Riak cluster 3 nodes example

with haproxy on each node

example-riaks.py

@@ -50,8 +50,8 @@ def setup_riak():
             continue
 
         # print 'Validating {}'.format(r.name)
-        errors = validation.validate_resource(r)
+        local_errors = validation.validate_resource(r)
-        if errors:
+        if local_errors:
             has_errors = True
             print 'ERROR: %s: %s' % (r.name, errors)
 
@@ -77,7 +77,108 @@ def setup_riak():
         add_event(event)
 
     print 'Use solar changes process & orch'
-    sys.exit(1)
+    sys.exit(0)
+
+
+def setup_haproxies():
+    hps = []
+    hpc = []
+    hpsc_http = []
+    hpsc_pb = []
+    for i in xrange(3):
+        num = i + 1
+        hps.append(vr.create('haproxy_service%d' % num,
+                             'resources/haproxy_service',
+                             {})[0])
+        hpc.append(vr.create('haproxy_config%d' % num,
+                             'resources/haproxy_config',
+                             {})[0])
+        hpsc_http.append(vr.create('haproxy_service_config_http%d' % num,
+                                   'resources/haproxy_service_config',
+                                   {'listen_port': 8098,
+                                    'protocol': 'http',
+                                    'name': 'riak_haproxy_http%d' % num})[0])
+        hpsc_pb.append(vr.create('haproxy_service_config_pb%d' % num,
+                                 'resources/haproxy_service_config',
+                                 {'listen_port': 8087,
+                                  'protocol': 'tcp',
+                                  'name': 'riak_haproxy_pb%d' % num})[0])
+
+    riak1 = resource.load('riak_service1')
+    riak2 = resource.load('riak_service2')
+    riak3 = resource.load('riak_service3')
+    riaks = [riak1, riak2, riak3]
+
+    for single_hpsc in hpsc_http:
+        for riak in riaks:
+            signals.connect(riak, single_hpsc, {'ip': 'servers',
+                                                'riak_port_http': 'ports'})
+
+    for single_hpsc in hpsc_pb:
+        for riak in riaks:
+            signals.connect(riak, single_hpsc, {'ip': 'servers',
+                                                'riak_port_pb': 'ports'})
+
+    # haproxy config to haproxy service
+
+    for single_hpc, single_hpsc in zip(hpc, hpsc_http):
+        signals.connect(single_hpsc, single_hpc, {'protocol': 'configs_protocols',
+                                                  'listen_port': 'listen_ports',
+                                                  'name': 'configs_names',
+                                                  'servers': 'configs',
+                                                  'ports': 'configs_ports'})
+
+    for single_hpc, single_hpsc in zip(hpc, hpsc_pb):
+        signals.connect(single_hpsc, single_hpc, {'protocol': 'configs_protocols',
+                                                  'listen_port': 'listen_ports',
+                                                  'name': 'configs_names',
+                                                  'servers': 'configs',
+                                                  'ports': 'configs_ports'})
+
+    for single_hps, single_hpc in zip(hps, hpc):
+        signals.connect(single_hpc, single_hps, {'listen_ports': 'ports'})
+
+    # assign haproxy services to each node
+
+    node1 = resource.load('node1')
+    node2 = resource.load('node2')
+    node3 = resource.load('node3')
+    nodes = [node1, node2, node3]
+
+    for single_node, single_hps in zip(nodes, hps):
+        signals.connect(single_node, single_hps)
+
+    for single_node, single_hpc in zip(nodes, hpc):
+        signals.connect(single_node, single_hpc)
+
+    has_errors = False
+    for r in locals().values():
+
+        # TODO: handle list
+        if not isinstance(r, resource.Resource):
+            continue
+
+        # print 'Validating {}'.format(r.name)
+        local_errors = validation.validate_resource(r)
+        if local_errors:
+            has_errors = True
+            print 'ERROR: %s: %s' % (r.name, errors)
+
+    if has_errors:
+        print "ERRORS"
+        sys.exit(1)
+
+    events = []
+    for node, single_hps, single_hpc in zip(nodes, hps, hpc):
+        r = React(node.name, 'run', 'success', single_hps.name, 'install')
+        d = Dep(single_hps.name, 'install', 'success', single_hpc.name, 'run')
+        events.extend([r, d])
+
+    for event in events:
+        add_event(event)
+
+
+
 
 
 
@@ -91,6 +192,11 @@ def deploy():
     setup_riak()
 
 
+@click.command()
+def add_haproxies():
+    setup_haproxies()
+
+
 @click.command()
 def undeploy():
     raise NotImplemented("Not yet")
@@ -99,6 +205,7 @@ def undeploy():
 
 main.add_command(deploy)
 main.add_command(undeploy)
+main.add_command(add_haproxies)
 
 
 if __name__ == '__main__':

resources/haproxy_config/actions/run.yml

@@ -5,9 +5,10 @@
     config_dir: {src: {{ config_dir.value['src'] }}, dst: {{ config_dir.value['dst'] }}}
     haproxy_ip: {{ ip }}
     haproxy_services:
-      {% for service, ports, listen_port in zip(configs.value, configs_ports.value, listen_ports.value) %}
+      {% for service, ports, listen_port, protocol in zip(configs.value, configs_ports.value, listen_ports.value, configs_protocols.value) %}
       - name: {{ service['emitter_attached_to'] }}
         listen_port: {{ listen_port['value'] }}
+        protocol: {{ protocol['value'] }}
         servers:
           {% for server_ip, server_port in zip(service['value'], ports['value']) %}
           - name: {{ server_ip['emitter_attached_to'] }}
@@ -18,4 +19,4 @@
   tasks:
     - file: path={{ config_dir.value['src'] }}/ state=directory
     - file: path={{ config_dir.value['src'] }}/haproxy.cfg state=touch
-    - template: src={{ resource_dir }}/templates/haproxy.cfg dest={{ config_dir.value['src'] }}/haproxy.cfg
+    - template: src={{ resource_dir }}/templates/haproxy.cfg dest=/etc/haproxy/haproxy.cfg

resources/haproxy_config/meta.yaml

@@ -20,6 +20,9 @@ input:
     configs_ports:
       schema: [{value: [{value: int}]}]
       value: []
+    configs_protocols:
+      schema: [{value: str}]
+      value: []
     ssh_user:
       schema: str!
       value:

resources/haproxy_config/templates/haproxy.cfg

@@ -2,13 +2,13 @@ global
   log 127.0.0.1 local0
   log 127.0.0.1 local1 notice
   maxconn 4096
-  tune.ssl.default-dh-param 2048
+#  tune.ssl.default-dh-param 2048
   pidfile /var/run/haproxy.pid
   user haproxy
   group haproxy
   daemon
   stats socket /var/run/haproxy.stats level admin
-  ssl-default-bind-options no-sslv3
+#  ssl-default-bind-options no-sslv3 # ubuntu 14.04 have too old haproxy
 
 defaults
   log global
@@ -30,6 +30,7 @@ defaults
 
 {% for service in haproxy_services %}
 listen {{ service['name'] }} 0.0.0.0:{{ service['listen_port'] }}
+{% if service['protocol'] == 'http' %}
     mode http
     stats enable
     stats uri /haproxy?stats
@@ -42,5 +43,17 @@ listen {{ service['name'] }} 0.0.0.0:{{ service['listen_port'] }}
     {% for server in service['servers'] %}
     server {{ server['name'] }} {{ server['ip'] }}:{{ server['port'] }} check
     {% endfor %}
+{% elif service['protocol'] == 'tcp' %}
+# tcp there
+    mode tcp
+    mode tcp
+    option tcpka
+    option srvtcpka
+    balance leastconn
+    {% for server in service['servers'] %}
+    server {{ server['name'] }} {{ server['ip'] }}:{{ server['port'] }} check
+    {% endfor %}
+{% endif %}
+
 
 {% endfor %}

resources/haproxy_service/actions/install.yml

@@ -0,0 +1,10 @@
+- hosts: [{{ ip }}]
+  sudo: yes
+  tasks:
+    - apt:
+        name: haproxy
+        state: present
+    - replace:
+        dest: '/etc/default/haproxy'
+        regexp: ENABLED=0
+        replace: ENABLED=1

resources/haproxy_service/actions/run.yml

@@ -2,26 +2,6 @@
 - hosts: [{{ ip }}]
   sudo: yes
   tasks:
-    - docker:
+    - service:
-       name: {{ resource_name }}
+        name: haproxy
-       image: {{ image }}
+        state: reloaded
-       state: running
-       net: host
-       {% if ports.value %}
-       ports:
-         {% for port in ports.value %}
-         {% for p in port['value'] %}
-         - {{ p['value'] }}:{{ p['value'] }}
-         {% endfor %}
-         {% endfor %}
-       {% endif %}
-       {% if host_binds.value %}
-       volumes:
-         # TODO: host_binds might need more work
-         # Currently it's not that trivial to pass custom src: dst here
-         # (when a config variable is passed here from other resource)
-         # so we mount it to the same directory as on host
-         {% for bind in host_binds.value %}
-         - {{ bind['value']['src'] }}:{{ bind['value']['dst'] }}:{{ bind['value'].get('mode', 'ro') }}
-         {% endfor %}
-       {% endif %}

resources/haproxy_service/meta.yaml

@@ -5,18 +5,9 @@ input:
     ip:
       schema: str!
       value:
-    image:
-      schema: str!
-      value: tutum/haproxy
     ports:
       schema: [{value: [{value: int}]}]
       value: []
-    host_binds:
-      schema: [{value: {src: str, dst: str}}]
-      value: []
-    volume_binds:
-      schema: [{src: str, dst: str}]
-      value: []
     ssh_user:
       schema: str!
       value:

resources/haproxy_service_config/meta.yaml

@@ -1,13 +1,16 @@
-id: haproxy_keystone_config
+id: haproxy_general_config
 handler: none
 version: 1.0.0
 input:
     name:
       schema: str!
-      value: keystone-admin
+      value: general_haproxy
     listen_port:
       schema: int!
       value: 9999
+    protocol:
+      schema: str!
+      value: http
     ports:
       schema: [{value: int}]
       value: []
@@ -15,4 +18,4 @@ input:
       schema: [{value: str}]
       value: []
 
-tags: [resources/haproxy, resource/haproxy_keystone_config]
+tags: [resources/haproxy, resource/haproxy_general_config]

resources/riak_node/actions/commit.yml

@@ -1,6 +1,6 @@
 - hosts: [{{ip}}]
   sudo: yes
   tasks:
-    - shell: sleep 30
+    # - shell: sleep 30
     - shell: riak-admin cluster plan
     - shell: riak-admin cluster commit

resources/riak_node/actions/run.yml

@@ -1,25 +1,24 @@
 - hosts: [{{ip}}]
   sudo: yes
   tasks:
+    # those below are mostly for tests
+    - shell: killall -u riak
+      ignore_errors: yes
+    # remove above when non tests
     - shell: curl -s https://packagecloud.io/install/repositories/basho/riak/script.deb.sh | sudo bash
     - apt:
         name: riak
         state: present
-    # - shell: sed -ie "s/127.0.0.1/{{ip}}/g" /etc/riak/riak.conf
     - service:
         name: riak
         state: stopped
-    - replace:
+    - file: path=/etc/riak/riak.conf state=touch
+    - template:
+        src: {{ resource_dir }}/templates/riak.conf
         dest: /etc/riak/riak.conf
-        regexp: '127.0.0.1'
-        replace: '0.0.0.0'
-    - replace:
-        dest: /etc/riak/riak.conf
-        regexp: '^nodename = .*\n'
-        replace: 'nodename = {{riak_name}}\n\n'
-        # TODO: should use name/hostname instead of ip
     - shell: rm -fr /var/lib/riak/kv_vnode/*
     - shell: rm -fr /var/lib/riak/ring/*
+  
     - service:
         name: riak
         state: reloaded

resources/riak_node/meta.yaml

@@ -18,6 +18,15 @@ input:
     riak_name:
       schema: str!
       value:
+    riak_port_http:
+      schema: int!
+      value: 18098
+    riak_port_pb:
+      schema: int!
+      value: 18087
+    riak_port_solr:
+      schema: int!
+      value: 8985
     join_to:
       schema: str
       value:

resources/riak_node/templates/riak.conf

@@ -0,0 +1,494 @@
+## Where to emit the default log messages (typically at 'info'
+## severity):
+## off: disabled
+## file: the file specified by log.console.file
+## console: to standard output (seen when using `riak attach-direct`)
+## both: log.console.file and standard out.
+## 
+## Default: file
+## 
+## Acceptable values:
+##   - one of: off, file, console, both
+log.console = file
+
+## The severity level of the console log, default is 'info'.
+## 
+## Default: info
+## 
+## Acceptable values:
+##   - one of: debug, info, notice, warning, error, critical, alert, emergency, none
+log.console.level = info
+
+## When 'log.console' is set to 'file' or 'both', the file where
+## console messages will be logged.
+## 
+## Default: $(platform_log_dir)/console.log
+## 
+## Acceptable values:
+##   - the path to a file
+log.console.file = $(platform_log_dir)/console.log
+
+## The file where error messages will be logged.
+## 
+## Default: $(platform_log_dir)/error.log
+## 
+## Acceptable values:
+##   - the path to a file
+log.error.file = $(platform_log_dir)/error.log
+
+## When set to 'on', enables log output to syslog.
+## 
+## Default: off
+## 
+## Acceptable values:
+##   - on or off
+log.syslog = off
+
+## Whether to enable the crash log.
+## 
+## Default: on
+## 
+## Acceptable values:
+##   - on or off
+log.crash = on
+
+## If the crash log is enabled, the file where its messages will
+## be written.
+## 
+## Default: $(platform_log_dir)/crash.log
+## 
+## Acceptable values:
+##   - the path to a file
+log.crash.file = $(platform_log_dir)/crash.log
+
+## Maximum size in bytes of individual messages in the crash log
+## 
+## Default: 64KB
+## 
+## Acceptable values:
+##   - a byte size with units, e.g. 10GB
+log.crash.maximum_message_size = 64KB
+
+## Maximum size of the crash log in bytes, before it is rotated
+## 
+## Default: 10MB
+## 
+## Acceptable values:
+##   - a byte size with units, e.g. 10GB
+log.crash.size = 10MB
+
+## The schedule on which to rotate the crash log.  For more
+## information see:
+## https://github.com/basho/lager/blob/master/README.md#internal-log-rotation
+## 
+## Default: $D0
+## 
+## Acceptable values:
+##   - text
+log.crash.rotation = $D0
+
+## The number of rotated crash logs to keep. When set to
+## 'current', only the current open log file is kept.
+## 
+## Default: 5
+## 
+## Acceptable values:
+##   - an integer
+##   - the text "current"
+log.crash.rotation.keep = 5
+
+## Name of the Erlang node
+## 
+## Default: riak@127.0.0.1
+## 
+## Acceptable values:
+##   - text
+nodename = {{riak_name}}
+
+## Cookie for distributed node communication.  All nodes in the
+## same cluster should use the same cookie or they will not be able to
+## communicate.
+## 
+## Default: riak
+## 
+## Acceptable values:
+##   - text
+distributed_cookie = riak
+
+## Sets the number of threads in async thread pool, valid range
+## is 0-1024. If thread support is available, the default is 64.
+## More information at: http://erlang.org/doc/man/erl.html
+## 
+## Default: 64
+## 
+## Acceptable values:
+##   - an integer
+erlang.async_threads = 64
+
+## The number of concurrent ports/sockets
+## Valid range is 1024-134217727
+## 
+## Default: 65536
+## 
+## Acceptable values:
+##   - an integer
+erlang.max_ports = 65536
+
+## Set scheduler forced wakeup interval. All run queues will be
+## scanned each Interval milliseconds. While there are sleeping
+## schedulers in the system, one scheduler will be woken for each
+## non-empty run queue found. An Interval of zero disables this
+## feature, which also is the default.
+## This feature is a workaround for lengthy executing native code, and
+## native code that do not bump reductions properly.
+## More information: http://www.erlang.org/doc/man/erl.html#+sfwi
+## 
+## Default: 500
+## 
+## Acceptable values:
+##   - an integer
+## erlang.schedulers.force_wakeup_interval = 500
+
+## Enable or disable scheduler compaction of load. By default
+## scheduler compaction of load is enabled. When enabled, load
+## balancing will strive for a load distribution which causes as many
+## scheduler threads as possible to be fully loaded (i.e., not run out
+## of work). This is accomplished by migrating load (e.g. runnable
+## processes) into a smaller set of schedulers when schedulers
+## frequently run out of work. When disabled, the frequency with which
+## schedulers run out of work will not be taken into account by the
+## load balancing logic.
+## More information: http://www.erlang.org/doc/man/erl.html#+scl
+## 
+## Default: false
+## 
+## Acceptable values:
+##   - one of: true, false
+## erlang.schedulers.compaction_of_load = false
+
+## Enable or disable scheduler utilization balancing of load. By
+## default scheduler utilization balancing is disabled and instead
+## scheduler compaction of load is enabled which will strive for a
+## load distribution which causes as many scheduler threads as
+## possible to be fully loaded (i.e., not run out of work). When
+## scheduler utilization balancing is enabled the system will instead
+## try to balance scheduler utilization between schedulers. That is,
+## strive for equal scheduler utilization on all schedulers.
+## More information: http://www.erlang.org/doc/man/erl.html#+sub
+## 
+## Acceptable values:
+##   - one of: true, false
+## erlang.schedulers.utilization_balancing = true
+
+## Number of partitions in the cluster (only valid when first
+## creating the cluster). Must be a power of 2, minimum 8 and maximum
+## 1024.
+## 
+## Default: 64
+## 
+## Acceptable values:
+##   - an integer
+ring_size = 8
+
+## Number of concurrent node-to-node transfers allowed.
+## 
+## Default: 2
+## 
+## Acceptable values:
+##   - an integer
+## transfer_limit = 2
+
+## Default cert location for https can be overridden
+## with the ssl config variable, for example:
+## 
+## Acceptable values:
+##   - the path to a file
+## ssl.certfile = $(platform_etc_dir)/cert.pem
+
+## Default key location for https can be overridden with the ssl
+## config variable, for example:
+## 
+## Acceptable values:
+##   - the path to a file
+## ssl.keyfile = $(platform_etc_dir)/key.pem
+
+## Default signing authority location for https can be overridden
+## with the ssl config variable, for example:
+## 
+## Acceptable values:
+##   - the path to a file
+## ssl.cacertfile = $(platform_etc_dir)/cacertfile.pem
+
+## DTrace support Do not enable 'dtrace' unless your Erlang/OTP
+## runtime is compiled to support DTrace.  DTrace is available in
+## R15B01 (supported by the Erlang/OTP official source package) and in
+## R14B04 via a custom source repository & branch.
+## 
+## Default: off
+## 
+## Acceptable values:
+##   - on or off
+dtrace = off
+
+## Platform-specific installation paths (substituted by rebar)
+## 
+## Default: ./bin
+## 
+## Acceptable values:
+##   - the path to a directory
+platform_bin_dir = ./bin
+
+## 
+## Default: ./data
+## 
+## Acceptable values:
+##   - the path to a directory
+platform_data_dir = ./data
+
+## 
+## Default: ./etc
+## 
+## Acceptable values:
+##   - the path to a directory
+platform_etc_dir = ./etc
+
+## 
+## Default: ./lib
+## 
+## Acceptable values:
+##   - the path to a directory
+platform_lib_dir = ./lib
+
+## 
+## Default: ./log
+## 
+## Acceptable values:
+##   - the path to a directory
+platform_log_dir = ./log
+
+## Enable consensus subsystem. Set to 'on' to enable the
+## consensus subsystem used for strongly consistent Riak operations.
+## 
+## Default: off
+## 
+## Acceptable values:
+##   - on or off
+## strong_consistency = on
+
+## listener.http.<name> is an IP address and TCP port that the Riak
+## HTTP interface will bind.
+## 
+## Default: 127.0.0.1:8098
+## 
+## Acceptable values:
+##   - an IP/port pair, e.g. 127.0.0.1:10011
+listener.http.internal = 0.0.0.0:{{riak_port_http}}
+
+## listener.protobuf.<name> is an IP address and TCP port that the Riak
+## Protocol Buffers interface will bind.
+## 
+## Default: 127.0.0.1:8087
+## 
+## Acceptable values:
+##   - an IP/port pair, e.g. 127.0.0.1:10011
+listener.protobuf.internal = 0.0.0.0:{{riak_port_pb}}
+
+## The maximum length to which the queue of pending connections
+## may grow. If set, it must be an integer > 0. If you anticipate a
+## huge number of connections being initialized *simultaneously*, set
+## this number higher.
+## 
+## Default: 128
+## 
+## Acceptable values:
+##   - an integer
+## protobuf.backlog = 128
+
+## listener.https.<name> is an IP address and TCP port that the Riak
+## HTTPS interface will bind.
+## 
+## Acceptable values:
+##   - an IP/port pair, e.g. 127.0.0.1:10011
+## listener.https.internal = 127.0.0.1:8098
+
+## How Riak will repair out-of-sync keys. Some features require
+## this to be set to 'active', including search.
+## * active: out-of-sync keys will be repaired in the background
+## * passive: out-of-sync keys are only repaired on read
+## * active-debug: like active, but outputs verbose debugging
+## information
+## 
+## Default: active
+## 
+## Acceptable values:
+##   - one of: active, passive, active-debug
+anti_entropy = active
+
+## Specifies the storage engine used for Riak's key-value data
+## and secondary indexes (if supported).
+## 
+## Default: bitcask
+## 
+## Acceptable values:
+##   - one of: bitcask, leveldb, memory, multi
+storage_backend = bitcask
+
+## Controls which binary representation of a riak value is stored
+## on disk.
+## * 0: Original erlang:term_to_binary format. Higher space overhead.
+## * 1: New format for more compact storage of small values.
+## 
+## Default: 1
+## 
+## Acceptable values:
+##   - the integer 1
+##   - the integer 0
+object.format = 1
+
+## Reading or writing objects bigger than this size will write a
+## warning in the logs.
+## 
+## Default: 5MB
+## 
+## Acceptable values:
+##   - a byte size with units, e.g. 10GB
+object.size.warning_threshold = 5MB
+
+## Writing an object bigger than this will send a failure to the
+## client.
+## 
+## Default: 50MB
+## 
+## Acceptable values:
+##   - a byte size with units, e.g. 10GB
+object.size.maximum = 50MB
+
+## Writing an object with more than this number of siblings will
+## generate a warning in the logs.
+## 
+## Default: 25
+## 
+## Acceptable values:
+##   - an integer
+object.siblings.warning_threshold = 25
+
+## Writing an object with more than this number of siblings will
+## send a failure to the client.
+## 
+## Default: 100
+## 
+## Acceptable values:
+##   - an integer
+object.siblings.maximum = 100
+
+## A path under which bitcask data files will be stored.
+## 
+## Default: $(platform_data_dir)/bitcask
+## 
+## Acceptable values:
+##   - the path to a directory
+bitcask.data_root = $(platform_data_dir)/bitcask
+
+## Configure how Bitcask writes data to disk.
+## erlang: Erlang's built-in file API
+## nif: Direct calls to the POSIX C API
+## The NIF mode provides higher throughput for certain
+## workloads, but has the potential to negatively impact
+## the Erlang VM, leading to higher worst-case latencies
+## and possible throughput collapse.
+## 
+## Default: erlang
+## 
+## Acceptable values:
+##   - one of: erlang, nif
+bitcask.io_mode = erlang
+
+## Set to 'off' to disable the admin panel.
+## 
+## Default: off
+## 
+## Acceptable values:
+##   - on or off
+riak_control = on
+
+## Authentication mode used for access to the admin panel.
+## 
+## Default: off
+## 
+## Acceptable values:
+##   - one of: off, userlist
+riak_control.auth.mode = off
+
+## If riak control's authentication mode (riak_control.auth.mode)
+## is set to 'userlist' then this is the list of usernames and
+## passwords for access to the admin panel.
+## To create users with given names, add entries of the format:
+## riak_control.auth.user.USERNAME.password = PASSWORD
+## replacing USERNAME with the desired username and PASSWORD with the
+## desired password for that user.
+## 
+## Acceptable values:
+##   - text
+## riak_control.auth.user.admin.password = pass
+
+## This parameter defines the percentage of total server memory
+## to assign to LevelDB. LevelDB will dynamically adjust its internal
+## cache sizes to stay within this size.  The memory size can
+## alternately be assigned as a byte count via leveldb.maximum_memory
+## instead.
+## 
+## Default: 70
+## 
+## Acceptable values:
+##   - an integer
+leveldb.maximum_memory.percent = 70
+
+## To enable Search set this 'on'.
+## 
+## Default: off
+## 
+## Acceptable values:
+##   - on or off
+search = off
+
+## How long Riak will wait for Solr to start. The start sequence
+## will be tried twice. If both attempts timeout, then the Riak node
+## will be shutdown. This may need to be increased as more data is
+## indexed and Solr takes longer to start. Values lower than 1s will
+## be rounded up to the minimum 1s.
+## 
+## Default: 30s
+## 
+## Acceptable values:
+##   - a time duration with units, e.g. '10s' for 10 seconds
+search.solr.start_timeout = 30s
+
+## The port number which Solr binds to.
+## NOTE: Binds on every interface.
+## 
+## Default: 8093
+## 
+## Acceptable values:
+##   - an integer
+search.solr.port = 8093
+
+## The port number which Solr JMX binds to.
+## NOTE: Binds on every interface.
+## 
+## Default: 8985
+## 
+## Acceptable values:
+##   - an integer
+search.solr.jmx_port = 8985
+
+## The options to pass to the Solr JVM.  Non-standard options,
+## i.e. -XX, may not be portable across JVM implementations.
+## E.g. -XX:+UseCompressedStrings
+## 
+## Default: -d64 -Xms1g -Xmx1g -XX:+UseStringCache -XX:+UseCompressedOops
+## 
+## Acceptable values:
+##   - text
+search.solr.jvm_options = -d64 -Xms1g -Xmx1g -XX:+UseStringCache -XX:+UseCompressedOops
+
+# new