From 424850632361cf118faf78151e2f4b8698cfd71e Mon Sep 17 00:00:00 2001 From: Zhijiang Hu Date: Thu, 17 Aug 2017 03:59:20 -0400 Subject: [PATCH] Add config doc Change-Id: I5df78a9070b4bb136f570a889a3f578d8ee82088 Signed-off-by: Zhijiang Hu --- doc/config.txt | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 doc/config.txt diff --git a/doc/config.txt b/doc/config.txt new file mode 100644 index 00000000..7f6692ae --- /dev/null +++ b/doc/config.txt @@ -0,0 +1,31 @@ +Configuration Guide +=================== + +Before installing Daisy on jump server, you have to configure the +daisy.conf file, then put it in /home/daisy_install/. + +1. you have to supplement the "daisy_management_ip" field with the ip of + management ip of your Daisy server vm. + +2. Now the backend field "default_backend_types" just support the "kolla". + +3. "os_install_type" field just support "pxe" for now. + +4. Daisy now use pxe server to install the os, so "build_pxe" must set to "yes". + If the value in daisy.conf in your env of /home/daisy_install/ dir is "no", + you must change this field to "yes" manually before installing Daisy. + +5. "eth_name" field is the pxe server interface, and this field is required when + the "build_pxe" field set to "yes".This should be set to the interface + (in Daisy Server VM) which will be used for communicating with other target nodes + on management/PXE net plane. Default is ens3. + +6. "ip_address" field is the ip address of pxe server interface. + +7. "net_mask" field is the netmask of pxe server, which is required when the "build_pxe" + is set to "yes" + +8. "client_ip_begin" and "client_ip_end" field are the dhcp range of the pxe server. + +9. If you want to use the multicast type to deliver the kolla image to target node, + set the "daisy_conf_mcast_enabled" field to "True"