Add Continuous Integration (CI) example

Add an example of how to use Molten Iron inside of a
Continuous Integration environment.

Change-Id: If4e2bc50ae475bf77d7fd933ae253e1439cb758d

nodepool/molteniron/README.md

@@ -79,3 +79,52 @@ directory.
 ```bash
 (LOG=$(pwd)/testenv/log; sed -i -r -e 's,^(logdir: )(.*)$,\1'${LOG}',' conf.yaml; rm -rf testenv/; tox -e testenv)
 ```
+
+Running inside a Continuous Integration environment
+---------------------------------------------------
+
+During the creation of a job, add the following snippet of bash code:
+
+```bash
+# Setup MoltenIron and all necessary prerequisites.
+# And then call the MI script to allocate a node.
+(
+  REPO_DIR=/opt/stack/new/third-party-ci-tools
+  MI_CONF_DIR=/usr/local/etc/molteniron/
+  MI_IP=10.1.2.3 # @TODO - Replace with your IP addr here!
+
+  # Grab molteniron and install it
+  git clone https://git.openstack.org/openstack/third-party-ci-tools ${REPO_DIR} || exit 1
+
+  cd ${REPO_DIR}/nodepool/molteniron
+
+  # @BUG Install prerequisite before running pip to install the requisites
+  hash mysql_config || sudo apt install -y libmysqlclient-dev
+
+  # Install the requisites for this package
+  sudo pip install --upgrade --force-reinstall --requirement requirements.txt
+
+  # Run the python package installation program
+  sudo python setup.py install
+
+  if [ -n "${MI_IP}" ]
+  then
+    # Set the molteniron server IP in the conf file
+    sudo sed -i "s/127.0.0.1/${MI_IP}/g" ${MI_CONF_DIR}/conf.yaml
+  fi
+
+  export dsvm_uuid
+  # NOTE: dsvm_uuid used in the following script, hence the -E
+  sudo -E ${REPO_DIR}/nodepool/molteniron/utils/test_hook_configure_mi.sh
+) || exit $?
+```
+
+and change the MI_IP environment variable to be your MoltenIron server!
+
+During the destruction of a job, add the following snippet of bash code:
+
+```bash
+  DSVM_UUID="$(</etc/nodepool/uuid)"
+  echo "Cleaning up resources associated with node: ${DSVM_UUID}"
+  molteniron release ${DSVM_UUID}
+```

nodepool/molteniron/utils/test_hook_configure_mi.sh

@@ -0,0 +1,130 @@
+#!/bin/bash
+
+# Copyright (c) 2016 IBM Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+# implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+errcho()
+{
+  # Redirect stdout to stderr for the echo command
+  >&2 echo $@;
+}
+
+#
+# NOTE:
+#
+# This script expects the environment variable dsvm_uuid to be set!
+#
+
+if [ -z "${dsvm_uuid}" ]
+then
+  errcho "Error: environment variable unset: dsvm_uuid"
+  exit 1
+fi
+
+# Is the command-line JSON processor installed?
+hash jq || sudo apt-get install -y jq
+
+# Turn off Bash debugging temporarily to stop password being shown in log files
+set +x
+
+# allocate a BM node to a dsvm guest named dsvm_uuid, then amend the localrc
+# and hardware_info files.
+JSON_RSP=$(molteniron allocate $dsvm_uuid 1)
+
+if [ $? -gt 0 ]
+then
+  # Save the response for local debugging
+  echo "${JSON_RSP}" > /tmp/json.rsp
+
+  errcho "Error: allocate $dsvm_uuid 1"
+
+  MESSAGE=$(echo "${JSON_RSP}" | jq .message)
+
+  # Is there a message response?
+  # NOTE: jq not finding a message key returns null
+  if [ $? -eq 0 -a "${MESSAGE}" != "null" ]
+  then
+      errcho "Error: ${MESSAGE}"
+  fi
+
+  exit 1
+fi
+
+# Convert from a JSON string into a Bash array
+declare -A NODE
+while IFS="=" read -r key value
+do
+  NODE[$key]="$value"
+done < <(
+  echo ${JSON_RSP} | jq --raw-output '.nodes[]|to_entries|map("\(.key)=\(.value|tostring)")|.[]'
+  RC=$?
+  if [ ${RC} -gt 0 ]
+  then
+    echo "error=${RC}"
+  fi
+)
+
+if [ -n "${NODE[error]}" ]
+then
+  errcho "Error: jq failed to parse response"
+  errcho "jq .nodes:"
+  errcho ${JSON_RSP} | jq '.nodes[]'
+  errcho "jq .nodes|to_entries|map:"
+  errcho ${JSON_RSP} | jq --raw-output '.nodes[]|to_entries|map("\(.key)=\(.value|tostring)")|.[]'
+  exit 2
+elif [  -z "${NODE[ipmi_ip]}" \
+     -o -z "${NODE[port_hwaddr]}" \
+     -o -z "${NODE[ipmi_user]}" \
+     -o -z "${NODE[ipmi_password]}" ]
+then
+  echo "ERROR: One of NODE's ipmi_ip, port_hwaddr, ipmi_user, or ipmi_password is empty!"
+  if [ -n "${NODE[ipmi_password]}" ]
+  then
+      SAFE_PASSWORD="*hidden*"
+  else
+      SAFE_PASSWORD=""
+  fi
+  echo "NODE[ipmi_ip]       = ${NODE[ipmi_ip]}"
+  echo "NODE[port_hwaddr]   = ${NODE[port_hwaddr]}"
+  echo "NODE[ipmi_user]     = ${NODE[ipmi_user]}"
+  echo "NODE[ipmi_password] = ${SAFE_PASSWORD}"
+  echo "jq command returns:"
+  echo ${JSON_RSP} | jq --raw-output '.nodes[]|to_entries|map("\(.key)=\(.value|tostring)")|.[]'
+  exit 3
+fi
+
+# Set IPMI info file
+printf "${NODE[ipmi_ip]} ${NODE[port_hwaddr]} ${NODE[ipmi_user]} ${NODE[ipmi_password]}\\n" > "/opt/stack/new/devstack/files/hardware_info"
+
+set -x
+
+# Add the hardware properties to the localrc file
+printf "IRONIC_HW_ARCH=${NODE[cpu_arch]}\\nIRONIC_HW_NODE_CPU=${NODE[cpus]}\\nIRONIC_HW_NODE_RAM=${NODE[ram_mb]}\\nIRONIC_HW_NODE_DISK=${NODE[disk_gb]}\\n" >> "/opt/stack/new/devstack/localrc"
+
+# Add the allocation pools to the localrc
+IFS=',' read -r -a ALLOCATION_POOL <<< ${NODE[allocation_pool]}
+
+POOL=''
+for IP in ${ALLOCATION_POOL[@]}
+do
+  echo "IP=${IP}"
+  if [ -n "${POOL}" ]
+  then
+    POOL+=" --allocation-pool "
+  fi
+  POOL+="start=${IP},end=${IP}"
+done
+# append ip pools to the end of our localrc
+printf "ALLOCATION_POOL=\"${POOL}\"\n" >>  "/opt/stack/new/devstack/localrc"