8be490610c
* Use neutron base and API(server) resources * Add db and db user for neutron composition layer Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
5.1 KiB
Neutron puppet resource
Installs the neutron package and configures /etc/neutron/neutron.conf for SSL, AMQP, logging, service plugins and other stuff. Does not produce any services.
Parameters:
source https://github.com/openstack/puppet-neutron/blob/5.1.0/manifests/init.pp
package_ensure
(optional) The state of the package
Defaults to 'present'
verbose
(optional) Verbose logging
Defaults to False
debug
(optional) Print debug messages in the logs
Defaults to False
bind_host
(optional) The IP/interface to bind to
Defaults to 0.0.0.0 (all interfaces)
bind_port
(optional) The port to use
Defaults to 9696
core_plugin
(optional) Neutron plugin provider
Defaults to openvswitch
Could be bigswitch, brocade, cisco, embrane, hyperv, linuxbridge, midonet, ml2, mlnx, nec, nicira, plumgrid, ryu
service_plugins
(optional) Advanced service modules.
Could be an array that can have these elements:
router, firewall, lbaas, vpnaas, metering
Defaults to empty
auth_strategy
(optional) How to authenticate
Defaults to 'keystone'. 'noauth' is the only other valid option
base_mac
(optional) The MAC address pattern to use.
Defaults to fa:16:3e:00:00:00
mac_generation_retries
(optional) How many times to try to generate a unique mac
Defaults to 16
dhcp_lease_duration
(optional) DHCP lease
Defaults to 86400 seconds
dhcp_agents_per_network
(optional) Number of DHCP agents scheduled to host a network.
This enables redundant DHCP agents for configured networks.
Defaults to 1
network_device_mtu
(optional) The MTU size for the interfaces managed by neutron
Defaults to undef
dhcp_agent_notification
(optional) Allow sending resource operation notification to DHCP agent.
Defaults to true
allow_bulk
(optional) Enable bulk crud operations
Defaults to true
allow_pagination
(optional) Enable pagination
Defaults to false
allow_sorting
(optional) Enable sorting
Defaults to false
allow_overlapping_ips
(optional) Enables network namespaces
Defaults to false
api_extensions_path
(optional) Specify additional paths for API extensions that the
module in use needs to load.
Defaults to undef
report_interval
(optional) Seconds between nodes reporting state to server; should be less than
agent_down_time, best if it is half or less than agent_down_time.
agent_down_time is a config for neutron-server, set by class neutron::server
report_interval is a config for neutron agents, set by class neutron
Defaults to: 30
control_exchange
(optional) What RPC queue/exchange to use
Defaults to neutron
rpc_backend
(optional) what rpc/queuing service to use
Defaults to impl_kombu (rabbitmq)
rabbit_password
rabbit_host
rabbit_port
rabbit_user
(optional) Various rabbitmq settings
rabbit_hosts
(optional) array of rabbitmq servers for HA.
A single IP address, such as a VIP, can be used for load-balancing
multiple RabbitMQ Brokers.
Defaults to false
rabbit_use_ssl
(optional) Connect over SSL for RabbitMQ
Defaults to false
kombu_ssl_ca_certs
(optional) SSL certification authority file (valid only if SSL enabled).
Defaults to undef
kombu_ssl_certfile
(optional) SSL cert file (valid only if SSL enabled).
Defaults to undef
kombu_ssl_keyfile
(optional) SSL key file (valid only if SSL enabled).
Defaults to undef
kombu_ssl_version
(optional) SSL version to use (valid only if SSL enabled).
Valid values are TLSv1, SSLv23 and SSLv3. SSLv2 may be
available on some distributions.
Defaults to 'TLSv1'
kombu_reconnect_delay
(optional) The amount of time to wait before attempting to reconnect
to MQ provider. This is used in some cases where you may need to wait
for the provider to propery premote the master before attempting to
reconnect. See https://review.openstack.org/#/c/76686
Defaults to '1.0'
qpid_hostname
qpid_port
qpid_username
qpid_password
qpid_heartbeat
qpid_protocol
qpid_tcp_nodelay
qpid_reconnect
qpid_reconnect_timeout
qpid_reconnect_limit
qpid_reconnect_interval
qpid_reconnect_interval_min
qpid_reconnect_interval_max
(optional) various QPID options
use_ssl
(optinal) Enable SSL on the API server
Defaults to false, not set
cert_file
(optinal) certificate file to use when starting api server securely
defaults to false, not set
key_file
(optional) Private key file to use when starting API server securely
Defaults to false, not set
ca_file
(optional) CA certificate file to use to verify connecting clients
Defaults to false, not set
use_syslog
(optional) Use syslog for logging
Defaults to false
log_facility
(optional) Syslog facility to receive log lines
Defaults to LOG_USER
log_file
(optional) Where to log
Defaults to false
log_dir
(optional) Directory where logs should be stored
If set to boolean false, it will not log to any directory
Defaults to /var/log/neutron