# Licensed under the Apache License, Version 2.0 (the "License"); you may # not use this file except in compliance with the License. You may obtain # a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the # License for the specific language governing permissions and limitations # under the License. from oslo_config import cfg from tempest import config service_option = cfg.BoolOpt("vmware_nsx", default=True, help="Whether or not vmware_nsx is expected to be" " available") scenario_group = config.scenario_group ScenarioGroup = [ cfg.FloatOpt('waitfor_disassoc', default=15.0, help="Wait for seconds after disassociation."), cfg.FloatOpt('waitfor_assoc', default=5.0, help="Waitfor seconds after association."), cfg.FloatOpt('waitfor_connectivity', default=120.0, help="Wait for seconds to become connected."), cfg.ListOpt('outside_world_servers', default=["8.8.8.8", "8.8.4.4"], help="List of servers reside outside of openstack env." " which is used to test default gateway behavior" " when VMs are under logical routers," " & DNS are local to provider's settings."), cfg.DictOpt('flat_alloc_pool_dict', default={}, help="Define flat network ip range." " required attributes are gateway, start, end" " and cidr. Example value: gateway:10.1.1.253," " start:10.1.1.30,end:10.1.1.49,cidr=10.1.1.0/24"), cfg.DictOpt('xnet_multiple_subnets_dict', default={}, help="External network with multiple subnets." " The primary subnet ip-range will be shrinked," " This is for the 2nd subnet, required attrs:" " start:10.1.1.31,end:10.1.1.33,cidr=10.1.2.0/24" " AND limit to only 3 ip addresses defined."), ] network_group = config.network_group NetworkGroup = [ cfg.StrOpt('l2gw_switch', default='', help="Distributed Virtual Portgroup to create VLAN port."), cfg.DictOpt('l2gw_switch_dict', default={}, help="dict version of l2gw_switch:" "device_name:,interfaces:,segmentation_id:,"), cfg.StrOpt('dns_search_domain', default='vmware.com', help="a valid domain that contains host defined at" " attribute host_in_search_domain"), cfg.StrOpt('host_in_search_domain', default='mail', help="host exists in dns_search_domain"), cfg.StrOpt('public_network_cidr', default='', help="Public network cidr which provides external network" " connectivity"), cfg.StrOpt('backend', default='nsxv', help="NSX backend, valid values are nsxv|nsxv3"), ] nsxv_group = cfg.OptGroup(name='nsxv', title="NSX-v Configuration Options") NSXvGroup = [ cfg.StrOpt('manager_uri', default='https://10.0.0.10', help="NSX-v manager ip address"), cfg.StrOpt('user', default='admin', help="NSX-v manager username"), cfg.StrOpt('password', default='default', help="NSX-v manager password"), cfg.StrOpt('vdn_scope_id', default='vdnscope-1', help="NSX-v vdn scope id"), cfg.IntOpt('max_mtz', default=3, help="Max Multiple Transport Zones used for testing."), cfg.DictOpt('flat_alloc_pool_dict', default={}, help=" Define flat network ip range." " required attributes are gateway, start, end" " and cidr. Example value: gateway:10.1.1.253," " start:10.1.1.30,end:10.1.1.49,cidr=10.1.1.0/24"), cfg.StrOpt('vlan_physical_network', default='', help="physval_network to create vlan."), cfg.IntOpt('provider_vlan_id', default=888, help="The default vlan_id for admin vlan."), cfg.IntOpt('create_router_http_timeout', default=900, help="Specific for router_size tests. This value defines" " how long http.request should retry."), cfg.BoolOpt('no_router_type', default=False, help="router_type is NSXv extension." "Set it to True allow tests to remove this attribute" " when creating router."), cfg.ListOpt('bugs_to_resolve', default=[], help="Bugs to be resolved. Define this at tempest.conf and" " test case testtools.skipIf(condition, reasons) to" " skip test cannot be run at specific plugin env."), cfg.StrOpt('default_policy_id', default='', help="NSX security-policy ID used to create all tenants" " default security-group-policy." " This must be the same as the one at vmware/nsx.ini"), cfg.StrOpt('alt_policy_id', default='', help="NSX security-policy ID used to create the 2nd" " security-group-policy, and != default_policy_id."), cfg.BoolOpt('allow_tenant_rules_with_policy', default=False, help="Default=False; a tenant cannot create security-group." " If True, tenant can create non-policy security-group." " Sync this value with nsx.ini file."), ] l2gw_group = cfg.OptGroup(name='l2gw', title="l2-gateway Configuration Options") L2gwGroup = [ cfg.DictOpt('vlan_subnet_ipv4_dict', default={}, help="Tenant's VLAN subnet cdir to connect to l2gw/VXLAN." " Example: cidr=192.168.99.0/24,start:192.168.99.41" " ,end:192.168.99.50,gateway=192.168.99.253"), cfg.StrOpt('device_one_vlan', default="", help="l2g2 device with one VLAN" " l2gw-1::dvportgroup-14420|3845"), cfg.StrOpt('device_multiple_vlans', default="", help="l2gw device with multiple VLANs" " l2gw-x::dvportgroup-14429|3880#3381#3382"), cfg.StrOpt('multiple_interfaces_multiple_vlans', default="", help="l2gw multiple devices, interface has multiple VLANs" " m-ifs::dvportgroup-144|138#246;dvportgroup-155|339"), cfg.StrOpt('vlan_1', default="16", help="VLAN id"), cfg.StrOpt('vlan_2', default="17", help="VLAN id"), cfg.StrOpt("subnet_1_cidr", default="192.168.1.0/24", help="Subnet 1 network cidr." "Example: 1.1.1.0/24"), ] nsxv3_group = cfg.OptGroup(name='nsxv3', title="NSXv3 Configuration Options") NSXv3Group = [ cfg.StrOpt('nsx_manager', default='', help="NSX manager IP address"), cfg.StrOpt('nsx_user', default='admin', help="NSX manager username"), cfg.StrOpt('nsx_password', default='default', help="NSX manager password"), cfg.BoolOpt('native_dhcp_metadata', default=False, help="Enable or disable Native DHCP and MDProxy for nsxv3"), ]