatsRttSum2High, nqaPathJitterStatsRttMin, nqaPathJitterStatsRttMax, nqaPathJitterStatsMinOfPositivesSD,
nqaPathJitterStatsMaxOfPositivesSD, nqaPathJitterStatsNumOfPositivesSD, nqaPathJitterStatsSumOfPositivesSD, nqaPathJitterStatsSum2OfPositivesSDLow, nqaPathJitterStatsSum2OfPositivesSDHigh,
nqaPathJitterStatsMinOfNegativesSD, nqaPathJitterStatsMaxOfNegativesSD, nqaPathJitterStatsNumOfNegativesSD, nqaPathJitterStatsSumOfNegativesSD, nqaPathJitterStatsSum2OfNegativesSDLow,
nqaPathJitterStatsSum2OfNegativesSDHigh, nqaPathJitterStatsMinOfPositivesDS, nqaPathJitterStatsMaxOfPositivesDS, nqaPathJitterStatsNumOfPositivesDS, nqaPathJitterStatsSumOfPositivesDS,
nqaPathJitterStatsSum2OfPositivesDSLow, nqaPathJitterStatsSum2OfPositivesDSHigh, nqaPathJitterStatsMinOfNegativesDS, nqaPathJitterStatsMaxOfNegativesDS, nqaPathJitterStatsNumOfNegativesDS,
nqaPathJitterStatsSumOfNegativesDS, nqaPathJitterStatsSum2OfNegativesDSLow, nqaPathJitterStatsSum2OfNegativesDSHigh, nqaPathJitterStatsPacketLossSD, nqaPathJitterStatsPacketLossDS,
nqaPathJitterStatsPacketOutOfSequences, nqaPathJitterStatsErrors, nqaPathJitterStatsBusies, nqaPathJitterStatsTimeouts, nqaPathJitterStatsProbeResponses,
nqaPathJitterStatsSentProbes, nqaPathJitterStatsDrops, nqaPathJitterStatsTestFinished, nqaPathJitterStatsMaxDelaySD, nqaPathJitterStatsMaxDelayDS,
nqaPathJitterStatsRttAvg, nqaPathJitterStatsPacketLossRatio, nqaPathJitterStatsAvgJitter, nqaPathJitterStatsAvgJitterSD, nqaPathJitterStatsAvgJitterDS,
nqaPathJitterStatsJitterOut, nqaPathJitterStatsJitterIn, nqaPathJitterStatsOwdOverThresholdsSD, nqaPathJitterStatsPktLossUnknown, nqaPathJitterStatsNumOfOwd,
nqaPathJitterStatsOwdSumSD, nqaPathJitterStatsOwdSumDS, nqaPathJitterStatsOwdOverThresholdsDS, nqaPathMtuStatsAddressType, nqaPathMtuStatsAddress,
nqaPathMtuStatsCompletions, nqaPathMtuStatsSentProbes, nqaPathMtuStatsDiscoveryPathMtuMin, nqaPathMtuStatsDiscoveryPathMtuMax, nqaPathMtuStatsOptimumFirstStep,
nqaPathMtuStatsBusies, nqaPathMtuStatsTimeouts, nqaPathMtuStatsDrops, nqaPathMtuStatsProbeResponses, nqaPathMtuStatsPathMtu,
nqaPathMtuStatsTestFinished, nqaJitterStatsOWSumDS, nqaResultsSumCompletionTime, nqaResultsSumCompletionTime2Low, nqaResultsSumCompletionTime2High,
nqaFTPStatsCompletions, nqaFTPStatsRTDOverThresholds, nqaFTPStatsCtrlConnMaxTime, nqaFTPStatsCtrlConnMinTime, nqaFTPStatsCtrlConnAveTime,
nqaFTPStatsDataConnMaxTime, nqaFTPStatsDataConnMinTime, nqaFTPStatsDataConnAveTime, nqaFTPStatsConnectSumTimeMax, nqaFTPStatsConnectSumTimeMin,
nqaFTPStatsConnectSumTimeAve, nqaFTPStatsMessageBodyOctetsSum, nqaFTPStatsErrors, nqaFTPStatsTimeouts, nqaFTPStatsDiscontinued,
nqaFTPStatsProbeResponses, nqaFTPStatsSendProbes, nqaFTPStatsTestFinished, nqaMpingStatsTargetAddressType, nqaMpingStatsTargetAddress,
nqaMpingStatsReceiverAddress, nqaMpingStatsCompletions, nqaMpingStatsRTDOverThresholds, nqaMpingStatsSumCompletionTime, nqaMpingStatsSumCompletionTime2Low,
nqaMpingStatsSumCompletionTime2High, nqaMpingStatsCompletionTimeMin, nqaMpingStatsCompletionTimeMax, nqaMpingStatsTimeouts, nqaMpingStatsBusies,
nqaMpingStatsSequenceErrors, nqaMpingStatsDrops, nqaMpingStatsProbeResponses, nqaMpingStatsSentProbes, nqaMpingStatsLastGoodProbe,
nqaMpingStatsTestFinished, nqaMpingStatsReceiverCount, nqaMpingStatsLastFibHit, nqaMpingStatsRttAvg, nqaMpingStatsLostPacketRatio, nqaMtracertStatsAddressType, nqaMtracertStatsAddress, nqaMtracertStatsCompletions, nqaMtracertStatsCurHopCount,
nqaMtracertStatsCurProbeCount, nqaMtracertStatsRTDOverThresholds, nqaMtracertStatsTimeouts, nqaMtracertStatsBusies, nqaMtracertStatsSequenceErrors,
nqaMtracertStatsDrops, nqaMtracertStatsProbeResponses, nqaMtracertStatsSentProbes, nqaMtracertStatsLastGoodProbe, nqaMtracertStatsLastGoodPath,
nqaMtracertStatsTestFinished, nqaMtracertStatsCurPathTTL, nqaMtracertStatsMaxPathTTL, nqaMtracertStatsInPkgLossRate, nqaMtracertStatsSGPkgLossRate,
nqaMtracertStatsInPkgRate, nqaMtracertStatsOutPkgRate, nqaMtracertStatsTimeDelay,nqaResultsRttAvg,nqaResultsLostPacketRatio,nqaHTTPStatsRttAvg,nqaHTTPStatsLostPacketRatio,nqaFTPStatsRttAvg,nqaFTPStatsLostPacketRatio,
nqaPppoeStatsCompletions, nqaPppoeStatsCurrentPhase, nqaPppoeStatsErrorMessage, nqaPppoeDiscoveryTimeout, nqaPppoeLcpTimeout, nqaPppoeAuthorizationTimeout, nqaPppoeNcpTimeout, nqaPppoeConnectionTime, nqaPppoeClientSessionId,
nqaPppoeClientIpAddress, nqaPppoeGatewayIpAddress}
STATUS current
DESCRIPTION
"Description."
::= { nqaGroups 4 }
nqaHistoryGroup OBJECT-GROUP
OBJECTS { nqaHistoryTimeStamp, nqaHistoryAddressType, nqaHistoryAddress, nqaHistoryCompletionTime, nqaHistoryFinishState,
nqaHistoryLastRC, nqaMpingHistoryAddressType, nqaMpingHistoryAddress, nqaMpingHistoryReceiverAddress, nqaMpingHistoryTimeStamp,
nqaMpingHistoryCompletionTime, nqaMpingHistoryFinishState, nqaMpingHistoryLastRC, nqaMpingHistoryFibHit, nqaMtracertHistoryAddressType,
nqaMtracertHistoryAddress, nqaMtracertHistoryTimeStamp, nqaMtracertHistoryCompletionTime, nqaMtracertHistoryLastRC, nqaMtracertHistoryCurQueryMode,
nqaMtracertHistoryQueryArrivalTime, nqaMtracertHistoryIncomingIfAddress, nqaMtracertHistoryOutgoingIfAddress, nqaMtracertHistoryPreHopRouterAddress, nqaMtracertHistoryInputPacketCount,
nqaMtracertHistoryOutputPacketCount, nqaMtracertHistoryTotalSGPacketCount, nqaMtracertHistoryRtgProtocol, nqaMtracertHistoryFwdTTL, nqaMtracertHistoryFwdCode,
nqaMtracertHistroyFinishState, nqaVplsMacTracertHistoryTimeStamp, nqaVplsMacTracertHistoryAddressType, nqaVplsMacTracertHistoryAddress, nqaVplsMacTracertHistoryCompletionTime,
nqaVplsMacTracertHistoryFinishState, nqaVplsMacTracertHistoryHitFlag, nqaVplsMacTracertHistoryDSCount, nqaVplsMacTracertHistorySuccessPathNode, nqaVplsMacTracertHistoryDSAddress,
nqaVplsMTraceHistoryResponserAddressType, nqaVplsMTraceHistoryResponserAddress, nqaVplsMTraceHistoryUpStreamAddressType, nqaVplsMTraceHistoryUpStreamAddress, nqaVplsMTraceHistoryReceivedTtl,
nqaVplsMTraceHistoryIGMPVersion, nqaVplsMTraceHistoryIGMPSnpgEnable, nqaVplsMTraceHistoryIGMPProxyEnable, nqaVplsMTraceHistoryIGMPRouterPortLearningEnable, nqaVplsMTraceHistoryRequireRouterAlertEnable,
nqaVplsMTraceHistoryForwardMode, nqaVplsMTraceHistoryHitFlag, nqaVplsMTraceHistoryPWExist, nqaVplsMTraceHistoryGroupPolicy, nqaVplsMTraceHistoryRcvQueryCount,
nqaVplsMTraceHistoryRcvReportCount, nqaVplsMTraceHistoryRcvLeaveCount, nqaVplsMTraceHistoryTimeStamp, nqaVplsMTraceHistoryCompletionTime, nqaVplsMTraceHistoryLastRC,
nqaVplsMTraceHistoryLastRSC, nqaVplsMTraceHistoryFinishState, nqaVplsMTraceHistorySuccessPathNode,nqaMacTraceHistoryTTL,nqaMacTraceHistorySeqNumber,nqaMacTraceHistoryForwarded,nqaMacTraceHistoryCompletionTime,
nqaMacTraceHistoryTerminalMep,nqaMacTraceHistoryRelayAction,nqaMacTraceHistoryIngressAction,nqaMacTraceHistoryIngressMac,nqaMacTraceHistoryIngressIfName,nqaMacTraceHistoryEgressAction,
nqaMacTraceHistoryEgressMac,nqaMacTraceHistoryEgressIfName
}
STATUS current
DESCRIPTION
"Description."
::= { nqaGroups 5 }
nqaNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
nqaResultsProbeFailed,
nqaResultsTestFailed,
nqaResultsTestCompleted,
nqaResultsThresholdNotification,
nqaHTTPStatsProbeFailed,
nqaHTTPStatsTestFailed,
nqaHTTPStatsTestCompleted,
nqaHTTPStatsThresholdNotification,
nqaJitterStatsProbeFailed,
nqaJitterStatsTestFailed,
nqaJitterStatsTestCompleted,
nqaFTPStatsProbeFailed,
nqaFTPStatsTestFailed,
nqaFTPStatsTestCompleted,
nqaFTPStatsThresholdNotification,
nqaJitterStatsRTDThresholdNotification,
nqaJitterStatsOWDThresholdNotificationSD,
nqaJitterStatsOWDThresholdNotificationDS,
nqaNegotiateFailed ,
nqaRisingAlarmNotification,
nqaFallingAlarmNotification,
nqaFtpSaveRecordNotification,
nqaPppoeStatsTestFailed,
nqaPppoeStatsTestCompleted
}
STATUS current
DESCRIPTION
"The notification which are required to be supported by
implementations of this MIB."
::= { nqaGroups 6 }
nqaCollectStatsGroup OBJECT-GROUP
OBJECTS {
nqaJitterCollectStatsCompletions,nqaJitterCollectStatsRTDOverThresholds,nqaJitterCollectStatsOWDOverThresholdsSD,nqaJitterCollectStatsOWDOverThresholdsDS,nqaJitterCollectStatsNumOfRTT,nqaJitterCollectStatsRTTSum,
nqaJitterCollectStatsRTTSum2Low,nqaJitterCollectStatsRTTSum2High,nqaJitterCollectStatsRTTMin,nqaJitterCollectStatsRTTMax,nqaJitterCollectStatsMinOfPositivesSD,nqaJitterCollectStatsMaxOfPositivesSD,
nqaJitterCollectStatsNumOfPositivesSD,nqaJitterCollectStatsSumOfPositivesSD,nqaJitterCollectStatsSum2OfPositivesSDLow,nqaJitterCollectStatsSum2OfPositivesSDHigh,nqaJitterCollectStatsMinOfNegativesSD,
nqaJitterCollectStatsMaxOfNegativesSD,nqaJitterCollectStatsNumOfNegativesSD,nqaJitterCollectStatsSumOfNegativesSD,nqaJitterCollectStatsSum2OfNegativesSDLow,nqaJitterCollectStatsSum2OfNegativesSDHigh,
nqaJitterCollectStatsMinOfPositivesDS,nqaJitterCollectStatsMaxOfPositivesDS,nqaJitterCollectStatsNumOfPositivesDS,nqaJitterCollectStatsSumOfPositivesDS,nqaJitterCollectStatsSum2OfPositivesDSLow,
nqaJitterCollectStatsSum2OfPositivesDSHigh,nqaJitterCollectStatsMinOfNegativesDS,nqaJitterCollectStatsMaxOfNegativesDS,nqaJitterCollectStatsNumOfNegativesDS,nqaJitterCollectStatsSumOfNegativesDS,
nqaJitterCollectStatsSum2OfNegativesDSLow,nqaJitterCollectStatsSum2OfNegativesDSHigh,nqaJitterCollectStatsMaxDelaySD,nqaJitterCollectStatsMaxDelayDS,nqaJitterCollectStatsNumOfOWD,nqaJitterCollectStatsOWSumSD,
nqaJitterCollectStatsOWSumDS,nqaJitterCollectStatsPacketLossSD,nqaJitterCollectStatsPacketLossDS,nqaJitterCollectStatsPacketLossUnknown,nqaJitterCollectStatsPacketOutOfSequences,nqaJitterCollectStatsPacketLossRatio,
nqaJitterCollectStatsErrors,nqaJitterCollectStatsBusies,nqaJitterCollectStatsTimeouts,nqaJitterCollectStatsProbeResponses,nqaJitterCollectStatsSentProbes,nqaJitterCollectStatsDrops,nqaJitterCollectStatsRTTAvg,
nqaJitterCollectStatsAvgJitter,nqaJitterCollectStatsAvgJitterSD,nqaJitterCollectStatsAvgJitterDS,nqaJitterCollectStatsJitterOut,nqaJitterCollectStatsJitterIn,
nqaJitterCollectStatsMinDelaySD,nqaJitterCollectStatsMinDelayDS,nqaJitterCollectStatsAvgDelaySD,nqaJitterCollectStatsAvgDelayDS, nqaJitterCollectStatsPktRewriteNum, nqaJitterCollectStatsPktRewriteRatio,
nqaJitterCollectStatsPktDisorderNum, nqaJitterCollectStatsPktDisorderRatio, nqaJitterCollectStatsFragPktDisorderNum, nqaJitterCollectStatsFragPktDisorderRatio
}
STATUS current
DESCRIPTION
"Description."
::= { nqaGroups 7 }
nqaAlarmGroup OBJECT-GROUP
OBJECTS {
nqaMaxAlarmNum,nqaMaxEventNum,nqaAlarmVariable,nqaAlarmSampleType,nqaAlarmValue,nqaAlarmStartUpNqaAlarm,nqaAlarmRisingThreshold,nqaAlarmDescription,
nqaAlarmFallingThreshold,nqaAlarmRisingEventIndex,nqaAlarmFallingEventIndex,nqaAlarmStatus,nqaEventDescription,nqaEventAdminName,nqaEventOperationTag,nqaEventType,nqaEventStatus}
STATUS current
DESCRIPTION
"Description."
::= { nqaGroups 8 }
nqaFtpSaveRecordGroup OBJECT-GROUP
OBJECTS {
nqaFtpSaveRecordEnable,nqaFtpSaveRecordIpAddr,nqaFtpSaveRecordVrfName,nqaFtpSaveRecordUserName,nqaFtpSaveRecordPassword,nqaFtpSaveRecordFileName,nqaFtpSaveRecordItemNum,nqaFtpSaveRecordTime,nqaFtpSaveRecordNotificationEnable,nqaFtpSaveRecordLastFileName}
STATUS current
DESCRIPTION
"Description."
::= { nqaGroups 9 }
nqaCompliances OBJECT IDENTIFIER ::= { nqaConformance 2 }
nqaCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Description."
MODULE -- this module
MANDATORY-GROUPS { nqaBaseGroup, nqaAdminGroup, nqaStatsGroup,nqaAlarmGroup,nqaFtpSaveRecordGroup}
::= { nqaCompliances 1 }
nqaCollectStats OBJECT IDENTIFIER ::= { nqa 8 }
nqaJitterCollectStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaJitterCollectStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which contains the rolling accumulated history of the Jitter operation."
::= { nqaCollectStats 1 }
nqaJitterCollectStatsEntry OBJECT-TYPE
SYNTAX NqaJitterCollectStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which contains the rolling accumulated history of the Jitter operation.
This entry is created only if the nqaAdminCtrlType is jitterAppl."
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaJitterCollectStatsIndex }
::= { nqaJitterCollectStatsTable 1 }
NqaJitterCollectStatsEntry ::=
SEQUENCE {
nqaJitterCollectStatsIndex
Integer32,
nqaJitterCollectStatsCompletions
Counter32,
nqaJitterCollectStatsRTDOverThresholds
Counter32,
nqaJitterCollectStatsOWDOverThresholdsSD
Counter32,
nqaJitterCollectStatsOWDOverThresholdsDS
Counter32,
nqaJitterCollectStatsNumOfRTT
Counter32,
nqaJitterCollectStatsRTTSum
Counter32,
nqaJitterCollectStatsRTTSum2Low
Counter32,
nqaJitterCollectStatsRTTSum2High
Counter32,
nqaJitterCollectStatsRTTMin
Gauge32,
nqaJitterCollectStatsRTTMax
Gauge32,
nqaJitterCollectStatsMinOfPositivesSD
Gauge32,
nqaJitterCollectStatsMaxOfPositivesSD
Gauge32,
nqaJitterCollectStatsNumOfPositivesSD
Counter32,
nqaJitterCollectStatsSumOfPositivesSD
Counter32,
nqaJitterCollectStatsSum2OfPositivesSDLow
Counter32,
nqaJitterCollectStatsSum2OfPositivesSDHigh
Counter32,
nqaJitterCollectStatsMinOfNegativesSD
Gauge32,
nqaJitterCollectStatsMaxOfNegativesSD
Gauge32,
nqaJitterCollectStatsNumOfNegativesSD
Counter32,
nqaJitterCollectStatsSumOfNegativesSD
Counter32,
nqaJitterCollectStatsSum2OfNegativesSDLow
Counter32,
nqaJitterCollectStatsSum2OfNegativesSDHigh
Counter32,
nqaJitterCollectStatsMinOfPositivesDS
Gauge32,
nqaJitterCollectStatsMaxOfPositivesDS
Gauge32,
nqaJitterCollectStatsNumOfPositivesDS
Counter32,
nqaJitterCollectStatsSumOfPositivesDS
Counter32,
nqaJitterCollectStatsSum2OfPositivesDSLow
Counter32,
nqaJitterCollectStatsSum2OfPositivesDSHigh
Counter32,
nqaJitterCollectStatsMinOfNegativesDS
Gauge32,
nqaJitterCollectStatsMaxOfNegativesDS
Gauge32,
nqaJitterCollectStatsNumOfNegativesDS
Counter32,
nqaJitterCollectStatsSumOfNegativesDS
Counter32,
nqaJitterCollectStatsSum2OfNegativesDSLow
Counter32,
nqaJitterCollectStatsSum2OfNegativesDSHigh
Counter32,
nqaJitterCollectStatsMaxDelaySD
Gauge32,
nqaJitterCollectStatsMaxDelayDS
Gauge32,
nqaJitterCollectStatsNumOfOWD
Counter32,
nqaJitterCollectStatsOWSumSD
Counter32,
nqaJitterCollectStatsOWSumDS
Counter32,
nqaJitterCollectStatsPacketLossSD
Counter32,
nqaJitterCollectStatsPacketLossDS
Counter32,
nqaJitterCollectStatsPacketLossUnknown
Counter32,
nqaJitterCollectStatsPacketOutOfSequences
Counter32,
nqaJitterCollectStatsPacketLossRatio
Gauge32,
nqaJitterCollectStatsErrors
Counter32,
nqaJitterCollectStatsBusies
Counter32,
nqaJitterCollectStatsTimeouts
Counter32,
nqaJitterCollectStatsProbeResponses
Counter32,
nqaJitterCollectStatsSentProbes
Counter32,
nqaJitterCollectStatsDrops
Counter32,
nqaJitterCollectStatsRTTAvg
Gauge32,
nqaJitterCollectStatsAvgJitter
Gauge32,
nqaJitterCollectStatsAvgJitterSD
Gauge32,
nqaJitterCollectStatsAvgJitterDS
Gauge32,
nqaJitterCollectStatsJitterOut
OCTET STRING,
nqaJitterCollectStatsJitterIn
OCTET STRING,
nqaJitterCollectStatsMinDelaySD
Gauge32,
nqaJitterCollectStatsMinDelayDS
Gauge32,
nqaJitterCollectStatsAvgDelaySD
Gauge32,
nqaJitterCollectStatsAvgDelayDS
Gauge32,
nqaJitterCollectStatsPktRewriteNum
Counter32,
nqaJitterCollectStatsPktRewriteRatio
Gauge32,
nqaJitterCollectStatsPktDisorderNum
Counter32,
nqaJitterCollectStatsPktDisorderRatio
Gauge32,
nqaJitterCollectStatsFragPktDisorderNum
Counter32,
nqaJitterCollectStatsFragPktDisorderRatio
Gauge32
}
nqaJitterCollectStatsIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7FFFFFFF'h)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The third index of jitter collection statistics table."
::= { nqaJitterCollectStatsEntry 1 }
nqaJitterCollectStatsCompletions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the tests that have completed successfully."
::= { nqaJitterCollectStatsEntry 2 }
nqaJitterCollectStatsRTDOverThresholds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tests that violate RTD (Round Trip Delay) threshold."
::= { nqaJitterCollectStatsEntry 3 }
nqaJitterCollectStatsOWDOverThresholdsSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tests that violate OWD (One Way Delay) threshold from source to destination."
::= { nqaJitterCollectStatsEntry 4 }
nqaJitterCollectStatsOWDOverThresholdsDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tests that violate OWD (One Way Delay) threshold from destination to source."
::= { nqaJitterCollectStatsEntry 5 }
nqaJitterCollectStatsNumOfRTT OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RTTs that are successfully measured by tests."
::= { nqaJitterCollectStatsEntry 6 }
nqaJitterCollectStatsRTTSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of RTTs that are successfully measured."
::= { nqaJitterCollectStatsEntry 7 }
nqaJitterCollectStatsRTTSum2Low OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of RTTs that are successfully measured by tests (low order 32 bits)."
::= { nqaJitterCollectStatsEntry 8 }
nqaJitterCollectStatsRTTSum2High OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of RTTs that are successfully measured by tests (high order 32 bits)."
::= { nqaJitterCollectStatsEntry 9 }
nqaJitterCollectStatsRTTMin OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of RTTs that were successfully measured by tests."
::= { nqaJitterCollectStatsEntry 10 }
nqaJitterCollectStatsRTTMax OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of RTTs that were successfully measured by tests."
::= { nqaJitterCollectStatsEntry 11 }
nqaJitterCollectStatsMinOfPositivesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of absolute value of all positive jitter values from source to destination."
::= { nqaJitterCollectStatsEntry 12 }
nqaJitterCollectStatsMaxOfPositivesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of absolute value of all positive jitter values from source to destination."
::= { nqaJitterCollectStatsEntry 13 }
nqaJitterCollectStatsNumOfPositivesSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all positive jitter values from source to destination."
::= { nqaJitterCollectStatsEntry 14 }
nqaJitterCollectStatsSumOfPositivesSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of absolute value of all positive jitter values from source to destination."
::= { nqaJitterCollectStatsEntry 15 }
nqaJitterCollectStatsSum2OfPositivesSDLow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of absolute value of all positive jitter values
from source to destination (low order 32 bits)."
::= { nqaJitterCollectStatsEntry 16 }
nqaJitterCollectStatsSum2OfPositivesSDHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of absolute value of all positive jitter values
from source to destination (high order 32 bits)."
::= { nqaJitterCollectStatsEntry 17 }
nqaJitterCollectStatsMinOfNegativesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of absolute value of all negative jitter values from
source to destination."
::= { nqaJitterCollectStatsEntry 18 }
nqaJitterCollectStatsMaxOfNegativesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of absolute value of all negative jitter values from
source to destination."
::= { nqaJitterCollectStatsEntry 19 }
nqaJitterCollectStatsNumOfNegativesSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all negative jitter values from source to destination."
::= { nqaJitterCollectStatsEntry 20 }
nqaJitterCollectStatsSumOfNegativesSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of absolute value of all negative jitter values from source
to destination."
::= { nqaJitterCollectStatsEntry 21 }
nqaJitterCollectStatsSum2OfNegativesSDLow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of absolute value of all negative values from source
to destination (low order 32 bits)."
::= { nqaJitterCollectStatsEntry 22 }
nqaJitterCollectStatsSum2OfNegativesSDHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of absolute value of all negative values from source
to destination (high order 32 bits)."
::= { nqaJitterCollectStatsEntry 23 }
nqaJitterCollectStatsMinOfPositivesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of absolute value of all positive jitter values from
destination to source."
::= { nqaJitterCollectStatsEntry 24 }
nqaJitterCollectStatsMaxOfPositivesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of absolute value of all positive jitter values from
destination to source."
::= { nqaJitterCollectStatsEntry 25 }
nqaJitterCollectStatsNumOfPositivesDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all positive jitter values from destination to source."
::= { nqaJitterCollectStatsEntry 26 }
nqaJitterCollectStatsSumOfPositivesDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of absolute value of all positive jitter values from
destination to source."
::= { nqaJitterCollectStatsEntry 27 }
nqaJitterCollectStatsSum2OfPositivesDSLow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of absolute value of all positive jitter
values from destination to source (low order 32 bits)."
::= { nqaJitterCollectStatsEntry 28 }
nqaJitterCollectStatsSum2OfPositivesDSHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of absolute value of all positive jitter
values from destination to source (high order 32 bits)."
::= { nqaJitterCollectStatsEntry 29 }
nqaJitterCollectStatsMinOfNegativesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of absolute value of all negative jitter values
from destination to source."
::= { nqaJitterCollectStatsEntry 30 }
nqaJitterCollectStatsMaxOfNegativesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of absolute value of all negative jitter values
from destination to source."
::= { nqaJitterCollectStatsEntry 31 }
nqaJitterCollectStatsNumOfNegativesDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all negative jitter values from destination
to source."
::= { nqaJitterCollectStatsEntry 32 }
nqaJitterCollectStatsSumOfNegativesDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of absolute value of all negative jitter values
from destination to source."
::= { nqaJitterCollectStatsEntry 33 }
nqaJitterCollectStatsSum2OfNegativesDSLow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of absolute value of all negative values
from destination to source (low order 32 bits)."
::= { nqaJitterCollectStatsEntry 34 }
nqaJitterCollectStatsSum2OfNegativesDSHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of absolute value of all negative values
from destination to source (high order 32 bits)."
::= { nqaJitterCollectStatsEntry 35 }
nqaJitterCollectStatsMaxDelaySD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all OWD (One Way Delay) from source to destination."
::= { nqaJitterCollectStatsEntry 36 }
nqaJitterCollectStatsMaxDelayDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all OWD (One Way Delay) from destination to source."
::= { nqaJitterCollectStatsEntry 37 }
nqaJitterCollectStatsNumOfOWD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OWDs that were successfully measured by tests."
::= { nqaJitterCollectStatsEntry 38 }
nqaJitterCollectStatsOWSumSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of OWDs that were successfully measured by tests from
source to destination."
::= { nqaJitterCollectStatsEntry 39 }
nqaJitterCollectStatsOWSumDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of OWDs that were successfully measured by tests from
destination to source."
::= { nqaJitterCollectStatsEntry 40 }
nqaJitterCollectStatsPacketLossSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets lost when sent from source to destination."
::= { nqaJitterCollectStatsEntry 41 }
nqaJitterCollectStatsPacketLossDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets lost when sent from destination to source."
::= { nqaJitterCollectStatsEntry 42 }
nqaJitterCollectStatsPacketLossUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets lost for which we can't determine the direction."
::= { nqaJitterCollectStatsEntry 43 }
nqaJitterCollectStatsPacketOutOfSequences OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets arrived out of sequence."
::= { nqaJitterCollectStatsEntry 44 }
nqaJitterCollectStatsPacketLossRatio OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ratio of the packets lost to all packets sent in the test."
::= { nqaJitterCollectStatsEntry 45 }
nqaJitterCollectStatsErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of errors occurred in the test."
::= { nqaJitterCollectStatsEntry 46 }
nqaJitterCollectStatsBusies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when a test couldn't be initialized because
the previous test has not completed."
::= { nqaJitterCollectStatsEntry 47 }
nqaJitterCollectStatsTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of responses arrived over the time."
::= { nqaJitterCollectStatsEntry 48 }
nqaJitterCollectStatsProbeResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of responses from echo-server for the packets sent by the test."
::= { nqaJitterCollectStatsEntry 49 }
nqaJitterCollectStatsSentProbes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets sent in the test."
::= { nqaJitterCollectStatsEntry 50 }
nqaJitterCollectStatsDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that were sent failed in the test."
::= { nqaJitterCollectStatsEntry 51 }
nqaJitterCollectStatsRTTAvg OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of RTTs that were successfully measured by tests."
::= { nqaJitterCollectStatsEntry 52 }
nqaJitterCollectStatsAvgJitter OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of jitter values that were successfully measured by tests."
::= { nqaJitterCollectStatsEntry 53 }
nqaJitterCollectStatsAvgJitterSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of jitter values from source to destination that were
successfully measured by tests."
::= { nqaJitterCollectStatsEntry 54 }
nqaJitterCollectStatsAvgJitterDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of jitter values from destination to source that were
successfully measured by tests."
::= { nqaJitterCollectStatsEntry 55 }
nqaJitterCollectStatsJitterOut OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Jitter (RFC1889) at responder."
::= { nqaJitterCollectStatsEntry 56 }
nqaJitterCollectStatsJitterIn OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Jitter (RFC1889) at sender."
::= { nqaJitterCollectStatsEntry 57 }
nqaJitterCollectStatsMinDelaySD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all OWD (One Way Delay) from source to destination."
::= { nqaJitterCollectStatsEntry 58 }
nqaJitterCollectStatsMinDelayDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all OWD (One Way Delay) from destination to source."
::= { nqaJitterCollectStatsEntry 59 }
nqaJitterCollectStatsAvgDelaySD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of all OWD (One Way Delay) from source to destination."
::= { nqaJitterCollectStatsEntry 60 }
nqaJitterCollectStatsAvgDelayDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of all OWD (One Way Delay) from destination to source."
::= { nqaJitterCollectStatsEntry 61 }
nqaJitterCollectStatsPktRewriteNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all the packets have been rewrited."
::= { nqaJitterCollectStatsEntry 62 }
nqaJitterCollectStatsPktRewriteRatio OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ratio of all the packets have been rewrited."
::= { nqaJitterCollectStatsEntry 63 }
nqaJitterCollectStatsPktDisorderNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all the packets have been disordered."
::= { nqaJitterCollectStatsEntry 64 }
nqaJitterCollectStatsPktDisorderRatio OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ratio of all the packets have been disordered."
::= { nqaJitterCollectStatsEntry 65 }
nqaJitterCollectStatsFragPktDisorderNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all the packets whose fragments have been disordered."
::= { nqaJitterCollectStatsEntry 66 }
nqaJitterCollectStatsFragPktDisorderRatio OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ratio of all the packets whose fragments have been disordered."
::= { nqaJitterCollectStatsEntry 67 }
nqaAlarm OBJECT IDENTIFIER ::= { nqa 9 }
nqaMaxAlarmNum OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of alarms."
::= { nqaAlarm 1 }
nqaMaxEventNum OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of events that alarms can trigger."
::= { nqaAlarm 2}
nqaAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of alarm entries."
::= { nqaAlarm 3 }
nqaAlarmEntry OBJECT-TYPE
SYNTAX NqaAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of parameters that set up a periodic checking for alarm conditions."
INDEX { nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaAlarmIndex }
::= { nqaAlarmTable 1 }
NqaAlarmEntry ::=
SEQUENCE {
nqaAlarmIndex
Integer32,
nqaAlarmVariable
INTEGER,
nqaAlarmSampleType
INTEGER,
nqaAlarmValue
Integer32,
nqaAlarmStartUpNqaAlarm
INTEGER,
nqaAlarmRisingThreshold
Integer32,
nqaAlarmFallingThreshold
Integer32,
nqaAlarmRisingEventIndex
Integer32,
nqaAlarmFallingEventIndex
Integer32,
nqaAlarmDescription
OCTET STRING,
nqaAlarmStatus
RowStatus
}
nqaAlarmIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies a row in the nqaAlarmTable."
::= { nqaAlarmEntry 1 }
nqaAlarmVariable OBJECT-TYPE
SYNTAX INTEGER
{
rttAvg(1),
lostPacketRatio(2),
packetLossSd(3),
packetLossDs(4),
jitterRavg(5),
jitterSdAvg(6),
jitterDsAvg(7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the particular variable to be sampled."
::= { nqaAlarmEntry 11 }
nqaAlarmSampleType OBJECT-TYPE
SYNTAX INTEGER
{
delta(1),
absolute(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"delta(1): relative value
absolute(2): absolute value
Relative value: indicates the relative value to the last sampling.
Currently, only absolute(2) is supported."
::= { nqaAlarmEntry 12 }
nqaAlarmValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual value of the monitored object is compared with the upper limit and lower limit."
::= { nqaAlarmEntry 13 }
nqaAlarmStartUpNqaAlarm OBJECT-TYPE
SYNTAX INTEGER
{
risingAlarm(1),
fallingAlarm(2),
risingOrFallingAlarm(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The alarm that may be sent when this entry is first
set to valid. If the first sample after this entry
becomes valid is greater than or equal to the
risingThreshold and alarmStartupAlarm is equal to
risingAlarm(1) or risingOrFallingAlarm(3), then a single
rising alarm will be generated. If the first sample
after this entry becomes valid is less than or equal
to the fallingThreshold and alarmStartupAlarm is equal
to fallingAlarm(2) or risingOrFallingAlarm(3), then a
single falling alarm will be generated."
::= { nqaAlarmEntry 14 }
nqaAlarmRisingThreshold OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the upper limit of the alarm."
::= { nqaAlarmEntry 15 }
nqaAlarmFallingThreshold OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the lower limit of the alarm."
::= { nqaAlarmEntry 16 }
nqaAlarmRisingEventIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Index of the event triggered when the node value exceeds the upper limit."
::= { nqaAlarmEntry 17 }
nqaAlarmFallingEventIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Index of the event triggered when the node value is under the lower limit."
::= { nqaAlarmEntry 18 }
nqaAlarmDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..127))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Alarm Description."
::= { nqaAlarmEntry 19}
nqaAlarmStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the alarm row."
::= { nqaAlarmEntry 51 }
nqaEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF NqaEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of events to be generated."
::= { nqaAlarm 4 }
nqaEventEntry OBJECT-TYPE
SYNTAX NqaEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of parameters that describe an event to be generated when certain conditions are met. "
INDEX { nqaEventIndex }
::= { nqaEventTable 1 }
NqaEventEntry ::=
SEQUENCE {
nqaEventIndex
Integer32,
nqaEventType
INTEGER,
nqaEventDescription
OCTET STRING,
nqaEventAdminName
OCTET STRING,
nqaEventOperationTag
OCTET STRING,
nqaEventStatus
RowStatus
}
nqaEventIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies a row in the nqaEventTable."
::= { nqaEventEntry 1 }
nqaEventType OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
log(2),
trap(3),
logAndTrap(4),
linkage(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Event type, that is, behaviors for processing events:
none(1): no behavior
log(2): keeping logs
trap(3): sending trap messages
logandtrap(4): keeping logs and sending trap messages
linkage(5): start the linkaged test-instance."
::= { nqaEventEntry 11 }
nqaEventDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..127))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Event description."
::= { nqaEventEntry 12 }
nqaEventAdminName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Administrator name of event test instance."
::= { nqaEventEntry 13 }
nqaEventOperationTag OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Operation tag of event test instance."
::= { nqaEventEntry 14 }
nqaEventStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the event row."
::= { nqaEventEntry 51}
nqaSaveRecord OBJECT IDENTIFIER ::= { nqa 10}
nqaFtpSaveRecordEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Identifies whether saving test results to the FTP server through FTP is enabled.
enable(1)
disable(2)
By default, the value is disable(2)."
::= { nqaSaveRecord 1}
nqaFtpSaveRecordIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the IP address of the FTP server to which test results are saved."
::= { nqaSaveRecord 2}
nqaFtpSaveRecordVrfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the name of the VRF instance for the FTP server to which test results are saved."
::= { nqaSaveRecord 3}
nqaFtpSaveRecordUserName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the user name of the FTP server to which test results are saved."
::= { nqaSaveRecord 4}
nqaFtpSaveRecordPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the password used when the test results are saved to the FTP server."
::= { nqaSaveRecord 5}
nqaFtpSaveRecordFileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..200))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the file name of used by the FTP server to save test results."
::= { nqaSaveRecord 6}
nqaFtpSaveRecordItemNum OBJECT-TYPE
SYNTAX Integer32 (10000..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the number of NQA test results that can be saved in a file created on the FTP server. The default value is 100000."
-- DEFVAL { 100000 }
::= { nqaSaveRecord 7}
nqaFtpSaveRecordTime OBJECT-TYPE
SYNTAX Integer32 (1..43200)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the duration that NQA test results can be saved in a file created on the FTP server. The default duration is 60 minutes."
-- DEFVAL { 60}
::= { nqaSaveRecord 8}
nqaFtpSaveRecordNotificationEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set whether to send trap messages when saving test results to the FTP server is completed.
By default, the value is disable(2)."
::= { nqaSaveRecord 9}
nqaFtpSaveRecordLastFileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..220))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set the name of the file used to save the last test record to the FTP server."
::= { nqaSaveRecord 10}
END
--
-- NQA-MIB.mib
--